This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
- Core
- Add suuport for "rx-polarity" and "tx-polarity" device tree properties
and phy common properties to manage this
- New Support
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy support, USB
UNI PHY support and SMB2370 eUSB2 repeater support. SC8280xp QMP UFS PHY
support, Kaanapali PCIe phy and QMP PHY support, QCS615 QMP USB3+DP PHY
and driver support for that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver.
- TI TCAN1046 phy support.
- Renesas RZ/V2H(P) and RZ/V2N usb3 support
- Mediatek MT8188 hdmi-phy support
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY support
- Updates
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support
-----BEGIN PGP SIGNATURE-----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=6ibD
-----END PGP SIGNATURE-----
Merge tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"Core:
- Add suuport for "rx-polarity" and "tx-polarity" device tree
properties and phy common properties to manage this
New Support:
- Qualcomm Glymur PCIe Gen4 2-lanes PCIe phy, DP and edp phy, USB UNI
PHY and SMB2370 eUSB2 repeater. SC8280xp QMP UFS PHY, Kaanapali
PCIe phy and QMP PHY, QCS615 QMP USB3+DP PHY and driver support for
that.
- SpacemiT PCIe/combo PHY and K1 USB2 PHY driver.
- HDMI 2.1 FRL configuration support and driver enabling for rockchip
samsung-hdptx driver
- TI TCAN1046 phy
- Renesas RZ/V2H(P) and RZ/V2N usb3
- Mediatek MT8188 hdmi-phy
- Google Tensor SoC USB PHY driver
- Apple Type-C PHY
Updates:
- Subsystem conversion for clock round_rate() to determine_rate()
- TI USB3 DT schema conversion
- Samsung ExynosAutov920 usb3, combo hsphy and ssphy support"
* tag 'phy-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (143 commits)
phy: ti: phy-j721e-wiz: convert from divider_round_rate() to divider_determine_rate()
dt-bindings: phy: ti,control-phy-otghs: convert to DT schema
dt-bindings: phy: ti,phy-usb3: convert to DT schema
phy: tegra: xusb: Remove unused powered_on variable
phy: renesas: rcar-gen3-usb2: add regulator dependency
phy: GOOGLE_USB: add TYPEC dependency
phy: enter drivers/phy/Makefile even without CONFIG_GENERIC_PHY
phy: renesas: rcar-gen3-usb2: Use mux-state for phyrst management
phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control
phy: renesas: rcar-gen3-usb2: Use devm_pm_runtime_enable()
phy: renesas: rcar-gen3-usb2: Factor out VBUS control logic
dt-bindings: phy: renesas,usb2-phy: Document RZ/G3E SoC
dt-bindings: phy: renesas,usb2-phy: Document mux-states property
dt-bindings: phy: renesas,usb2-phy: Document USB VBUS regulator
phy: rockchip: samsung-hdptx: Add HDMI 2.1 FRL support
phy: rockchip: samsung-hdptx: Extend rk_hdptx_phy_verify_hdmi_config() helper
phy: rockchip: samsung-hdptx: Switch to driver specific HDMI config
phy: rockchip: samsung-hdptx: Drop hw_rate driver data
phy: rockchip: samsung-hdptx: Compute clk rate from PLL config
phy: rockchip: samsung-hdptx: Cleanup *_cmn_init_seq lists
...
The divider_round_rate() function is now deprecated, so let's migrate
to divider_determine_rate() instead so that this deprecated API can be
removed.
Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:
req->rate = divider_round_rate(...)
This is invalid in the case when an error occurs since it can set the
rate to a negative value.
Fixes: 27287e3b52 ("phy: ti: phy-j721e-wiz: convert from round_rate() to determine_rate()")
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://patch.msgid.link/20260108-clk-divider-round-rate-v1-25-535a3ed73bf3@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit bbf711682c ("phy: tegra: xusb: Add Tegra186 support") added the
variable 'powered_on' to the structure 'tegra_xusb_usb2_lane' but it has
never been used. Therefore, remove this unused variable.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260202153314.1634145-1-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver start registering a regulator, but can still be
enabled even when it is unable to call into the regulator
subsystem:
aarch64-linux-ld: drivers/phy/renesas/phy-rcar-gen3-usb2.o: in function `rcar_gen3_phy_usb2_probe':
phy-rcar-gen3-usb2.c:(.text+0x2884): undefined reference to `devm_regulator_register'
Add a Kconfig dependency to avoid this configuration.
Fixes: b6d7dd1577 ("phy: renesas: rcar-gen3-usb2: Add regulator for OTG VBUS control")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260202095118.1233046-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With CONFIG_TYPEC=m, this driver cannot be built-in:
arm-linux-gnueabi/bin/arm-linux-gnueabi-ld: drivers/phy/phy-google-usb.o: in function `google_usb_phy_remove':
phy-google-usb.c:(.text+0x24): undefined reference to `typec_switch_unregister'
Add CONFIG_TYPEC as a hard dependency here to force a clean build.
In theory, compile-testing with CONFIG_TYPEC=n would also work, but
that seems pointless.
Fixes: cbce66669c ("phy: Add Google Tensor SoC USB PHY driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260202095655.1289973-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Kconfig option CONFIG_PHY_COMMON_PROPS, which builds
drivers/phy/phy-common-props.c, was intended to be selectable
independently of CONFIG_GENERIC_PHY. Yet it lives in drivers/phy/, which
is entered by the Makefile only if CONFIG_GENERIC_PHY is set.
Allow the Makefile to enter one level deeper, but stop at drivers/phy/
if CONFIG_GENERIC_PHY is unselected (i.e. do not enter vendor folders).
The other stuff from drivers/phy/Makefile except for CONFIG_PHY_COMMON_PROPS,
like CONFIG_PHY_NXP_PTN3222, all depends on CONFIG_GENERIC_PHY.
Fixes: e7556b59ba ("phy: add phy_get_rx_polarity() and phy_get_tx_polarity()")
Closes: https://lore.kernel.org/lkml/43ea0202-891d-4582-980b-5cb557b41114@linux.ibm.com/
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Debugged-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://patch.msgid.link/20260123110600.3118561-1-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add support for selecting the phyrst mux-state using the Linux mux
subsystem in the R-Car Gen3 USB2 PHY driver. This ensures correct hardware
initialization and integration with systems utilizing the mux-state device
tree property.
A temporary wrapper for optional muxes is introduced until native support
is available in the multiplexer subsystem.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/80aafdb2367dcada720b0a9ebeea344764e710fb.1766405010.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enable OTG VBUS control on R-Car Gen3 USB2 PHY by registering a regulator
driver that manages the VBOUT line. This change allows the controller to
handle VBUS output for OTG ports using the regulator framework when the
platform requires hardware-based VBUS control.
Without this, some platforms cannot properly manage VBUS power on OTG-
capable ports, leading to potential USB functionality issues.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/6c1aebf60b4d8ff0c51a8243c68b397c1a384867.1766405010.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace pm_runtime_enable() with devm_pm_runtime_enable() to ensure proper
cleanup if the probe fails. This change enhances driver reliability by
avoiding resource leaks, as the devm-managed version automatically handles
disabling at probe failure or device removal.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/ca028d41f84227efeccb0cbdff22fbf16e5cf6ab.1766405010.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The PHY is capable of handling four HDMI 2.1 Fixed Rate Link (FRL)
lanes, and each one can operate at any of the rates of 3Gbps, 6Gbps,
8Gbps, 10Gbps or 12Gbps.
Add the necessary driver changes to support the feature.
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-11-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In order to facilitate introduction of HDMI 2.1 FRL support and to avoid
recomputing the link rate after verifying the HDMI configuration given
as input, extend rk_hdptx_phy_verify_hdmi_config() by providing an
optional output parameter to store the validated configuration.
For improved code readability, also rename the existing hdmi input
parameter.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-10-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation to support the FRL operation mode which gets configured
via the lanes and rate per lane tuple, switch to a driver specific
struct for configuring the link rate and bpc.
This simplifies and optimizes the implementation by allowing implicit
switches between TMDS and FRL rates, without requiring additional checks
of the active PHY mode followed by recalculations of the link rate when
operating in FRL mode.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-9-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ->hw_rate member of struct rk_hdptx_phy was mainly used to keep
track of the clock rate programmed in hardware and support implementing
the ->recalc_rate() callback in hdptx_phy_clk_ops.
Computing the clock rate from the actual PHY PLL configuration seems to
work reliably, hence remove the now redundant struct member.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-8-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Improve ->recalc_rate() callback of hdptx_phy_clk_ops to calculate the
initial clock rate based on the actual PHY PLL configuration as
retrieved from the related hardware registers.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-7-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop redundant reg_sequence entries from rk_hdptx_common_cmn_init_seq[],
i.e. those that are either duplicated or overridden in
rk_hdptx_tmds_cmn_init_seq[].
Additionally, a few items do not really belong to the former, hence move
them to the latter. That's mostly a preparatory step for adding FRL
support.
No functional changes intended at this point.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-6-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In preparation to support FRL mode, move the PHY lane output enablement
from the TMDS specific configuration to the common *_post_enable_lane()
helper and make sure it gets turned off in *_phy_disable().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-5-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix the naming inconsistencies for some of the functions and global
variables:
* Add the missing 'rk_hdptx_' prefix to ropll_tmds_cfg variable
* Replace '_ropll_tmds_' with '_tmds_ropll_' globally
* Replace 'hdtpx' with 'hdptx' globally
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-4-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Handle a bunch of reported checkpatch.pl complaints:
CHECK: Alignment should match open parenthesis
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-3-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
rk_hdptx_dp_reset() is allowed to sleep, hence replace the busy waiting
with usleep_range(), to allow other threads to run.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-2-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
During the probe the refclk_pad pointer is set to NULL if the
'fsl,refclk-pad-mode' property is not defined in the devicetree node. But
in imx_hsio_configure_clk_pad() this pointer is unconditionally used which
could result in a NULL pointer dereference. So check the pointer before to
use it.
Fixes: 82c56b6dd2 ("phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support")
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://patch.msgid.link/20260114-phy-fsl-imx8qm-hsio-fix-null-pointer-dereference-v1-1-730e941be464@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The problem with the current implementation is that it does not consider
that the USB controller can have multiple PHY handles with different
arguments count, as for example we have in our cn9131 based platform:
"phys = <&cp0_comphy1 0>, <&cp0_utmi0>;".
In such case calling "of_usb_get_dr_mode_by_phy" with -1 (no phy-cells)
leads to not proper phy detection, taking the "marvell,cp110-utmi-phy"
dts definition we can call the "of_usb_get_dr_mode_by_phy" with 0
(#phy-cells = <0>) and safely look for that phy.
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@belden.com>
Link: https://patch.msgid.link/20260106150643.922110-1-aleksandar.gerasimovski@belden.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This is to resolve the problem of wakeup system by USB3 device insertion
if HSIOMIX on, in that case, the USB3 device detects RX term on so the
USB3 device doesn't downgrade to high-speed, we can't expect CONN wakeup
(for USB3) happen because the 24MHz OSC is required ON to trigger it.
Because the device works at Super-speed so DP/DM wakeup can't happen
either. Then the entire systen can't be waken up by such device attach
event.
With this override bit we can force the RX term off when enters system
suspend, and disable the override after system resume. Therefore, the
USB3 device will always downgrade to High-speed, then DP/DM wakeup can
always happen. It will correctly switch to Super-speed later when the
host reset it after the system resume back.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260116101835.1810675-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Disabling PHYs in runtime usually causes the client with external abort
exception or similar issue due to lack of API to notify clients about PHY
removal. This patch removes the possibility to unbind i.MX PHY drivers in
runtime.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260120111712.3159782-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
After U-Boot initializes PCIe with "pcie enum", Linux fails to detect
an NVMe disk on some boot cycles with:
phy phy-32f00000.pcie-phy.0: phy poweron failed --> -110
Discussion with NXP identified that the iMX8MP PCIe PHY PLL may fail to
lock when re-initialized without a reset cycle [1].
The issue reproduces on 7% of tested hardware platforms, with a 30-40%
failure rate per affected device across boot cycles.
Insert a reset cycle in the power-on routine to ensure the PHY is
initialized from a known state.
[1] https://community.nxp.com/t5/i-MX-Processors/iMX8MP-PCIe-initialization-in-U-Boot/m-p/2248437#M242401
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251223150254.1075221-1-rafael@beims.me
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Support the USB PHY found on Google Tensor G5 (Laguna). This
particular USB PHY supports both high-speed and super-speed
operations, and is integrated with the SNPS DWC3 controller that's
also on the SoC. This initial patch specifically adds functionality
for high-speed.
Co-developed-by: Joy Chakraborty <joychakr@google.com>
Signed-off-by: Joy Chakraborty <joychakr@google.com>
Co-developed-by: Naveen Kumar <mnkumar@google.com>
Signed-off-by: Naveen Kumar <mnkumar@google.com>
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://patch.msgid.link/20251227-phyb4-v10-2-e8caf6b93fe7@google.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://patch.msgid.link/20260102124848.64474-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Now that the upstream Type-C PHY code is getting broader test coverage we
got reports of USB devices plugged in during boot or those plugged in for
the first time after boot occasionally not working correctly.
This is partially caused by the USB2 parts of the PHY being left in an
unknown state by the previous boot stages. We reset all other parts during
probe but forgot about the USB2 PHY so let's fix that and actually reset
and power off the USB2 PHY as well.
Reported-by: James Calligeros <jcalligeros99@gmail.com>
Reported-by: Janne Grunau <j@jannau.net>
Fixes: 8e98ca1e74 ("phy: apple: Add Apple Type-C PHY")
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Tested-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20260108-atcphy-coldboot-fix-v1-1-01c41c6e84f2@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The for_each_available_child_of_node() calls of_node_put() to
release child_np in each success loop. After breaking from the
loop with the child_np has been released, the code will jump to
the put_child label and will call the of_node_put() again if the
devm_request_threaded_irq() fails. These cause a double free bug.
Fix by returning directly to avoid the duplicate of_node_put().
Fixes: ed2b5a8e6b ("phy: phy-rockchip-inno-usb2: support muxed interrupts")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260109154626.2452034-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For Glymur SoC support, the com_clk_fwd_cfg callback was added, and a
stub implementation was added for the v4 of the hardware. However it
was omitted for the v6, causing a NULL pointer dereference oops on
Hamoa/Purwa (X1E/X1P) SoC devices. Fix by adding the appropriate stub.
Fixes: add66a6673 ("phy: qcom: edp: Add Glymur platform support")
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Yijie Yang <yijie.yang@oss.qualcomm.com> # Purwa-IoT-EVK
Link: https://patch.msgid.link/20260111083317.604754-1-val@packett.cool
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Vladimir Oltean <vladimir.oltean@nxp.com> wrote:
Introduce "rx-polarity" and "tx-polarity" device tree properties with
Kunit tests
-----BEGIN PGP SIGNATURE-----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=aAVU
-----END PGP SIGNATURE-----
Merge tag 'phy_common_properties' into next
phy common properties
Vladimir Oltean <vladimir.oltean@nxp.com> wrote:
Introduce "rx-polarity" and "tx-polarity" device tree properties with
Kunit tests
Add helpers in the generic PHY folder which can be used using 'select
PHY_COMMON_PROPS' from Kconfig, without otherwise needing to
enable GENERIC_PHY.
These helpers need to deal with the slight messiness of the fact that
the polarity properties are arrays per protocol, and with the fact that
there is no default value mandated by the standard properties, all
default values depend on driver and protocol (PHY_POL_NORMAL may be a
good default for SGMII, whereas PHY_POL_AUTO may be a good default for
PCIe).
Push the supported mask of polarities to these helpers, to simplify
drivers such that they don't need to validate what's in the device tree
(or other firmware description).
Add a KUnit test suite to make sure that the API produces the expected
results. The fact that we use fwnode structures means we can validate
with software nodes, and as opposed to the device_property API, we can
bypass the need to have a device structure.
Co-developed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260111093940.975359-6-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add register sequences for PCIe + XAUI multilink configuration for
100MHz reference clock.
The register sequences are fetched from a table by indexing entries based
on unique 'keys' generated by the Bitwise OR defined below:
REFCLK0_RATE | REFCLK1_RATE | LINK0_TYPE | LINK1_TYPE | SSC_TYPE
As of now, LINK_TYPE is a 3-bit value corresponding to the PHY type.
With the introduction of TYPE_XAUI, we need a 4-bit value to represent
the LINK_TYPE as TYPE_XAUI has the numerical value 8. Hence, extend the
LINKx_MASK macros to 4-bit masks. While at it, extend REFCLKx_MASK macros
as well to 4-bit masks to support reference clock frequencies that will be
added in the future.
Adjust the 'LINKx_SHIFT' and the 'REFCLKx_SHIFT' macros to account for
the aforementioned changes made to the masks.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
[s-vadapalli: elaborated on changes made to macros in the commit message]
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260112054636.108027-3-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On SAR2130P QXR Platform, the CC Lines are inverted and the lane
programming is to be done reverse compared to other targets.
As per the HW specifics, Bit-2 of TYPEC_CTRL register indicates
port select polarity. This bit is to be set for SAR2130P.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017203438.744197-1-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the init sequence tables and config for the UFS QMP phy found in the
Milos SoC.
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260112-milos-ufs-v2-4-d3ce4f61f030@fairphone.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Replace system_wq with system_percpu_wq, keeping the same behavior.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251105152023.259813-1-marco.crivellari@suse.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Qualcomm Glymur platform has the new v8 version of the eDP/DP PHY.
So rework the driver to support this new version and add the platform
specific configuration data.
While at it, add the rest of the AUX_CFG reset values for the v4 and v5
platforms, which makes the handling of the platforms specific array
cleaner, as they are single sized now.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-glymur-support-v6-4-4fcba75a6fa9@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Starting with Glymur, the PCIe and DP PHYs qserdes register offsets differ
for the same version number. So in order to be able to differentiate
between them, add these ones with DP prefix.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-glymur-support-v6-3-4fcba75a6fa9@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On all platforms supported by this driver, there are 13 DP_PHY_AUX_CFGx
registers. This hasn't been an issue so far on currently supported
platforms, because the init sequence never spanned beyond DP_PHY_AUX_CFG9.
However, on the new upcoming Glymur platform, these are updated along
with the rest of the init sequence.
So update the size of the array holding the config to 13.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-glymur-support-v6-2-4fcba75a6fa9@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On X Elite, the DP PHY needs another clock called ref, while all other
platforms do not.
The current X Elite devices supported upstream work fine without this
clock, because the boot firmware leaves this clock enabled. But we should
not rely on that. Also, even though this change breaks the ABI, it is
needed in order to make the driver disables this clock along with the
other ones, for a proper bring-down of the entire PHY.
So in order to handle these clocks on different platforms, make the driver
get all the clocks regardless of how many there are provided.
Cc: stable@vger.kernel.org # v6.10
Fixes: db83c107dc ("phy: qcom: edp: Add v6 specific ops and X1E80100 platform support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20251224-phy-qcom-edp-add-missing-refclk-v5-2-3f45d349b5ac@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
"family" is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
phy-bcm-ns-usb3.c:206:17: error: cast to smaller integer type 'enum bcm_ns_family' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
This was already fixed in commit bd6e74a2f0 ("phy: broadcom: ns-usb3:
fix Wvoid-pointer-to-enum-cast warning") but then got bad in commit
21bf6fc47a ("phy: Use device_get_match_data()").
Note that after various discussions the preferred cast is via "unsigned
long", not "uintptr_t".
Fixes: 21bf6fc47a ("phy: Use device_get_match_data()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251224115533.154162-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
