linux/drivers/bluetooth/hci_ath.c
Linus Torvalds bf4afc53b7 Convert 'alloc_obj' family to use the new default GFP_KERNEL argument
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-02-21 17:09:51 -08:00

268 lines
5.2 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Atheros Communication Bluetooth HCIATH3K UART protocol
*
* HCIATH3K (HCI Atheros AR300x Protocol) is a Atheros Communication's
* power management protocol extension to H4 to support AR300x Bluetooth Chip.
*
* Copyright (c) 2009-2010 Atheros Communications Inc.
*
* Acknowledgements:
* This file is based on hci_h4.c, which was written
* by Maxim Krasnyansky and Marcel Holtmann.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/errno.h>
#include <linux/ioctl.h>
#include <linux/skbuff.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "hci_uart.h"
struct ath_struct {
struct hci_uart *hu;
unsigned int cur_sleep;
struct sk_buff *rx_skb;
struct sk_buff_head txq;
struct work_struct ctxtsw;
};
#define OP_WRITE_TAG 0x01
#define INDEX_BDADDR 0x01
struct ath_vendor_cmd {
__u8 opcode;
__le16 index;
__u8 len;
__u8 data[251];
} __packed;
static int ath_wakeup_ar3k(struct tty_struct *tty)
{
int status = tty->driver->ops->tiocmget(tty);
if (status & TIOCM_CTS)
return status;
/* Clear RTS first */
tty->driver->ops->tiocmget(tty);
tty->driver->ops->tiocmset(tty, 0x00, TIOCM_RTS);
msleep(20);
/* Set RTS, wake up board */
tty->driver->ops->tiocmget(tty);
tty->driver->ops->tiocmset(tty, TIOCM_RTS, 0x00);
msleep(20);
status = tty->driver->ops->tiocmget(tty);
return status;
}
static void ath_hci_uart_work(struct work_struct *work)
{
int status;
struct ath_struct *ath;
struct hci_uart *hu;
struct tty_struct *tty;
ath = container_of(work, struct ath_struct, ctxtsw);
hu = ath->hu;
tty = hu->tty;
/* verify and wake up controller */
if (ath->cur_sleep) {
status = ath_wakeup_ar3k(tty);
if (!(status & TIOCM_CTS))
return;
}
/* Ready to send Data */
clear_bit(HCI_UART_SENDING, &hu->tx_state);
hci_uart_tx_wakeup(hu);
}
static int ath_open(struct hci_uart *hu)
{
struct ath_struct *ath;
BT_DBG("hu %p", hu);
if (!hci_uart_has_flow_control(hu))
return -EOPNOTSUPP;
ath = kzalloc_obj(*ath);
if (!ath)
return -ENOMEM;
skb_queue_head_init(&ath->txq);
hu->priv = ath;
ath->hu = hu;
INIT_WORK(&ath->ctxtsw, ath_hci_uart_work);
return 0;
}
static int ath_close(struct hci_uart *hu)
{
struct ath_struct *ath = hu->priv;
BT_DBG("hu %p", hu);
skb_queue_purge(&ath->txq);
kfree_skb(ath->rx_skb);
cancel_work_sync(&ath->ctxtsw);
hu->priv = NULL;
kfree(ath);
return 0;
}
static int ath_flush(struct hci_uart *hu)
{
struct ath_struct *ath = hu->priv;
BT_DBG("hu %p", hu);
skb_queue_purge(&ath->txq);
return 0;
}
static int ath_vendor_cmd(struct hci_dev *hdev, uint8_t opcode, uint16_t index,
const void *data, size_t dlen)
{
struct sk_buff *skb;
struct ath_vendor_cmd cmd;
if (dlen > sizeof(cmd.data))
return -EINVAL;
cmd.opcode = opcode;
cmd.index = cpu_to_le16(index);
cmd.len = dlen;
memcpy(cmd.data, data, dlen);
skb = __hci_cmd_sync(hdev, 0xfc0b, dlen + 4, &cmd, HCI_INIT_TIMEOUT);
if (IS_ERR(skb))
return PTR_ERR(skb);
kfree_skb(skb);
return 0;
}
static int ath_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
return ath_vendor_cmd(hdev, OP_WRITE_TAG, INDEX_BDADDR, bdaddr,
sizeof(*bdaddr));
}
static int ath_setup(struct hci_uart *hu)
{
BT_DBG("hu %p", hu);
hu->hdev->set_bdaddr = ath_set_bdaddr;
return 0;
}
static const struct h4_recv_pkt ath_recv_pkts[] = {
{ H4_RECV_ACL, .recv = hci_recv_frame },
{ H4_RECV_SCO, .recv = hci_recv_frame },
{ H4_RECV_EVENT, .recv = hci_recv_frame },
};
static int ath_recv(struct hci_uart *hu, const void *data, int count)
{
struct ath_struct *ath = hu->priv;
ath->rx_skb = h4_recv_buf(hu, ath->rx_skb, data, count,
ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts));
if (IS_ERR(ath->rx_skb)) {
int err = PTR_ERR(ath->rx_skb);
bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
ath->rx_skb = NULL;
return err;
}
return count;
}
#define HCI_OP_ATH_SLEEP 0xFC04
static int ath_enqueue(struct hci_uart *hu, struct sk_buff *skb)
{
struct ath_struct *ath = hu->priv;
if (hci_skb_pkt_type(skb) == HCI_SCODATA_PKT) {
kfree_skb(skb);
return 0;
}
/* Update power management enable flag with parameters of
* HCI sleep enable vendor specific HCI command.
*/
if (hci_skb_pkt_type(skb) == HCI_COMMAND_PKT) {
struct hci_command_hdr *hdr = (void *)skb->data;
if (__le16_to_cpu(hdr->opcode) == HCI_OP_ATH_SLEEP)
ath->cur_sleep = skb->data[HCI_COMMAND_HDR_SIZE];
}
BT_DBG("hu %p skb %p", hu, skb);
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1);
skb_queue_tail(&ath->txq, skb);
set_bit(HCI_UART_SENDING, &hu->tx_state);
schedule_work(&ath->ctxtsw);
return 0;
}
static struct sk_buff *ath_dequeue(struct hci_uart *hu)
{
struct ath_struct *ath = hu->priv;
return skb_dequeue(&ath->txq);
}
static const struct hci_uart_proto athp = {
.id = HCI_UART_ATH3K,
.name = "ATH3K",
.manufacturer = 69,
.open = ath_open,
.close = ath_close,
.flush = ath_flush,
.setup = ath_setup,
.recv = ath_recv,
.enqueue = ath_enqueue,
.dequeue = ath_dequeue,
};
int __init ath_init(void)
{
return hci_uart_register_proto(&athp);
}
int __exit ath_deinit(void)
{
return hci_uart_unregister_proto(&athp);
}