mirror of
https://github.com/torvalds/linux.git
synced 2026-03-07 23:04:33 +01:00
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
Kconfig option CONFIG_PHY_COMMON_PROPS, which builds
drivers/phy/phy-common-props.c, was intended to be selectable
independently of CONFIG_GENERIC_PHY. Yet it lives in drivers/phy/, which
is entered by the Makefile only if CONFIG_GENERIC_PHY is set.
Allow the Makefile to enter one level deeper, but stop at drivers/phy/
if CONFIG_GENERIC_PHY is unselected (i.e. do not enter vendor folders).
The other stuff from drivers/phy/Makefile except for CONFIG_PHY_COMMON_PROPS,
like CONFIG_PHY_NXP_PTN3222, all depends on CONFIG_GENERIC_PHY.
Fixes: e7556b59ba ("phy: add phy_get_rx_polarity() and phy_get_tx_polarity()")
Closes: https://lore.kernel.org/lkml/43ea0202-891d-4582-980b-5cb557b41114@linux.ibm.com/
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Debugged-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://patch.msgid.link/20260123110600.3118561-1-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
parent
8bb92fd7a0
commit
3ddcd24b4d
2 changed files with 2 additions and 2 deletions
|
|
@ -10,7 +10,7 @@ obj-y += cache/
|
|||
obj-y += irqchip/
|
||||
obj-y += bus/
|
||||
|
||||
obj-$(CONFIG_GENERIC_PHY) += phy/
|
||||
obj-y += phy/
|
||||
|
||||
# GPIO must come after pinctrl as gpios may need to mux pins etc
|
||||
obj-$(CONFIG_PINCTRL) += pinctrl/
|
||||
|
|
|
|||
|
|
@ -17,7 +17,7 @@ obj-$(CONFIG_USB_LGM_PHY) += phy-lgm-usb.o
|
|||
obj-$(CONFIG_PHY_AIROHA_PCIE) += phy-airoha-pcie.o
|
||||
obj-$(CONFIG_PHY_NXP_PTN3222) += phy-nxp-ptn3222.o
|
||||
obj-$(CONFIG_PHY_SPACEMIT_K1_PCIE) += phy-spacemit-k1-pcie.o
|
||||
obj-y += allwinner/ \
|
||||
obj-$(CONFIG_GENERIC_PHY) += allwinner/ \
|
||||
amlogic/ \
|
||||
apple/ \
|
||||
broadcom/ \
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue