Two core changes and the rest in drivers, one core change to quirk the
behaviour of the Iomega Zip drive and one to fix a hang caused by tag
reallocation problems, which has mostly been seen by the iscsi client.
Note the latter fixes the problem but still has a slight sysfs memory
leak, so will be amended in the next pull request (once we've run the
fix for the fix through our testing).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaaxT0hsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIVmDwD+P17JCAk+Ju0aNSnjEmIjUC2oI1S+9GdO
thbkK99vClABAOOkDvHopBBhfsilTpHBYjWFM34vC/iiaO/xfgd9YH2A
=kIDx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core changes and the rest in drivers, one core change to quirk the
behaviour of the Iomega Zip drive and one to fix a hang caused by tag
reallocation problems, which has mostly been seen by the iscsi client.
Note the latter fixes the problem but still has a slight sysfs memory
leak, so will be amended in the next pull request (once we've run the
fix for the fix through our testing)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Fix recursive locking in __configfs_open_file()
scsi: devinfo: Add BLIST_SKIP_IO_HINTS for Iomega ZIP
scsi: mpi3mr: Clear reset history on ready and recheck state after timeout
scsi: core: Fix refcount leak for tagset_refcnt
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCaav3pBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIACgkQgFxhu0/YY75xWwD+NO/7WX01zcYSFMHTjHRx
okbOkBwFzcZK+p/L4iTtVv0BAIYPUpa+RBLR2RtYN7mQEw8KO5yVgiLP2nlQYwIf
wZcH
=DrUe
-----END PGP SIGNATURE-----
Merge tag 'for-linus-7.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a cleanup of arch/x86/kernel/head_64.S removing the pre-built page
tables for Xen guests
- a small comment update
- another cleanup for Xen PVH guests mode
- fix an issue with Xen PV-devices backed by driver domains
* tag 'for-linus-7.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: better handle backend crash
xenbus: add xenbus_device parameter to xenbus_read_driver_state()
x86/PVH: Use boot params to pass RSDP address in start_info page
x86/xen: update outdated comment
xen/acpi-processor: fix _CST detection using undersized evaluation buffer
x86/xen: Build identity mapping page tables dynamically for XENPV
In order to prepare checking the xenbus device status in
xenbus_read_driver_state(), add the pointer to struct xenbus_device
as a parameter.
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: "Martin K. Petersen" <martin.petersen@oracle.com> # SCSI
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/xen-pcifront.c
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260218095205.453657-2-jgross@suse.com>
The Iomega ZIP 100 (Z100P2) can't process IO Advice Hints Grouping mode
page query. It immediately switches to the status phase 0xb8 after
receiving the subpage code 0x05 of MODE_SENSE_10 command, which fails
imm_out() and turns into DID_ERROR of this command, which leads to unusable
device. This was tested with an Iomega ZIP 100 (Z100P2) connected with a
StarTech PEX1P2 AX99100 PCIe parallel port card.
Prior to this fix, Test Unit Ready fails and the drive can't be used:
IMM: returned SCSI status b8
sd 7:0:6:0: [sdh] Test Unit Ready failed: Result: hostbyte=0x01 driverbyte=DRIVER_OK
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/20260227181823.892932-1-fuchsfl@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver retains reset history even after the IOC has successfully
reached the READY state. That leaves stale reset information active during
normal operation and can mislead recovery and diagnostics. In addition, if
the IOC becomes READY just as the ready timeout loop exits, the driver
still follows the failure path and may retry or report failure incorrectly.
Clear reset history once READY is confirmed so driver state matches actual
IOC status. After the timeout loop, recheck the IOC state and treat READY
as success instead of failing.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260225082622.82588-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This leak will cause a hang when tearing down the SCSI host. For example,
iscsid hangs with the following call trace:
[130120.652718] scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured
PID: 2528 TASK: ffff9d0408974e00 CPU: 3 COMMAND: "iscsid"
#0 [ffffb5b9c134b9e0] __schedule at ffffffff860657d4
#1 [ffffb5b9c134ba28] schedule at ffffffff86065c6f
#2 [ffffb5b9c134ba40] schedule_timeout at ffffffff86069fb0
#3 [ffffb5b9c134bab0] __wait_for_common at ffffffff8606674f
#4 [ffffb5b9c134bb10] scsi_remove_host at ffffffff85bfe84b
#5 [ffffb5b9c134bb30] iscsi_sw_tcp_session_destroy at ffffffffc03031c4 [iscsi_tcp]
#6 [ffffb5b9c134bb48] iscsi_if_recv_msg at ffffffffc0292692 [scsi_transport_iscsi]
#7 [ffffb5b9c134bb98] iscsi_if_rx at ffffffffc02929c2 [scsi_transport_iscsi]
#8 [ffffb5b9c134bbf0] netlink_unicast at ffffffff85e551d6
#9 [ffffb5b9c134bc38] netlink_sendmsg at ffffffff85e554ef
Fixes: 8fe4ce5836 ("scsi: core: Fix a use-after-free")
Cc: stable@vger.kernel.org
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223232728.93350-1-junxiao.bi@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The (struct vnic_dev).linkstatus buffer is freed in svnic_dev_unregister()
and referenced in svnic_dev_link_status() but never alloc'd. This means
(struct vnic_dev).linkstatus is always null and the dealloc the reference
in svnic_dev_link_status() is dead code.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Acked-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20260216141056.59429-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit e29c47fe89 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled.
Fixes: e29c47fe89 ("scsi: pm8001: Simplify pm8001_task_exec()")
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260213192806.439432-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver encountered a crash during resource cleanup when the reply and
request queues were NULL due to freed memory. This issue occurred when the
creation of reply or request queues failed, and the driver freed the memory
first, but attempted to mem set the content of the freed memory, leading to
a system crash.
Add NULL pointer checks for reply and request queues before accessing the
reply/request memory during cleanup
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260212070026.30263-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On a multipath SAS system some devices don't end up with correct symlinks
from the SCSI device to its enclosure. Some devices even have enclosure
links pointing to enclosures attached to different SCSI hosts.
ses_match_to_enclosure() calls enclosure_for_each_device() which iterates
over all enclosures on the system, not just enclosures attached to the
current SCSI host.
Replace the iteration with a direct call to ses_enclosure_find_by_addr().
Reviewed-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20260210191850.36784-1-thenzl@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Using set_memory_wc() to enable write-combining for the DPP portion of
the MMIO mapping is wrong as set_memory_*() is meant to operate on RAM
only, not MMIO mappings. In fact, as used currently triggers a BUG_ON()
with enabled CONFIG_DEBUG_VIRTUAL.
Simply map the DPP region separately and in addition to the already
existing mappings, avoiding any possible negative side effects for
these.
Fixes: 1351e69fc6 ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Link: https://patch.msgid.link/20260212192327.141104-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- in order support in virtio core
- multiple address space support in vduse
- fixes, cleanups all over the place, notably
- dma alignment fixes for non cache coherent systems
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmmO9rYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpBzYH/2wUPo3T8/CKGFjF7QSPzgL/UI2NhnP8iSm4
btg1zVnrWmJK6vVIwnf5UsG8dFKsMcp/BEGCewTmIddNM2wEeSul0kKDXtIzrK/U
jdA9bJrUKLMeU7IFKne1Fip/yE+5nkWJttWXXyVRJtOJrYxZlkWfqSns3qYcPvsG
g7HXvF6tmici5uoKdRCLqHtQCWsvpnvTD5A7qoZAlEUjlQCDKKmuukpN9oK5UYLl
9uUOgPQAJaxIwx1C4uP7L+AwbLUcN/+MtrvQRNz+sFpP3sN9oXeDJKBpNQp109NB
JGk1sUsINL+54Cmdd5RwZ9T1vBJyRDrdWRDy1yHj95LildaPfh0=
=pnob
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- in-order support in virtio core
- multiple address space support in vduse
- fixes, cleanups all over the place, notably dma alignment fixes for
non-cache-coherent systems
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits)
vduse: avoid adding implicit padding
vhost: fix caching attributes of MMIO regions by setting them explicitly
vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr()
vdpa/mlx5: reuse common function for MAC address updates
vdpa/mlx5: update mlx_features with driver state check
crypto: virtio: Replace package id with numa node id
crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req
crypto: virtio: Add spinlock protection with virtqueue notification
Documentation: Add documentation for VDUSE Address Space IDs
vduse: bump version number
vduse: add vq group asid support
vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls
vduse: take out allocations from vduse_dev_alloc_coherent
vduse: remove unused vaddr parameter of vduse_domain_free_coherent
vduse: refactor vdpa_dev_add for goto err handling
vhost: forbid change vq groups ASID if DRIVER_OK is set
vdpa: document set_group_asid thread safety
vduse: return internal vq group struct as map token
vduse: add vq group support
vduse: add v1 API definition
...
Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes. The biggest core change is the massive code
motion in the sd driver to remove forward declarations and the most
significant change is to enumify the queuecommand return.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaY4ljBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIWFlwEAr9nc1ntxH4UNPgFCVjKyAOa5IE+p5o5C
2lwQIufcihEBAORvI9KO6AoEK6v9TmMKZXoyVsDRFe79fQE5NwCjfAA3
=My8f
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
- Bus:
- Ensure bus->match() is consistently called with the device lock held
- Improve type safety of bus_find_device_by_acpi_dev()
- Devtmpfs:
- Parse 'devtmpfs.mount=' boot parameter with kstrtoint() instead of
simple_strtoul()
- Avoid sparse warning by making devtmpfs_context_ops static
- IOMMU:
- Do not register the qcom_smmu_tbu_driver in arm_smmu_device_probe()
- MAINTAINERS:
- Add the new driver-core mailing list (driver-core@lists.linux.dev)
to all relevant entries
- Add missing tree location for "FIRMWARE LOADER (request_firmware)"
- Add driver-model documentation to the "DRIVER CORE" entry
- Add missing driver-core maintainers to the "AUXILIARY BUS" entry
- Misc:
- Change return type of attribute_container_register() to void; it has
always been infallible
- Do not export sysfs_change_owner(), sysfs_file_change_owner() and
device_change_owner()
- Move devres_for_each_res() from the public devres header to
drivers/base/base.h
- Do not use a static struct device for the faux bus; allocate it
dynamically
- Revocable:
- Patches for the revocable synchronization primitive have been
scheduled for v7.0-rc1, but have been reverted as they need some
more refinement
- Rust:
- Device:
- Support dev_printk on all device types, not just the core Device
struct; remove now-redundant .as_ref() calls in dev_* print calls
- Devres:
- Introduce an internal reference count in Devres<T> to avoid a
deadlock condition in case of (indirect) nesting
- DMA:
- Allow drivers to tune the maximum DMA segment size via
dma_set_max_seg_size()
- I/O:
- Introduce the concept of generic I/O backends to handle different
kinds of device shared memory through a common interface.
This enables higher-level concepts such as register abstractions,
I/O slices, and field projections to be built generically on top.
In a first step, introduce the Io, IoCapable<T>, and IoKnownSize
trait hierarchy for sharing a common interface supporting offset
validation and bound-checking logic between I/O backends.
- Refactor MMIO to use the common I/O backend infrastructure
- Misc:
- Add __rust_helper annotations to C helpers for inlining into Rust
code
- Use "kernel vertical" style for imports
- Replace kernel::c_str! with C string literals
- Update ARef imports to use sync::aref
- Use pin_init::zeroed() for struct auxiliary_device_id and debugfs
file_operations initialization
- Use LKMM atomic types in debugfs doc-tests
- Various minor comment and documentation fixes
- PCI:
- Implement PCI configuration space accessors using the common I/O
backend infrastructure
- Document pci::Bar device endianness assumptions
- SoC:
- Abstractions for struct soc_device and struct soc_device_attribute
- Sample driver for soc::Device
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaY0JegAKCRBFlHeO1qrK
LtCjAQDeSqGuzQM6hkMjsUWbjdWyw0yrrXcOxhwIINTc7uCzogEA7JL00+eiKHYu
SV2Ckn6UnSQ14rpEaDIzgZdurZHGUAM=
=TL00
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Bus:
- Ensure bus->match() is consistently called with the device lock
held
- Improve type safety of bus_find_device_by_acpi_dev()
Devtmpfs:
- Parse 'devtmpfs.mount=' boot parameter with kstrtoint() instead of
simple_strtoul()
- Avoid sparse warning by making devtmpfs_context_ops static
IOMMU:
- Do not register the qcom_smmu_tbu_driver in arm_smmu_device_probe()
MAINTAINERS:
- Add the new driver-core mailing list (driver-core@lists.linux.dev)
to all relevant entries
- Add missing tree location for "FIRMWARE LOADER (request_firmware)"
- Add driver-model documentation to the "DRIVER CORE" entry
- Add missing driver-core maintainers to the "AUXILIARY BUS" entry
Misc:
- Change return type of attribute_container_register() to void; it
has always been infallible
- Do not export sysfs_change_owner(), sysfs_file_change_owner() and
device_change_owner()
- Move devres_for_each_res() from the public devres header to
drivers/base/base.h
- Do not use a static struct device for the faux bus; allocate it
dynamically
Revocable:
- Patches for the revocable synchronization primitive have been
scheduled for v7.0-rc1, but have been reverted as they need some
more refinement
Rust:
- Device:
- Support dev_printk on all device types, not just the core Device
struct; remove now-redundant .as_ref() calls in dev_* print
calls
- Devres:
- Introduce an internal reference count in Devres<T> to avoid a
deadlock condition in case of (indirect) nesting
- DMA:
- Allow drivers to tune the maximum DMA segment size via
dma_set_max_seg_size()
- I/O:
- Introduce the concept of generic I/O backends to handle
different kinds of device shared memory through a common
interface.
This enables higher-level concepts such as register
abstractions, I/O slices, and field projections to be built
generically on top.
In a first step, introduce the Io, IoCapable<T>, and IoKnownSize
trait hierarchy for sharing a common interface supporting offset
validation and bound-checking logic between I/O backends.
- Refactor MMIO to use the common I/O backend infrastructure
- Misc:
- Add __rust_helper annotations to C helpers for inlining into
Rust code
- Use "kernel vertical" style for imports
- Replace kernel::c_str! with C string literals
- Update ARef imports to use sync::aref
- Use pin_init::zeroed() for struct auxiliary_device_id and
debugfs file_operations initialization
- Use LKMM atomic types in debugfs doc-tests
- Various minor comment and documentation fixes
- PCI:
- Implement PCI configuration space accessors using the common I/O
backend infrastructure
- Document pci::Bar device endianness assumptions
- SoC:
- Abstractions for struct soc_device and struct soc_device_attribute
- Sample driver for soc::Device"
* tag 'driver-core-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (79 commits)
rust: devres: fix race condition due to nesting
rust: dma: add missing __rust_helper annotations
samples: rust: pci: Remove some additional `.as_ref()` for `dev_*` print
Revert "revocable: Revocable resource management"
Revert "revocable: Add Kunit test cases"
Revert "selftests: revocable: Add kselftest cases"
driver core: remove device_change_owner() export
sysfs: remove exports of sysfs_*change_owner()
driver core: disable revocable code from build
revocable: Add KUnit test for concurrent access
revocable: fix SRCU index corruption by requiring caller-provided storage
revocable: Add KUnit test for provider lifetime races
revocable: Fix races in revocable_alloc() using RCU
driver core: fix inverted "locked" suffix of driver_match_device()
rust: io: move MIN_SIZE and io_addr_assert to IoKnownSize
rust: pci: re-export ConfigSpace
rust: dma: allow drivers to tune max segment size
gpu: tyr: remove redundant `.as_ref()` for `dev_*` print
rust: auxiliary: use `pin_init::zeroed()` for device ID
rust: debugfs: use pin_init::zeroed() for file_operations
...
- Add the missing IRQF_COND_ONESHOT flag to devm_request_irq()
This is inconsistent vs. request_irq() and causes the same issues which
where addressed with the introduction of this flag
- Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage
Quite some drivers have inconsistent interrupt request flags related to
interrupt threading namely IRQF_ONESHOT and IRQF_NO_THREAD. This leads to
warnings and/or malfunction when forced interrupt threading is enabled.
- Remove stub primary (hard interrupt) handlers
A bunch of drivers implement a stub primary (hard interrupt) handler which
just returns IRQ_WAKE_THREAD. The same functionality is provided by the
core code when the primary handler argument of request_thread_irq() is set
to NULL.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmmJs8MQHHRnbHhAa2Vy
bmVsLm9yZwAKCRCmGPVMDXSYoTbvEACH4OegGofKri7aecUPNcpRdQDHBoueikni
Rio/vydFJ/H2hto4xlSPC4C84onxuFqY9lJgo/tCQTCrO0t+ZQ4ZGqnlQKzLJzmv
vcVzNgGsxDZ0p1wJO0rBpTRxJN8yTXi8VVv5e6OPuihjLhdXGesyYtk1zosR3nOS
CF/w8r9jVMzsSMPvtEMr5AwXD9ZTziUqyhQv94fYlpsbyD4TPXnUxhVkdUFFHHo3
ROzWPFw1Ykh6wpdRPEpupcCf1d2Pq0TIAU86y3Sbf2msuXiTouHf+lH1uTd3EsLN
6qUIqRYjwWE8HTieh+3YcH415wrIsUsWJb8YDi0DpqhPbja3IXP5ACHqEWaaNHRA
MaBE2Gc02se4ChXMWncYR3cdzyAAwAeKLUahpLNc+7U4cHOm1w2g60yy4I0v2krh
V0vfEN88WQ8DgrM0VvDLST6ZinSz4ia+R0qYWywl6eIW4RVNtuBi6wrN5PtzSEtz
jZ3LqnRLGmNfKwS/taHBCAme7NIJSNa1L0ao/icnW5XVQz/d2EHVcUsLHecHZSMx
l9tr/g3t85tsFW1eIKfF8T1a5DrbCEP4afceQk9KexAfAkP7el53M1E1yQDk/kW8
so0CwZtbDJ136RQdBIQqx49QrUEOvtrgNDRQxPFBUrWEHcvjqbUuFclp9hpLheOj
8YnzkVe0Rg==
=vrmm
-----END PGP SIGNATURE-----
Merge tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A series of treewide cleanups to ensure interrupt request consistency.
- Add the missing IRQF_COND_ONESHOT flag to devm_request_irq()
This is inconsistent vs request_irq() and causes the same issues
which where addressed with the introduction of this flag
- Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage
Quite some drivers have inconsistent interrupt request flags
related to interrupt threading namely IRQF_ONESHOT and
IRQF_NO_THREAD. This leads to warnings and/or malfunction when
forced interrupt threading is enabled.
- Remove stub primary (hard interrupt) handlers
A bunch of drivers implement a stub primary (hard interrupt)
handler which just returns IRQ_WAKE_THREAD. The same functionality
is provided by the core code when the primary handler argument of
request_thread_irq() is set to NULL"
* tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
media: pci: mg4b: Use IRQF_NO_THREAD
mfd: wm8350-core: Use IRQF_ONESHOT
thermal/qcom/lmh: Replace IRQF_ONESHOT with IRQF_NO_THREAD
rtc: amlogic-a4: Remove IRQF_ONESHOT
usb: typec: fusb302: Remove IRQF_ONESHOT
EDAC/altera: Remove IRQF_ONESHOT
char: tpm: cr50: Remove IRQF_ONESHOT
ARM: versatile: Remove IRQF_ONESHOT
scsi: efct: Use IRQF_ONESHOT and default primary handler
Bluetooth: btintel_pcie: Use IRQF_ONESHOT and default primary handler
bus: fsl-mc: Use default primary handler
mailbox: bcm-ferxrm-mailbox: Use default primary handler
iommu/amd: Use core's primary handler and set IRQF_ONESHOT
platform/x86: int0002: Remove IRQF_ONESHOT from request_irq()
genirq: Set IRQF_COND_ONESHOT in devm_request_irq().
-----BEGIN PGP SIGNATURE-----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=jNzW
-----END PGP SIGNATURE-----
Merge tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Support for batch request processing for ublk, improving the
efficiency of the kernel/ublk server communication. This can yield
nice 7-12% performance improvements
- Support for integrity data for ublk
- Various other ublk improvements and additions, including a ton of
selftests additions and updated
- Move the handling of blk-crypto software fallback from below the
block layer to above it. This reduces the complexity of dealing with
bio splitting
- Series fixing a number of potential deadlocks in blk-mq related to
the queue usage counter and writeback throttling and rq-qos debugfs
handling
- Add an async_depth queue attribute, to resolve a performance
regression that's been around for a qhilw related to the scheduler
depth handling
- Only use task_work for IOPOLL completions on NVMe, if it is necessary
to do so. An earlier fix for an issue resulted in all these
completions being punted to task_work, to guarantee that completions
were only run for a given io_uring ring when it was local to that
ring. With the new changes, we can detect if it's necessary to use
task_work or not, and avoid it if possible.
- rnbd fixes:
- Fix refcount underflow in device unmap path
- Handle PREFLUSH and NOUNMAP flags properly in protocol
- Fix server-side bi_size for special IOs
- Zero response buffer before use
- Fix trace format for flags
- Add .release to rnbd_dev_ktype
- MD pull requests via Yu Kuai
- Fix raid5_run() to return error when log_init() fails
- Fix IO hang with degraded array with llbitmap
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
- Fix GPF in write_page caused by resize race
- Fix NULL pointer dereference in process_metadata_update
- Fix hang when stopping arrays with metadata through dm-raid
- Fix any_working flag handling in raid10_sync_request
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field
- Consolidate mddev boolean fields into mddev_flags
- Use mempool to allocate stripe_request_ctx and make sure
max_sectors is not less than io_opt in raid5
- Fix return value of mddev_trylock
- Fix memory leak in raid1_run()
- Add Li Nan as mdraid reviewer
- Move phys_vec definitions to the kernel types, mostly in preparation
for some VFIO and RDMA changes
- Improve the speed for secure erase for some devices
- Various little rust updates
- Various other minor fixes, improvements, and cleanups
* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
blk-mq: ABI/sysfs-block: fix docs build warnings
selftests: ublk: organize test directories by test ID
block: decouple secure erase size limit from discard size limit
block: remove redundant kill_bdev() call in set_blocksize()
blk-mq: add documentation for new queue attribute async_dpeth
block, bfq: convert to use request_queue->async_depth
mq-deadline: covert to use request_queue->async_depth
kyber: covert to use request_queue->async_depth
blk-mq: add a new queue sysfs attribute async_depth
blk-mq: factor out a helper blk_mq_limit_depth()
blk-mq-sched: unify elevators checking for async requests
block: convert nr_requests to unsigned int
block: don't use strcpy to copy blockdev name
blk-mq-debugfs: warn about possible deadlock
blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
blk-rq-qos: fix possible debugfs_mutex deadlock
blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
...
The error exit path when rn is NULL ends up deferencing the null pointer rn
via the use of the macro CSIO_INC_STATS. Fix this by adding a new error
return path label after the use of the macro to avoid the deference.
Fixes: a3667aaed5 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20260129155332.196338-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some randconfig builds run into excessive stack usage with gcc-14 or
higher, which use __attribute__((cold)) where earlier versions did not do
that:
drivers/scsi/BusLogic.c: In function 'blogic_init':
drivers/scsi/BusLogic.c:2398:1: error: the frame size of 1680 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
The problem is that a lot of code gets inlined into blogic_init() here. Two
functions stick out, but they are a bit different:
- blogic_init_probeinfo_list() actually uses a few hundred bytes of kernel
stack, which is a problem in combination with other functions that also
do. Marking this one as noinline means that the stack slots get get
reused between function calls
- blogic_reportconfig() has a few large variables, but whenever it is not
inlined into its caller, the compiler is actually smart enough to reuse
stack slots for these automatically, so marking it as noinline saves
most of the stack space by itself.
The combination of both of these should avoid the problem entirely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260203163321.2598593-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pqi_report_phys_luns() fails to release the rpl_list buffer when
encountering an unsupported data format or when the allocation for
rpl_16byte_wwid_list fails. These early returns bypass the cleanup logic,
leading to memory leaks.
Consolidate the error handling by adding an out_free_rpl_list label and use
goto statements to ensure rpl_list is consistently freed on failure.
Compile tested only. Issue found using a prototype static analysis tool and
code review.
Fixes: 28ca6d876c ("scsi: smartpqi: Add extended report physical LUNs")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Tested-by: Don Brace <don.brace@microchip.com>
Acked-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20260131093641.1008117-1-zilin@seu.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Speed up the boot process by using the asynchronous probing feature
supported by the kernel.
Set the PROBE_PREFER_ASYNCHRONOUS flag in the device_driver structure so
that the driver core probes in parallel.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260130080207.90053-1-kanie@linux.alibaba.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no added value in efct_intr_msix() compared to
irq_default_primary_handler().
Using a threaded interrupt without a dedicated primary handler mandates the
IRQF_ONESHOT flag to mask the interrupt source while the threaded handler
is active. Otherwise the interrupt can fire again before the threaded
handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary handler
is done.
Cc: Ram Vegesna <ram.vegesna@broadcom.com>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Fixes: 4df84e8466 ("scsi: elx: efct: Driver initialization routines")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260123113708.416727-8-bigeasy@linutronix.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no added value in efct_intr_msix() compared to
irq_default_primary_handler().
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Use the default primary interrupt handler by specifying NULL and set
IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 4df84e8466 ("scsi: elx: efct: Driver initialization routines")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-8-bigeasy@linutronix.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAml2lQweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0dcH/2yLU3IKlHSSgEDL
Qq3oBuRK/zoVOdy+CM+TmTdl2d1LnBd8J547xFStB7kVGf5mEkdFZdHLBSHRnKDf
ia1SGec06kyLpRX6x5T6FsfwOhkBmVsp59X0coM57QWxxenybugtzPvDO2TQ8/G4
buixJI0jJVgwRwXNzWB4n2W6FxNGui2A7gEN2mjtvkM2t/aDkiDjEqB8ve0pZJX9
4EWhxOgRFzwWgkd/bY+4wgXVXEt3GtI+3VvNncRqLIO00A/AnZOYmH4S2RQUDszD
IbyDscYYxloZcZMDXc3PN2WgD9DCGKuP3GpJGsOHbl0DN6JkqI9nwGsOFZKGVOeF
vbajwPE=
=iAOa
-----END PGP SIGNATURE-----
Merge tag 'v6.19-rc7' into driver-core-next
We need the driver-core fixes in here as well to build on top of.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Earlier in the function, the ha->flt buffer is allocated with size
sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE but freed in the error
path with size SFP_DEV_SIZE.
Fixes: 84318a9f01 ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260112134326.55466-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Marco Crivellari <marco.crivellari@suse.com> says:
Hi,
This series continues the effort to refactor the Workqueue API.
No behavior changes are introduced by this series.
=== Recent changes to the WQ API ===
The following, address the recent changes in the Workqueue API:
- commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
- commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The old workqueues will be removed in a future release cycle and
unbound will become the implicit default.
=== Introduced Changes by this series ===
1) [P 1-2-3] add WQ_PERCPU to alloc_workqueue() users
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
WQ_UNBOUND will be removed in future.
For more information:
https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Link: https://patch.msgid.link/20260113145711.242316-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue() flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly
request WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260113145711.242316-4-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue() flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260113145711.242316-3-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue() flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly
request WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260113145711.242316-2-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Capture and retain firmware fault codes and extended fault information
whenever the controller enters a fault state.
Maintain a persistent firmware fault counter, expose it via sysfs, and
generate uevents to aid userspace diagnostics and failure analysis.
Co-developed-by: Salomon Dushimirimana <salomondush@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-7-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Firmware populates the negotiated SAS link rate in DevicePage0 during
device discovery. Update mpi3mr to cache this value while initializing
the target device.
When available, the cached link rate is used instead of issuing
additional SAS PHY or expander PHY page reads. If the DevicePage0 value
is missing or invalid, the driver falls back to the existing PHY-based
mechanism.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update reset handling to invoke diag-save only for diag-fault resets.
Skip issuing a diagnostic reset if the IOC is already in FAULT state,
preventing repeated fault handling and improving reset stability.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Log data events can be processed from BH and threaded contexts. Rename
the save helper to document its intended usage and improve readability
of the event handling flow.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a module parameter to enable or disable threaded IRQ polling in the
driver. The default behavior remains unchanged with polling enabled.
When disabled, completion processing is kept entirely in the hard IRQ
context, avoiding the threaded polling path.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prevent that a later patch that modifies the qla2xxx_mqueuecommand()
declaration triggers the following checkpatch warning: "externs should
be avoided in .c files".
Cc: Nilesh Javali <njavali@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260115210357.2501991-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
.queuecommand() implementations are expected to return a SCSI_MLQUEUE_*
value. Return SCSI_MLQUEUE_HOST_BUSY from megaraid_queue_command_lck()
instead of 1. This patch doesn't change any functionality since
scsi_dispatch_cmd() converts all return values other than SCSI_MLQUEUE_*
into SCSI_MLQUEUE_HOST_BUSY.
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Cc: megaraidlinux.pdl@broadcom.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
.queuecommand() implementations are expected to return a SCSI_MLQUEUE_*
value. Return SCSI_MLQUEUE_HOST_BUSY from megaraid_queue_lck() instead
of 1. This patch doesn't change any functionality since
scsi_dispatch_cmd() converts all return values other than SCSI_MLQUEUE_*
into SCSI_MLQUEUE_HOST_BUSY.
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Cc: megaraidlinux.pdl@broadcom.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
.queuecommand() implementations are expected to return a SCSI_MLQUEUE_*
value. Return SCSI_MLQUEUE_HOST_BUSY from aha152x_internal_queue()
instead of 0x2003. This patch doesn't change any functionality since
scsi_dispatch_cmd() converts all return values other than SCSI_MLQUEUE_*
into SCSI_MLQUEUE_HOST_BUSY.
Cc: Juergen E. Fischer <fischer@norbit.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260115210357.2501991-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
