mirror of
https://github.com/torvalds/linux.git
synced 2026-03-08 01:24:47 +01:00
f6194de7df
Add the Device Tree binding for the PCIe/USB 3.0 combo PHY found in the SpacemiT K1 SoC. This is one of three PCIe PHYs, and is unusual in that only the combo PHY can perform a calibration step needed to determine settings used by the other two PCIe PHYs. Calibration must be done with the combo PHY in PCIe mode, and to allow this to occur independent of the eventual use for the PHY (PCIe or USB) some PCIe-related properties must be supplied: clocks; resets; and a syscon phandle. Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Alex Elder <elder@riscstar.com> Link: https://lore.kernel.org/all/ba532f8d-a452-40e5-af46-b58b89f70a92@linaro.org/ [1] Tested-by: Yixun Lan <dlan@gentoo.org> Link: https://patch.msgid.link/20251218151235.454997-2-elder@riscstar.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
114 lines
3.4 KiB
YAML
114 lines
3.4 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/phy/spacemit,k1-combo-phy.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: SpacemiT K1 PCIe/USB3 Combo PHY
|
|
|
|
maintainers:
|
|
- Alex Elder <elder@riscstar.com>
|
|
|
|
description: >
|
|
Of the three PHYs on the SpacemiT K1 SoC capable of being used for
|
|
PCIe, one is a combo PHY that can also be configured for use by a
|
|
USB 3 controller. Using PCIe or USB 3 is a board design decision.
|
|
|
|
The combo PHY is also the only PCIe PHY that is able to determine
|
|
PCIe calibration values to use, and this must be determined before
|
|
the other two PCIe PHYs can be used. This calibration must be
|
|
performed with the combo PHY in PCIe mode, and is this is done
|
|
when the combo PHY is probed.
|
|
|
|
The combo PHY uses an external oscillator as a reference clock.
|
|
During normal operation, the PCIe or USB port driver is responsible
|
|
for ensuring all other clocks needed by a PHY are enabled, and all
|
|
resets affecting the PHY are deasserted. However, for the combo
|
|
PHY to perform calibration independent of whether it's later used
|
|
for PCIe or USB, all PCIe mode clocks and resets must be defined.
|
|
|
|
properties:
|
|
compatible:
|
|
const: spacemit,k1-combo-phy
|
|
|
|
reg:
|
|
items:
|
|
- description: PHY control registers
|
|
|
|
clocks:
|
|
items:
|
|
- description: External oscillator used by the PHY PLL
|
|
- description: DWC PCIe Data Bus Interface (DBI) clock
|
|
- description: DWC PCIe application AXI-bus Master interface clock
|
|
- description: DWC PCIe application AXI-bus slave interface clock
|
|
|
|
clock-names:
|
|
items:
|
|
- const: refclk
|
|
- const: dbi
|
|
- const: mstr
|
|
- const: slv
|
|
|
|
resets:
|
|
items:
|
|
- description: PHY reset; remains deasserted after initialization
|
|
- description: DWC PCIe Data Bus Interface (DBI) reset
|
|
- description: DWC PCIe application AXI-bus Master interface reset
|
|
- description: DWC PCIe application AXI-bus slave interface reset
|
|
|
|
reset-names:
|
|
items:
|
|
- const: phy
|
|
- const: dbi
|
|
- const: mstr
|
|
- const: slv
|
|
|
|
spacemit,apmu:
|
|
description:
|
|
A phandle that refers to the APMU system controller, whose
|
|
regmap is used in setting the mode
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
|
|
"#phy-cells":
|
|
const: 1
|
|
description:
|
|
The argument value (PHY_TYPE_PCIE or PHY_TYPE_USB3) determines
|
|
whether the PHY operates in PCIe or USB3 mode.
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-names
|
|
- resets
|
|
- reset-names
|
|
- spacemit,apmu
|
|
- "#phy-cells"
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/clock/spacemit,k1-syscon.h>
|
|
phy@c0b10000 {
|
|
compatible = "spacemit,k1-combo-phy";
|
|
reg = <0xc0b10000 0x1000>;
|
|
clocks = <&vctcxo_24m>,
|
|
<&syscon_apmu CLK_PCIE0_DBI>,
|
|
<&syscon_apmu CLK_PCIE0_MASTER>,
|
|
<&syscon_apmu CLK_PCIE0_SLAVE>;
|
|
clock-names = "refclk",
|
|
"dbi",
|
|
"mstr",
|
|
"slv";
|
|
resets = <&syscon_apmu RESET_PCIE0_GLOBAL>,
|
|
<&syscon_apmu RESET_PCIE0_DBI>,
|
|
<&syscon_apmu RESET_PCIE0_MASTER>,
|
|
<&syscon_apmu RESET_PCIE0_SLAVE>;
|
|
reset-names = "phy",
|
|
"dbi",
|
|
"mstr",
|
|
"slv";
|
|
spacemit,apmu = <&syscon_apmu>;
|
|
#phy-cells = <1>;
|
|
};
|