linux/drivers/macintosh/windfarm_lm87_sensor.c
Linus Torvalds bf4afc53b7 Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 17:09:51 -08:00

201 lines
4 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Windfarm PowerMac thermal control. LM87 sensor
*
* Copyright 2012 Benjamin Herrenschmidt, IBM Corp.
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/i2c.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/sections.h>
#include <asm/pmac_low_i2c.h>
#include "windfarm.h"
#define VERSION "1.0"
#undef DEBUG
#ifdef DEBUG
#define DBG(args...) printk(args)
#else
#define DBG(args...) do { } while(0)
#endif
struct wf_lm87_sensor {
struct i2c_client *i2c;
struct wf_sensor sens;
};
#define wf_to_lm87(c) container_of(c, struct wf_lm87_sensor, sens)
static int wf_lm87_read_reg(struct i2c_client *chip, int reg)
{
int rc, tries = 0;
u8 buf;
for (;;) {
/* Set address */
buf = (u8)reg;
rc = i2c_master_send(chip, &buf, 1);
if (rc <= 0)
goto error;
rc = i2c_master_recv(chip, &buf, 1);
if (rc <= 0)
goto error;
return (int)buf;
error:
DBG("wf_lm87: Error reading LM87, retrying...\n");
if (++tries > 10) {
printk(KERN_ERR "wf_lm87: Error reading LM87 !\n");
return -EIO;
}
msleep(10);
}
}
static int wf_lm87_get(struct wf_sensor *sr, s32 *value)
{
struct wf_lm87_sensor *lm = sr->priv;
s32 temp;
if (lm->i2c == NULL)
return -ENODEV;
#define LM87_INT_TEMP 0x27
/* Read temperature register */
temp = wf_lm87_read_reg(lm->i2c, LM87_INT_TEMP);
if (temp < 0)
return temp;
*value = temp << 16;
return 0;
}
static void wf_lm87_release(struct wf_sensor *sr)
{
struct wf_lm87_sensor *lm = wf_to_lm87(sr);
kfree(lm);
}
static const struct wf_sensor_ops wf_lm87_ops = {
.get_value = wf_lm87_get,
.release = wf_lm87_release,
.owner = THIS_MODULE,
};
static int wf_lm87_probe(struct i2c_client *client)
{
struct wf_lm87_sensor *lm;
const char *name = NULL, *loc;
struct device_node *np = NULL;
int rc;
/*
* The lm87 contains a whole pile of sensors, additionally,
* the Xserve G5 has several lm87's. However, for now we only
* care about the internal temperature sensor
*/
for_each_child_of_node(client->dev.of_node, np) {
if (!of_node_name_eq(np, "int-temp"))
continue;
loc = of_get_property(np, "location", NULL);
if (!loc)
continue;
if (strstr(loc, "DIMM"))
name = "dimms-temp";
else if (strstr(loc, "Processors"))
name = "between-cpus-temp";
if (name) {
of_node_put(np);
break;
}
}
if (!name) {
pr_warn("wf_lm87: Unsupported sensor %pOF\n",
client->dev.of_node);
return -ENODEV;
}
lm = kzalloc_obj(struct wf_lm87_sensor);
if (lm == NULL)
return -ENODEV;
lm->i2c = client;
lm->sens.name = name;
lm->sens.ops = &wf_lm87_ops;
lm->sens.priv = lm;
i2c_set_clientdata(client, lm);
rc = wf_register_sensor(&lm->sens);
if (rc)
kfree(lm);
return rc;
}
static void wf_lm87_remove(struct i2c_client *client)
{
struct wf_lm87_sensor *lm = i2c_get_clientdata(client);
/* Mark client detached */
lm->i2c = NULL;
/* release sensor */
wf_unregister_sensor(&lm->sens);
}
static const struct i2c_device_id wf_lm87_id[] = {
{ "MAC,lm87cimt" },
{ }
};
MODULE_DEVICE_TABLE(i2c, wf_lm87_id);
static const struct of_device_id wf_lm87_of_id[] = {
{ .compatible = "lm87cimt", },
{ }
};
MODULE_DEVICE_TABLE(of, wf_lm87_of_id);
static struct i2c_driver wf_lm87_driver = {
.driver = {
.name = "wf_lm87",
.of_match_table = wf_lm87_of_id,
},
.probe = wf_lm87_probe,
.remove = wf_lm87_remove,
.id_table = wf_lm87_id,
};
static int __init wf_lm87_sensor_init(void)
{
/* We only support this on the Xserve */
if (!of_machine_is_compatible("RackMac3,1"))
return -ENODEV;
return i2c_add_driver(&wf_lm87_driver);
}
static void __exit wf_lm87_sensor_exit(void)
{
i2c_del_driver(&wf_lm87_driver);
}
module_init(wf_lm87_sensor_init);
module_exit(wf_lm87_sensor_exit);
MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
MODULE_DESCRIPTION("LM87 sensor objects for PowerMacs thermal control");
MODULE_LICENSE("GPL");