This initial version supports the NPU as shipped in the RK3588 SoC and
described in the first part of its TRM, in Chapter 36.
This NPU contains 3 independent cores that the driver can submit jobs
to.
This commit adds just hardware initialization and power management.
v2:
- Split cores and IOMMUs as independent devices (Sebastian Reichel)
- Add some documentation (Jeffrey Hugo)
- Be more explicit in the Kconfig documentation (Jeffrey Hugo)
- Remove resets, as these haven't been found useful so far (Zenghui Yu)
- Repack structs (Jeffrey Hugo)
- Use DEFINE_DRM_ACCEL_FOPS (Jeffrey Hugo)
- Use devm_drm_dev_alloc (Jeffrey Hugo)
- Use probe log helper (Jeffrey Hugo)
- Introduce UABI header in a later patch (Jeffrey Hugo)
v3:
- Adapt to a split of the register block in the DT bindings (Nicolas
Frattaroli)
- Move registers header to its own commit (Thomas Zimmermann)
- Misc. cleanups (Thomas Zimmermann and Jeff Hugo)
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
- PM improvements (Nicolas Frattaroli)
v4:
- Use bulk clk API (Krzysztof Kozlowski)
v6:
- Remove mention to NVDLA, as the hardware is only incidentally related
(Kever Yang)
- Use calloc instead of GFP_ZERO (Jeff Hugo)
- Explicitly include linux/container_of.h (Jeff Hugo)
- pclk and npu clocks are now needed by all cores (Rob Herring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Kconfig: fix depends to be more explicit about Rockchip, and remove
superfluous selects (Robin Murphy)
- Use reset lines to reset the cores (Robin Murphy)
- Reference count the module
- Set dma_set_max_seg_size
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Remove notion of top core (Robin Murphy)
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-2-77ebd484941e@tomeuvizoso.net
A XML file was generated with the data from the TRM, and then this
header was generated from it.
The canonical location for the XML file is the Mesa3D repository.
v3:
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
v8:
- Remove full MIT license blob, to match other files with the same
licensing arrangement in the kernel
Reviewed-by: Robert Foss <rfoss@kernel.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-1-77ebd484941e@tomeuvizoso.net
Qualcomm is changing open source email address policy.
LKML and other busy mailing lists use the oss.qualcomm.com domain.
Signed-off-by: Carl Vanderlip <carl.vanderlip@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721220811.962509-1-carl.vanderlip@oss.qualcomm.com
We would like to report them on gpu errors.
We choose to save the info on panthor_group_create rather than on
panthor_open because, when the two differ, we are more interested in the
task that created the group.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250718063816.1452123-3-olvaffe@gmail.com
It allows us to get rid of manual try_module_get / module_put.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250718063816.1452123-2-olvaffe@gmail.com
Add 50ms disable delay for NV116WHM-N49, NV122WUM-N41, and MNC207QS1-1
to satisfy T9+T10 timing. Add 50ms disable delay for MNE007JA1-2
as well, since MNE007JA1-2 copies the timing of MNC207QS1-1.
Specifically, it should be noted that the MNE007JA1-2 panel was added
by someone who did not have the panel documentation, so they simply
copied the timing from the MNC207QS1-1 panel. Adding an extra 50 ms
of delay should be safe.
Fixes: 0547692ac1 ("drm/panel-edp: Add several generic edp panels")
Fixes: 50625eab39 ("drm/edp-panel: Add panel used by T14s Gen6 Snapdragon")
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250723072513.2880369-1-yelangyan@huaqin.corp-partner.google.com
The bridge used in drm_bridge_connector_init() for CEC init does not
correctly point to the required HDMI CEC bridge, which can lead to
errors during CEC initialization.
Fixes: 65a2575a68 ("drm/display: bridge-connector: hook in CEC notifier support")
Fixes: a74288c8de ("drm/display: bridge-connector: handle CEC adapters")
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Closes: http://lore.kernel.org/r/20250718164156.194702d9@booty/
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250719-fix-cec-bridges-v1-1-a60b1333c87d@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The bridge returned by drm_bridge_get_prev_bridge() is refcounted. Put it
when done.
select_bus_fmt_recursive() has several return points, and ensuring
drm_bridge_put() is always called in the right place would be error-prone
(especially with future changes to the select_bus_fmt_recursive() code) and
make code uglier. Instead use a scope-based free, which is future-proof and
a lot cleaner.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250709-drm-bridge-alloc-getput-drm_bridge_get_prev_bridge-v1-2-34ba6f395aaa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The device is managed so pci_free_irq_vectors() is called automatically
no need to do it manually.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/aHs8QAfUlFeNp7qL@pc
Enhance DRM_IOCTL_AMDXDNA_CREATE_BO to accept user space allocated
buffer pointer. The buffer pages will be pinned in memory. Unless
the CAP_IPC_LOCK is enabled for the application process, the total
pinned memory can not beyond rlimit_memlock.
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250716164414.112091-1-lizhi.hou@amd.com
Many functions get a drm_bridge pointer, only use it in the function body
(or a smaller scope such as a loop body), and don't store it. In these
cases they always need to drm_bridge_put() it before returning (or exiting
the scope).
Some of those functions have complex code paths with multiple return points
or loop break/continue. This makes adding drm_bridge_put() in the right
places tricky, ugly and error prone in case of future code changes.
Others use the bridge pointer in the return statement and would need to
split the return line to fit the drm_bridge_put, which is a bit annoying:
-return some_thing(bridge);
+ret = some_thing(bridge);
+drm_bridge_put(bridge);
+return ret;
To make it easier for all of them to put the bridge reference correctly
without complicating code, define a scope-based cleanup action to be used
with __free().
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250708-drm-bridge-alloc-getput-drm_bridge_chain_get_first_bridge-v9-1-db1ba3df7f58@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This breaks on PREEMPT_RT, and should be unneeded since
lockdep can track irq disabled status itself.
Link: https://lore.kernel.org/r/20250715165919.33754-1-dev@lankhorst.se
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
For the MNB601LS1-4 panel, the T9+T10 timing does not meet the
requirements of the specification, so disable is set to 100ms.
Fixes: 9d8e91439f ("drm/panel-edp: Add CSW MNB601LS1-4")
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250721061627.3816612-1-yelangyan@huaqin.corp-partner.google.com
With the Opaque<T>, the expectations are that Rust should not
make any assumptions on the layout or invariants of the wrapped
C types. That runs rather counter to ioctl arguments, which must
adhere to certain data-layout constraints. By using Opaque<T>,
ioctl handlers are forced to use unsafe code where none is actually
needed. This adds needless complexity and maintenance overhead,
brining no safety benefits.
Drop the use of Opaque for ioctl arguments as that is not the best
fit here.
Signed-off-by: Beata Michalska <beata.michalska@arm.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250626162313.2755584-1-beata.michalska@arm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
When bailing out due to group_priority_permit() failure, the queue_args
need to be freed. Fix it by rearranging the function to use the
goto-on-error pattern, such that the success case flows straight without
indentation while error cases jump forward to cleanup.
Cc: stable@vger.kernel.org
Fixes: 5f7762042f ("drm/panthor: Restrict high priorities on group_create")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241113-panthor-fix-gcq-bailout-v1-1-654307254d68@google.com
Currently the job free work item will lock sched->job_list_lock first time
to see if there are any jobs, free a single job, and then lock again to
decide whether to re-queue itself if there are more finished jobs.
Since drm_sched_get_finished_job() already looks at the second job in the
queue we can simply add the signaled check and have it return the presence
of more jobs to be freed to the caller. That way the work item does not
have to lock the list again and repeat the signaled check.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250716085117.56864-1-tvrtko.ursulin@igalia.com
The drm_gem ioctls were documented in internal file drm_gem.c
instead of uapi header drm.h. Move them there and change to
appropriate kerneldoc formatting.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250717143556.857893-3-David.Francis@amd.com
CRIU restore of drm buffer objects requires the ability to create
or import a buffer object with a specific gem handle.
Add new drm ioctl DRM_IOCTL_GEM_CHANGE_HANDLE, which takes
the gem handle of an object and moves that object to a
specified new gem handle.
This ioctl needs to call drm_prime_remove_buf_handle,
but that function acquires the prime lock, which the ioctl
needs to hold for other purposes.
Make drm_prime_remove_buf_handle not acquire the prime lock,
and change its other caller to reflect this.
The rest of the kernel patches required to enable CRIU can be
found at
https://lore.kernel.org/dri-devel/20250617194536.538681-1-David.Francis@amd.com/
v2 - Move documentation to UAPI headers
v3 - Always return 0 on success
Signed-off-by: David Francis <David.Francis@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250717143556.857893-2-David.Francis@amd.com
It's not obvious off-hand which CRTCs will get a page-flip event
when using this flag in an atomic commit, because it's all
implicitly implied based on the contents of the atomic commit.
Document requirements for using this flag and how to request an
event for a CRTC.
Note, because prepare_signaling() runs right after
drm_atomic_set_property() calls, page-flip events are not delivered
for CRTCs pulled in later by DRM core (e.g. on modeset by
drm_atomic_helper_check_modeset()) or the driver (e.g. other CRTCs
sharing a DP-MST connector).
v2: fix cut off sentence in commit message (Pekka)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simona Vetter <simona@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: David Turner <david.turner@raspberrypi.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Link: https://lore.kernel.org/r/20250501112945.6448-1-contact@emersion.fr
The GL extension KHR_robustness uses the number of global and per-context
GPU resets to learn about graphics resets that affect a GL context. This
commit introduces a new V3D parameter to retrieve the number of GPU resets
triggered by jobs submitted through a file descriptor.
To retrieve this information, user-space must use DRM_V3D_PARAM_CONTEXT_RESET_COUNTER.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://lore.kernel.org/r/20250711-v3d-reset-counter-v1-2-1ac73e9fca2d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The GL extension KHR_robustness uses the number of global and per-context
GPU resets to learn about graphics resets that affect a GL context. This
commit introduces a new V3D parameter to retrieve the global number of
GPU resets that have happened since the driver was probed.
To retrieve this information, user-space must use DRM_V3D_PARAM_GLOBAL_RESET_COUNTER.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://lore.kernel.org/r/20250711-v3d-reset-counter-v1-1-1ac73e9fca2d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The "skip reset" test waits for the timeout handler to run for the
duration of 2 * MOCK_TIMEOUT, and because the mock scheduler opted to
remove the "skip reset" flag once it fires, this gives opportunity for the
timeout handler to run twice. Second time the job will be removed from the
mock scheduler job list and the drm_mock_sched_advance() call in the test
will fail.
Fix it by making the "don't reset" flag persist for the lifetime of the
job and add a new flag to verify that the code path had executed as
expected.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 1472e7549f ("drm/sched: Add new test for DRM_GPU_SCHED_STAT_NO_HANG")
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250716084817.56797-1-tvrtko.ursulin@igalia.com
If kasprintf() fails, some mutex still need to be released to avoid locking
issue, as already done in all other error handling path.
Fixes: c03ea34cbf ("drm/amdgpu: add support of debugfs for mqd information")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/all/366557fa7ca8173fd78c58336986ca56953369b9.1752087753.git.christophe.jaillet@wanadoo.fr/
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that everyone passes along the format info to
drm_helper_mode_fill_fb_struct() we can make this behaviour
mandatory and drop the extra lookup.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-20-ville.syrjala@linux.intel.com
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
Cc: Zack Rusin <zack.rusin@broadcom.com>
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-19-ville.syrjala@linux.intel.com
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
Cc: David Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: virtualization@lists.linux.dev
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-18-ville.syrjala@linux.intel.com
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
For the fbdev case a manual drm_get_format_info() lookup
is needed.
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mikko Perttunen <mperttunen@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-17-ville.syrjala@linux.intel.com
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookups.
For the fbdev case a manual drm_get_format_info() lookup
is needed.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <lumag@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Marijn Suijten <marijn.suijten@somainline.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-16-ville.syrjala@linux.intel.com
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-15-ville.syrjala@linux.intel.com
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
For the fbdev case a manual drm_get_format_info() lookup
is needed.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-14-ville.syrjala@linux.intel.com
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
For the fbdev case a manual drm_get_format_info() lookup
is needed.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-13-ville.syrjala@linux.intel.com
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
For the fbdev case a manual drm_get_format_info() lookup
is needed.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-12-ville.syrjala@linux.intel.com
Plumb the format info from .fb_create() all the way to
drm_helper_mode_fill_fb_struct() to avoid the redundant
lookup.
For the fbdev case a manual drm_get_format_info() lookup
is needed.
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-11-ville.syrjala@linux.intel.com
Pass along the format info from .fb_create() to aliminate the
redundant drm_get_format_info() calls from the afbc code.
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-9-ville.syrjala@linux.intel.com
Pass along the format info from .fb_create() to eliminate the
redundant drm_get_format_info() calls from the gem fb code.
v2: Fix kernel docs (Laurent)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: virtualization@lists.linux.dev
Cc: spice-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-8-ville.syrjala@linux.intel.com
Plumb the format info from .fb_create() all the way to
malidp_verify_afbc_framebuffer_size() to avoid the
redundant lookup.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-7-ville.syrjala@linux.intel.com
Look up the format info already in drm_internal_framebuffer_create()
so that we can later pass it along to .fb_create(). Currently various
drivers are doing additional lookups in their .fb_create()
implementations, and these lookups are rather expensive now (given
how many different pixel formats we have).
v2: Fix commit msg (Thomas)
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-4-ville.syrjala@linux.intel.com
Decouple .get_format_info() from struct drm_mode_fb_cmd2 and just
pass the pixel format+modifier combo in by hand.
We may want to use .get_format_info() outside of the normal
addfb paths where we won't have a struct drm_mode_fb_cmd2, and
creating a temporary one just for this seems silly.
v2: Fix intel_fb_get_format_info() docs (Laurent)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250701090722.13645-2-ville.syrjala@linux.intel.com
