This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Add support for the SpacemiT K3 SoC reset controller. The K3 reset
driver reuses the common reset controller code and provides K3-specific
reset data for devices managed by the following units:
- MPMU (Main Power Management Unit)
- APBC (APB clock unit)
- APMU (Application Subsystem Power Management Unit)
- DCIU (DMA Control and Interface Unit)
Acked-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Extract the common reset controller code from the K1 driver into
separate reset-spacemit-common.{c,h} files to prepare for additional
SpacemiT SoCs that share the same reset controller architecture.
The common code includes handlers for reset assert and deassert
operations and probing for auxiliary bus devices.
Changes during extraction:
- Module ownership: Use dev->driver->owner instead of THIS_MODULE in
spacemit_reset_controller_register() to correctly reference the
calling driver's module.
- Rename spacemit_reset_ids to spacemit_k1_reset_ids.
- Define new namespace "RESET_SPACEMIT" for the exported common
functions (spacemit_reset_probe) and update K1 driver to import it.
This prepares for additional SpacemiT SoCs (K3) that share the same reset
controller architecture.
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.
Move the existing K1 reset driver into this new directory and rename
it to reset-spacemit-k1.c.
Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default
from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the
clock driver to register reset devices as an auxiliary device, so the
default should reflect this dependency.
Also sort the drivers/reset/Kconfig entries alphabetically.
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The driver doesn't use any symbols depending on CONFIG_OF, so drop the
dependency. Also, enable it by default when ARCH_CANAAN is selected.
Fixes: 360a7a6477 ("reset: canaan: add reset driver for Kendryte K230")
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The RZ/G2L USBPHY control driver is also used on the RZ/G3S SoC.
The RZ/G3S SoC supports a power-saving mode in which power to most USB
components (including the USBPHY control block) is turned off. Because of
this, the USBPHY control block needs to be reconfigured when returning
from power-saving mode.
Add suspend/resume support to handle runtime suspend/resume of the device,
assert/deassert the reset signal, and reinitialize the USBPHY control
block.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Propagate the return value of regmap_field_update_bits() to avoid losing
any possible error. With this, the return type of
rzg2l_usbphy_ctrl_set_pwrrdy() was updated accordingly.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
gpiod_set_value_cansleep() now returns an integer and can indicate
failures. Propagate the return value to the caller of the reset API.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Support i.MX8ULP's SIM LPAV by adding its reset map definition.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Switch to per-device reset map to allow reusing the driver for other NXP
block control IPs.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Switch to using the regmap API to allow performing register operations
under the same lock. This is needed for cases such as i.MX8ULP's SIM LPAV
where clock gating, reset control and MUX-ing is performed via the same
register (i.e. SYSCTRL0) and different subsystem APIs.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The macros defining the mask values for the EARC, EARC PHY resets,
and the DSP RUN_STALL signal can be dropped as they are not and will
not be used anywhere else except to set the value of the "mask" field
from "struct imx8mp_reset_map". In this particular case, based on the
name of the "mask" field, you can already deduce what these values are
for, which is why defining macros for them doesn't offer any new
information, nor does it help with the code readability.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This is a special device that's created dynamically and is supposed to
stay in memory forever. We also currently don't have a devlink between
it and the actual reset consumer. Suppress sysfs bind attributes so that
user-space can't unbind the device because - as of now - it will cause a
use-after-free splat from any user that puts the reset control handle.
Fixes: cee544a40e ("reset: gpio: Add GPIO-based reset controller")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Due to the auxiliary register procedure moved to ccu common module where
the module name changed to spacemit_ccu, then the reset auxiliary device
register id also need to be adjusted in order to prepare for adding new
K3 reset driver, otherwise two reset drivers will claim to support same
"compatible" auxiliary device.
In order to prevent the reset driver breakage, this commit is necessary
as a post-fix for changes introduced by two patches below, and should be
merged with them to make the patch series runtime bisectable.
("clk: spacemit: add platform SoC prefix to reset name")
("clk: spacemit: extract common ccu functions")
Link: https://lore.kernel.org/r/20260108-06-k1-clk-common-v4-4-badf635993d3@gentoo.org
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
In order to correctly handle the interaction between the reset-gpio
devices and shared GPIOs managed by GPIOLIB, we need to be able to
identify the former. Add the "compatible" property to allow us to use
the device_is_compatible() helper.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
the core clk framework. The majority diff wise is for the new Rockchip and
Qualcomm clk drivers which is mostly lines and lines of data structures to
describe the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up higher in
the diffstat this time because they added quite a few clks all over the place.
Overall it is a semi-quiet release that has some new clk drivers and the usual
fixes for clock data that was wrong or missing and non-critical cleanups that
plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver
-----BEGIN PGP SIGNATURE-----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=Ivih
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for
power management, as a preparation for future Tegra specific
changes.
- Reset controller updates with added drivers for LAN969x, eic770
and RZ/G3S SoCs.
- Protection of system controller registers on Renesas and Google SoCs,
to prevent trivially triggering a system crash from e.g. debugfs
access.
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas
-----BEGIN PGP SIGNATURE-----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=HvlN
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot enable
counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone to
bugs (GPIO controllers don't have to use the software node's name as
their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide array
of drivers in order to avoid having to use the __maybe_unused attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to user-space
in gpio-virtuser (this was previously not possible as this function
returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary calls
to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for gpio-pca953x,
which is a great addition as it's probably the most commonly used GPIO
expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEkeUTLeW1Rh17omX8BZ0uy/82hMMFAmktpZkACgkQBZ0uy/82
hMPRNg/+PEhBT1Sm9GZDL2c3urSfEyIIA97nxvV6rad75Xfj8IVy+orvyhJHJgni
ksjlvLUQLYQ1j82TlCIZDlj3dAmk3rkb6wwbcUubOb7G/xkvWHQztrnmDk4bvSdr
0vR/dEGOUDRLJxPjeQdFzEoDqLrCqy5QwugH3hd6NASBy+n/g7j2Gb4Pc8IA14wL
ogkBlP8nXVv2w7GMFESjNldWvxFnOasGuzIfM7mIBDBSjLzEANcuH/E5dNXPFIO7
kNN8eSnSfMGH0Z0DjdU9tkaAiLypw9FHqSwU6JKNjE/nzzcGV3OzDMM2vgKLETin
z9tNPBtvXOSBuFbxydWUgX20AmNo5ZEfqGXCwinTHOLwABGZPigi7Ogwxeox0SZ4
OKm37GUtZlO+dJC8bWUA82l9CwM9GDcxn7/Fv4s4vLaULUfeZHXn1OP4JZ4WmuZi
J7D5lMIiXKI9EBH95AX3c/r5drZQh1T4Rr7GJ4GG9uceYGTzsE65idI0KXTT1mbx
nMfQYvNSHGk123rN1bLQov1jZE7foXE9mQ+MzMNSWI3C1WdCGRBorqN8+wMrBU29
OLS66UorNwSCIl0XY+lIgdiW6OXBTc65jF1v+EdSZaFknEYHQm9TIxQNH+tQDYfz
irl2dhxz/iaekxO7p516iY3NeqO9Af4SfITVmAX4xDvak3tcYsU=
=Mw+x
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
GPIO machine lookup is a nice mechanism for associating GPIOs with
consumers if we don't know what kind of device the GPIO provider is or
when it will become available. However in the case of the reset-gpio, we
are already holding a reference to the device and so can reference its
firmware node. Let's setup a software node that references the relevant
GPIO and attach it to the auxiliary device we're creating.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As the reset-gpio devices are purely virtual and never instantiated from
real firmware nodes, let's convert the driver to using the - more
fitting - auxiliary bus.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Auxiliary devices really do need a parent so ahead of converting the
reset-gpios driver to registering on the auxiliary bus, make the GPIO
device that provides the reset GPIO the parent of the reset-gpio device.
To that end move the lookup of the GPIO device by fwnode to the
beginning of __reset_add_reset_gpio_device() which has the added benefit
of bailing out earlier, before allocating resources for the virtual
device, if the chip is not up yet.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
For better readability and easier maintenance order the includes
alphabetically.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The devm_regmap_field_alloc() function never returns NULL, it returns
error pointers. Update the error checking to match.
Fixes: 58128aa88867 ("reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Introduce reset controllers for AP, MISC, VI, VP and DSP subsystems and
add their reset signal mappings.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
TH1520 SoC is divided into several subsystems, shipping distinct reset
controllers with similar control logic. Let's make reset signal mapping
a data structure specific to one compatible to prepare for introduction
of more reset controllers in the future.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There are no more users of this code. Let's remove the exported symbols
and the implementation from reset core.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[p.zabel@pengutronix.de: folded in 8e6ec20e-8965-4b42-99fc-0462269ff2f1@paulmck-laptop]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The Renesas RZ/G3S SoC USB PHY HW block receives as input the USB PWRRDY
signal from the system controller. Add support for the Renesas RZ/G3S SoC.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On the Renesas RZ/G3S SoC, the USB PHY block has an input signal called
PWRRDY. This signal is managed by the system controller and must be
de-asserted after powering on the area where USB PHY resides and asserted
before powering it off.
On power-on/resume the USB PWRRDY signal need to be de-asserted before
enabling clock and switching the module to normal state (through MSTOP
support). The power-on/resume configuration sequence must be:
1/ PWRRDY=0
2/ CLK_ON=1
3/ MSTOP=0
On power-off/suspend the configuration sequence should be:
1/ MSTOP=1
2/ CLK_ON=0
3/ PWRRDY=1
The CLK_ON and MSTOP functionalities are controlled by clock drivers.
The suspend/resume support will be handled by different patches.
After long discussions with the internal HW team, it has been confirmed
that the HW connection b/w USB PHY block, the USB channels, the system
controller, clock, MSTOP, PWRRDY signal is as follows:
┌──────────────────────────────┐
│ │◄── CPG_CLKON_USB.CLK0_ON
│ USB CH0 │
┌──────────────────────────┐ │┌───────────────────────────┐ │◄── CPG_CLKON_USB.CLK2_ON
│ ┌────────┐ ││host controller registers │ │
│ │ │ ││function controller registers│
│ │ PHY0 │◄──┤└───────────────────────────┘ │
│ USB PHY │ │ └────────────▲─────────────────┘
│ └────────┘ │
│ │ CPG_BUS_PERI_COM_MSTOP.MSTOP{6, 5}_ON
│┌──────────────┐ ┌────────┐
││USHPHY control│ │ │
││ registers │ │ PHY1 │ ┌──────────────────────────────┐
│└──────────────┘ │ │◄──┤ USB CH1 │
│ └────────┘ │┌───────────────────────────┐ │◄── CPG_CLKON_USB.CLK1_ON
└─▲───────▲─────────▲──────┘ ││ host controller registers │ │
│ │ │ │└───────────────────────────┘ │
│ │ │ └────────────▲─────────────────┘
│ │ │ │
│ │ │ CPG_BUS_PERI_COM_MSTOP.MSTOP7_ON
│PWRRDY │ │
│ │ CPG_CLK_ON_USB.CLK3_ON
│ │
│ CPG_BUS_PERI_COM_MSTOP.MSTOP4_ON
│
┌────┐
│SYSC│
└────┘
where:
- CPG_CLKON_USB.CLK.CLKX_ON is the register bit controlling the clock X
of different USB blocks, X in {0, 1, 2, 3}
- CPG_BUS_PERI_COM_MSTOP.MSTOPX_ON is the register bit controlling the
MSTOP of different USB blocks, X in {4, 5, 6, 7}
- USB PHY is the USB PHY block exposing 2 ports, port0 and port1, used
by the USB CH0, USB CH1
- SYSC is the system controller block controlling the PWRRDY signal
- USB CHx are individual USB block with host and function capabilities
(USB CH0 have both host and function capabilities, USB CH1 has only
host capabilities)
The USBPHY control registers are controlled though the
reset-rzg2l-usbphy-ctrl driver. The USB PHY ports are controlled by
phy_rcar_gen3_usb2 (drivers/phy/renesas/phy-rcar-gen3-usb2.c file). The
USB PHY ports request resets from the reset-rzg2l-usbphy-ctrl driver.
The connection b/w the system controller and the USB PHY CTRL driver is
implemented through the renesas,sysc-pwrrdy device tree property
proposed in this patch. This property specifies the register offset and the
bitmask required to control the PWRRDY signal.
Since the USB PHY CTRL driver needs to be probed before any other
USB-specific driver on RZ/G3S, control of PWRRDY is passed exclusively
to it. This guarantees the correct configuration sequence between clocks,
MSTOP bits, and the PWRRDY bit on probe/resume and remove/suspend. At the
same time, changes are kept minimal by avoiding modifications to the USB
PHY driver to also handle the PWRRDY itself.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add support for reset controller in eic7700 series chips.
Provide functionality for asserting and deasserting resets
on the chip.
Signed-off-by: Yifeng Huang <huangyifeng@eswincomputing.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
LAN969x uses the same reset configuration as LAN966x, but we need to
allow compiling it when ARCH_LAN969X is selected.
A fallback compatible to LAN966x will be used.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
While the auxiliary bus was a nice bandaid, and meant that re-writing
the representation of the clock regions in devicetree was not required,
it has run its course. The "mss_top_sysreg" region that contains the
clock and reset regions, also contains pinctrl and an interrupt
controller, so the time has come rewrite the devicetree and probe the
reset controller from an mfd devicetree node, rather than implement
those drivers using the auxiliary bus. Wanting to avoid propagating this
naive/incorrect description of the hardware to the new pic64gx SoC is a
major motivating factor here.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
As per the i.MX8MP TRM, section 14.2 "AUDIO_BLK_CTRL", table 14.2.3.1.1
"memory map", the definition of the EARC control register shows that the
EARC controller software reset is controlled via bit 0, while the EARC PHY
software reset is controlled via bit 1.
This means that the current definitions of IMX8MP_AUDIOMIX_EARC_RESET_MASK
and IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK are wrong since their values would
imply that the EARC controller software reset is controlled via bit 1 and
the EARC PHY software reset is controlled via bit 2. Fix them.
Fixes: a83bc87cd3 ("reset: imx8mp-audiomix: Prepare the code for more reset bits")
Cc: stable@vger.kernel.org
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Lots of platform specific updates for Qualcomm SoCs, including a
new TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with the
M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed, Broadcom,
Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0.
-----BEGIN PGP SIGNATURE-----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=mcZR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
Make sure to drop the OF node reference taken when probing the auxiliary
device when the device is later unbound.
Fixes: 487b1b32e3 ("reset: eyeq: add platform driver")
Cc: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250708085613.15823-1-johan@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
When using MMIO with regmap, fast_io is implied. No need to set it
again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Drew Fustini <fustini@kernel.org> # for reset-th1520.c
Link: https://lore.kernel.org/r/20250813161517.4746-17-wsa+renesas@sang-engineering.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The VO subsystem of TH1520 contains a few resets for the display
pipeline -- display, MIPI DSI and HDMI controllers.
Add support for them to the reset-th1520 driver.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250813081716.2181843-3-uwu@icenowy.me
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The AST2700 reset driver is registered as an auxiliary device
due to reset and clock controller share the same register region.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250708052909.4145983-3-ryan_chen@aspeedtech.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The ephy control register on bcm63xx SoCs contain bits for
resetting individual internal phys. Use the existing bcm6345-reset
driver to set bits.
Signed-off-by: Kyle Hendry <kylehendrydev@gmail.com>
Link: https://lore.kernel.org/r/20250715234605.36216-2-kylehendrydev@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
the diff is all the new Qualcomm clk drivers added for a few SoCs they're
working on. The other two vendors with significant work this cycle are Renesas
and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some
new SoCs while Amlogic is starting a significant refactoring to simplify their
code.
The core framework gained a pair of helpers to get the 'struct device' or
'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit
tests were added for these simple helpers as well. Beyond that core change
there are lots of little fixes throughout the clk drivers for the stuff we see
every day, wrong clk driver data that affects tree topology or supported
frequencies, etc. They're not found until the clks are actually used by some
consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the
Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis tools and
possibly real humans
- A lot of little fixes here and there to things like clk tree topology,
missing frequencies, flagging clks as critical, etc. The full details are in
the commits and sub-tree merge logs
-----BEGIN PGP SIGNATURE-----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=S+dB
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.
The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.
The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.
Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...
Implement reset support for SpacemiT CCUs. A SpacemiT reset controller
device is an auxiliary device associated with a clock controller (CCU).
This patch defines the reset controllers for the MPMU, APBC, and MPMU
CCUs, which already define clock controllers. It also adds RCPU, RCPU2,
and ACPB2 CCUs, which only define resets.
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250702113709.291748-6-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>
The BRCMSTB and BRCMSTB_RESCAL reset drivers are also
used in the BCM2712, AKA the RPi5. The RPi platforms
have typically used the ARCH_BCM2835, and the PCIe
support for this SoC can use this config which depends
on these drivers so enable building them when just that
arch option is enabled to ensure the platform works as
expected.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250630175301.846082-1-pbrobinson@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20250611-rst-mpfs-aux-v1-1-c86534b473c3@baylibre.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add support for the resets on Canaan Kendryte K230 SoC. The driver
support CPU0, CPU1, L2 cache flush, hardware auto clear and software
clear resets.
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Link: https://lore.kernel.org/r/20250613-k230-reset-v4-2-e5266d2be440@pigmoral.tech
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Implement a USB2PHY port reset driver for the Renesas RZ/V2H(P) SoC.
Enable control of USB2.0 PHY reset and power-down operations, including
assert and deassert functionalities for the PHY.
Leverage device tree (OF) data to support future SoCs with similar USB2PHY
hardware but varying register configurations. Define initialization values
and control register settings to ensure flexibility for upcoming platforms.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20250415195131.281060-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add reset controller driver for the T-HEAD TH1520 SoC that manages
hardware reset lines for various subsystems. The driver currently
implements support for GPU reset control, with infrastructure in place
to extend support for NPU and Watchdog Timer resets in future updates.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250303152511.494405-3-m.wilczynski@samsung.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
