reset: imx8mp-audiomix: Drop unneeded macros

The macros defining the mask values for the EARC, EARC PHY resets,
and the DSP RUN_STALL signal can be dropped as they are not and will
not be used anywhere else except to set the value of the "mask" field
from "struct imx8mp_reset_map". In this particular case, based on the
name of the "mask" field, you can already deduce what these values are
for, which is why defining macros for them doesn't offer any new
information, nor does it help with the code readability.

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This commit is contained in:
Laurentiu Mihalcea 2025-11-26 04:42:14 -08:00 committed by Philipp Zabel
parent 16de4c6a8f
commit 212212062f

View file

@ -6,6 +6,7 @@
#include <dt-bindings/reset/imx8mp-reset-audiomix.h>
#include <linux/auxiliary_bus.h>
#include <linux/bits.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/module.h>
@ -14,11 +15,7 @@
#include <linux/reset-controller.h>
#define IMX8MP_AUDIOMIX_EARC_RESET_OFFSET 0x200
#define IMX8MP_AUDIOMIX_EARC_RESET_MASK BIT(0)
#define IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK BIT(1)
#define IMX8MP_AUDIOMIX_DSP_RUNSTALL_OFFSET 0x108
#define IMX8MP_AUDIOMIX_DSP_RUNSTALL_MASK BIT(5)
struct imx8mp_reset_map {
unsigned int offset;
@ -29,17 +26,17 @@ struct imx8mp_reset_map {
static const struct imx8mp_reset_map reset_map[] = {
[IMX8MP_AUDIOMIX_EARC_RESET] = {
.offset = IMX8MP_AUDIOMIX_EARC_RESET_OFFSET,
.mask = IMX8MP_AUDIOMIX_EARC_RESET_MASK,
.mask = BIT(0),
.active_low = true,
},
[IMX8MP_AUDIOMIX_EARC_PHY_RESET] = {
.offset = IMX8MP_AUDIOMIX_EARC_RESET_OFFSET,
.mask = IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK,
.mask = BIT(1),
.active_low = true,
},
[IMX8MP_AUDIOMIX_DSP_RUNSTALL] = {
.offset = IMX8MP_AUDIOMIX_DSP_RUNSTALL_OFFSET,
.mask = IMX8MP_AUDIOMIX_DSP_RUNSTALL_MASK,
.mask = BIT(5),
.active_low = false,
},
};