To avoid race condition and avoid UAF cases, implement kref
based queues and protect the below operations using xa lock
a. Getting a queue from xarray
b. Increment/Decrement it's refcount
Every time some one want to access a queue, always get via
amdgpu_userq_get to make sure we have locks in place and get
the object if active.
A userqueue is destroyed on the last refcount is dropped which
typically would be via IOCTL or during fini.
v2: Add the missing drop in one the condition in the signal ioclt [Alex]
v3: remove the queue from the xarray first in the free queue ioctl path
[Christian]
- Pass queue to the amdgpu_userq_put directly.
- make amdgpu_userq_put xa_lock free since we are doing put for each get
only and final put is done via destroy and we remove the queue from xa
with lock.
- use userq_put in fini too so cleanup is done fully.
v4: Use xa_erase directly rather than doing load and erase in free
ioctl. Also remove some of the error logs which could be exploited
by the user to flood the logs [Christian]
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4952189b284d4d847f92636bb42dd747747129c0)
Cc: <stable@vger.kernel.org> # 048c1c4e51: drm/amdgpu/userq: Consolidate wait ioctl exit path
Cc: <stable@vger.kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Add validation to ensure user queue sizes meet hardware requirements:
- Size must be a power of two for efficient ring buffer wrapping
- Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations
This prevents invalid configurations that could lead to GPU faults or
unexpected behavior.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In error scenarios (e.g., malformed commands), user queue fences may never
be signaled, causing processes to wait indefinitely. To address this while
preserving the requirement of infinite fence waits, implement an independent
timeout detection mechanism:
1. Initialize a hang detect work when creating a user queue (one-time setup)
2. Start the work with queue-type-specific timeout (gfx/compute/sdma) when
the last fence is created via amdgpu_userq_signal_ioctl (per-fence timing)
3. Trigger queue reset logic if the timer expires before the fence is signaled
v2: make timeout per queue type (adev->gfx_timeout vs adev->compute_timeout vs adev->sdma_timeout) to be consistent with kernel queues. (Alex)
v3: The timeout detection must be independent from the fence, e.g. you don't wait for a timeout on the fence
but rather have the timeout start as soon as the fence is initialized. (Christian)
v4: replace the timer with the `hang_detect_work` delayed work.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These IOCTLs shouldn't be called when userqs are not
enabled. Make sure they are enabled before executing
the IOCTLs.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should not be used indiviually, use amdgpu_bo_gpu_offset
with bo reserved.
v3 - unpin bo in queue destroy (Christian)
v2 - pin bo so that offset returned won't change after unlock (Christian)
Signed-off-by: Saleemkhan Jamadar <saleemkhan083@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename since it is an xarray of userq pointers
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove userq manager from function signatures. Get the associated
manager from userq itself.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A userq is associated with its queue manager. Use that and make
the userqueue interfaces to operate on queue.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change gmc macro AMDGPU_GMC_HOLE_START/END/MASK to 57bit if vm root
level is PDB3 for 5-level page tables.
The macro access adev without passing adev as parameter is to minimize
the code change to support 57bit, then we have to add adev variable in
several places to use the macro.
Because adev definition is not available in all amdgpu c files which
include amdgpu_gmc.h, change inline function amdgpu_gmc_sign_extend to
macro.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c: amdgpu_reset.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=26930
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure the bo is valid before using it.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds robust reset handling for user queues (userq) to improve
recovery from queue failures. The key components include:
1. Queue detection and reset logic:
- amdgpu_userq_detect_and_reset_queues() identifies failed queues
- Per-IP detect_and_reset callbacks for targeted recovery
- Falls back to full GPU reset when needed
2. Reset infrastructure:
- Adds userq_reset_work workqueue for async reset handling
- Implements pre/post reset handlers for queue state management
- Integrates with existing GPU reset framework
3. Error handling improvements:
- Enhanced state tracking with HUNG state
- Automatic reset triggering on critical failures
- VRAM loss handling during recovery
4. Integration points:
- Added to device init/reset paths
- Called during queue destroy, suspend, and isolation events
- Handles both individual queue and full GPU resets
The reset functionality works with both gfx/compute and sdma queues,
providing better resilience against queue failures while minimizing
disruption to unaffected queues.
v2: add detection and reset calls when preemption/unmaped fails.
add a per device userq counter for each user queue type.(Alex)
v3: make sure we hold the adev->userq_mutex when we call amdgpu_userq_detect_and_reset_queues. (Alex)
warn if the adev->userq_mutex is not held.
v4: make sure we have all of the uqm->userq_mutex held.
warn if the uqm->userq_mutex is not held.
v5: Use array for user queue type counters.(Alex)
all of the uqm->userq_mutex need to be held when calling detect and reset. (Alex)
v6: fix lock dep warning in amdgpu_userq_fence_dence_driver_process
v7: add the queue types in an array and use a loop in amdgpu_userq_detect_and_reset_queues (Lijo)
v8: remove atomic_set(&userq_mgr->userq_count[i], 0).
it should already be 0 since we kzalloc the structure (Alex)
v9: For consistency with kernel queues, We may want something like:
amdgpu_userq_is_reset_type_supported (Alex)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-redundant explicit call to
pm_runtime_mark_last_busy().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit refactors the AMDGPU userqueue management subsystem to replace
IDR (ID Allocation) with XArray for improved performance, scalability, and
maintainability. The changes address several issues with the previous IDR
implementation and provide better locking semantics.
Key changes:
1. **Global XArray Introduction**:
- Added `userq_doorbell_xa` to `struct amdgpu_device` for global queue tracking
- Uses doorbell_index as key for efficient global lookup
- Replaces the previous `userq_mgr_list` linked list approach
2. **Per-process XArray Conversion**:
- Replaced `userq_idr` with `userq_mgr_xa` in `struct amdgpu_userq_mgr`
- Maintains per-process queue tracking with queue_id as key
- Uses XA_FLAGS_ALLOC for automatic ID allocation
3. **Locking Improvements**:
- Removed global `userq_mutex` from `struct amdgpu_device`
- Replaced with fine-grained XArray locking using XArray's internal spinlocks
4. **Runtime Idle Check Optimization**:
- Updated `amdgpu_runtime_idle_check_userq()` to use xa_empty
5. **Queue Management Functions**:
- Converted all IDR operations to equivalent XArray functions:
- `idr_alloc()` → `xa_alloc()`
- `idr_find()` → `xa_load()`
- `idr_remove()` → `xa_erase()`
- `idr_for_each()` → `xa_for_each()`
Benefits:
- **Performance**: XArray provides better scalability for large numbers of queues
- **Memory Efficiency**: Reduced memory overhead compared to IDR
- **Thread Safety**: Improved locking semantics with XArray's internal spinlocks
v2: rename userq_global_xa/userq_xa to userq_doorbell_xa/userq_mgr_xa
Remove xa_lock and use its own lock.
v3: Set queue->userq_mgr = uq_mgr in amdgpu_userq_create()
v4: use xa_store_irq (Christian)
hold the read side of the reset lock while creating/destroying queues and the manager data structure. (Chritian)
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The amdgpu_userq_buffer_va_list_del() function frees "va_cursor" but it
is dereferenced on the next line when we print the debug message. Print
the debug message first and then free it.
Fixes: 2a28f9665d ("drm/amdgpu: track the userq bo va for its obj management")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
userptrs could be changed by the user at any time and
hence while locking all the bos before GPU start processing
validate all the userptr bos.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN and VPE userqs are not yet supported and this code is
not correct. Userspace should provide the correct
doorbell offset with in their doorbell page for the IP.
Adjusting it here will not work as expected as userspace
and the queue itself will have different offsets.
We need to add a INFO IOCTL query to get the offset and
range for each IP within the doorbell page to handle this
properly.
Cc: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If multiple userq IDR are in use and there is an error handling one
at suspend or resume it will be silently discarded.
Switch the suspend/resume() code to use guards and return immediately.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a user unmaps a userq VA, the driver must ensure
the queue has no in-flight jobs. If there is pending work,
the kernel should wait for the attached eviction (bookkeeping)
fence to signal before deleting the mapping.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It requires validating the userq VA whether is mapped before
trying to resume the queue.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keeping waiting the userq fence infinitely until
hang detection, and then suspend the hang queue and
set the fence error.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Track the userq obj for its life time, and reference and
dereference the buffer flag at its creating and destroying
period.
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the userq object virtual address list_add() helpers
for tracking the userq obj va address usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The CI systems are pointing out list corruptions, so we still need to
fix something here.
Keep the asserts, but revert the lock changes for now.
Fixes: 59e4405e9e ("drm/amdgpu: revert to old status lock handling v3")
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It should return an error code if userq VA validation fails.
Fixes: 9e46b8bb05 ("drm/amdgpu: validate userq buffer virtual address and size")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turned out that protecting the status of each bo_va with a
spinlock was just hiding problems instead of solving them.
Revert the whole approach, add a separate stats_lock and lockdep
assertions that the correct reservation lock is held all over the place.
This not only allows for better checks if a state transition is properly
protected by a lock, but also switching back to using list macros to
iterate over the state of lists protected by the dma_resv lock of the
root PD.
v2: re-add missing check
v3: split into two patches
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In S0i3, GFX state is retained, so it's preferrable to
preempt queues rather than unmapping them as the overhead
is lower.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: David Perry <david.perry@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That was actually complete nonsense and not validating the BOs
at all. The code just cleared all VM areas were it couldn't grab the
lock for a BO.
Try to fix this. Only compile tested at the moment.
v2: fix fence slot reservation as well as pointed out by Sunil.
also validate PDs, PTs, per VM BOs and update PDEs
v3: grab the status_lock while working with the done list.
v4: rename functions, add some comments, fix waiting for updates to
complete.
v4: rename amdgpu_vm_lock_done_list(), add some more comments
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch modifies the user queue management to use preempt/restore
operations instead of full map/unmap for queue eviction scenarios where
applicable. The changes include:
1. Introduces new helper functions:
- amdgpu_userqueue_preempt_helper()
- amdgpu_userqueue_restore_helper()
2. Updates queue state management to track PREEMPTED state
3. Modifies eviction handling to use preempt instead of unmap:
- amdgpu_userq_evict_all() now uses preempt_helper
- amdgpu_userq_restore_all() now uses restore_helper
The preempt/restore approach provides better performance during queue
eviction by avoiding the overhead of full queue teardown and setup.
Full map/unmap operations are still used for initial setup/teardown
and system suspend scenarios.
v2: rename amdgpu_userqueue_restore_helper/amdgpu_userqueue_preempt_helper to
amdgpu_userq_restore_helper/amdgpu_userq_preempt_helper for consistency. (Alex)
v3: amdgpu_userq_stop_sched_for_enforce_isolation() and
amdgpu_userq_start_sched_for_enforce_isolation() should use preempt and restore (Alex)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to validate the userq object virtual address to
determine whether it is residented in a valid vm mapping.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before destroying the userq buffer object, it requires validating
the userq HW unmap status and ensuring the userq is unmapped from
hardware. If the user HW unmap failed, then it needs to reset the
queue for reusing.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is no invocation for amdgpu_userq_active().
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will help on validating the userq input args, and
rejecting for the invalid userq request at the IOCTLs
first place.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the format of debugfs print in the mqd. Need to
add a colon so parser can parse it properly.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the doorbell is invalid, be sure to set the r to an error
state so the function returns an error.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The duplicate judgment of wptr_va could be removed to simplify the logic
Signed-off-by: Qiang Liu <liuqiang@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If kasprintf() fails, some mutex still need to be released to avoid locking
issue, as already done in all other error handling path.
Fixes: c03ea34cbf ("drm/amdgpu: add support of debugfs for mqd information")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/all/366557fa7ca8173fd78c58336986ca56953369b9.1752087753.git.christophe.jaillet@wanadoo.fr/
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix undefined reference to amdgpu_mqd_info_fops during
debugfs_create_file if DEBUG_FS=n
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Link: https://lore.kernel.org/r/20250708101551.68033-1-sunil.khatri@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Add debugfs support for mqd for each queue of the client.
The address exposed to debugfs could be used to dump
the mqd.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250704075548.1549849-5-sunil.khatri@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
A circular locking dependency was detected between the global
`adev->userq_mutex` and per-file `userq_mgr->userq_mutex` when
creating user queues. The issue occurs because:
1. `amdgpu_userq_suspend()` and `amdgpu_userq_resume` take `adev->userq_mutex` first, then
`userq_mgr->userq_mutex`
2. While `amdgpu_userq_create()` takes them in reverse order
This patch resolves the issue by:
1. Moving the `adev->userq_mutex` lock earlier in `amdgpu_userq_create()`
to cover the `amdgpu_userq_ensure_ev_fence()` call
2. Releasing it after we're done with both queue creation and the
scheduling halt check
v2: remove unused adev->userq_mutex lock (Prike)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This resolves a deadlock between user queue management and GPU reset
paths by enforcing consistent lock ordering.
The deadlock occurred when:
1. Process exit path (amdgpu_userq_mgr_fini) would:
- Take uqm->userq_mutex
- Then try to take adev->userq_mutex for list operations
2. GPU reset path (amdgpu_userq_pre_reset) would:
- Take adev->userq_mutex first (for list traversal)
- Then take uqm->userq_mutex
The solution establishes a strict top-down locking order:
1. Always take adev->userq_mutex before any uqm->userq_mutex
2. Maintain this order consistently across all code paths
Changes made:
- Reordered locking in amdgpu_userq_mgr_fini() to take device lock first
- Kept existing proper order in amdgpu_userq_pre_reset()
- Simplified the fini flow by removing redundant operations
This prevents circular dependencies while maintaining thread safety
during both normal operation and GPU reset scenarios.
Fixes: 4ce60dbada ("drm/amdgpu: store userq_managers in a list in adev")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Arvind Yadav <Arvind.Yadav@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update the functions in amdgpu_userqueues.c from
DRM_DBG_DRIVER to drm_dbg_driver so multi gpu instance
can be logged in.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
change the DRM_ERROR and drm_err to drm_file_err
to add process name and pid to the logging.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
