The "ocelot" and "seville" tagging protocols populate a bit mask for the
TX ports, so we can use dsa_xmit_port_mask() to centralize the decision
of how to set that field.
This protocol used BIT_ULL() rather than simple BIT() to silence Smatch,
as explained in commit 1f778d500d ("net: mscc: ocelot: avoid type
promotion when calling ocelot_ifh_set_dest"). I would expect that this
tool no longer complains now, when the BIT(dp->index) is hidden inside
the dsa_xmit_port_mask() function, the return value of which is promoted
to u64.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "gsw1xx" tagging protocol populates a bit mask for the TX ports, so
we can use dsa_xmit_port_mask() to centralize the decision of how to set
that field.
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "mtk" tagging protocol populates a bit mask for the TX ports, so we
can use dsa_xmit_port_mask() to centralize the decision of how to set
that field.
Cc: Chester A. Unal" <chester.a.unal@arinc9.com>
Cc: Daniel Golle <daniel@makrotopia.org>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "ksz8795", "ksz9893", "ksz9477" and "lan937x" tagging protocols
populate a bit mask for the TX ports.
Unlike the others, "ksz9477" also accelerates HSR packet duplication.
Make the HSR duplication logic available generically to all 4 taggers by
using the dsa_xmit_port_mask() function to set the TX port mask.
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "hellcreek" tagging protocol populates a bit mask for the TX ports,
so we can use dsa_xmit_port_mask() to centralize the decision of how to
set that field.
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "gswip" tagging protocol populates a bit mask for the TX ports, so
we can use dsa_xmit_port_mask() to centralize the decision of how to set
that field.
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "brcm" and "brcm-prepend" tagging protocols populate a bit mask for
the TX ports, so we can use dsa_xmit_port_mask() to centralize the
decision of how to set that field. The port mask is written u8 by u8,
first the high octet and then the low octet.
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Many tagging protocols deal with the transmit port mask being a bit
mask, and set it to BIT(dp->index). Not a big deal.
Also, some tagging protocols are written for switches which support HSR
offload (including packet duplication offload), there we see a walk
using dsa_hsr_foreach_port() to find the other port in the same switch
that's member of the HSR, and set that bit in the port mask too.
That isn't sufficiently interesting either, until you come to realize
that there isn't anything special in the second case that switches just
in the first one can't do too.
It just becomes a matter of "is it wise to do it? are sufficient people
using HSR/PRP with generic off-the-shelf switches to justify add an
extra test in the data path?" - the answer to which is probably "it
depends". It isn't _much_ worse to not have HSR offload at all, so as to
make it impractical, esp. with a rich OS like Linux. But the HSR users
are rather specialized in industrial networking.
Anyway, the change acts on the premise that we're going to have support
for this, it should be uniformly implemented for everyone, and that if
we find some sort of balance, we can keep everyone relatively happy.
So I've disabled that logic if CONFIG_HSR isn't enabled, and I've tilted
the branch predictor to say it's unlikely we're transmitting through a
port with this capability currently active. On branch miss, we're still
going to save the transmission of one packet, so there's some remaining
benefit there too. I don't _think_ we need to jump to static keys yet.
The helper returns a 32-bit zero-based unsigned number, that callers
have to transpose using FIELD_PREP(). It is not the first time we assume
DSA switches won't be larger than 32 ports - dsa_user_ports() has that
assumption baked into it too.
One last development note about why pass the "skb" argument when this
isn't used. Looking at the compiled code on arm64, which is identical
both with and without it, the answer is "why not?" - who knows what
other features dependent on the skb may be handled in the future.
Link: https://lore.kernel.org/netdev/20251126093240.2853294-4-mmyangfl@gmail.com/
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>
Cc: Chester A. Unal" <chester.a.unal@arinc9.com>
Cc: "Clément Léger" <clement.leger@bootlin.com>
Cc: Daniel Golle <daniel@makrotopia.org>
Cc: David Yang <mmyangfl@gmail.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: UNGLinuxDriver@microchip.com
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251127120902.292555-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
net: broadcom: migrate to .get_rx_ring_count() ethtool callback
This series migrates Broadcom ethernet drivers to use the new
.get_rx_ring_count() ethtool callback introduced in commit 84eaf4359c
("net: ethtool: add get_rx_ring_count callback to optimize RX ring
queries").
This change simplifies the .get_rxnfc() implementation by
extracting the ETHTOOL_GRXRINGS case handling into a dedicated callback,
making the code cleaner and aligning these drivers with the updated
ethtool API.
The series covers two Broadcom drivers: bnxt and bcmgenet. Each patch
removes the ETHTOOL_GRXRINGS case from the driver's .get_rxnfc() switch
statement and implements the new .get_rx_ring_count() callback that
returns the number of RX rings.
====================
Link: https://patch.msgid.link/20251127-grxrings_broadcom-v1-0-b0b182864950@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns bcmgenet with the
new ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251127-grxrings_broadcom-v1-2-b0b182864950@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns bnxt with the new
ethtool API for querying RX ring parameters.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251127-grxrings_broadcom-v1-1-b0b182864950@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Donald Hunter says:
====================
tools: ynl: add schema checking
Add schema checking and yaml linting for the YNL specs.
Patch 1 adds a schema_check make target using a pyynl --validate option
Patch 2 adds a lint make target using yamllint
Patches 3,4 fix issues reported by make -C tools/net/ynl lint schema_check
====================
Link: https://patch.msgid.link/20251127123502.89142-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix two schema check errors that have lurked since the attribute name
validation was made more strict:
not ok 2 conntrack.yaml schema validation
'labels mask' does not match '^[0-9a-z-]+$'
not ok 13 nftables.yaml schema validation
'set id' does not match '^[0-9a-z-]+$'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-5-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix warning reported by yamllint:
../../../Documentation/netlink/specs/ethtool.yaml
1272:21 warning truthy value should be one of [false, true] (truthy)
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a lint target to run yamllint on the YNL specs.
make -C tools/net/ynl lint
make: Entering directory '/home/donaldh/net-next/tools/net/ynl'
yamllint ../../../Documentation/netlink/specs/*.yaml
../../../Documentation/netlink/specs/ethtool.yaml
1272:21 warning truthy value should be one of [false, true] (truthy)
make: Leaving directory '/home/donaldh/net-next/tools/net/ynl'
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a --validate flag to pyynl for explicit schema check with error
reporting and add a schema_check make target to check all YNL specs.
make -C tools/net/ynl schema_check
make: Entering directory '/home/donaldh/net-next/tools/net/ynl'
ok 1 binder.yaml schema validation
not ok 2 conntrack.yaml schema validation
'labels mask' does not match '^[0-9a-z-]+$'
Failed validating 'pattern' in schema['properties']['attribute-sets']['items']['properties']['attributes']['items']['properties']['name']:
{'type': 'string', 'pattern': '^[0-9a-z-]+$'}
On instance['attribute-sets'][14]['attributes'][22]['name']:
'labels mask'
ok 3 devlink.yaml schema validation
[...]
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251127123502.89142-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- mt76:
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- rtw89
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- rtl8xxxu: 40 MHz connection fixes/support
- brcmfmac: Acer A1 840 tablet quirk
-----BEGIN PGP SIGNATURE-----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=7c9f
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-11-27' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Apart from the usual small things just driver updates:
- mt76:
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- rtw89
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- rtl8xxxu: 40 MHz connection fixes/support
- brcmfmac: Acer A1 840 tablet quirk
* tag 'wireless-next-2025-11-27' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (152 commits)
wifi: mac80211: allow sharing identical chanctx for S1G interfaces
wifi: nl80211: vendor-cmd: intel: fix a blank kernel-doc line warning
wifi: cfg80211: include s1g_primary_2mhz when comparing chandefs
wifi: cfg80211: include s1g_primary_2mhz when sending chandef
wifi: ieee80211: correct FILS status codes
mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add()
wifi: mt76: mt792x: fix wifi init fail by setting MCU_RUNNING after CLC load
wifi: mt76: Strip whitespace from build ddate
wifi: mt76: mt7996: Add missing locking in mt7996_mac_sta_rc_work()
wifi: mt76: mt7996: skip ieee80211_iter_keys() on scanning link remove
wifi: mt76: mt7996: skip deflink accounting for offchannel links
wifi: mt76: Move mt76_abort_scan out of mt76_reset_device()
wifi: mt76: mt7996: move mt7996_update_beacons under mt76 mutex
wifi: mt76: mt7996: grab mt76 mutex in mt7996_mac_sta_event()
wifi: mt76: mt7925: ensure the 6GHz A-MPDU density cap from the hardware.
wifi: mt76: mt7996: fix EMI rings for RRO
wifi: mt76: mt7996: fix using wrong phy to start in mt7996_mac_restart()
wifi: mt76: mt7996: fix MLO set key and group key issues
wifi: mt76: mt7996: fix MLD group index assignment
wifi: mt76: mt7996: use correct link_id when filling TXD and TXP
...
====================
Link: https://patch.msgid.link/20251127103806.17776-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel message
catalog" from 2008 [1] which never made it upstream.
The macro was added to s390 code to allow for an out-of-tree patch which
used this to generate unique message ids. Also this out-of-tree patch
doesn't exist anymore.
The pattern of how the KMSG_COMPONENT macro is used can also be found at
some non s390 specific code, for whatever reasons. Besides adding an
indirection it is unused.
Remove the macro in order to get rid of a pointless indirection. Replace
all users with the string it defines. In all cases this leads to a simple
replacement like this:
- #define KMSG_COMPONENT "af_iucv"
- #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+ #define pr_fmt(fmt) "af_iucv: " fmt
[1] https://lwn.net/Articles/292650/
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20251126140705.1944278-1-hca@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: Updates for net-next (part)
This series includes an enhnacement to the priority TX counters,
an enhancement to a PHY module error extack message, cleanup of
unneeded MSIX logic in bnxt_ulp.c, adding CQ dump during TX timeout,
LRO/HW_GRO performance improvement by enabling Relaxed Ordering,
and improved SRIOV admin link state support.
====================
Link: https://patch.msgid.link/20251126215648.1885936-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The firmware can now cache the virtual link admin state (auto/on/off) of
all VFs and as such, the PF driver no longer has to intercept the VF
driver's port_phy_qcfg() call and then provide the link admin state.
If the FW does not have this capability, fall back to the existing
interception method.
The initial default link admin state (auto) is also set initially when
the VFs are created.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com>
Signed-off-by: Rob Miller <rmiller@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With End-of-Packet padding (EOP) set, the chip will disable Relaxed
Ordering (RO) of TPA data packets. A TPA segment with EOP set will be
padded to the next cache boundary and can potentially overwrite the
beginning bytes of the next TPA segment when RO is enabled on 5760X.
To prevent that, the chip disables RO for TPA when EOP is set.
To take advantge of RO and higher performance, do not set EOP on
5760X chips when TPA is enabled. Define a proper RX_BD_FLAGS_AGG_EOP
constant to make it clear that we are setting EOP.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MSIX is always requested when the RoCE driver calls bnxt_register_dev().
We already check bnxt_ulp_registered(), so checking the flag is
redundant. It was a left-over flag after converting to auxbus, so
remove it.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rturn early with -EOPNOTSUPP and an extack message if the PHY type is
BaseT since module status is not available for BaseT.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Gautam R A <gautam-r.a@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The priority packet and byte counters in ethtool -S are returned by
the driver based on the pri2cos mapping. The assumption is that each
priority is mapped to one and only one hardware CoS queue. In a
special RoCE configuration, the FW uses combined CoS queue 0 and CoS
queue 1 for the priority mapped to CoS queue 0. In this special
case, we need to add the CoS queue 0 and CoS queue 1 counters for
the priority packet and byte counters.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251126215648.1885936-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-11-25 (ice, idpf, iavf, ixgbe, ixgbevf, e1000e)
Natalia cleans up ixgbevf_q_vector struct removing an unused field.
Emil converts vport state tracking from enum to bitmap and removes
unneeded states for idpf.
Tony removes an unneeded check from e1000e.
Alok Tiwari removes an unnecessary second call to
ixgbe_non_sfp_link_config() and adjusts the checked member, in idpf, to
reflect the member that is later used. He also fixes various typos and
messages for better clarity misc Intel drivers.
====================
Link: https://patch.msgid.link/20251125223632.1857532-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current dev_warn messages for too many VLAN changes are confusing
and one place incorrectly references "add" instead of "delete" VLANs
due to copy-paste errors.
- Use dev_info instead of dev_warn to lower the log level.
- Rephrase the message to: "virtchnl: Too many VLAN [add|delete]
([v1|v2]) requests; splitting into multiple messages to PF\n".
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-12-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a typo in the ice_fdir_has_frag() kernel-doc comment ("is" -> "if")
- Correct the NVM erase error message format string from "0x02%x" to
"0x%02x" so the module value is printed correctly.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The error messages in idpf_rx_desc_alloc_all() used the group index i
when reporting memory allocation failures for individual Rx and Rx buffer
queues. This is incorrect.
Update the messages to use the correct queue index j and include the
queue group index i for clearer identification of the affected Rx and Rx
buffer queues.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-10-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idpf_compl_queue uses a union for comp, comp_4b, and desc_ring. The
release path should check complq->desc_ring to determine whether the DMA
descriptor ring is allocated. The current check against comp works but is
leftover from a previous commit and is misleading in this context.
Switching the check to desc_ring improves readability and more directly
reflects the intended meaning, since desc_ring is the field representing
the allocated DMA-backed descriptor ring.
No functional change.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-9-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ixgbe_non_sfp_link_config() is called twice in ixgbe_open()
once to assign its return value to err and again in the
conditional check. This patch uses the stored err value
instead of calling the function a second time. This avoids
redundant work and ensures consistent error reporting.
Also fix a small typo in the ixgbe_remove() comment:
"The could be caused" -> "This could be caused".
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-8-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert vport state to a bitmap and remove the DOWN state which is
redundant in the existing logic. There are no functional changes aside
from the use of bitwise operations when setting and checking the states.
Removed the double underscore to be consistent with the naming of other
bitmaps in the header and renamed current_state to vport_is_up to match
the meaning of the new variable.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Chittim Madhu <madhu.chittim@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-6-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Flex array should be at the end of the structure and use [] syntax
Remove unused fields of ixgbevf_q_vector.
They aren't used since busy poll was moved to core code in commit
508aac6dee ("ixgbevf: get rid of custom busy polling code").
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Natalia Wochtman <natalia.wochtman@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251125223632.1857532-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KMSG_COMPONENT macro is a leftover of the s390 specific "kernel message
catalog" from 2008 [1] which never made it upstream.
The macro was added to s390 code to allow for an out-of-tree patch which
used this to generate unique message ids. Also this out-of-tree doesn't
exist anymore.
The pattern of how the KMSG_COMPONENT is used was partially also used for
non s390 specific code, for whatever reasons.
Remove the macro in order to get rid of a pointless indirection.
[1] https://lwn.net/Articles/292650/
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20251126142242.2124317-1-hca@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the Cavium Thunder NIC VF driver to use the new .get_rx_ring_count
ethtool operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by removing the
switch statement and replacing it with a direct return of the queue
count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251126-gxring_cavium-v1-1-a066c0c9e0c6@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The extra "count >= limit" check in stmmac_rx_zc() is redundant and
has no effect because the value of "count" doesn't change after the
while condition at this point.
However, it can change after "read_again:" label:
while (count < limit) {
...
if (count >= limit)
break;
read_again:
...
/* XSK pool expects RX frame 1:1 mapped to XSK buffer */
if (likely(status & rx_not_ls)) {
xsk_buff_free(buf->xdp);
buf->xdp = NULL;
dirty++;
count++;
goto read_again;
}
...
This patch addresses the same issue previously resolved in stmmac_rx()
by commit fa02de9e75 ("net: stmmac: fix rx budget limit check").
The fix is the same: move the check after the label to ensure that it
bounds the goto loop.
Fixes: bba2556efa ("net: stmmac: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20251126104327.175590-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract MIB constants into the header file to improve code style. This
patch will not change the behavior of the function.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20251126084024.2843851-3-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are hard-to-find unused fields in the MIB table I didn't notice in
the example driver code, causing wrong interpretation of the MIB data.
For some 64-bit attributes, the current (wrong) implementation took the
correct lower 32 bits, but messed up the upper 32 bits, so it would work
accidentally until 32-bit overflows happen. Fix that too.
Fixes: 186623f4aa ("net: dsa: yt921x: Add support for Motorcomm YT921x")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20251126084024.2843851-2-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds DASH support for chip RTL8127AP. Its mac version is
RTL_GIGA_MAC_VER_80. DASH is a standard for remote management of network
device, allowing out-of-band control.
Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
Link: https://patch.msgid.link/20251126055950.2050-1-javen_xu@realsil.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This 0x88C3 is registered to Infineon Technologies Corporate Research ST
and are used by MaxLinear.
Infineon made a spin off called Lantiq.
Lantiq was acquired by Intel
MaxLinear acquired Intels Connected Home division.
The product FAQ from MaxLinear describes it's history from the F24S.
The driver for the gsw1xx is based on Lantiq showing it's similarities.
Ref https://standards-oui.ieee.org/ethertype/eth.txt
Signed-off-by: Peter Enderborg <Peter.Enderborg@axis.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use DEFINE_RAW_FLEX() to avoid a -Wflex-array-member-not-at-end warning.
Remove fixed-size array struct usb_cdc_ncm_dpe16 dpe16[2]; from struct
mbim_tx_hdr, so that flex-array member struct mbim_tx_hdr::ndp16.dpe16[]
ends last in this structure.
Compensate for this by using the DEFINE_RAW_FLEX() helper to declare the
on-stack struct instance that contains struct usb_cdc_ncm_ndp16 as a
member. Adjust the rest of the code, accordingly.
So, with these changes fix the following warning:
drivers/net/wwan/mhi_wwan_mbim.c:81:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tx->dropped_pkt counter is a 64-bit integer that is incremented
directly. On 32-bit architectures, this operation is not atomic and
can lead to read/write tearing if a reader accesses the counter during
the update. This can result in incorrect values being reported for
dropped packets.
To prevent this potential data corruption, wrap the increment
operation with u64_stats_update_begin() and u64_stats_update_end().
This ensures that updates to the 64-bit counter are atomic, even on
32-bit systems, by using a sequence lock.
The u64_stats_sync API requires the writer to have exclusive access,
which is already provided in this context by the network stack's
serialization of the transmit path (net_device_ops::ndo_start_xmit
[1]) for a given queue.
[1]: https://www.kernel.org/doc/Documentation/networking/netdevices.txt
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e20dfbad8a ("net: fix napi_consume_skb() with alien skbs")
added a skb->cpu check to napi_consume_skb(), before the point where
napi_consume_skb() validated skb is not NULL.
Add an explicit check to the early exit condition.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As those following recent changes from Eric know very well
using NAPI skb cache is crucial to achieve good perf, at
least on recent AMD platforms. Make sure bnxt feeds the skb
cache with Tx skbs.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert all the legacy code directly accessing the pp fields in net_iov
to access them through @desc in net_iov.
Signed-off-by: Byungchul Park <byungchul@sk.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
regressions.
Current release - regressions:
- mptcp: initialize rcv_mss before calling tcp_send_active_reset()
- eth: mlx5e: fix validation logic in rate limiting
Previous releases - regressions:
- xsk: avoid data corruption on cq descriptor number
- bluetooth:
- prevent race in socket write iter and sock bind
- fix not generating mackey and ltk when repairing
- can:
- kvaser_usb: fix potential infinite loop in command parsers
- rcar_canfd: fix CAN-FD mode as default
- eth: veth: reduce XDP no_direct return section to fix race
- eth: virtio-net: avoid unnecessary checksum calculation on guest RX
Previous releases - always broken:
- sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()
- bluetooth: mediatek: fix kernel crash when releasing iso interface
- vhost: rewind next_avail_head while discarding descriptors
- eth: r8169: fix RTL8127 hang on suspend/shutdown
- eth: aquantia: add missing descriptor cache invalidation on ATL2
- dsa: microchip: fix resource releases in error path
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0MuR
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and CAN. No known outstanding
regressions.
Current release - regressions:
- mptcp: initialize rcv_mss before calling tcp_send_active_reset()
- eth: mlx5e: fix validation logic in rate limiting
Previous releases - regressions:
- xsk: avoid data corruption on cq descriptor number
- bluetooth:
- prevent race in socket write iter and sock bind
- fix not generating mackey and ltk when repairing
- can:
- kvaser_usb: fix potential infinite loop in command parsers
- rcar_canfd: fix CAN-FD mode as default
- eth:
- veth: reduce XDP no_direct return section to fix race
- virtio-net: avoid unnecessary checksum calculation on guest RX
Previous releases - always broken:
- sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()
- bluetooth: mediatek: fix kernel crash when releasing iso interface
- vhost: rewind next_avail_head while discarding descriptors
- eth:
- r8169: fix RTL8127 hang on suspend/shutdown
- aquantia: add missing descriptor cache invalidation on ATL2
- dsa: microchip: fix resource releases in error path"
* tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in mptcp_do_fastclose().
net: fec: do not register PPS event for PEROUT
net: fec: do not allow enabling PPS and PEROUT simultaneously
net: fec: do not update PEROUT if it is enabled
net: fec: cancel perout_timer when PEROUT is disabled
net: mctp: unconditionally set skb->dev on dst output
net: atlantic: fix fragment overflow handling in RX path
MAINTAINERS: separate VIRTIO NET DRIVER and add netdev
virtio-net: avoid unnecessary checksum calculation on guest RX
eth: fbnic: Fix counter roll-over issue
mptcp: clear scheduled subflows on retransmit
net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing traffic
s390/net: list Aswin Karuvally as maintainer
net: wwan: mhi: Keep modem name match with Foxconn T99W640
vhost: rewind next_avail_head while discarding descriptors
net/sched: em_canid: fix uninit-value in em_canid_match
can: rcar_canfd: Fix CAN-FD mode as default
xsk: avoid data corruption on cq descriptor number
r8169: fix RTL8127 hang on suspend/shutdown
net: sxgbe: fix potential NULL dereference in sxgbe_rx()
...
