netdev CI reserves SKIP in selftests for cases which can't be executed
due to setup issues, like missing or old commands. Tests which are
expected to fail must use XFAIL.
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251123021601.158709-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit ensures that the required log level is set at the start of
the test iteration.
Part of the cleanup performed at the end of each test iteration resets
the log level (do_cleanup in lib_netcons.sh) to the values defined at the
time test script started. This may cause further test iterations to fail
if the default values are not sufficient.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251121-netcons-basic-loglevel-v1-1-577f8586159c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Increase the receiver timeout. When running between machines
in different geographic regions the test needs more than
a second to SSH across and send the frames.
The bkg() command that runs the receiver defaults to 5 sec timeout,
so using 4 sec sounds like a reasonable value for the receiver itself.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the simple modulo math with the real indirection table
read from the device. This makes the tests pass for mlx5 and
bnxt NICs.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we have YNL support for RSS accessing the RSS info from
C is very easy. Instead of passing the RSS key from Python do it
directly in the C code.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure that the NIC under test is configured for pure Toeplitz
hashing, and no input key transform (no symmetric hashing).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like the liburing is not updated by distros very aggressively.
Presumably because a lot of packages depend on it. I just updated
to Fedora 43 and it's still on liburing 2.9. The test is 9mo old,
at this stage I think this warrants handling the build failure
more gracefully.
Detect if iouring is recent enough and if not print a warning
and exclude the C prog from build. The Python test will just
fail since the binary won't exist. But it removes the major
annoyance of having to update liburing from sources when
developing other tests.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251121040259.3647749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test querying default values and resetting to default values for
netdevsim devlink params.
This should cover the basic paths of interest: driverinit and
non-driverinit cmodes, as well as bool and non-bool value
type. Default param values of type bool are encoded with u8 netlink
type as opposed to flag type, so that userspace can distinguish
"not-present" from false.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20251119025038.651131-7-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Increase MAX_USERDATA_ITEMS from 16 to 256 entries now that the userdata
buffer is allocated dynamically.
The previous limit of 16 was necessary because the buffer was statically
allocated for all targets. With dynamic allocation, we can support more
entries without wasting memory on targets that don't use userdata.
This allows users to attach more metadata to their netconsole messages,
which is useful for complex debugging and logging scenarios.
Also update the testcase accordingly.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251119-netconsole_dynamic_extradata-v3-4-497ac3191707@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a sample tool demonstrating how to add, dump, and delete a
flower filter with two VLAN push actions. The example can be
invoked as:
# samples/tc-filter-add p2
flower pref 1 proto: 0x8100
flower:
vlan_id: 100
vlan_prio: 5
num_of_vlans: 3
action order: 1 vlan push id 200 protocol 0x8100 priority 0
action order: 2 vlan push id 300 protocol 0x8100 priority 0
This verifies correct handling of tc action attributes for multiple
VLAN push actions. The tc action indexed arrays start from index 1,
and the index defines the action order. This behavior differs from
the YNL specification, which expects arrays to be zero-based. To
accommodate this, the example adds a dummy action at index 0, which
is ignored by the kernel.
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Link: https://patch.msgid.link/20251119203618.263780-2-zahari.doychev@linux.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gro.sh and toeplitz.sh used to source in one of two setup scripts
depending on whether the test was expected to be run against
veth or a real device. veth testing is replaced by netdevsim
and existing "remote endpoint" support in our Python tests.
Add a script which sets up loopback mode.
The usage is a little bit more complicated than running
the scripts used to be. Testing used to work like this:
./../gro.sh -i eth0 ...
now the "setup script" has to be run explicitly:
NETIF=eth0 ./../ksft_setup_loopback.sh ./../gro.sh
But the functionality itself is retained.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-13-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rewrite the existing toeplitz.sh test in Python. The conversion
is a lot less exact than the GRO one. We use Netlink APIs to
get the device RSS and IRQ information. We expect that the device
has neither RPS nor RFS configured, and set RPS up as part of
the test.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rewrite the existing gro.sh test in Python. The conversion
not exact, the changes are related to integrating the test
with our "remote endpoint" paradigm. The test now reads
the IP addresses from the user config. It resolves the MAC
address (including running over Layer 3 networks).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're already saving the info about the local dev in env.dev
for the tests, save remote dev as well. This is more symmetric,
env generally provides the same info for local and remote end.
While at it make sure that we reliably get the detailed info
about the local dev. nsim used to read the dev info without -d.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a common synchronization problem when a script (Python test)
uses a C program to set up some state (usually start a receiving
process for traffic). The script needs to know when the process
has fully initialized. The inverse of the problem exists for shutting
the process down - we need a reliable way to tell the process to exit.
We added helpers to do this safely in
commit 7147713799 ("selftests: drv-net: add a way to wait for a local process")
unfortunately the two operations (wait for init, and shutdown) are
controlled by a single parameter (ksft_wait). Add support for using
ksft_ready without using the second fd for exit.
This is useful for programs which wait for a specific number of packets
to rx so exit_wait is a good match, but we still need to wait for init.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251120021024.2944527-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GRO test can run on a real device or a veth.
The Toeplitz hash test can only run on a real device.
Move them from net/ to drivers/net/ and drivers/net/hw/ respectively.
There are two scripts which set up the environment for these tests
setup_loopback.sh and setup_veth.sh. Move those scripts to net/lib.
The paths to the setup files are a little ugly but they will be
deleted shortly.
toeplitz_client.sh is not a test in itself, but rather a helper
to send traffic, so add it to TEST_FILES rather than TEST_PROGS.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use just-added ksft variants for XDP qstat tests.
While at it correct the number of packets, we're sending
1000 packets now.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There's a lot of cases where we try to re-run the same code with
different parameters. We currently need to either use a generator
method or create a "main" case implementation which then gets called
by trivial case functions:
def _test(x, y, z):
...
def case_int():
_test(1, 2, 3)
def case_str():
_test('a', 'b', 'c')
Add support for variants, similar to kselftests_harness.h and
a lot of other frameworks. Variants can be added as decorator
to test functions:
@ksft_variants([(1, 2, 3), ('a', 'b', 'c')])
def case(x, y, z):
...
ksft_run() will auto-generate case names:
case.1_2_3
case.a_b_c
Because the names may not always be pretty (and to avoid forcing
classes to implement case-friendly __str__()) add a wrapper class
KsftNamedVariant which lets the user specify the name for the variant.
Note that ksft_run's args are still supported. ksft_run splices args
and variant params together.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251120021024.2944527-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for adding test variants move the test case
collection logic to a dedicated function. New helper returns
(function, args, name, )
tuples. The main test loop can simply run them, not much
logic or discernment needed.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20251120021024.2944527-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're about to add more features here and finding new issues with old
ones in place is hard. Address ruff checks:
- bare exceptions
- f-string with no params
- unused import
We need to use BaseException when handling defer(), as Petr points out.
This retains the old behavior of ignoring SIGTERM while running cleanups.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251120021024.2944527-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc7).
No conflicts, adjacent changes:
tools/testing/selftests/net/af_unix/Makefile
e1bb28bf13 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
45a1cd8346 ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=89Xl
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPsec and wireless.
Previous releases - regressions:
- prevent NULL deref in generic_hwtstamp_ioctl_lower(),
newer APIs don't populate all the pointers in the request
- phylink: add missing supported link modes for the fixed-link
- mptcp: fix false positive warning in mptcp_pm_nl_rm_addr
Previous releases - always broken:
- openvswitch: remove never-working support for setting NSH fields
- xfrm: number of fixes for error paths of xfrm_state creation/
modification/deletion
- xfrm: fixes for offload
- fix the determination of the protocol of the inner packet
- don't push locally generated packets directly to L2 tunnel
mode offloading, they still need processing from the standard
xfrm path
- mptcp: fix a couple of corner cases in fallback and fastclose
handling
- wifi: rtw89: hw_scan: prevent connections from getting stuck,
work around apparent bug in FW by tweaking messages we send
- af_unix: fix duplicate data if PEEK w/ peek_offset needs to wait
- veth: more robust handing of race to avoid txq getting stuck
- eth: ps3_gelic_net: handle skb allocation failures"
* tag 'net-6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
vsock: Ignore signal/timeout on connect() if already established
be2net: pass wrb_params in case of OS2BMC
l2tp: reset skb control buffer on xmit
net: dsa: microchip: lan937x: Fix RGMII delay tuning
selftests: mptcp: add a check for 'add_addr_accepted'
mptcp: fix address removal logic in mptcp_pm_nl_rm_addr
selftests: mptcp: join: userspace: longer timeout
selftests: mptcp: join: endpoints: longer timeout
selftests: mptcp: join: fastclose: remove flaky marks
mptcp: fix duplicate reset on fastclose
mptcp: decouple mptcp fastclose from tcp close
mptcp: do not fallback when OoO is present
mptcp: fix premature close in case of fallback
mptcp: avoid unneeded subflow-level drops
mptcp: fix ack generation for fallback msk
wifi: rtw89: hw_scan: Don't let the operating channel be last
net: phylink: add missing supported link modes for the fixed-link
selftest: af_unix: Add test for SO_PEEK_OFF.
af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().
net/mlx5: Clean up only new IRQ glue on request_irq() failure
...
Enhance the --list-attrs option to recursively display nested attributes
instead of just showing "nest" as the type.
Nested attributes now show their attribute set name and expand to
display their contents.
# ./cli.py --family ethtool --list-attrs rss-get
[..]
Do request attributes:
- header: nest -> header
- dev-index: u32
- dev-name: string
- flags: u32 (enum: header-flags)
- phy-index: u32
- context: u32
[..]
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251118143208.2380814-3-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a --list-attrs option to the YNL CLI that displays information about
netlink operations, including request and reply attributes.
This eliminates the need to manually inspect YAML spec files to
determine the JSON structure required for operations, or understand the
structure of the reply.
Example usage:
# ./cli.py --family netdev --list-attrs dev-get
Operation: dev-get
Get / dump information about a netdev.
Do request attributes:
- ifindex: u32
netdev ifindex
Do reply attributes:
- ifindex: u32
netdev ifindex
- xdp-features: u64 (enum: xdp-act)
Bitmask of enabled xdp-features.
- xdp-zc-max-segs: u32
max fragment count supported by ZC driver
- xdp-rx-metadata-features: u64 (enum: xdp-rx-metadata)
Bitmask of supported XDP receive metadata features. See Documentation/networking/xdp-rx-metadata.rst for more details.
- xsk-features: u64 (enum: xsk-flags)
Bitmask of enabled AF_XDP features.
Dump reply attributes:
- ifindex: u32
netdev ifindex
- xdp-features: u64 (enum: xdp-act)
Bitmask of enabled xdp-features.
- xdp-zc-max-segs: u32
max fragment count supported by ZC driver
- xdp-rx-metadata-features: u64 (enum: xdp-rx-metadata)
Bitmask of supported XDP receive metadata features. See Documentation/networking/xdp-rx-metadata.rst for more details.
- xsk-features: u64 (enum: xsk-flags)
Bitmask of enabled AF_XDP features.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251118143208.2380814-2-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The previous patch fixed an issue with the 'add_addr_accepted' counter.
This was not spot by the test suite.
Check this counter and 'add_addr_signal' in MPTCP Join 'delete re-add
signal' test. This should help spotting similar regressions later on.
These counters are crucial for ensuring the MPTCP path manager correctly
handles the subflow creation via 'ADD_ADDR'.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-11-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all userspace tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 290493078b ("selftests: mptcp: join: userspace: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-9-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some endpoints
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all endpoints tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 6457595db9 ("selftests: mptcp: join: endpoints: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-8-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After recent fixes like the parent commit, and "selftests: mptcp:
connect: trunc: read all recv data", the two fastclose subtests no
longer look flaky any more.
It then feels fine to remove these flaky marks, to no longer ignore
these subtests in case of errors.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-7-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new test checks that a route that has been promoted from RA-learned
to static does not switch back when a new RA message arrives. In
addition, it checks that the route is owned by RA again when the static
address is removed.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20251115095939.6967-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test covers various cases to verify SO_PEEK_OFF behaviour
for all AF_UNIX socket types.
two_chunks_blocking and two_chunks_overlap_blocking reproduce
the issue mentioned in the previous patch.
Without the patch, the two tests fail:
# RUN so_peek_off.stream.two_chunks_blocking ...
# so_peek_off.c:121:two_chunks_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_blocking
not ok 3 so_peek_off.stream.two_chunks_blocking
# RUN so_peek_off.stream.two_chunks_overlap_blocking ...
# so_peek_off.c:159:two_chunks_overlap_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_overlap_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_overlap_blocking
not ok 5 so_peek_off.stream.two_chunks_overlap_blocking
With the patch, all tests pass:
# PASSED: 15 / 15 tests passed.
# Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251117174740.3684604-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing support for parsing MAC addresses when display_hint is 'mac'
in the YNL library. This enables YNL CLI to accept MAC address strings
for attributes like lladdr in rt-neigh operations.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251117024457.3034-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftests to verify and document Linux’s intended behaviour for
UNIX domain sockets (SOCK_STREAM and SOCK_DGRAM) when a peer closes.
The tests verify that:
1. SOCK_STREAM returns EOF when the peer closes normally.
2. SOCK_STREAM returns ECONNRESET if the peer closes with unread data.
3. SOCK_SEQPACKET returns EOF when the peer closes normally.
4. SOCK_SEQPACKET returns ECONNRESET if the peer closes with unread data.
5. SOCK_DGRAM does not return ECONNRESET when the peer closes.
This follows up on review feedback suggesting a selftest to clarify
Linux’s semantics.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Link: https://patch.msgid.link/20251113112802.44657-1-adelodunolaoluwa@yahoo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ret_set_ksft_status() calls ksft_status_merge() with the current return
status and the last one. It treats a non-zero return code from
ksft_status_merge() as an indication that the return status was
overwritten by the last one and therefore overwrites the return message
with the last one.
Currently, ksft_status_merge() returns a non-zero return code even if
the current return status and the last one are equal. This results in
return messages being overwritten which is counter-productive since we
are more interested in the first failure message and not the last one.
Fix by changing ksft_status_merge() to only return a non-zero return
code if the current return status was actually changed.
Add a test case which checks that the first error message is not
overwritten.
Before:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [FAIL]
retmsg=tfail expected tfail2
[...]
# echo $?
1
After:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [ OK ]
[...]
# echo $?
0
Fixes: 596c8819cb ("selftests: forwarding: Have RET track kselftest framework constants")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251116081029.69112-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, some debugging happened around a test that was timing out. The
stats were showing connections being closed which was confusing because
the closing state was caused by the timeout stopping the transfer.
To avoid such confusion, the timeout is no longer done per mptcp_connect
process, but separately. In case of timeout, the stats are now printed,
then the apps are killed.
The stats will still be printed after the kill, but that's fine, and
this might even be useful, just in case. Timeout should be exceptional.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-8-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After having started mptcp_connect in listening mode,
'mptcp_lib_wait_local_port_listen' can be used to wait for the listening
socket to be ready.
This is better than using the 'sleep' command, not to pause for a fixed
amount of time, but waiting for an event. This helper is used in all
other MPTCP selftests, but not in these two.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-7-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the same netns is used for the listener and the connector, no need
to take exactly the same packet trace twice, one is enough.
This avoids confusions when the traces are the same, and wasting
resources which might not help reproducing an issue.
While at it, avoid long lines and double spaces now that these lines are
no longer aligned.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-6-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before, 'nstat' was used to retrieve each individual counter: this means
querying 4 different sources from /proc/net and iterating over 100+
counters each time. Instead, the stats could be retrieved once, and the
output file could be parsed for each counter. Even better, such file is
already present: the nstat history file.
To be able to get this working, the nstat history file also needs to
contains zero counters too, so it is still possible to know if a counter
is missing or set to 0.
This also simplifies mptcp_connect.sh: instead of checking multiple
counters before and after a test to compute the difference, the stats
history files can be reset before each test, and nstat can display only
the difference.
mptcp_lib_get_counter() continues to work when no history file is
available: by fetching nstat directly, like before. This is the case in
diag.sh and userspace_pm.sh where there is no need to save the history
file. This is also the case in mptcp_join.sh, when 'run_tests' is
executed in the background: easier to continue fetching counters than
updating the history each time it is needed.
Note: 'nstat' is called with '-s' in mptcp_lib_nstat_get(), so this
helper can be called multiple times during the test if needed.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-5-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of errors, dump the stats from history instead of using nstat.
There are multiple advantages to that:
- The same filters from pr_err_stats are used, e.g. the unused 'rate'
column is not displayed.
- The counters are closer to the ones from when the test stopped.
- While at it, the errors can be better presented: error colours, a
small indentation to distinguish the different parts, extra new lines.
Even if it should only happen in rare cases -- internal errors, or netns
issues -- if no history is available, 'nstat' is used like before, just
in case.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-4-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the MPTCP selftests, the nstat daemon is not used. It means that
the last column (the rate) is always 0.0, and that's not something
interesting to display.
Then, this last column can be filtered out.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-3-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that these files are written from MPTCP lib helpers, the stats file
paths are uniformed. Then, no need to specify them from the each
selftest.
No behavioural changes intended.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-2-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These new helpers are easier to read than the long and multi lines
commands. Plus it will ease the addition of new features related to that
in the next commits.
No behavioural changes intended.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251114-net-next-mptcp-sft-count-cache-stats-timeout-v1-1-863cb04e1b7b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The libmnl dependency has been removed from libynl back in
commit 73395b4381 ("tools: ynl: remove the libmnl dependency")
Remove it from the ynltool Makefile.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20251115225508.1000072-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix writing bpf_prog (infos|btfs)_cnt to data file, to not generate
invalid perf.data files in some corner cases.
- Fix 'perf top' segfault by ensuring libbfd is initialized. This is an
opt-in feature due to license incompatibilities.
- Fix segfault in 'perf lock' due to missing kernel map.
- Fix 'perf lock contention' test.
- Don't fail fast path detection if binutils-devel isn't available.
- Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCaRokLwAKCRCyPKLppCJ+
JwEYAQDuSXq1QraQr4ADvGpLAGVyWCxnXbhNqSmcCVB07OO5AQEA69kNlvoKHm3L
ml2BiY6MMRQAXaTs4vi9hJnEdSnzcg0=
=vvjd
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.18-2-2025-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix writing bpf_prog (infos|btfs)_cnt to data file, to not generate
invalid perf.data files in some corner cases.
- Fix 'perf top' segfault by ensuring libbfd is initialized. This is an
opt-in feature due to license incompatibilities.
- Fix segfault in 'perf lock' due to missing kernel map.
- Fix 'perf lock contention' test.
- Don't fail fast path detection if binutils-devel isn't available.
- Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason.
* tag 'perf-tools-fixes-for-v6.18-2-2025-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf libbfd: Ensure libbfd is initialized prior to use
perf test: Fix lock contention test
perf lock: Fix segfault due to missing kernel map
tools headers UAPI: Sync KVM's vmx.h with the kernel to pick SEAMCALL exit reason
perf build: Don't fail fast path feature detection when binutils-devel is not available
perf header: Write bpf_prog (infos|btfs)_cnt to data file
All are singletons - please see the respective changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaRoauQAKCRDdBJ7gKXxA
jtNFAQDEMH0+zRGz/Larkf9cgmdKcDgij1DP2gP/3i8PWAoaGQD8C9evZxu1h9wC
rFbaSkPDeSdDafo3RZfpo1gqE0LdEA4=
=oew8
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-11-16-10-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. 5 are cc:stable, 4 are against mm/
All are singletons - please see the respective changelogs for details"
* tag 'mm-hotfixes-stable-2025-11-16-10-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm, swap: fix potential UAF issue for VMA readahead
selftests/user_events: fix type cast for write_index packed member in perf_test
lib/test_kho: check if KHO is enabled
mm/huge_memory: fix folio split check for anon folios in swapcache
MAINTAINERS: update David Hildenbrand's email address
crash: fix crashkernel resource shrink
mm: fix MAX_FOLIO_ORDER on powerpc configs with hugetlb
Accessing 'reg.write_index' directly triggers a -Waddress-of-packed-member
warning due to potential unaligned pointer access:
perf_test.c:239:38: warning: taking address of packed member 'write_index'
of class or structure 'user_reg' may result in an unaligned pointer value
[-Waddress-of-packed-member]
239 | ASSERT_NE(-1, write(self->data_fd, ®.write_index,
| ^~~~~~~~~~~~~~~
Since write(2) works with any alignment. Casting '®.write_index'
explicitly to 'void *' to suppress this warning.
Link: https://lkml.kernel.org/r/20251106095532.15185-1-ankitkhushwaha.linux@gmail.com
Fixes: 42187bdc3c ("selftests/user_events: Add perf self-test for empty arguments events")
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: sunliming <sunliming@kylinos.cn>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The XDP qstats tests send 2k packets over a single socket.
Looks like when netdev CI is busy running those tests in QEMU
occasionally flakes. The target doesn't get to run at all
before all 2000 packets are sent.
Lower the number of packets to 1000 and reopen the socket
every 50 packets, to give RSS a chance to spread the packets
to multiple queues.
For the netdev CI testing either lowering the count or using
multiple sockets is enough, but let's do both for extra resiliency.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20251113152703.3819756-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On clang 20.1.8 the XDP program fails to load with a register spill error.
Since hdr_len is a __u32, the compiler decided it only needed the lower
32-bits of ctx->data, which later triggers the register spill verifier
error.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20251113043102.4062150-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
