The eval_map_work_func() function, though queued in eval_map_wq,
holds the trace_event_sem read-write lock for a long time during
kernel boot. This causes blocking issues for other functions.
Rename eval_map_wq to trace_init_wq and make it global, thereby
allowing other parts of tracing to schedule work on this queue
asynchronously and avoiding blockage of the main boot thread.
Link: https://patch.msgid.link/20260204015344.162818-1-tianyaxiong@kylinos.cn
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Two minor fixes for DMA-mapping subsystem:
- check for the rare case of the allocation failure of the global CMA pool
(Shanker Donthineni)
- avoid perf buffer overflow when tracing large scatter-gather lists
(Deepanshu Kartikey)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaYXTzAAKCRCJp1EFxbsS
REbUAP40hTgNNGjlbV/b6nES4P/SuZ5a8p05+YWF7bTOVf/pMwEA8EHFz5DLsKeS
1bX7/X2wzEYOyJ7v1S+PYxIswn9A5AY=
=2IQo
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.19-2026-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two minor fixes for the DMA-mapping subsystem:
- check for the rare case of the allocation failure of the global CMA
pool (Shanker Donthineni)
- avoid perf buffer overflow when tracing large scatter-gather lists
(Deepanshu Kartikey)"
* tag 'dma-mapping-6.19-2026-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma: contiguous: Check return value of dma_contiguous_reserve_area()
tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow
Called when copy_process() is called to copy state to a new child.
Right now this is just a stub, but will be used shortly to properly
handle fork'ing of task based io_uring restrictions.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
call_rcu_tasks_trace() is not safe from in_nmi() and not reentrant.
To prevent deadlock on raw_spin_lock_rcu_node(rtpcp) or memory corruption
defer to irq_work when IRQs are disabled. call_rcu_tasks_generic()
protects itself with local_irq_save().
Note when bpf_async_cb->refcnt drops to zero it's safe to reuse
bpf_async_cb->worker for a different irq_work callback, since
bpf_async_schedule_op() -> irq_work_queue(&cb->worker);
is only called when refcnt >= 1.
Fixes: 1bfbc267ec ("bpf: Enable bpf_timer and bpf_wq in any context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260205190233.912-1-alexei.starovoitov@gmail.com
Currently, bpf_map_get_info_by_fd calculates and caches the hash of the
map regardless of the map's frozen state.
This leads to a TOCTOU bug where userspace can call
BPF_OBJ_GET_INFO_BY_FD to cache the hash and then modify the map
contents before freezing.
Therefore, a trusted loader can be tricked into verifying the stale hash
while loading the modified contents.
Fix this by returning -EPERM if the map is not frozen when the hash is
requested. This ensures the hash is only generated for the final,
immutable state of the map.
Fixes: ea2e6467ac ("bpf: Return hashes of maps in BPF_OBJ_GET_INFO_BY_FD")
Reported-by: Toshi Piazza <toshi.piazza@microsoft.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260205070755.695776-1-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Practical BPF signatures are significantly smaller than
KMALLOC_MAX_CACHE_SIZE
Allowing larger sizes opens the door for abuse by passing excessive
size values and forcing the kernel into expensive allocation paths (via
kmalloc_large or vmalloc).
Fixes: 3492715683 ("bpf: Implement signature verification for BPF programs")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260205063807.690823-1-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The linker script scripts/module.lds.S specifies that all input
__klp_objects sections should be consolidated into an output section of
the same name, and start/stop symbols should be created to enable
scripts/livepatch/init.c to locate this data.
This start/stop pattern is not ideal for modules because the symbols are
created even if no __klp_objects input sections are present.
Consequently, a dummy __klp_objects section also appears in the
resulting module. This unnecessarily pollutes non-livepatch modules.
Instead, since modules are relocatable files, the usual method for
locating consolidated data in a module is to read its section table.
This approach avoids the aforementioned problem.
The klp_modinfo already stores a copy of the entire section table with
the final addresses. Introduce a helper function that
scripts/livepatch/init.c can call to obtain the location of the
__klp_objects section from this data.
Fixes: dd590d4d57 ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Link: https://patch.msgid.link/20260123102825.3521961-2-petr.pavlu@suse.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The fields of ftrace specific events (events used to save ftrace internal
events like function traces and trace_printk) are generated similarly to
how normal trace event fields are generated. That is, the fields are added
to a trace_events_fields array that saves the name, offset, size,
alignment and signness of the field. It is used to produce the output in
the format file in tracefs so that tooling knows how to parse the binary
data of the trace events.
The issue is that some of the ftrace event structures are packed. The
function graph exit event structures are one of them. The 64 bit calltime
and rettime fields end up 4 byte aligned, but the algorithm to show to
userspace shows them as 8 byte aligned.
The macros that create the ftrace events has one for embedded structure
fields. There's two macros for theses fields:
__field_desc() and __field_packed()
The difference of the latter macro is that it treats the field as packed.
Rename that field to __field_desc_packed() and create replace the
__field_packed() to be a normal field that is packed and have the calltime
and rettime use those.
This showed up on 32bit architectures for function graph time fields. It
had:
~# cat /sys/kernel/tracing/events/ftrace/funcgraph_exit/format
[..]
field:unsigned long func; offset:8; size:4; signed:0;
field:unsigned int depth; offset:12; size:4; signed:0;
field:unsigned int overrun; offset:16; size:4; signed:0;
field:unsigned long long calltime; offset:24; size:8; signed:0;
field:unsigned long long rettime; offset:32; size:8; signed:0;
Notice that overrun is at offset 16 with size 4, where in the structure
calltime is at offset 20 (16 + 4), but it shows the offset at 24. That's
because it used the alignment of unsigned long long when used as a
declaration and not as a member of a structure where it would be aligned
by word size (in this case 4).
By using the proper structure alignment, the format has it at the correct
offset:
~# cat /sys/kernel/tracing/events/ftrace/funcgraph_exit/format
[..]
field:unsigned long func; offset:8; size:4; signed:0;
field:unsigned int depth; offset:12; size:4; signed:0;
field:unsigned int overrun; offset:16; size:4; signed:0;
field:unsigned long long calltime; offset:20; size:8; signed:0;
field:unsigned long long rettime; offset:28; size:8; signed:0;
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: "jempty.liang" <imntjempty@163.com>
Link: https://patch.msgid.link/20260204113628.53faec78@gandalf.local.home
Fixes: 04ae87a520 ("ftrace: Rework event_create_dir()")
Closes: https://lore.kernel.org/all/20260130015740.212343-1-imntjempty@163.com/
Closes: https://lore.kernel.org/all/20260202123342.2544795-1-imntjempty@163.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Replace prog and callback in bpf_async_cb after removing visibility of
bpf_async_cb in bpf_async_cancel_and_free() to increase the chances the
scheduled async callbacks short-circuit execution and exit early, and
not starting a RCU tasks trace section. This improves the overall time
spent in running the wq selftest.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260205003853.527571-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When freeing a bpf_async_cb in bpf_async_cb_rcu_tasks_trace_free(), in
case the wq callback is not scheduled, doing cancel_work() currently
returns false and leads to retry of RCU tasks trace grace period. If the
callback is never scheduled, we keep retrying indefinitely and don't put
the prog reference.
Since the only race we care about here is against a potentially running
wq callback in the first grace period, it should finish by the second
grace period, hence check work_busy() result to detect presence of
running wq callback if it's not pending, otherwise free the object
immediately without retrying.
Reasoning behind the check and its correctness with racing wq callback
invocation: cancel_work is supposed to be synchronized, hence calling it
first and getting false would mean that work is definitely not pending,
at this point, either the work is not scheduled at all or already
running, or we race and it already finished by the time we checked for
it using work_busy(). In case it is running, we synchronize using
pool->lock to check the current work running there, if we match, it
means we extend the wait by another grace period using retry = true,
otherwise either the work already finished running or was never
scheduled, so we can free the bpf_async_cb right away.
Fixes: 1bfbc267ec ("bpf: Enable bpf_timer and bpf_wq in any context")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260205003853.527571-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
All are singletons - please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaYPcbwAKCRDdBJ7gKXxA
jpM9AQDRiBlZRBdYY8/nS2zMc8hE7s5O3koXu/UMf2O01aJjsgD6AssmcJzkbLir
O1mlBSD0wlR3TZLEqSOUYIxgw7evLww=
=ZHeq
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2026-02-04-15-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Five hotfixes. Two are cc:stable, two are for MM.
All are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-02-04-15-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Documentation: document liveupdate cmdline parameter
mm, shmem: prevent infinite loop on truncate race
mailmap: update Alexander Mikhalitsyn's emails
liveupdate: luo_file: do not clear serialized_data on unfreeze
x86/kfence: fix booting on 32bit non-PAE systems
- Fix race where sched_class operations (sched_setscheduler() and friends)
could be invoked on dead tasks after sched_ext_dead() already ran, causing
invalid SCX task state transitions and NULL pointer dereferences. This was
a regression from the cgroup exit ordering fix which moved
sched_ext_free() to finish_task_switch().
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaYPIhw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGS3HAQChF4sOgoD67cul36LJaeiQzjLCh9iTU9vi2lB4
slJb5QD/dJhrC0T2ZVRm5rHVxckIx7KeFwbzhvlrUD7l+zEaAwo=
=ysQE
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fix from Tejun Heo:
- Fix race where sched_class operations (sched_setscheduler() and
friends) could be invoked on dead tasks after sched_ext_dead()
already ran, causing invalid SCX task state transitions and NULL
pointer dereferences.
This was a regression from the cgroup exit ordering fix which
moved sched_ext_free() to finish_task_switch().
* tag 'sched_ext-for-6.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Short-circuit sched_class operations on dead tasks
7900aa699c ("sched_ext: Fix cgroup exit ordering by moving sched_ext_free()
to finish_task_switch()") moved sched_ext_free() to finish_task_switch() and
renamed it to sched_ext_dead() to fix cgroup exit ordering issues. However,
this created a race window where certain sched_class ops may be invoked on
dead tasks leading to failures - e.g. sched_setscheduler() may try to switch a
task which finished sched_ext_dead() back into SCX triggering invalid SCX task
state transitions.
Add task_dead_and_done() which tests whether a task is TASK_DEAD and has
completed its final context switch, and use it to short-circuit sched_class
operations which may be called on dead tasks.
Fixes: 7900aa699c ("sched_ext: Fix cgroup exit ordering by moving sched_ext_free() to finish_task_switch()")
Reported-by: Andrea Righi <arighi@nvidia.com>
Link: http://lkml.kernel.org/r/20260202151341.796959-1-arighi@nvidia.com
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Previously, the verifier only tracked positive constant deltas between
linked registers using BPF_ADD. This limitation meant patterns like:
r1 = r0;
r1 += -4;
if r1 s>= 0 goto l0_%=; // r1 >= 0 implies r0 >= 4
// verifier couldn't propagate bounds back to r0
if r0 != 0 goto l0_%=;
r0 /= 0; // Verifier thinks this is reachable
l0_%=:
Similar limitation exists for 32-bit registers.
With this change, the verifier can now track negative deltas in reg->off
enabling bound propagation for the above pattern.
For alu32, we make sure the destination register has the upper 32 bits
as 0s before creating the link. BPF_ADD_CONST is split into
BPF_ADD_CONST64 and BPF_ADD_CONST32, the latter is used in case of alu32
and sync_linked_regs uses this to zext the result if known_reg has this
flag.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260204151741.2678118-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch implements bitwise tracking (tnum analysis) for BPF_END
(byte swap) operation.
Currently, the BPF verifier does not track value for BPF_END operation,
treating the result as completely unknown. This limits the verifier's
ability to prove safety of programs that perform endianness conversions,
which are common in networking code.
For example, the following code pattern for port number validation:
int test(struct pt_regs *ctx) {
__u64 x = bpf_get_prandom_u32();
x &= 0x3f00; // Range: [0, 0x3f00], var_off: (0x0; 0x3f00)
x = bswap16(x); // Should swap to range [0, 0x3f], var_off: (0x0; 0x3f)
if (x > 0x3f) goto trap;
return 0;
trap:
return *(u64 *)NULL; // Should be unreachable
}
Currently generates verifier output:
1: (54) w0 &= 16128 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=16128,var_off=(0x0; 0x3f00))
2: (d7) r0 = bswap16 r0 ; R0=scalar()
3: (25) if r0 > 0x3f goto pc+2 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=63,var_off=(0x0; 0x3f))
Without this patch, even though the verifier knows `x` has certain bits
set, after bswap16, it loses all tracking information and treats port
as having a completely unknown value [0, 65535].
According to the BPF instruction set[1], there are 3 kinds of BPF_END:
1. `bswap(16|32|64)`: opcode=0xd7 (BPF_END | BPF_ALU64 | BPF_TO_LE)
- do unconditional swap
2. `le(16|32|64)`: opcode=0xd4 (BPF_END | BPF_ALU | BPF_TO_LE)
- on big-endian: do swap
- on little-endian: truncation (16/32-bit) or no-op (64-bit)
3. `be(16|32|64)`: opcode=0xdc (BPF_END | BPF_ALU | BPF_TO_BE)
- on little-endian: do swap
- on big-endian: truncation (16/32-bit) or no-op (64-bit)
Since BPF_END operations are inherently bit-wise permutations, tnum
(bitwise tracking) offers the most efficient and precise mechanism
for value analysis. By implementing `tnum_bswap16`, `tnum_bswap32`,
and `tnum_bswap64`, we can derive exact `var_off` values concisely,
directly reflecting the bit-level changes.
Here is the overview of changes:
1. In `tnum_bswap(16|32|64)` (kernel/bpf/tnum.c):
Call `swab(16|32|64)` function on the value and mask of `var_off`, and
do truncation for 16/32-bit cases.
2. In `adjust_scalar_min_max_vals` (kernel/bpf/verifier.c):
Call helper function `scalar_byte_swap`.
- Only do byte swap when
* alu64 (unconditional swap) OR
* switching between big-endian and little-endian machines.
- If need do byte swap:
* Firstly call `tnum_bswap(16|32|64)` to update `var_off`.
* Then reset the bound since byte swap scrambles the range.
- For 16/32-bit cases, truncate dst register to match the swapped size.
This enables better verification of networking code that frequently uses
byte swaps for protocol processing, reducing false positive rejections.
[1] https://www.kernel.org/doc/Documentation/bpf/standardization/instruction-set.rst
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Yazhou Tang <tangyazhou518@outlook.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260204111503.77871-2-ziye@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Do not schedule timer/wq operation on a cpu that is in irq_work
callback that is processing async_cmds queue.
Otherwise the following loop is possible:
bpf_timer_start() -> bpf_async_schedule_op() -> irq_work_queue().
irqrestore -> bpf_async_irq_worker() -> tracepoint -> bpf_timer_start().
Fixes: 1bfbc267ec ("bpf: Enable bpf_timer and bpf_wq in any context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260204055147.54960-4-alexei.starovoitov@gmail.com
Though hrtimer_start/cancel() inlines all of the smaller helpers in
hrtimer.c and only call timerqueue_add/del() from lib/timerqueue.c where
everything is not traceable and not kprobe-able (because all files in
lib/ are not traceable), there are tracepoints within hrtimer that are
called with locks held. Therefore prevent the deadlock by tightening
conditions when timer/wq can be called synchronously.
hrtimer/wq are using raw_spin_lock_irqsave(), so irqs_disabled() is enough.
Fixes: 1bfbc267ec ("bpf: Enable bpf_timer and bpf_wq in any context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260204055147.54960-2-alexei.starovoitov@gmail.com
Merge updates related to runtime PM for 6.20-rc1/7.0-rc1:
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
* pm-runtime:
drm: Discard pm_runtime_put() return value
genirq/chip: Change irq_chip_pm_put() return type to void
scsi: ufs: core: Discard pm_runtime_put() return values
platform/chrome: cros_hps_i2c: Discard pm_runtime_put() return value
coresight: Discard pm_runtime_put() return values
hwspinlock: omap: Discard pm_runtime_put() return value
watchdog: rzv2h_wdt: Discard pm_runtime_put() return value
watchdog: rz: Discard pm_runtime_put() return values
media: ccs: Discard pm_runtime_put() return value
drm/imagination: Discard pm_runtime_put() return value
USB: core: Discard pm_runtime_put() return value
Merge updates related to system suspend and hibernation for
6.20-rc1/7.0-rc1:
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
* pm-sleep:
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
PM: sleep: Do not flag runtime PM workqueue as freezable
sk->sk_family should be read with READ_ONCE() in
__cgroup_bpf_run_filter_sock_addr() due to IPV6_ADDRFORM.
Also, the comment there is a bit stale since commit 859051dd16
("bpf: Implement cgroup sockaddr hooks for unix sockets"), and the
kdoc has the same comment.
Let's use sk_is_inet() and sk_is_unix() and remove the comment.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260203213442.682838-2-kuniyu@google.com
During the investigation of the various transition mode issues
instrumentation revealed that the amount of bitmap operations can be
significantly reduced when a task with a transitional CID schedules out
after the fixup function completed and disabled the transition mode.
At that point the mode is stable and therefore it is not required to drop
the transitional CID back into the pool. As the fixup is complete the
potential exhaustion of the CID pool is not longer possible, so the CID can
be transferred to the scheduling out task or to the CPU depending on the
current ownership mode.
The racy snapshot of mm_cid::mode which contains both the ownership state
and the transition bit is valid because runqueue lock is held and the fixup
function of a concurrent mode switch is serialized.
Assigning the ownership right there not only spares the bitmap access for
dropping the CID it also avoids it when the task is scheduled back in as it
directly hits the fast path in both modes when the CID is within the
optimal range. If it's outside the range the next schedule in will need to
converge so dropping it right away is sensible. In the good case this also
allows to go into the fast path on the next schedule in operation.
With a thread pool benchmark which is configured to cross the mode switch
boundaries frequently this reduces the number of bitmap operations by about
30% and increases the fastpath utilization in the low single digit
percentage range.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260201192835.100194627@kernel.org
When a exiting task initiates the switch from per CPU back to per task
mode, it has already dropped its CID and marked itself inactive. But a
leftover from an earlier iteration of the rework then reassigns the per
CPU CID to the exiting task with the transition bit set.
That's wrong as the task is already marked CID inactive, which means it is
inconsistent state. It's harmless because the CID is marked in transit and
therefore dropped back into the pool when the exiting task schedules out
either through preemption or the final schedule().
Simply drop the per CPU CID when the exiting task triggered the transition.
Fixes: fbd0e71dc3 ("sched/mmcid: Provide CID ownership mode fixup functions")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260201192835.032221009@kernel.org
Shrikanth reported a hard lockup which he observed once. The stack trace
shows the following CID related participants:
watchdog: CPU 23 self-detected hard LOCKUP @ mm_get_cid+0xe8/0x188
NIP: mm_get_cid+0xe8/0x188
LR: mm_get_cid+0x108/0x188
mm_cid_switch_to+0x3c4/0x52c
__schedule+0x47c/0x700
schedule_idle+0x3c/0x64
do_idle+0x160/0x1b0
cpu_startup_entry+0x48/0x50
start_secondary+0x284/0x288
start_secondary_prolog+0x10/0x14
watchdog: CPU 11 self-detected hard LOCKUP @ plpar_hcall_norets_notrace+0x18/0x2c
NIP: plpar_hcall_norets_notrace+0x18/0x2c
LR: queued_spin_lock_slowpath+0xd88/0x15d0
_raw_spin_lock+0x80/0xa0
raw_spin_rq_lock_nested+0x3c/0xf8
mm_cid_fixup_cpus_to_tasks+0xc8/0x28c
sched_mm_cid_exit+0x108/0x22c
do_exit+0xf4/0x5d0
make_task_dead+0x0/0x178
system_call_exception+0x128/0x390
system_call_vectored_common+0x15c/0x2ec
The task on CPU11 is running the CID ownership mode change fixup function
and is stuck on a runqueue lock. The task on CPU23 is trying to get a CID
from the pool with the same runqueue lock held, but the pool is empty.
After decoding a similar issue in the opposite direction switching from per
task to per CPU mode the tool which models the possible scenarios failed to
come up with a similar loop hole.
This showed up only once, was not reproducible and according to tooling not
related to a overlooked scheduling scenario permutation. But the fact that
it was observed on a PowerPC system gave the right hint: PowerPC is a
weakly ordered architecture.
The transition mechanism does:
WRITE_ONCE(mm->mm_cid.transit, MM_CID_TRANSIT);
WRITE_ONCE(mm->mm_cid.percpu, new_mode);
fixup()
WRITE_ONCE(mm->mm_cid.transit, 0);
mm_cid_schedin() does:
if (!READ_ONCE(mm->mm_cid.percpu))
...
cid |= READ_ONCE(mm->mm_cid.transit);
so weakly ordered systems can observe percpu == false and transit == 0 even
if the fixup function has not yet completed. As a consequence the task will
not drop the CID when scheduling out before the fixup is completed, which
means the CID space can be exhausted and the next task scheduling in will
loop in mm_get_cid() and the fixup thread can livelock on the held runqueue
lock as above.
This could obviously be solved by using:
smp_store_release(&mm->mm_cid.percpu, true);
and
smp_load_acquire(&mm->mm_cid.percpu);
but that brings a memory barrier back into the scheduler hotpath, which was
just designed out by the CID rewrite.
That can be completely avoided by combining the per CPU mode and the
transit storage into a single mm_cid::mode member and ordering the stores
against the fixup functions to prevent the CPU from reordering them.
That makes the update of both states atomic and a concurrent read observes
always consistent state.
The price is an additional AND operation in mm_cid_schedin() to evaluate
the per CPU or the per task path, but that's in the noise even on strongly
ordered architectures as the actual load can be significantly more
expensive and the conditional branch evaluation is there anyway.
Fixes: fbd0e71dc3 ("sched/mmcid: Provide CID ownership mode fixup functions")
Closes: https://lore.kernel.org/bdfea828-4585-40e8-8835-247c6a8a76b0@linux.ibm.com
Reported-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260201192834.965217106@kernel.org
Ihor reported a BPF CI failure which turned out to be a live lock in the
MM_CID management. The scenario is:
A test program creates the 5th thread, which means the MM_CID users become
more than the number of CPUs (four in this example), so it switches to per
CPU ownership mode.
At this point each live task of the program has a CID associated. Assume
thread creation order assignment for simplicity.
T0 CID0 runs fork() and creates T4
T1 CID1
T2 CID2
T3 CID3
T4 --- not visible yet
T0 sets mm_cid::percpu = true and transfers its own CID to CPU0 where it
runs on and then starts the fixup which walks through the threads to
transfer the per task CIDs either to the CPU the task is running on or drop
it back into the pool if the task is not on a CPU.
During that T1 - T3 are free to schedule in and out before the fixup caught
up with them. Going through all possible permutations with a python script
revealed a few problematic cases. The most trivial one is:
T1 schedules in on CPU1 and observes percpu == true, so it transfers
its CID to CPU1
T1 is migrated to CPU2 and schedule in observes percpu == true, but
CPU2 does not have a CID associated and T1 transferred its own to
CPU1
So it has to allocate one with CPU2 runqueue lock held, but the
pool is empty, so it keeps looping in mm_get_cid().
Now T0 reaches T1 in the thread walk and tries to lock the corresponding
runqueue lock, which is held causing a full live lock.
There is a similar scenario in the reverse direction of switching from per
CPU to task mode which is way more obvious and got therefore addressed by
an intermediate mode. In this mode the CIDs are marked with MM_CID_TRANSIT,
which means that they are neither owned by the CPU nor by the task. When a
task schedules out with a transit CID it drops the CID back into the pool
making it available for others to use temporarily. Once the task which
initiated the mode switch finished the fixup it clears the transit mode and
the process goes back into per task ownership mode.
Unfortunately this insight was not mapped back to the task to CPU mode
switch as the above described scenario was not considered in the analysis.
Apply the same transit mechanism to the task to CPU mode switch to handle
these problematic cases correctly.
As with the CPU to task transition this results in a potential temporary
contention on the CID bitmap, but that's only for the time it takes to
complete the transition. After that it stays in steady mode which does not
touch the bitmap at all.
Fixes: fbd0e71dc3 ("sched/mmcid: Provide CID ownership mode fixup functions")
Closes: https://lore.kernel.org/2b7463d7-0f58-4e34-9775-6e2115cfb971@linux.dev
Reported-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260201192834.897115238@kernel.org
Extend the verifier to recognize struct bpf_timer as a valid kfunc
argument type. Previously, bpf_timer was only supported in BPF helpers.
This prepares for adding timer-related kfuncs in subsequent patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260201025403.66625-3-alexei.starovoitov@gmail.com
Refactor bpf_timer and bpf_wq to allow calling them from any context:
- add refcnt to bpf_async_cb
- map_delete_elem or map_free will drop refcnt to zero
via bpf_async_cancel_and_free()
- once refcnt is zero timer/wq_start is not allowed to make sure
that callback cannot rearm itself
- if in_hardirq defer to start/cancel operations to irq_work
Co-developed-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260201025403.66625-2-alexei.starovoitov@gmail.com
Add a kernel config option to set the default value of
workqueue.panic_on_stall, similar to CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC,
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC and CONFIG_BOOTPARAM_HUNG_TASK_PANIC.
This allows setting the number of workqueue stalls before triggering
a kernel panic at build time, which is useful for high-availability
systems that need consistent panic-on-stall, in other words, those
servers which run with CONFIG_BOOTPARAM_*_PANIC=y already.
The default remains 0 (disabled). Setting it to 1 will panic on the
first stall, and higher values will panic after that many stall
warnings. The value can still be overridden at runtime via the
workqueue.panic_on_stall boot parameter or sysfs.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The BPF stream kfuncs bpf_stream_vprintk and bpf_stream_print_stack
do not sleep and so are safe to call while holding a lock. Amend
the verifier to allow that.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-4-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new kfunc called bpf_stream_print_stack to be used by programs
that need to print out their current BPF stack. The kfunc is essentially
a wrapper around the existing bpf_stream_dump_stack functionality used
to generate stack traces for error events like may_goto violations and
BPF-side arena page faults.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260203180424.14057-2-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Scalar register IDs are used by the verifier to track relationships
between registers and enable bounds propagation across those
relationships. Once an ID becomes singular (i.e. only a single
register/stack slot carries it), it can no longer contribute to bounds
propagation and effectively becomes stale. The previous commit makes the
verifier clear such ids before caching the state.
When comparing the current and cached states for pruning, these stale
IDs can cause technically equivalent states to be considered different
and thus prevent pruning.
For example, in the selftest added in the next commit, two registers -
r6 and r7 are not linked to any other registers and get cached with
id=0, in the current state, they are both linked to each other with
id=A. Before this commit, check_scalar_ids would give temporary ids to
r6 and r7 (say tid1 and tid2) and then check_ids() would map tid1->A,
and when it would see tid2->A, it would not consider these state
equivalent.
Relax scalar ID equivalence by treating rold->id == 0 as "independent":
if the old state did not rely on any ID relationships for a register,
then any ID/linking present in the current state only adds constraints
and is always safe to accept for pruning. Implement this by returning
true immediately in check_scalar_ids() when old_id == 0.
Maintain correctness for the opposite direction (old_id != 0 && cur_id
== 0) by still allocating a temporary ID for cur_id == 0. This avoids
incorrectly allowing multiple independent current registers (id==0) to
satisfy a single linked old ID during mapping.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-5-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The maybe_widen_reg() function widens imprecise scalar registers to
unknown when their values differ between the cached and current states.
Previously, it used regs_exact() which also compared register IDs via
check_ids(), requiring registers to have matching IDs (or mapped IDs) to
be considered exact.
For scalar widening purposes, what matters is whether the value tracking
(bounds, tnum, var_off) is the same, not whether the IDs match. Two
scalars with identical value constraints but different IDs represent the
same abstract value and don't need to be widened.
Introduce scalars_exact_for_widen() that only compares the
value-tracking portion of bpf_reg_state (fields before 'id'). This
allows the verifier to preserve more scalar value information during
state merging when IDs differ but actual tracked values are identical,
reducing unnecessary widening and potentially improving verification
precision.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-4-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier assigns ids to scalar registers/stack slots when they are
linked through a mov or stack spill/fill instruction. These ids are
later used to propagate newly found bounds from one register to all
registers that share the same id. The verifier also compares the ids of
these registers in current state and cached state when making pruning
decisions.
When an ID becomes singular (i.e., only a single register or stack slot
has that ID), it can no longer participate in bounds propagation. During
comparisons between current and cached states for pruning decisions,
however, such stale IDs can prevent pruning of otherwise equivalent
states.
Find and clear all singular ids before caching a state in
is_state_visited(). struct bpf_idset which is currently unused has been
repurposed for this use case.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The next commit will allow clearing of scalar ids if no other
register/stack slot has that id. This is because if only one register
has a unique id, it can't participate in bounds propagation and is
equivalent to having no id.
But if the id of a stack slot is cleared by clear_singular_ids() in the
next commit, reading that stack slot into a register will not establish
a link because the stack slot's id is cleared.
This can happen in a situation where a register is spilled and later
loses its id due to a multiply operation (for example) and then the
stack slot's id becomes singular and can be cleared.
Make sure that scalar stack slots have an id before we read them into a
register.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some platforms require panic handling to execute on a specific CPU for
crash dump to work reliably. This can be due to firmware limitations,
interrupt routing constraints, or platform-specific requirements where
only a single CPU is able to safely enter the crash kernel.
Add the panic_force_cpu= kernel command-line parameter to redirect panic
execution to a designated CPU. When the parameter is provided, the CPU
that initially triggers panic forwards the panic context to the target CPU
via IPI, which then proceeds with the normal panic and kexec flow.
The IPI delivery is implemented as a weak function
(panic_smp_redirect_cpu) so architectures with NMI support can override it
for more reliable delivery.
If the specified CPU is invalid, offline, or a panic is already in
progress on another CPU, the redirection is skipped and panic continues on
the current CPU.
[pnina.feder@mobileye.com: fix unused variable warning]
Link: https://lkml.kernel.org/r/20260126122618.2967950-1-pnina.feder@mobileye.com
Link: https://lkml.kernel.org/r/20260122102457.1154599-1-pnina.feder@mobileye.com
Signed-off-by: Pnina Feder <pnina.feder@mobileye.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The documentation of this new API has been overlooked during its
introduction. Fill the gap.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
It may not appear obvious why kthread_affine_node() is not called before
the kthread creation completion instead of after the first wake-up.
The reason is that kthread_affine_node() applies a default affinity
behaviour that only takes place if no affinity preference have already
been passed by the kthread creation call site.
Add a comment to clarify that.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
When cpuset isolated partitions get updated, unbound kthreads get
indifferently affine to all non isolated CPUs, regardless of their
individual affinity preferences.
For example kswapd is a per-node kthread that prefers to be affine to
the node it refers to. Whenever an isolated partition is created,
updated or deleted, kswapd's node affinity is going to be broken if any
CPU in the related node is not isolated because kswapd will be affine
globally.
Fix this with letting the consolidated kthread managed affinity code do
the affinity update on behalf of cpuset.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
Unbound kthreads want to run neither on nohz_full CPUs nor on domain
isolated CPUs. And since nohz_full implies domain isolation, checking
the latter is enough to verify both.
Therefore exclude kthreads from domain isolation.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
The unbound kthreads affinity management performed by cpuset is going to
be imported to the kthread core code for consolidation purposes.
Treat kthreadd just like any other kthread.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
The managed affinity list currently contains only unbound kthreads that
have affinity preferences. Unbound kthreads globally affine by default
are outside of the list because their affinity is automatically managed
by the scheduler (through the fallback housekeeping mask) and by cpuset.
However in order to preserve the preferred affinity of kthreads, cpuset
will delegate the isolated partition update propagation to the
housekeeping and kthread code.
Prepare for that with including all unbound kthreads in the managed
affinity list.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
The kthreads preferred affinity related fields use "hotplug" as the base
of their naming because the affinity management was initially deemed to
deal with CPU hotplug.
The scope of this role is going to broaden now and also deal with
cpuset isolated partition updates.
Switch the naming accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
The set of cpuset isolated CPUs is now included in HK_TYPE_DOMAIN
housekeeping cpumask. There is no usecase left interested in just
checking what is isolated by cpuset and not by the isolcpus= kernel
boot parameter.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
Cpuset isolated partitions are now included in HK_TYPE_DOMAIN. Testing
if a CPU is part of an isolated partition alone is now useless.
Remove the superflous test.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Until now, cpuset would propagate isolated partition changes to
timer migration so that unbound timers don't get migrated to isolated
CPUs.
Since housekeeping now centralizes, synchronize and propagates isolation
cpumask changes, perform the work from that subsystem for consolidation
and consistency purposes.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Until now, cpuset would propagate isolated partition changes to
workqueues so that unbound workers get properly reaffined.
Since housekeeping now centralizes, synchronize and propagates isolation
cpumask changes, perform the work from that subsystem for consolidation
and consistency purposes.
For simplification purpose, the target function is adapted to take the
new housekeeping mask instead of the isolated mask.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
The HK_TYPE_DOMAIN housekeeping cpumask is now modifiable at runtime. In
order to synchronize against PCI probe works and make sure that no
asynchronous probing is still pending or executing on a newly isolated
CPU, the housekeeping subsystem must flush the PCI probe works.
However the PCI probe works can't be flushed easily since they are
queued to the main per-CPU workqueue pool.
Solve this with creating a PCI probe-specific pool and provide and use
the appropriate flushing API.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-pci@vger.kernel.org
The HK_TYPE_DOMAIN housekeeping cpumask is now modifiable at runtime.
In order to synchronize against vmstat workqueue to make sure
that no asynchronous vmstat work is still pending or executing on a
newly made isolated CPU, the housekeeping susbsystem must flush the
vmstat workqueues.
This involves flushing the whole mm_percpu_wq workqueue, shared with
LRU drain, introducing here a welcome side effect.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-mm@kvack.org
The HK_TYPE_DOMAIN housekeeping cpumask is now modifiable at runtime. In
order to synchronize against memcg workqueue to make sure that no
asynchronous draining is still pending or executing on a newly made
isolated CPU, the housekeeping susbsystem must flush the memcg
workqueues.
However the memcg workqueues can't be flushed easily since they are
queued to the main per-CPU workqueue pool.
Solve this with creating a memcg specific pool and provide and use the
appropriate flushing API.
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
Cc: linux-mm@kvack.org
Until now, HK_TYPE_DOMAIN used to only include boot defined isolated
CPUs passed through isolcpus= boot option. Users interested in also
knowing the runtime defined isolated CPUs through cpuset must use
different APIs: cpuset_cpu_is_isolated(), cpu_is_isolated(), etc...
There are many drawbacks to that approach:
1) Most interested subsystems want to know about all isolated CPUs, not
just those defined on boot time.
2) cpuset_cpu_is_isolated() / cpu_is_isolated() are not synchronized with
concurrent cpuset changes.
3) Further cpuset modifications are not propagated to subsystems
Solve 1) and 2) and centralize all isolated CPUs within the
HK_TYPE_DOMAIN housekeeping cpumask.
Subsystems can rely on RCU to synchronize against concurrent changes.
The propagation mentioned in 3) will be handled in further patches.
[Chen Ridong: Fix cpu_hotplug_lock deadlock and use correct static
branch API]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
