Today whenever we deal with a file, in addition to holding
a reference on the dentry, we also get a reference on the
superblock. This happens in two cases:
1. when a new cinode is allocated
2. when an oplock break is being processed
The reasoning for holding the superblock ref was to make sure
that when umount happens, if there are users of inodes and
dentries, it does not try to clean them up and wait for the
last ref to superblock to be dropped by last of such users.
But the side effect of doing that is that umount silently drops
a ref on the superblock and we could have deferred closes and
lease breaks still holding these refs.
Ideally, we should ensure that all of these users of inodes and
dentries are cleaned up at the time of umount, which is what this
code is doing.
This code change allows these code paths to use a ref on the
dentry (and hence the inode). That way, umount is
ensured to clean up SMB client resources when it's the last
ref on the superblock (For ex: when same objects are shared).
The code change also moves the call to close all the files in
deferred close list to the umount code path. It also waits for
oplock_break workers to be flushed before calling
kill_anon_super (which eventually frees up those objects).
Fixes: 24261fc23d ("cifs: delay super block destruction until all cifsFileInfo objects are gone")
Fixes: 705c79101c ("smb: client: fix use-after-free in cifs_oplock_break")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use atomic_t for cifs_sb_info::mnt_cifs_flags as it's currently
accessed locklessly and may be changed concurrently in mount/remount
and reconnect paths.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Although the array is sorted at build time, verify the ordering again
when cifs.ko is loaded to avoid potential regressions introduced by
future script changes.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/linux-cifs/20260106071507.1420900-4-chenxiaosong.chenxiaosong@linux.dev/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Split SMB1 protocol defs into smb1pdu.h. This should perhaps go in the
common/ directory.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Acked-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Setting ->setlease() to a NULL pointer now has the same effect as
setting it to simple_nosetlease(). Remove all of the setlease
file_operations that are set to simple_nosetlease, and the function
itself.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260108-setlease-6-20-v1-24-ea4dec9b67fa@kernel.org
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The check for S_ISREG() in cifs_setlease() is incorrect since that
operation doesn't get called for directories. The correct way to prevent
delegations on directories is to set the ->setlease() method in directory
file_operations to simple_nosetlease().
Fixes: e6d28ebc17 ("filelock: push the S_ISREG check down to ->setlease handlers")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260107-setlease-6-19-v1-2-85f034abcc57@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Make some preparatory cleanups prior to running a script to organise the
function declarations within the fs/smb/client/ headers. These include:
(1) Remove "inline" from the dummy cifs_proc_init/clean() functions as
they are in a .c file.
(2) Move should_compress()'s kdoc comment to the .c file and remove kdoc
markers from the comments.
(3) Rename CIFS_ALLOW_INSECURE_LEGACY in #endif comments to have CONFIG_
on the front to allow the script to recognise it.
(4) Don't let comments have bare words at the left margin as that confused
the simplistic function detection code in the script.
(5) Adjust some argument lists so that when and if the cleanup script is
run they don't end up over 100 chars.
(6) Fix a few comments to have missing '*' added or the "*/" moved to
their own lines so that checkpatch doesn't moan over the cleanup
script patch.
(7) Move struct cifs_calc_sig_ctx to cifsglob.h.
(8) Remove some __KERNEL__ conditionals.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove the server pointer from smb_message and instead pass it down to all
the things that access it.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com> (RDMA, smbdirect)
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Previously, the behavior of the multichannel and max_channels mount
options was inconsistent and order-dependent. For example, specifying
"multichannel,max_channels=1" would result in 2 channels, while
"max_channels=1,multichannel" would result in 1 channel. Additionally,
conflicting combinations such as "nomultichannel,max_channels=3" or
"multichannel,max_channels=1" did not produce errors and could lead to
unexpected channel counts.
This commit introduces two new fields in smb3_fs_context to explicitly
track whether multichannel and max_channels were specified during
mount. The option parsing and validation logic is updated to ensure:
- The outcome is no longer dependent on the order of options.
- Conflicting combinations (e.g., "nomultichannel,max_channels=3" or
"multichannel,max_channels=1") are detected and result in an error.
- The number of channels created is consistent with the specified
options.
This improves the reliability and predictability of mount option
handling for SMB3 multichannel support.
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Rajasi Mandal <rajasimandal@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZgAKCRCRxhvAZXjc
ooiEAPwNZfkqiSs6G1B2EmjFpMrA2BDqskaOsnN2sywra0sNewD9EQxJwlYXUn+z
nNUIAvmegJGg2OiU2UaNGwxMR3lR3w8=
=YELr
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.directory.delegations' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull directory delegations update from Christian Brauner:
"This contains the work for recall-only directory delegations for
knfsd.
Add support for simple, recallable-only directory delegations. This
was decided at the fall NFS Bakeathon where the NFS client and server
maintainers discussed how to merge directory delegation support.
The approach starts with recallable-only delegations for several reasons:
1. RFC8881 has gaps that are being addressed in RFC8881bis. In
particular, it requires directory position information for
CB_NOTIFY callbacks, which is difficult to implement properly
under Linux. The spec is being extended to allow that information
to be omitted.
2. Client-side support for CB_NOTIFY still lags. The client side
involves heuristics about when to request a delegation.
3. Early indication shows simple, recallable-only delegations can
help performance. Anna Schumaker mentioned seeing a multi-minute
speedup in xfstests runs with them enabled.
With these changes, userspace can also request a read lease on a
directory that will be recalled on conflicting accesses. This may be
useful for applications like Samba. Users can disable leases
altogether via the fs.leases-enable sysctl if needed.
VFS changes:
- Dedicated Type for Delegations
Introduce struct delegated_inode to track inodes that may have
delegations that need to be broken. This replaces the previous
approach of passing raw inode pointers through the delegation
breaking code paths, providing better type safety and clearer
semantics for the delegation machinery.
- Break parent directory delegations in open(..., O_CREAT) codepath
- Allow mkdir to wait for delegation break on parent
- Allow rmdir to wait for delegation break on parent
- Add try_break_deleg calls for parents to vfs_link(), vfs_rename(),
and vfs_unlink()
- Make vfs_create(), vfs_mknod(), and vfs_symlink() break delegations
on parent directory
- Clean up argument list for vfs_create()
- Expose delegation support to userland
Filelock changes:
- Make lease_alloc() take a flags argument
- Rework the __break_lease API to use flags
- Add struct delegated_inode
- Push the S_ISREG check down to ->setlease handlers
- Lift the ban on directory leases in generic_setlease
NFSD changes:
- Allow filecache to hold S_IFDIR files
- Allow DELEGRETURN on directories
- Wire up GET_DIR_DELEGATION handling
Fixes:
- Fix kernel-doc warnings in __fcntl_getlease
- Add needed headers for new struct delegation definition"
* tag 'vfs-6.19-rc1.directory.delegations' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: add needed headers for new struct delegation definition
filelock: __fcntl_getlease: fix kernel-doc warnings
vfs: expose delegation support to userland
nfsd: wire up GET_DIR_DELEGATION handling
nfsd: allow DELEGRETURN on directories
nfsd: allow filecache to hold S_IFDIR files
filelock: lift the ban on directory leases in generic_setlease
vfs: make vfs_symlink break delegations on parent dir
vfs: make vfs_mknod break delegations on parent directory
vfs: make vfs_create break delegations on parent directory
vfs: clean up argument list for vfs_create()
vfs: break parent dir delegations in open(..., O_CREAT) codepath
vfs: allow rmdir to wait for delegation break on parent
vfs: allow mkdir to wait for delegation break on parent
vfs: add try_break_deleg calls for parents to vfs_{link,rename,unlink}
filelock: push the S_ISREG check down to ->setlease handlers
filelock: add struct delegated_inode
filelock: rework the __break_lease API to use flags
filelock: make lease_alloc() take a flags argument
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZAAKCRCRxhvAZXjc
omMSAP9GLhavxyWQ24Q+49CNWWRQWDY1wTOiUK2BwtIvZ0YEcAD8D1dAiMckL5pC
RwEAVA5p+y+qi+bZP0KXCBxQddoTIQM=
=zo/J
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode updates from Christian Brauner:
"Features:
- Hide inode->i_state behind accessors. Open-coded accesses prevent
asserting they are done correctly. One obvious aspect is locking,
but significantly more can be checked. For example it can be
detected when the code is clearing flags which are already missing,
or is setting flags when it is illegal (e.g., I_FREEING when
->i_count > 0)
- Provide accessors for ->i_state, converts all filesystems using
coccinelle and manual conversions (btrfs, ceph, smb, f2fs, gfs2,
overlayfs, nilfs2, xfs), and makes plain ->i_state access fail to
compile
- Rework I_NEW handling to operate without fences, simplifying the
code after the accessor infrastructure is in place
Cleanups:
- Move wait_on_inode() from writeback.h to fs.h
- Spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
for clarity
- Cosmetic fixes to LRU handling
- Push list presence check into inode_io_list_del()
- Touch up predicts in __d_lookup_rcu()
- ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
- Assert on ->i_count in iput_final()
- Assert ->i_lock held in __iget()
Fixes:
- Add missing fences to I_NEW handling"
* tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
dcache: touch up predicts in __d_lookup_rcu()
fs: push list presence check into inode_io_list_del()
fs: cosmetic fixes to lru handling
fs: rework I_NEW handling to operate without fences
fs: make plain ->i_state access fail to compile
xfs: use the new ->i_state accessors
nilfs2: use the new ->i_state accessors
overlayfs: use the new ->i_state accessors
gfs2: use the new ->i_state accessors
f2fs: use the new ->i_state accessors
smb: use the new ->i_state accessors
ceph: use the new ->i_state accessors
btrfs: use the new ->i_state accessors
Manual conversion to use ->i_state accessors of all places not covered by coccinelle
Coccinelle-based conversion to use ->i_state accessors
fs: provide accessors for ->i_state
fs: spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
fs: move wait_on_inode() from writeback.h to fs.h
fs: add missing fences to I_NEW handling
ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
...
When nfsd starts requesting directory delegations, setlease handlers may
see requests for leases on directories. Push the !S_ISREG check down
into the non-trivial setlease handlers, so we can selectively enable
them where they're supported.
FUSE is special: It's the only filesystem that supports atomic_open and
allows kernel-internal leases. atomic_open is issued when the VFS
doesn't know the state of the dentry being opened. If the file doesn't
exist, it may be created, in which case the dir lease should be broken.
The existing kernel-internal lease implementation has no provision for
this. Ensure that we don't allow directory leases by default going
forward by explicitly disabling them there.
Reviewed-by: NeilBrown <neil@brown.name>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20251111-dir-deleg-ro-v6-4-52f3feebb2f2@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix typo in description of enable_gcm_256 module parameter
Suggested-by: Thomas Spear <speeddymon@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change generated with coccinelle and fixed up by hand as appropriate.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now that the SMB client accesses MD5, HMAC-MD5, HMAC-SHA256, and SHA-512
only via the library API and not via crypto_shash, allocating
crypto_shash objects for these algorithms is no longer necessary.
Remove all these allocations, their corresponding kconfig selections,
and their corresponding module soft dependencies.
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
AIO+DIO may extend the file size, hence we need to make sure ->i_size
is stable across the entire fallocate(2) operation, otherwise it would
become a truncate and then inode size reduced back down when it
finishes.
Fix this by calling netfs_wait_for_outstanding_io() right after
acquiring ->i_rwsem exclusively in cifs_fallocate() and then guarantee
a stable ->i_size across fallocate(2).
Also call netfs_wait_for_outstanding_io() after truncating pagecache
to avoid any potential races with writeback.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Fixes: 210627b0aca9 ("smb: client: fix missing timestamp updates with O_TRUNC")
Cc: Frank Sorenson <sorenson@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Add lightweight accounting for directory lease cache usage
to aid debugging and limiting cache size in future. Track
per-directory entry/byte counts and maintain per-tcon
aggregates. Also expose the totals in /proc/fs/cifs/open_dirs.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add write-only /sys/module/cifs/parameters/drop_dir_cache. Writing a
non-zero value iterates all tcons and calls invalidate_all_cached_dirs()
to drop cached directory entries. This is useful to force a dirent cache
drop across mounts for debugging and testing purpose.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQYgAKCRCRxhvAZXjc
olgGAQDWr4sD7kUt8TxifdAXsQNgyGG8qOUkb/BHHSqJ/5mKvAEAlTwJ+81tgNKT
hYYdPyvWdbgW6CnWeiQLi0JjpFvUPQU=
=uHwG
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs workqueue updates from Christian Brauner:
"This contains various workqueue changes affecting the filesystem
layer.
Currently if a user enqueue a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies
to schedule_work() that is using system_wq and queue_work(), that
makes use again of WORK_CPU_UNBOUND.
This replaces the use of system_wq and system_unbound_wq. system_wq is
a per-CPU workqueue which isn't very obvious from the name and
system_unbound_wq is to be used when locality is not required.
So this renames system_wq to system_percpu_wq, and system_unbound_wq
to system_dfl_wq.
This also adds a new WQ_PERCPU flag to allow the fs subsystem users to
explicitly request the use of per-CPU behavior. Both WQ_UNBOUND and
WQ_PERCPU flags coexist for one release cycle to allow callers to
transition their calls. WQ_UNBOUND will be removed in a next release
cycle"
* tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: WQ_PERCPU added to alloc_workqueue users
fs: replace use of system_wq with system_percpu_wq
fs: replace use of system_unbound_wq with system_dfl_wq
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQMQAKCRCRxhvAZXjc
omNLAQCgrwzd9sa1JTlixweu3OAxQlSEbLuMpEv7Ztm+B7Wz0AD9HtwPC44Kev03
GbMcB2DCFLC4evqYECj6IG7NBmoKsAs=
=1ICf
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This patch adds a new WQ_PERCPU flag to all the fs subsystem users to
explicitly request the use of the per-CPU behavior. Both flags coexist
for one release cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/20250916082906.77439-4-marco.crivellari@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
generic_delete_inode() is rather misleading for what the routine is
doing. inode_just_drop() should be much clearer.
The new naming is inconsistent with generic_drop_inode(), so rename that
one as well with inode_ as the suffix.
No functional changes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We were returning -EOPNOTSUPP for various remap_file_range cases
but for some of these the copy_file_range_syscall() requires -EINVAL
to be returned (e.g. where source and target file ranges overlap when
source and target are the same file). This fixes xfstest generic/157
which was expecting EINVAL for that (and also e.g. for when the src
offset is beyond end of file).
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
A kernel panic can be triggered by reading /proc/fs/cifs/debug_dirs.
The crash is a null-ptr-deref inside spin_lock(), caused by the use of the
uninitialized global spinlock cifs_tcp_ses_lock.
init_cifs()
└── cifs_proc_init()
└── // User can access /proc/fs/cifs/debug_dirs here
└── cifs_debug_dirs_proc_show()
└── spin_lock(&cifs_tcp_ses_lock); // Uninitialized!
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfff800000000000] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] SMP
Modules linked in:
CPU: 3 UID: 0 PID: 16435 Comm: stress-ng-procf Not tainted 6.16.0-10385-g79f14b5d84c6 #37 PREEMPT
Hardware name: QEMU KVM Virtual Machine, BIOS 2025.02-8ubuntu1 06/11/2025
pstate: 23400005 (nzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : do_raw_spin_lock+0x84/0x2cc
lr : _raw_spin_lock+0x24/0x34
sp : ffff8000966477e0
x29: ffff800096647860 x28: ffff800096647b88 x27: ffff0001c0c22070
x26: ffff0003eb2b60c8 x25: ffff0001c0c22018 x24: dfff800000000000
x23: ffff0000f624e000 x22: ffff0003eb2b6020 x21: ffff0000f624e768
x20: 0000000000000004 x19: 0000000000000000 x18: 0000000000000000
x17: 0000000000000000 x16: ffff8000804b9600 x15: ffff700012cc8f04
x14: 1ffff00012cc8f04 x13: 0000000000000004 x12: ffffffffffffffff
x11: 1ffff00012cc8f00 x10: ffff80008d9af0d2 x9 : f3f3f304f1f1f1f1
x8 : 0000000000000000 x7 : 7365733c203e6469 x6 : 20656572743c2023
x5 : ffff0000e0ce0044 x4 : ffff80008a4deb6e x3 : ffff8000804b9718
x2 : 0000000000000001 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
do_raw_spin_lock+0x84/0x2cc (P)
_raw_spin_lock+0x24/0x34
cifs_debug_dirs_proc_show+0x1ac/0x4c0
seq_read_iter+0x3b0/0xc28
proc_reg_read_iter+0x178/0x2a8
vfs_read+0x5f8/0x88c
ksys_read+0x120/0x210
__arm64_sys_read+0x7c/0x90
invoke_syscall+0x98/0x2b8
el0_svc_common+0x130/0x23c
do_el0_svc+0x48/0x58
el0_svc+0x40/0x140
el0t_64_sync_handler+0x84/0x12c
el0t_64_sync+0x1ac/0x1b0
Code: aa0003f3 f9000feb f2fe7e69 f8386969 (38f86908)
---[ end trace 0000000000000000 ]---
The root cause is an initialization order problem. The lock is declared
as a global variable and intended to be initialized during module startup.
However, the procfs entry that uses this lock can be accessed by userspace
before the spin_lock_init() call has run. This creates a race window where
reading the proc file will attempt to use the lock before it is
initialized, leading to the crash.
For a global lock with a static lifetime, the correct and robust approach
is to use compile-time initialization.
Fixes: 844e5c0eb1 ("smb3 client: add way to show directory leases for improved debugging")
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB3.1.1 POSIX mounts require symlinks to be created natively with
IO_REPARSE_TAG_SYMLINK reparse point.
Cc: linux-cifs@vger.kernel.org
Cc: Ralph Boehme <slow@samba.org>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Reported-by: Matthew Richardson <m.richardson@ed.ac.uk>
Closes: https://marc.info/?i=1124e7cd-6a46-40a6-9f44-b7664a66654b@ed.ac.uk
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCgQAKCRCRxhvAZXjc
os+nAP9LFHUwWO6EBzHJJGEVjJvvzsbzqeYrRFamYiMc5ulPJwD+KW4RIgJa/MWO
pcYE40CacaekD8rFWwYUyszpgmv6ewc=
=wCwp
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull mmap_prepare updates from Christian Brauner:
"Last cycle we introduce f_op->mmap_prepare() in c84bf6dd2b ("mm:
introduce new .mmap_prepare() file callback").
This is preferred to the existing f_op->mmap() hook as it does require
a VMA to be established yet, thus allowing the mmap logic to invoke
this hook far, far earlier, prior to inserting a VMA into the virtual
address space, or performing any other heavy handed operations.
This allows for much simpler unwinding on error, and for there to be a
single attempt at merging a VMA rather than having to possibly
reattempt a merge based on potentially altered VMA state.
Far more importantly, it prevents inappropriate manipulation of
incompletely initialised VMA state, which is something that has been
the cause of bugs and complexity in the past.
The intent is to gradually deprecate f_op->mmap, and in that vein this
series coverts the majority of file systems to using f_op->mmap_prepare.
Prerequisite steps are taken - firstly ensuring all checks for mmap
capabilities use the file_has_valid_mmap_hooks() helper rather than
directly checking for f_op->mmap (which is now not a valid check) and
secondly updating daxdev_mapping_supported() to not require a VMA
parameter to allow ext4 and xfs to be converted.
Commit bb666b7c27 ("mm: add mmap_prepare() compatibility layer for
nested file systems") handles the nasty edge-case of nested file
systems like overlayfs, which introduces a compatibility shim to allow
f_op->mmap_prepare() to be invoked from an f_op->mmap() callback.
This allows for nested filesystems to continue to function correctly
with all file systems regardless of which callback is used. Once we
finally convert all file systems, this shim can be removed.
As a result, ecryptfs, fuse, and overlayfs remain unaltered so they
can nest all other file systems.
We additionally do not update resctl - as this requires an update to
remap_pfn_range() (or an alternative to it) which we defer to a later
series, equally we do not update cramfs which needs a mixed mapping
insertion with the same issue, nor do we update procfs, hugetlbfs,
syfs or kernfs all of which require VMAs for internal state and hooks.
We shall return to all of these later"
* tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: update porting, vfs documentation to describe mmap_prepare()
fs: replace mmap hook with .mmap_prepare for simple mappings
fs: convert most other generic_file_*mmap() users to .mmap_prepare()
fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()
mm/filemap: introduce generic_file_*_mmap_prepare() helpers
fs/xfs: transition from deprecated .mmap hook to .mmap_prepare
fs/ext4: transition from deprecated .mmap hook to .mmap_prepare
fs/dax: make it possible to check dev dax support without a VMA
fs: consistently use can_mmap_file() helper
mm/nommu: use file_has_valid_mmap_hooks() helper
mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare
Update nearly all generic_file_mmap() and generic_file_readonly_mmap()
callers to use generic_file_mmap_prepare() and
generic_file_readonly_mmap_prepare() respectively.
We update blkdev, 9p, afs, erofs, ext2, nfs, ntfs3, smb, ubifs and vboxsf
file systems this way.
Remaining users we cannot yet update are ecryptfs, fuse and cramfs. The
former two are nested file systems that must support any underlying file
ssytem, and cramfs inserts a mixed mapping which currently requires a VMA.
Once all file systems have been converted to mmap_prepare(), we can then
update nested file systems.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/08db85970d89b17a995d2cffae96fb4cc462377f.1750099179.git.lorenzo.stoakes@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
... to be used instead of manually assigning to ->s_d_op.
All in-tree filesystem converted (and field itself is renamed,
so any out-of-tree ones in need of conversion will be caught
by compiler).
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=J2E/
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc-part1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- multichannel fixes (mostly reconnect related), and clarification of
locking documentation
- automount null pointer check fix
- fixes to add support for ParentLeaseKey
- minor cleanup
- smb1/cifs fixes
* tag 'v6.16-rc-part1-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update the lock ordering comments with new mutex
cifs: dns resolution is needed only for primary channel
cifs: update dstaddr whenever channel iface is updated
cifs: reset connections for all channels when reconnect requested
smb: client: use ParentLeaseKey in cifs_do_create
smb: client: use ParentLeaseKey in open_cached_dir
smb: client: add ParentLeaseKey support
cifs: Fix cifs_query_path_info() for Windows NT servers
cifs: Fix validation of SMB1 query reparse point response
cifs: Correctly set SMB1 SessionKey field in Session Setup Request
cifs: Fix encoding of SMB1 Session Setup NTLMSSP Request in non-UNICODE mode
smb: client: add NULL check in automount_fullpath
smb: client: Remove an unused function and variable
SMB2_QFS_info() has been unused since 2018's
commit 730928c8f4 ("cifs: update smb2_queryfs() to use compounding")
sign_CIFS_PDUs has been unused since 2009's
commit 2edd6c5b05 ("[CIFS] NTLMSSP support moving into new file, old dead
code removed")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The lookup_one_len family of functions is (now) only used internally by
a filesystem on itself either
- in a context where permission checking is irrelevant such as by a
virtual filesystem populating itself, or xfs accessing its ORPHANAGE
or dquota accessing the quota file; or
- in a context where a permission check (MAY_EXEC on the parent) has just
been performed such as a network filesystem finding in "silly-rename"
file in the same directory. This is also the context after the
_parentat() functions where currently lookup_one_qstr_excl() is used.
So the permission check is pointless.
The name "one_len" is unhelpful in understanding the purpose of these
functions and should be changed. Most of the callers pass the len as
"strlen()" so using a qstr and QSTR() can simplify the code.
This patch renames these functions (include lookup_positive_unlocked()
which is part of the family despite the name) to have a name based on
"lookup_noperm". They are changed to receive a 'struct qstr' instead
of separate name and len. In a few cases the use of QSTR() results in a
new call to strlen().
try_lookup_noperm() takes a pointer to a qstr instead of the whole
qstr. This is consistent with d_hash_and_lookup() (which is nearly
identical) and useful for lookup_noperm_unlocked().
The new lookup_noperm_common() doesn't take a qstr yet. That will be
tidied up in a subsequent patch.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/r/20250319031545.2999807-5-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
SMB1 protocol supports non-UNICODE (8-bit OEM character set) and
UNICODE (UTF-16) modes.
Linux SMB1 client implements both of them but currently does not allow to
choose non-UNICODE mode when SMB1 server announce UNICODE mode support.
This change adds a new mount option -o nounicode to disable UNICODE mode
and force usage of non-UNICODE (8-bit OEM character set) mode.
This allows to test non-UNICODE implementation of Linux SMB1 client against
any SMB1 server, including modern and recent Windows SMB1 server.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Native Windows sockets created by WinSock on Windows 10 April 2018 Update
(version 1803) or Windows Server 2019 (version 1809) or later versions is
reparse point with IO_REPARSE_TAG_AF_UNIX tag, with empty reparse point
data buffer and without any EAs.
Create AF_UNIX sockets in this native format if -o nonativesocket was not
specified.
This change makes AF_UNIX sockets created by Linux CIFS client compatible
with AF_UNIX sockets created by Windows applications on NTFS volumes.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently Linux CIFS client creates a new symlink of the first flavor which
is allowed by mount options, parsed in this order: -o (no)mfsymlinks,
-o (no)sfu, -o (no)unix (+ its aliases) and -o reparse=[type].
Introduce a new mount option -o symlink= for explicitly choosing a symlink
flavor. Possible options are:
-o symlink=default - The default behavior, like before this change.
-o symlink=none - Disallow creating a new symlinks
-o symlink=native - Create as native SMB symlink reparse point
-o symlink=unix - Create via SMB1 unix extension command
-o symlink=mfsymlinks - Create as regular file of mfsymlinks format
-o symlink=sfu - Create as regular system file of SFU format
-o symlink=nfs - Create as NFS reparse point
-o symlink=wsl - Create as WSL reparse point
So for example specifying -o sfu,mfsymlinks,symlink=native will allow to
parse symlinks also of SFU and mfsymlinks types (which are disabled by
default unless mount option is explicitly specified), but new symlinks will
be created under native SMB type (which parsing is always enabled).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace default hardcoded value for cifsAttrs with ATTR_ARCHIVE macro
Use SMB2_LEASE_KEY_SIZE macro for leasekey size in smb2_lease_break
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The unmount process (cifs_kill_sb() calling close_all_cached_dirs()) can
race with various cached directory operations, which ultimately results
in dentries not being dropped and these kernel BUGs:
BUG: Dentry ffff88814f37e358{i=1000000000080,n=/} still in use (2) [unmount of cifs cifs]
VFS: Busy inodes after unmount of cifs (cifs)
------------[ cut here ]------------
kernel BUG at fs/super.c:661!
This happens when a cfid is in the process of being cleaned up when, and
has been removed from the cfids->entries list, including:
- Receiving a lease break from the server
- Server reconnection triggers invalidate_all_cached_dirs(), which
removes all the cfids from the list
- The laundromat thread decides to expire an old cfid.
To solve these problems, dropping the dentry is done in queued work done
in a newly-added cfid_put_wq workqueue, and close_all_cached_dirs()
flushes that workqueue after it drops all the dentries of which it's
aware. This is a global workqueue (rather than scoped to a mount), but
the queued work is minimal.
The final cleanup work for cleaning up a cfid is performed via work
queued in the serverclose_wq workqueue; this is done separate from
dropping the dentries so that close_all_cached_dirs() doesn't block on
any server operations.
Both of these queued works expect to invoked with a cfid reference and
a tcon reference to avoid those objects from being freed while the work
is ongoing.
While we're here, add proper locking to close_all_cached_dirs(), and
locking around the freeing of cfid->dentry.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Aurich <paul@darkrain42.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In the current implementation, the SMB filesystem on a mount point can
trigger upcalls from the kernel to the userspace to enable certain
functionalities like spnego, dns_resolution, amongst others. These upcalls
usually either happen in the context of the mount or in the context of an
application/user. The upcall handler for cifs, cifs.upcall already has
existing code which switches the namespaces to the caller's namespace
before handling the upcall. This behaviour is expected for scenarios like
multiuser mounts, but might not cover all single user scenario with
services such as Kubernetes, where the mount can happen from different
locations such as on the host, from an app container, or a driver pod
which does the mount on behalf of a different pod.
This patch introduces a new mount option called upcall_target, to
customise the upcall behaviour. upcall_target can take 'mount' and 'app'
as possible values. This aids use cases like Kubernetes where the mount
happens on behalf of the application in another container altogether.
Having this new mount option allows the mount command to specify where the
upcall should happen: 'mount' for resolving the upcall to the host
namespace, and 'app' for resolving the upcall to the ns of the calling
thread. This will enable both the scenarios where the Kerberos credentials
can be found on the application namespace or the host namespace to which
just the mount operation is "delegated".
Reviewed-by: Shyam Prasad <shyam.prasad@microsoft.com>
Reviewed-by: Bharath S M <bharathsm@microsoft.com>
Reviewed-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There's a issue as follows:
WARNING: CPU: 1 PID: 27826 at mm/slub.c:4698 free_large_kmalloc+0xac/0xe0
RIP: 0010:free_large_kmalloc+0xac/0xe0
Call Trace:
<TASK>
? __warn+0xea/0x330
mempool_destroy+0x13f/0x1d0
init_cifs+0xa50/0xff0 [cifs]
do_one_initcall+0xdc/0x550
do_init_module+0x22d/0x6b0
load_module+0x4e96/0x5ff0
init_module_from_file+0xcd/0x130
idempotent_init_module+0x330/0x620
__x64_sys_finit_module+0xb3/0x110
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Obviously, 'cifs_io_request_pool' is not created by mempool_create().
So just use mempool_exit() to revert 'cifs_io_request_pool'.
Fixes: edea94a697 ("cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Acked-by: David Howells <dhowells@redhat.com
Signed-off-by: Steve French <stfrench@microsoft.com>
Due to server permission control, the client does not have access to
the shared root directory, but can access subdirectories normally, so
users usually mount the shared subdirectories directly. In this case,
queryfs should use the actual path instead of the root directory to
avoid the call returning an error (EACCES).
Signed-off-by: wangrong <wangrong@uniontech.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix cifs_file_copychunk_range() to flush the destination region before
invalidating it to avoid potential loss of data should the copy fail, in
whole or in part, in some way.
Fixes: 7b2404a886 ("cifs: Fix flushing, invalidation and file size with copy_file_range()")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
The comments have typos, fix that to not confuse readers.
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Dan Carpenter reported a Smack static checker warning:
fs/smb/client/cifsfs.c:1981 init_cifs()
error: we previously assumed 'serverclose_wq' could be null (see line 1895)
The patch which introduced the serverclose workqueue used the wrong
oredering in error paths in init_cifs() for freeing it on errors.
Fixes: 173217bd73 ("smb3: retrying on failed server close")
Cc: stable@vger.kernel.org
Cc: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Howells <dhowell@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are common cases where copy_file_range can noisily
log "source and target of copy not on same server"
e.g. the mv command across mounts to two different server's shares.
Change this to informational rather than logging as an error.
A followon patch will add dynamic trace points e.g. for
cifs_file_copychunk_range
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
enable_gcm_256 (which allows the server to require the strongest
encryption) is enabled by default, but the modinfo description
incorrectly showed it disabled by default. Fix the typo.
Cc: stable@vger.kernel.org
Fixes: fee742b502 ("smb3.1.1: enable negotiating stronger encryption by default")
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZlRqlgAKCRCRxhvAZXjc
os5tAQC6o3f2X39FooKv4bbbQkBXx5x8GqjUZyfnYjbm+Mak7wD/cf8tm4LLvVLt
1g7FbakWkEyQKhPRBMhtngX1GdKiuQI=
=Isax
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix io_uring based write-through after converting cifs to use the
netfs library
- Fix aio error handling when doing write-through via netfs library
- Fix performance regression in iomap when used with non-large folio
mappings
- Fix signalfd error code
- Remove obsolete comment in signalfd code
- Fix async request indication in netfs_perform_write() by raising
BDP_ASYNC when IOCB_NOWAIT is set
- Yield swap device immediately to prevent spurious EBUSY errors
- Don't cross a .backup mountpoint from backup volumes in afs to avoid
infinite loops
- Fix a race between umount and async request completion in 9p after 9p
was converted to use the netfs library
* tag 'vfs-6.10-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs, 9p: Fix race between umount and async request completion
afs: Don't cross .backup mountpoint from backup volume
swap: yield device immediately
netfs: Fix setting of BDP_ASYNC from iocb flags
signalfd: drop an obsolete comment
signalfd: fix error return code
iomap: fault in smaller chunks for non-large folio mappings
filemap: add helper mapping_max_folio_size()
netfs: Fix AIO error handling when doing write-through
netfs: Fix io_uring based write-through
