- Fix possible NULL pointer dereference in trace_data_alloc()
On the error path in trace_data_alloc(), it can call trigger_data_free()
with a NULL pointer. This use to be a kfree() but was changed to
trigger_data_free() to clean up any partial initialization. The issue is
that trigger_data_free() does not expect a NULL pointer. Have
trigger_data_free() return safely on NULL pointer.
- Fix multiple events on the command line and bootconfig
If multiple events are enabled on the command line separately and not
grouped, only the last event gets enabled. That is:
trace_event=sched_switch trace_event=sched_waking
Will only enable sched_waking where as:
trace_event=sched_switch,sched_waking
Will enable both.
The bootconfig makes it even worse as the second way is the more common
method.
The issue is that a temporary buffer is used to store the events to enable
later in boot. Each time the cmdline callback is called, it overwrites
what was previously there.
Have the callback append the next value (delimited by a comma) if the
temporary buffer already has content.
- Fix command line trace_buffer_size if >= 2G
The logic to allocate the trace buffer uses "int" for the size parameter
in the command line code causing overflow issues if more that 2G is
specified.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaaxEIRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn+QAQCM6aJm0ZqDD2dM262M1mQpkU7sW3Dz
hZfBpo3YlH55fQEAklsaD96+yKN7PLl1Vh4c0zCelMHZA7kgck/3GqaFAgA=
=rn/Z
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix possible NULL pointer dereference in trace_data_alloc()
On the trace_data_alloc() error path, it can call trigger_data_free()
with a NULL pointer. This used to be a kfree() but was changed to
trigger_data_free() to clean up any partial initialization. The issue
is that trigger_data_free() does not expect a NULL pointer. Have
trigger_data_free() return safely on NULL pointer.
- Fix multiple events on the command line and bootconfig
If multiple events are enabled on the command line separately and not
grouped, only the last event gets enabled. That is:
trace_event=sched_switch trace_event=sched_waking
will only enable sched_waking whereas:
trace_event=sched_switch,sched_waking
will enable both.
The bootconfig makes it even worse as the second way is the more
common method.
The issue is that a temporary buffer is used to store the events to
enable later in boot. Each time the cmdline callback is called, it
overwrites what was previously there.
Have the callback append the next value (delimited by a comma) if the
temporary buffer already has content.
- Fix command line trace_buffer_size if >= 2G
The logic to allocate the trace buffer uses "int" for the size
parameter in the command line code causing overflow issues if more
that 2G is specified.
* tag 'trace-v7.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix trace_buf_size= cmdline parameter with sizes >= 2G
tracing: Fix enabling multiple events on the kernel command line and bootconfig
tracing: Add NULL pointer check to trigger_data_free()
Fix an inconsistency between func_states_equal() and
collect_linked_regs():
- regsafe() uses check_ids() to verify that cached and current states
have identical register id mapping.
- func_states_equal() calls regsafe() only for registers computed as
live by compute_live_registers().
- clean_live_states() is supposed to remove dead registers from cached
states, but it can skip states belonging to an iterator-based loop.
- collect_linked_regs() collects all registers sharing the same id,
ignoring the marks computed by compute_live_registers().
Linked registers are stored in the state's jump history.
- backtrack_insn() marks all linked registers for an instruction
as precise whenever one of the linked registers is precise.
The above might lead to a scenario:
- There is an instruction I with register rY known to be dead at I.
- Instruction I is reached via two paths: first A, then B.
- On path A:
- There is an id link between registers rX and rY.
- Checkpoint C is created at I.
- Linked register set {rX, rY} is saved to the jump history.
- rX is marked as precise at I, causing both rX and rY
to be marked precise at C.
- On path B:
- There is no id link between registers rX and rY,
otherwise register states are sub-states of those in C.
- Because rY is dead at I, check_ids() returns true.
- Current state is considered equal to checkpoint C,
propagate_precision() propagates spurious precision
mark for register rY along the path B.
- Depending on a program, this might hit verifier_bug()
in the backtrack_insn(), e.g. if rY ∈ [r1..r5]
and backtrack_insn() spots a function call.
The reproducer program is in the next patch.
This was hit by sched_ext scx_lavd scheduler code.
Changes in tests:
- verifier_scalar_ids.c selftests need modification to preserve
some registers as live for __msg() checks.
- exceptions_assert.c adjusted to match changes in the verifier log,
R0 is dead after conditional instruction and thus does not get
range.
- precise.c adjusted to match changes in the verifier log, register r9
is dead after comparison and it's range is not important for test.
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Fixes: 0fb3cf6110 ("bpf: use register liveness information for func_states_equal")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-linked-regs-and-propagate-precision-v1-1-18e859be570d@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some of the sizing logic through tracer_alloc_buffers() uses int
internally, causing unexpected behavior if the user passes a value that
does not fit in an int (on my x86 machine, the result is uselessly tiny
buffers).
Fix by plumbing the parameter's real type (unsigned long) through to the
ring buffer allocation functions, which already use unsigned long.
It has always been possible to create larger ring buffers via the sysfs
interface: this only affects the cmdline parameter.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/bff42a4288aada08bdf74da3f5b67a2c28b761f8.1772852067.git.calvin@wbinvd.org
Fixes: 73c5162aa3 ("tracing: keep ring buffer to minimum size till used")
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Same as in __reg64_deduce_bounds(), refine s32/u32 ranges
in __reg32_deduce_bounds() in the following situations:
- s32 range crosses U32_MAX/0 boundary, positive part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxx s32 range xxxxxxxxx] [xxxxxxx|
0 S32_MAX S32_MIN -1
- s32 range crosses U32_MAX/0 boundary, negative part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxxxxxx] [xxxxxxxxxxxx s32 range |
0 S32_MAX S32_MIN -1
- No refinement if ranges overlap in two intervals.
This helps for e.g. consider the following program:
call %[bpf_get_prandom_u32];
w0 &= 0xffffffff;
if w0 < 0x3 goto 1f; // on fall-through u32 range [3..U32_MAX]
if w0 s> 0x1 goto 1f; // on fall-through s32 range [S32_MIN..1]
if w0 s< 0x0 goto 1f; // range can be narrowed to [S32_MIN..-1]
r10 = 0;
1: ...;
The reg_bounds.c selftest is updated to incorporate identical logic,
refinement based on non-overflowing range halves:
((x ∩ [0, smax]) ∩ (y ∩ [0, smax])) ∪
((x ∩ [smin,-1]) ∩ (y ∩ [smin,-1]))
Reported-by: Andrea Righi <arighi@nvidia.com>
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Closes: https://lore.kernel.org/bpf/aakqucg4vcujVwif@gpd4/T/
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-bpf-32-bit-range-overflow-v3-1-f7f67e060a6b@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Multiple events can be enabled on the kernel command line via a comma
separator. But if the are specified one at a time, then only the last
event is enabled. This is because the event names are saved in a temporary
buffer, and each call by the init cmdline code will reset that buffer.
This also affects names in the boot config file, as it may call the
callback multiple times with an example of:
kernel.trace_event = ":mod:rproc_qcom_common", ":mod:qrtr", ":mod:qcom_aoss"
Change the cmdline callback function to append a comma and the next value
if the temporary buffer already has content.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260302-trace-events-allow-multiple-modules-v1-1-ce4436e37fb8@oss.qualcomm.com
Signed-off-by: Andrei-Alexandru Tachici <andrei-alexandru.tachici@oss.qualcomm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20260305193339.2810953-1-linux@roeck-us.net
Fixes: 0550069cc2 ("tracing: Properly process error handling in event_hist_trigger_parse()")
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=NNcQ
-----END PGP SIGNATURE-----
Merge tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Improve quirk visibility and configurability (Maurizio)
- Fix runtime user modification to queue setup (Keith)
- Fix multipath leak on try_module_get failure (Keith)
- Ignore ambiguous spec definitions for better atomics support
(John)
- Fix admin queue leak on controller reset (Ming)
- Fix large allocation in persistent reservation read keys
(Sungwoo Kim)
- Fix fcloop callback handling (Justin)
- Securely free DHCHAP secrets (Daniel)
- Various cleanups and typo fixes (John, Wilfred)
- Avoid a circular lock dependency issue in the sysfs nr_requests or
scheduler store handling
- Fix a circular lock dependency with the pcpu mutex and the queue
freeze lock
- Cleanup for bio_copy_kern(), using __bio_add_page() rather than the
bio_add_page(), as adding a page here cannot fail. The exiting code
had broken cleanup for the error condition, so make it clear that the
error condition cannot happen
- Fix for a __this_cpu_read() in preemptible context splat
* tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: use trylock to avoid lockdep circular dependency in sysfs
nvme: fix memory allocation in nvme_pr_read_keys()
block: use __bio_add_page in bio_copy_kern
block: break pcpu_alloc_mutex dependency on freeze_lock
blktrace: fix __this_cpu_read/write in preemptible context
nvme-multipath: fix leak on try_module_get failure
nvmet-fcloop: Check remoteport port_state before calling done callback
nvme-pci: do not try to add queue maps at runtime
nvme-pci: cap queue creation to used queues
nvme-pci: ensure we're polling a polled queue
nvme: fix memory leak in quirks_param_set()
nvme: correct comment about nvme_ns_remove()
nvme: stop setting namespace gendisk device driver data
nvme: add support for dynamic quirk configuration via module parameter
nvme: fix admin queue leak on controller reset
nvme-fabrics: use kfree_sensitive() for DHCHAP secrets
nvme: stop using AWUPF
nvme: expose active quirks in sysfs
nvme/host: fixup some typos
kthread_exit became a macro to do_exit in commit 28aaa9c399
("kthread: consolidate kthread exit paths to prevent use-after-free"),
so there is no kthread_exit function BTF ID to resolve. Remove it from
noreturn_deny to avoid resolve_btfids unresolved symbol warnings.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what functions
to ignore. The trace_graph_return() was updated to handle this, but
when function_graph tracer is using a threshold (only trace functions
that took longer than a specified time), it uses
trace_graph_thresh_return() instead. This function was still incorrectly
using the task struct recursion word causing the function graph tracer to
permanently set all functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of being
on the fgraph descriptor, the calculations for the amount of sleep time
was updated. The calculation was done in the trace_graph_thresh_return()
function, which also called the trace_graph_return(), which did the
calculation again, causing the time to be doubled.
Remove the call to trace_graph_return() as what it needed to do wasn't
that much, and just do the work in trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the raw_syscall
tracepoints. When the first syscall event is enabled, it enables the
raw_syscall tracepoint and doesn't need to do anything when a second
syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init.
This is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different
types of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled. The problem happened is that this
"disable-enable" is done one at a time. If more than one syscall event
is specified on the command line, by disabling them one at a time,
the counter never gets to zero, and the raw_syscall is not disabled and
enabled, keeping the syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will ensure
the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables protected
by RCU (preemption disabled). Now that tracepoint callbacks are called with
preemption enabled, this protection needs to be added explicitly, and
not depend on the functions being called with preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY. But
this does not prevent the application from calling madvise(MADVISE_DOFORK).
This causes the mapping to be copied on fork. After the first tasks exits,
the mapping is considered unmapped by everyone. But when he second task
exits, the counter goes below zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace ring
buffer (although two mappings may mess each other up), there's no reason
to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get all
*ftrace* files.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaamiIBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qulnAP9ZO6iChQL0hX/Xuu2VyRhVz0Svf8Sg
iq2IUHP48twOogEApR4zeelMORxdKqkLR+BajZUVFR1PukVbMaszPr9GoQw=
=H9pj
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what
functions to ignore. The trace_graph_return() was updated to handle
this, but when function_graph tracer is using a threshold (only trace
functions that took longer than a specified time), it uses
trace_graph_thresh_return() instead.
This function was still incorrectly using the task struct recursion
word causing the function graph tracer to permanently set all
functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of
being on the fgraph descriptor, the calculations for the amount of
sleep time was updated. The calculation was done in the
trace_graph_thresh_return() function, which also called the
trace_graph_return(), which did the calculation again, causing the
time to be doubled.
Remove the call to trace_graph_return() as what it needed to do
wasn't that much, and just do the work in
trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the
raw_syscall tracepoints. When the first syscall event is enabled, it
enables the raw_syscall tracepoint and doesn't need to do anything
when a second syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init. This
is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different types
of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled.
The problem happened is that this "disable-enable" is done one at a
time. If more than one syscall event is specified on the command
line, by disabling them one at a time, the counter never gets to
zero, and the raw_syscall is not disabled and enabled, keeping the
syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will
ensure the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables
protected by RCU (preemption disabled). Now that tracepoint callbacks
are called with preemption enabled, this protection needs to be added
explicitly, and not depend on the functions being called with
preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY.
But this does not prevent the application from calling
madvise(MADVISE_DOFORK). This causes the mapping to be copied on
fork. After the first tasks exits, the mapping is considered unmapped
by everyone. But when he second task exits, the counter goes below
zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace
ring buffer (although two mappings may mess each other up), there's
no reason to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get
all *ftrace* files.
* tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MAINTAINERS entries for all ftrace headers
tracing: Fix WARN_ON in tracing_buffers_mmap_close
tracing: Disable preemption in the tracepoint callbacks handling filtered pids
ftrace: Disable preemption in the tracepoint callbacks handling filtered pids
tracing: Fix syscall events activation by ensuring refcount hits zero
fgraph: Fix thresh_return nosleeptime double-adjust
fgraph: Fix thresh_return clear per-task notrace
- Fix a potential kernel panic in the module loader by adding a bounds
check for the ELF section index. This prevents crashes if attempting
to load a module that uses SHN_XINDEX or is corrupted.
- Fix the Kconfig menu layout for module versioning, signing, and
compression options so they correctly appear as submenus in menuconfig.
- Remove a redundant lockdep_free_key_range() call in the load_module()
error path. This is already handled by module_deallocate() calling
free_mod_mem() since the module_memory rework.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSE9au1u/dCZerzchhaByWrOaGnegUCaaeC1QAKCRBaByWrOaGn
enQ7AQCJWZPofsDiEN2GZsupXsMMn1kt4xkimGGlb55Fwq1/pQD+OfczUt63MBst
dwMJuaW4ndRQLRXFQHpoa441zjFCcgw=
=CkAk
-----END PGP SIGNATURE-----
Merge tag 'modules-7.0-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module fixes from Sami Tolvanen:
- Fix a potential kernel panic in the module loader by adding a bounds
check for the ELF section index. This prevents crashes if attempting
to load a module that uses SHN_XINDEX or is corrupted.
- Fix the Kconfig menu layout for module versioning, signing, and
compression options so they correctly appear as submenus in
menuconfig.
- Remove a redundant lockdep_free_key_range() call in the load_module()
error path. This is already handled by module_deallocate() calling
free_mod_mem() since the module_memory rework.
* tag 'modules-7.0-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: Fix kernel panic when a symbol st_shndx is out of bounds
module: Fix the modversions and signing submenus
module: Remove duplicate freeing of lockdep classes
* Fix error when reporting jiffies converted values back to user space
Return the converted value instead of "Invalid argument" error.
* Testing
Spent around a week in linux-next -enough for this small fix-
-----BEGIN PGP SIGNATURE-----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=F0SK
-----END PGP SIGNATURE-----
Merge tag 'sysctl-7.00-fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl fix from Joel Granados:
- Fix error when reporting jiffies converted values back to user space
Return the converted value instead of "Invalid argument" error
* tag 'sysctl-7.00-fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
time/jiffies: Fix sysctl file error on configurations where USER_HZ < HZ
Commit 2dc164a48e ("sysctl: Create converter functions with two new
macros") incorrectly returns error to user space when jiffies sysctl
converter is used. The old overflow check got replaced with an
unconditional one:
+ if (USER_HZ < HZ)
+ return -EINVAL;
which will always be true on configurations with "USER_HZ < HZ".
Remove the check; it is no longer needed as clock_t_to_jiffies() returns
ULONG_MAX for the overflow case and proc_int_u2k_conv_uop() checks for
"> INT_MAX" after conversion
Fixes: 2dc164a48e ("sysctl: Create converter functions with two new macros")
Reported-by: Colm Harrington <colm.harrington@oracle.com>
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://patch.msgid.link/20260227025842.1085206-1-wangqing7171@gmail.com
Fixes: cf9f0f7c4c ("tracing: Allow user-space mapping of the ring-buffer")
Reported-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b5dd2030fe08afdf65d
Tested-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When function trace PID filtering is enabled, the function tracer will
attach a callback to the fork tracepoint as well as the exit tracepoint
that will add the forked child PID to the PID filtering list as well as
remove the PID that is exiting.
Commit a46023d561 ("tracing: Guard __DECLARE_TRACE() use of
__DO_TRACE_CALL() with SRCU-fast") removed the disabling of preemption
when calling tracepoint callbacks.
The callbacks used for the PID filtering accounting depended on preemption
being disabled, and now the trigger a "suspicious RCU usage" warning message.
Make them explicitly disable preemption.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260302213546.156e3e4f@gandalf.local.home
Fixes: a46023d561 ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When multiple syscall events are specified in the kernel command line
(e.g., trace_event=syscalls:sys_enter_openat,syscalls:sys_enter_close),
they are often not captured after boot, even though they appear enabled
in the tracing/set_event file.
The issue stems from how syscall events are initialized. Syscall
tracepoints require the global reference count (sys_tracepoint_refcount)
to transition from 0 to 1 to trigger the registration of the syscall
work (TIF_SYSCALL_TRACEPOINT) for tasks, including the init process (pid 1).
The current implementation of early_enable_events() with disable_first=true
used an interleaved sequence of "Disable A -> Enable A -> Disable B -> Enable B".
If multiple syscalls are enabled, the refcount never drops to zero,
preventing the 0->1 transition that triggers actual registration.
Fix this by splitting early_enable_events() into two distinct phases:
1. Disable all events specified in the buffer.
2. Enable all events specified in the buffer.
This ensures the refcount hits zero before re-enabling, allowing syscall
events to be properly activated during early boot.
The code is also refactored to use a helper function to avoid logic
duplication between the disable and enable phases.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260224023544.1250787-1-hehuiwen@kylinos.cn
Fixes: ce1039bd3a ("tracing: Fix enabling of syscall events on the command line")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
trace_graph_thresh_return() called handle_nosleeptime() and then delegated
to trace_graph_return(), which calls handle_nosleeptime() again. When
sleep-time accounting is disabled this double-adjusts calltime and can
produce bogus durations (including underflow).
Fix this by computing rettime once, applying handle_nosleeptime() only
once, using the adjusted calltime for threshold comparison, and writing
the return event directly via __trace_graph_return() when the threshold is
met.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113314048jE4VRwIyZEALiYByGK0My@zte.com.cn
Fixes: 3c9880f3ab ("ftrace: Use a running sleeptime instead of saving on shadow stack")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When tracing_thresh is enabled, function graph tracing uses
trace_graph_thresh_return() as the return handler. Unlike
trace_graph_return(), it did not clear the per-task TRACE_GRAPH_NOTRACE
flag set by the entry handler for set_graph_notrace addresses. This could
leave the task permanently in "notrace" state and effectively disable
function graph tracing for that task.
Mirror trace_graph_return()'s per-task notrace handling by clearing
TRACE_GRAPH_NOTRACE and returning early when set.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113007819YgrZsMGABff4Rc-O_fZxL@zte.com.cn
Fixes: b84214890a ("function_graph: Move graph notrace bit to shadow stack global var")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations.
Fixes: 69fd337a97 ("bpf: per-cgroup lsm flavor")
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/3c4ebb0b.46ff8.19abab8abe2.Coremail.kaiyanm@hust.edu.cn/
Signed-off-by: Lang Xu <xulang@uniontech.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/279EEE1BA1DDB49D+20260303095217.34436-1-xulang@uniontech.com
- Fix circular locking dependency in cpuset partition code by deferring
housekeeping_update() calls to a workqueue instead of calling them
directly under cpus_read_lock.
- Fix null-ptr-deref in rebuild_sched_domains_cpuslocked() when
generate_sched_domains() returns NULL due to kmalloc failure.
- Fix incorrect cpuset behavior for effective_xcpus in
partition_xcpus_del() and cpuset_update_tasks_cpumask() in
update_cpumasks_hier().
- Fix race between task migration and cgroup iteration.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaadVVQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGef0AQDLuJE3vzc2VeCBc4rGcj7ZSRmc3tc28lOqHRzi
XEx1iwD+PeFcb9wt1CTqA5hAiIY1LGR/5iO1kTH7paRd16DBRAc=
=S8WE
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix circular locking dependency in cpuset partition code by
deferring housekeeping_update() calls to a workqueue instead
of calling them directly under cpus_read_lock
- Fix null-ptr-deref in rebuild_sched_domains_cpuslocked() when
generate_sched_domains() returns NULL due to kmalloc failure
- Fix incorrect cpuset behavior for effective_xcpus in
partition_xcpus_del() and cpuset_update_tasks_cpumask()
in update_cpumasks_hier()
- Fix race between task migration and cgroup iteration
* tag 'cgroup-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: fix null-ptr-deref in rebuild_sched_domains_cpuslocked
cgroup/cpuset: Call housekeeping_update() without holding cpus_read_lock
cgroup/cpuset: Defer housekeeping_update() calls from CPU hotplug to workqueue
cgroup/cpuset: Move housekeeping_update()/rebuild_sched_domains() together
kselftest/cgroup: Simplify test_cpuset_prs.sh by removing "S+" command
cgroup/cpuset: Set isolated_cpus_updating only if isolated_cpus is changed
cgroup/cpuset: Clarify exclusion rules for cpuset internal variables
cgroup/cpuset: Fix incorrect use of cpuset_update_tasks_cpumask() in update_cpumasks_hier()
cgroup/cpuset: Fix incorrect change to effective_xcpus in partition_xcpus_del()
cgroup: fix race between task migration and iteration
- Fix starvation of scx_enable() under fair-class saturation by
offloading the enable path to an RT kthread.
- Fix out-of-bounds access in idle mask initialization on systems with
non-contiguous NUMA node IDs.
- Fix a preemption window during scheduler exit and a refcount underflow
in cgroup init error path.
- Fix SCX_EFLAG_INITIALIZED being a no-op flag.
- Add READ_ONCE() annotations for KCSAN-clean lockless accesses and
replace naked scx_root dereferences with container_of() in kobject
callbacks.
- Tooling and selftest fixes: compilation issues with clang 17,
strtoul() misuse, unused options cleanup, and Kconfig sync.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaadTZA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGdf9AQDmsZ8Y3uOJV/5K5RuEoo6SDPmCjr+JXPZu45kD
+UBj3wD9F8DPq+g+KnD7jILhqUdOTePhhNrVYbVw3e1x29EYBQ0=
=nRTC
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix starvation of scx_enable() under fair-class saturation by
offloading the enable path to an RT kthread
- Fix out-of-bounds access in idle mask initialization on systems with
non-contiguous NUMA node IDs
- Fix a preemption window during scheduler exit and a refcount
underflow in cgroup init error path
- Fix SCX_EFLAG_INITIALIZED being a no-op flag
- Add READ_ONCE() annotations for KCSAN-clean lockless accesses and
replace naked scx_root dereferences with container_of() in kobject
callbacks
- Tooling and selftest fixes: compilation issues with clang 17,
strtoul() misuse, unused options cleanup, and Kconfig sync
* tag 'sched_ext-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix starvation of scx_enable() under fair-class saturation
sched_ext: Remove redundant css_put() in scx_cgroup_init()
selftests/sched_ext: Fix peek_dsq.bpf.c compile error for clang 17
selftests/sched_ext: Add -fms-extensions to bpf build flags
tools/sched_ext: Add -fms-extensions to bpf build flags
sched_ext: Use READ_ONCE() for plain reads of scx_watchdog_timeout
sched_ext: Replace naked scx_root dereferences in kobject callbacks
sched_ext: Use READ_ONCE() for the read side of dsq->nr update
tools/sched_ext: fix strtoul() misuse in scx_hotplug_seq()
sched_ext: Fix SCX_EFLAG_INITIALIZED being a no-op flag
sched_ext: Fix out-of-bounds access in scx_idle_init_masks()
sched_ext: Disable preemption between scx_claim_exit() and kicking helper work
tools/sched_ext: Add Kconfig to sync with upstream
tools/sched_ext: Sync README.md Kconfig with upstream scx
selftests/sched_ext: Remove duplicated unistd.h include in rt_stall.c
tools/sched_ext: scx_sdt: Remove unused '-f' option
tools/sched_ext: scx_central: Remove unused '-p' option
selftests/sched_ext: Fix unused-result warning for read()
selftests/sched_ext: Abort test loop on signal
During scx_enable(), the READY -> ENABLED task switching loop changes the
calling thread's sched_class from fair to ext. Since fair has higher
priority than ext, saturating fair-class workloads can indefinitely starve
the enable thread, hanging the system. This was introduced when the enable
path switched from preempt_disable() to scx_bypass() which doesn't protect
against fair-class starvation. Note that the original preempt_disable()
protection wasn't complete either - in partial switch modes, the calling
thread could still be starved after preempt_enable() as it may have been
switched to ext class.
Fix it by offloading the enable body to a dedicated system-wide RT
(SCHED_FIFO) kthread which cannot be starved by either fair or ext class
tasks. scx_enable() lazily creates the kthread on first use and passes the
ops pointer through a struct scx_enable_cmd containing the kthread_work,
then synchronously waits for completion.
The workfn runs on a different kthread from sch->helper (which runs
disable_work), so it can safely flush disable_work on the error path
without deadlock.
Fixes: 8c2090c504 ("sched_ext: Initialize in bypass mode")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Tejun Heo <tj@kernel.org>
The iterator css_for_each_descendant_pre() walks the cgroup hierarchy
under cgroup_lock(). It does not increment the reference counts on
yielded css structs.
According to the cgroup documentation, css_put() should only be used
to release a reference obtained via css_get() or css_tryget_online().
Since the iterator does not use either of these to acquire a reference,
calling css_put() in the error path of scx_cgroup_init() causes a
refcount underflow.
Remove the unbalanced css_put() to prevent a potential Use-After-Free
(UAF) vulnerability.
Fixes: 8195136669 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_watchdog_timeout is written with WRITE_ONCE() in scx_enable():
WRITE_ONCE(scx_watchdog_timeout, timeout);
However, three read-side accesses use plain reads without the matching
READ_ONCE():
/* check_rq_for_timeouts() - L2824 */
last_runnable + scx_watchdog_timeout
/* scx_watchdog_workfn() - L2852 */
scx_watchdog_timeout / 2
/* scx_enable() - L5179 */
scx_watchdog_timeout / 2
The KCSAN documentation requires that if one accessor uses WRITE_ONCE()
to annotate lock-free access, all other accesses must also use the
appropriate accessor. Plain reads alongside WRITE_ONCE() leave the pair
incomplete and can trigger KCSAN warnings.
Note that scx_tick() already uses the correct READ_ONCE() annotation:
last_check + READ_ONCE(scx_watchdog_timeout)
Fix the three remaining plain reads to match, making all accesses to
scx_watchdog_timeout consistently annotated and KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_attr_ops_show() and scx_uevent() access scx_root->ops.name directly.
This is problematic for two reasons:
1. The file-level comment explicitly identifies naked scx_root
dereferences as a temporary measure that needs to be replaced
with proper per-instance access.
2. scx_attr_events_show(), the neighboring sysfs show function in
the same group, already uses the correct pattern:
struct scx_sched *sch = container_of(kobj, struct scx_sched, kobj);
Having inconsistent access patterns in the same sysfs/uevent
group is error-prone.
The kobject embedded in struct scx_sched is initialized as:
kobject_init_and_add(&sch->kobj, &scx_ktype, NULL, "root");
so container_of(kobj, struct scx_sched, kobj) correctly retrieves
the owning scx_sched instance in both callbacks.
Replace the naked scx_root dereferences with container_of()-based
access, consistent with scx_attr_events_show() and in preparation
for proper multi-instance scx_sched support.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_bpf_dsq_nr_queued() reads dsq->nr via READ_ONCE() without holding
any lock, making dsq->nr a lock-free concurrently accessed variable.
However, dsq_mod_nr(), the sole writer of dsq->nr, only uses
WRITE_ONCE() on the write side without the matching READ_ONCE() on the
read side:
WRITE_ONCE(dsq->nr, dsq->nr + delta);
^^^^^^^
plain read -- KCSAN data race
The KCSAN documentation requires that if one accessor uses READ_ONCE()
or WRITE_ONCE() on a variable to annotate lock-free access, all other
accesses must also use the appropriate accessor. A plain read on the
right-hand side of WRITE_ONCE() leaves the pair incomplete and will
trigger KCSAN warnings.
Fix by using READ_ONCE() for the read side of the update:
WRITE_ONCE(dsq->nr, READ_ONCE(dsq->nr) + delta);
This is consistent with scx_bpf_dsq_nr_queued() and makes the
concurrent access annotation complete and KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
for the common HZ=100, 250 or 1000 cases, only inlining them
for odd HZ values like HZ=300.
The inlining overhead showed up in performance tests of the TCP code.
(Marked as an RFC pull request, as it's not a regression.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=duTI
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Improve the inlining of jiffies_to_msecs() and jiffies_to_usecs(), for
the common HZ=100, 250 or 1000 cases. Only use a function call for odd
HZ values like HZ=300 that generate more code.
The function call overhead showed up in performance tests of the TCP
code"
* tag 'timers-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/jiffies: Inline jiffies_to_msecs() and jiffies_to_usecs()
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected
un-inlining, which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and
want to avoid. The visible ugliness of the new reserved field
will be avoided the next time the RSEQ area is extended.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Nxqx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix zero_vruntime tracking when there's a single task running
- Fix slice protection logic
- Fix the ->vprot logic for reniced tasks
- Fix lag clamping in mixed slice workloads
- Fix objtool uaccess warning (and bug) in the
!CONFIG_RSEQ_SLICE_EXTENSION case caused by unexpected un-inlining,
which triggers with older compilers
- Fix a comment in the rseq registration rseq_size bound check code
- Fix a legacy RSEQ ABI quirk that handled 32-byte area sizes
differently, which special size we now reached naturally and want to
avoid. The visible ugliness of the new reserved field will be avoided
the next time the RSEQ area is extended.
* tag 'sched-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: slice ext: Ensure rseq feature size differs from original rseq size
rseq: Clarify rseq registration rseq_size bound check comment
sched/core: Fix wakeup_preempt's next_class tracking
rseq: Mark rseq_arm_slice_extension_timer() __always_inline
sched/fair: Fix lag clamp
sched/eevdf: Update se->vprot in reweight_entity()
sched/fair: Only set slice protection at pick time
sched/fair: Fix zero_vruntime tracking
- Fix lock ordering bug found by lockdep in perf_event_wakeup()
- Fix uncore counter enumeration on Granite Rapids and Sierra Forest
- Fix perf_mmap() refcount bug found by Syzkaller
- Fix __perf_event_overflow() vs. perf_remove_from_context() race
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0JyK
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix lock ordering bug found by lockdep in perf_event_wakeup()
- Fix uncore counter enumeration on Granite Rapids and Sierra Forest
- Fix perf_mmap() refcount bug found by Syzkaller
- Fix __perf_event_overflow() vs perf_remove_from_context() race
* tag 'perf-urgent-2026-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix __perf_event_overflow() vs perf_remove_from_context() race
perf/core: Fix refcount bug and potential UAF in perf_mmap
perf/x86/intel/uncore: Add per-scheduler IMC CAS count events
perf/core: Fix invalid wait context in ctx_sched_in()
-----BEGIN PGP SIGNATURE-----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=fj3P
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix alignment of arm64 JIT buffer to prevent atomic tearing (Fuad
Tabba)
- Fix invariant violation for single value tnums in the verifier
(Harishankar Vishwanathan, Paul Chaignon)
- Fix a bunch of issues found by ASAN in selftests/bpf (Ihor Solodrai)
- Fix race in devmpa and cpumap on PREEMPT_RT (Jiayuan Chen)
- Fix show_fdinfo of kprobe_multi when cookies are not present (Jiri
Olsa)
- Fix race in freeing special fields in BPF maps to prevent memory
leaks (Kumar Kartikeya Dwivedi)
- Fix OOB read in dmabuf_collector (T.J. Mercier)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (36 commits)
selftests/bpf: Avoid simplification of crafted bounds test
selftests/bpf: Test refinement of single-value tnum
bpf: Improve bounds when tnum has a single possible value
bpf: Introduce tnum_step to step through tnum's members
bpf: Fix race in devmap on PREEMPT_RT
bpf: Fix race in cpumap on PREEMPT_RT
selftests/bpf: Add tests for special fields races
bpf: Retire rcu_trace_implies_rcu_gp() from local storage
bpf: Delay freeing fields in local storage
bpf: Lose const-ness of map in map_check_btf()
bpf: Register dtor for freeing special fields
selftests/bpf: Fix OOB read in dmabuf_collector
selftests/bpf: Fix a memory leak in xdp_flowtable test
bpf: Fix stack-out-of-bounds write in devmap
bpf: Fix kprobe_multi cookies access in show_fdinfo callback
bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing
selftests/bpf: Don't override SIGSEGV handler with ASAN
selftests/bpf: Check BPFTOOL env var in detect_bpftool_path()
selftests/bpf: Fix out-of-bounds array access bugs reported by ASAN
selftests/bpf: Fix array bounds warning in jit_disasm_helpers
...
We're hitting an invariant violation in Cilium that sometimes leads to
BPF programs being rejected and Cilium failing to start [1]. The
following extract from verifier logs shows what's happening:
from 201 to 236: R1=0 R6=ctx() R7=1 R9=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100)) R10=fp0
236: R1=0 R6=ctx() R7=1 R9=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100)) R10=fp0
; if (magic == MARK_MAGIC_HOST || magic == MARK_MAGIC_OVERLAY || magic == MARK_MAGIC_ENCRYPT) @ bpf_host.c:1337
236: (16) if w9 == 0xe00 goto pc+45 ; R9=scalar(smin=umin=smin32=umin32=3585,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100))
237: (16) if w9 == 0xf00 goto pc+1
verifier bug: REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0xe01, 0xe00] s64=[0xe01, 0xe00] u32=[0xe01, 0xe00] s32=[0xe01, 0xe00] var_off=(0xe00, 0x0)
We reach instruction 236 with two possible values for R9, 0xe00 and
0xf00. This is perfectly reflected in the tnum, but of course the ranges
are less accurate and cover [0xe00; 0xf00]. Taking the fallthrough path
at instruction 236 allows the verifier to reduce the range to
[0xe01; 0xf00]. The tnum is however not updated.
With these ranges, at instruction 237, the verifier is not able to
deduce that R9 is always equal to 0xf00. Hence the fallthrough pass is
explored first, the verifier refines the bounds using the assumption
that R9 != 0xf00, and ends up with an invariant violation.
This pattern of impossible branch + bounds refinement is common to all
invariant violations seen so far. The long-term solution is likely to
rely on the refinement + invariant violation check to detect dead
branches, as started by Eduard. To fix the current issue, we need
something with less refactoring that we can backport.
This patch uses the tnum_step helper introduced in the previous patch to
detect the above situation. In particular, three cases are now detected
in the bounds refinement:
1. The u64 range and the tnum only overlap in umin.
u64: ---[xxxxxx]-----
tnum: --xx----------x-
2. The u64 range and the tnum only overlap in the maximum value
represented by the tnum, called tmax.
u64: ---[xxxxxx]-----
tnum: xx-----x--------
3. The u64 range and the tnum only overlap in between umin (excluded)
and umax.
u64: ---[xxxxxx]-----
tnum: xx----x-------x-
To detect these three cases, we call tnum_step(tnum, umin), which
returns the smallest member of the tnum greater than umin, called
tnum_next here. We're in case (1) if umin is part of the tnum and
tnum_next is greater than umax. We're in case (2) if umin is not part of
the tnum and tnum_next is equal to tmax. Finally, we're in case (3) if
umin is not part of the tnum, tnum_next is inferior or equal to umax,
and calling tnum_step a second time gives us a value past umax.
This change implements these three cases. With it, the above bytecode
looks as follows:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (47) r0 |= 3584 ; R0=scalar(smin=0x8000000000000e00,umin=umin32=3584,smin32=0x80000e00,var_off=(0xe00; 0xfffffffffffff1ff))
2: (57) r0 &= 3840 ; R0=scalar(smin=umin=smin32=umin32=3584,smax=umax=smax32=umax32=3840,var_off=(0xe00; 0x100))
3: (15) if r0 == 0xe00 goto pc+2 ; R0=3840
4: (15) if r0 == 0xf00 goto pc+1
4: R0=3840
6: (95) exit
In addition to the new selftests, this change was also verified with
Agni [3]. For the record, the raw SMT is available at [4]. The property
it verifies is that: If a concrete value x is contained in all input
abstract values, after __update_reg_bounds, it will continue to be
contained in all output abstract values.
Link: https://github.com/cilium/cilium/issues/44216 [1]
Link: https://pchaigno.github.io/test-verifier-complexity.html [2]
Link: https://github.com/bpfverif/agni [3]
Link: https://pastebin.com/raw/naCfaqNx [4]
Fixes: 0df1a55afa ("bpf: Warn on internal verifier errors")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Marco Schirrmeister <mschirrmeister@gmail.com>
Co-developed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/ef254c4f68be19bd393d450188946821c588565d.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit introduces tnum_step(), a function that, when given t, and a
number z returns the smallest member of t larger than z. The number z
must be greater or equal to the smallest member of t and less than the
largest member of t.
The first step is to compute j, a number that keeps all of t's known
bits, and matches all unknown bits to z's bits. Since j is a member of
the t, it is already a candidate for result. However, we want our result
to be (minimally) greater than z.
There are only two possible cases:
(1) Case j <= z. In this case, we want to increase the value of j and
make it > z.
(2) Case j > z. In this case, we want to decrease the value of j while
keeping it > z.
(Case 1) j <= z
t = xx11x0x0
z = 10111101 (189)
j = 10111000 (184)
^
k
(Case 1.1) Let's first consider the case where j < z. We will address j
== z later.
Since z > j, there had to be a bit position that was 1 in z and a 0 in
j, beyond which all positions of higher significance are equal in j and
z. Further, this position could not have been unknown in a, because the
unknown positions of a match z. This position had to be a 1 in z and
known 0 in t.
Let k be position of the most significant 1-to-0 flip. In our example, k
= 3 (starting the count at 1 at the least significant bit). Setting (to
1) the unknown bits of t in positions of significance smaller than
k will not produce a result > z. Hence, we must set/unset the unknown
bits at positions of significance higher than k. Specifically, we look
for the next larger combination of 1s and 0s to place in those
positions, relative to the combination that exists in z. We can achieve
this by concatenating bits at unknown positions of t into an integer,
adding 1, and writing the bits of that result back into the
corresponding bit positions previously extracted from z.
>From our example, considering only positions of significance greater
than k:
t = xx..x
z = 10..1
+ 1
-----
11..0
This is the exact combination 1s and 0s we need at the unknown bits of t
in positions of significance greater than k. Further, our result must
only increase the value minimally above z. Hence, unknown bits in
positions of significance smaller than k should remain 0. We finally
have,
result = 11110000 (240)
(Case 1.2) Now consider the case when j = z, for example
t = 1x1x0xxx
z = 10110100 (180)
j = 10110100 (180)
Matching the unknown bits of the t to the bits of z yielded exactly z.
To produce a number greater than z, we must set/unset the unknown bits
in t, and *all* the unknown bits of t candidates for being set/unset. We
can do this similar to Case 1.1, by adding 1 to the bits extracted from
the masked bit positions of z. Essentially, this case is equivalent to
Case 1.1, with k = 0.
t = 1x1x0xxx
z = .0.1.100
+ 1
---------
.0.1.101
This is the exact combination of bits needed in the unknown positions of
t. After recalling the known positions of t, we get
result = 10110101 (181)
(Case 2) j > z
t = x00010x1
z = 10000010 (130)
j = 10001011 (139)
^
k
Since j > z, there had to be a bit position which was 0 in z, and a 1 in
j, beyond which all positions of higher significance are equal in j and
z. This position had to be a 0 in z and known 1 in t. Let k be the
position of the most significant 0-to-1 flip. In our example, k = 4.
Because of the 0-to-1 flip at position k, a member of t can become
greater than z if the bits in positions greater than k are themselves >=
to z. To make that member *minimally* greater than z, the bits in
positions greater than k must be exactly = z. Hence, we simply match all
of t's unknown bits in positions more significant than k to z's bits. In
positions less significant than k, we set all t's unknown bits to 0
to retain minimality.
In our example, in positions of greater significance than k (=4),
t=x000. These positions are matched with z (1000) to produce 1000. In
positions of lower significance than k, t=10x1. All unknown bits are set
to 0 to produce 1001. The final result is:
result = 10001001 (137)
This concludes the computation for a result > z that is a member of t.
The procedure for tnum_step() in this commit implements the idea
described above. As a proof of correctness, we verified the algorithm
against a logical specification of tnum_step. The specification asserts
the following about the inputs t, z and output res that:
1. res is a member of t, and
2. res is strictly greater than z, and
3. there does not exist another value res2 such that
3a. res2 is also a member of t, and
3b. res2 is greater than z
3c. res2 is smaller than res
We checked the implementation against this logical specification using
an SMT solver. The verification formula in SMTLIB format is available
at [1]. The verification returned an "unsat": indicating that no input
assignment exists for which the implementation and the specification
produce different outputs.
In addition, we also automatically generated the logical encoding of the
C implementation using Agni [2] and verified it against the same
specification. This verification also returned an "unsat", confirming
that the implementation is equivalent to the specification. The formula
for this check is also available at [3].
Link: https://pastebin.com/raw/2eRWbiit [1]
Link: https://github.com/bpfverif/agni [2]
Link: https://pastebin.com/raw/EztVbBJ2 [3]
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Link: https://lore.kernel.org/r/93fdf71910411c0f19e282ba6d03b4c65f9c5d73.1772225741.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On PREEMPT_RT kernels, the per-CPU xdp_dev_bulk_queue (bq) can be
accessed concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __dev_flush() run atomically
with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_xmit_all(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double-free / use-after-free on bq->q[]: bq_xmit_all() snapshots
cnt = bq->count, then iterates bq->q[0..cnt-1] to transmit frames.
If preempted after the snapshot, a second task can call bq_enqueue()
-> bq_xmit_all() on the same bq, transmitting (and freeing) the
same frames. When the first task resumes, it operates on stale
pointers in bq->q[], causing use-after-free.
2. bq->count and bq->q[] corruption: concurrent bq_enqueue() modifying
bq->count and bq->q[] while bq_xmit_all() is reading them.
3. dev_rx/xdp_prog teardown race: __dev_flush() clears bq->dev_rx and
bq->xdp_prog after bq_xmit_all(). If preempted between
bq_xmit_all() return and bq->dev_rx = NULL, a preempting
bq_enqueue() sees dev_rx still set (non-NULL), skips adding bq to
the flush_list, and enqueues a frame. When __dev_flush() resumes,
it clears dev_rx and removes bq from the flush_list, orphaning the
newly enqueued frame.
4. __list_del_clearprev() on flush_node: similar to the cpumap race,
both tasks can call __list_del_clearprev() on the same flush_node,
the second dereferences the prev pointer already set to NULL.
The race between task A (__dev_flush -> bq_xmit_all) and task B
(bq_enqueue -> bq_xmit_all) on the same CPU:
Task A (xdp_do_flush) Task B (ndo_xdp_xmit redirect)
---------------------- --------------------------------
__dev_flush(flush_list)
bq_xmit_all(bq)
cnt = bq->count /* e.g. 16 */
/* start iterating bq->q[] */
<-- CFS preempts Task A -->
bq_enqueue(dev, xdpf)
bq->count == DEV_MAP_BULK_SIZE
bq_xmit_all(bq, 0)
cnt = bq->count /* same 16! */
ndo_xdp_xmit(bq->q[])
/* frames freed by driver */
bq->count = 0
<-- Task A resumes -->
ndo_xdp_xmit(bq->q[])
/* use-after-free: frames already freed! */
Fix this by adding a local_lock_t to xdp_dev_bulk_queue and acquiring
it in bq_enqueue() and __dev_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq.
Fixes: 3253cb49cb ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260225121459.183121-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On PREEMPT_RT kernels, the per-CPU xdp_bulk_queue (bq) can be accessed
concurrently by multiple preemptible tasks on the same CPU.
The original code assumes bq_enqueue() and __cpu_map_flush() run
atomically with respect to each other on the same CPU, relying on
local_bh_disable() to prevent preemption. However, on PREEMPT_RT,
local_bh_disable() only calls migrate_disable() (when
PREEMPT_RT_NEEDS_BH_LOCK is not set) and does not disable
preemption, which allows CFS scheduling to preempt a task during
bq_flush_to_queue(), enabling another task on the same CPU to enter
bq_enqueue() and operate on the same per-CPU bq concurrently.
This leads to several races:
1. Double __list_del_clearprev(): after bq->count is reset in
bq_flush_to_queue(), a preempting task can call bq_enqueue() ->
bq_flush_to_queue() on the same bq when bq->count reaches
CPU_MAP_BULK_SIZE. Both tasks then call __list_del_clearprev()
on the same bq->flush_node, the second call dereferences the
prev pointer that was already set to NULL by the first.
2. bq->count and bq->q[] races: concurrent bq_enqueue() can corrupt
the packet queue while bq_flush_to_queue() is processing it.
The race between task A (__cpu_map_flush -> bq_flush_to_queue) and
task B (bq_enqueue -> bq_flush_to_queue) on the same CPU:
Task A (xdp_do_flush) Task B (cpu_map_enqueue)
---------------------- ------------------------
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush bq->q[] to ptr_ring */
bq->count = 0
spin_unlock(&q->producer_lock)
bq_enqueue(rcpu, xdpf)
<-- CFS preempts Task A --> bq->q[bq->count++] = xdpf
/* ... more enqueues until full ... */
bq_flush_to_queue(bq)
spin_lock(&q->producer_lock)
/* flush to ptr_ring */
spin_unlock(&q->producer_lock)
__list_del_clearprev(flush_node)
/* sets flush_node.prev = NULL */
<-- Task A resumes -->
__list_del_clearprev(flush_node)
flush_node.prev->next = ...
/* prev is NULL -> kernel oops */
Fix this by adding a local_lock_t to xdp_bulk_queue and acquiring it
in bq_enqueue() and __cpu_map_flush(). These paths already run under
local_bh_disable(), so use local_lock_nested_bh() which on non-RT is
a pure annotation with no overhead, and on PREEMPT_RT provides a
per-CPU sleeping lock that serializes access to the bq.
To reproduce, insert an mdelay(100) between bq->count = 0 and
__list_del_clearprev() in bq_flush_to_queue(), then run reproducer
provided by syzkaller.
Fixes: 3253cb49cb ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT")
Reported-by: syzbot+2b3391f44313b3983e91@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69369331.a70a0220.38f243.009d.GAE@google.com/T/
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260225121459.183121-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This assumption will always hold going forward, hence just remove the
various checks and assume it is true with a comment for the uninformed
reader.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, when use_kmalloc_nolock is false, the freeing of fields for a
local storage selem is done eagerly before waiting for the RCU or RCU
tasks trace grace period to elapse. This opens up a window where the
program which has access to the selem can recreate the fields after the
freeing of fields is done eagerly, causing memory leaks when the element
is finally freed and returned to the kernel.
Make a few changes to address this. First, delay the freeing of fields
until after the grace periods have expired using a __bpf_selem_free_rcu
wrapper which is eventually invoked after transitioning through the
necessary number of grace period waits. Replace usage of the kfree_rcu
with call_rcu to be able to take a custom callback. Finally, care needs
to be taken to extend the rcu barriers for all cases, and not just when
use_kmalloc_nolock is true, as RCU and RCU tasks trace callbacks can be
in flight for either case and access the smap field, which is used to
obtain the BTF record to walk over special fields in the map value.
While we're at it, drop migrate_disable() from bpf_selem_free_rcu, since
migration should be disabled for RCU callbacks already.
Fixes: 9bac675e63 ("bpf: Postpone bpf_obj_free_fields to the rcu callback")
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF hash map may now use the map_check_btf() callback to decide whether
to set a dtor on its bpf_mem_alloc or not. Unlike C++ where members can
opt out of const-ness using mutable, we must lose the const qualifier on
the callback such that we can avoid the ugly cast. Make the change and
adjust all existing users, and lose the comment in hashtab.c.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a race window where BPF hash map elements can leak special
fields if the program with access to the map value recreates these
special fields between the check_and_free_fields done on the map value
and its eventual return to the memory allocator.
Several ways were explored prior to this patch, most notably [0] tried
to use a poison value to reject attempts to recreate special fields for
map values that have been logically deleted but still accessible to BPF
programs (either while sitting in the free list or when reused). While
this approach works well for task work, timers, wq, etc., it is harder
to apply the idea to kptrs, which have a similar race and failure mode.
Instead, we change bpf_mem_alloc to allow registering destructor for
allocated elements, such that when they are returned to the allocator,
any special fields created while they were accessible to programs in the
mean time will be freed. If these values get reused, we do not free the
fields again before handing the element back. The special fields thus
may remain initialized while the map value sits in a free list.
When bpf_mem_alloc is retired in the future, a similar concept can be
introduced to kmalloc_nolock-backed kmem_cache, paired with the existing
idea of a constructor.
Note that the destructor registration happens in map_check_btf, after
the BTF record is populated and (at that point) avaiable for inspection
and duplication. Duplication is necessary since the freeing of embedded
bpf_mem_alloc can be decoupled from actual map lifetime due to logic
introduced to reduce the cost of rcu_barrier()s in mem alloc free path in
9f2c6e96c6 ("bpf: Optimize rcu_barrier usage between hash map and bpf_mem_alloc.").
As such, once all callbacks are done, we must also free the duplicated
record. To remove dependency on the bpf_map itself, also stash the key
size of the map to obtain value from htab_elem long after the map is
gone.
[0]: https://lore.kernel.org/bpf/20260216131341.1285427-1-mykyta.yatsenko5@gmail.com
Fixes: 14a324f6a6 ("bpf: Wire up freeing of referenced kptr")
Fixes: 1bfbc267ec ("bpf: Enable bpf_timer and bpf_wq in any context")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260227224806.646888-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts.
Link: https://patch.msgid.link/20260226-work-visibility-fixes-v1-3-d2c2853313bd@kernel.org
Fixes: 76b6f5dfb3 ("nstree: add listns()")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@kernel.org # v6.19+
Signed-off-by: Christian Brauner <brauner@kernel.org>
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts.
Link: https://patch.msgid.link/20260226-work-visibility-fixes-v1-1-d2c2853313bd@kernel.org
Fixes: a1d220d9da ("nsfs: iterate through mount namespaces")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@kernel.org # v6.12+
Signed-off-by: Christian Brauner <brauner@kernel.org>
All are singletons - please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaaDF4AAKCRDdBJ7gKXxA
jhv5AQDv+B9rPkFJ0dlSS/hXqsDGqy3dGj/grJM0dw7LhkPHzgEAi/bV6D1jx0k3
k0hcP3JUxE54+a7liLadPDLIObOMLgo=
=R1ap
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2026-02-26-14-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes. 7 are cc:stable. 8 are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-02-26-14-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: update Yosry Ahmed's email address
mailmap: add entry for Daniele Alessandrelli
mm: fix NULL NODE_DATA dereference for memoryless nodes on boot
mm/tracing: rss_stat: ensure curr is false from kthread context
mm/kfence: fix KASAN hardware tag faults during late enablement
mm/damon/core: disallow non-power of two min_region_sz
Squashfs: check metadata block offset is within range
MAINTAINERS, mailmap: update e-mail address for Vlastimil Babka
liveupdate: luo_file: remember retrieve() status
mm: thp: deny THP for files on anonymous inodes
mm: change vma_alloc_folio_noprof() macro to inline function
mm/kfence: disable KFENCE upon KASAN HW tags enablement
A set of two fixes for DMA-mapping subsystem for the recently merged API
rework (Jiri Pirko and Stian Halseth).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaaDJnAAKCRCJp1EFxbsS
RBBTAP0WhFXOPeheDasVySviHbXxEdP2uc9/XgbnW40/HwWGRQD+KLkYSJDgGegv
v+fbLYNkZPgtOKAztp70imOOBM0fGQY=
=Q/dC
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-7.0-2026-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two DMA-mapping fixes for the recently merged API rework (Jiri Pirko
and Stian Halseth)"
* tag 'dma-mapping-7.0-2026-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
sparc: Fix page alignment in dma mapping
dma-mapping: avoid random addr value print out on error path
SCX_EFLAG_INITIALIZED is the sole member of enum scx_exit_flags with no
explicit value, so the compiler assigns it 0. This makes the bitwise OR
in scx_ops_init() a no-op:
sch->exit_info->flags |= SCX_EFLAG_INITIALIZED; /* |= 0 */
As a result, BPF schedulers cannot distinguish whether ops.init()
completed successfully by inspecting exit_info->flags.
Assign the value 1LLU << 0 so the flag is actually set.
Fixes: f3aec2adce ("sched_ext: Add SCX_EFLAG_INITIALIZED to indicate successful ops.init()")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path.
Reported-by: syzbot+10cc7f13760b31bd2e61@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698c4ce3.050a0220.340abe.000b.GAE@google.com/T/
Fixes: aeea1b86f9 ("bpf, devmap: Exclude XDP broadcast to master device")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Link: https://lore.kernel.org/r/20260225053506.4738-1-kohei@enjuk.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix pointer-to-array allocation types for ubd and kcsan
- Force size overflow helpers to __always_inline
- Bump __builtin_counted_by_ref to Clang 22.1 from 22.0 (Nathan Chancellor)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaaCJawAKCRA2KwveOeQk
u2LdAQD/wZYe1YCCrUR+jM6EvAoI2CzUEQUQMyzLtjIyeSR6VAD8CSdZu0htnwwy
Ca76IzSF8Aj0D7Hytxkk8HDAD4WuxA0=
=QucI
-----END PGP SIGNATURE-----
Merge tag 'kmalloc_obj-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj fixes from Kees Cook:
- Fix pointer-to-array allocation types for ubd and kcsan
- Force size overflow helpers to __always_inline
- Bump __builtin_counted_by_ref to Clang 22.1 from 22.0 (Nathan Chancellor)
* tag 'kmalloc_obj-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kcsan: test: Adjust "expect" allocation type for kmalloc_obj
overflow: Make sure size helpers are always inlined
init/Kconfig: Adjust fixed clang version for __builtin_counted_by_ref
ubd: Use pointer-to-pointers for io_thread_req arrays
