mirror of
https://github.com/torvalds/linux.git
synced 2026-03-08 01:24:47 +01:00
83226 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Julian Anastasov
|
05cfe9863e |
ipvs: skip ipv6 extension headers for csum checks
Protocol checksum validation fails for IPv6 if there are extension headers before the protocol header. iph->len already contains its offset, so use it to fix the problem. Fixes: |
||
Florian Westphal
|
a6d28eb8ef |
netfilter: nf_conntrack_h323: don't pass uninitialised l3num value
Mihail Milev reports: Error: UNINIT (CWE-457):
net/netfilter/nf_conntrack_h323_main.c:1189:2: var_decl:
Declaring variable "tuple" without initializer.
net/netfilter/nf_conntrack_h323_main.c:1197:2:
uninit_use_in_call: Using uninitialized value "tuple.src.l3num" when calling "__nf_ct_expect_find".
net/netfilter/nf_conntrack_expect.c:142:2:
read_value: Reading value "tuple->src.l3num" when calling "nf_ct_expect_dst_hash".
1195| tuple.dst.protonum = IPPROTO_TCP;
1196|
1197|-> exp = __nf_ct_expect_find(net, nf_ct_zone(ct), &tuple);
1198| if (exp && exp->master == ct)
1199| return exp;
Switch this to a C99 initialiser and set the l3num value.
Fixes:
|
||
Brian Witte
|
7f261bb906 |
netfilter: nf_tables: revert commit_mutex usage in reset path
It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set' rule run at the same time. Previous patches made it safe to run individual reset handlers concurrently so commit_mutex is no longer required to prevent this. Fixes: |
||
|
Brian Witte
|
30c4d7fb59 |
netfilter: nft_quota: use atomic64_xchg for reset
Use atomic64_xchg() to atomically read and zero the consumed value on reset, which is simpler than the previous read+sub pattern and doesn't require lock serialization. Fixes: |
||
|
Brian Witte
|
779c60a519 |
netfilter: nft_counter: serialize reset with spinlock
Add a global static spinlock to serialize counter fetch+reset operations, preventing concurrent dump-and-reset from underrunning values. The lock is taken before fetching the total so that two parallel resets cannot both read the same counter values and then both subtract them. A global lock is used for simplicity since resets are infrequent. If this becomes a bottleneck, it can be replaced with a per-net lock later. Fixes: |
||
Sun Jian
|
07919126ec |
netfilter: annotate NAT helper hook pointers with __rcu
The NAT helper hook pointers are updated and dereferenced under RCU rules, but lack the proper __rcu annotation. This makes sparse report address space mismatches when the hooks are used with rcu_dereference(). Add the missing __rcu annotations to the global hook pointer declarations and definitions in Amanda, FTP, IRC, SNMP and TFTP. No functional change intended. Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> |
||
Eric Dumazet
|
26f29b1491 |
net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
CONFIG_PREEMPT_RT is special, make this clear in backlog_lock_irq_save()
and backlog_unlock_irq_restore().
The issue shows up with CONFIG_DEBUG_IRQFLAGS=y
raw_local_irq_restore() called with IRQs enabled
WARNING: kernel/locking/irqflag-debug.c:10 at warn_bogus_irq_restore+0xc/0x20 kernel/locking/irqflag-debug.c:10, CPU#1: aoe_tx0/1321
Modules linked in:
CPU: 1 UID: 0 PID: 1321 Comm: aoe_tx0 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:warn_bogus_irq_restore+0xc/0x20 kernel/locking/irqflag-debug.c:10
Call Trace:
<TASK>
backlog_unlock_irq_restore net/core/dev.c:253 [inline]
enqueue_to_backlog+0x525/0xcf0 net/core/dev.c:5347
netif_rx_internal+0x120/0x550 net/core/dev.c:5659
__netif_rx+0xa9/0x110 net/core/dev.c:5679
loopback_xmit+0x43a/0x660 drivers/net/loopback.c:90
__netdev_start_xmit include/linux/netdevice.h:5275 [inline]
netdev_start_xmit include/linux/netdevice.h:5284 [inline]
xmit_one net/core/dev.c:3864 [inline]
dev_hard_start_xmit+0x2df/0x830 net/core/dev.c:3880
__dev_queue_xmit+0x16f4/0x3990 net/core/dev.c:4829
dev_queue_xmit include/linux/netdevice.h:3384 [inline]
Fixes:
|
||
Nikolay Aleksandrov
|
8b769e311a |
net: bridge: mcast: always update mdb_n_entries for vlan contexts
syzbot triggered a warning[1] about the number of mdb entries in a context.
It turned out that there are multiple ways to trigger that warning today
(some got added during the years), the root cause of the problem is that
the increase is done conditionally, and over the years these different
conditions increased so there were new ways to trigger the warning, that is
to do a decrease which wasn't paired with a previous increase.
For example one way to trigger it is with flush:
$ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1
$ ip l add dumdum up master br0 type dummy
$ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1
$ ip link set dev br0 down
$ ip link set dev br0 type bridge mcast_vlan_snooping 1
^^^^ this will enable snooping, but will not update mdb_n_entries
because in __br_multicast_enable_port_ctx() we check !netif_running
$ bridge mdb flush dev br0
^^^ this will trigger the warning because it will delete the pg which
we added above, which will try to decrease mdb_n_entries
Fix the problem by removing the conditional increase and always keep the
count up-to-date while the vlan exists. In order to do that we have to
first initialize it on port-vlan context creation, and then always increase
or decrease the value regardless of mcast options. To keep the current
behaviour we have to enforce the mdb limit only if the context is port's or
if the port-vlan's mcast snooping is enabled.
[1]
------------[ cut here ]------------
n == 0
WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043
WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043
WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043
Modules linked in:
CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline]
RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline]
RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825
Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b
RSP: 0018:ffffc9000c207220 EFLAGS: 00010293
RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c
R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800
R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238
FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0
Call Trace:
<TASK>
br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline]
br_mdb_flush net/bridge/br_mdb.c:1544 [inline]
br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561
rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1
rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa45839aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fa45921b028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fa458615fa0 RCX: 00007fa45839aeb9
RDX: 0000000000000000 RSI: 00002000000000c0 RDI: 0000000000000004
RBP: 00007fa458408c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fa458616038 R14: 00007fa458615fa0 R15: 00007fff0b59fae8
</TASK>
Fixes:
|
||
Allison Henderson
|
da29e453dc |
net/rds: rds_sendmsg should not discard payload_len
Commit |
||
Linus Torvalds
|
011af61b9f |
- 9p/xen racy double-free fix
- track 9p RPC waiting time as IO -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE/IPbcYBuWt0zoYhOq06b7GqY5nAFAmmRjJcACgkQq06b7GqY 5nCUMA//WDifZs5ug0Zf/6pKJ3PIr/NmQf0XXPmn0YlR53Uz11X9CoXV0ZjQJsz6 Dsp5DMgHpTBizBb+iS/0wTuNqB1Imx+r5opEi/+vgVdl53XxcurmmqfJBULLdOhj a02PKH3VBzpTel93mYpvJvxil6dpN/fqfpKm2dGOcz8U6d5KFYpjkMZoYBVQWhQx 4Afyp71XHbuHamg68sw4UOmCTeWNGOxYPDrL/pVCl3usKC+6zX4vTADtS6ckjYtb 7s45hJmYuRQ8IyZnXEJeUefm3OoxwSxXUERP3lotMEiImMLE6g/IK5hiQaLYkPwb aEyNGP2ReISXUdXy0jJA3ILUcYs1+fbq89Rs93LC/+EzjQm5b23yfsEB5DyIAZnw giOXAcBjm/3cC7czw8Rw6Aa6dGjjWDg//5hOzDbvdVH54j3MnKzLiwQylgsszBKX dY58SMDGPdn/Bcf+TDyu5Ahr4GDARX0vVSLFot3xEULt9x90Sdd89GQffujIKx3v bIcGj0Ql/BRMnPVB5gZD2c8K+HeIIYrv/l4tlVLpOeKIepBw0yNnFMBDp+yQxbSf gkJxajkcjd9hEjaK1U4znJeX3cQzhgj0cpPRJq7b9SSC1+4c6PThL8PSDrmzCPJV DGBSFMHQR6g+zFy4xpbc5ErBReNZVXN1FqvCGo6TM0fTPvTNcV0= =ew5K -----END PGP SIGNATURE----- Merge tag '9p-for-7.0-rc1' of https://github.com/martinetd/linux Pull 9p updates from Dominique Martinet: - 9p/xen racy double-free fix - track 9p RPC waiting time as IO * tag '9p-for-7.0-rc1' of https://github.com/martinetd/linux: 9p/xen: protect xen_9pfs_front_free against concurrent calls 9p: Track 9P RPC waiting time as IO wait: Introduce io_wait_event_killable() |
||
Stefano Garzarella
|
6a997f38bd |
vsock: prevent child netns mode switch from local to global
A "local" namespace can change its `child_ns_mode` sysctl to "global",
allowing nested namespaces to access global CIDs. This can be exploited
by an unprivileged user who gained CAP_NET_ADMIN through a user
namespace.
Prevent this by rejecting writes that attempt to set `child_ns_mode` to
"global" when the current namespace's mode is "local".
Fixes:
|
||
|
Stefano Garzarella
|
9dd391493a |
vsock: fix child netns mode initialization
When a new network namespace is created, vsock_net_init() correctly
initializes the namespace's mode by reading the parent's `child_ns_mode`
via vsock_net_child_mode(). However, the `child_ns_mode` of the new
namespace was always hardcoded to VSOCK_NET_MODE_GLOBAL, regardless of
its own mode.
This means that if a parent namespace has `child_ns_mode` set to "local",
the child namespace correctly gets mode "local", but its `child_ns_mode`
is reset to "global". As a result, further nested namespaces will
incorrectly get mode "global" instead of inheriting "local", breaking
the expected propagation of the mode through nested namespaces.
Fix this by initializing `child_ns_mode` to the namespace's own mode,
so the setting propagates correctly through all levels of nesting.
Fixes:
|
||
Kuniyuki Iwashima
|
8244f959e2 |
ipv6: Fix out-of-bound access in fib6_add_rt2node().
syzbot reported out-of-bound read in fib6_add_rt2node(). [0]
When IPv6 route is created with RTA_NH_ID, struct fib6_info
does not have the trailing struct fib6_nh.
The cited commit started to check !iter->fib6_nh->fib_nh_gw_family
to ensure that rt6_qualify_for_ecmp() will return false for iter.
If iter->nh is not NULL, rt6_qualify_for_ecmp() returns false anyway.
Let's check iter->nh before reading iter->fib6_nh and avoid OOB read.
[0]:
BUG: KASAN: slab-out-of-bounds in fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142
Read of size 1 at addr ffff8880384ba6de by task syz.0.18/5500
CPU: 0 UID: 0 PID: 5500 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
fib6_add_rt2node+0x349c/0x3500 net/ipv6/ip6_fib.c:1142
fib6_add_rt2node_nh net/ipv6/ip6_fib.c:1363 [inline]
fib6_add+0x910/0x18c0 net/ipv6/ip6_fib.c:1531
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3957
inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f9316b9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd8809b678 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f9316e15fa0 RCX: 00007f9316b9aeb9
RDX: 0000000000000000 RSI: 0000200000004380 RDI: 0000000000000003
RBP: 00007f9316c08c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f9316e15fac R14: 00007f9316e15fa0 R15: 00007f9316e15fa0
</TASK>
Allocated by task 5499:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5657 [inline]
__kmalloc_noprof+0x40c/0x7e0 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
fib6_info_alloc+0x30/0xf0 net/ipv6/ip6_fib.c:155
ip6_route_info_create+0x142/0x860 net/ipv6/route.c:3820
ip6_route_add+0x49/0x1b0 net/ipv6/route.c:3949
inet6_rtm_newroute+0x268/0x19e0 net/ipv6/route.c:5660
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socket.c:2646
__sys_sendmsg net/socket.c:2678 [inline]
__do_sys_sendmsg net/socket.c:2683 [inline]
__se_sys_sendmsg net/socket.c:2681 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2681
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes:
|
||
Qanux
|
6db8b56eed |
ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00).
Fixes:
|
||
|
Linus Torvalds
|
a353e7260b |
virtio,vhost,vdpa: features, fixes
- in order support in virtio core - multiple address space support in vduse - fixes, cleanups all over the place, notably - dma alignment fixes for non cache coherent systems Signed-off-by: Michael S. Tsirkin <mst@redhat.com> -----BEGIN PGP SIGNATURE----- iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmmO9rYPHG1zdEByZWRo YXQuY29tAAoJECgfDbjSjVRpBzYH/2wUPo3T8/CKGFjF7QSPzgL/UI2NhnP8iSm4 btg1zVnrWmJK6vVIwnf5UsG8dFKsMcp/BEGCewTmIddNM2wEeSul0kKDXtIzrK/U jdA9bJrUKLMeU7IFKne1Fip/yE+5nkWJttWXXyVRJtOJrYxZlkWfqSns3qYcPvsG g7HXvF6tmici5uoKdRCLqHtQCWsvpnvTD5A7qoZAlEUjlQCDKKmuukpN9oK5UYLl 9uUOgPQAJaxIwx1C4uP7L+AwbLUcN/+MtrvQRNz+sFpP3sN9oXeDJKBpNQp109NB JGk1sUsINL+54Cmdd5RwZ9T1vBJyRDrdWRDy1yHj95LildaPfh0= =pnob -----END PGP SIGNATURE----- Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: - in-order support in virtio core - multiple address space support in vduse - fixes, cleanups all over the place, notably dma alignment fixes for non-cache-coherent systems * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits) vduse: avoid adding implicit padding vhost: fix caching attributes of MMIO regions by setting them explicitly vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr() vdpa/mlx5: reuse common function for MAC address updates vdpa/mlx5: update mlx_features with driver state check crypto: virtio: Replace package id with numa node id crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req crypto: virtio: Add spinlock protection with virtqueue notification Documentation: Add documentation for VDUSE Address Space IDs vduse: bump version number vduse: add vq group asid support vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls vduse: take out allocations from vduse_dev_alloc_coherent vduse: remove unused vaddr parameter of vduse_domain_free_coherent vduse: refactor vdpa_dev_add for goto err handling vhost: forbid change vq groups ASID if DRIVER_OK is set vdpa: document set_group_asid thread safety vduse: return internal vq group struct as map token vduse: add vq group support vduse: add v1 API definition ... |
||
Jeremy Kerr
|
a6a9bc544b |
net: mctp: ensure our nlmsg responses are initialised
Syed Faraz Abrar (@farazsth98) from Zellic, and Pumpkin (@u1f383) from DEVCORE Research Team working with Trend Micro Zero Day Initiative report that a RTM_GETNEIGH will return uninitalised data in the pad bytes of the ndmsg data. Ensure we're initialising the netlink data to zero, in the link, addr and neigh response messages. Fixes: |
||
|
Linus Torvalds
|
7449f86baf |
NFS Client Updates for Linux 7.0
New Features:
* Use an LRU list for returning unused delegations
* Introduce a KConfig option to disable NFS v4.0 and make NFS v4.1 the default
Bugfixes:
* NFS/localio: Handle short writes by retrying
* NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages
* NFS/localio: use GFP_NOIO and non-memreclaim workqueue in nfs_local_commit
* NFS/localio: remove -EAGAIN handling in nfs_local_doio()
* pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN
* fs/nfs: Fix a readdir slow-start regression
* SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Other Cleanups and Improvements:
* A few other NFS/localio cleanups
* Various other delegation handling cleanups from Christoph
* Unify security_inode_listsecurity() calls
* Improvements to NFSv4 lease handling
* Clean up SUNRPC *_debug fields when CONFIG_SUNRPC_DEBUG is not set
-----BEGIN PGP SIGNATURE-----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=CwZq
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-7.0-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Use an LRU list for returning unused delegations
- Introduce a KConfig option to disable NFS v4.0 and make NFS v4.1
the default
Bugfixes:
- NFS/localio:
- Handle short writes by retrying
- Prevent direct reclaim recursion into NFS via nfs_writepages
- Use GFP_NOIO and non-memreclaim workqueue in nfs_local_commit
- Remove -EAGAIN handling in nfs_local_doio()
- pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN
- fs/nfs: Fix a readdir slow-start regression
- SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Other cleanups and improvements:
- A few other NFS/localio cleanups
- Various other delegation handling cleanups from Christoph
- Unify security_inode_listsecurity() calls
- Improvements to NFSv4 lease handling
- Clean up SUNRPC *_debug fields when CONFIG_SUNRPC_DEBUG is not set"
* tag 'nfs-for-7.0-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (60 commits)
SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
nfs: nfs4proc: Convert comma to semicolon
SUNRPC: Change list definition method
sunrpc: rpc_debug and others are defined even if CONFIG_SUNRPC_DEBUG unset
NFSv4: limit lease period in nfs4_set_lease_period()
NFSv4: pass lease period in seconds to nfs4_set_lease_period()
nfs: unify security_inode_listsecurity() calls
fs/nfs: Fix readdir slow-start regression
pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN
NFS: fix delayed delegation return handling
NFS: simplify error handling in nfs_end_delegation_return
NFS: fold nfs_abort_delegation_return into nfs_end_delegation_return
NFS: remove the delegation == NULL check in nfs_end_delegation_return
NFS: use bool for the issync argument to nfs_end_delegation_return
NFS: return void from ->return_delegation
NFS: return void from nfs4_inode_make_writeable
NFS: Merge CONFIG_NFS_V4_1 with CONFIG_NFS_V4
NFS: Add a way to disable NFS v4.0 via KConfig
NFS: Move sequence slot operations into minorversion operations
NFS: Pass a struct nfs_client to nfs4_init_sequence()
...
|
||
|
Linus Torvalds
|
311aa68319 |
RDMA v7.0 merge window
Usual smallish cycle:
- Various code improvements in irdma, rtrs, qedr, ocrdma, irdma, rxe
- Small driver improvements and minor bug fixes to hns, mlx5, rxe, mana,
mlx5, irdma
- Robusness improvements in completion processing for EFA
- New query_port_speed() verb to move past limited IBA defined speed steps
- Support for SG_GAPS in rts and many other small improvements
- Rare list corruption fix in iwcm
- Better support different page sizes in rxe
- Device memory support for mana
- Direct bio vec to kernel MR for use by NFS-RDMA
- QP rate limiting for bnxt_re
- Remote triggerable NULL pointer crash in siw
- DMA-buf exporter support for RDMA mmaps like doorbells
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaY44vgAKCRCFwuHvBreF
YfiZAP91cMZfogN7r1FMD75xDZu55dI3Jvy8OaixyRxlWLGPcQEAjritdL0o7fZp
YrD1OXNS/1XG//rPBVw7xj+54Aa8hAU=
=AVcu
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual smallish cycle. The NFS biovec work to push it down into RDMA
instead of indirecting through a scatterlist is pretty nice to see,
been talked about for a long time now.
- Various code improvements in irdma, rtrs, qedr, ocrdma, irdma, rxe
- Small driver improvements and minor bug fixes to hns, mlx5, rxe,
mana, mlx5, irdma
- Robusness improvements in completion processing for EFA
- New query_port_speed() verb to move past limited IBA defined speed
steps
- Support for SG_GAPS in rts and many other small improvements
- Rare list corruption fix in iwcm
- Better support different page sizes in rxe
- Device memory support for mana
- Direct bio vec to kernel MR for use by NFS-RDMA
- QP rate limiting for bnxt_re
- Remote triggerable NULL pointer crash in siw
- DMA-buf exporter support for RDMA mmaps like doorbells"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/mlx5: Implement DMABUF export ops
RDMA/uverbs: Add DMABUF object type and operations
RDMA/uverbs: Support external FD uobjects
RDMA/siw: Fix potential NULL pointer dereference in header processing
RDMA/umad: Reject negative data_len in ib_umad_write
IB/core: Extend rate limit support for RC QPs
RDMA/mlx5: Support rate limit only for Raw Packet QP
RDMA/bnxt_re: Report QP rate limit in debugfs
RDMA/bnxt_re: Report packet pacing capabilities when querying device
RDMA/bnxt_re: Add support for QP rate limiting
MAINTAINERS: Drop RDMA files from Hyper-V section
RDMA/uverbs: Add __GFP_NOWARN to ib_uverbs_unmarshall_recv() kmalloc
svcrdma: use bvec-based RDMA read/write API
RDMA/core: add rdma_rw_max_sge() helper for SQ sizing
RDMA/core: add MR support for bvec-based RDMA operations
RDMA/core: use IOVA-based DMA mapping for bvec RDMA operations
RDMA/core: add bio_vec based RDMA read/write API
RDMA/irdma: Use kvzalloc for paged memory DMA address array
RDMA/rxe: Fix race condition in QP timer handlers
RDMA/mana_ib: Add device‑memory support
...
|
||
|
Linus Torvalds
|
136114e0ab |
mm.git review status for linus..mm-nonmm-stable
Total patches: 107 Reviews/patch: 1.07 Reviewed rate: 67% - The 2 patch series "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" from Heming Zhao saves disk space by teaching ocfs2 to reclaim suballocator block group space. - The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in various places. - The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size. - The 7 patch series "kallsyms: Prevent invalid access when showing module buildid" from Petr Mladek cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces. - The 3 patch series "Address page fault in ima_restore_measurement_list()" from Harshit Mogalapalli fixes a kexec-related crash that can occur when booting the second-stage kernel on x86. - The 6 patch series "kho: ABI headers and Documentation updates" from Mike Rapoport updates the kexec handover ABI documentation. - The 4 patch series "Align atomic storage" from Finn Thain adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh. - The 2 patch series "kho: clean up page initialization logic" from Pratyush Yadav simplifies the page initialization logic in kho_restore_page(). - The 6 patch series "Unload linux/kernel.h" from Yury Norov moves several things out of kernel.h and into more appropriate places. - The 7 patch series "don't abuse task_struct.group_leader" from Oleg Nesterov removes the usage of ->group_leader when it is "obviously unnecessary". - The 5 patch series "list private v2 & luo flb" from Pasha Tatashin adds some infrastructure improvements to the live update orchestrator. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6 0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww= =mmsH -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves disk space by teaching ocfs2 to reclaim suballocator block group space (Heming Zhao) - "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the ARRAY_END() macro and uses it in various places (Alejandro Colomar) - "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the page size (Pnina Feder) - "kallsyms: Prevent invalid access when showing module buildid" cleans up kallsyms code related to module buildid and fixes an invalid access crash when printing backtraces (Petr Mladek) - "Address page fault in ima_restore_measurement_list()" fixes a kexec-related crash that can occur when booting the second-stage kernel on x86 (Harshit Mogalapalli) - "kho: ABI headers and Documentation updates" updates the kexec handover ABI documentation (Mike Rapoport) - "Align atomic storage" adds the __aligned attribute to atomic_t and atomic64_t definitions to get natural alignment of both types on csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain) - "kho: clean up page initialization logic" simplifies the page initialization logic in kho_restore_page() (Pratyush Yadav) - "Unload linux/kernel.h" moves several things out of kernel.h and into more appropriate places (Yury Norov) - "don't abuse task_struct.group_leader" removes the usage of ->group_leader when it is "obviously unnecessary" (Oleg Nesterov) - "list private v2 & luo flb" adds some infrastructure improvements to the live update orchestrator (Pasha Tatashin) * tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits) watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency procfs: fix missing RCU protection when reading real_parent in do_task_stat() watchdog/softlockup: fix sample ring index wrap in need_counting_irqs() kcsan, compiler_types: avoid duplicate type issues in BPF Type Format kho: fix doc for kho_restore_pages() tests/liveupdate: add in-kernel liveupdate test liveupdate: luo_flb: introduce File-Lifecycle-Bound global state liveupdate: luo_file: Use private list list: add kunit test for private list primitives list: add primitives for private list manipulations delayacct: fix uapi timespec64 definition panic: add panic_force_cpu= parameter to redirect panic to a specific CPU netclassid: use thread_group_leader(p) in update_classid_task() RDMA/umem: don't abuse current->group_leader drm/pan*: don't abuse current->group_leader drm/amd: kill the outdated "Only the pthreads threading model is supported" checks drm/amdgpu: don't abuse current->group_leader android/binder: use same_thread_group(proc->tsk, current) in binder_mmap() android/binder: don't abuse current->group_leader kho: skip memoryless NUMA nodes when reserving scratch areas ... |
||
|
Linus Torvalds
|
2831fa8b8b |
NFSD 7.0 Release Notes
Neil Brown and Jeff Layton contributed a dynamic thread pool sizing mechanism for NFSD. The sunrpc layer now tracks minimum and maximum thread counts per pool, and NFSD adjusts running thread counts based on workload: idle threads exit after a timeout when the pool exceeds its minimum, and new threads spawn automatically when all threads are busy. Administrators control this behavior via the nfsdctl netlink interface. Rick Macklem, FreeBSD NFS maintainer, generously contributed server- side support for the POSIX ACL extension to NFSv4, as specified in draft-ietf-nfsv4-posix-acls. This extension allows NFSv4 clients to get and set POSIX access and default ACLs using native NFSv4 operations, eliminating the need for sideband protocols. The feature is gated by a Kconfig option since the IETF draft has not yet been ratified. Chuck Lever delivered numerous improvements to the xdrgen tool. Error reporting now covers parsing, AST transformation, and invalid declarations. Generated enum decoders validate incoming values against valid enumerator lists. New features include pass-through line support for embedding C directives in XDR specifications, 16-bit integer types, and program number definitions. Several code generation issues were also addressed. When an administrator revokes NFSv4 state for a filesystem via the unlock_fs interface, ongoing async COPY operations referencing that filesystem are now cancelled, with CB_OFFLOAD callbacks notifying affected clients. The remaining patches in this pull request are clean-ups and minor optimizations. Sincere thanks to all contributors, reviewers, testers, and bug reporters who participated in the v7.0 NFSD development cycle. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmmJ8kAACgkQM2qzM29m f5ejCQ//RdoWNgN1VZdNoUrh1tm1Fhi1YN/RJS26G25OxgTBc3/qtGxrpW+ZAW6+ mIAJ2bT/l66741drki4/x6WJU4OMI/4mJxrLd0WCb1POaeRQWnL1MdzNY+IP/QZv 3DgcTv1T6FKE7pFmAqW0nFPCgaK+vlR+fo4uJognbB6+hZB3HlrLkfeZOWMAmchC y3U6nzrtP+IljAtdzKZ120E+LHp0PtTbJwPCPSt3/FR/dkA0DcjnOS9jybIYlJOu 0ByX24BcrW/c3rJUdL8lL4G7gsPWjdARqczFiN8sufI9Q3zlHOxtYdUT7BNjd+04 jcSKLlAXwcbNcK2f54B/QFKmNxllvoHLB3wo2hfEPig4LQELuxcUHYxmmD4vNKen lp6zmaLq3PiRGlew6eLRFxRxbdLds+9l0xjXV+J+rtQmjppXdXUoVNMm+D+tD6bF T5TUq4WNCGJIrpkR7pdF7uMD51s8fphvaDxOCjhSi3WHAtZAhOR8HFUU97qddM34 KqF6Gph3tN/C4oNb8kKvzxBRpRhHIzKHZbreiu5fZr9pPe9IRBHnn/Dg4p/yYQcw K3/y1EnKrIlprfbFFkY1LzNFpf309uoZTVzwBcMfSJVsFgUqWD7KHJ/rmCJQ/pS6 k0+YLRoUmtUHDYk2QNlstlt7r6FwA0d2GjT8n7viGoNQ3PA7rJQ= =hqla -----END PGP SIGNATURE----- Merge tag 'nfsd-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd updates from Chuck Lever: "Neil Brown and Jeff Layton contributed a dynamic thread pool sizing mechanism for NFSD. The sunrpc layer now tracks minimum and maximum thread counts per pool, and NFSD adjusts running thread counts based on workload: idle threads exit after a timeout when the pool exceeds its minimum, and new threads spawn automatically when all threads are busy. Administrators control this behavior via the nfsdctl netlink interface. Rick Macklem, FreeBSD NFS maintainer, generously contributed server- side support for the POSIX ACL extension to NFSv4, as specified in draft-ietf-nfsv4-posix-acls. This extension allows NFSv4 clients to get and set POSIX access and default ACLs using native NFSv4 operations, eliminating the need for sideband protocols. The feature is gated by a Kconfig option since the IETF draft has not yet been ratified. Chuck Lever delivered numerous improvements to the xdrgen tool. Error reporting now covers parsing, AST transformation, and invalid declarations. Generated enum decoders validate incoming values against valid enumerator lists. New features include pass-through line support for embedding C directives in XDR specifications, 16-bit integer types, and program number definitions. Several code generation issues were also addressed. When an administrator revokes NFSv4 state for a filesystem via the unlock_fs interface, ongoing async COPY operations referencing that filesystem are now cancelled, with CB_OFFLOAD callbacks notifying affected clients. The remaining patches in this pull request are clean-ups and minor optimizations. Sincere thanks to all contributors, reviewers, testers, and bug reporters who participated in the v7.0 NFSD development cycle" * tag 'nfsd-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits) NFSD: Add POSIX ACL file attributes to SUPPATTR bitmasks NFSD: Add POSIX draft ACL support to the NFSv4 SETATTR operation NFSD: Add support for POSIX draft ACLs for file creation NFSD: Add support for XDR decoding POSIX draft ACLs NFSD: Refactor nfsd_setattr()'s ACL error reporting NFSD: Do not allow NFSv4 (N)VERIFY to check POSIX ACL attributes NFSD: Add nfsd4_encode_fattr4_posix_access_acl NFSD: Add nfsd4_encode_fattr4_posix_default_acl NFSD: Add nfsd4_encode_fattr4_acl_trueform_scope NFSD: Add nfsd4_encode_fattr4_acl_trueform Add RPC language definition of NFSv4 POSIX ACL extension NFSD: Add a Kconfig setting to enable support for NFSv4 POSIX ACLs xdrgen: Implement pass-through lines in specifications nfsd: cancel async COPY operations when admin revokes filesystem state nfsd: add controls to set the minimum number of threads per pool nfsd: adjust number of running nfsd threads based on activity sunrpc: allow svc_recv() to return -ETIMEDOUT and -EBUSY sunrpc: split new thread creation into a separate function sunrpc: introduce the concept of a minimum number of threads per pool sunrpc: track the max number of requested threads in a pool ... |
||
|
Linus Torvalds
|
37a93dd5c4 |
Networking changes for 7.0
Core & protocols
----------------
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls for
small helper and stack canary overhead in the fast-path. This
generates better and faster code with very small or no text size
increases, as in many cases the call generated more code than the
actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage by
up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the RX
path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without the
HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified, aligning
IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the rate
shaper of sch_cake across multiple CPUs, while still enforcing a
single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations that
are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information, saving
cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most protocols,
avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies between
the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes back
online.
Driver API
----------
- Support for switching the working mode (automatic vs manual) of a DPLL
device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties, to
generalize polarity inversion requirements for differential signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers
--------------
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram and
NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the used
H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO, leading to
12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN metadata
access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support
multi-wiphy devices and and pave the way for future device support
in the same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=O31Y
-----END PGP SIGNATURE-----
Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
Device drivers:
- Add Huawei hinic3 PF etherner driver.
- Add DWMAC glue driver for Motorcomm YT6801 PCIe ethernet
controller.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
|
||
Paolo Abeni
|
83310d6133 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Merge in late fixes in preparation for the net-next PR. Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Kuniyuki Iwashima
|
6884028cd7 |
af_unix: Fix memleak of newsk in unix_stream_connect().
When prepare_peercred() fails in unix_stream_connect(),
unix_release_sock() is not called for newsk, and the memory
is leaked.
Let's move prepare_peercred() before unix_create1().
Fixes:
|
||
Daniel Golle
|
85ee987429 |
net: dsa: add tag format for MxL862xx switches
Add proprietary special tag format for the MaxLinear MXL862xx family of switches. While using the same Ethertype as MaxLinear's GSW1xx switches, the actual tag format differs significantly, hence we need a dedicated tag driver for that. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Link: https://patch.msgid.link/c64e6ddb6c93a4fac39f9ab9b2d8bf551a2b118d.1770433307.git.daniel@makrotopia.org Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Eric Dumazet
|
97d7ae6e14 |
tcp: inet6_csk_xmit() optimization
After prior patches, inet6_csk_xmit() can reuse inet->cork.fl.u.ip6 if __sk_dst_check() returns a valid dst. Otherwise call inet6_csk_route_socket() to refresh inet->cork.fl.u.ip6 content and get a new dst. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260206173426.1638518-8-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
a6eee39cc2 |
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
As explained in commit
|
||
|
Eric Dumazet
|
19bdb267f7 |
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
Instead of using private @fl6 and @final variables
use respectively inet->cork.fl.u.ip6 and np->final.
As explained in commit
|
||
|
Eric Dumazet
|
969a20198b |
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
Convert inet6_csk_route_socket() to use np->final instead of an automatic variable to get rid of a stack canary. Convert inet6_csk_xmit() and inet6_csk_update_pmtu() to use inet->cork.fl.u.ip6 instead of @fl6 automatic variable. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260206173426.1638518-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
4e6c91cf60 |
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
Get rid of @fl6 and &final variables in ip6_datagram_dst_update(). Use instead inet->cork.fl.u.ip6 and np->final so that a stack canary is no longer needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260206173426.1638518-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Eric Dumazet
|
3d3f075e80 |
ipv6: use np->final in inet6_sk_rebuild_header()
Instead of using an automatic variable, use np->final to get rid of the stack canary in inet6_sk_rebuild_header(). Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20260206173426.1638518-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Jakub Kicinski
|
792aaea994 |
netfilter pull request nf-next-26-02-06
-----BEGIN PGP SIGNATURE----- iQJdBAABCABHFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmmGB20bFIAAAAAABAAO bWFudTIsMi41KzEuMTEsMiwyDRxmd0BzdHJsZW4uZGUACgkQcJGo2a1f9gC/tQ/7 B7/akiCP/QeGF7go78PZQlpIGmjtoCOcQ9uxymlmpLkArepcIEkgZ04tFH0FClY6 d3QPfT9iNap222aCQxZwCiaWrXqUNynW7RwH72SkqGmO8JTLKlzW8CQC+yGkyznj FxwRKzB8XO5Ohtw0wED3mzcf9DelsvJpX5rCU5gEjsHZjKA/rEwYgovyM+es+xSx JbHHc2tzLQuDZ1BL7rEW8TJDxmJ2bCsFJHKeIvykk3D2nVg01P0AwhUeIy+7ObV7 bQh7B8DhYwKNLtgZvDi8D6o4nWQvkjfF5BadrWusumDCtIupcwbelpcUeCsUWBqC oCjLMcH7TwmT513RXWMId50z93FWciduCHUGrQt4BxLBZmkQ9kE0iamZVIAAzLl8 VYIM9qb+nUk58jnLFl3xTqW2GetSj/p31bp6e78+SQFvqjie2z9/I+nGBr7A8aAB bNd5vpvHSEg5OP7oKk+Dhr26MiCDowtuzvdC4lYR+loFYoI+a1FS6a1w/kcw9/VA XmR6Y8is+CTy4XYTQZ4klYTVpoTkWa/D/t1CTC4IlELzYS49L6qSyef6m91IWeQ6 Way5+3ZON7sA6SM1PZ/zjsKDxYLo/hQz2+dw6YLVflfY62khvuK2Yc56MQcZEjsH 7x0b3MaKvNn9yqKC+Mk7QZ55nCjV3wyGp3GQ+ClAqZ4= =wU6p -----END PGP SIGNATURE----- Merge tag 'nf-next-26-02-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Florian Westphal says: ==================== netfilter: updates for net-next The following patchset contains Netfilter updates for *net-next*: 1) Fix net-next-only use-after-free bug in nf_tables rbtree set: Expired elements cannot be released right away after unlink anymore because there is no guarantee that the binary-search blob is going to be updated. Spotted by syzkaller. 2) Fix esoteric bug in nf_queue with udp fraglist gro, broken since 6.11. Patch 3 adds extends the nfqueue selftest for this. 4) Use dedicated slab for flowtable entries, currently the -512 cache is used, which is wasteful. From Qingfang Deng. 5) Recent net-next update extended existing test for ip6ip6 tunnels, add the required /config entry. Test still passed by accident because the previous tests network setup gets re-used, so also update the test so it will fail in case the ip6ip6 tunnel interface cannot be added. 6) Fix 'nft get element mytable myset { 1.2.3.4 }' on big endian platforms, this was broken since code was added in v5.1. 7) Fix nf_tables counter reset support on 32bit platforms, where counter reset may cause huge values to appear due to wraparound. Broken since reset feature was added in v6.11. From Anders Grahn. 8-11) update nf_tables rbtree set type to detect partial operlaps. This will eventually speed up nftables userspace: at this time userspace does a netlink dump of the set content which slows down incremental updates on interval sets. From Pablo Neira Ayuso. * tag 'nf-next-26-02-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nft_set_rbtree: validate open interval overlap netfilter: nft_set_rbtree: validate element belonging to interval netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets netfilter: nft_set_rbtree: fix bogus EEXIST with NLM_F_CREATE with null interval netfilter: nft_counter: fix reset of counters on 32bit archs netfilter: nft_set_hash: fix get operation on big endian selftests: netfilter: add IPV6_TUNNEL to config netfilter: flowtable: dedicated slab for flow entry selftests: netfilter: nft_queue.sh: add udp fraglist gro test case netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation netfilter: nft_set_rbtree: don't gc elements on insert ==================== Link: https://patch.msgid.link/20260206153048.17570-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Geliang Tang
|
e5e2e43002 |
mptcp: allow overridden write_space to be invoked
Future extensions with psock will override their own sk->sk_write_space callback. This patch ensures that the overridden sk_write_space can be invoked by MPTCP. INDIRECT_CALL is used to keep the default path optimised. Note that sk->sk_write_space was never called directly with MPTCP sockets, so changing it to sk_stream_write_space in the init, and using it from mptcp_write_space() is not supposed to change the current behaviour. This patch is shared early to ease discussions around future RFC and avoid confusions with this "fix" that is needed for different future extensions. Suggested-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Gang Yan <yangang@kylinos.cn> Signed-off-by: Gang Yan <yangang@kylinos.cn> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20260206-net-next-mptcp-write_space-override-v2-1-e0b12be818c6@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
0923fd0419 |
Locking updates for v6.20:
Lock debugging:
- Implement compiler-driven static analysis locking context
checking, using the upcoming Clang 22 compiler's context
analysis features. (Marco Elver)
We removed Sparse context analysis support, because prior to
removal even a defconfig kernel produced 1,700+ context
tracking Sparse warnings, the overwhelming majority of which
are false positives. On an allmodconfig kernel the number of
false positive context tracking Sparse warnings grows to
over 5,200... On the plus side of the balance actual locking
bugs found by Sparse context analysis is also rather ... sparse:
I found only 3 such commits in the last 3 years. So the
rate of false positives and the maintenance overhead is
rather high and there appears to be no active policy in
place to achieve a zero-warnings baseline to move the
annotations & fixers to developers who introduce new code.
Clang context analysis is more complete and more aggressive
in trying to find bugs, at least in principle. Plus it has
a different model to enabling it: it's enabled subsystem by
subsystem, which results in zero warnings on all relevant
kernel builds (as far as our testing managed to cover it).
Which allowed us to enable it by default, similar to other
compiler warnings, with the expectation that there are no
warnings going forward. This enforces a zero-warnings baseline
on clang-22+ builds. (Which are still limited in distribution,
admittedly.)
Hopefully the Clang approach can lead to a more maintainable
zero-warnings status quo and policy, with more and more
subsystems and drivers enabling the feature. Context tracking
can be enabled for all kernel code via WARN_CONTEXT_ANALYSIS_ALL=y
(default disabled), but this will generate a lot of false positives.
( Having said that, Sparse support could still be added back,
if anyone is interested - the removal patch is still
relatively straightforward to revert at this stage. )
Rust integration updates: (Alice Ryhl, Fujita Tomonori, Boqun Feng)
- Add support for Atomic<i8/i16/bool> and replace most Rust native
AtomicBool usages with Atomic<bool>
- Clean up LockClassKey and improve its documentation
- Add missing Send and Sync trait implementation for SetOnce
- Make ARef Unpin as it is supposed to be
- Add __rust_helper to a few Rust helpers as a preparation for
helper LTO
- Inline various lock related functions to avoid additional
function calls.
WW mutexes:
- Extend ww_mutex tests and other test-ww_mutex updates (John Stultz)
Misc fixes and cleanups:
- rcu: Mark lockdep_assert_rcu_helper() __always_inline
(Arnd Bergmann)
- locking/local_lock: Include more missing headers (Peter Zijlstra)
- seqlock: fix scoped_seqlock_read kernel-doc (Randy Dunlap)
- rust: sync: Replace `kernel::c_str!` with C-Strings
(Tamir Duberstein)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=N1gA
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2026-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lock debugging:
- Implement compiler-driven static analysis locking context checking,
using the upcoming Clang 22 compiler's context analysis features
(Marco Elver)
We removed Sparse context analysis support, because prior to
removal even a defconfig kernel produced 1,700+ context tracking
Sparse warnings, the overwhelming majority of which are false
positives. On an allmodconfig kernel the number of false positive
context tracking Sparse warnings grows to over 5,200... On the plus
side of the balance actual locking bugs found by Sparse context
analysis is also rather ... sparse: I found only 3 such commits in
the last 3 years. So the rate of false positives and the
maintenance overhead is rather high and there appears to be no
active policy in place to achieve a zero-warnings baseline to move
the annotations & fixers to developers who introduce new code.
Clang context analysis is more complete and more aggressive in
trying to find bugs, at least in principle. Plus it has a different
model to enabling it: it's enabled subsystem by subsystem, which
results in zero warnings on all relevant kernel builds (as far as
our testing managed to cover it). Which allowed us to enable it by
default, similar to other compiler warnings, with the expectation
that there are no warnings going forward. This enforces a
zero-warnings baseline on clang-22+ builds (Which are still limited
in distribution, admittedly)
Hopefully the Clang approach can lead to a more maintainable
zero-warnings status quo and policy, with more and more subsystems
and drivers enabling the feature. Context tracking can be enabled
for all kernel code via WARN_CONTEXT_ANALYSIS_ALL=y (default
disabled), but this will generate a lot of false positives.
( Having said that, Sparse support could still be added back,
if anyone is interested - the removal patch is still
relatively straightforward to revert at this stage. )
Rust integration updates: (Alice Ryhl, Fujita Tomonori, Boqun Feng)
- Add support for Atomic<i8/i16/bool> and replace most Rust native
AtomicBool usages with Atomic<bool>
- Clean up LockClassKey and improve its documentation
- Add missing Send and Sync trait implementation for SetOnce
- Make ARef Unpin as it is supposed to be
- Add __rust_helper to a few Rust helpers as a preparation for
helper LTO
- Inline various lock related functions to avoid additional function
calls
WW mutexes:
- Extend ww_mutex tests and other test-ww_mutex updates (John
Stultz)
Misc fixes and cleanups:
- rcu: Mark lockdep_assert_rcu_helper() __always_inline (Arnd
Bergmann)
- locking/local_lock: Include more missing headers (Peter Zijlstra)
- seqlock: fix scoped_seqlock_read kernel-doc (Randy Dunlap)
- rust: sync: Replace `kernel::c_str!` with C-Strings (Tamir
Duberstein)"
* tag 'locking-core-2026-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (90 commits)
locking/rwlock: Fix write_trylock_irqsave() with CONFIG_INLINE_WRITE_TRYLOCK
rcu: Mark lockdep_assert_rcu_helper() __always_inline
compiler-context-analysis: Remove __assume_ctx_lock from initializers
tomoyo: Use scoped init guard
crypto: Use scoped init guard
kcov: Use scoped init guard
compiler-context-analysis: Introduce scoped init guards
cleanup: Make __DEFINE_LOCK_GUARD handle commas in initializers
seqlock: fix scoped_seqlock_read kernel-doc
tools: Update context analysis macros in compiler_types.h
rust: sync: Replace `kernel::c_str!` with C-Strings
rust: sync: Inline various lock related methods
rust: helpers: Move #define __rust_helper out of atomic.c
rust: wait: Add __rust_helper to helpers
rust: time: Add __rust_helper to helpers
rust: task: Add __rust_helper to helpers
rust: sync: Add __rust_helper to helpers
rust: refcount: Add __rust_helper to helpers
rust: rcu: Add __rust_helper to helpers
rust: processor: Add __rust_helper to helpers
...
|
||
|
Linus Torvalds
|
f17b474e36 |
bpf-next-7.0
-----BEGIN PGP SIGNATURE-----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=cBdK
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support associating BPF program with struct_ops (Amery Hung)
- Switch BPF local storage to rqspinlock and remove recursion detection
counters which were causing false positives (Amery Hung)
- Fix live registers marking for indirect jumps (Anton Protopopov)
- Introduce execution context detection BPF helpers (Changwoo Min)
- Improve verifier precision for 32bit sign extension pattern
(Cupertino Miranda)
- Optimize BTF type lookup by sorting vmlinux BTF and doing binary
search (Donglin Peng)
- Allow states pruning for misc/invalid slots in iterator loops (Eduard
Zingerman)
- In preparation for ASAN support in BPF arenas teach libbpf to move
global BPF variables to the end of the region and enable arena kfuncs
while holding locks (Emil Tsalapatis)
- Introduce support for implicit arguments in kfuncs and migrate a
number of them to new API. This is a prerequisite for cgroup
sub-schedulers in sched-ext (Ihor Solodrai)
- Fix incorrect copied_seq calculation in sockmap (Jiayuan Chen)
- Fix ORC stack unwind from kprobe_multi (Jiri Olsa)
- Speed up fentry attach by using single ftrace direct ops in BPF
trampolines (Jiri Olsa)
- Require frozen map for calculating map hash (KP Singh)
- Fix lock entry creation in TAS fallback in rqspinlock (Kumar
Kartikeya Dwivedi)
- Allow user space to select cpu in lookup/update operations on per-cpu
array and hash maps (Leon Hwang)
- Make kfuncs return trusted pointers by default (Matt Bobrowski)
- Introduce "fsession" support where single BPF program is executed
upon entry and exit from traced kernel function (Menglong Dong)
- Allow bpf_timer and bpf_wq use in all programs types (Mykyta
Yatsenko, Andrii Nakryiko, Kumar Kartikeya Dwivedi, Alexei
Starovoitov)
- Make KF_TRUSTED_ARGS the default for all kfuncs and clean up their
definition across the tree (Puranjay Mohan)
- Allow BPF arena calls from non-sleepable context (Puranjay Mohan)
- Improve register id comparison logic in the verifier and extend
linked registers with negative offsets (Puranjay Mohan)
- In preparation for BPF-OOM introduce kfuncs to access memcg events
(Roman Gushchin)
- Use CFI compatible destructor kfunc type (Sami Tolvanen)
- Add bitwise tracking for BPF_END in the verifier (Tianci Cao)
- Add range tracking for BPF_DIV and BPF_MOD in the verifier (Yazhou
Tang)
- Make BPF selftests work with 64k page size (Yonghong Song)
* tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (268 commits)
selftests/bpf: Fix outdated test on storage->smap
selftests/bpf: Choose another percpu variable in bpf for btf_dump test
selftests/bpf: Remove test_task_storage_map_stress_lookup
selftests/bpf: Update task_local_storage/task_storage_nodeadlock test
selftests/bpf: Update task_local_storage/recursion test
selftests/bpf: Update sk_storage_omem_uncharge test
bpf: Switch to bpf_selem_unlink_nofail in bpf_local_storage_{map_free, destroy}
bpf: Support lockless unlink when freeing map or local storage
bpf: Prepare for bpf_selem_unlink_nofail()
bpf: Remove unused percpu counter from bpf_local_storage_map_free
bpf: Remove cgroup local storage percpu counter
bpf: Remove task local storage percpu counter
bpf: Change local_storage->lock and b->lock to rqspinlock
bpf: Convert bpf_selem_unlink to failable
bpf: Convert bpf_selem_link_map to failable
bpf: Convert bpf_selem_unlink_map to failable
bpf: Select bpf_local_storage_map_bucket based on bpf_local_storage
selftests/xsk: fix number of Tx frags in invalid packet
selftests/xsk: properly handle batch ending in the middle of a packet
bpf: Prevent reentrance into call_rcu_tasks_trace()
...
|
||
|
Linus Torvalds
|
13d83ea9d8 |
Crypto library updates for 7.0
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaYlV8xQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK1ffAQCbM+cnqF4ThspBCgLZGSScx02KsA4U
dQblKoOFyIEbnwEA1ElJNhNQs2m7AT+R0hOh6yI+5+ttUfqLMT9tuNs2mwM=
=iZ06
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Add support for verifying ML-DSA signatures.
ML-DSA (Module-Lattice-Based Digital Signature Algorithm) is a
recently-standardized post-quantum (quantum-resistant) signature
algorithm. It was known as Dilithium pre-standardization.
The first use case in the kernel will be module signing. But there
are also other users of RSA and ECDSA signatures in the kernel that
might want to upgrade to ML-DSA eventually.
- Improve the AES library:
- Make the AES key expansion and single block encryption and
decryption functions use the architecture-optimized AES code.
Enable these optimizations by default.
- Support preparing an AES key for encryption-only, using about
half as much memory as a bidirectional key.
- Replace the existing two generic implementations of AES with a
single one.
- Simplify how Adiantum message hashing is implemented. Remove the
"nhpoly1305" crypto_shash in favor of direct lib/crypto/ support for
NH hashing, and enable optimizations by default.
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (53 commits)
lib/crypto: mldsa: Clarify the documentation for mldsa_verify() slightly
lib/crypto: aes: Drop 'volatile' from aes_sbox and aes_inv_sbox
lib/crypto: aes: Remove old AES en/decryption functions
lib/crypto: aesgcm: Use new AES library API
lib/crypto: aescfb: Use new AES library API
crypto: omap - Use new AES library API
crypto: inside-secure - Use new AES library API
crypto: drbg - Use new AES library API
crypto: crypto4xx - Use new AES library API
crypto: chelsio - Use new AES library API
crypto: ccp - Use new AES library API
crypto: x86/aes-gcm - Use new AES library API
crypto: arm64/ghash - Use new AES library API
crypto: arm/ghash - Use new AES library API
staging: rtl8723bs: core: Use new AES library API
net: phy: mscc: macsec: Use new AES library API
chelsio: Use new AES library API
Bluetooth: SMP: Use new AES library API
crypto: x86/aes - Remove the superseded AES-NI crypto_cipher
lib/crypto: x86/aes: Add AES-NI optimization
...
|
||
Vladimir Oltean
|
c22ba07c82 |
net: dsa: eliminate local type for tc policers
David Yang is saying that struct flow_action_entry in include/net/flow_offload.h has gained new fields and DSA's struct dsa_mall_policer_tc_entry, derived from that, isn't keeping up. This structure is passed to drivers and they are completely oblivious to the values of fields they don't see. This has happened before, and almost always the solution was to make the DSA layer thinner and use the upstream data structures. Here, the reason why we didn't do that is because struct flow_action_entry :: police is an anonymous structure. That is easily enough fixable, just name those fields "struct flow_action_police" and reference them from DSA. Make the according transformations to the two users (sja1105 and felix): "rate_bytes_per_sec" -> "rate_bytes_ps". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Co-developed-by: David Yang <mmyangfl@gmail.com> Signed-off-by: David Yang <mmyangfl@gmail.com> Link: https://patch.msgid.link/20260206075427.44733-1-mmyangfl@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Jiayuan Chen
|
81b84de32b |
xfrm: fix ip_rt_bug race in icmp_route_lookup reverse path
icmp_route_lookup() performs multiple route lookups to find a suitable
route for sending ICMP error messages, with special handling for XFRM
(IPsec) policies.
The lookup sequence is:
1. First, lookup output route for ICMP reply (dst = original src)
2. Pass through xfrm_lookup() for policy check
3. If blocked (-EPERM) or dst is not local, enter "reverse path"
4. In reverse path, call xfrm_decode_session_reverse() to get fl4_dec
which reverses the original packet's flow (saddr<->daddr swapped)
5. If fl4_dec.saddr is local (we are the original destination), use
__ip_route_output_key() for output route lookup
6. If fl4_dec.saddr is NOT local (we are a forwarding node), use
ip_route_input() to simulate the reverse packet's input path
7. Finally, pass rt2 through xfrm_lookup() with XFRM_LOOKUP_ICMP flag
The bug occurs in step 6: ip_route_input() is called with fl4_dec.daddr
(original packet's source) as destination. If this address becomes local
between the initial check and ip_route_input() call (e.g., due to
concurrent "ip addr add"), ip_route_input() returns a LOCAL route with
dst.output set to ip_rt_bug.
This route is then used for ICMP output, causing dst_output() to call
ip_rt_bug(), triggering a WARN_ON:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1275 at ip_rt_bug+0x21/0x30, CPU#1
Call Trace:
<TASK>
ip_push_pending_frames+0x202/0x240
icmp_push_reply+0x30d/0x430
__icmp_send+0x1149/0x24f0
ip_options_compile+0xa2/0xd0
ip_rcv_finish_core+0x829/0x1950
ip_rcv+0x2d7/0x420
__netif_receive_skb_one_core+0x185/0x1f0
netif_receive_skb+0x90/0x450
tun_get_user+0x3413/0x3fb0
tun_chr_write_iter+0xe4/0x220
...
Fix this by checking rt2->rt_type after ip_route_input(). If it's
RTN_LOCAL, the route cannot be used for output, so treat it as an error.
The reproducer requires kernel modification to widen the race window,
making it unsuitable as a selftest. It is available at:
https://gist.github.com/mrpre/eae853b72ac6a750f5d45d64ddac1e81
Reported-by: syzbot+e738404dcd14b620923c@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000b1060905eada8881@google.com/T/
Closes: https://lore.kernel.org/r/20260128090523.356953-1-jiayuan.chen@linux.dev
Fixes:
|
||
Felix Maurer
|
aae9d6b616 |
hsr: Implement more robust duplicate discard for HSR
The HSR duplicate discard algorithm had even more basic problems than the described for PRP in the previous patch. It relied only on the last received sequence number to decide if a new frame should be forwarded to any port. This does not work correctly in any case where frames are received out of order. The linked bug report claims that this can even happen with perfectly fine links due to the order in which incoming frames are processed (which can be unexpected on multi-core systems). The issue also occasionally shows up in the HSR selftests. The main reason is that the sequence number that was last forwarded to the master port may have skipped a number which will in turn never be delivered to the host. As the problem (we accidentally skip over a sequence number that has not been received but will be received in the future) is similar to PRP, we can apply a similar solution. The duplicate discard algorithm based on the "sparse bitmap" works well for HSR if it is extended to track one bitmap for each port (A, B, master, interlink). To do this, change the sequence number blocks to contain a flexible array member as the last member that can keep chunks for as many bitmaps as we need. This design makes it easy to reuse the same algorithm in a potential PRP RedBox implementation. The duplicate discard algorithm functions are modified to deal with sequence number blocks of different sizes and to correctly use the array of bitmap chunks. There is a notable speciality for HSR: the port type has a special port type NONE with value 0. This leads to the number of port types being 5 instead of actually 4. To save memory, remove the NONE port from the bitmap (by subtracting 1) when setting up the block buffer and when accessing the bitmap chunks in the array. Removing the old algorithm allows us to get rid of a few fields that are not needed any more: time_out and seq_out for each port. We can also remove some functions that were only necessary for the previous duplicate discard algorithm. The removal of seq_out is possible despite its previous usage in hsr_register_frame_in: it was used to prevent updates to time_in when "invalid" sequence numbers were received. With the new duplicate discard algorithm, time_in has no relevance for the expiry of sequence numbers anymore. They will expire based on the timestamps in the sequence number blocks after at most 400ms. There is no need that a node "re-registers" to "resume communication": after 400ms, all sequence numbers are accepted again. Also, according to the IEC 62439-3:2021, all nodes are supposed to send no traffic for 500ms after boot to lead exactly to this expiry of seen sequence numbers. time_in is still used for pruning nodes from the node table after no traffic has been received for 60sec. Pruning is only needed if the node is really gone and has not been sending any traffic for that period. seq_out was also used to report the last incoming sequence number from a node through netlink. I am not sure how useful this value is to userspace at all, but added getting it from the sequence number blocks. This number can be outdated after node merging until a new block has been added. Update the KUnit test for the PRP duplicate discard so that the node allocation matches and expectations on the removed fields are removed. Reported-by: Yoann Congal <yoann.congal@smile.fr> Closes: https://lore.kernel.org/netdev/7d221a07-8358-4c0b-a09c-3b029c052245@smile.fr/ Signed-off-by: Felix Maurer <fmaurer@redhat.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/36dc3bc5bdb7e68b70bb5ef86f53ca95a3f35418.1770299429.git.fmaurer@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Felix Maurer
|
415e636751 |
hsr: Implement more robust duplicate discard for PRP
The PRP duplicate discard algorithm does not work reliably with certain
link faults. Especially with packet loss on one link, the duplicate discard
algorithm drops valid packets which leads to packet loss on the PRP
interface where the link fault should in theory be perfectly recoverable by
PRP. This happens because the algorithm opens the drop window on the lossy
link, covering received and lost sequence numbers. If the other, non-lossy
link receives the duplicate for a lost frame, it is within the drop window
of the lossy link and therefore dropped.
Since IEC 62439-3:2012, a node has one sequence number counter for frames
it sends, instead of one sequence number counter for each destination.
Therefore, a node can not expect to receive contiguous sequence numbers
from a sender. A missing sequence number can be totally normal (if the
sender intermittently communicates with another node) or mean a frame was
lost.
The algorithm, as previously implemented in commit
|
||
|
Jiayuan Chen
|
ae88a5d2f2 |
net: atm: fix crash due to unvalidated vcc pointer in sigd_send()
Reproducer available at [1].
The ATM send path (sendmsg -> vcc_sendmsg -> sigd_send) reads the vcc
pointer from msg->vcc and uses it directly without any validation. This
pointer comes from userspace via sendmsg() and can be arbitrarily forged:
int fd = socket(AF_ATMSVC, SOCK_DGRAM, 0);
ioctl(fd, ATMSIGD_CTRL); // become ATM signaling daemon
struct msghdr msg = { .msg_iov = &iov, ... };
*(unsigned long *)(buf + 4) = 0xdeadbeef; // fake vcc pointer
sendmsg(fd, &msg, 0); // kernel dereferences 0xdeadbeef
In normal operation, the kernel sends the vcc pointer to the signaling
daemon via sigd_enq() when processing operations like connect(), bind(),
or listen(). The daemon is expected to return the same pointer when
responding. However, a malicious daemon can send arbitrary pointer values.
Fix this by introducing find_get_vcc() which validates the pointer by
searching through vcc_hash (similar to how sigd_close() iterates over
all VCCs), and acquires a reference via sock_hold() if found.
Since struct atm_vcc embeds struct sock as its first member, they share
the same lifetime. Therefore using sock_hold/sock_put is sufficient to
keep the vcc alive while it is being used.
Note that there may be a race with sigd_close() which could mark the vcc
with various flags (e.g., ATM_VF_RELEASED) after find_get_vcc() returns.
However, sock_hold() guarantees the memory remains valid, so this race
only affects the logical state, not memory safety.
[1]: https://gist.github.com/mrpre/1ba5949c45529c511152e2f4c755b0f3
Fixes:
|
||
|
Linus Torvalds
|
d16738a4e7 |
The kthread code provides an infrastructure which manages the preferred
affinity of unbound kthreads (node or custom cpumask) against housekeeping (CPU isolation) constraints and CPU hotplug events. One crucial missing piece is the handling of cpuset: when an isolated partition is created, deleted, or its CPUs updated, all the unbound kthreads in the top cpuset become indifferently affine to _all_ the non-isolated CPUs, possibly breaking their preferred affinity along the way. Solve this with performing the kthreads affinity update from cpuset to the kthreads consolidated relevant code instead so that preferred affinities are honoured and applied against the updated cpuset isolated partitions. The dispatch of the new isolated cpumasks to timers, workqueues and kthreads is performed by housekeeping, as per the nice Tejun's suggestion. As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set from boot defined domain isolation (through isolcpus=) and cpuset isolated partitions. Housekeeping cpumasks are now modifiable with a specific RCU based synchronization. A big step toward making nohz_full= also mutable through cpuset in the future. -----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEEd76+gtGM8MbftQlOhSRUR1COjHcFAmmE0mYbFIAAAAAABAAO bWFudTIsMi41KzEuMTEsMiwyAAoJEIUkVEdQjox36eMP/0Ls/ArfYVi/MNAXWlpy rAt6m9Y/X9GBcDM/VI9BXq1ZX4qEr2XjJ8UUb8cM08uHEAt0ErlmpRxREwJFrKbI H4jzg5EwO0D0c6MnvgQJEAwkHxQVIjsxG9DovRIjxyW4ycx3aSsRg/f2VKyWoLvY 7ZT7CbLFE+I/MQh2ZgUu/9pnCDQVR2anss2WYIej5mmgFL5pyEv3YvYgKYVyK08z sXyNxpP976g2d9ECJ9OtFJV9we6mlqxlG0MVCiv/Uxh7DBjxWWPsLvlmLAXggQ03 +0GW+nnutDaKz83pgS7Z4zum/+Oa+I1dTLIN27pARUNcMCYip7njM2KNpJwPdov3 +fAIODH2JVX1xewT+U1cCq6gdI55ejbwdQYGFV075dKBUxKQeIyrghvfC3Ga6aKQ Gw3y68jdrXOw6iyfHR5k/0Mnu2/FDKUW2fZxLKm55PvNZP5jQFmSlz9wyiwwyb3m UUSgThj6Ozodxks8hDX41rGVezCcm1ni+qNSiNIs8HPaaZQrwbnvKHQFBBJHQzJP rJ39VWBx3Hq/ly71BOR6pCzoZsfS1f85YKhJ4vsfjLO6BfhI16nBat89eROSRKcz XptyWqW0PgAD0teDuMCTPNuUym/viBHALXHKuSO12CIizacvftiGcmaQNPlLiiFZ /Dr2+aOhwYw3UD6djn3u94M9 =nWGh -----END PGP SIGNATURE----- Merge tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks Pull kthread updates from Frederic Weisbecker: "The kthread code provides an infrastructure which manages the preferred affinity of unbound kthreads (node or custom cpumask) against housekeeping (CPU isolation) constraints and CPU hotplug events. One crucial missing piece is the handling of cpuset: when an isolated partition is created, deleted, or its CPUs updated, all the unbound kthreads in the top cpuset become indifferently affine to _all_ the non-isolated CPUs, possibly breaking their preferred affinity along the way. Solve this with performing the kthreads affinity update from cpuset to the kthreads consolidated relevant code instead so that preferred affinities are honoured and applied against the updated cpuset isolated partitions. The dispatch of the new isolated cpumasks to timers, workqueues and kthreads is performed by housekeeping, as per the nice Tejun's suggestion. As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set from boot defined domain isolation (through isolcpus=) and cpuset isolated partitions. Housekeeping cpumasks are now modifiable with a specific RCU based synchronization. A big step toward making nohz_full= also mutable through cpuset in the future" * tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (33 commits) doc: Add housekeeping documentation kthread: Document kthread_affine_preferred() kthread: Comment on the purpose and placement of kthread_affine_node() call kthread: Honour kthreads preferred affinity after cpuset changes sched/arm64: Move fallback task cpumask to HK_TYPE_DOMAIN sched: Switch the fallback task allowed cpumask to HK_TYPE_DOMAIN kthread: Rely on HK_TYPE_DOMAIN for preferred affinity management kthread: Include kthreadd to the managed affinity list kthread: Include unbound kthreads in the managed affinity list kthread: Refine naming of affinity related fields PCI: Remove superfluous HK_TYPE_WQ check sched/isolation: Remove HK_TYPE_TICK test from cpu_is_isolated() cpuset: Remove cpuset_cpu_is_isolated() timers/migration: Remove superfluous cpuset isolation test cpuset: Propagate cpuset isolation update to timers through housekeeping cpuset: Propagate cpuset isolation update to workqueue through housekeeping PCI: Flush PCI probe workqueue on cpuset isolated partition change sched/isolation: Flush vmstat workqueues on cpuset isolated partition change sched/isolation: Flush memcg workqueues on cpuset isolated partition change cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset ... |
||
Daniel Hodges
|
dd2fdc3504 |
SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Commit |
||
Chenguang Zhao
|
afb24505ff |
SUNRPC: Change list definition method
The LIST_HEAD macro can both define a linked list and initialize it in one step. To simplify code, we replace the separate operations of linked list definition and manual initialization with the LIST_HEAD macro. Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> |
||
|
Linus Torvalds
|
698749164a |
audit/stable-7.0 PR 20260203
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmmCuoQUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMRFhAAntv4vmqRciFI4oEqxi5X8wmYmzc9 BUQV2XXcfO63IOHdGrXmYHByx3+mZZddAPpYMTqrzA0p2NCqi4svCVwspUHwUcTY btl+xlppBJpBtUL5pmLiP6Q4u+zURYCwuA/OKfxuKa5Frm8D3kbkd5MpxJS15Mev qqEhLT0aj6/rjQpYVwOFGMwehKfE7iuyc8XTBaetvUKHW38sj18ANSpLnN5bmiuE 3lz252kCjyDoOsu+vO0Saa8Rv8lVDjlSMn6mYr4L2fVygYwFDg2Gj7+bmB6LGYy9 YyIm6P+b23E8GOltEObpvrz8ItPR7nvKNiDMEeP1eqGzQ/Mc5OqqljVaNMNPmP+s XN/jZt02XePKXlje+C08620mDVeIYp35TK1bY2/HrYMqySE0wwO1iSyBI4ftPFtu CteM8XA8oH49pspFWbEKCHmtFFGxDVjfVM7YrHeDc+qw2tJjZ7R1GRk5hadP1Ou7 emxGLb6jfejT6NMNU8rM2RVmQNs1jcFh+8lHvDgqqQmaCXJd3AEgr+Om5w9kZ6fJ FyEkh0f9HuZdcEn8tqWaIwCAZXTzECOThj6hhxZGiG9xXFXza1eIXxq7VtIE6fdO ATAJ6cpcj0LIQmE7QWntS1NloPkWD1OSiWLNis0AgCiN97oRTk0oFJ5q7fD0bLUa HGAQqd4OJKmNciw= =pFeD -----END PGP SIGNATURE----- Merge tag 'audit-pr-20260203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: - Improve the NETFILTER_PKT audit records Add source and destination ports to the NETFILTER_PKT audit records while also consolidating a lot of the code into a new, singular audit_log_nf_skb() function. This new approach to structuring the NETFILTER_PKT record generation should eliminate some unnecessary overhead when audit is not built into the kernel. - Update the audit syscall classifier code Add the listxattrat(), getxattrat(), and fchmodat2() syscall to the audit code which classifies syscalls into categories of operations, e.g. "read" or "change attributes". - Move the syscall classifier declarations into audit_arch.h Shuffle around some header file declarations to resolve some sparse warnings. * tag 'audit-pr-20260203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: move the compat_xxx_class[] extern declarations to audit_arch.h audit: add missing syscalls to read class audit: include source and destination ports to NETFILTER_PKT audit: add audit_log_nf_skb helper function audit: add fchmodat2() to change attributes class |
||
Ilya Dryomov
|
8356b4b110 |
libceph: adapt ceph_x_challenge_blob hashing and msgr1 message signing
The existing approach where ceph_x_challenge_blob is encrypted with the client's secret key and then the digest derived from the ciphertext is used for the test doesn't work with CEPH_CRYPTO_AES256KRB5 because the confounder randomizes the ciphertext: the client and the server get two different ciphertexts and therefore two different digests. msgr1 signatures are affected the same way: a digest derived from the ciphertext for the message's "sigblock" is what becomes a signature and the two sides disagree on the expected value. For CEPH_CRYPTO_AES256KRB5 (and potential future encryption schemes), switch to HMAC-SHA256 function keyed in the same way as the existing encryption. For CEPH_CRYPTO_AES, everything is preserved as is. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
|
Ilya Dryomov
|
b7cc142dba |
libceph: add support for CEPH_CRYPTO_AES256KRB5
This is based on AES256-CTS-HMAC384-192 crypto algorithm per RFC 8009 (i.e. Kerberos 5, hence the name) with custom-defined key usage numbers. The implementation allows a given key to have/be linked to between one and three usage numbers. The existing CEPH_CRYPTO_AES remains in place and unchanged. The usage_slot parameter that needed to be added to ceph_crypt() and its wrappers is simply ignored there. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
|
Ilya Dryomov
|
6cec0b61aa |
libceph: introduce ceph_crypto_key_prepare()
In preparation for bringing in a new encryption scheme/key type, decouple decoding or cloning the key from allocating required crypto API objects and setting them up. The rationale is that a) in some cases a shallow clone is sufficient and b) ceph_crypto_key_prepare() may grow additional parameters that would be inconvenient to provide at the point the key is originally decoded. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
|
Ilya Dryomov
|
0ee8bccf73 |
libceph: generalize ceph_x_encrypt_offset() and ceph_x_encrypt_buflen()
- introduce the notion of a data offset for ceph_x_encrypt_offset() to allow for e.g. confounder to be prepended before the encryption header in the future. For CEPH_CRYPTO_AES, the data offset is 0 (i.e. nothing is prepended). - adjust ceph_x_encrypt_buflen() accordingly and make it account for PKCS#7 padding that is used by CEPH_CRYPTO_AES precisely instead of just always adding 16. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
|
Ilya Dryomov
|
ac431d597a |
libceph: define and enforce CEPH_MAX_KEY_LEN
When decoding the key, verify that the key material would fit into a fixed-size buffer in process_auth_done() and generally has a sane length. The new CEPH_MAX_KEY_LEN check replaces the existing check for a key with no key material which is a) not universal since CEPH_CRYPTO_NONE has to be excluded and b) doesn't provide much value since a smaller than needed key is just as invalid as no key -- this has to be handled elsewhere anyway. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> |
||
Tetsuo Handa
|
4efa91a285 |
xfrm: always flush state and policy upon NETDEV_UNREGISTER event
syzbot is reporting that "struct xfrm_state" refcount is leaking.
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2
ref_tracker: netdev@ffff888052f24618 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_tracker_alloc include/linux/netdevice.h:4412 [inline]
xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316
xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline]
xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022
xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507
netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550
xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592
___sys_sendmsg+0x134/0x1d0 net/socket.c:2646
__sys_sendmsg+0x16d/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This is because commit
|