Correct spelling as flagged by codespell.
With these changes in place codespell only flags false positives
in net/rds.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250619-rds-minor-v1-2-86d2ee3a98b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct the endianness annotation of port assignments:
A host byte order value (RDS_TCP_PORT) is correctly converted to
network byte order (big endian) using htons. But it is then cast back to
host byte order before assigning to a variable that expects a big endian
value. Address this by dropping the cast.
This is not a bug because, while the endian annotation is changed by
this patch, the assigned value is unchanged.
Also correct the endianness of address assignment.
A host byte order value (INADDR_ANY) is incorrectly assigned as-is to
a variable that expects a big endian value. Address this by converting
the value to network byte order (big endian).
This is not a bug because INADDR_ANY is 0, which is isomorphic
with regards to endian conversions. IOW, while the endian annotation
is changed by this patch, the assigned value is unchanged.
Incorrect endian annotations appear to date back to IPv4-only code added
by commit 70041088e3 ("RDS: Add TCP transport to RDS").
Flagged by Sparse.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20250619-rds-minor-v1-1-86d2ee3a98b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joshua Washington says:
====================
gve: XDP TX and redirect support for DQ RDA
A previous patch series[1] introduced the ability to process XDP buffers
to the DQ RDA queue format. This is a follow-up patch series to
introduce XDP_TX and XDP_REDIRECT support and expose XDP support to the
kernel.
Link: https://git.kernel.org/netdev/net-next/c/e2ac75a8a967 [1]
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for XDP_TX and XDP_REDIRECT for the DQ RDA
queue format. To appropriately support transmission of XDP frames, a
new pending packet type GVE_TX_PENDING_PACKET_DQO_XDP_FRAME is
introduced for completion handling, as there was a previous assumption
that completed packets would be SKBs.
XDP_TX handling completes the basic XDP actions, so the feature is
recorded accordingly. This patch also enables the ndo_xdp_xmit callback
allowing DQ to handle XDP_REDIRECT packets originating from another
interface.
The XDP spinlock is moved to common TX ring fields so that it can be
used in both GQ and DQ. Originally, it was in a section which was
mutually exclusive for GQ and DQ.
In summary, 3 XDP features are exposed for the DQ RDA queue format:
1) NETDEV_XDP_ACT_BASIC
2) NETDEV_XDP_ACT_NDO_XMIT
3) NETDEV_XDP_ACT_REDIRECT
Note that XDP and header-data split are mutually exclusive for the time
being due to lack of multi-buffer XDP support.
This patch does not add support for the DQ QPL format. That is to come
in a future patch series.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch performs various minor DQO TX datapath refactors in
preparation for adding XDP_TX and XDP_REDIRECT support. The following
refactors are performed:
1) gve_tx_fill_pkt_desc_dqo() relies on a SKB pointer to
get whether checksum offloading should be enabled. This won't work
for the XDP case, which does not have a SKB. This patch updates the
method to use a boolean representing whether checksum offloading
should be enabled directly.
2) gve_maybe_stop_dqo() contains some synchronization between the true
TX head and the cached value, a synchronization which is common for
XDP queues and normal netdev queues. However, that method is reserved
for netdev TX queues. To avoid duplicate code, this logic is factored
out into a new method, gve_has_tx_slots_available().
3) gve_tx_update_tail() is added to update the TX tail, a functionality
that will be common between normal TX and XDP TX codepaths.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for XDP DQ support, the gve_xdp_xmit callback needs to
be generalized for all queue formats. This patch renames the GQ-specific
function to gve_xdp_xmit_gqi, and introduces a new gve_xdp_xmit callback
which branches on queue format.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rvu_mbox_init function makes use of error path for
freeing memory which are local to the function in
both success and failure conditions. This is unusual hence
fix it by returning zero on success. With new cn20k code this
is freeing valid memory in success case also.
Fixes: e53ee4acb2 ("octeontx2-af: CN20k basic mbox operations and structures")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ICSSG PRP mode which supports offloading of:
- Packet duplication and PRP trailer insertion
- Packet duplicate discard and PRP trailer removal
Signed-off-by: Himanshu Mittal <h-mittal1@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618175536.430568-1-h-mittal1@ti.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have dentries and the ability to create meaningful symlinks
to them, don't keep a name string in each tracker. Switch the output
format to print "class@address", and drop the name field.
Also, add a kerneldoc header for ref_tracker_dir_init().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-9-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After assigning the inode number to the namespace, use it to create a
unique name for each netns refcount tracker with the ns.inum and
net_cookie values in it, and register a symlink to the debugfs file for
it.
init_net is registered before the ref_tracker dir is created, so add a
late_initcall() to register its files and symlinks.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-8-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the ability for a subsystem to add a user-friendly symlink that
points to a ref_tracker_dir's debugfs file. Add a separate
debugfs_symlinks xarray and use that to track symlinks. The reaper
workqueue job will remove symlinks before their corresponding dentries.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-7-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, there is no convenient way to see the info that the
ref_tracking infrastructure collects. Attempt to create a file in
debugfs when called from ref_tracker_dir_init().
The file is given the name "class@%px", as having the unmodified address
is helpful for debugging. This should be safe since this directory is only
accessible by root
While ref_tracker_dir_init() is generally called from a context where
sleeping is OK, ref_tracker_dir_exit() can be called from anywhere.
Thus, dentry cleanup must be handled asynchronously.
Add a new global xarray that has entries with the ref_tracker_dir
pointer as the index and the corresponding debugfs dentry pointer as the
value. Instead of removing the debugfs dentry, have
ref_tracker_dir_exit() set a mark on the xarray entry and schedule a
workqueue job. The workqueue job then walks the xarray looking for
marked entries, and removes their xarray entries and the debugfs
dentries.
Because of this, the debugfs dentry can outlive the corresponding
ref_tracker_dir. Have ref_tracker_debugfs_show() take extra care to
ensure that it's safe to dereference the dir pointer before using it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-6-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow pr_ostream to also output directly to a seq_file without an
intermediate buffer. The first caller of +ref_tracker_dir_seq_print()
will come in a later patch, so mark that __maybe_unused for now. That
designation will be removed once it is used.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-5-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A later patch in the series will be adding debugfs files for each
ref_tracker that get created in ref_tracker_dir_init(). The format will
be "class@%px". The current "name" string can vary between
ref_tracker_dir objects of the same type, so it's not suitable for this
purpose.
Add a new "class" string to the ref_tracker dir that describes the
the type of object (sans any individual info for that object).
Also, in the i915 driver, gate the creation of debugfs files on whether
the dentry pointer is still set to NULL. CI has shown that the
ref_tracker_dir can be initialized more than once.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-4-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a later patch, we'll be adding a 3rd mechanism for outputting
ref_tracker info via seq_file. Instead of a conditional, have the caller
set a pointer to an output function in struct ostream. As part of this,
the log prefix must be explicitly passed in, as it's too late for the
pr_fmt macro.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-3-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new "ref_tracker" directory in debugfs. Each individual refcount
tracker can register files under there to display info about
currently-held references.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20250618-reftrack-dbgfs-v15-2-24fc37ead144@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
netpoll: Code organization improvements
The netpoll_setup() function has grown complex over time, mixing
different error handling and concerns like carrier waiting, IPv4 address
retrieval, and IPv6 address retrieval all within a single function,
which is huge (127 LoC).
This patch series refactors the netpoll_setup() function to improve code
organization and readability by extracting logical blocks into dedicated
helper functions. netpoll_setup() length is reduced to 72 LoC.
This series breaks down these responsibilities into focused helper
functions.
The changes are purely structural with no functional modifications.
This changes were tested with the netconsole tests and the netpoll
selftest (WIP)[1]
Link: https://lore.kernel.org/20250612-netpoll_test-v1-1-4774fd95933f@debian.org [1]
====================
Link: https://patch.msgid.link/20250618-netpoll_ip_ref-v1-0-c2ac00fe558f@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the IPv6 address retrieval logic from netpoll_setup() into
a dedicated helper function netpoll_take_ipv6() to improve code
organization and readability.
The function handles obtaining the local IPv6 address from the
network device, including proper address type matching between
local and remote addresses (link-local vs global), and includes
appropriate error handling when IPv6 is not supported or no
suitable address is available.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618-netpoll_ip_ref-v1-3-c2ac00fe558f@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the IPv4 address retrieval logic from netpoll_setup() into a
separate netpoll_take_ipv4() function to improve code organization
and readability. This change consolidates the IPv4-specific logic
and error handling into a dedicated function while maintaining
the same functionality.
No functional changes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618-netpoll_ip_ref-v1-2-c2ac00fe558f@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the carrier waiting logic into a dedicated helper function
netpoll_wait_carrier() to improve code readability and reduce
duplication in netpoll_setup().
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618-netpoll_ip_ref-v1-1-c2ac00fe558f@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The input parameter "compressed_bufsize" of smc_buf_get_slot is unused,
remove it.
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618103342.1423913-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a call to dev_dstats_rx_dropped_add() in nsim_queue_free() to
account for the number of packets dropped when purging the skb queue.
This improves the accuracy of RX drop statistics reported by netdevsim.
local_bh_{disable, enable}() protection is used to disable preemption,
which is necessary given that dev_dstats_rx_dropped_add() access
this_cpu_ptr(). See discussion in [1].
Link: https://lore.kernel.org/all/20250617055934.3fd9d322@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-4-19fe0d35e28e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_time_to_recover() does not need the @flag argument.
Its first parameter can be marked const, and of tcp_sock type.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618091246.1260322-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the dev_dstats_rx_dropped_add() helper to allow incrementing
the rx_drops per-CPU statistic by an arbitrary value, rather than just
one. This is useful for drivers or code paths that need to account for
multiple dropped packets at once, such as when dropping entire queues.
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-3-19fe0d35e28e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As discussesd before in [0] proxy entries (which are more configuration
than runtime data) should stay when the link (carrier) goes does down.
This is what happens for regular neighbour entries.
So lets fix this by:
- storing in proxy entries the fact that it was added as NUD_PERMANENT
- not removing NUD_PERMANENT proxy entries when the carrier goes down
(same as how it's done in neigh_flush_dev() for regular neigh entries)
[0]: https://lore.kernel.org/netdev/c584ef7e-6897-01f3-5b80-12b53f7b4bf4@kernel.org/
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250617141334.3724863-1-nico.escande@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the RX side of netdevsim was added, the RX statistics were missing,
making the driver unusable for GenerateTraffic() test framework.
This patch adds proper statistics tracking on RX side, complementing the
TX path.
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-2-19fe0d35e28e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace custom statistics tracking with the kernel's dstats infrastructure
to simplify code and improve consistency with other network drivers.
This change:
- Sets dev->pcpu_stat_type = NETDEV_PCPU_STAT_DSTATS for automatic
automatic allocation and deallocation.
- Removes manual stats fields and their update
- Replaces custom nsim_get_stats64() with dev_get_stats()
- Uses dev_dstats_tx_add() and dev_dstats_tx_dropped() helpers
- Eliminates the need for manual synchronization primitives
The dstats framework provides the same functionality with less code.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250618-netdevsim_stat-v4-1-19fe0d35e28e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow tx_packets and tx_bytes counter in the driver to represent
the packets transmitted post GSO processing.
Currently they are populated as bigger pre-GSO packets and bytes
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Migrate tasklet APIs to the new bottom half workqueue mechanism. It
replaces all occurrences of tasklet usage with the appropriate workqueue
APIs throughout the usbnet driver. This transition ensures compatibility
with the latest design and enhances performance.
Signed-off-by: Jun Miao <jun.miao@intel.com>
Link: https://patch.msgid.link/20250618173923.950510-1-jun.miao@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't populate the const read-only array supported_sizes on the
stack at run time, instead make it static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>>
Link: https://patch.msgid.link/20250618135408.1784120-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel says:
====================
convert lan78xx driver to the PHYLINK
This series converts the lan78xx driver to use the PHYLINK framework,
which enhances PHY and MAC management. The changes also streamline the
driver by removing unused elements and improving link status reporting.
This is the final part of the previously split conversion series:
https://lore.kernel.org/all/20250428130542.3879769-1-o.rempel@pengutronix.de/
Tested on EVB_LAN7850.
====================
Link: https://patch.msgid.link/20250618122602.3156678-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unused members from struct lan78xx_net, including:
driver_priv
suspend_count
mdix_ctrl
These fields are no longer used in the driver and can be safely removed
as part of a cleanup.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-7-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor Energy-Efficient Ethernet (EEE) support in the LAN78xx driver to
fully integrate with the phylink Low Power Idle (LPI) API. This includes:
- Replacing direct calls to `phy_ethtool_get_eee` and `phy_ethtool_set_eee`
with `phylink_ethtool_get_eee` and `phylink_ethtool_set_eee`.
- Implementing `.mac_enable_tx_lpi` and `.mac_disable_tx_lpi` to control
LPI transitions via phylink.
- Configuring `lpi_timer_default` to align with recommended values from
LAN7800 documentation.
- ensure EEE is disabled on controller reset
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-6-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor lan78xx_get_link_ksettings and lan78xx_set_link_ksettings to
use the phylink API (phylink_ethtool_ksettings_get and
phylink_ethtool_ksettings_set) instead of directly interfacing with the
PHY. This change simplifies the code and ensures better integration with
the phylink framework for link management.
Additionally, the explicit calls to usb_autopm_get_interface() and
usb_autopm_put_interface() have been removed. These were originally
needed to manage USB power management during register accesses. However,
lan78xx_mdiobus_read() and lan78xx_mdiobus_write() already handle USB
auto power management internally, ensuring that the interface remains
active when necessary. Since there are no other direct register accesses
in these functions that require explicit power management handling, the
extra calls have become redundant and are no longer needed.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-5-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the custom lan78xx_get_link implementation with the standard
ethtool_op_get_link helper, which uses netif_carrier_ok to reflect
the current link status accurately.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The EVENT_LINK_RESET macro currently triggers deferred work after a PHY
interrupt. Prior to PHYLINK conversion, this work included reconfiguring
the MAC and PHY, effectively performing a 'link reset'.
However, after porting the driver to the PHYLINK framework, the logic
associated with this event now solely handles the acknowledgment of
the PHY interrupt. The MAC and PHY reconfiguration is now managed by
PHYLINK's dedicated callbacks.
To accurately reflect its current, narrowed functionality, rename
EVENT_LINK_RESET to EVENT_PHY_INT_ACK.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the LAN78xx USB Ethernet driver to use the PHYLINK framework for
managing PHY and MAC interactions. This improves consistency with other
network drivers, simplifies pause frame handling, and enables cleaner
suspend/resume support.
Key changes:
- Replace all PHYLIB-based logic with PHYLINK equivalents:
- Replace phy_connect()/phy_disconnect() with phylink_connect_phy()
- Replace phy_start()/phy_stop() with phylink_start()/phylink_stop()
- Replace pauseparam handling with phylink_ethtool_get/set_pauseparam()
- Introduce lan78xx_phylink_setup() to configure PHYLINK
- Add phylink MAC operations:
- lan78xx_mac_config()
- lan78xx_mac_link_up()
- lan78xx_mac_link_down()
- Remove legacy link state handling:
- lan78xx_link_status_change()
- lan78xx_link_reset()
- Handle fixed-link fallback for LAN7801 using phylink_set_fixed_link()
- Replace deprecated flow control handling with phylink-managed logic
Power management:
- Switch suspend/resume paths to use phylink_suspend()/phylink_resume()
- Ensure proper use of rtnl_lock() where required
- Note: full runtime testing of power management is currently limited
due to hardware setup constraints
Note: Conversion of EEE (Energy Efficient Ethernet) handling to the
PHYLINK-managed API will be done in a follow-up patch. For now, the
legacy EEE enable logic is preserved in mac_link_up().
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can avoid open-coding the loop construct which counts firmware child
nodes with a specific name by using the newly added
device_get_named_child_node_count().
The gianfar driver has such open-coded loop. Replace it with the
device_get_child_node_count_named().
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/3a33988fc042588cb00a0bfc5ad64e749cb0eb1f.1750248902.git.mazziesaccount@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to clean up of the VLAN handling, factor out the VLAN
handling into separate function fec_enet_rx_vlan().
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-11-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move __vlan_hwaccel_put_tag() into the if statement that sets
vlan_packet_rcvd = true. This change eliminates the unnecessary
vlan_packet_rcvd variable, simplifying the code and improving clarity.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-10-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to clean up of the VLAN handling, reduce the scope of data.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-9-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For better readability and maintainability, use the provided helper function
skb_vlan_eth_hdr() to replace manual the VLAN header calculation, and change
the type of vlan_header to struct vlan_ethhdr to take into account that the
Ethernet header plus VLAN header is returned.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-8-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are the functions fec_enet_rx_queue() and fec_enet_tx_queue(),
one for handling the RX queue the other one handles the TX queue.
However they don't have the same signature. Align fec_enet_rx_queue()
argument order with fec_enet_tx_queue() to make code more readable.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-7-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace "1 << 5" for configuring 1000 MBit/s with a defined constant to
improve code readability and maintainability.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-6-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
