linux/drivers
Vimlesh Kumar 43b3160cb6 octeon_ep: avoid compiler and IQ/OQ reordering
Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx
variable access to prevent compiler optimization and reordering.
Additionally, ensure IO queue OUT/IN_CNT registers are flushed
by performing a read-back after writing.

The compiler could reorder reads/writes to pkts_pending, last_pkt_count,
etc., causing stale values to be used when calculating packets to process
or register updates to send to hardware. The Octeon hardware requires a
read-back after writing to OUT_CNT/IN_CNT registers to ensure the write
has been flushed through any posted write buffers before the interrupt
resend bit is set. Without this, we have observed cases where the hardware
didn't properly update its internal state.

wmb/rmb only provides ordering guarantees but doesn't prevent the compiler
from performing optimizations like caching in registers, load tearing etc.

Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-3-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2026-03-03 11:34:20 +01:00
..
accel Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
accessibility Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
acpi Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
amba Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
android Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
ata ata: libata-core: fix cancellation of a port deferred qc work 2026-02-24 09:38:55 +09:00
atm Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
auxdisplay Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
base Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
bcma Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
block Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
bluetooth Including fixes from IPsec, Bluetooth and netfilter 2026-02-26 08:00:13 -08:00
bus Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
cache
cdrom Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
cdx Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
char Remove WARN_ALL_UNSEEDED_RANDOM kernel config option 2026-02-23 11:18:48 -08:00
clk Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
clocksource Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
comedi Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
connector Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
counter Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
cpufreq Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
cpuidle Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
crypto Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
cxl Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
dax Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
dca treewide: Replace kmalloc with kmalloc_obj for non-scalar types 2026-02-21 01:02:28 -08:00
devfreq Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
dibs Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
dio Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
dma Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
dma-buf Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
dpll Including fixes from IPsec, Bluetooth and netfilter 2026-02-26 08:00:13 -08:00
edac Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
eisa Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
extcon Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
firewire Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
firmware Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
fpga Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
fsi Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
fwctl Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
gnss Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
gpib Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
gpio Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
gpu Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
greybus Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
hid Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
hsi Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
hte Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
hv Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
hwmon Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
hwspinlock soc: driver updates for 7.0 2026-02-10 20:45:30 -08:00
hwtracing Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
i2c Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
i3c Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
idle
iio Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
infiniband Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
input Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
interconnect Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
iommu Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
ipack Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
irqchip Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
isdn Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
leds Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
macintosh Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
mailbox treewide: Replace kmalloc with kmalloc_obj for non-scalar types 2026-02-21 01:02:28 -08:00
mcb Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
md Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
media media: dvb-core: fix wrong reinitialization of ringbuffer on reopen 2026-02-24 12:39:00 -08:00
memory Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
memstick Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
message Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
mfd Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
misc Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
mmc Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
most Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
mtd Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
mux Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
net octeon_ep: avoid compiler and IQ/OQ reordering 2026-03-03 11:34:20 +01:00
nfc Including fixes from IPsec, Bluetooth and netfilter 2026-02-26 08:00:13 -08:00
ntb kmalloc_obj treewide refactoring for v7.0-rc1 2026-02-21 11:02:58 -08:00
nubus Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
nvdimm Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
nvme Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
nvmem Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
of Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
opp Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
parisc Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
parport Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
pci Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
pcmcia Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
peci Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
perf Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
phy Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
pinctrl Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
platform Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
pmdomain Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
pnp Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
power Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
powercap Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
pps Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
ps3 Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
ptp Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
pwm Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
rapidio Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
ras Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
regulator Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
remoteproc Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
resctrl Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
reset Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
rpmsg Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
rtc RTC for 7.0 2026-02-22 09:43:11 -08:00
s390 Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
sbus Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
scsi Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
sh Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
siox Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
slimbus Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
soc Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
soundwire Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
spi Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
spmi Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
ssb Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
staging Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
target Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
tc Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
tee Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
thermal Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
thunderbolt Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
tty Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
ufs Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
uio Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
usb Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
vdpa Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
vfio Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
vhost Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
video Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
virt Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
virtio Convert more 'alloc_obj' cases to default GFP_KERNEL arguments 2026-02-21 20:03:00 -08:00
w1 Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
watchdog Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
xen Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses 2026-02-22 08:26:33 -08:00
zorro Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-21 17:09:51 -08:00
Kconfig
Makefile phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY 2026-02-04 20:45:26 +05:30