linux/arch/openrisc/mm/init.c
Mike Rapoport (Microsoft) d49004c5f0 arch, mm: consolidate initialization of nodes, zones and memory map
To initialize node, zone and memory map data structures every architecture
calls free_area_init() during setup_arch() and passes it an array of zone
limits.

Beside code duplication it creates "interesting" ordering cases between
allocation and initialization of hugetlb and the memory map.  Some
architectures allocate hugetlb pages very early in setup_arch() in certain
cases, some only create hugetlb CMA areas in setup_arch() and sometimes
hugetlb allocations happen mm_core_init().

With arch_zone_limits_init() helper available now on all architectures it
is no longer necessary to call free_area_init() from architecture setup
code.  Rather core MM initialization can call arch_zone_limits_init() in a
single place.

This allows to unify ordering of hugetlb vs memory map allocation and
initialization.

Remove the call to free_area_init() from architecture specific code and
place it in a new mm_core_init_early() function that is called immediately
after setup_arch().

After this refactoring it is possible to consolidate hugetlb allocations
and eliminate differences in ordering of hugetlb and memory map
initialization among different architectures.

As the first step of this consolidation move hugetlb_bootmem_alloc() to
mm_core_early_init().

Link: https://lkml.kernel.org/r/20260111082105.290734-24-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2026-01-26 20:02:18 -08:00

258 lines
6.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* OpenRISC idle.c
*
* Linux architectural port borrowing liberally from similar works of
* others. All original copyrights apply as per the original source
* declaration.
*
* Modifications for the OpenRISC architecture:
* Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
* Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
*/
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/smp.h>
#include <linux/memblock.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pagemap.h>
#include <asm/pgalloc.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/tlb.h>
#include <asm/mmu_context.h>
#include <asm/fixmap.h>
#include <asm/tlbflush.h>
#include <asm/sections.h>
#include <asm/cacheflush.h>
int mem_init_done;
void __init arch_zone_limits_init(unsigned long *max_zone_pfns)
{
/*
* We use only ZONE_NORMAL
*/
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
}
extern const char _s_kernel_ro[], _e_kernel_ro[];
/*
* Map all physical memory into kernel's address space.
*
* This is explicitly coded for two-level page tables, so if you need
* something else then this needs to change.
*/
static void __init map_ram(void)
{
phys_addr_t start, end;
unsigned long v, p, e;
pgprot_t prot;
pgd_t *pge;
p4d_t *p4e;
pud_t *pue;
pmd_t *pme;
pte_t *pte;
u64 i;
/* These mark extents of read-only kernel pages...
* ...from vmlinux.lds.S
*/
v = PAGE_OFFSET;
for_each_mem_range(i, &start, &end) {
p = (u32) start & PAGE_MASK;
e = (u32) end;
v = (u32) __va(p);
pge = pgd_offset_k(v);
while (p < e) {
int j;
p4e = p4d_offset(pge, v);
pue = pud_offset(p4e, v);
pme = pmd_offset(pue, v);
if ((u32) pue != (u32) pge || (u32) pme != (u32) pge) {
panic("%s: OR1K kernel hardcoded for "
"two-level page tables",
__func__);
}
/* Alloc one page for holding PTE's... */
pte = memblock_alloc_raw(PAGE_SIZE, PAGE_SIZE);
if (!pte)
panic("%s: Failed to allocate page for PTEs\n",
__func__);
set_pmd(pme, __pmd(_KERNPG_TABLE + __pa(pte)));
/* Fill the newly allocated page with PTE'S */
for (j = 0; p < e && j < PTRS_PER_PTE;
v += PAGE_SIZE, p += PAGE_SIZE, j++, pte++) {
if (v >= (u32) _e_kernel_ro ||
v < (u32) _s_kernel_ro)
prot = PAGE_KERNEL;
else
prot = PAGE_KERNEL_RO;
set_pte(pte, mk_pte_phys(p, prot));
}
pge++;
}
printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
start, end);
}
}
void __init paging_init(void)
{
int i;
printk(KERN_INFO "Setting up paging and PTEs.\n");
/* clear out the init_mm.pgd that will contain the kernel's mappings */
for (i = 0; i < PTRS_PER_PGD; i++)
swapper_pg_dir[i] = __pgd(0);
/* make sure the current pgd table points to something sane
* (even if it is most probably not used until the next
* switch_mm)
*/
current_pgd[smp_processor_id()] = init_mm.pgd;
map_ram();
/* self modifying code ;) */
/* Since the old TLB miss handler has been running up until now,
* the kernel pages are still all RW, so we can still modify the
* text directly... after this change and a TLB flush, the kernel
* pages will become RO.
*/
{
extern unsigned long dtlb_miss_handler;
extern unsigned long itlb_miss_handler;
unsigned long *dtlb_vector = __va(0x900);
unsigned long *itlb_vector = __va(0xa00);
printk(KERN_INFO "itlb_miss_handler %p\n", &itlb_miss_handler);
*itlb_vector = ((unsigned long)&itlb_miss_handler -
(unsigned long)itlb_vector) >> 2;
/* Soft ordering constraint to ensure that dtlb_vector is
* the last thing updated
*/
barrier();
printk(KERN_INFO "dtlb_miss_handler %p\n", &dtlb_miss_handler);
*dtlb_vector = ((unsigned long)&dtlb_miss_handler -
(unsigned long)dtlb_vector) >> 2;
}
/* Soft ordering constraint to ensure that cache invalidation and
* TLB flush really happen _after_ code has been modified.
*/
barrier();
/* Invalidate instruction caches after code modification */
local_icache_block_inv(0x900);
local_icache_block_inv(0xa00);
/* New TLB miss handlers and kernel page tables are in now place.
* Make sure that page flags get updated for all pages in TLB by
* flushing the TLB and forcing all TLB entries to be recreated
* from their page table flags.
*/
flush_tlb_all();
}
/* References to section boundaries */
void __init mem_init(void)
{
BUG_ON(!mem_map);
/* clear the zero-page */
memset((void *)empty_zero_page, 0, PAGE_SIZE);
printk("mem_init_done ...........................................\n");
mem_init_done = 1;
return;
}
static int __init map_page(unsigned long va, phys_addr_t pa, pgprot_t prot)
{
p4d_t *p4d;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
p4d = p4d_offset(pgd_offset_k(va), va);
pud = pud_offset(p4d, va);
pmd = pmd_offset(pud, va);
pte = pte_alloc_kernel(pmd, va);
if (pte == NULL)
return -ENOMEM;
if (pgprot_val(prot))
set_pte_at(&init_mm, va, pte, pfn_pte(pa >> PAGE_SHIFT, prot));
else
pte_clear(&init_mm, va, pte);
local_flush_tlb_page(NULL, va);
return 0;
}
/*
* __set_fix must now support both EARLYCON and TEXT_POKE mappings,
* which are used at different stages of kernel execution.
*/
void __set_fixmap(enum fixed_addresses idx,
phys_addr_t phys, pgprot_t prot)
{
unsigned long address = __fix_to_virt(idx);
if (idx >= __end_of_fixed_addresses) {
BUG();
return;
}
map_page(address, phys, prot);
}
static const pgprot_t protection_map[16] = {
[VM_NONE] = PAGE_NONE,
[VM_READ] = PAGE_READONLY_X,
[VM_WRITE] = PAGE_COPY,
[VM_WRITE | VM_READ] = PAGE_COPY_X,
[VM_EXEC] = PAGE_READONLY,
[VM_EXEC | VM_READ] = PAGE_READONLY_X,
[VM_EXEC | VM_WRITE] = PAGE_COPY,
[VM_EXEC | VM_WRITE | VM_READ] = PAGE_COPY_X,
[VM_SHARED] = PAGE_NONE,
[VM_SHARED | VM_READ] = PAGE_READONLY_X,
[VM_SHARED | VM_WRITE] = PAGE_SHARED,
[VM_SHARED | VM_WRITE | VM_READ] = PAGE_SHARED_X,
[VM_SHARED | VM_EXEC] = PAGE_READONLY,
[VM_SHARED | VM_EXEC | VM_READ] = PAGE_READONLY_X,
[VM_SHARED | VM_EXEC | VM_WRITE] = PAGE_SHARED,
[VM_SHARED | VM_EXEC | VM_WRITE | VM_READ] = PAGE_SHARED_X
};
DECLARE_VM_GET_PAGE_PROT