mirror of
https://github.com/torvalds/linux.git
synced 2026-03-09 19:26:35 +01:00
37a93dd5c4
Core & protocols
----------------
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls for
small helper and stack canary overhead in the fast-path. This
generates better and faster code with very small or no text size
increases, as in many cases the call generated more code than the
actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage by
up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the RX
path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without the
HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified, aligning
IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the rate
shaper of sch_cake across multiple CPUs, while still enforcing a
single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations that
are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information, saving
cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most protocols,
avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies between
the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes back
online.
Driver API
----------
- Support for switching the working mode (automatic vs manual) of a DPLL
device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties, to
generalize polarity inversion requirements for differential signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers
--------------
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram and
NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the used
H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO, leading to
12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN metadata
access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support
multi-wiphy devices and and pave the way for future device support
in the same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O31Y
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
||
|---|---|---|
| .. | ||
| ipset | ||
| ipvs | ||
| core.c | ||
| Kconfig | ||
| Makefile | ||
| nf_bpf_link.c | ||
| nf_conncount.c | ||
| nf_conntrack_acct.c | ||
| nf_conntrack_amanda.c | ||
| nf_conntrack_bpf.c | ||
| nf_conntrack_broadcast.c | ||
| nf_conntrack_core.c | ||
| nf_conntrack_ecache.c | ||
| nf_conntrack_expect.c | ||
| nf_conntrack_extend.c | ||
| nf_conntrack_ftp.c | ||
| nf_conntrack_h323_asn1.c | ||
| nf_conntrack_h323_main.c | ||
| nf_conntrack_h323_types.c | ||
| nf_conntrack_helper.c | ||
| nf_conntrack_irc.c | ||
| nf_conntrack_labels.c | ||
| nf_conntrack_netbios_ns.c | ||
| nf_conntrack_netlink.c | ||
| nf_conntrack_ovs.c | ||
| nf_conntrack_pptp.c | ||
| nf_conntrack_proto.c | ||
| nf_conntrack_proto_generic.c | ||
| nf_conntrack_proto_gre.c | ||
| nf_conntrack_proto_icmp.c | ||
| nf_conntrack_proto_icmpv6.c | ||
| nf_conntrack_proto_sctp.c | ||
| nf_conntrack_proto_tcp.c | ||
| nf_conntrack_proto_udp.c | ||
| nf_conntrack_sane.c | ||
| nf_conntrack_seqadj.c | ||
| nf_conntrack_sip.c | ||
| nf_conntrack_snmp.c | ||
| nf_conntrack_standalone.c | ||
| nf_conntrack_tftp.c | ||
| nf_conntrack_timeout.c | ||
| nf_conntrack_timestamp.c | ||
| nf_dup_netdev.c | ||
| nf_flow_table_bpf.c | ||
| nf_flow_table_core.c | ||
| nf_flow_table_inet.c | ||
| nf_flow_table_ip.c | ||
| nf_flow_table_offload.c | ||
| nf_flow_table_path.c | ||
| nf_flow_table_procfs.c | ||
| nf_flow_table_xdp.c | ||
| nf_hooks_lwtunnel.c | ||
| nf_internals.h | ||
| nf_log.c | ||
| nf_log_syslog.c | ||
| nf_nat_amanda.c | ||
| nf_nat_bpf.c | ||
| nf_nat_core.c | ||
| nf_nat_ftp.c | ||
| nf_nat_helper.c | ||
| nf_nat_irc.c | ||
| nf_nat_masquerade.c | ||
| nf_nat_ovs.c | ||
| nf_nat_proto.c | ||
| nf_nat_redirect.c | ||
| nf_nat_sip.c | ||
| nf_nat_tftp.c | ||
| nf_queue.c | ||
| nf_sockopt.c | ||
| nf_synproxy_core.c | ||
| nf_tables_api.c | ||
| nf_tables_core.c | ||
| nf_tables_offload.c | ||
| nf_tables_trace.c | ||
| nfnetlink.c | ||
| nfnetlink_acct.c | ||
| nfnetlink_cthelper.c | ||
| nfnetlink_cttimeout.c | ||
| nfnetlink_hook.c | ||
| nfnetlink_log.c | ||
| nfnetlink_osf.c | ||
| nfnetlink_queue.c | ||
| nft_bitwise.c | ||
| nft_byteorder.c | ||
| nft_chain_filter.c | ||
| nft_chain_nat.c | ||
| nft_chain_route.c | ||
| nft_cmp.c | ||
| nft_compat.c | ||
| nft_connlimit.c | ||
| nft_counter.c | ||
| nft_ct.c | ||
| nft_ct_fast.c | ||
| nft_dup_netdev.c | ||
| nft_dynset.c | ||
| nft_exthdr.c | ||
| nft_fib.c | ||
| nft_fib_inet.c | ||
| nft_fib_netdev.c | ||
| nft_flow_offload.c | ||
| nft_fwd_netdev.c | ||
| nft_hash.c | ||
| nft_immediate.c | ||
| nft_inner.c | ||
| nft_last.c | ||
| nft_limit.c | ||
| nft_log.c | ||
| nft_lookup.c | ||
| nft_masq.c | ||
| nft_meta.c | ||
| nft_nat.c | ||
| nft_numgen.c | ||
| nft_objref.c | ||
| nft_osf.c | ||
| nft_payload.c | ||
| nft_queue.c | ||
| nft_quota.c | ||
| nft_range.c | ||
| nft_redir.c | ||
| nft_reject.c | ||
| nft_reject_inet.c | ||
| nft_reject_netdev.c | ||
| nft_rt.c | ||
| nft_set_bitmap.c | ||
| nft_set_hash.c | ||
| nft_set_pipapo.c | ||
| nft_set_pipapo.h | ||
| nft_set_pipapo_avx2.c | ||
| nft_set_pipapo_avx2.h | ||
| nft_set_rbtree.c | ||
| nft_socket.c | ||
| nft_synproxy.c | ||
| nft_tproxy.c | ||
| nft_tunnel.c | ||
| nft_xfrm.c | ||
| utils.c | ||
| x_tables.c | ||
| xt_addrtype.c | ||
| xt_AUDIT.c | ||
| xt_bpf.c | ||
| xt_cgroup.c | ||
| xt_CHECKSUM.c | ||
| xt_CLASSIFY.c | ||
| xt_cluster.c | ||
| xt_comment.c | ||
| xt_connbytes.c | ||
| xt_connlabel.c | ||
| xt_connlimit.c | ||
| xt_connmark.c | ||
| xt_CONNSECMARK.c | ||
| xt_conntrack.c | ||
| xt_cpu.c | ||
| xt_CT.c | ||
| xt_dccp.c | ||
| xt_devgroup.c | ||
| xt_dscp.c | ||
| xt_DSCP.c | ||
| xt_ecn.c | ||
| xt_esp.c | ||
| xt_hashlimit.c | ||
| xt_helper.c | ||
| xt_hl.c | ||
| xt_HL.c | ||
| xt_HMARK.c | ||
| xt_IDLETIMER.c | ||
| xt_ipcomp.c | ||
| xt_iprange.c | ||
| xt_ipvs.c | ||
| xt_l2tp.c | ||
| xt_LED.c | ||
| xt_length.c | ||
| xt_limit.c | ||
| xt_LOG.c | ||
| xt_mac.c | ||
| xt_mark.c | ||
| xt_MASQUERADE.c | ||
| xt_multiport.c | ||
| xt_nat.c | ||
| xt_NETMAP.c | ||
| xt_nfacct.c | ||
| xt_NFLOG.c | ||
| xt_NFQUEUE.c | ||
| xt_osf.c | ||
| xt_owner.c | ||
| xt_physdev.c | ||
| xt_pkttype.c | ||
| xt_policy.c | ||
| xt_quota.c | ||
| xt_RATEEST.c | ||
| xt_rateest.c | ||
| xt_realm.c | ||
| xt_recent.c | ||
| xt_REDIRECT.c | ||
| xt_repldata.h | ||
| xt_sctp.c | ||
| xt_SECMARK.c | ||
| xt_set.c | ||
| xt_socket.c | ||
| xt_state.c | ||
| xt_statistic.c | ||
| xt_string.c | ||
| xt_TCPMSS.c | ||
| xt_tcpmss.c | ||
| xt_TCPOPTSTRIP.c | ||
| xt_tcpudp.c | ||
| xt_TEE.c | ||
| xt_time.c | ||
| xt_TPROXY.c | ||
| xt_TRACE.c | ||
| xt_u32.c | ||