mirror of
https://github.com/torvalds/linux.git
synced 2026-03-08 04:04:43 +01:00
43b1d60361
Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce support for the Milos SoC (SM7635) and initial support for the Fairphone (Gen 6) device on this platform. Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ, the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and the SDM845-based Pixel 3 and Pixel 3 XL devices. On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller is described. On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added. IO-regions and clocks are added to interconnect nodes to allow QoS configuration. GPU, TPM and USB support are enabled on the evaluation kit (EVK). On Monaco (QCS8300) the two PCIe controllers, the camera subsystem, tsens, display subsystem, crypto, CPUfreq, and coresight are added. On the evaluation kit (EVK) the PCIe busses are enabled, together with an AMC6821-based fan controller and the ST33 TPM chip. On MSM8939 the camera subsystem is described. The Asus ZenFone 2 Laser/Selfie gains battery and hall sensor support. On the Agatti-based RB1 board PM8008 is described and an overlay for the Vision mezzanine is introduced. On SDM630 the compute DSP remoteproc, FastRPC and related entites are described. The LPASS LPI pinctrl node is described. On SDM845-based OnePlus device the bootloader framebuffer and its resources are described, to improve the transition. On the SDM845-based devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1. On SM7225-based Fairphone FP4 regulators for the cameras are described, and the camera EEPROM is added. On SM8650 the camera subsystem is described. On the QRD the Samsung S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear Camera Card" is added. On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are added, and missing - required - properties for the BAM DMA is added. These are then enabled on the MTP. On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added. DisplayPort is enabled on the Talos Ride board. On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and random number generator block. The soc bus address width is corrected to match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback over DisplayPort is introduced. HDMI, Iris (video encode/decode) and PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG (red/green) LEDs are described. Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD 14 S1 (commit should have been on drivers branch). -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmluY0UACgkQCx85Pw2Z rcULshAA2wZmfS4CeeZjIGUMbZg+ntby1xUJ4cKTeUR9IDd86L57qAkhHCNaP/ST 8ta22+4W9uId2zDTyxxmXbf5rTLIkc+t0dLjkl48HHmu6Kmxc2qALwcW7m2Cw/AI 3MAXUxVMmTM8BKvxSqW4lzNtQehxMXuErxXzVyUdzHMyiard25HUmXuMTsbIcteK yXr+SsAfisSjLTYAYhXkRihPK6OqYO9LkO1pah1Uf1pFY4FtJCbCEQR3a4uSTaQf u/NMQAc83LcboM2al1eHVU9fCeoA/oH/i6VZfpEAQLFf7cvsDP6f8CZF8RDWs1NE CdISQQdZxmgIfCawq5yt2765NR91Q8E64e49GSi56FWTEX+WBdohLR1qRLl7OrNM /rlvB29GhFTpxCjV5JwoAGacS3dn2MScNSXQSQNMRZBpDgGMM2PtnyOc+IhjMb+2 vOZrU+RS7eph6d9++yrIAMZfnEo8NtwVo0Eu3n0LmPmn4PK/2Kc+OS0Vc8r7IwBI qrAj4kkFGsMkfTEH2m4OO3lFH/Dw04E/YX1bSx3uFBkf8oQZrzmQJmn6kUT2MY0a 9rIJgnoo1R8d6MRAFkEKQqaRisWqEhnN3EZvn1bQj+0HlC5o3AHgjZQhwuZ/y/3B DvD7sSV1qSkbF/Dxcy4VRXZI+T6PgybrbL/yF+CD6cZiR4Grw8w= =qT6q -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAml3gp8ACgkQmmx57+YA GNmhbA//bKzmRMoV1kx7czXgCfAbSq0SAUNbHs294Zkog/8ILBWnSYiS1smMlKfe W7c9x/7QT1myy2TiEZ2wDGzGWC/7benTu5HHGSL+UTSc3vVfKb3wpN021kuhxfhW fNpATd6oiOtuGfURgaZlXHaJlDS8TDXr+jJ8lgDKUuMmyJPpBf265/eyS8pSCoVR l6ImLT3Im2G4qXhYV7LzApTqe3wu6H6AW2EGPrAHWz4WrebTOzAr2yEY0CPOsPqA EnF2slYnPsRYz7RwkBwXM8gSX7711iGwOp/xQWIqmZxHaQa915w816bnPLzWxJTg j384ly4sJw/C047iLQdZBaqgGGU9Pu8/3iK1K0mlnfc3NmF1KeaSu3KKB4XxLkF/ +zw1gFjU6xCbfphHk44f8+hQdsIDa6wpL2jV4VdAE989wtOH2pIPS1WRboZCcvLz LummFnQigACAfwKygnmHGIEtVA1rw0U5wfRdvVq2slv2Kfrye5x92QgY/euuR2wW 7XWIubZESPHqvBPSa2bG7XNcd5gG+EaSZg0apJ6s9JbMm1PHjtKbnEqmv2E5GYUE bO3/XPrAalQ+bpN7TvCPkoFgD3Qr6SPK1Du/zQgIf0i5L/CGKKdaE/EVcmXSOOPR 4MH7kQQx7zcQ6i2OUOfDuGZemGGLOXXRZmGsJpY686gsLg6FYN8= =3Isi -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree for v6.20 Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce support for the Milos SoC (SM7635) and initial support for the Fairphone (Gen 6) device on this platform. Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ, the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and the SDM845-based Pixel 3 and Pixel 3 XL devices. On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller is described. On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added. IO-regions and clocks are added to interconnect nodes to allow QoS configuration. GPU, TPM and USB support are enabled on the evaluation kit (EVK). On Monaco (QCS8300) the two PCIe controllers, the camera subsystem, tsens, display subsystem, crypto, CPUfreq, and coresight are added. On the evaluation kit (EVK) the PCIe busses are enabled, together with an AMC6821-based fan controller and the ST33 TPM chip. On MSM8939 the camera subsystem is described. The Asus ZenFone 2 Laser/Selfie gains battery and hall sensor support. On the Agatti-based RB1 board PM8008 is described and an overlay for the Vision mezzanine is introduced. On SDM630 the compute DSP remoteproc, FastRPC and related entites are described. The LPASS LPI pinctrl node is described. On SDM845-based OnePlus device the bootloader framebuffer and its resources are described, to improve the transition. On the SDM845-based devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1. On SM7225-based Fairphone FP4 regulators for the cameras are described, and the camera EEPROM is added. On SM8650 the camera subsystem is described. On the QRD the Samsung S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear Camera Card" is added. On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are added, and missing - required - properties for the BAM DMA is added. These are then enabled on the MTP. On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added. DisplayPort is enabled on the Talos Ride board. On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and random number generator block. The soc bus address width is corrected to match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback over DisplayPort is introduced. HDMI, Iris (video encode/decode) and PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG (red/green) LEDs are described. Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD 14 S1 (commit should have been on drivers branch). * tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (155 commits) dt-bindings: mailbox: qcom: Add IPCC support for Kaanapali and Glymur Platforms dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings for Kaanapali arm64: dts: qcom: lemans: enable static TPDM arm64: dts: qcom: kodiak: Add memory region for audiopd arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes arm64: dts: qcom: x1e: bus is 40-bits (fix 64GB models) arm64: dts: qcom: lemans; Add EL2 overlay arm64: dts: qcom: sm8150: add uart13 arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1 arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0 arm64: dts: qcom: qrb4210-rb2: Fix UART3 wakeup IRQ storm arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype arm64: dts: qcom: qcs8300: Add GPU cooling arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11 arm64: dts: qcom: talos: Add PMU support arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions arm64: dts: qcom: ipq9574: Complete USB DWC3 wrapper interrupts arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts arm64: dts: qcom: monaco: Add CTCU and ETR nodes ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|---|---|---|
| .. | ||
| arm_ffa | ||
| arm_scmi | ||
| broadcom | ||
| cirrus | ||
| efi | ||
| imx | ||
| meson | ||
| microchip | ||
| psci | ||
| qcom | ||
| samsung | ||
| smccc | ||
| tegra | ||
| xilinx | ||
| arm_scpi.c | ||
| arm_sdei.c | ||
| dmi-id.c | ||
| dmi-sysfs.c | ||
| dmi_scan.c | ||
| edd.c | ||
| iscsi_ibft.c | ||
| iscsi_ibft_find.c | ||
| Kconfig | ||
| Makefile | ||
| memmap.c | ||
| mtk-adsp-ipc.c | ||
| qemu_fw_cfg.c | ||
| raspberrypi.c | ||
| stratix10-rsu.c | ||
| stratix10-svc.c | ||
| sysfb.c | ||
| sysfb_simplefb.c | ||
| thead,th1520-aon.c | ||
| ti_sci.c | ||
| ti_sci.h | ||
| trusted_foundations.c | ||
| turris-mox-rwtm.c | ||