mirror of
https://github.com/torvalds/linux.git
synced 2026-03-08 03:24:45 +01:00
50991 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
99dfe2d4da |
block-7.0-20260216
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmmTrNEQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpjsOEACpUk78nFmLbEgJ5UH8+Z6daDzgoasb5YRT Mj4g+cM2J9Xc9JxgX8QR3F2EfolweTo/H6xlhnlPDcnpB+b3qj4WHuijR/wghphj MBKKqNXTEC+j0ra9uk8h3RmIKaK79xcUup7XfTcuWdYpSsMyYE/m/rck3thw6yNL OAjmWLTP4IwYzXip2AB+J7JbDDOV/qWK0aOYdWHCdbn9X8bBel/HDOITWPdybnSR DNKBeoi/Yv8KwA+axogqP213ifc3Xr6ejRDkqDOf1bgXsKkELkIxcfog6MhfHhxq 3Cqlj1pBuIBxGVU7wmBTDqL+aHrVb983tcA5x1NGZIzJao64b026o5DUhNPprwrZ HveU1MZ2jarAjAz85gE3S4oUY+6d47ooytfvO548Zp/1LY+fOxnjYqq5ksh8BBLk WyjfkJScgr17Z4SVOK8a9GboWO2WKiQJRg+hZ/TWX5fyvu5g9sbRasdwxnp1sl52 EayzkhYFq/Rdd8slwTIaccVUPl/xeEDeRG+jTJ+4Fj54TihKiJzXVsxDkSWKf46V CWmzDx+n6MlGPm9mShSERZ7HJh3VcSp4No/HAjf93u9/UXwubK/SKiV71nhpgJMf 9bWS2G3wPx/5LoME95YkF+CSgs0e/ROUusfGd8X6nIz9EBGzeabCG/mjqd5adC09 OZahOuqrIg== =PVoY -----END PGP SIGNATURE----- Merge tag 'block-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux Pull more block updates from Jens Axboe: - Fix partial IOVA mapping cleanup in error handling - Minor prep series ignoring discard return value, as the inline value is always known - Ensure BLK_FEAT_STABLE_WRITES is set for drbd - Fix leak of folio in bio_iov_iter_bounce_read() - Allow IOC_PR_READ_* for read-only open - Another debugfs deadlock fix - A few doc updates * tag 'block-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: blk-mq: use NOIO context to prevent deadlock during debugfs creation blk-stat: convert struct blk_stat_callback to kernel-doc block: fix enum descriptions kernel-doc block: update docs for bio and bvec_iter block: change return type to void nvmet: ignore discard return value md: ignore discard return value block: fix partial IOVA mapping cleanup in blk_rq_dma_map_iova block: fix folio leak in bio_iov_iter_bounce_read() block: allow IOC_PR_READ_* ioctls with BLK_OPEN_READ drbd: always set BLK_FEAT_STABLE_WRITES |
||
|
Linus Torvalds
|
543b9b6339 |
kernel-7.0-rc1.misc
Please consider pulling these changes from the signed kernel-7.0-rc1.misc tag. Thanks! Christian -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaZL+JwAKCRCRxhvAZXjc ovU/AP4xgVxEegnNYrXZ+TpdCXbCtQZ54JqowFX73MBtaBHY1QD/YkDaIzl6K70v d9P2Fe8Y6wOnIHxcjE4MIdMansphjAM= =TN3q -----END PGP SIGNATURE----- Merge tag 'kernel-7.0-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull pidfs updates from Christian Brauner: - pid: introduce task_ppid_vnr() helper - pidfs: convert rb-tree to rhashtable Mateusz reported performance penalties during task creation because pidfs uses pidmap_lock to add elements into the rbtree. Switch to an rhashtable to have separate fine-grained locking and to decouple from pidmap_lock moving all heavy manipulations outside of it Also move inode allocation outside of pidmap_lock. With this there's nothing happening for pidfs under pidmap_lock - pid: reorder fields in pid_namespace to reduce false sharing - Revert "pid: make __task_pid_nr_ns(ns => NULL) safe for zombie callers" - ipc: Add SPDX license id to mqueue.c * tag 'kernel-7.0-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: pid: introduce task_ppid_vnr() helper pidfs: implement ino allocation without the pidmap lock Revert "pid: make __task_pid_nr_ns(ns => NULL) safe for zombie callers" pid: reorder fields in pid_namespace to reduce false sharing pidfs: convert rb-tree to rhashtable ipc: Add SPDX license id to mqueue.c |
||
Yu Kuai
|
dfe48ea179 |
blk-mq: use NOIO context to prevent deadlock during debugfs creation
Creating debugfs entries can trigger fs reclaim, which can enter back into the block layer request_queue. This can cause deadlock if the queue is frozen. Previously, a WARN_ON_ONCE check was used in debugfs_create_files() to detect this condition, but it was racy since the queue can be frozen from another context at any time. Introduce blk_debugfs_lock()/blk_debugfs_unlock() helpers that combine the debugfs_mutex with memalloc_noio_save()/restore() to prevent fs reclaim from triggering block I/O. Also add blk_debugfs_lock_nomemsave() and blk_debugfs_unlock_nomemrestore() variants for callers that don't need NOIO protection (e.g., debugfs removal or read-only operations). Replace all raw debugfs_mutex lock/unlock pairs with these helpers, using the _nomemsave/_nomemrestore variants where appropriate. Reported-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/all/CAHj4cs9gNKEYAPagD9JADfO5UH+OiCr4P7OO2wjpfOYeM-RV=A@mail.gmail.com/ Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Closes: https://lore.kernel.org/all/aYWQR7CtYdk3K39g@shinmob/ Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Yu Kuai <yukuai@fnnas.com> Reviewed-by: Nilay Shroff <nilay@linux.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Linus Torvalds
|
2d10a48871 |
Probes for v7.0
- kprobes: Use a dedicated kernel thread to optimize the kprobes instead of using workqueue thread. Since the kprobe optimizer waits a long time for synchronize_rcu_task(), it can block other workers in the same queue if it uses a workqueue. - kprobe-events: Returns immediately if no new probe events are specified on the kernel command line at boot time. This shorten the kernel boot time. - kprobes: When a kprobe is fully removed from the kernel code, retry optimizing another kprobe which is blocked by that kprobe. -----BEGIN PGP SIGNATURE----- iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmmPtX4bHG1hc2FtaS5o aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bgoUH/0oZ9/c+wkn9AKxFlOAw AIbtTfKiQHXPirhamYuEbJJWTUH2O/Wr0SQrIkbwJzToou5CRTuT5UQBpmOk2GKZ uZ5bO63nOMn/1ECbDpc+lFGV5J4Dn5Pw2GFjUTR6EPwms+CN/d6f2LlvuAVfJX7Y klL2X9/QLwV5QT8La5zNEka2zBfrZlZ9a5DGoLtgdwX2zosuef9aDnisS2jkLenH wugZLryx0Qvlj9DXimP7oVZpYDHr0hZEI3CNQPge0gMQDj1XajGawYfkhrfaeFMX 4eXjFCN+NQG6fBUpDugcOThOypWmjlJhoYxxROJu0eFcLQjsuWjp6jLixI9Nr7P+ tQk= =syAj -----END PGP SIGNATURE----- Merge tag 'probes-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull kprobes updates from Masami Hiramatsu: - Use a dedicated kernel thread to optimize the kprobes instead of using workqueue thread. Since the kprobe optimizer waits a long time for synchronize_rcu_task(), it can block other workers in the same queue if it uses a workqueue. - kprobe-events: return immediately if no new probe events are specified on the kernel command line at boot time. This shortens the kernel boot time. - When a kprobe is fully removed from the kernel code, retry optimizing another kprobe which is blocked by that kprobe. * tag 'probes-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: kprobes: Use dedicated kthread for kprobe optimizer tracing: kprobe-event: Return directly when trace kprobes is empty kprobes: retry blocked optprobe in do_free_cleaned_kprobes |
||
Sebastian Andrzej Siewior
|
8e9bf8b9e8 |
printk, vt, fbcon: Remove console_conditional_schedule()
do_con_write(), fbcon_redraw.*() invoke console_conditional_schedule() which is a conditional scheduling point based on printk's internal variables console_may_schedule. It may only be used if the console lock is acquired for instance via console_lock() or console_trylock(). Prinkt sets the internal variable to 1 (and allows to schedule) if the console lock has been acquired via console_lock(). The trylock does not allow it. The console_conditional_schedule() invocation in do_con_write() is invoked shortly before console_unlock(). The console_conditional_schedule() invocation in fbcon_redraw.*() original from fbcon_scroll() / vt's con_scroll() which originate from a line feed. In console_unlock() the variable is set to 0 (forbids to schedule) and it tries to schedule while making progress printing. This is brand new compared to when console_conditional_schedule() was added in v2.4.9.11. In v2.6.38-rc3, console_unlock() (started its existence) iterated over all consoles and flushed them with disabled interrupts. A scheduling attempt here was not possible, it relied that a long print scheduled before console_unlock(). Since commit |
||
|
Linus Torvalds
|
3c6e577d5a |
tracing updates for 7.0:
User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To differentiate
that code from the C code, add entries in for the RUST version (with "[RUST]"
around it) so that the right maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active filters
enabled in the trace instance, the file show_event_filters will list them
so that there's only one file that needs to be examined to see if any
filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active triggers
enabled in the trace instance, the file show_event_triggers will list them
so that there's only one file that needs to be examined to see if any
triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace instances
instead of the top level instance. But if traceoff_on_warning triggers, it
doesn't stop the buffer with trace_printk() and that data can easily be
lost by being overwritten. Have traceoff_on_warning also disable the
instance that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file exists for
every event. This displays the internal data of any histogram enabled for
that event. But it is lacking the function that is called to process one
of its fields. This is very useful information that was missing when
debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently the size
of the stack that is stored is limited to just 16 entries. But the storage
space in the histogram is 256 bytes, meaning that it can store up to 31
entries (plus one for the count of entries). Instead of letting that space
go to waste, up the limit from 16 to 31. This makes the keys much more
useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only in a
previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring buffer
if it contains data from a previous boot. It is cleared when recording
starts again, but it is not cleared when the buffer is reset. The data is
useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some updates to
the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because it
expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run completely on
the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event happens,
an irq work is triggered to wake up that waiter. This is noisy on isolated
CPUs (running NO_HZ_FULL). Trigger an IPI to a house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into their
numbers in the trace event format files. This work queue can also be used
for other aspects of tracing that takes some time and shouldn't be called
by the init call code.
The blk_trace initialization takes a bit of time. Have the initialization
code moved to the new tracing generic work queue function.
- Skip kprobe boot event creation call if there's no kprobes defined on cmdline
The kprobe initialization to set up kprobes if they are defined on the
cmdline requires taking the event_mutex lock. This can be held by other
tracing code doing initialization for a long time. Since kprobes added to
the kernel command line need to be setup immediately, as they may be
tracing early initialization code, they cannot be postponed in a work
queue and must be setup in the initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to take the
mutex and slow down the boot up code waiting to get the lock only to find
out there's nothing to do. Simply exit out early if there's no kprobes on
the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about tracing
over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more difficult to
maintain. Start splitting it up so that related code is in their own
files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of the main
buffer and gets swapped with it when a new high latency is detected. This
keeps the trace up to the highest latency around where this max_latency
buffer is never written to. It is only used to save the last max latency
trace.
A while ago a snapshot feature was added to tracefs to allow user space to
perform the same logic. It could also enable events to trigger a
"snapshot" if one of their fields hit a new high. This was built on top of
the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency tracers
to be enabled. In reality, the latency tracers depend on the snapshot code
and not the other way around. It was just that they came first.
Restructure the code and the kconfigs to have the latency tracers depend
on snapshot code instead. This actually simplifies the logic a bit and
allows to disable more when the latency tracers are not defined and the
snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable that could
be changed by user space for each sample. If the user change this
variable, it could cause a bus contention, and reading that variable can
show up as a large latency in the trace causing a false positive. Read
this variable at the start of the sample with a READ_ONCE() into a local
variable and keep the code from sharing cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses a
static branch to call that tracer directly. When another tracer is added,
it goes into loop logic to call all the registered callbacks.
The code was incorrect when going back to one tracer and never re-enabled
the static branch again to do the optimization code.
- And other small fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaY9P3BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qou3AQCCrzdrIglLNABGPyny9sqWLDz6vyyw
nWAK9xg1VFxwRQD+LyJvVMWbpGeRBS/PsAK19RgldbgkQFWNv8gNhRKRgw0=
=U/kg
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To
differentiate that code from the C code, add entries in for the
RUST version (with "[RUST]" around it) so that the right
maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active
filters enabled in the trace instance, the file show_event_filters
will list them so that there's only one file that needs to be
examined to see if any filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active
triggers enabled in the trace instance, the file
show_event_triggers will list them so that there's only one file
that needs to be examined to see if any triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace
instances instead of the top level instance. But if
traceoff_on_warning triggers, it doesn't stop the buffer with
trace_printk() and that data can easily be lost by being
overwritten. Have traceoff_on_warning also disable the instance
that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file
exists for every event. This displays the internal data of any
histogram enabled for that event. But it is lacking the function
that is called to process one of its fields. This is very useful
information that was missing when debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently
the size of the stack that is stored is limited to just 16 entries.
But the storage space in the histogram is 256 bytes, meaning that
it can store up to 31 entries (plus one for the count of entries).
Instead of letting that space go to waste, up the limit from 16 to
31. This makes the keys much more useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only
in a previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring
buffer if it contains data from a previous boot. It is cleared when
recording starts again, but it is not cleared when the buffer is
reset. The data is useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some
updates to the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because
it expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run
completely on the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event
happens, an irq work is triggered to wake up that waiter. This is
noisy on isolated CPUs (running NO_HZ_FULL). Trigger an IPI to a
house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after
it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into
their numbers in the trace event format files. This work queue can
also be used for other aspects of tracing that takes some time and
shouldn't be called by the init call code.
The blk_trace initialization takes a bit of time. Have the
initialization code moved to the new tracing generic work queue
function.
- Skip kprobe boot event creation call if there's no kprobes defined
on cmdline
The kprobe initialization to set up kprobes if they are defined on
the cmdline requires taking the event_mutex lock. This can be held
by other tracing code doing initialization for a long time. Since
kprobes added to the kernel command line need to be setup
immediately, as they may be tracing early initialization code, they
cannot be postponed in a work queue and must be setup in the
initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to
take the mutex and slow down the boot up code waiting to get the
lock only to find out there's nothing to do. Simply exit out early
if there's no kprobes on the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about
tracing over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more
difficult to maintain. Start splitting it up so that related code
is in their own files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of
the main buffer and gets swapped with it when a new high latency is
detected. This keeps the trace up to the highest latency around
where this max_latency buffer is never written to. It is only used
to save the last max latency trace.
A while ago a snapshot feature was added to tracefs to allow user
space to perform the same logic. It could also enable events to
trigger a "snapshot" if one of their fields hit a new high. This
was built on top of the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency
tracers to be enabled. In reality, the latency tracers depend on
the snapshot code and not the other way around. It was just that
they came first.
Restructure the code and the kconfigs to have the latency tracers
depend on snapshot code instead. This actually simplifies the logic
a bit and allows to disable more when the latency tracers are not
defined and the snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable
that could be changed by user space for each sample. If the user
change this variable, it could cause a bus contention, and reading
that variable can show up as a large latency in the trace causing a
false positive. Read this variable at the start of the sample with
a READ_ONCE() into a local variable and keep the code from sharing
cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses
a static branch to call that tracer directly. When another tracer
is added, it goes into loop logic to call all the registered
callbacks.
The code was incorrect when going back to one tracer and never
re-enabled the static branch again to do the optimization code.
- And other small fixes and cleanups"
* tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (46 commits)
function_graph: Restore direct mode when callbacks drop to one
tracing: Fix indentation of return statement in print_trace_fmt()
tracing: Reset last_boot_info if ring buffer is reset
tracing: Fix to set write permission to per-cpu buffer_size_kb
tracing: Fix false sharing in hwlat get_sample()
tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection
tracing: Better separate SNAPSHOT and MAX_TRACE options
tracing: Add tracer_uses_snapshot() helper to remove #ifdefs
tracing: Rename trace_array field max_buffer to snapshot_buffer
tracing: Move pid filtering into trace_pid.c
tracing: Move trace_printk functions out of trace.c and into trace_printk.c
tracing: Use system_state in trace_printk_init_buffers()
tracing: Have trace_printk functions use flags instead of using global_trace
tracing: Make tracing_update_buffers() take NULL for global_trace
tracing: Make printk_trace global for tracing system
tracing: Move ftrace_trace_stack() out of trace.c and into trace.h
tracing: Move __trace_buffer_{un}lock_*() functions to trace.h
tracing: Make tracing_selftest_running global to the tracing subsystem
tracing: Make tracing_disabled global for tracing system
tracing: Clean up use of trace_create_maxlat_file()
...
|
||
|
Linus Torvalds
|
72f05009d8 |
dma-mapping update for Linux 7.0
A small code cleanup for DMA-mapping subsystem: - removal of unused hooks (Robin Murphy) -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaY80tQAKCRCJp1EFxbsS RHQUAP9yrD7PczbUfOCcYoxvmyqYZ76gQLwnx9GB4Gi0pctxGAEA1hxsu+LisN5x uMc3XW/zluzQj/gn+jWCD5v5DzdEWA4= =uf46 -----END PGP SIGNATURE----- Merge tag 'dma-mapping-7.0-2026-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux Pull dma-mapping update from Marek Szyprowski: "A small code cleanup for the DMA-mapping subsystem: removal of unused hooks (Robin Murphy)" * tag 'dma-mapping-7.0-2026-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: dma-mapping: Remove dma_mark_clean (again) |
||
Anton Protopopov
|
b0b1a8583d |
bpf: Add a map/btf from a fd array more consistently
The add_fd_from_fd_array() function takes a file descriptor as a
parameter and tries to add either map or btf to the corresponding
list of used objects. As was reported by Dan Carpenter, since the
commit c81e4322acf0 ("bpf: Fix a potential use-after-free of BTF
object"), the fdget() is called twice on the file descriptor, and
thus userspace, potentially, can replace the file pointed to by the
file descriptor in between the two calls. On practice, this shouldn't
break anything on the kernel side, but for consistency fix the code
such that only one fdget() is executed.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/aY689z7gHNv8rgVO@stanley.mountain/
Fixes:
|
||
|
Anton Protopopov
|
ccd2d799ed |
bpf: Fix a potential use-after-free of BTF object
Refcounting in the check_pseudo_btf_id() function is incorrect:
the __check_pseudo_btf_id() function might get called with a zero
refcounted btf. Fix this, and patch related code accordingly.
v3: rephrase a comment (AI)
v2: fix a refcount leak introduced in v1 (AI)
Reported-by: syzbot+5a0f1995634f7c1dadbf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5a0f1995634f7c1dadbf
Fixes:
|
||
|
Linus Torvalds
|
a353e7260b |
virtio,vhost,vdpa: features, fixes
- in order support in virtio core - multiple address space support in vduse - fixes, cleanups all over the place, notably - dma alignment fixes for non cache coherent systems Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmmO9rYPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpBzYH/2wUPo3T8/CKGFjF7QSPzgL/UI2NhnP8iSm4 btg1zVnrWmJK6vVIwnf5UsG8dFKsMcp/BEGCewTmIddNM2wEeSul0kKDXtIzrK/U jdA9bJrUKLMeU7IFKne1Fip/yE+5nkWJttWXXyVRJtOJrYxZlkWfqSns3qYcPvsG g7HXvF6tmici5uoKdRCLqHtQCWsvpnvTD5A7qoZAlEUjlQCDKKmuukpN9oK5UYLl 9uUOgPQAJaxIwx1C4uP7L+AwbLUcN/+MtrvQRNz+sFpP3sN9oXeDJKBpNQp109NB JGk1sUsINL+54Cmdd5RwZ9T1vBJyRDrdWRDy1yHj95LildaPfh0= =pnob -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - in-order support in virtio core - multiple address space support in vduse - fixes, cleanups all over the place, notably dma alignment fixes for non-cache-coherent systems * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits) vduse: avoid adding implicit padding vhost: fix caching attributes of MMIO regions by setting them explicitly vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr() vdpa/mlx5: reuse common function for MAC address updates vdpa/mlx5: update mlx_features with driver state check crypto: virtio: Replace package id with numa node id crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req crypto: virtio: Add spinlock protection with virtqueue notification Documentation: Add documentation for VDUSE Address Space IDs vduse: bump version number vduse: add vq group asid support vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls vduse: take out allocations from vduse_dev_alloc_coherent vduse: remove unused vaddr parameter of vduse_domain_free_coherent vduse: refactor vdpa_dev_add for goto err handling vhost: forbid change vq groups ASID if DRIVER_OK is set vdpa: document set_group_asid thread safety vduse: return internal vq group struct as map token vduse: add vq group support vduse: add v1 API definition ... |
||
Shengming Hu
|
53b2fae90f |
function_graph: Restore direct mode when callbacks drop to one
When registering a second fgraph callback, direct path is disabled and
array loop is used instead. When ftrace_graph_active falls back to one,
we try to re-enable direct mode via ftrace_graph_enable_direct(true, ...).
But ftrace_graph_enable_direct() incorrectly disables the static key
rather than enabling it. This leaves fgraph_do_direct permanently off
after first multi-callback transition, so direct fast mode is never
restored.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260213142932519cuWSpEXeS4-UnCvNXnK2P@zte.com.cn
Fixes:
|
||
|
Linus Torvalds
|
cee73b1e84 |
RISC-V updates for v7.0
- Add support for control flow integrity for userspace processes. This is based on the standard RISC-V ISA extensions Zicfiss and Zicfilp - Improve ptrace behavior regarding vector registers, and add some selftests - Optimize our strlen() assembly - Enable the ISO-8859-1 code page as built-in, similar to ARM64, for EFI volume mounting - Clean up some code slightly, including defining copy_user_page() as copy_page() rather than memcpy(), aligning us with other architectures; and using max3() to slightly simplify an expression in riscv_iommu_init_check() -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAmmOYpYACgkQx4+xDQu9 KkvzOQ/9Fq8ZxWgYofhTPtw9/vps3avheOHlEoRrBWYfn1VkTRPAcbUULL4PGXwg dnVFEl3AcrpOFikIthbukklLeLoOnUshZJBU25zY5h0My1jb63V1//gEwJR6I0dg +V+GJmfzc4+YVaHK6UFdn7j3GgKUbTC7xXRMuGEriAzKPnm3AXAjh94wMNx6depv Li3IXRoZT/HvqIAyfeAoM9STwOzJtE3Sc6fXABkzsIbNTjjdgIqoRSsQsKY10178 z6ox/sVStnLmVaMbOd/ZVN0J70JRDsvK0TC0/13K1ESUbnVia9a3bPIxLRmSapKC wXnwAuSeevtFshGGyd5LZO0QQGxzG1H63Gky2GRoh8bTQbd2tQcfQzANdnPkBAQS j2aOiSsiUQeNZqfZAfEBwRd27GXRYlKb/MpgCZKUH+ZO9VG6QaD3VGvg17/Caghy nVdbBQ81ZV9tkz9EMN0vt2VJHmEqARh88w619laHjg+ioPTG4/UIDPzskt1I+Fgm Y6NQLeFyfaO3RKKDYWGPcY7fmWQI9V8MECHOvyVI4xJcgqAbqnfsgytjuiFbrfRo fTvpuB7kvltBZ180QSB79xj0sWGFTWR02MeWy3uOaLZz2eIm2ZTZbMUSgNYR0ldG L3y7CEkTkoVF1ijYgAfuMgptk3Yf0dpa66D9HUo947wWkNrW5ds= =4fTk -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Paul Walmsley: - Add support for control flow integrity for userspace processes. This is based on the standard RISC-V ISA extensions Zicfiss and Zicfilp - Improve ptrace behavior regarding vector registers, and add some selftests - Optimize our strlen() assembly - Enable the ISO-8859-1 code page as built-in, similar to ARM64, for EFI volume mounting - Clean up some code slightly, including defining copy_user_page() as copy_page() rather than memcpy(), aligning us with other architectures; and using max3() to slightly simplify an expression in riscv_iommu_init_check() * tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits) riscv: lib: optimize strlen loop efficiency selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function selftests: riscv: verify ptrace accepts valid vector csr values selftests: riscv: verify ptrace rejects invalid vector csr inputs selftests: riscv: verify syscalls discard vector context selftests: riscv: verify initial vector state with ptrace selftests: riscv: test ptrace vector interface riscv: ptrace: validate input vector csr registers riscv: csr: define vtype register elements riscv: vector: init vector context with proper vlenb riscv: ptrace: return ENODATA for inactive vector extension kselftest/riscv: add kselftest for user mode CFI riscv: add documentation for shadow stack riscv: add documentation for landing pad / indirect branch tracking riscv: create a Kconfig fragment for shadow stack and landing pad support arch/riscv: add dual vdso creation logic and select vdso based on hw arch/riscv: compile vdso with landing pad and shadow stack note riscv: enable kernel access to shadow stack memory via the FWFT SBI call riscv: add kernel command line option to opt out of user CFI riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe ... |
||
|
Linus Torvalds
|
e812928be2 |
cxl changes for v7.0
- A set of commits that introduces cxl_memdev_attach and pave way for soft reserved handling, type2 accelerator enabling, and LSA 2.0 enabling. All these series require the endpoint driver to settle before continuing the memdev driver probe. dax/hmem, e820, resource: Defer Soft Reserved insertion until hmem is ready cxl/mem: Introduce cxl_memdev_attach for CXL-dependent operation cxl/mem: Drop @host argument to devm_cxl_add_memdev() cxl/mem: Convert devm_cxl_add_memdev() to scope-based-cleanup cxl/port: Arrange for always synchronous endpoint attach cxl/mem: Arrange for always-synchronous memdev attach cxl/mem: Fix devm_cxl_memdev_edac_release() confusion - A set to address CXL port error protocol handling and reporting. The large patch series was split into 3 parts. Part 1 and 2 are included here with part 3 coming later. Part 1 consists of a series of code refactoring to PCI AER sub-system that addresses CXL and also CXL RAS code to prepare for port error handling. Part 2 refactors the CXL code to move management of component registers to cxl_port objects to allow all CXL AER errors to be handled through the cxl_port hierarchy. Part 2: cxl/port: Move endpoint component register management to cxl_port cxl/port: Map Port RAS registers cxl/port: Move dport RAS setup to dport add time cxl/port: Move dport probe operations to a driver event cxl/port: Move decoder setup before dport creation cxl/port: Cleanup dport removal with a devres group cxl/port: Reduce number of @dport variables in cxl_port_add_dport() cxl/port: Cleanup handling of the nr_dports 0 -> 1 transition Part 1: cxl: Update RAS handler interfaces to also support CXL Ports cxl/mem: Clarify @host for devm_cxl_add_nvdimm() PCI/AER: Update struct aer_err_info with kernel-doc formatting PCI/AER: Report CXL or PCIe bus type in AER trace logging PCI/AER: Use guard() in cxl_rch_handle_error_iter() PCI/AER: Move CXL RCH error handling to aer_cxl_rch.c PCI/AER: Update is_internal_error() to be non-static is_aer_internal_error() PCI/AER: Export pci_aer_unmask_internal_errors() cxl/pci: Move CXL driver's RCH error handling into core/ras_rch.c PCI/AER: Replace PCIEAER_CXL symbol with CXL_RAS cxl/pci: Remove CXL VH handling in CONFIG_PCIEAER_CXL conditional blocks from core/pci.c PCI: Replace cxl_error_is_native() with pcie_aer_is_native() cxl/pci: Remove unnecessary CXL RCH handling helper functions cxl/pci: Remove unnecessary CXL Endpoint handling helper functions PCI: Introduce pcie_is_cxl() PCI: Update CXL DVSEC definitions PCI: Move CXL DVSEC definitions into uapi/linux/pci_regs.h - A set of patches to provide AMD Zen5 platform address translation for CXL using ACPI PRMT. Set includes a conventions document to explain why this is needed and how it's implemented. cxl: Disable HPA/SPA translation handlers for Normalized Addressing cxl/region: Factor out code into cxl_region_setup_poison() cxl/atl: Lock decoders that need address translation cxl: Enable AMD Zen5 address translation using ACPI PRMT cxl/acpi: Prepare use of EFI runtime services cxl: Introduce callback for HPA address ranges translation cxl/region: Use region data to get the root decoder cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos() cxl/region: Separate region parameter setup and region construction cxl: Simplify cxl_root_ops allocation and handling cxl/region: Store HPA range in struct cxl_region cxl/region: Store root decoder in struct cxl_region cxl/region: Rename misleading variable name @hpa to @hpa_range Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement cxl, doc: Moving conventions in separate files cxl, doc: Remove isonum.txt inclusion - A set of misc CXL patches of fixes, cleanups, and updates. Including CXL address translation for unaligned MOD3 regions. cxl: Fix premature commit_end increment on decoder commit failure cxl/region: Use do_div() for 64-bit modulo operation cxl/region: Translate HPA to DPA and memdev in unaligned regions cxl/region: Translate DPA->HPA in unaligned MOD3 regions cxl/core: Fix cxl_dport debugfs EINJ entries cxl/acpi: Remove cxl_acpi_set_cache_size() cxl/hdm: Fix newline character in dev_err() messages cxl/pci: Remove outdated FIXME comment and BUILD_BUG_ON Documentation/driver-api/cxl: device hotplug section Documentation/driver-api/cxl: BIOS/EFI expectation update -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5DAy15EJMCV1R6v9YGjFFmlTOEoFAmmOFXcACgkQYGjFFmlT OEojaxAApQJFLyX1MkPbhtm6j6GRzzEAEWTBX2XsmliZf1JhfahsNMWI69kO33rm LddF+nyZNEl/foyHgUaxVzlQwqWuihyp7Qk2djXnMzLsuCAsWhPbB9j0RgJUN8h5 N4U76AmOdmhLlXH4CCqoW2jNy0OjxNdgp1FtTHv7VO7RxgRE9MFJRkLulKxB03wy t6lRZXPofEFcHen40DlYRtW26vy1BYUO0dng2f16DxWrb1ztdACH/zVqCJJtdoFc FAT5EaQCeRYZ9Yz4dONw3DcUjYlG6NcRN9FWNiptBn1Pb7pUX55Le8lfD3qZg0an m3lWRs1T/lGz7pWmz4GPUKDwGFCEqLqd4oSz5v+dFR3JJxjJpRzKa19y5TfqK/LF diqNZsDD9gCXE1HXzNr1YcbllpU2cPRPf58gWG9bLmG5xUUmScib8LoTMfgcCJW5 SlC6kf7BFLkJfDTcFaILc/UANeZaLGhrV0vyJntfGyT5EqKOcfjQEvrZvofA8mef bdxt0IRDW4D+7kkcuR33OipTVUFG3ban8yYq4zXD64dmeHF76gwdJm3nyXsqdtpc IYIIhz0W6pbTKjJ2fy1rZcTac1ZaALstyaF4bYWIjyF3NylPM8tDi48DFr+DGgeX xkFs2B9p5vY5Cq73gCmSWsi3PBPTjWzeRp7YZrV6VoBd9uqewUs= =blFQ -----END PGP SIGNATURE----- Merge tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull CXL updates from Dave Jiang: - Introduce cxl_memdev_attach and pave way for soft reserved handling, type2 accelerator enabling, and LSA 2.0 enabling. All these series require the endpoint driver to settle before continuing the memdev driver probe. - Address CXL port error protocol handling and reporting. The large patch series was split into three parts. The first two parts are included here with the final part coming later. The first part consists of a series of code refactoring to PCI AER sub-system that addresses CXL and also CXL RAS code to prepare for port error handling. The second part refactors the CXL code to move management of component registers to cxl_port objects to allow all CXL AER errors to be handled through the cxl_port hierarchy. - Provide AMD Zen5 platform address translation for CXL using ACPI PRMT. This includes a conventions document to explain why this is needed and how it's implemented. - Misc CXL patches of fixes, cleanups, and updates. Including CXL address translation for unaligned MOD3 regions. [ TLA service: CXL is "Compute Express Link" ] * tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (59 commits) cxl: Disable HPA/SPA translation handlers for Normalized Addressing cxl/region: Factor out code into cxl_region_setup_poison() cxl/atl: Lock decoders that need address translation cxl: Enable AMD Zen5 address translation using ACPI PRMT cxl/acpi: Prepare use of EFI runtime services cxl: Introduce callback for HPA address ranges translation cxl/region: Use region data to get the root decoder cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos() cxl/region: Separate region parameter setup and region construction cxl: Simplify cxl_root_ops allocation and handling cxl/region: Store HPA range in struct cxl_region cxl/region: Store root decoder in struct cxl_region cxl/region: Rename misleading variable name @hpa to @hpa_range Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement cxl, doc: Moving conventions in separate files cxl, doc: Remove isonum.txt inclusion cxl/port: Unify endpoint and switch port lookup cxl/port: Move endpoint component register management to cxl_port cxl/port: Map Port RAS registers cxl/port: Move dport RAS setup to dport add time ... |
||
Ran Xiaokai
|
f7a553b813 |
kho: remove unnecessary WARN_ON(err) in kho_populate()
The following pr_warn() provides detailed error and location information, WARN_ON(err) adds no additional debugging value, so remove the redundant WARN_ON() call. Link: https://lkml.kernel.org/r/20260212111146.210086-3-ranxiaokai627@163.com Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Alexander Graf <graf@amazon.com> Cc: Mike Rapoport <rppt@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ran Xiaokai
|
34df6c4734 |
kho: fix missing early_memunmap() call in kho_populate()
Patch series "two fixes in kho_populate()", v3.
This patch (of 2):
kho_populate() returns without calling early_memunmap() on success path,
this will cause early ioremap virtual address space leak.
Link: https://lkml.kernel.org/r/20260212111146.210086-1-ranxiaokai627@163.com
Link: https://lkml.kernel.org/r/20260212111146.210086-2-ranxiaokai627@163.com
Fixes:
|
||
Lorenzo Stoakes
|
5bd2c0650a |
mm: update all remaining mmap_prepare users to use vma_flags_t
We will be shortly removing the vm_flags_t field from vm_area_desc so we need to update all mmap_prepare users to only use the dessc->vma_flags field. This patch achieves that and makes all ancillary changes required to make this possible. This lays the groundwork for future work to eliminate the use of vm_flags_t in vm_area_desc altogether and more broadly throughout the kernel. While we're here, we take the opportunity to replace VM_REMAP_FLAGS with VMA_REMAP_FLAGS, the vma_flags_t equivalent. No functional changes intended. Link: https://lkml.kernel.org/r/fb1f55323799f09fe6a36865b31550c9ec67c225.1769097829.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Damien Le Moal <dlemoal@kernel.org> [zonefs] Acked-by: "Darrick J. Wong" <djwong@kernel.org> Acked-by: Pedro Falcato <pfalcato@suse.de> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@kernel.org> Cc: Dev Jain <dev.jain@arm.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Yury Norov <ynorov@nvidia.com> Cc: Chris Mason <clm@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Bing Jiao
|
1aceed565f |
mm/vmscan: fix demotion targets checks in reclaim/demotion
Patch series "mm/vmscan: fix demotion targets checks in reclaim/demotion", v9. This patch series addresses two issues in demote_folio_list(), can_demote(), and next_demotion_node() in reclaim/demotion. 1. demote_folio_list() and can_demote() do not correctly check demotion target against cpuset.mems_effective, which will cause (a) pages to be demoted to not-allowed nodes and (b) pages fail demotion even if the system still has allowed demotion nodes. Patch 1 fixes this bug by updating cpuset_node_allowed() and mem_cgroup_node_allowed() to return effective_mems, allowing directly logic-and operation against demotion targets. 2. next_demotion_node() returns a preferred demotion target, but it does not check the node against allowed nodes. Patch 2 ensures that next_demotion_node() filters against the allowed node mask and selects the closest demotion target to the source node. This patch (of 2): Fix two bugs in demote_folio_list() and can_demote() due to incorrect demotion target checks against cpuset.mems_effective in reclaim/demotion. Commit |
||
|
Linus Torvalds
|
f75c03a761 |
runtime verifier changes for 7.0:
- Refactor da_monitor to minimise macros Complete refactor of da_monitor.h to reduce reliance on macros generating functions. Use generic static functions and uses the preprocessor only when strictly necessary (e.g. for tracepoint handlers). The change essentially relies on functions with generic names (e.g. da_handle) instead of monitor-specific as well adding the need to define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including the header rather than calling macros that would define functions. Also adapt monitors and documentation accordingly. - Cleanup DA code generation scripts Clean up functions in dot2c removing reimplementations of trivial library functions (__buff_to_string) and removing some other unused intermediate steps. - Annotate functions with types in the rvgen python scripts - Remove superfluous assignments and cleanup generated code The rvgen scripts generate a superfluous assignment to 0 for enum variables and don't add commas to the last elements, which is against the kernel coding standards. Change the generation process for a better compliance and slightly simpler logic. - Remove superfluous declarations from generated code The monitor container source files contained a declaration and a definition for the rv_monitor variable. The former is superfluous and was removed. - Fix reference to outdated documentation s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in da_monitor.h -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaY3j9xQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qup5AP0afGb2gr+SOIOu0dIAXjGLg3cbz0C4 J4bDx6H0cdgXywD+Maassm0nKIgDnOBLwtuwL0kEUAxllqn7RCZ2+ARwbAU= =dfCl -----END PGP SIGNATURE----- Merge tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull runtime verifier updates from Steven Rostedt: - Refactor da_monitor to minimize macros Complete refactor of da_monitor.h to reduce reliance on macros generating functions. Use generic static functions and uses the preprocessor only when strictly necessary (e.g. for tracepoint handlers). The change essentially relies on functions with generic names (e.g. da_handle) instead of monitor-specific as well adding the need to define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including the header rather than calling macros that would define functions. Also adapt monitors and documentation accordingly. - Cleanup DA code generation scripts Clean up functions in dot2c removing reimplementations of trivial library functions (__buff_to_string) and removing some other unused intermediate steps. - Annotate functions with types in the rvgen python scripts - Remove superfluous assignments and cleanup generated code The rvgen scripts generate a superfluous assignment to 0 for enum variables and don't add commas to the last elements, which is against the kernel coding standards. Change the generation process for a better compliance and slightly simpler logic. - Remove superfluous declarations from generated code The monitor container source files contained a declaration and a definition for the rv_monitor variable. The former is superfluous and was removed. - Fix reference to outdated documentation s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in da_monitor.h * tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: rv: Fix documentation reference in da_monitor.h verification/rvgen: Remove unused variable declaration from containers verification/dot2c: Remove superfluous enum assignment and add last comma verification/dot2c: Remove __buff_to_string() and cleanup verification/rvgen: Annotate DA functions with types verification/rvgen: Adapt dot2k and templates after refactoring da_monitor.h Documentation/rv: Adapt documentation after da_monitor refactoring rv: Cleanup da_monitor after refactor rv: Refactor da_monitor to minimise macros |
||
|
Linus Torvalds
|
136114e0ab |
mm.git review status for linus..mm-nonmm-stable
Total patches: 107 Reviews/patch: 1.07 Reviewed rate: 67% - The 2 patch series "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" from Heming Zhao saves disk space by teaching ocfs2 to reclaim suballocator block group space. - The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in various places. - The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size. - The 7 patch series "kallsyms: Prevent invalid access when showing module buildid" from Petr Mladek cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces. - The 3 patch series "Address page fault in ima_restore_measurement_list()" from Harshit Mogalapalli fixes a kexec-related crash that can occur when booting the second-stage kernel on x86. - The 6 patch series "kho: ABI headers and Documentation updates" from Mike Rapoport updates the kexec handover ABI documentation. - The 4 patch series "Align atomic storage" from Finn Thain adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh. - The 2 patch series "kho: clean up page initialization logic" from Pratyush Yadav simplifies the page initialization logic in kho_restore_page(). - The 6 patch series "Unload linux/kernel.h" from Yury Norov moves several things out of kernel.h and into more appropriate places. - The 7 patch series "don't abuse task_struct.group_leader" from Oleg Nesterov removes the usage of ->group_leader when it is "obviously unnecessary". - The 5 patch series "list private v2 & luo flb" from Pasha Tatashin adds some infrastructure improvements to the live update orchestrator. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6 0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww= =mmsH -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ... |
||
|
Linus Torvalds
|
4cff5c05e0 |
mm.git review status for linus..mm-stable
Everything:
Total patches: 325
Reviews/patch: 1.39
Reviewed rate: 72%
Excluding DAMON:
Total patches: 262
Reviews/patch: 1.63
Reviewed rate: 82%
Excluding DAMON and zram:
Total patches: 248
Reviews/patch: 1.72
Reviewed rate: 86%
- The 14 patch series "powerpc/64s: do not re-activate batched TLB
flush" from Alexander Gordeev makes arch_{enter|leave}_lazy_mmu_mode()
nest properly.
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- The 7 patch series "zram: introduce compressed data writeback" from
Richard Chang and Sergey Senozhatsky implements data compression for
zram writeback.
- The 8 patch series "mm: folio_zero_user: clear page ranges" from David
Hildenbrand adds clearing of contiguous page ranges for hugepages.
Large improvements during demand faulting are demonstrated.
- The 2 patch series "memcg cleanups" from Chen Ridong tideis up some
memcg code.
- The 12 patch series "mm/damon: introduce {,max_}nr_snapshots and
tracepoint for damos stats" from SeongJae Park improves DAMOS stat's
provided information, deterministic control, and readability.
- The 3 patch series "selftests/mm: hugetlb cgroup charging: robustness
fixes" from Li Wang fixes a few issues in the hugetlb cgroup charging
selftests.
- The 5 patch series "Fix va_high_addr_switch.sh test failure - again"
from Chunyu Hu addresses several issues in the va_high_addr_switch test.
- The 5 patch series "mm/damon/tests/core-kunit: extend existing test
scenarios" from Shu Anzai improves the KUnit test coverage for DAMON.
- The 2 patch series "mm/khugepaged: fix dirty page handling for
MADV_COLLAPSE" from Shivank Garg fixes a glitch in khugepaged which was
causing madvise(MADV_COLLAPSE) to transiently return -EAGAIN.
- The 29 patch series "arch, mm: consolidate hugetlb early reservation"
from Mike Rapoport reworks and consolidates a pile of straggly code
related to reservation of hugetlb memory from bootmem and creation of
CMA areas for hugetlb.
- The 9 patch series "mm: clean up anon_vma implementation" from Lorenzo
Stoakes cleans up the anon_vma implementation in various ways.
- The 3 patch series "tweaks for __alloc_pages_slowpath()" from
Vlastimil Babka does a little streamlining of the page allocator's
slowpath code.
- The 8 patch series "memcg: separate private and public ID namespaces"
from Shakeel Butt cleans up the memcg ID code and prevents the
internal-only private IDs from being exposed to userspace.
- The 6 patch series "mm: hugetlb: allocate frozen gigantic folio" from
Kefeng Wang cleans up the allocation of frozen folios and avoids some
atomic refcount operations.
- The 11 patch series "mm/damon: advance DAMOS-based LRU sorting" from
SeongJae Park improves DAMOS's movement of memory betewwn the active and
inactive LRUs and adds auto-tuning of the ratio-based quotas and of
monitoring intervals.
- The 18 patch series "Support page table check on PowerPC" from Andrew
Donnellan makes CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc.
- The 3 patch series "nodemask: align nodes_and{,not} with underlying
bitmap ops" from Yury Norov makes nodes_and() and nodes_andnot()
propagate the return values from the underlying bit operations, enabling
some cleanup in calling code.
- The 5 patch series "mm/damon: hide kdamond and kdamond_lock from API
callers" from SeongJae Park cleans up some DAMON internal interfaces.
- The 4 patch series "mm/khugepaged: cleanups and scan limit fix" from
Shivank Garg does some cleanup work in khupaged and fixes a scan limit
accounting issue.
- The 24 patch series "mm: balloon infrastructure cleanups" from David
Hildenbrand goes to town on the balloon infrastructure and its page
migration function. Mainly cleanups, also some locking simplification.
- The 2 patch series "mm/vmscan: add tracepoint and reason for
kswapd_failures reset" from Jiayuan Chen adds additional tracepoints to
the page reclaim code.
- The 3 patch series "Replace wq users and add WQ_PERCPU to
alloc_workqueue() users" from Marco Crivellari is part of Marco's
kernel-wide migration from the legacy workqueue APIs over to the
preferred unbound workqueues.
- The 9 patch series "Various mm kselftests improvements/fixes" from
Kevin Brodsky provides various unrelated improvements/fixes for the mm
kselftests.
- The 5 patch series "mm: accelerate gigantic folio allocation" from
Kefeng Wang greatly speeds up gigantic folio allocation, mainly by
avoiding unnecessary work in pfn_range_valid_contig().
- The 5 patch series "selftests/damon: improve leak detection and wss
estimation reliability" from SeongJae Park improves the reliability of
two of the DAMON selftests.
- The 8 patch series "mm/damon: cleanup kdamond, damon_call(), damos
filter and DAMON_MIN_REGION" from SeongJae Park does some cleanup work
in the core DAMON code.
- The 8 patch series "Docs/mm/damon: update intro, modules, maintainer
profile, and misc" from SeongJae Park performs maintenance work on the
DAMON documentation.
- The 10 patch series "mm: add and use vma_assert_stabilised() helper"
from Lorenzo Stoakes refactors and cleans up the core VMA code. The
main aim here is to be able to use the mmap write lock's lockdep state
to perform various assertions regarding the locking which the VMA code
requires.
- The 19 patch series "mm, swap: swap table phase II: unify swapin use"
from Kairui Song removes some old swap code (swap cache bypassing and
swap synchronization) which wasn't working very well. Various other
cleanups and simplifications were made. The end result is a 20% speedup
in one benchmark.
- The 8 patch series "enable PT_RECLAIM on more 64-bit architectures"
from Qi Zheng makes PT_RECLAIM available on 64-bit alpha, loongarch,
mips, parisc, um, Various cleanups were performed along the way.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY1HfAAKCRDdBJ7gKXxA
jqhZAP9H8ZlKKqCEgnr6U5XXmJ63Ep2FDQpl8p35yr9yVuU9+gEAgfyWiJ43l1fP
rT0yjsUW3KQFBi/SEA3R6aYarmoIBgI=
=+HLt
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
||
Qingye Zhao
|
5ee01f1a73 |
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here.
Fixes:
|
||
|
Linus Torvalds
|
37a93dd5c4 |
Networking changes for 7.0
Core & protocols
----------------
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls for
small helper and stack canary overhead in the fast-path. This
generates better and faster code with very small or no text size
increases, as in many cases the call generated more code than the
actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage by
up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the RX
path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without the
HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified, aligning
IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the rate
shaper of sch_cake across multiple CPUs, while still enforcing a
single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations that
are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information, saving
cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most protocols,
avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies between
the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes back
online.
Driver API
----------
- Support for switching the working mode (automatic vs manual) of a DPLL
device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties, to
generalize polarity inversion requirements for differential signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers
--------------
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram and
NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the used
H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO, leading to
12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN metadata
access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support
multi-wiphy devices and and pave the way for future device support
in the same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O31Y
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
||
Haoyang LIU
|
fa4820b893 |
tracing: Fix indentation of return statement in print_trace_fmt()
The return statement inside the nested if block in print_trace_fmt() is not properly indented, making the code structure unclear. This was flagged by smatch as a warning. Add proper indentation to the return statement to match the kernel coding style and improve readability. Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260210153903.8041-1-tttturtleruss@gmail.com Signed-off-by: Haoyang LIU <tttturtleruss@gmail.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
1c2b4a4c2b |
pci-v7.0-changes
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmmKJO4UHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vzotA/+OGSOPOs9hWd+OwNF5Dm2WA81yG/3
K3Jx5uMuPoSjduMbPhVcib02Mr6YDJTa6WlYNVa76ADs2G6HxcVMFHutlYudSVcl
umSF48FnyeH1LTba88dRoVj4DB47Cue+BfhYY2L0ZtxmjQq/NRuDFAaGBh54uNeF
Gcdgr52QlM01n1X6yKvl7vE9gPdcPH80L256ssHAm6oSOHI1SPc6gqEKUUD02f8G
FtzfTUAq/cWYjlY3VoS5GKtdHxFYuXqC5WfbURhJ11o/nVJY9k1Zx8n4eI1tmAtN
7q692xjWSQJZlzepOBBEyjFUpIiy80tZ43z2ptRRBeI/n/qMmGPAov/g4MzegBWG
IAEHTAp/xx1Wra1ynr7RNvYVcPpXm2TEim8gIGah9DkHbNgbu7ing+OO7DnQuyfD
2h4hGD2622o6uikqkwzVd4mYuIcFu7SA6yROZhFn83BRnz0QOQienDrDlvOB8XCV
EodLAOMc2KClvOmmriFMy11PH7MFFoXexV6KS83VfDJHi4+XzBsy0w6TXTohcA9s
JTPIkSWqf/u6SrdLjXlFGyyJ2/KCgRiXFIBhhtYBMhDuuO7nG+mcSVzMa1PT0s6C
PF+QoT7sJof/5VMJ4o3BgPrPkD3CQICrlt8XIt5I8ngsy6RZRQ5rt+pUix7Shcn8
DgcunuINYfQtkfw=
=LIjp
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
|
||
|
Linus Torvalds
|
db9571a661 |
printk changes for 7.0
-----BEGIN PGP SIGNATURE-----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=2Iob
-----END PGP SIGNATURE-----
Merge tag 'printk-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Check all mandatory callbacks when registering nbcon consoles
- Fix some compiler warnings
* tag 'printk-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsnprintf: drop __printf() attributes on binary printing functions
printf: convert test_hashed into macro
printk: nbcon: Check for device_{lock,unlock} callbacks
|
||
|
Linus Torvalds
|
41f1a08645 |
Kbuild/Kconfig updates for 7.0
Kbuild changes
==============
* Drop '*_probe' pattern from modpost section check allowlist, which hid
legitimate warnings (Johan Hovold)
* Disable -Wtype-limits altogether, instead of enabling at W=2 (Vincent
Mailhol)
* Improve UAPI testing to skip testing headers that require a libc when
CONFIG_CC_CAN_LINK is not set, opening up testing of headers with no
libc dependencies to more environments (Thomas Weißschuh)
* Update gendwarfksyms documentation with required dependencies (Jihan
LIN)
* Reject invalid LLVM= values to avoid unintentionally falling back to
system toolchain (Thomas Weißschuh)
* Add a script to help run the kernel build process in a container for
consistent environments and testing (Guillaume Tucker)
* Simplify kallsyms by getting rid of the relative base (Ard Biesheuvel)
* Performance and usability improvements to scripts/make_fit.py (Simon
Glass)
* Minor various clean ups and fixes
Kconfig changes
===============
* Move XPM icons to individual files, clearing up GTK deprecation
warnings (Rostislav Krasny)
* Support
depends on FOO if BAR
as syntactic sugar for
depends on FOO || !BAR' (Nicolas Pitre, Graham Roff)
* Refactor merge_config.sh to use awk over shell/sed/grep, dramatically
speeding up processing large number of config fragments (Anders
Roxell, Mikko Rapeli)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaYpgQwAKCRAdayaRccAa
liOGAQCqMI42YMLqljFcPu3B/3f43xhDBCXAhquPBIMhbgt+aAEAmmo3uMLHKSRV
XZDKkq13HMMV3Zlmrn5Xk/tzk+hkwwk=
=WYl4
-----END PGP SIGNATURE-----
Merge tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nathan Chancellor:
"Kbuild:
- Drop '*_probe' pattern from modpost section check allowlist, which
hid legitimate warnings (Johan Hovold)
- Disable -Wtype-limits altogether, instead of enabling at W=2
(Vincent Mailhol)
- Improve UAPI testing to skip testing headers that require a libc
when CONFIG_CC_CAN_LINK is not set, opening up testing of headers
with no libc dependencies to more environments (Thomas Weißschuh)
- Update gendwarfksyms documentation with required dependencies
(Jihan LIN)
- Reject invalid LLVM= values to avoid unintentionally falling back
to system toolchain (Thomas Weißschuh)
- Add a script to help run the kernel build process in a container
for consistent environments and testing (Guillaume Tucker)
- Simplify kallsyms by getting rid of the relative base (Ard
Biesheuvel)
- Performance and usability improvements to scripts/make_fit.py
(Simon Glass)
- Minor various clean ups and fixes
Kconfig:
- Move XPM icons to individual files, clearing up GTK deprecation
warnings (Rostislav Krasny)
- Support
depends on FOO if BAR
as syntactic sugar for
depends on FOO || !BAR
(Nicolas Pitre, Graham Roff)
- Refactor merge_config.sh to use awk over shell/sed/grep,
dramatically speeding up processing large number of config
fragments (Anders Roxell, Mikko Rapeli)"
* tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (39 commits)
kbuild: remove dependency of run-command on config
scripts/make_fit: Compress dtbs in parallel
scripts/make_fit: Support a few more parallel compressors
kbuild: Support a FIT_EXTRA_ARGS environment variable
scripts/make_fit: Move dtb processing into a function
scripts/make_fit: Support an initial ramdisk
scripts/make_fit: Speed up operation
rust: kconfig: Don't require RUST_IS_AVAILABLE for rustc-option
MAINTAINERS: Add scripts/install.sh into Kbuild entry
modpost: Amend ppc64 save/restfpr symnames for -Os build
MIPS: tools: relocs: Ship a definition of R_MIPS_PC32
streamline_config.pl: remove superfluous exclamation mark
kbuild: dummy-tools: Add python3
scripts: kconfig: merge_config.sh: warn on duplicate input files
scripts: kconfig: merge_config.sh: use awk in checks too
scripts: kconfig: merge_config.sh: refactor from shell/sed/grep to awk
kallsyms: Get rid of kallsyms relative base
mips: Add support for PC32 relocations in vmlinux
Documentation: dev-tools: add container.rst page
scripts: add tool to run containerized builds
...
|
||
|
Linus Torvalds
|
38ef046544 |
sched_ext: Changes for v6.20
- Move C example schedulers back from the external scx repo to tools/sched_ext as the authoritative source. scx_userland and scx_pair are returning while scx_sdt (BPF arena-based task data management) is new. These schedulers will be dropped from the external repo. - Improve error reporting by adding scx_bpf_error() calls when DSQ creation fails across all in-tree schedulers. - Avoid redundant irq_work_queue() calls in destroy_dsq() by only queueing when llist_add() indicates an empty list. - Fix flaky init_enable_count selftest by properly synchronizing pre-forked children using a pipe instead of sleep(). -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaYo1pQ4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGa5VAP9udiGksQ4bBFQrUD+0yhuvjsSuXzssfdfxHgT6 Hj66wgEAjgbnSyxfcGrB+w7DWUxNLaZlXepibVMPcfvAaSieSgU= =UvLY -----END PGP SIGNATURE----- Merge tag 'sched_ext-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext updates from Tejun Heo: - Move C example schedulers back from the external scx repo to tools/sched_ext as the authoritative source. scx_userland and scx_pair are returning while scx_sdt (BPF arena-based task data management) is new. These schedulers will be dropped from the external repo. - Improve error reporting by adding scx_bpf_error() calls when DSQ creation fails across all in-tree schedulers - Avoid redundant irq_work_queue() calls in destroy_dsq() by only queueing when llist_add() indicates an empty list - Fix flaky init_enable_count selftest by properly synchronizing pre-forked children using a pipe instead of sleep() * tag 'sched_ext-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: selftests/sched_ext: Fix init_enable_count flakiness tools/sched_ext: Fix data header access during free in scx_sdt tools/sched_ext: Add error logging for dsq creation failures in remaining schedulers tools/sched_ext: add arena based scheduler tools/sched_ext: add scx_pair scheduler tools/sched_ext: add scx_userland scheduler sched_ext: Add error logging for dsq creation failures sched_ext: Avoid multiple irq_work_queue() calls in destroy_dsq() |
||
|
Linus Torvalds
|
ff661eeee2 |
cgroup: Changes for v6.20
- cpuset changes:
- Continue separating v1 and v2 implementations by moving more
v1-specific logic into cpuset-v1.c.
- Improve partition handling. Sibling partitions are no longer
invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
fail in v2, and effective_xcpus computation is made consistent.
- Fix partition effective CPUs overlap that caused a warning on cpuset
removal when sibling partitions shared CPUs.
- Increase the maximum cgroup subsystem count from 16 to 32 to
accommodate future subsystem additions.
- Misc cleanups and selftest improvements including switching to
css_is_online() helper, removing dead code and stale documentation
references, using lockdep_assert_cpuset_lock_held() consistently,
and adding polling helpers for asynchronously updated cgroup
statistics.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaYozIw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGZQKAQD51KJQz4M79wf2yBhIBLOnM4aakMalhSwZNL4O
JiGutwD+Ir33VzNX8aXBuDin9p4wI15O54PhqSenJbelKRQ3Dws=
=gR7L
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes:
- Continue separating v1 and v2 implementations by moving more
v1-specific logic into cpuset-v1.c
- Improve partition handling. Sibling partitions are no longer
invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
fail in v2, and effective_xcpus computation is made consistent
- Fix partition effective CPUs overlap that caused a warning on
cpuset removal when sibling partitions shared CPUs
- Increase the maximum cgroup subsystem count from 16 to 32 to
accommodate future subsystem additions
- Misc cleanups and selftest improvements including switching to
css_is_online() helper, removing dead code and stale documentation
references, using lockdep_assert_cpuset_lock_held() consistently, and
adding polling helpers for asynchronously updated cgroup statistics
* tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: fix overlap of partition effective CPUs
cgroup: increase maximum subsystem count from 16 to 32
cgroup: Remove stale cpu.rt.max reference from documentation
cpuset: replace direct lockdep_assert_held() with lockdep_assert_cpuset_lock_held()
cgroup/cpuset: Move the v1 empty cpus/mems check to cpuset1_validate_change()
cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict
cgroup/cpuset: Don't fail cpuset.cpus change in v2
cgroup/cpuset: Consistently compute effective_xcpus in update_cpumasks_hier()
cgroup/cpuset: Streamline rm_siblings_excl_cpus()
cpuset: remove dead code in cpuset-v1.c
cpuset: remove v1-specific code from generate_sched_domains
cpuset: separate generate_sched_domains for v1 and v2
cpuset: move update_domain_attr_tree to cpuset_v1.c
cpuset: add cpuset1_init helper for v1 initialization
cpuset: add cpuset1_online_css helper for v1-specific operations
cpuset: add lockdep_assert_cpuset_lock_held helper
cpuset: Remove unnecessary checks in rebuild_sched_domains_locked
cgroup: switch to css_is_online() helper
selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants
selftests: cgroup: make test_memcg_sock robust against delayed sock stats
...
|
||
|
Linus Torvalds
|
9bdc64892d |
workqueue: Changes for v6.20
- Rework the rescuer to process work items one-by-one instead of slurping all pending work items in a single pass. As there is only one rescuer per workqueue, a single long-blocking work item could cause high latency for all tasks queued behind it, even after memory pressure is relieved and regular kworkers become available to service them. - Add CONFIG_BOOTPARAM_WQ_STALL_PANIC build-time option and workqueue.panic_on_stall_time parameter for time-based stall panic, giving systems more control over workqueue stall handling. - Replace BUG_ON() with panic() in the stall panic path for clearer intent and more informative output. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaYov/A4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGWXnAQCfyELl+evz3RdFhyTiVCM1TiOnC1TsBjgkm3SJ orMhwgEAkgg40jino34wgeZRfdIAThxQ1O6bsvTpooWKjlCYcQY= =zZCF -----END PGP SIGNATURE----- Merge tag 'wq-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue updates from Tejun Heo: - Rework the rescuer to process work items one-by-one instead of slurping all pending work items in a single pass. As there is only one rescuer per workqueue, a single long-blocking work item could cause high latency for all tasks queued behind it, even after memory pressure is relieved and regular kworkers become available to service them. - Add CONFIG_BOOTPARAM_WQ_STALL_PANIC build-time option and workqueue.panic_on_stall_time parameter for time-based stall panic, giving systems more control over workqueue stall handling. - Replace BUG_ON() with panic() in the stall panic path for clearer intent and more informative output. * tag 'wq-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: replace BUG_ON with panic in panic_on_wq_watchdog workqueue: add time-based panic for stalls workqueue: add CONFIG_BOOTPARAM_WQ_STALL_PANIC option workqueue: Process extra works in rescuer on memory pressure workqueue: Process rescuer work items one-by-one using a cursor workqueue: Make send_mayday() take a PWQ argument directly |
||
Thomas Gleixner
|
1e83ccd592 |
sched/mmcid: Don't assume CID is CPU owned on mode switch
Shinichiro reported a KASAN UAF, which is actually an out of bounds access
in the MMCID management code.
CPU0 CPU1
T1 runs in userspace
T0: fork(T4) -> Switch to per CPU CID mode
fixup() set MM_CID_TRANSIT on T1/CPU1
T4 exit()
T3 exit()
T2 exit()
T1 exit() switch to per task mode
---> Out of bounds access.
As T1 has not scheduled after T0 set the TRANSIT bit, it exits with the
TRANSIT bit set. sched_mm_cid_remove_user() clears the TRANSIT bit in
the task and drops the CID, but it does not touch the per CPU storage.
That's functionally correct because a CID is only owned by the CPU when
the ONCPU bit is set, which is mutually exclusive with the TRANSIT flag.
Now sched_mm_cid_exit() assumes that the CID is CPU owned because the
prior mode was per CPU. It invokes mm_drop_cid_on_cpu() which clears the
not set ONCPU bit and then invokes clear_bit() with an insanely large
bit number because TRANSIT is set (bit 29).
Prevent that by actually validating that the CID is CPU owned in
mm_drop_cid_on_cpu().
Fixes:
|
||
Masami Hiramatsu (Google)
|
804c4a2209 |
tracing: Reset last_boot_info if ring buffer is reset
Commit |
||
|
Masami Hiramatsu (Google)
|
f844282dee |
tracing: Fix to set write permission to per-cpu buffer_size_kb
Since the per-cpu buffer_size_kb file is writable for changing
per-cpu ring buffer size, the file should have the write access
permission.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177071301597.2293046.11683339475076917920.stgit@mhiramat.tok.corp.google.com
Fixes:
|
||
Petr Mladek
|
9abbecf408 | Merge branch 'for-6.20' into for-linus | ||
Eric Dumazet
|
b777b5e09e |
time/jiffies: Inline jiffies_to_msecs() and jiffies_to_usecs()
For common cases (HZ=100, 250 or 1000), these helpers are at most one multiply, so there is no point calling a tiny function. Keep them out of line for HZ=300 and others. This saves cycles in TCP fast path, among other things. $ scripts/bloat-o-meter -t vmlinux.old vmlinux.new add/remove: 0/8 grow/shrink: 25/89 up/down: 530/-3474 (-2944) ... nla_put_msecs 193 - -193 message_stats_print 2131 920 -1211 Total: Before=25365208, After=25362264, chg -0.01% Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Link: https://patch.msgid.link/20260210170226.57209-1-edumazet@google.com |
||
|
Linus Torvalds
|
192c015940 |
powerpc updates for 7.0
- Implement masked user access - Add support for internal only per-CPU instructions and inline the bpf_get_smp_processor_id() and bpf_get_current_task() - Fix pSeries MSI-X allocation failure when quota is exceeded - Fix recursive pci_lock_rescan_remove locking in EEH event handling - Support tailcalls with subprogs & BPF exceptions on 64bit - Extend "trusted" keys to support the PowerVM Key Wrapping Module (PKWM) Thanks to: Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li, Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, Venkat Rao Bagalkote, -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmmL7S0ACgkQpnEsdPSH ZJR2xA/9G+tZp9+2TidbLSyPT5o063uC5H5+j5QcvvHWi/ImGUNtixlDm5HcZLCR yKywE1piKYBU8HoISjzAt0+JCVd3ZjJ8chTpKgCHLXPRSBTgdR1MG+SXQysDJSWb yA4pwDikmwoLlfi+pf500F0nX2DRCRdU2Yi28ZFeaF/khJ7ebwj41QJ7LjN22+Q1 G8Kq543obZluzSoVvfG4xUK4ByWER+Zdd2F6699iMP68yw5PJ8PPc0SUGt8nuD4i FUs0Lw7XV7i/K3+zm/ZgH5+Cvn7wOIcMNkXgFlxJXkFit97KXUDijifYPoXQyKLL ksD7SPFdV0++Sc+3mWcgW4j+hQZC0Pn864unmh8C6ug3SagQ+3pE1JYWKwCmoyXd 49ROH0y+npArJ4NAc79eweunhafGcRYTSG+zV7swQvpRocMujEqa4CDz4uk1ll5W 1yAac08AN6PnfcXl2VMrcDboziTlQVFcnNQbK/ieYMC7KpgA+udw1hd2rOWNZCPd u0byXxR1ak5YaAEuyMztd/39hrExx8306Jtkh5FIRZKWGAO+3np5bi3vxk11rDni c9BGh2JIMtuPUGys3wcFPGMRTKwF2bDFW/pB+5hMHeLUdlkni9WGCX8eLe2klYsy T7fBVb4d99IVrJGYv3J1lwELgjrgXvv35XOaUiyJyZhcbng15cc= =zJoL -----END PGP SIGNATURE----- Merge tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates for 7.0 - Implement masked user access - Add bpf support for internal only per-CPU instructions and inline the bpf_get_smp_processor_id() and bpf_get_current_task() functions - Fix pSeries MSI-X allocation failure when quota is exceeded - Fix recursive pci_lock_rescan_remove locking in EEH event handling - Support tailcalls with subprogs & BPF exceptions on 64bit - Extend "trusted" keys to support the PowerVM Key Wrapping Module (PKWM) Thanks to Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li, Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, and Venkat Rao Bagalkote. * tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (27 commits) powerpc/pseries: plpks: export plpks_wrapping_is_supported docs: trusted-encryped: add PKWM as a new trust source keys/trusted_keys: establish PKWM as a trusted source pseries/plpks: add HCALLs for PowerVM Key Wrapping Module pseries/plpks: expose PowerVM wrapping features via the sysfs powerpc/pseries: move the PLPKS config inside its own sysfs directory pseries/plpks: fix kernel-doc comment inconsistencies powerpc/smp: Add check for kcalloc() failure in parse_thread_groups() powerpc: kgdb: Remove OUTBUFMAX constant powerpc64/bpf: Additional NVR handling for bpf_throw powerpc64/bpf: Support exceptions powerpc64/bpf: Add arch_bpf_stack_walk() for BPF JIT powerpc64/bpf: Avoid tailcall restore from trampoline powerpc64/bpf: Support tailcalls with subprogs powerpc64/bpf: Moving tail_call_cnt to bottom of frame powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory powerpc64/bpf: Inline bpf_get_smp_processor_id() and bpf_get_current_task/_btf() powerpc64/bpf: Support internal-only MOV instruction to resolve per-CPU addrs ... |
||
Breno Leitao
|
60325c27d3 |
printk: Add execution context (task name/CPU) to printk_info
Extend struct printk_info to include the task name, pid, and CPU number where printk messages originate. This information is captured at vprintk_store() time and propagated through printk_message to nbcon_write_context, making it available to nbcon console drivers. This is useful for consoles like netconsole that want to include execution context in their output, allowing correlation of messages with specific tasks and CPUs regardless of where the console driver actually runs. The feature is controlled by CONFIG_PRINTK_EXECUTION_CTX, which is automatically selected by CONFIG_NETCONSOLE_DYNAMIC. When disabled, the helper functions compile to no-ops with no overhead. Suggested-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: John Ogness <john.ogness@linutronix.de> Link: https://patch.msgid.link/20260206-nbcon-v7-1-62bda69b1b41@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
57cb845067 |
- A nice cleanup to the paravirt code containing a unification of the paravirt
clock interface, taming the include hell by splitting the pv_ops structure and removing of a bunch of obsolete code. Work by Juergen Gross. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmmLKHAACgkQEsHwGGHe VUrURg//Ucf+3EAIkLCmFkH0WwYmQl2JjRYww8bPAw3iJMIVxy4dMnaBbsUiAtUp kYza+pgEtvyAwwd8RIEs85c9VhZn0DKoaWV8goBH3zFH6YvIRiLwb0w2QvjkF+70 FNU+4zlvt/I3FD+tWNElAgVtkFL3Gmzm44qyLLsPtlYaJ71xFl2XB7V+TlqXMHzE m8BMenP9/CrbTlBBdNJGzAkAbWi1uAP+IydvuFNolH/F2lqVM2z5Ta3gUWWCIk/q jWrPLDZCHr2WlBZNUGamKVVH9NEh+7YNwBAGUrSNYGZFoaFjqeX6lN3djzS+wXIj 0nDoW35jN0QNKz239MdXZDf1mfpb6ZQd/iOhFjo4dAvbm+J8WPAMr98ac8wR3Dyb 2LF/BxkoKWRabxQApXSCrLPXEuqT6Qc1+lDA0bNHg51zBoqP5vRNVZRwArnzGB+O LxDKx+o4VYOf+UCaB6oQHjylbSgFvIedZ9p822hBe3QG9act8indRE8LWip7Utld peoJGgvlQ0xtClh6FjVHpvmVfAvk7Zki5ywj2GwmB/TZ0yywuGStAjE3UqY168/M gb7MSajh+HHZNj1/2+b/se4CUYlAgIPDQ+SwHJPm5TqyopvnOVi/2XWmjbx8I5jT jS0nxaxD+SbESSZ6IMAsppnAAxAYbvRHGIS+6mtNCXVkaV1pMbA= =AeFt -----END PGP SIGNATURE----- Merge tag 'x86_paravirt_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt updates from Borislav Petkov: - A nice cleanup to the paravirt code containing a unification of the paravirt clock interface, taming the include hell by splitting the pv_ops structure and removing of a bunch of obsolete code (Juergen Gross) * tag 'x86_paravirt_for_v7.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) x86/paravirt: Use XOR r32,r32 to clear register in pv_vcpu_is_preempted() x86/paravirt: Remove trailing semicolons from alternative asm templates x86/pvlocks: Move paravirt spinlock functions into own header x86/paravirt: Specify pv_ops array in paravirt macros x86/paravirt: Allow pv-calls outside paravirt.h objtool: Allow multiple pv_ops arrays x86/xen: Drop xen_mmu_ops x86/xen: Drop xen_cpu_ops x86/xen: Drop xen_irq_ops x86/paravirt: Move pv_native_*() prototypes to paravirt.c x86/paravirt: Introduce new paravirt-base.h header x86/paravirt: Move paravirt_sched_clock() related code into tsc.c x86/paravirt: Use common code for paravirt_steal_clock() riscv/paravirt: Use common code for paravirt_steal_clock() loongarch/paravirt: Use common code for paravirt_steal_clock() arm64/paravirt: Use common code for paravirt_steal_clock() arm/paravirt: Use common code for paravirt_steal_clock() sched: Move clock related paravirt code to kernel/sched paravirt: Remove asm/paravirt_api_clock.h x86/paravirt: Move thunk macros to paravirt_types.h ... |
||
|
Linus Torvalds
|
f1c538ca81 |
Updates for the VDSO subsystem:
- Provide the missing 64-bit variant of clock_getres()
This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
finally the removal of 32-bit time types from the kernel and UAPI.
- Remove the useless and broken getcpu_cache from the VDSO
The intention was to provide a trivial way to retrieve the CPU number from
the VDSO, but as the VDSO data is per process there is no way to make it
work.
- Switch get/put_unaligned() from packed struct to memcpy()
The packed struct violates strict aliasing rules which requires to pass
-fno-strict-aliasing to the compiler. As this are scalar values
__builtin_memcpy() turns them into simple loads and stores
- Use __typeof_unqual__() for __unqual_scalar_typeof()
The get/put_unaligned() changes triggered a new sparse warning when __beNN
types are used with get/put_unaligned() as sparse builds add a special
'bitwise' attribute to them which prevents sparse to evaluate the Generic
in __unqual_scalar_typeof().
Newer sparse versions support __typeof_unqual__() which avoids the problem,
but requires a recent sparse install. So this adds a sanity check to sparse
builds, which validates that sparse is available and capable of handling it.
- Force inline __cvdso_clock_getres_common()
Compilers sometimes un-inline agressively, which results in function call
overhead and problems with automatic stack variable initialization.
Interestingly enough the force inlining results in smaller code than the
un-inlined variant produced by GCC when optimizing for size.
-----BEGIN PGP SIGNATURE-----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=0ogX
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Provide the missing 64-bit variant of clock_getres()
This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
finally the removal of 32-bit time types from the kernel and UAPI.
- Remove the useless and broken getcpu_cache from the VDSO
The intention was to provide a trivial way to retrieve the CPU number
from the VDSO, but as the VDSO data is per process there is no way to
make it work.
- Switch get/put_unaligned() from packed struct to memcpy()
The packed struct violates strict aliasing rules which requires to
pass -fno-strict-aliasing to the compiler. As this are scalar values
__builtin_memcpy() turns them into simple loads and stores
- Use __typeof_unqual__() for __unqual_scalar_typeof()
The get/put_unaligned() changes triggered a new sparse warning when
__beNN types are used with get/put_unaligned() as sparse builds add a
special 'bitwise' attribute to them which prevents sparse to evaluate
the Generic in __unqual_scalar_typeof().
Newer sparse versions support __typeof_unqual__() which avoids the
problem, but requires a recent sparse install. So this adds a sanity
check to sparse builds, which validates that sparse is available and
capable of handling it.
- Force inline __cvdso_clock_getres_common()
Compilers sometimes un-inline agressively, which results in function
call overhead and problems with automatic stack variable
initialization.
Interestingly enough the force inlining results in smaller code than
the un-inlined variant produced by GCC when optimizing for size.
* tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/gettimeofday: Force inlining of __cvdso_clock_getres_common()
x86/percpu: Make CONFIG_USE_X86_SEG_SUPPORT work with sparse
compiler: Use __typeof_unqual__() for __unqual_scalar_typeof()
powerpc/vdso: Provide clock_getres_time64()
tools headers: Remove unneeded ignoring of warnings in unaligned.h
tools headers: Update the linux/unaligned.h copy with the kernel sources
vdso: Switch get/put_unaligned() from packed struct to memcpy()
parisc: Inline a type punning version of get_unaligned_le32()
vdso: Remove struct getcpu_cache
MIPS: vdso: Provide getres_time64() for 32-bit ABIs
arm64: vdso32: Provide clock_getres_time64()
ARM: VDSO: Provide clock_getres_time64()
ARM: VDSO: Patch out __vdso_clock_getres() if unavailable
x86/vdso: Provide clock_getres_time64() for x86-32
selftests: vDSO: vdso_test_abi: Add test for clock_getres_time64()
selftests: vDSO: vdso_test_abi: Use UAPI system call numbers
selftests: vDSO: vdso_config: Add configurations for clock_getres_time64()
vdso: Add prototype for __vdso_clock_getres_time64()
|
||
|
Linus Torvalds
|
353a7e8a69 |
Updates for the core time subsystem:
- Inline timecounter_cyc2time() as that is now used in the networking
hotpath. Inlining it significantly improves performance.
- Optimize the tick dependency check in case that the tracepoint is disabled,
which improves the hotpath performance in the tick management code, which
is a hotpath on transitions in and out of idle.
- The usual cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=Zh3T
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Inline timecounter_cyc2time() as that is now used in the networking
hotpath. Inlining it significantly improves performance.
- Optimize the tick dependency check in case that the tracepoint is
disabled, which improves the hotpath performance in the tick
management code, which is a hotpath on transitions in and out of
idle.
- The usual cleanups and improvements
* tag 'timers-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/kunit: Document handling of negative years of is_leap()
tick/nohz: Optimize check_tick_dependency() with early return
time/sched_clock: Use ACCESS_PRIVATE() to evaluate hrtimer::function
hrtimer: Drop _tv64() helpers
hrtimer: Remove public definition of HIGH_RES_NSEC
hrtimer: Remove unused resolution constants
time/timecounter: Inline timecounter_cyc2time()
|
||
|
Linus Torvalds
|
3381d7b2b3 |
Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the MSI
interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts, which
causes device interrupts to be delivered to a single CPU. That obviously is
counterproductive for multi-queue devices and interrupt balancing.
To work around this limitation the new infrastructure installs a dummy
irq_set_affinity() callback which captures the affinity mask and picks a
redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a new
handling function in the core, which either runs the interrupt handler in
the context of the target CPU or delegates it to irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host controller
driver.
This allows affinity control for the subordinate device MSI interrupts
instead of being randomly executed on the CPU which runs the demultiplex
handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability, but
implement less than 64 address bits. This breaks on platforms where such a
device is assigned an MSI address higher than what's supported.
With the binary 64-bit flag there is no other choice than disabling 64-bit
MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and radeon
drivers to enable them on affected platforms.
- The usual small cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=SCSQ
-----END PGP SIGNATURE-----
Merge tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the
MSI interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts,
which causes device interrupts to be delivered to a single CPU.
That obviously is counterproductive for multi-queue devices and
interrupt balancing.
To work around this limitation the new infrastructure installs a
dummy irq_set_affinity() callback which captures the affinity mask
and picks a redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a
new handling function in the core, which either runs the interrupt
handler in the context of the target CPU or delegates it to
irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host
controller driver.
This allows affinity control for the subordinate device MSI
interrupts instead of being randomly executed on the CPU which runs
the demultiplex handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability,
but implement less than 64 address bits. This breaks on platforms
where such a device is assigned an MSI address higher than what's
supported.
With the binary 64-bit flag there is no other choice than disabling
64-bit MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and
radeon drivers to enable them on affected platforms
- The usual small cleanups and improvements"
* tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ALSA: hda/intel: Make MSI address limit based on the device DMA limit
drm/radeon: Make MSI address limit based on the device DMA limit
PCI/MSI: Check the device specific address mask in msi_verify_entries()
PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask
genirq/redirect: Prevent writing MSI message on affinity change
PCI/MSI: Unmap MSI-X region on error
genirq: Update effective affinity for redirected interrupts
PCI: dwc: Enable MSI affinity support
PCI: dwc: Code cleanup
genirq: Add interrupt redirection infrastructure
genirq/msi: Correct kernel-doc in <linux/msi.h>
|
||
|
Linus Torvalds
|
66bbe4a8ed |
Updates for the interrupt core subsystem:
- Remove the interrupt timing infrastructure
This was added seven years ago to be used for power management purposes, but
that integration never happened.
- Clean up the remaining setup_percpu_irq() users
The memory allocator is available when interrupts can be requested so there
is not need for static irq_action. Move the remaining users to
request_percpu_irq() and delete the historical cruft.
- Warn when interrupt flag inconsistencies are detected in request*_irq().
Inconsistent flags can lead to hard to diagnose malfunction. The fallout of
this new warning has been addressed in next and the fixes are coming in via
the maintainer trees and the tip irq/cleanup pull requests.
- Invoke affinity notifier when CPU hotplug breaks affinity
Otherwise the code using the notifier misses the affinity change and
operates on stale information.
- The usual cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=3hJ2
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"Updates for the interrupt core subsystem:
- Remove the interrupt timing infrastructure
This was added seven years ago to be used for power management
purposes, but that integration never happened.
- Clean up the remaining setup_percpu_irq() users
The memory allocator is available when interrupts can be requested
so there is not need for static irq_action. Move the remaining
users to request_percpu_irq() and delete the historical cruft.
- Warn when interrupt flag inconsistencies are detected in
request*_irq().
Inconsistent flags can lead to hard to diagnose malfunction. The
fallout of this new warning has been addressed in next and the
fixes are coming in via the maintainer trees and the tip
irq/cleanup pull requests.
- Invoke affinity notifier when CPU hotplug breaks affinity
Otherwise the code using the notifier misses the affinity change
and operates on stale information.
- The usual cleanups and improvements"
* tag 'irq-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/proc: Replace snprintf with strscpy in register_handler_proc
genirq/cpuhotplug: Notify about affinity changes breaking the affinity mask
genirq: Move clear of kstat_irqs to free_desc()
genirq: Warn about using IRQF_ONESHOT without a threaded handler
irqdomain: Fix up const problem in irq_domain_set_name()
genirq: Remove setup_percpu_irq()
clocksource/drivers/mips-gic-timer: Move GIC timer to request_percpu_irq()
MIPS: Move IP27 timer to request_percpu_irq()
MIPS: Move IP30 timer to request_percpu_irq()
genirq: Remove __request_percpu_irq() helper
genirq: Remove IRQ timing tracking infrastructure
|
||
|
Linus Torvalds
|
36ae1c45b2 |
Scheduler changes for v7.0:
Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes: reduce
the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number
of preemption models from four to just two: 'full' and 'lazy'
on up-to-date architectures (arm64, loongarch, powerpc,
riscv, s390, x86).
None and voluntary are only available as legacy features
on platforms that don't implement lazy preemption yet,
or which don't even support preemption.
The goal is to eventually remove cond_resched() and
voluntary preemption altogether.
(Peter Zijlstra)
RSEQ based 'scheduler time slice extension' support:
This allows a thread to request a time slice extension when it
enters a critical section to avoid contention on a resource when
the thread is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
(Thomas Gleixner)
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
(Peter Zijlstra)
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU,
which improves the scalability of various workloads.
(Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching
(Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups:
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
(Shrikanth Hegde)
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
(Yury Norov)
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and
Joel Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements, which is part of the
scheduler tree in this cycle due to interdependencies with the RSEQ
based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
(Jinjie Ruan)
Scheduler core updates:
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
(Peter Zijlstra)
Fair scheduler updates/refactoring:
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
(Peter Zijlstra)
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers
for wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
(Ingo Molnar)
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of
throttled cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing (zenghongling)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Xj2f
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
||
|
Linus Torvalds
|
0923fd0419 |
Locking updates for v6.20:
Lock debugging:
- Implement compiler-driven static analysis locking context
checking, using the upcoming Clang 22 compiler's context
analysis features. (Marco Elver)
We removed Sparse context analysis support, because prior to
removal even a defconfig kernel produced 1,700+ context
tracking Sparse warnings, the overwhelming majority of which
are false positives. On an allmodconfig kernel the number of
false positive context tracking Sparse warnings grows to
over 5,200... On the plus side of the balance actual locking
bugs found by Sparse context analysis is also rather ... sparse:
I found only 3 such commits in the last 3 years. So the
rate of false positives and the maintenance overhead is
rather high and there appears to be no active policy in
place to achieve a zero-warnings baseline to move the
annotations & fixers to developers who introduce new code.
Clang context analysis is more complete and more aggressive
in trying to find bugs, at least in principle. Plus it has
a different model to enabling it: it's enabled subsystem by
subsystem, which results in zero warnings on all relevant
kernel builds (as far as our testing managed to cover it).
Which allowed us to enable it by default, similar to other
compiler warnings, with the expectation that there are no
warnings going forward. This enforces a zero-warnings baseline
on clang-22+ builds. (Which are still limited in distribution,
admittedly.)
Hopefully the Clang approach can lead to a more maintainable
zero-warnings status quo and policy, with more and more
subsystems and drivers enabling the feature. Context tracking
can be enabled for all kernel code via WARN_CONTEXT_ANALYSIS_ALL=y
(default disabled), but this will generate a lot of false positives.
( Having said that, Sparse support could still be added back,
if anyone is interested - the removal patch is still
relatively straightforward to revert at this stage. )
Rust integration updates: (Alice Ryhl, Fujita Tomonori, Boqun Feng)
- Add support for Atomic<i8/i16/bool> and replace most Rust native
AtomicBool usages with Atomic<bool>
- Clean up LockClassKey and improve its documentation
- Add missing Send and Sync trait implementation for SetOnce
- Make ARef Unpin as it is supposed to be
- Add __rust_helper to a few Rust helpers as a preparation for
helper LTO
- Inline various lock related functions to avoid additional
function calls.
WW mutexes:
- Extend ww_mutex tests and other test-ww_mutex updates (John Stultz)
Misc fixes and cleanups:
- rcu: Mark lockdep_assert_rcu_helper() __always_inline
(Arnd Bergmann)
- locking/local_lock: Include more missing headers (Peter Zijlstra)
- seqlock: fix scoped_seqlock_read kernel-doc (Randy Dunlap)
- rust: sync: Replace `kernel::c_str!` with C-Strings
(Tamir Duberstein)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=N1gA
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2026-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lock debugging:
- Implement compiler-driven static analysis locking context checking,
using the upcoming Clang 22 compiler's context analysis features
(Marco Elver)
We removed Sparse context analysis support, because prior to
removal even a defconfig kernel produced 1,700+ context tracking
Sparse warnings, the overwhelming majority of which are false
positives. On an allmodconfig kernel the number of false positive
context tracking Sparse warnings grows to over 5,200... On the plus
side of the balance actual locking bugs found by Sparse context
analysis is also rather ... sparse: I found only 3 such commits in
the last 3 years. So the rate of false positives and the
maintenance overhead is rather high and there appears to be no
active policy in place to achieve a zero-warnings baseline to move
the annotations & fixers to developers who introduce new code.
Clang context analysis is more complete and more aggressive in
trying to find bugs, at least in principle. Plus it has a different
model to enabling it: it's enabled subsystem by subsystem, which
results in zero warnings on all relevant kernel builds (as far as
our testing managed to cover it). Which allowed us to enable it by
default, similar to other compiler warnings, with the expectation
that there are no warnings going forward. This enforces a
zero-warnings baseline on clang-22+ builds (Which are still limited
in distribution, admittedly)
Hopefully the Clang approach can lead to a more maintainable
zero-warnings status quo and policy, with more and more subsystems
and drivers enabling the feature. Context tracking can be enabled
for all kernel code via WARN_CONTEXT_ANALYSIS_ALL=y (default
disabled), but this will generate a lot of false positives.
( Having said that, Sparse support could still be added back,
if anyone is interested - the removal patch is still
relatively straightforward to revert at this stage. )
Rust integration updates: (Alice Ryhl, Fujita Tomonori, Boqun Feng)
- Add support for Atomic<i8/i16/bool> and replace most Rust native
AtomicBool usages with Atomic<bool>
- Clean up LockClassKey and improve its documentation
- Add missing Send and Sync trait implementation for SetOnce
- Make ARef Unpin as it is supposed to be
- Add __rust_helper to a few Rust helpers as a preparation for
helper LTO
- Inline various lock related functions to avoid additional function
calls
WW mutexes:
- Extend ww_mutex tests and other test-ww_mutex updates (John
Stultz)
Misc fixes and cleanups:
- rcu: Mark lockdep_assert_rcu_helper() __always_inline (Arnd
Bergmann)
- locking/local_lock: Include more missing headers (Peter Zijlstra)
- seqlock: fix scoped_seqlock_read kernel-doc (Randy Dunlap)
- rust: sync: Replace `kernel::c_str!` with C-Strings (Tamir
Duberstein)"
* tag 'locking-core-2026-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits)
locking/rwlock: Fix write_trylock_irqsave() with CONFIG_INLINE_WRITE_TRYLOCK
rcu: Mark lockdep_assert_rcu_helper() __always_inline
compiler-context-analysis: Remove __assume_ctx_lock from initializers
tomoyo: Use scoped init guard
crypto: Use scoped init guard
kcov: Use scoped init guard
compiler-context-analysis: Introduce scoped init guards
cleanup: Make __DEFINE_LOCK_GUARD handle commas in initializers
seqlock: fix scoped_seqlock_read kernel-doc
tools: Update context analysis macros in compiler_types.h
rust: sync: Replace `kernel::c_str!` with C-Strings
rust: sync: Inline various lock related methods
rust: helpers: Move #define __rust_helper out of atomic.c
rust: wait: Add __rust_helper to helpers
rust: time: Add __rust_helper to helpers
rust: task: Add __rust_helper to helpers
rust: sync: Add __rust_helper to helpers
rust: refcount: Add __rust_helper to helpers
rust: rcu: Add __rust_helper to helpers
rust: processor: Add __rust_helper to helpers
...
|
||
|
Linus Torvalds
|
4d84667627 |
Performance events changes for v7.0:
x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs.
Compared to previous iterations of the Intel PMU code, there's
been a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to
replace the Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
(Dapeng Mi)
- Likewise, a large series adds uncore PMU support for
Intel Diamond Rapids (DMR) CPUs, which center around these
four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and
each IMH die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA,
UBR, PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
(Zide Chen)
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang
and Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL)
CPUs, which are a low-power variant of Panther Lake.
(Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code. (Martin Schiller)
Performance enhancements:
- core: Speed up kexec shutdown by avoiding unnecessary
cross CPU calls. (Jan H. Schönherr)
- core: Fix slow perf_event_task_exit() with LBR callstacks
(Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize
the unwinding code for other architectures. (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=4SRB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
"x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs
(Dapeng Mi)
Compared to previous iterations of the Intel PMU code, there's been
a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to replace the
Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
- Likewise, a large series adds uncore PMU support for Intel Diamond
Rapids (DMR) CPUs (Zide Chen)
This centers around these four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and each IMH
die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA, UBR,
PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang and
Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL) CPUs,
which are a low-power variant of Panther Lake (Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code (Martin Schiller)
Performance enhancements:
- Speed up kexec shutdown by avoiding unnecessary cross CPU calls
(Jan H. Schönherr)
- Fix slow perf_event_task_exit() with LBR callstacks (Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize the
unwinding code for other architectures (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)"
* tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
s390: remove kvm_types.h from Kbuild
uprobes: Fix incorrect lockdep condition in filter_chain()
x86/ibs: Fix typo in dc_l2tlb_miss comment
x86/uprobes: Fix XOL allocation failure for 32-bit tasks
perf/x86/intel/uncore: Convert comma to semicolon
perf/x86/intel: Add support for rdpmc user disable feature
perf/x86: Use macros to replace magic numbers in attr_rdpmc
perf/x86/intel: Add core PMU support for Novalake
perf/x86/intel: Add support for PEBS memory auxiliary info field in NVL
perf/x86/intel: Add core PMU support for DMR
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
perf/x86/intel: Support the 4 new OMR MSRs introduced in DMR and NVL
perf/core: Fix slow perf_event_task_exit() with LBR callstacks
perf/core: Speed up kexec shutdown by avoiding unnecessary cross CPU calls
uprobes: use kmap_local_page() for temporary page mappings
arm/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
mips/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
arm64/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
riscv/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
perf/x86/intel/uncore: Add Nova Lake support
...
|
||
|
Linus Torvalds
|
f17b474e36 |
bpf-next-7.0
-----BEGIN PGP SIGNATURE-----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=cBdK
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support associating BPF program with struct_ops (Amery Hung)
- Switch BPF local storage to rqspinlock and remove recursion detection
counters which were causing false positives (Amery Hung)
- Fix live registers marking for indirect jumps (Anton Protopopov)
- Introduce execution context detection BPF helpers (Changwoo Min)
- Improve verifier precision for 32bit sign extension pattern
(Cupertino Miranda)
- Optimize BTF type lookup by sorting vmlinux BTF and doing binary
search (Donglin Peng)
- Allow states pruning for misc/invalid slots in iterator loops (Eduard
Zingerman)
- In preparation for ASAN support in BPF arenas teach libbpf to move
global BPF variables to the end of the region and enable arena kfuncs
while holding locks (Emil Tsalapatis)
- Introduce support for implicit arguments in kfuncs and migrate a
number of them to new API. This is a prerequisite for cgroup
sub-schedulers in sched-ext (Ihor Solodrai)
- Fix incorrect copied_seq calculation in sockmap (Jiayuan Chen)
- Fix ORC stack unwind from kprobe_multi (Jiri Olsa)
- Speed up fentry attach by using single ftrace direct ops in BPF
trampolines (Jiri Olsa)
- Require frozen map for calculating map hash (KP Singh)
- Fix lock entry creation in TAS fallback in rqspinlock (Kumar
Kartikeya Dwivedi)
- Allow user space to select cpu in lookup/update operations on per-cpu
array and hash maps (Leon Hwang)
- Make kfuncs return trusted pointers by default (Matt Bobrowski)
- Introduce "fsession" support where single BPF program is executed
upon entry and exit from traced kernel function (Menglong Dong)
- Allow bpf_timer and bpf_wq use in all programs types (Mykyta
Yatsenko, Andrii Nakryiko, Kumar Kartikeya Dwivedi, Alexei
Starovoitov)
- Make KF_TRUSTED_ARGS the default for all kfuncs and clean up their
definition across the tree (Puranjay Mohan)
- Allow BPF arena calls from non-sleepable context (Puranjay Mohan)
- Improve register id comparison logic in the verifier and extend
linked registers with negative offsets (Puranjay Mohan)
- In preparation for BPF-OOM introduce kfuncs to access memcg events
(Roman Gushchin)
- Use CFI compatible destructor kfunc type (Sami Tolvanen)
- Add bitwise tracking for BPF_END in the verifier (Tianci Cao)
- Add range tracking for BPF_DIV and BPF_MOD in the verifier (Yazhou
Tang)
- Make BPF selftests work with 64k page size (Yonghong Song)
* tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (268 commits)
selftests/bpf: Fix outdated test on storage->smap
selftests/bpf: Choose another percpu variable in bpf for btf_dump test
selftests/bpf: Remove test_task_storage_map_stress_lookup
selftests/bpf: Update task_local_storage/task_storage_nodeadlock test
selftests/bpf: Update task_local_storage/recursion test
selftests/bpf: Update sk_storage_omem_uncharge test
bpf: Switch to bpf_selem_unlink_nofail in bpf_local_storage_{map_free, destroy}
bpf: Support lockless unlink when freeing map or local storage
bpf: Prepare for bpf_selem_unlink_nofail()
bpf: Remove unused percpu counter from bpf_local_storage_map_free
bpf: Remove cgroup local storage percpu counter
bpf: Remove task local storage percpu counter
bpf: Change local_storage->lock and b->lock to rqspinlock
bpf: Convert bpf_selem_unlink to failable
bpf: Convert bpf_selem_link_map to failable
bpf: Convert bpf_selem_unlink_map to failable
bpf: Select bpf_local_storage_map_bucket based on bpf_local_storage
selftests/xsk: fix number of Tx frags in invalid packet
selftests/xsk: properly handle batch ending in the middle of a packet
bpf: Prevent reentrance into call_rcu_tasks_trace()
...
|
||
|
Linus Torvalds
|
a7423e6ea2 |
Modules changes for v7.0-rc1
Module signing:
- Remove SHA-1 support for signing modules. SHA-1 is no longer
considered secure for signatures due to vulnerabilities that can
lead to hash collisions. None of the major distributions use
SHA-1 anymore, and the kernel has defaulted to SHA-512 since
v6.11. Note that loading SHA-1 signed modules is still supported.
- Update scripts/sign-file to use only the OpenSSL CMS API for
signing. As SHA-1 support is gone, we can drop the legacy PKCS#7
API which was limited to SHA-1. This also cleans up support for
legacy OpenSSL versions.
Cleanups and fixes:
- Use system_dfl_wq instead of the per-cpu system_wq following the
ongoing workqueue API refactoring.
- Avoid open-coded kvrealloc() in module decompression logic by
using the standard helper.
- Improve section annotations by replacing the custom __modinit
with __init_or_module and removing several unused __INIT*_OR_MODULE
macros.
- Fix kernel-doc warnings in include/linux/moduleparam.h.
- Ensure set_module_sig_enforced is only declared when module
signing is enabled.
- Fix gendwarfksyms build failures on 32-bit hosts.
MAINTAINERS:
- Update the module subsystem entry to reflect the maintainer
rotation and update the git repository link.
The changes have been soaking in linux-next since -rc2.
Note that like Daniel mentioned in the previous pull request [1], we
rotate maintainership every 6 months, and I will be handling the module
subsystem pull requests for the first half of this year.
Link: https://lore.kernel.org/r/20251203234840.3720-1-da.gomez@kernel.org [1]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSE9au1u/dCZerzchhaByWrOaGnegUCaYYeeAAKCRBaByWrOaGn
epIxAQDU/VSAC491S9/5dAUeGbOis9/p6QJKQlNgEqU4oTlOsgEA0p8BZ9Spkwzd
v9BfIl3j9qVt7wUdlLdbHfdvPgtUVgc=
=at6w
-----END PGP SIGNATURE-----
Merge tag 'modules-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Module signing:
- Remove SHA-1 support for signing modules.
SHA-1 is no longer considered secure for signatures due to
vulnerabilities that can lead to hash collisions. None of the major
distributions use SHA-1 anymore, and the kernel has defaulted to
SHA-512 since v6.11.
Note that loading SHA-1 signed modules is still supported.
- Update scripts/sign-file to use only the OpenSSL CMS API for
signing.
As SHA-1 support is gone, we can drop the legacy PKCS#7 API which
was limited to SHA-1. This also cleans up support for legacy
OpenSSL versions.
Cleanups and fixes:
- Use system_dfl_wq instead of the per-cpu system_wq following the
ongoing workqueue API refactoring.
- Avoid open-coded kvrealloc() in module decompression logic by using
the standard helper.
- Improve section annotations by replacing the custom __modinit with
__init_or_module and removing several unused __INIT*_OR_MODULE
macros.
- Fix kernel-doc warnings in include/linux/moduleparam.h.
- Ensure set_module_sig_enforced is only declared when module signing
is enabled.
- Fix gendwarfksyms build failures on 32-bit hosts.
MAINTAINERS:
- Update the module subsystem entry to reflect the maintainer
rotation and update the git repository link"
* tag 'modules-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
modules: moduleparam.h: fix kernel-doc comments
module: Only declare set_module_sig_enforced when CONFIG_MODULE_SIG=y
module/decompress: Avoid open-coded kvrealloc()
gendwarfksyms: Fix build on 32-bit hosts
sign-file: Use only the OpenSSL CMS API for signing
module: Remove SHA-1 support for module signing
module: replace use of system_wq with system_dfl_wq
params: Replace __modinit with __init_or_module
module: Remove unused __INIT*_OR_MODULE macros
MAINTAINERS: Update module subsystem maintainers and repository
|
||
|
Linus Torvalds
|
08df88fa14 |
This update includes the following changes:
API:
- Fix race condition in hwrng core by using RCU.
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode.
- Add test vectors for authenc(hmac(sha384),cbc(aes)).
- Add test vectors for authenc(hmac(sha224),cbc(aes)).
- Add test vectors for authenc(hmac(md5),cbc(des3_ede)).
- Add lz4 support in hisi_zip.
- Only allow clear key use during self-test in s390/{phmac,paes}.
Drivers:
- Set rng quality to 900 in airoha.
- Add gcm(aes) support for AMD/Xilinx Versal device.
- Allow tfms to share device in hisilicon/trng.
-----BEGIN PGP SIGNATURE-----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=n4fL
-----END PGP SIGNATURE-----
Merge tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
|
||
Oleg Nesterov
|
1cf2e88e06
|
Revert "pid: make __task_pid_nr_ns(ns => NULL) safe for zombie callers"
This reverts commit |
||
Mateusz Guzik
|
87caaeef79
|
pidfs: implement ino allocation without the pidmap lock
This paves the way for scalable PID allocation later. The 32 bit variant merely takes a spinlock for simplicity, the 64 bit variant uses a scalable scheme. Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Link: https://patch.msgid.link/20260120184539.1480930-1-mjguzik@gmail.com Co-developed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
Christian Brauner
|
8021824904
|
pidfs: convert rb-tree to rhashtable
Mateusz reported performance penalties [1] during task creation because pidfs uses pidmap_lock to add elements into the rbtree. Switch to an rhashtable to have separate fine-grained locking and to decouple from pidmap_lock moving all heavy manipulations outside of it. Convert the pidfs inode-to-pid mapping from an rb-tree with seqcount protection to an rhashtable. This removes the global pidmap_lock contention from pidfs_ino_get_pid() lookups and allows the hashtable insert to happen outside the pidmap_lock. pidfs_add_pid() is split. pidfs_prepare_pid() allocates inode number and initializes pid fields and is called inside pidmap_lock. pidfs_add_pid() inserts pid into rhashtable and is called outside pidmap_lock. Insertion into the rhashtable can fail and memory allocation may happen so we need to drop the spinlock. To guard against accidently opening an already reaped task pidfs_ino_get_pid() uses additional checks beyond pid_vnr(). If pid->attr is PIDFS_PID_DEAD or NULL the pid either never had a pidfd or it already went through pidfs_exit() aka the process as already reaped. If pid->attr is valid check PIDFS_ATTR_BIT_EXIT to figure out whether the task has exited. This slightly changes visibility semantics: pidfd creation is denied after pidfs_exit() runs, which is just before the pid number is removed from the via free_pid(). That should not be an issue though. Link: https://lore.kernel.org/20251206131955.780557-1-mjguzik@gmail.com [1] Link: https://patch.msgid.link/20260120-work-pidfs-rhashtable-v2-1-d593c4d0f576@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |