The default value of the P1 sub-device depends on the value
of P1, so P1 should have a default value here.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Acked-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20251225-p1-kconfig-fix-v4-2-44b6728117c1@linux.spacemit.com
Signed-off-by: Lee Jones <lee@kernel.org>
The RK801 is a Power Management IC (PMIC) for multimedia
and handheld devices. It contains the following components:
- 4 BUCK
- 2 LDO
- 1 SWITCH
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Link: https://patch.msgid.link/20260112124351.17707-3-chenjh@rock-chips.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD72720 is a power management IC which continues the BD71828
family of PMICs. Similarly to the BD71815 and BD71828, the BD72720
integrates regulators, charger, RTC, clock gate and GPIOs.
The main difference to the earlier PMICs is that the BD72720 has two
different I2C slave addresses. In addition to the registers behind the
'main I2C address', most of the charger (and to some extent LED) control
is done via registers behind a 'secondary I2C slave address', 0x4c.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/c7b3f1b25616a0add21cea38019e50a89873b6ac.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This is the only Kconfig symbol that depends on OF while selecting the common
driver for several chips. Drop this unneeded dependency and make the component
available on non-OF systems along with wider compile test.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251111105320.750131-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Nothing seems to prevent this driver from being compile tested so allow
that.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
There are 3 sub-devices for which the drivers will be added in
subsequent patches.
Signed-off-by: Samuel Kayode <samuel.kayode@savoirfairelinux.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20251001-pf1550-v12-2-a3302aa41687@savoirfairelinux.com
Signed-off-by: Lee Jones <lee@kernel.org>
Lots of platform specific updates for Qualcomm SoCs, including a
new TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with the
M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed, Broadcom,
Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0.
-----BEGIN PGP SIGNATURE-----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=mcZR
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Lots of platform specific updates for Qualcomm SoCs, including a new
TEE subsystem driver for the Qualcomm QTEE firmware interface.
Added support for the Apple A11 SoC in drivers that are shared with
the M1/M2 series, among more updates for those.
Smaller platform specific driver updates for Renesas, ASpeed,
Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
SoCs.
Driver updates in the cache controller, memory controller and reset
controller subsystems.
SCMI firmware updates to add more features and improve robustness.
This includes support for having multiple SCMI providers in a single
system.
TEE subsystem support for protected DMA-bufs, allowing hardware to
access memory areas that managed by the kernel but remain inaccessible
from the CPU in EL1/EL0"
* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
soc: fsl: qe: Change GPIO driver to a proper platform driver
tee: fix register_shm_helper()
pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
dt-bindings: spmi: Add Apple A11 and T2 compatible
serial: qcom-geni: Load UART qup Firmware from linux side
spi: geni-qcom: Load spi qup Firmware from linux side
i2c: qcom-geni: Load i2c qup Firmware from linux side
soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
soc: qcom: geni-se: Cleanup register defines and update copyright
dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
Documentation: tee: Add Qualcomm TEE driver
tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
tee: qcom: add primordial object
tee: add Qualcomm TEE driver
tee: increase TEE_MAX_ARG_SIZE to 4096
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
tee: add close_context to TEE driver operation
...
This round of updates contains a fair amount of new device support, a couple of fixes and
some refactoring. The most notable additions include new drivers for Loongson's Security
Engine, RNG and TPM, new drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a refactoring to use a more modern
GPIO API for the VEXPRESS sysreg driver, the removal of a deprecated IRQ ACK function from the
MC13xxx RTC driver and a new DT binding for the aforementioned TI BQ257xx charger.
New Support & Features
- Add a suite of drivers for the Loongson Security Engine, including the core controller, a
Random Number Generator (RNG) and Trusted Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including the input driver, MFD
cell registration, and a system power-off handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs, including the core MFD
driver and a power supply driver for the charger functionality.
Improvements & Fixes
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS sysreg driver to prevent
potential silent failures.
Cleanups & Refactoring
- Add a MAINTAINERS entry for the new Loongson Security Engine drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO chip API.
Removals
- Remove the deprecated and unused mc13xxx_irq_ack() function from the MC13xxx RTC, input and
touchscreen drivers.
Device Tree Bindings Updates
- Add device tree bindings for the TI BQ25703A charger.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmjdMogACgkQUa+KL4f8
d2FYEA/+J3U3bzH0JdjGVscQD1vLq+PjT0MsYoNLHSNG55H0Q9FhEv2SVmnRG8LR
DPvYXqpLHcHTGpPdCK7RX6FhSmXMFqXiWFbn9/lQE/+MX41U0B9E7rbRVCH8m+Vw
TAOvR86DEcTZFq3BEPDfjc4Q0ZPHKpyo/HOW739frmwC/a66K6G70vKmO+LJlqMk
asBAZUfRs14iaZte8LDKfcYcvC4NrJqtLD9lxPiuGxapMCGvJ+uReo+44A0F+wb8
UNq+cwdFK2rqPAur5ehe8C6s9IsANF4+OmAbbmqxfkbroiSYR7I2SeUhgxU/b8Om
9v+NqfC7Xsb8lcTJ/c0qCW8NfBtOlqer1lEHGTU91fTCAhACb4j7OuJtnTusp9Nk
W9Z9QcfOv/Mt7I/SUw9n8SQdHgPt9tQa6iqcGrYGp3enm8BISeb2jTTgrkDcCkKb
UTH8xVmxFgda08RCmPDPvrK0ebQ6gQzdq4g5vN3or1tFIKQHplorbvaAQtCBK02h
8ef33KrQ4HLV/NjijYrnFhrhj0WYBwmRb8vr43t4wvUdvlOSuK+VswKGIMhQabT3
uU+YjtCt19siOIx47XZVpj1gKTr24OoK2B+U8zy5oHj7abrRNkseZ8NMeu0vGzCn
p+ThEq+dxGD0mskaufdbJhejjumgCFaYNElWNHJQUGhMxHM5vQE=
=h21C
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
The Loongson-2K Board Management Controller provides an PCIe interface
to the host to access the feature implemented in the BMC.
The BMC is assembled on a server similar to the server machine with
Loongson-3 CPU. It supports multiple sub-devices like DRM and IPMI.
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/0dc1fd53020ce2562453961ffed2cd9eb8f359e1.1756987761.git.zhoubinbin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Enable support for the RTC and regulators found in the SpacemiT P1
PMIC. Support is implemented by the simple I2C MFD driver.
The P1 PMIC is normally implemented with the SpacemiT K1 SoC. This
PMIC provides 6 buck converters and 12 LDO regulators. It also
implements a switch, watchdog timer, real-time clock, and more.
Initially its RTC and regulators are supported.
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/r/20250825172057.163883-3-elder@riscstar.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver uses the legacy gpiolib interfaces to get gpio
numbers from platform data. There are no in-tree users of
this driver, so nothing defines the platform data.
Add a dependency on GPIOLIB_LEGACY for the moment to avoid the build
failure, and make sure the sound driver does not get built without the
mfd portion either pass that dependency along.
Alternatively, we could remove the mfd driver along with the backlight
and regulator portions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250808151822.536879-15-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
This driver uses the legacy gpiolib interfaces to get gpio
numbers from platform data:
drivers/mfd/si476x-i2c.c: In function 'si476x_core_start':
drivers/mfd/si476x-i2c.c:133:21: error: implicit declaration of function 'gpio_is_valid'; did you mean 'uuid_is_valid'? [-Werror=implicit-function-declaration]
133 | if (gpio_is_valid(core->gpio_reset))
There are no in-tree users of this driver, so nothing defines
the platform data.
Add a dependency on GPIOLIB_LEGACY for the moment to avoid the build
failure, and make sure the sound driver does not get built without the
mfd portion either pass that dependency along.
Alternatively, we could remove the mfd driver along with the radio and
sound portions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507231653.UFlH2dMO-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250808151822.536879-14-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fwWe
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-input-pinctrl-pwm-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Pull changes from the immutable branch between MFD, GPIO, Input, Pinctrl
and PWM trees containing the GPIO driver for max7360.
-----BEGIN PGP SIGNATURE-----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=DW3r
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-hwmon-i2c-can-rtc-watchdog-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Pull changes from the immutable branch between MFD, GPIO, HWMON, I2C,
CAN, RTC and Watchdog trees containing GPIO support for Nuvoton NCT6694.
Add core driver to support MAX7360 i2c chip, multi function device
with keypad, GPIO, PWM, GPO and rotary encoder submodules.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Co-developed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-2-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Nuvoton NCT6694 provides an USB interface to the host to
access its features.
Sub-devices can use the USB functions nct6694_read_msg() and
nct6694_write_msg() to issue a command. They can also request
interrupt that will be called when the USB device receives its
interrupt pipe.
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-2-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Texas Instruments BQ25703A is an integrated charger manager and
boost converter.
The MFD driver initializes the device for the regulator driver
and power supply driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250904160530.66178-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
LAN969x uses the Atmel USART, so make it selectable for ARCH_MICROCHIP to
avoid needing to update depends in future if other Microchip SoC-s use it
as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Daniel Machon <daniel.machon@microchip.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Export the core probe and remove function to be used by i2c and spi
drivers. Also add necessary module information so the drivers can be built
as modules. This reduces footprint of the driver is enabled but unused.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250819070458.1027883-1-alexander.stein@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Loongson Security Engine chip supports RNG, SM2, SM3 and SM4 accelerator
engines. This is the base driver for other specific engine drivers.
Co-developed-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250705072045.1067-2-zhaoqunqin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Move some Cirrus parts so they are grouped together alphabetically in
menuconfig. Also move the Maxim 5970 out of the middle of the Cirrus
parts and put it with the other Maxim parts. No functional changes
just alphabetising.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250709133103.3482015-1-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The System Management Controller (SMC) on Apple Silicon machines is a
piece of hardware that exposes various functionalities such as
temperature sensors, voltage/power meters, shutdown/reboot handling,
GPIOs and more.
Communication happens via a shared mailbox using the RTKit protocol
which is also used for other co-processors. The SMC protocol then allows
reading and writing many different keys which implement the various
features. The MFD core device handles this protocol and exposes it
to the sub-devices.
Some of the sub-devices are potentially also useful on pre-M1 Apple
machines and support for SMCs on these machines can be added at a later
time.
Co-developed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250610-smc-6-15-v7-5-556cafd771d3@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for Samsung's S2MPG10 PMIC, which is a Power Management IC
for mobile applications with buck converters, various LDOs, power
meters, RTC, clock outputs, and additional GPIOs interfaces.
Contrary to existing Samsung S2M series PMICs supported, communication
is not via I2C, but via the Samsung ACPM firmware.
This commit adds the core driver.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-9-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
As a preparation for adding support for Samsung's S2MPG10, which is
connected via SPEEDY / ACPM rather than I2C, split out (move) all
I2C-specific driver code into its own kernel module, sec-i2c, and
make the existing sec-core module be just the transport-agnostic core
driver kernel module.
At the same time, update all defconfigs that reference the old kconfig
symbol name.
While at it, also update file header comments and module description(s)
to drop references to 'mfd', and update comments to be C-style, not
C++.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-8-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The Maxim MAX77759 is a companion PMIC for USB Type-C applications and
includes Battery Charger, Fuel Gauge, temperature sensors, USB Type-C
Port Controller (TCPC), NVMEM, and a GPIO expander.
Fuel Gauge and TCPC have separate and independent I2C addresses,
register maps, and interrupt lines and are therefore excluded from the
MFD core device driver here.
The GPIO and NVMEM interfaces are accessed via specific commands to the
built-in microprocessor. This driver implements an API that client
drivers can use for accessing those.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250509-max77759-mfd-v10-1-962ac15ee3ef@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
With commit dcbb01fbb7 ("x86/pci: Remove old STA2x11 support"), the core
driver for STA2x11 is not needed and cannot be built anymore.
Remove the driver and its header file.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250303100055.372689-1-lukas.bulwahn@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
LAN969x uses the AT91 USART IP so make it selectable for ARCH_LAN969X.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20250131171739.1044701-2-robert.marko@sartura.hr
Signed-off-by: Lee Jones <lee@kernel.org>
The UP boards implement some features (pin controller, LEDs) through an
on-board FPGA.
This MFD driver implements the line protocol to communicate with the FPGA
through regmap, and registers pin controller and led cells.
This commit adds support for UP and UP Squared boards.
Based on the work done by Gary Wang <garywang@aaeon.com.tw>.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241211-aaeon-up-board-pinctrl-support-v1-1-24719be27631@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
These microcontroller units are used in network-attached-storage devices
made by QNAP and provide additional functionality to the system.
This adds the base driver that implements the serial protocol via
serdev and additionally hooks into the poweroff handlers to turn
off the parts of the system not supplied by the general PMIC.
Turning off (at least the TSx33 devices using Rockchip SoCs) consists of
two separate actions. Turning off the MCU alone does not turn off the main
SoC and turning off only the SoC/PMIC does not turn off the hard-drives.
Also if the MCU is not turned off, the system also won't start again until
it is unplugged from power.
So on shutdown the MCU needs to be turned off separately before the
main PMIC.
The protocol spoken by the MCU is sadly not documented, but was
obtained by listening to the chatter on the serial port, as thankfully
the "hal_app" program from QNAPs firmware allows triggering all/most
MCU actions from the command line.
The implementation of how to talk to the serial device got some
inspiration from the rave-sp servdev driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-5-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241022124745.5d8d3778@endymion.delvare
Signed-off-by: Lee Jones <lee@kernel.org>
Add core MFD driver for the Board Controller found on some Congatec SMARC
module. This Board Controller provides functions like watchdog, GPIO, and
I2C busses.
This commit adds support only for the conga-SA7 module.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-1-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the chip by modelling it as an MFD device, with two
child devices for the GPIO and PWM functions.
The driver is derived from an initial implementation from NXP, available
in commit 8059835bee19 ("MLK-25917-1 mfd: adp5585: add ADI adp5585 core
support") in their BSP kernel tree. It has been extensively rewritten.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240722121100.2855-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Lee Jones <lee@kernel.org>
Marvell 88PM886 is a PMIC which provides various functions such as
onkey, battery, charger and regulators. It is found for instance in the
samsung,coreprimevelte smartphone with which this was tested. Implement
basic support to allow for the use of regulators and onkey.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Link: https://lore.kernel.org/r/20240531175109.15599-3-balejk@matfyz.cz
Signed-off-by: Lee Jones <lee@kernel.org>
Introduce support for Cirrus Logic Device CS40L50: a
haptic driver with waveform memory, integrated DSP,
and closed-loop algorithms.
The MFD component registers and initializes the device.
Signed-off-by: James Ogletree <jogletre@opensource.cirrus.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20240620161745.2312359-4-jogletre@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Rework the pm8008 driver to match the new devicetree binding which no
longer describes internal details like interrupts and register offsets
(including which of the two consecutive I2C addresses the registers
belong to).
Instead make the interrupt controller implementation internal and pass
interrupts to the subdrivers using MFD cell resources.
Note that subdrivers may either get their resources, like register block
offsets, from the parent MFD or this can be included in the subdrivers
directly.
In the current implementation, the temperature alarm driver is generic
enough to just get its base address and alarm interrupt from the parent
driver, which already uses this information to implement the interrupt
controller.
The regulator driver, however, needs additional information like parent
supplies and regulator characteristics so in that case it is easier to
just augment its table with the regulator register base addresses.
Similarly, the current GPIO driver already holds the number of pins and
that lookup table can therefore also be extended with register offsets.
Note that subdrivers can now access the two regmaps by name, even if the
primary regmap is registered last so that it is returned by default when
no name is provided in lookups.
Finally, note that the temperature alarm and GPIO subdrivers need some
minor rework before they can be used with non-SPMI devices like the
PM8008. The temperature alarm MFD cell name specifically uses a "qpnp"
rather than "spmi" prefix to prevent binding until the driver has been
updated.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240608155526.12996-11-johan+linaro@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
