- Add support for control flow integrity for userspace processes.
This is based on the standard RISC-V ISA extensions Zicfiss and
Zicfilp
- Improve ptrace behavior regarding vector registers, and add some selftests
- Optimize our strlen() assembly
- Enable the ISO-8859-1 code page as built-in, similar to ARM64, for EFI
volume mounting
- Clean up some code slightly, including defining copy_user_page() as
copy_page() rather than memcpy(), aligning us with other
architectures; and using max3() to slightly simplify an expression
in riscv_iommu_init_check()
-----BEGIN PGP SIGNATURE-----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=4fTk
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Add support for control flow integrity for userspace processes.
This is based on the standard RISC-V ISA extensions Zicfiss and
Zicfilp
- Improve ptrace behavior regarding vector registers, and add some
selftests
- Optimize our strlen() assembly
- Enable the ISO-8859-1 code page as built-in, similar to ARM64, for
EFI volume mounting
- Clean up some code slightly, including defining copy_user_page() as
copy_page() rather than memcpy(), aligning us with other
architectures; and using max3() to slightly simplify an expression
in riscv_iommu_init_check()
* tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: lib: optimize strlen loop efficiency
selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function
selftests: riscv: verify ptrace accepts valid vector csr values
selftests: riscv: verify ptrace rejects invalid vector csr inputs
selftests: riscv: verify syscalls discard vector context
selftests: riscv: verify initial vector state with ptrace
selftests: riscv: test ptrace vector interface
riscv: ptrace: validate input vector csr registers
riscv: csr: define vtype register elements
riscv: vector: init vector context with proper vlenb
riscv: ptrace: return ENODATA for inactive vector extension
kselftest/riscv: add kselftest for user mode CFI
riscv: add documentation for shadow stack
riscv: add documentation for landing pad / indirect branch tracking
riscv: create a Kconfig fragment for shadow stack and landing pad support
arch/riscv: add dual vdso creation logic and select vdso based on hw
arch/riscv: compile vdso with landing pad and shadow stack note
riscv: enable kernel access to shadow stack memory via the FWFT SBI call
riscv: add kernel command line option to opt out of user CFI
riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe
...
- Implement masked user access
- Add support for internal only per-CPU instructions and inline the bpf_get_smp_processor_id() and bpf_get_current_task()
- Fix pSeries MSI-X allocation failure when quota is exceeded
- Fix recursive pci_lock_rescan_remove locking in EEH event handling
- Support tailcalls with subprogs & BPF exceptions on 64bit
- Extend "trusted" keys to support the PowerVM Key Wrapping Module (PKWM)
Thanks to: Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li, Jarkko
Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam Cao, Narayana
Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket Kumar Bhaskar, Sourabh
Jain, Srish Srinivasan, Venkat Rao Bagalkote,
-----BEGIN PGP SIGNATURE-----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=zJoL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates for 7.0
- Implement masked user access
- Add bpf support for internal only per-CPU instructions and inline the
bpf_get_smp_processor_id() and bpf_get_current_task() functions
- Fix pSeries MSI-X allocation failure when quota is exceeded
- Fix recursive pci_lock_rescan_remove locking in EEH event handling
- Support tailcalls with subprogs & BPF exceptions on 64bit
- Extend "trusted" keys to support the PowerVM Key Wrapping Module
(PKWM)
Thanks to Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li,
Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam
Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket
Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, and Venkat Rao Bagalkote.
* tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (27 commits)
powerpc/pseries: plpks: export plpks_wrapping_is_supported
docs: trusted-encryped: add PKWM as a new trust source
keys/trusted_keys: establish PKWM as a trusted source
pseries/plpks: add HCALLs for PowerVM Key Wrapping Module
pseries/plpks: expose PowerVM wrapping features via the sysfs
powerpc/pseries: move the PLPKS config inside its own sysfs directory
pseries/plpks: fix kernel-doc comment inconsistencies
powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()
powerpc: kgdb: Remove OUTBUFMAX constant
powerpc64/bpf: Additional NVR handling for bpf_throw
powerpc64/bpf: Support exceptions
powerpc64/bpf: Add arch_bpf_stack_walk() for BPF JIT
powerpc64/bpf: Avoid tailcall restore from trampoline
powerpc64/bpf: Support tailcalls with subprogs
powerpc64/bpf: Moving tail_call_cnt to bottom of frame
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded
powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory
powerpc64/bpf: Inline bpf_get_smp_processor_id() and bpf_get_current_task/_btf()
powerpc64/bpf: Support internal-only MOV instruction to resolve per-CPU addrs
...
* Update IOMMU docs to use stable identifiers
* Print unhashed pointers on fatal stack overflows
-----BEGIN PGP SIGNATURE-----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=Rqoq
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"The usual smattering of x86/misc changes.
The IPv6 patch in here surprised me in a couple of ways. First, the
function it inlines is able to eat a lot more CPU time than I would
have expected. Second, the inlining does not seem to bloat the kernel,
at least in the configs folks have tested.
- Inline x86-specific IPv6 checksum helper
- Update IOMMU docs to use stable identifiers
- Print unhashed pointers on fatal stack overflows"
* tag 'x86_misc_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Print unhashed pointers on stack overflow
Documentation/x86: Update IOMMU spec references to use stable identifiers
x86/lib: Inline csum_ipv6_magic()
fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for patch
submissions, and a separate document intended for consumption by
generative tools.
- The completion of the move of the documentation tools to tools/docs. For
now we're leaving a /scripts/kernel-doc symlink behind to avoid breaking
scripts.
- Ongoing build-system work includes the incorporation of documentation in
Python code, better support for documenting variables, and lots of
improvements and fixes.
- Automatic linking of man-page references -- cat(1), for example -- to
the online pages in the HTML build.
...and the usual array of typo fixes and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmmKM8YPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YLK4H/2gqVxY8wKbVymiB95/zudiba8EtWlKE4hZl
KAd4+csZ8RCTMxHJLI23FXOi56CYr3XOQol0DIDUGimQiQx/Cxa2QDWewpkqbNH1
tHPTaNWAj16wKzrZxXhWt+6FoBHd7wrqilLH180IRmezRhu+7kURQ5XEAAXfK08B
CfDXBsCpnGsKn+m72x04cpvnsf/iK3pznbKrZ0ZYGIoaZb6+BV3+jqVaLROWSQZt
Nvt1rYjsi0vaeNapbQL8q72UJ/+zO4nK9am13s7p20zD+jUVY48yfQB/ZqvHp/1L
aymcJUCq0h5sSOHnfSqY5MTZUR/0CK+npRcEPgDYzLBigc9XU9g=
=hHq1
-----END PGP SIGNATURE-----
Merge tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
ACPI:
- Add interrupt signalling support to the AGDI handler.
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry.
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime).
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V).
- Reduce MTE overhead when executing in the kernel on Ampere CPUs.
- Ensure POR_EL0 value exposed via ptrace is up-to-date.
- Fix error handling on GCS allocation failure.
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver.
Entry code:
- Minor optimisations and cleanups to the syscall entry path.
- Preparatory rework for moving to the generic syscall entry code.
Hardware errata:
- Work around Spectre-BHB on TSV110 processors.
- Work around broken CMO propagation on some systems with the SI-L1
interconnect.
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with noinstr.
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression).
- Fix custom __READ_ONCE() implementation for LTO builds when operating
on non-atomic types.
Perf and PMUs:
- Support for CMN-600AE.
- Be stricter about supported hardware in the CMN driver.
- Support for DSU-110 and DSU-120.
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter).
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver.
- Use !bitmap_empty() as a faster alternative to bitmap_weight().
- Fix SPE error handling when failing to resume profiling.
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests.
- Avoid nolibc-specific my_syscall() function.
- Add basic test for the LS64 HWCAP.
- Extend fp-pidbench to cover additional workload patterns.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmmJ16QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFO0CACxYy5klTAdqB+RjhxSbibZ6mmch/mX3zLl
qBp0HeKuwSv+EWEblmr6KMrr/S5YjtEMboOC7GnmEdSeM6hucu5gPiEb7bIDQfbB
5KJXoUlN1C+7Na4CimfordWiHIZw2d7mTumJcnsqMo7XN83t+4yqs98sET7WRCy5
WUyqHH/dGZsGcsBMrRRO3UriHCpU425GE0jopF5OkwCs4dwyUVIV8SmZtK4Ovi3u
Kin75UYgeVum8A218oHosTfYTBt4p/cSdfVVv5f3P14Q7lIstyJR7ZDqepTP2XSJ
95W3nuMfOT1lx7f6pqvHc+4Ccl/+DQnbW1PWwv8f3nXAKVVMafWf
=3SfC
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a little less than normal, probably due to LPC & Christmas/New
Year meaning that a few series weren't quite ready or reviewed in
time. It's still useful across the board, despite the only real
feature being support for the LS64 feature enabling 64-byte atomic
accesses to endpoints that support it.
ACPI:
- Add interrupt signalling support to the AGDI handler
- Add Catalin and myself to the arm64 ACPI MAINTAINERS entry
CPU features:
- Drop Kconfig options for PAN and LSE (these are detected at runtime)
- Add support for 64-byte single-copy atomic instructions (LS64/LS64V)
- Reduce MTE overhead when executing in the kernel on Ampere CPUs
- Ensure POR_EL0 value exposed via ptrace is up-to-date
- Fix error handling on GCS allocation failure
CPU frequency:
- Add CPU hotplug support to the FIE setup in the AMU driver
Entry code:
- Minor optimisations and cleanups to the syscall entry path
- Preparatory rework for moving to the generic syscall entry code
Hardware errata:
- Work around Spectre-BHB on TSV110 processors
- Work around broken CMO propagation on some systems with the SI-L1
interconnect
Miscellaneous:
- Disable branch profiling for arch/arm64/ to avoid issues with
noinstr
- Minor fixes and cleanups (kexec + ubsan, WARN_ONCE() instead of
WARN_ON(), reduction of boolean expression)
- Fix custom __READ_ONCE() implementation for LTO builds when
operating on non-atomic types
Perf and PMUs:
- Support for CMN-600AE
- Be stricter about supported hardware in the CMN driver
- Support for DSU-110 and DSU-120
- Support for the cycles event in the DSU driver (alongside the
dedicated cycles counter)
- Use IRQF_NO_THREAD instead of IRQF_ONESHOT in the cxlpmu driver
- Use !bitmap_empty() as a faster alternative to bitmap_weight()
- Fix SPE error handling when failing to resume profiling
Selftests:
- Add support for the FORCE_TARGETS option to the arm64 kselftests
- Avoid nolibc-specific my_syscall() function
- Add basic test for the LS64 HWCAP
- Extend fp-pidbench to cover additional workload patterns"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (43 commits)
perf/arm-cmn: Reject unsupported hardware configurations
perf: arm_spe: Properly set hw.state on failures
arm64/gcs: Fix error handling in arch_set_shadow_stack_status()
arm64: Fix non-atomic __READ_ONCE() with CONFIG_LTO=y
arm64: poe: fix stale POR_EL0 values for ptrace
kselftest/arm64: Raise default number of loops in fp-pidbench
kselftest/arm64: Add a no-SVE loop after SVE in fp-pidbench
perf/cxlpmu: Replace IRQF_ONESHOT with IRQF_NO_THREAD
arm64: mte: Set TCMA1 whenever MTE is present in the kernel
arm64/ptrace: Return early for ptrace_report_syscall_entry() error
arm64/ptrace: Split report_syscall()
arm64: Remove unused _TIF_WORK_MASK
kselftest/arm64: Add missing file in .gitignore
arm64: errata: Workaround for SI L1 downstream coherency issue
kselftest/arm64: Add HWCAP test for FEAT_LS64
arm64: Add support for FEAT_{LS64, LS64_V}
KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest
arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1
KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory
KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B
...
- Drop support for outdated 3590/3592 and 3480 tape devices, and limit
support to virtualized 3490E types devices
- Implement exception based WARN() and WARN_ONCE() similar to x86
- Slightly optimize preempt primitives like __preempt_count_add() and
__preempt_count_dec_and_test()
- A couple of small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=xeBU
-----END PGP SIGNATURE-----
Merge tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Drop support for outdated 3590/3592 and 3480 tape devices, and limit
support to virtualized 3490E types devices
- Implement exception based WARN() and WARN_ONCE() similar to x86
- Slightly optimize preempt primitives like __preempt_count_add() and
__preempt_count_dec_and_test()
- A couple of small fixes and improvements
* tag 's390-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (35 commits)
s390/tape: Consolidate tape config options and modules
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
s390/tape: Rename tape_34xx.c to tape_3490.c
s390/tape: Cleanup sense data analysis and error handling
s390/tape: Remove 3480 tape device type
s390/tape: Remove unused command definitions
s390/tape: Remove special block id handling
s390/tape: Remove tape load display support
s390/tape: Remove support for 3590/3592 models
s390/kexec: Emit an error message when cmdline is too long
s390/configs: Enable BLK_DEV_NULL_BLK as module
s390: Document s390 stackprotector support
s390/perf: Disable register readout on sampling events
s390/Kconfig: Define non-zero ILLEGAL_POINTER_VALUE
s390/bug: Prevent tail-call optimization
s390/bug: Skip __WARN_trap() in call traces
s390/bug: Implement WARN_ONCE()
s390/bug: Implement __WARN_printf()
s390/traps: Copy monitor code to pt_regs
s390/bug: Introduce and use monitor code macro
...
affinity of unbound kthreads (node or custom cpumask) against
housekeeping (CPU isolation) constraints and CPU hotplug events.
One crucial missing piece is the handling of cpuset: when an isolated
partition is created, deleted, or its CPUs updated, all the unbound
kthreads in the top cpuset become indifferently affine to _all_ the
non-isolated CPUs, possibly breaking their preferred affinity along
the way.
Solve this with performing the kthreads affinity update from cpuset to
the kthreads consolidated relevant code instead so that preferred
affinities are honoured and applied against the updated cpuset isolated
partitions.
The dispatch of the new isolated cpumasks to timers, workqueues and
kthreads is performed by housekeeping, as per the nice Tejun's
suggestion.
As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set
from boot defined domain isolation (through isolcpus=) and cpuset
isolated partitions. Housekeeping cpumasks are now modifiable with a
specific RCU based synchronization. A big step toward making nohz_full=
also mutable through cpuset in the future.
-----BEGIN PGP SIGNATURE-----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=nWGh
-----END PGP SIGNATURE-----
Merge tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull kthread updates from Frederic Weisbecker:
"The kthread code provides an infrastructure which manages the
preferred affinity of unbound kthreads (node or custom cpumask)
against housekeeping (CPU isolation) constraints and CPU hotplug
events.
One crucial missing piece is the handling of cpuset: when an isolated
partition is created, deleted, or its CPUs updated, all the unbound
kthreads in the top cpuset become indifferently affine to _all_ the
non-isolated CPUs, possibly breaking their preferred affinity along
the way.
Solve this with performing the kthreads affinity update from cpuset to
the kthreads consolidated relevant code instead so that preferred
affinities are honoured and applied against the updated cpuset
isolated partitions.
The dispatch of the new isolated cpumasks to timers, workqueues and
kthreads is performed by housekeeping, as per the nice Tejun's
suggestion.
As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set
from boot defined domain isolation (through isolcpus=) and cpuset
isolated partitions. Housekeeping cpumasks are now modifiable with a
specific RCU based synchronization. A big step toward making
nohz_full= also mutable through cpuset in the future"
* tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (33 commits)
doc: Add housekeeping documentation
kthread: Document kthread_affine_preferred()
kthread: Comment on the purpose and placement of kthread_affine_node() call
kthread: Honour kthreads preferred affinity after cpuset changes
sched/arm64: Move fallback task cpumask to HK_TYPE_DOMAIN
sched: Switch the fallback task allowed cpumask to HK_TYPE_DOMAIN
kthread: Rely on HK_TYPE_DOMAIN for preferred affinity management
kthread: Include kthreadd to the managed affinity list
kthread: Include unbound kthreads in the managed affinity list
kthread: Refine naming of affinity related fields
PCI: Remove superfluous HK_TYPE_WQ check
sched/isolation: Remove HK_TYPE_TICK test from cpu_is_isolated()
cpuset: Remove cpuset_cpu_is_isolated()
timers/migration: Remove superfluous cpuset isolation test
cpuset: Propagate cpuset isolation update to timers through housekeeping
cpuset: Propagate cpuset isolation update to workqueue through housekeeping
PCI: Flush PCI probe workqueue on cpuset isolated partition change
sched/isolation: Flush vmstat workqueues on cpuset isolated partition change
sched/isolation: Flush memcg workqueues on cpuset isolated partition change
cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset
...
When none of the allowed CPUs of a task are online, it gets migrated
to the fallback cpumask which is all the non nohz_full CPUs.
However just like nohz_full CPUs, domain isolated CPUs don't want to be
disturbed by tasks that have lost their CPU affinities.
And since nohz_full rely on domain isolation to work correctly, the
housekeeping mask of domain isolated CPUs should always be a subset of
the housekeeping mask of nohz_full CPUs (there can be CPUs that are
domain isolated but not nohz_full, OTOH there shouldn't be nohz_full
CPUs that are not domain isolated):
HK_TYPE_DOMAIN & HK_TYPE_KERNEL_NOISE == HK_TYPE_DOMAIN
Therefore use HK_TYPE_DOMAIN as the appropriate fallback target for
tasks. Note that cpuset isolated partitions are not supported on those
systems and may result in undefined behaviour.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rhys Tumelty <rhys@tumelty.co.uk>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260128220233.179439-1-rhys@tumelty.co.uk>
The hypervisor generated wrapping key is an AES-GCM-256 symmetric key which
is stored in a non-volatile, secure, and encrypted storage called the Power
LPAR Platform KeyStore. It has policy based protections that prevent it
from being read out or exposed to the user.
Implement H_PKS_GEN_KEY, H_PKS_WRAP_OBJECT, and H_PKS_UNWRAP_OBJECT HCALLs
to enable using the PowerVM Key Wrapping Module (PKWM) as a new trust
source for trusted keys. Disallow H_PKS_READ_OBJECT, H_PKS_SIGNED_UPDATE,
and H_PKS_WRITE_OBJECT for objects with the 'wrapping key' policy set.
Capture the availability status for the H_PKS_WRAP_OBJECT interface.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-5-ssrish@linux.ibm.com
Add documentation on shadow stack for user mode on riscv and the kernel
interfaces exposed for user tasks to enable it.
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-27-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up the documentation, patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add documentation on landing pad aka indirect branch tracking on riscv
and the kernel interfaces exposed for user tasks to enable it.
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-26-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up the documentation]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
We've run out of bits to describe RISC-V ISA extensions in our initial
hwprobe key, RISCV_HWPROBE_KEY_IMA_EXT_0. So, let's add
RISCV_HWPROBE_KEY_IMA_EXT_1, along with the framework to set the
appropriate hwprobe tuple, and add testing for it.
Based on a suggestion from Andrew Jones <andrew.jones@oss.qualcomm.com>,
also fix the documentation for RISCV_HWPROBE_KEY_IMA_EXT_0.
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Define CONFIG_ILLEGAL_POINTER_VALUE to the eye-catching non-zero value
of 0xdead000000000000, consistent with other architectures. Assert at
compile-time that the poison pointers that include/linux/poison.h
defines based on this illegal pointer are beyond the largest useful
virtual addresses. Also, assert at compile-time that the range of poison
pointers per include/linux/poison.h (currently a range of less than
0x10000 addresses) does not overlap with the range used for address
handles for s390's non-MIO PCI instructions.
This enables s390 to track the DMA mappings by the network stack's
page_pool that was introduced with [0]. Other functional changes are not
intended.
Other archictectures have introduced this for various other reasons with
commit 5c178472af ("riscv: define ILLEGAL_POINTER_VALUE for 64bit")
commit f6853eb561 ("powerpc/64: Define ILLEGAL_POINTER_VALUE for 64-bit")
commit bf0c4e0473 ("arm64: kconfig: Move LIST_POISON to a safe value")
commit a29815a333 ("core, x86: make LIST_POISON less deadly")
[0] https://lore.kernel.org/all/20250409-page-pool-track-dma-v9-0-6a9ef2e0cba8@redhat.com/
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual.
This avoids spurious interrupts during updates.
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig symbol
for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAml1U4IACgkQx4+xDQu9
KkuGrg//VxWHcESotmJYSLBHAnR9jmwq/cubv/yX0WQuGqpAYVW8703F2QspvbxW
iUa2SDMqiLodWvtz9T91exlNjcbbayyiltdmFeu+cj2vr1r5GRCrHDIFMwAhM6Yu
zc0ZO/1Trmom75yNTC8A93X0AE9yYx71VWll7KvdPhng5Tewq1sKIYCZ33GKP7LN
EkDWymE4tATK+Wz7Orb5Rm7krfJirf8jWkUYu7Br+rQ6WelHK/tc///wqGRluHit
7x8ca+86ASAVf9QZ73ODckc7h+rtXS5jGu3bBpXmr/BthpYc1awW/jrIFl7MbeXI
ZHzNndijENnkl0ULsYOvGQOxy+PKtEfP70OQyRvmOqavMMaKLC/rkoBOosXPEpe/
Br9wMIFwUYWAyi8z2Wx0GV+rBTVQx+A83Y/ODq0b5kgXzOhRbQlc1WIQnhOGvXIr
PDbxKQxdz/fQ19eJsR8Sr2JtDlORUxc8UjhkDY6BL30TYCYyhAhZUF9d2A6wZgGy
dqrlG0mODwcKBJINZ+r0gyEW8DFkL7t99Ju1YiUK4eIO4Bequb7Q26KoUGriXwOy
7UPQ5d4svdxNnSwDkT73oUJop9Y34f0cNQmThKNaPTN2hulFzAVCdsLI0rCWAEzQ
Z+XFncMkfAe3vnH9m/Vr/i5ndAHnMk5H09f5lZRn6KhtVedx0AM=
=XHMU
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"The notable changes here are the three RISC-V timer compare register
update sequence patches. These only apply to RV32 systems and are
related to the 64-bit timer compare value being split across two
separate 32-bit registers.
We weren't using the appropriate three-write sequence, documented in
the RISC-V ISA specifications, to avoid spurious timer interrupts
during the update sequence; so, these patches now use the recommended
sequence.
This doesn't affect 64-bit RISC-V systems, since the timer compare
value fits inside a single register and can be updated with a single
write.
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual
This avoids spurious interrupts during updates
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig
symbol for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference"
* tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add intermediate cast to 'unsigned long' in __get_user_asm
riscv: Use 64-bit variable for output in __get_user_asm
soc: renesas: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: ERRATA_STARFIVE_JH7100: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: suspend: Fix stimecmp update hazard on RV32
riscv: kvm: Fix vstimecmp update hazard on RV32
riscv: clocksource: Fix stimecmp update hazard on RV32
Documentation: riscv: uabi: Clarify ISA spec version for canonical order
Fixes and New HW Support
- acer-wmi:
- Extend support for Acer Nitro AN515-58
- Fix missing capability check
- amd/wbrf: Fix memory leak in wbrf_record()
- asus-armoury:
- Fix GA403U* matching
- Fix FA608UM TDP data
- Add many models
- asus-wmi: Move OOBE presence check outside deprecation ifdef
- docs:
- alienware-wmi: Typo fix
- amd_hsmp: Fix document link
- hp-bioscfg:
- Fix kernel panic in GET_INSTANCE_ID macro
- Fix kobject warnings for empty attribute names
- Correct GUID to uppercase (lowercase letter prevented autoloading
the module)
- mellanox: Fix SN5640/SN5610 LED platform data
The following is an automated shortlog grouped by driver:
acer-wmi:
- Extend support for Acer Nitro AN515-58
- Fix missing capability check
amd:
- Fix memory leak in wbrf_record()
asus-armoury:
- Add power limits for Asus G513QY
- add support for FA401UV
- add support for FA617XT
- add support for G835L
- add support for GA403UV
- add support for GA403WM
- add support for GA403WW
- add support for GV302XV
- fix ppt data for FA608UM
- fix ppt data for GA403U* renaming to GA403UI
- keep the list ordered alphabetically
asus-wmi:
- fix sending OOBE at probe
docs: alienware-wmi:
- fix typo
docs:
- fix PPR for AMD EPYC broken link
hp-bioscfg:
- Fix automatic module loading
- Fix kernel panic in GET_INSTANCE_ID macro
- Fix kobject warnings for empty attribute names
mellanox:
- Fix SN5640/SN5610 LED platform data
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaXOZ7AAKCRBZrE9hU+XO
MRyUAP4m5mllFdMRFeuLKq76tZPuXS0qTE/5KJ0YD+ytSoM8FAEAhpQkZ/hF4lV9
5i/ANXjkOkeWRblguPuBwJ+8UNOa2AY=
=chCU
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- acer-wmi:
- Extend support for Acer Nitro AN515-58
- Fix missing capability check
- amd/wbrf: Fix memory leak in wbrf_record()
- asus-armoury:
- Fix GA403U* matching
- Fix FA608UM TDP data
- Add many models
- asus-wmi: Move OOBE presence check outside deprecation ifdef
- hp-bioscfg:
- Fix kernel panic in GET_INSTANCE_ID macro
- Fix kobject warnings for empty attribute names
- Correct GUID to uppercase (lowercase letter prevented autoloading
the module)
- mellanox: Fix SN5640/SN5610 LED platform data
- docs:
- alienware-wmi: Typo fix
- amd_hsmp: Fix document link
* tag 'platform-drivers-x86-v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: acer-wmi: Fix missing capability check
platform/x86: acer-wmi: Extend support for Acer Nitro AN515-58
platform/x86: asus-armoury: add support for GA403WW
platform/x86: asus-armoury: keep the list ordered alphabetically
platform/x86: asus-armoury: add support for G835L
platform/x86: asus-armoury: fix ppt data for FA608UM
platform/x86: hp-bioscfg: Fix automatic module loading
platform/x86: hp-bioscfg: Fix kernel panic in GET_INSTANCE_ID macro
platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names
platform/x86: asus-wmi: fix sending OOBE at probe
platform/x86: asus-armoury: add support for FA617XT
platform/x86: asus-armoury: add support for FA401UV
platform/x86: asus-armoury: add support for GV302XV
platform/x86: asus-armoury: Add power limits for Asus G513QY
platform/x86/amd: Fix memory leak in wbrf_record()
platform/mellanox: Fix SN5640/SN5610 LED platform data
docs: fix PPR for AMD EPYC broken link
docs: alienware-wmi: fix typo
platform/x86: asus-armoury: add support for GA403UV
asus-armoury: fix ppt data for GA403U* renaming to GA403UI
...
The root document usually has a special :ref:`genindex` link to the
generated index. This is also the case for Documentation/index.rst. The
other index.rst files deeper in the directory hierarchy usually don't.
For SPHINXDIRS builds, the root document isn't Documentation/index.rst,
but some other index.rst in the hierarchy. Currently they have a
".. only::" block to add the index link when doing SPHINXDIRS html
builds.
This is obviously very tedious and repetitive. The link is also added to
all index.rst files in the hierarchy for SPHINXDIRS builds, not just the
root document.
Put the boilerplate in a sphinx-includes/subproject-index.rst file, and
include it at the end of the root document for subproject builds in an
ad-hoc source-read extension defined in conf.py.
For now, keep having the boilerplate in translations, because this
approach currently doesn't cover translated index link headers.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
[jc: did s/doctree/kern_doc_dir/ ]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260123143149.2024303-1-jani.nikula@intel.com>
When software issues a Cache Maintenance Operation (CMO) targeting a
dirty cache line, the CPU and DSU cluster may optimize the operation by
combining the CopyBack Write and CMO into a single combined CopyBack
Write plus CMO transaction presented to the interconnect (MCN).
For these combined transactions, the MCN splits the operation into two
separate transactions, one Write and one CMO, and then propagates the
write and optionally the CMO to the downstream memory system or external
Point of Serialization (PoS).
However, the MCN may return an early CompCMO response to the DSU cluster
before the corresponding Write and CMO transactions have completed at
the external PoS or downstream memory. As a result, stale data may be
observed by external observers that are directly connected to the
external PoS or downstream memory.
This erratum affects any system topology in which the following
conditions apply:
- The Point of Serialization (PoS) is located downstream of the
interconnect.
- A downstream observer accesses memory directly, bypassing the
interconnect.
Conditions:
This erratum occurs only when all of the following conditions are met:
1. Software executes a data cache maintenance operation, specifically,
a clean or clean&invalidate by virtual address (DC CVAC or DC
CIVAC), that hits on unique dirty data in the CPU or DSU cache.
This results in a combined CopyBack and CMO being issued to the
interconnect.
2. The interconnect splits the combined transaction into separate Write
and CMO transactions and returns an early completion response to the
CPU or DSU before the write has completed at the downstream memory
or PoS.
3. A downstream observer accesses the affected memory address after the
early completion response is issued but before the actual memory
write has completed. This allows the observer to read stale data
that has not yet been updated at the PoS or downstream memory.
The implementation of workaround put a second loop of CMOs at the same
virtual address whose operation meet erratum conditions to wait until
cache data be cleaned to PoC. This way of implementation mitigates
performance penalty compared to purely duplicate original CMO.
Signed-off-by: Lucas Wei <lucaswei@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Armv8.7 introduces single-copy atomic 64-byte loads and stores
instructions and its variants named under FEAT_{LS64, LS64_V}.
These features are identified by ID_AA64ISAR1_EL1.LS64 and the
use of such instructions in userspace (EL0) can be trapped.
As st64bv (FEAT_LS64_V) and st64bv0 (FEAT_LS64_ACCDATA) can not be tell
apart, FEAT_LS64 and FEAT_LS64_ACCDATA which will be supported in later
patch will be exported to userspace, FEAT_LS64_V will be enabled only
in kernel.
In order to support the use of corresponding instructions in userspace:
- Make ID_AA64ISAR1_EL1.LS64 visbile to userspace
- Add identifying and enabling in the cpufeature list
- Expose these support of these features to userspace through HWCAP3
and cpuinfo
ld64b/st64b (FEAT_LS64) and st64bv (FEAT_LS64_V) is intended for
special memory (device memory) so requires support by the CPU, system
and target memory location (device that support these instructions).
The HWCAP3_LS64, implies the support of CPU and system (since no
identification method from system, so SoC vendors should advertise
support in the CPU if system also support them).
Otherwise for ld64b/st64b the atomicity may not be guaranteed or a
DABT will be generated, so users (probably userspace driver developer)
should make sure the target memory (device) also have the support.
For st64bv 0xffffffffffffffff will be returned as status result for
unsupported memory so user should check it.
Document the restrictions along with HWCAP3_LS64.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
Specify that chapter 27 refers to version 20191213 of the RISC-V ISA
Unprivileged Architecture. The chapter numbering differs across
specification versions - for example, in version 20250508, the ISA
Extension Naming Conventions is chapter 36, not chapter 27.
Historical versions of the RISC-V specification can be found via Link [1].
Acked-by: Paul Walmsley <pjw@kernel.org>
Link: https://riscv.org/specifications/ratified/ [1]
Fixes: f07b2b3f9d ("Documentation: riscv: add a section about ISA string ordering in /proc/cpuinfo")
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://patch.msgid.link/20260115-adding-b-dtsi-v2-1-254dd61cf947@riscstar.com
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Direct URLs to vendor specifications for Intel VT-d and AMD IOMMU
are frequently changed by vendors, leading to broken links in the
documentation.
Replace the fragile URLs with persistent identifiers, providing the
official document titles and IDs. This ensures users can locate the
relevant specifications regardless of vendor website restructuring.
Signed-off-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260106052815.46114-1-richard.lyu@suse.com
As 'AMD Documentation Hub' [1] announced: "All technical documentation,
including for AMD EPYC™ processors ..., and more is now hosted on the
AMD Technical Information Portal (TIP) [2]".
By searching the No.55898, update the new URL.
[1] https://www.amd.com/en/search/documentation/hub.html
[2] https://docs.amd.com/
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Acked-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20251230133101.14362-1-haiyuewa@163.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
- Add probing and userspace reporting support for the standard RISC-V
ISA extensions Zilsd and Zclsd, which implement load/store dual
instructions on RV32
- Abstract the register saving code in setup_sigcontext() so it can be
used for stateful RISC-V ISA extensions beyond the vector extension
- Add the SBI extension ID and some initial data structure definitions
for the RISC-V standard SBI debug trigger extension
- Clean up some code slightly: change some page table functions to
avoid atomic operations oinn !SMP and to avoid unnecessary casts to
atomic_long_t; and use the existing RISCV_FULL_BARRIER macro in
place of some open-coded "fence rw,rw" instructions
-----BEGIN PGP SIGNATURE-----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=Pgyz
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Nothing exotic here; these are the cleanup and new ISA extension
probing patches (not including CFI):
- Add probing and userspace reporting support for the standard RISC-V
ISA extensions Zilsd and Zclsd, which implement load/store dual
instructions on RV32
- Abstract the register saving code in setup_sigcontext() so it can
be used for stateful RISC-V ISA extensions beyond the vector
extension
- Add the SBI extension ID and some initial data structure
definitions for the RISC-V standard SBI debug trigger extension
- Clean up some code slightly: change some page table functions to
avoid atomic operations oinn !SMP and to avoid unnecessary casts to
atomic_long_t; and use the existing RISCV_FULL_BARRIER macro in
place of some open-coded 'fence rw,rw' instructions"
* tag 'riscv-for-linus-6.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add SBI debug trigger extension and function ids
riscv/atomic.h: use RISCV_FULL_BARRIER in _arch_atomic* function.
riscv: hwprobe: export Zilsd and Zclsd ISA extensions
riscv: add ISA extension parsing for Zilsd and Zclsd
dt-bindings: riscv: add Zilsd and Zclsd extension descriptions
riscv: mm: use xchg() on non-atomic_long_t variables, not atomic_long_xchg()
riscv: mm: ptep_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: mm: pmdp_huge_get_and_clear(): avoid atomic ops when !CONFIG_SMP
riscv: signal: abstract header saving for setup_sigcontext
Update the device tree binding reference from .txt to YAML.
Binding was converted in commit 20b3c9a403 ("dt-bindings: arm: Convert ti,keystone to DT schema")
and moved to Documentation/devicetree/bindings/arm/ti/ti,keystone.yaml.
Signed-off-by: Shubham Sharma <slopixelz@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251207195632.68681-1-slopixelz@gmail.com>
Export Zilsd and Zclsd ISA extensions through hwprobe.
Signed-off-by: Pincheng Wang <pincheng.plct@isrc.iscas.ac.cn>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Link: https://patch.msgid.link/20250826162939.1494021-4-pincheng.plct@isrc.iscas.ac.cn
[pjw@kernel.org: fixed whitespace; updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Sphinx reports htmldocs warnings:
Documentation/arch/x86/boot.rst:437: ERROR: Malformed table.
Text in column margin in table line 2.
The table header defined the first column width as 2 characters ("=="),
which is too narrow for entries like "0x10" and "0x13". This caused the
text to spill into the margin, triggering a docutils parsing failure.
Fix it by extending the first column of assigned boot loader ID to 4
characters ("====") to fit the widest entries.
Fixes: 1c3377bee2 ("x86/boot/Documentation: Prefix hexadecimal literals with 0x")
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://patch.msgid.link/20251210092814.9986-1-swarajgaikwad1925@gmail.com
- Enable parallel hotplug for RISC-V
- Optimize vector regset allocation for ptrace()
- Add a kernel selftest for the vector ptrace interface
- Enable the userspace RAID6 test to build and run using RISC-V
vectors
- Add initial support for the Zalasr RISC-V ratified ISA extension
- For the Zicbop RISC-V ratified ISA extension to userspace, expose
hardware and kernel support to userspace and add a kselftest for
Zicbop
- Convert open-coded instances of 'asm goto's that are controlled by
runtime ALTERNATIVEs to use riscv_has_extension_{un,}likely(),
following arm64's alternative_has_cap_{un,}likely()
- Remove an unnecessary mask in the GFP flags used in some calls to
pagetable_alloc()
-----BEGIN PGP SIGNATURE-----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=J1nv
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.19-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Enable parallel hotplug for RISC-V
- Optimize vector regset allocation for ptrace()
- Add a kernel selftest for the vector ptrace interface
- Enable the userspace RAID6 test to build and run using RISC-V vectors
- Add initial support for the Zalasr RISC-V ratified ISA extension
- For the Zicbop RISC-V ratified ISA extension to userspace, expose
hardware and kernel support to userspace and add a kselftest for
Zicbop
- Convert open-coded instances of 'asm goto's that are controlled by
runtime ALTERNATIVEs to use riscv_has_extension_{un,}likely(),
following arm64's alternative_has_cap_{un,}likely()
- Remove an unnecessary mask in the GFP flags used in some calls to
pagetable_alloc()
* tag 'riscv-for-linus-6.19-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
selftests/riscv: Add Zicbop prefetch test
riscv: hwprobe: Expose Zicbop extension and its block size
riscv: Introduce Zalasr instructions
riscv: hwprobe: Export Zalasr extension
dt-bindings: riscv: Add Zalasr ISA extension description
riscv: Add ISA extension parsing for Zalasr
selftests: riscv: Add test for the Vector ptrace interface
riscv: ptrace: Optimize the allocation of vector regset
raid6: test: Add support for RISC-V
raid6: riscv: Allow code to be compiled in userspace
raid6: riscv: Prevent compiler from breaking inline vector assembly code
riscv: cmpxchg: Use riscv_has_extension_likely
riscv: bitops: Use riscv_has_extension_likely
riscv: hweight: Use riscv_has_extension_likely
riscv: checksum: Use riscv_has_extension_likely
riscv: pgtable: Use riscv_has_extension_unlikely
riscv: Remove __GFP_HIGHMEM masking
RISC-V: Enable HOTPLUG_PARALLEL for secondary CPUs
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules that
are imported by multiple programs. These modules have been pulled
together under tools/lib/python/ -- at least, for documentation-related
programs. There is other Python code in the tree that might eventually
want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer used by
default, and nobody has missed it, least of all anybody who actually had
to look at it.
- The docs build was controlled by a complex mess of makefilese that few
dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will be far
easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an end to
the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmkuHzEACgkQF0NaE2wM
flgiqAf/aFUA3zCMvOSjbOpX8EO/4rs0ISkhhb01rLSMsRs3P+v9SlGVJls734BE
0ZvVmBo0p7mNakZD4tFCryFn8Gntn28smCEmpDu/FRDMOEcXFUqxQ9st9OhRlar2
tETdFIKIF+yncFJ83Mjr7F5Yeqg38m82g5JdTxvh6FmvDhPLiSXDEeBV2L7hU+St
EX8D8KOZH74XM8LMr8eg3GbUXx72A7WELndlF7DfGIAC8rFC3C9wa0CUSx8wz2Zh
CoCOYsrmd7WdB+c30SUmQbtYLVyWraiqVQVUlCdZDeYPBT/mTo6zJI5L0WxgXuHz
6o+fQdfLA7zlMHTelVcM6y4Qwkmayg==
=1TPY
-----END PGP SIGNATURE-----
Merge tag 'docs-6.19' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules
that are imported by multiple programs. These modules have been
pulled together under tools/lib/python/ -- at least, for
documentation-related programs. There is other Python code in the
tree that might eventually want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer
used by default, and nobody has missed it, least of all anybody who
actually had to look at it.
- The docs build was controlled by a complex mess of makefilese that
few dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will
be far easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an
end to the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual"
* tag 'docs-6.19' of git://git.lwn.net/linux: (164 commits)
docs: makefile: move rustdoc check to the build wrapper
README: restructure with role-based documentation and guidelines
docs: kdoc: various fixes for grammar, spelling, punctuation
docs: kdoc_parser: use '@' for Excess enum value
docs: submitting-patches: Clarify that removal of Acks needs explanation too
docs: kdoc_parser: add data/function attributes to ignore
docs: MAINTAINERS: update Mauro's files/paths
docs/zh_CN: Add wd719x.rst translation
docs/zh_CN: Add libsas.rst translation
get_feat.pl: remove it, as it got replaced by get_feat.py
Documentation/sphinx/kernel_feat.py: use class directly
tools/docs/get_feat.py: convert get_feat.pl to Python
Documentation/admin-guide: fix typo and comment in cscope example
docs/zh_CN: Add data-integrity.rst translation
docs/zh_CN: Add blk-mq.rst translation
docs/zh_CN: Add block/index.rst translation
docs/zh_CN: Update the Chinese translation of kbuild.rst
docs: bring some order to our Python module hierarchy
docs: Move the python libraries to tools/lib/python
Documentation/kernel-parameters: Move the kernel build options
...
The x86 bootloader ID specification text uses hexadecimal
values without a 0x prefix:
D kexec-tools
E Extended (see ext_loader_type)
F Special (0xFF = undefined)
10 Reserved
11 Minimal Linux Bootloader
<http://sebastian-plotz.blogspot.de>
12 OVMF UEFI virtualization stack
13 barebox
Which beyond the ambiguity of '13' in isolation, also
made me fail a grep -wi '0xd' when I was looking for
the kexec bootloader ID definition and caused quite
a bit of head-scratching before I found out why it
didn't show up.
Furthermore, the actual explanatory text uses the 0x
prefix:
For boot loader IDs above T = 0xD, write T = 0xE to this field and
write the extended ID minus 0x10 to the ext_loader_type field.
Similarly, the ext_loader_ver field can be used to provide more than
four bits for the bootloader version.
So make it all both unambiguous, easy to grep and consistent
across the entire documentation by prefixing the IDs with 0x.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kernel@vger.kernel.org
The bootloader ID specification text uses 2 capitalization
variants for the same thing: 'id', 'ids', 'ID' and 'IDs'.
Use 'ID/IDs' consistently.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kernel@vger.kernel.org
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support for
NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections
-----BEGIN PGP SIGNATURE-----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=4Sb6
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
* arm64/for-next/perf:
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arch_topology: Provide a stub topology_core_has_smt() for !CONFIG_GENERIC_ARCH_TOPOLOGY
perf/arm-ni: Fix and optimise register offset calculation
perf: arm_pmuv3: Add new Cortex and C1 CPU PMUs
perf: arm_cspmu: fix error handling in arm_cspmu_impl_unregister()
perf/arm-ni: Add NoC S3 support
perf/arm_cspmu: nvidia: Add pmevfiltr2 support
perf/arm_cspmu: nvidia: Add revision id matching
perf/arm_cspmu: Add pmpidr support
perf/arm_cspmu: Add callback to reset filter config
perf: arm_pmuv3: Don't use PMCCNTR_EL0 on SMT cores
* for-next/misc:
: Miscellaneous patches
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
arm64: mm: make linear mapping permission update more robust for patial range
arm64/mm: Elide TLB flush in certain pte protection transitions
arm64/mm: Rename try_pgd_pgtable_alloc_init_mm
arm64/mm: Allow __create_pgd_mapping() to propagate pgtable_alloc() errors
arm64: add unlikely hint to MTE async fault check in el0_svc_common
arm64: acpi: add newline to deferred APEI warning
arm64: entry: Clean out some indirection
arm64/mm: Ensure PGD_SIZE is aligned to 64 bytes when PA_BITS = 52
arm64/mm: Drop cpu_set_[default|idmap]_tcr_t0sz()
arm64: remove unused ARCH_PFN_OFFSET
arm64: use SOFTIRQ_ON_OWN_STACK for enabling softirq stack
arm64: Remove assertion on CONFIG_VMAP_STACK
* for-next/kselftest:
: arm64 kselftest patches
kselftest/arm64: Align zt-test register dumps
* for-next/efi-preempt:
: arm64: Make EFI calls preemptible
arm64/efi: Call EFI runtime services without disabling preemption
arm64/efi: Move uaccess en/disable out of efi_set_pgd()
arm64/efi: Drop efi_rt_lock spinlock from EFI arch wrapper
arm64/fpsimd: Permit kernel mode NEON with IRQs off
arm64/fpsimd: Don't warn when EFI execution context is preemptible
efi/runtime-wrappers: Keep track of the efi_runtime_lock owner
efi: Add missing static initializer for efi_mm::cpus_allowed_lock
* for-next/assembler-macro:
: arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
* for-next/typos:
: Random typo/spelling fixes
arm64: Fix double word in comments
arm64: Fix typos and spelling errors in comments
* for-next/sme-ptrace-disable:
: Support disabling streaming mode via ptrace on SME only systems
kselftest/arm64: Cover disabling streaming mode without SVE in fp-ptrace
kselftst/arm64: Test NT_ARM_SVE FPSIMD format writes on non-SVE systems
arm64/sme: Support disabling streaming mode via ptrace on SME only systems
* for-next/local-tlbi-page-reused:
: arm64, mm: avoid TLBI broadcast if page reused in write fault
arm64, tlbflush: don't TLBI broadcast if page reused in write fault
mm: add spurious fault fixing support for huge pmd
* for-next/mpam: (34 commits)
: Basic Arm MPAM driver (more to follow)
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
arm_mpam: Use long MBWU counters if supported
arm_mpam: Probe for long/lwd mbwu counters
arm_mpam: Consider overflow in bandwidth counter state
arm_mpam: Track bandwidth counter state for power management
arm_mpam: Add mpam_msmon_read() to read monitor value
arm_mpam: Add helpers to allocate monitors
arm_mpam: Probe and reset the rest of the features
arm_mpam: Allow configuration to be applied and restored during cpu online
arm_mpam: Use a static key to indicate when mpam is enabled
arm_mpam: Register and enable IRQs
arm_mpam: Extend reset logic to allow devices to be reset any time
arm_mpam: Add a helper to touch an MSC from any CPU
arm_mpam: Reset MSC controls from cpuhp callbacks
arm_mpam: Merge supported features during mpam_enable() into mpam_class
arm_mpam: Probe the hardware features resctrl supports
arm_mpam: Add helpers for managing the locking around the mon_sel registers
...
* for-next/acpi:
: arm64 acpi updates
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
* for-next/documentation:
: arm64 Documentation updates
Documentation/arm64: Fix the typo of register names
- Add `RISCV_HWPROBE_EXT_ZICBOP` to report the presence of the
Zicbop extension.
- Add `RISCV_HWPROBE_KEY_ZICBOP_BLOCK_SIZE` to expose the block
size (in bytes) when Zicbop is supported.
- Update hwprobe.rst to document the new extension bit and block
size key, following the existing Zicbom/Zicboz style.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Yao Zihong <zihong.plct@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251118162436.15485-2-zihong.plct@isrc.iscas.ac.cn
[pjw@kernel.org: updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Currently it is not possible to disable streaming mode via ptrace on SME
only systems, the interface for doing this is to write via NT_ARM_SVE but
such writes will be rejected on a system without SVE support. Enable this
functionality by allowing userspace to write SVE_PT_REGS_FPSIMD format data
via NT_ARM_SVE with the vector length set to 0 on SME only systems. Such
writes currently error since we require that a vector length is specified
which should minimise the risk that existing software is relying on current
behaviour.
Reads are not supported since I am not aware of any use case for this and
there is some risk that an existing userspace application may be confused if
it reads NT_ARM_SVE on a system without SVE. Existing kernels will return
FPSIMD formatted register state from NT_ARM_SVE if full SVE state is not
stored, for example if the task has not used SVE. Returning a vector length
of 0 would create a risk that software would try to do things like allocate
space for register state with zero sizes, while returning a vector length of
128 bits would look like SVE is supported. It seems safer to just not make
the changes to add read support.
It remains possible for userspace to detect a SME only system via the ptrace
interface only since reads of NT_ARM_SSVE and NT_ARM_ZA will succeed while
reads of NT_ARM_SVE will fail. Read/write access to the FPSIMD registers in
non-streaming mode is available via REGSET_FPR.
sve_set_common() already avoids allocating SVE storage when doing a FPSIMD
formatted write and allocating SME storage when doing a NT_ARM_SVE write so
we change the function to validate the new case and skip setting a vector
length for it.
The aim is to make a minimally invasive change, no operation that would
previously have succeeded will be affected, and we use a previously
defined interface in new circumstances rather than define completely new
ABI.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: David Spickett <david.spickett@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
With commit 1204777867 ("s390/debug: keep debug data on resize")
the behavior of a debug area resize operation was changed. Update the
associated documentation to reflect this change.
Fixes: 1204777867 ("s390/debug: keep debug data on resize")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Since the Handover Protocol was deprecated, the recommended approach is
to provide an initrd using a UEFI boot service with the
LINUX_EFI_INITRD_MEDIA_GUID device path. Documentation for the new
approach has been no more than an admonition with a link to an existing
implementation.
Provide a short explanation of this functionality, to ease future
implementations without having to reverse engineer existing ones.
[Bagas: Don't use :ref: link to EFI stub documentation and refer to
OVMF/edk2 implementation]
Signed-off-by: Hugo Osvaldo Barrera <hugo@whynothugo.nl>
Link: https://lore.kernel.org/r/20250428131206.8656-2-hugo@whynothugo.nl
Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20251013085718.27085-1-bagasdotme@gmail.com>
- Skip TDX bug workaround when the bug is not present
- Update maintainers entries
-----BEGIN PGP SIGNATURE-----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=oJ6l
-----END PGP SIGNATURE-----
Merge tag 'x86_tdx_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The biggest change here is making TDX and kexec play nicely together.
Before this, the memory encryption hardware (which doesn't respect
cache coherency) could write back old cachelines on top of data in the
new kernel, so kexec and TDX were made mutually exclusive. This
removes the limitation.
There is also some work to tighten up a hardware bug workaround and
some MAINTAINERS updates.
- Make TDX and kexec work together
- Skip TDX bug workaround when the bug is not present
- Update maintainers entries"
* tag 'x86_tdx_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/virt/tdx: Use precalculated TDVPR page physical address
KVM/TDX: Explicitly do WBINVD when no more TDX SEAMCALLs
x86/virt/tdx: Update the kexec section in the TDX documentation
x86/virt/tdx: Remove the !KEXEC_CORE dependency
x86/kexec: Disable kexec/kdump on platforms with TDX partial write erratum
x86/virt/tdx: Mark memory cache state incoherent when making SEAMCALL
x86/sme: Use percpu boolean to control WBINVD during kexec
x86/kexec: Consolidate relocate_kernel() function parameters
x86/tdx: Skip clearing reclaimed pages unless X86_BUG_TDX_PW_MCE is present
x86/tdx: Tidy reset_pamt functions
x86/tdx: Eliminate duplicate code in tdx_clear_page()
MAINTAINERS: Add KVM mail list to the TDX entry
MAINTAINERS: Add Rick Edgecombe as a TDX reviewer
MAINTAINERS: Update the file list in the TDX entry.
- Bring the kernel memory-model docs into the Sphinx build in the "literal
include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate HTML
redirects; this can be used on kernel.org (or any other site hosting the
rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink protocol.
- A significant update of the maintainer's PGP guide.
...and a seemingly endless series of typo fixes, build-problem fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmjbwOoACgkQF0NaE2wM
flis1gf/ZvRi3Mo5hIsuGyQfs5kw/jx0N7SG4QYf2rEnt5ZGNa5SkyOVKsWQKTgK
LesQkdaCA0xHMoUWSvZRwn2a0+acpeMm6viXjewd2mU52sSNmSkKG4WsZyxfnOYS
36fkZ1qymQkJ4uSvx5NScTiIBqZx+Qfgkj0eNnXcpJd2vYeAVSu4szsFxeUvcJFj
Ckq3+3DQ5p/dcWwgvdlLKEJGj98Q3cqLrMn8ycbNtwzo3mdVbrlP5+qqNslZC6xY
Nqpv9HXbFWNCaL6YWCybcNOZ4F5UVno1ap2F3imTD8Rp1iG77zAQV5lMlq4Gksf4
kECLc1TtTKSgmgWHmi1sgudqM4Xqpw==
=Qe3Z
-----END PGP SIGNATURE-----
Merge tag 'docs-6.18' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=sMTE
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Make UMIP instruction detection more robust
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
* tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT aliases)
x86/umip: Check that the instruction opcode is at least two bytes
Documentation/x86/topology: Detail CPUID leaves used for topology enumeration
x86/cpu/topology: Define AMD64_CPUID_EXT_FEAT MSR
x86/cpu/topology: Check for X86_FEATURE_XTOPOLOGY instead of passing has_xtopology
x86/cpu/cacheinfo: Simplify cacheinfo_amd_init_llc_id() using _cpuid4_info
x86/cpu: Rename and move CPU model entry for Diamond Rapids
x86/cpu: Detect FreeBSD Bhyve hypervisor
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to: Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira Rajeev, Cédric Le Goater, Christophe Leroy,
Erhard Furtner, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence, Kajol Jain, Kienan Stewart,
Linus Walleij, Mahesh Salgaonkar, Nam Cao, Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas Gleixner, Thomas Huth, Thorsten Blum,
Tyrel Datwyler, Venkat Rao Bagalkote,
-----BEGIN PGP SIGNATURE-----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=U2s/
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- powerpc support for BPF arena and arena atomics
- Patches to switch to msi parent domain (per-device MSI domains)
- Add a lock contention tracepoint in the queued spinlock slowpath
- Fixes for underflow in pseries/powernv msi and pci paths
- Switch from legacy-of-mm-gpiochip dependency to platform driver
- Fixes for handling TLB misses
- Introduce support for powerpc papr-hvpipe
- Add vpa-dtl PMU driver for pseries platform
- Misc fixes and cleanups
Thanks to Aboorva Devarajan, Aditya Bodkhe, Andrew Donnellan, Athira
Rajeev, Cédric Le Goater, Christophe Leroy, Erhard Furtner, Gautam
Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Joe Lawrence,
Kajol Jain, Kienan Stewart, Linus Walleij, Mahesh Salgaonkar, Nam Cao,
Nicolas Schier, Nysal Jan K.A., Ritesh Harjani (IBM), Ruben Wauters,
Saket Kumar Bhaskar, Shashank MS, Shrikanth Hegde, Tejas Manhas, Thomas
Gleixner, Thomas Huth, Thorsten Blum, Tyrel Datwyler, and Venkat Rao
Bagalkote.
* tag 'powerpc-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (49 commits)
powerpc/pseries: Define __u{8,32} types in papr_hvpipe_hdr struct
genirq/msi: Remove msi_post_free()
powerpc/perf/vpa-dtl: Add documentation for VPA dispatch trace log PMU
powerpc/perf/vpa-dtl: Handle the writing of perf record when aux wake up is needed
powerpc/perf/vpa-dtl: Add support to capture DTL data in aux buffer
powerpc/perf/vpa-dtl: Add support to setup and free aux buffer for capturing DTL data
docs: ABI: sysfs-bus-event_source-devices-vpa-dtl: Document sysfs event format entries for vpa_dtl pmu
powerpc/vpa_dtl: Add interface to expose vpa dtl counters via perf
powerpc/time: Expose boot_tb via accessor
powerpc/32: Remove PAGE_KERNEL_TEXT to fix startup failure
powerpc/fprobe: fix updated fprobe for function-graph tracer
powerpc/ftrace: support CONFIG_FUNCTION_GRAPH_RETVAL
powerpc64/modules: replace stub allocation sentinel with an explicit counter
powerpc64/modules: correctly iterate over stubs in setup_ftrace_ool_stubs
powerpc/ftrace: ensure ftrace record ops are always set for NOPs
powerpc/603: Really copy kernel PGD entries into all PGDIRs
powerpc/8xx: Remove left-over instruction and comments in DataStoreTLBMiss handler
powerpc/pseries: HVPIPE changes to support migration
powerpc/pseries: Enable hvpipe with ibm,set-system-parameter RTAS
powerpc/pseries: Enable HVPIPE event message interrupt
...
First set of RISC-V updates for the v6.18 merge window, including:
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather than
open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if they
are available
- The ability to identity and communicate to userspace the presence of a
MIPS P8700-specific ISA extension, and to leverage its MIPS-specific PAUSE
implementation in cpu_relax()
- Several other miscellaneous cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAmjaMVIACgkQx4+xDQu9
Kkva4g/9GE4gzwM+KHlc4e1sfsaTo4oXe9eV+Hj3gUJdM+g8dCtNFchPRCKFjHYb
X9lm2YVL9Q3cZ7yWWy/DJtZ66Yz9foQ4laX7uYbjsdbdjbsAXLXhjNp6uk4nBrqb
uW7Uq+Qel8qq66J/B4Z/U0UzF3e5MaptQ6sLuNRONY9OJUxG76zTSJVKwiVNsGaX
8W59b7ALFlCIwCVyXGm/KO1EELjl8FKDENWXFE1v6T8XvfXfYuhcvUMp84ebbzHV
D4kQrO3nxKQVgKEdCtW8xxt0/aWkYQ8zbQg8bD0gDDzMYb5uiJDcMFaa8ZuEYiLg
EcAJX8LmE5GGlTcJf8/jxvaA87hisNsGFvNPXX1OuI26w2TUNC2u80wE6Q6a3aNu
74oUtZEaPhdFuB31A0rALC8Zb2zalnwwjAL7xRlyAozUuye8Ej7mE7w97WTjIfWz
7ZL19/+C1uawljzYLn+FJBIcl1wTyvOgx6T4TJlmOsa4OFnCreFx+a0Az6+Rx1GC
XGsRyDkGPSabIbNVGxUCyTr4w+VpW1WlDjrjwyLC0DQTFW8wyP44W9/K2scp+CqJ
bSCcAz8QtGAeZ5UlSmXYTOV69xXqZPaom7fVk5RFHoy24en5DSo7kj1NJ3ChupRD
8ACpALcIgw/VEo0Tyqqy3dyVhPDuYaZMY3WgGGj9Cz18U37e/Ho=
=nK3D
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather
than open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if
they are available
- The ability to identity and communicate to userspace the presence
of a MIPS P8700-specific ISA extension, and to leverage its
MIPS-specific PAUSE implementation in cpu_relax()
- Several other miscellaneous cleanups
* tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (39 commits)
riscv: errata: Fix the PAUSE Opcode for MIPS P8700
riscv: hwprobe: Document MIPS xmipsexectl vendor extension
riscv: hwprobe: Add MIPS vendor extension probing
riscv: Add xmipsexectl instructions
riscv: Add xmipsexectl as a vendor extension
dt-bindings: riscv: Add xmipsexectl ISA extension description
riscv: cpufeature: add validation for zfa, zfh and zfhmin
perf: riscv: skip empty batches in counter start
selftests: riscv: Add README for RISC-V KSelfTest
riscv: sbi: Switch to new sys-off handler API
riscv: Move vendor errata definitions to new header
RISC-V: ACPI: enable parsing the BGRT table
riscv: Enable ARCH_HAVE_NMI_SAFE_CMPXCHG
riscv: pi: use 'targets' instead of extra-y in Makefile
riscv: introduce asm/swab.h
riscv: mmap(): use unsigned offset type in riscv_sys_mmap
drivers/perf: riscv: Remove redundant ternary operators
riscv: mm: Use mmu-type from FDT to limit SATP mode
riscv: mm: Return intended SATP mode for noXlvl options
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
...
* for-next/perf: (29 commits)
perf/dwc_pcie: Fix use of uninitialized variable
Documentation: hisi-pmu: Add introduction to HiSilicon V3 PMU
Documentation: hisi-pmu: Fix of minor format error
drivers/perf: hisi: Add support for L3C PMU v3
drivers/perf: hisi: Refactor the event configuration of L3C PMU
drivers/perf: hisi: Extend the field of tt_core
drivers/perf: hisi: Extract the event filter check of L3C PMU
drivers/perf: hisi: Simplify the probe process of each L3C PMU version
drivers/perf: hisi: Export hisi_uncore_pmu_isr()
drivers/perf: hisi: Relax the event ID check in the framework
perf: Fujitsu: Add the Uncore PMU driver
perf/arm-cmn: Fix CMN S3 DTM offset
perf: arm_spe: Prevent overflow in PERF_IDX2OFF()
coresight: trbe: Prevent overflow in PERF_IDX2OFF()
MAINTAINERS: Remove myself from HiSilicon PMU maintainers
drivers/perf: hisi: Add support for HiSilicon MN PMU driver
drivers/perf: hisi: Add support for HiSilicon NoC PMU
perf: arm_pmuv3: Factor out PMCCNTR_EL0 use conditions
arm64/boot: Enable EL2 requirements for SPE_FEAT_FDS
arm64/boot: Factor out a macro to check SPE version
...
