Add 2 test cases to exercise fix in act_ife's internal metalist
behaviour.
- Update decode ife action into encode with tcindex metadata
- Update decode ife action into encode with multiple metadata
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260304140603.76500-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for a kernel panic that occurs when an IPv4 route
references an IPv6 nexthop object created on the loopback device.
The test creates an IPv6 nexthop on lo, binds an IPv4 route to it, then
triggers a route lookup via ping to verify the kernel does not crash.
./fib_nexthops.sh
Tests passed: 249
Tests failed: 0
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260304113817.294966-3-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tun UDP tunnel GSO fixture contains XFAIL-marked variants intended to
exercise failure paths (e.g. EMSGSIZE / "Message too long").
Using ASSERT_EQ() in these tests aborts the subtest, which prevents the
harness from classifying them as XFAIL and can make the overall net: tun
test fail.
Switch the relevant ASSERT_EQ() checks to EXPECT_EQ() so the subtests
continue running and the failures are correctly reported and accounted
as XFAIL where applicable.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-2-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TEST_F() allocates and registers its struct __test_metadata via mmap()
inside its constructor, and only then assigns the
_##fixture_##test##_object pointer.
XFAIL_ADD() runs in a constructor too and reads
_##fixture_##test##_object to initialize xfail->test. If XFAIL_ADD runs
first, xfail->test can be NULL and the expected failure will be reported
as FAIL.
Use constructor priorities to ensure TEST_F registration runs before
XFAIL_ADD, without adding extra state or runtime lookups.
Fixes: 2709473c93 ("selftests: kselftest_harness: support using xfail")
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://patch.msgid.link/20260225111451.347923-1-sun.jian.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: endpoints with both the signal and
subflow flags should always be marked as used even if it was not
possible to create new subflows due to the MPTCP PM limits.
For this test, an extra endpoint is created with both the signal and the
subflow flags, and limits are set not to create extra subflows. In this
case, an ADD_ADDR is sent, but no subflows are created. Still, the local
endpoint is marked as used, and no warning is fired when removing the
endpoint, after having sent a RM_ADDR.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 85df533a78 ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-5-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This validates the previous commit: RM_ADDR were sent over the first
found active subflow which could be the same as the one being removed.
It is more likely to loose this notification.
For this check, RM_ADDR are explicitly dropped when trying to send them
over the initial subflow, when removing the endpoint attached to it. If
it is dropped, the test will complain because some RM_ADDR have not been
received.
Note that only the RM_ADDR are dropped, to allow the linked subflow to
be quickly and cleanly closed. To only drop those RM_ADDR, a cBPF byte
code is used. If the IPTables commands fail, that's OK, the tests will
continue to pass, but not validate this part. This can be ignored:
another subtest fully depends on such command, and will be marked as
skipped.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 8dd5efb1f9 ("mptcp: send ack for rm_addr")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-3-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, the netem qdisc can keep up to 1000 packets under its belly
to deal with the configured rate and delay. The simult flows test-case
simulates very low speed links, to avoid problems due to slow CPUs and
the TCP stack tend to transmit at a slightly higher rate than the
(virtual) link constraints.
All the above causes a relatively large amount of packets being enqueued
in the netem qdiscs - the longer the transfer, the longer the queue -
producing increasingly high TCP RTT samples and consequently increasingly
larger receive buffer size due to DRS.
When the receive buffer size becomes considerably larger than the needed
size, the tests results can flake, i.e. because minimal inaccuracy in the
pacing rate can lead to a single subflow usage towards the end of the
connection for a considerable amount of data.
Address the issue explicitly setting netem limits suitable for the
configured link speeds and unflake all the affected tests.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-1-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
list_categories() builds a set directly from the 'category'
field of each test case. Since 'category' is a list,
set(map(...)) attempts to insert lists into a set, which
raises:
TypeError: unhashable type: 'list'
Flatten category lists and collect unique category names
using set.update() instead.
Signed-off-by: Naveen Anandhan <mr.navi8680@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a selftest to verify that changing xmit_hash_policy to vlan+srcmac
is rejected when a native XDP program is loaded on a bond in 802.3ad
mode. Without the fix in bond_option_xmit_hash_policy_set(), the change
succeeds silently, creating an inconsistent state that triggers a kernel
WARNING in dev_xdp_uninstall() when the bond is torn down.
The test attaches native XDP to a bond0 (802.3ad, layer2+3), then
attempts to switch xmit_hash_policy to vlan+srcmac and asserts the
operation fails. It also verifies the change succeeds after XDP is
detached, confirming the rejection is specific to the XDP-loaded state.
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-3-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 1cc93c48b5 ("selftests/net: packetdrill: remove tests for
tcp_rcv_*big") removed the test for the reverted commit 1d2fbaad7c
("tcp: stronger sk_rcvbuf checks") but also the one for commit
9ca48d616e ("tcp: do not accept packets beyond window").
Restore the test with the necessary adaptation: expect a delayed ACK
instead of an immediate one, since tcp_can_ingest() does not fail
anymore for the last data packet.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Link: https://patch.msgid.link/20260301-tcp_rcv_big_endseq-v1-1-86ab7415ab58@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 4 test cases to exercise new act_ct binding restrictions:
- Try to attach act_ct to an ets qdisc
- Attach act_ct to an ingress qdisc
- Attach act_ct to a clsact/egress qdisc
- Attach act_ct to a shared block
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260225134349.1287037-2-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub reports test flakes on debug kernels:
FAIL: test_udp_gro_ct: Expected software segmentation to occur, had 23 and 17
This test assumes that the kernels nfnetlink_queue module sees N GSO
packets, segments them into M skbs and queues them to userspace for
reinjection.
Hence, if M >= N, no segmentation occurred.
However, its possible that this happens:
- nfnetlink_queue gets GSO packet
- segments that into n skbs
- userspace buffer is full, kernel drops the segmented skbs
-> "toqueue" counter incremented by 1, "fromqueue" is unchanged.
If this happens often enough in a single run, M >= N check triggers
incorrectly.
To solve this, allow the nf_queue.c test program to set the FAIL_OPEN
flag so that the segmented skbs bypass the queueing step in the kernel
if the receive buffer is full.
Also, reduce number of sending socat instances, decrease their priority
and increase nice value for the nf_queue program itself to reduce the
probability of overruns happening in the first place.
Fixes: 59ecffa399 ("selftests: netfilter: nft_queue.sh: add udp fraglist gro test case")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20260218184114.0b405b72@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260226161920.1205-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new test file bridge_vlan_dump.sh with four test cases that verify
VLANs with different per-VLAN options are not incorrectly grouped into
ranges in the dump output.
The tests verify the kernel's br_vlan_opts_eq_range() function correctly
prevents VLAN range grouping when neigh_suppress, mcast_max_groups,
mcast_n_groups, or mcast_enabled options differ.
Each test verifies that VLANs with different option values appear as
individual entries rather than ranges, and that VLANs with matching
values are properly grouped together.
Example output:
$ ./bridge_vlan_dump.sh
TEST: VLAN range grouping with neigh_suppress [ OK ]
TEST: VLAN range grouping with mcast_max_groups [ OK ]
TEST: VLAN range grouping with mcast_n_groups [ OK ]
TEST: VLAN range grouping with mcast_enabled [ OK ]
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260225143956.3995415-3-danieller@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The child_ns_mode sysctl parameter becomes write-once in a future patch
in this series, which breaks existing tests. This patch updates the
tests to respect this new policy. No additional tests are added.
Add "global-parent" and "local-parent" namespaces as intermediaries to
spawn namespaces in the given modes. This avoids the need to change
"child_ns_mode" in the init_ns. nsenter must be used because ip netns
unshares the mount namespace so nested "ip netns add" breaks exec calls
from the init ns. Adds nsenter to the deps check.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-1-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test for the issue that was fixed in "team: avoid NETDEV_CHANGEMTU
event when unregistering slave".
The test hangs due to a reference count leak without the fix:
# make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests
[...]
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net/team: refleak.sh
[ 50.681299][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3
[ 71.185325][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3
And passes with the fix:
# make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests
[...]
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net/team: refleak.sh
ok 1 selftests: drivers/net/team: refleak.sh
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260224125709.317574-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a packetdrill test that verifies we accept bare FIN packets when
the advertised receive window is zero.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260224-fix_zero_wnd_fin-v2-2-a16677ea7cea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0.
- Fix 'objtool' warning for Rust 1.84.0.
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0.
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate).
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust 1.95.0.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmmaEt0ACgkQGXyLc2ht
IW0HMBAAvWE97pcuuPoj/3edacMTsUkmeRNssLd5PNwMrt7MjtZiH+2L01/EJ+U0
JrGaTLVEWzghOZX5TvdbaWzo6sfU9MvKmRx7mHJbx6EN+NoYSZ0eTN0LndQEQtVm
64VPYXRCiy06w6GsPcVaY4CVuqk+BLfZfom2nP/bDbgi3SwBi+nuQurrzw4f/JzJ
zLDG4hzTkWIp2JTZLNHhxGWVOumKkZYTYAfkgpzy8ihLZou32fhftOAuFqs33qOm
vYD4PVaszQcJsCoHkevLFRPVQ/Ew2B4M2vZZgWnCgfVgxmnOcwqjhj/8KhHqQv21
QYdUa+NEsSDjcuGJcPEZee0a4bp8EoumhTH0/BsVuxsgol3PTY5Y5jM7aBmsOlu5
lhhcmh3bJ8Srxpa4U2zCy+AMNR8ZLGR9QQNm0YpfhG+Z1is7Yg/XBB+sCuP7CdB0
JI1RNQVVmY3M11AtJB4xtT8NEu4HDf90NQa8RVNR824XHGiix2wVM2lBCr/CJCGK
kTeM1Fb9Lqsb29qFCq12ZbUUgsVpvF/H+L5uOKzsINetWRbpJLBbC8nghCydVzxb
1bytEBk6zLMG5we1m1wLUeVtMvwfL/ut5ptiRExufgMf/BLU/f7QdSyKE1ZtvBbX
Ed20io8EChQFdcKkFHiyeYY1xuLl9ViFN80SH7LlrNGxp6eJEdA=
=DOG1
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0
- Fix 'objtool' warning for Rust 1.84.0
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate)
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust
1.95.0"
* tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: list: Add unsafe blocks for container_of and safety comments
rust: pin-init: replace clippy `expect` with `allow`
rust: irq: add `'static` bounds to irq callbacks
objtool/rust: add one more `noreturn` Rust function
rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0
- Introduce 'perf sched stats' tool with record/report/diff workflows
using schedstat counters.
- Add a faster libdw based addr2line implementation and allow selecting
it or its alternatives via 'perf config addr2line.style='.
- Data-type profiling fixes and improvements including the ability
to select fields using 'perf report''s -F/-fields, e.g.:
'perf report --fields overhead,type'
- Add 'perf test' regression tests for Data-type profiling with
C and Rust workloads.
- Fix srcline printing with inlines in callchains, make sure this has
coverage in 'perf test'.
- Fix printing of leaf IP in LBR callchains.
- Fix display of metrics without sufficient permission in 'perf stat'.
- Print all machines in 'perf kvm report -vvv', not just the host.
- Switch from SHA-1 to BLAKE2s for build ID generation, remove SHA-1
code.
- Fix 'perf report's histogram entry collapsing with '-F' option.
- Use system's cacheline size instead of a hardcoded value in 'perf
report'.
- Allow filtering conversion by time range in 'perf data'.
- Cover conversion to CTF using 'perf data' in 'perf test'.
- Address newer glibc const-correctness (-Werror=discarded-qualifiers)
issues.
- Fixes and improvements for ARM's CoreSight support, simplify ARM SPE
event config in 'perf mem', update docs for 'perf c2c' including the
ARM events it can be used with.
- Build support for generating metrics from arch specific python script,
add extra AMD, Intel, ARM64 metrics using it.
- Add AMD Zen 6 events and metrics.
- Add JSON file with OpenHW Risc-V CVA6 hardware counters.
- Add 'perf kvm' stats live testing.
- Add more 'perf stat' tests to 'perf test'.
- Fix segfault in `perf lock contention -b/--use-bpf`
- Fix various 'perf test' cases for s390.
- Build system cleanups, bump minimum shellcheck version to 0.7.2
- Support building the capstone based annotation routines as a plugin.
- Allow passing extra Clang flags via EXTRA_BPF_FLAGS.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCaZn25QAKCRCyPKLppCJ+
J9MbAQCTKChBwDsqVh5iPr0UAc+mez9LOPJFa580SYH9nmd1jgD+Oqip7xCf514G
ZtYPNh+Mz0se0Mcb++syLUEjxvbrQQY=
=y2VY
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v7.0-1-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf sched stats' tool with record/report/diff workflows
using schedstat counters
- Add a faster libdw based addr2line implementation and allow selecting
it or its alternatives via 'perf config addr2line.style='
- Data-type profiling fixes and improvements including the ability to
select fields using 'perf report''s -F/-fields, e.g.:
'perf report --fields overhead,type'
- Add 'perf test' regression tests for Data-type profiling with C and
Rust workloads
- Fix srcline printing with inlines in callchains, make sure this has
coverage in 'perf test'
- Fix printing of leaf IP in LBR callchains
- Fix display of metrics without sufficient permission in 'perf stat'
- Print all machines in 'perf kvm report -vvv', not just the host
- Switch from SHA-1 to BLAKE2s for build ID generation, remove SHA-1
code
- Fix 'perf report's histogram entry collapsing with '-F' option
- Use system's cacheline size instead of a hardcoded value in 'perf
report'
- Allow filtering conversion by time range in 'perf data'
- Cover conversion to CTF using 'perf data' in 'perf test'
- Address newer glibc const-correctness (-Werror=discarded-qualifiers)
issues
- Fixes and improvements for ARM's CoreSight support, simplify ARM SPE
event config in 'perf mem', update docs for 'perf c2c' including the
ARM events it can be used with
- Build support for generating metrics from arch specific python
script, add extra AMD, Intel, ARM64 metrics using it
- Add AMD Zen 6 events and metrics
- Add JSON file with OpenHW Risc-V CVA6 hardware counters
- Add 'perf kvm' stats live testing
- Add more 'perf stat' tests to 'perf test'
- Fix segfault in `perf lock contention -b/--use-bpf`
- Fix various 'perf test' cases for s390
- Build system cleanups, bump minimum shellcheck version to 0.7.2
- Support building the capstone based annotation routines as a plugin
- Allow passing extra Clang flags via EXTRA_BPF_FLAGS
* tag 'perf-tools-for-v7.0-1-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (255 commits)
perf test script: Add python script testing support
perf test script: Add perl script testing support
perf script: Allow the generated script to be a path
perf test: perf data --to-ctf testing
perf test: Test pipe mode with data conversion --to-json
perf json: Pipe mode --to-ctf support
perf json: Pipe mode --to-json support
perf check: Add libbabeltrace to the listed features
perf build: Allow passing extra Clang flags via EXTRA_BPF_FLAGS
perf test data_type_profiling.sh: Skip just the Rust tests if code_with_type workload is missing
tools build: Fix feature test for rust compiler
perf libunwind: Fix calls to thread__e_machine()
perf stat: Add no-affinity flag
perf evlist: Reduce affinity use and move into iterator, fix no affinity
perf evlist: Missing TPEBS close in evlist__close()
perf evlist: Special map propagation for tool events that read on 1 CPU
perf stat-shadow: In prepare_metric fix guard on reading NULL perf_stat_evsel
Revert "perf tool_pmu: More accurately set the cpus for tool events"
tools build: Emit dependencies file for test-rust.bin
tools build: Make test-rust.bin be removed by the 'clean' target
...
- Various bug fixes for the example schedulers and selftests.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaZkltg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGR+3AQC2h+P8tZXpQ3tzNRgQ10KvekO+uetee4d3vb4O
db5FDwEAh5Binq/tRSzLm7XEb/YmmP2XmHmhmnbRQL69dzMt5gM=
=agf0
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Various bug fixes for the example schedulers and selftests
* tag 'sched_ext-for-7.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: fix getopt not re-parsed on restart
tools/sched_ext: scx_userland: fix data races on shared counters
tools/sched_ext: scx_pair: fix stride == 0 crash on single-CPU systems
tools/sched_ext: scx_central: fix CPU_SET and skeleton leak on early exit
tools/sched_ext: scx_userland: fix stale data on restart
tools/sched_ext: scx_flatcg: fix potential stack overflow from VLA in fcg_read_stats
selftests/sched_ext: Fix rt_stall flaky failure
tools/sched_ext: scx_userland: fix restart and stats thread lifecycle bugs
tools/sched_ext: scx_central: fix sched_setaffinity() call with the set size
tools/sched_ext: scx_flatcg: zero-initialize stats counter array
After goto restart, optind retains its advanced position from the
previous getopt loop, causing getopt() to immediately return -1.
This silently drops all command-line options on the restarted skeleton.
Reset optind to 1 at the restart label so options are re-parsed.
Affected schedulers: scx_simple, scx_central, scx_flatcg, scx_pair,
scx_sdt, scx_cpu0.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The stats thread reads nr_vruntime_enqueues, nr_vruntime_dispatches,
nr_vruntime_failed, and nr_curr_enqueued concurrently with the main
thread writing them, with no synchronization.
Use __atomic builtins with relaxed ordering for all accesses to these
counters to eliminate the data races.
Only display accuracy is affected, not scheduling correctness.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a test to verify that RSS contexts persist across interface
down/up along with their associated Ntuple filters. Another test
that creates contexts/rules keeping interface down and test their
persistence is also added.
Tested on bnxt_en:
TAP version 13
1..1
# timeout set to 0
# selftests: drivers/net/hw: rss_ctx.py
# TAP version 13
# 1..2
# ok 1 rss_ctx.test_rss_context_persist_create_and_ifdown
# ok 2 rss_ctx.test_rss_context_persist_ifdown_and_create # SKIP Create context not supported with interface down
# # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:1 error:0
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260219185313.2682148-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qSCj
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmmXR6QACgkQ6rmadz2v
bTqVjg/+PZPMKGBMfF5uWk74LWYQIt01ePfHH2QeA4DsOwNK+9Q1+jmCLRPa/diL
Ds//ZIEMatmtdd1eO5aHyGXE1sBsJ02LfKOhsPukQyzD/FtZ4BmQpzpG2mK5o1M5
NAH6wxY+6Tr8UlXQtoTF1FFXSa6Y0vQmkyXofOoUgSBAxTPMGVQnWw4bq7mUAX9A
G6/TnPDgGbNLejPCmu8mERCkqRjIGAgjBUItVeiHbdxymtzjHcrH7nwxuP59djR9
1AhMrJnyV+s7iEMkAKGkE6NOID73R/YQEqmvD1eX0AWvqdR8+4lOHT0KPU039JqT
RQV5JgXSfeEkdUtyvqQJZdiJinjFLOwp4CGcX+DKcvUpAKmLx8q3ihPiuWk8+JOV
fnosXQIeQ7B9EuTvoNoNTfvU/MuV8vWd3/1kQc+KGXhzk944Ypb29zywGEoGZarU
eb7YRtUIsXBo7H2K1juqTvj72jyhG83cbZxE5+pR2gv87yGgUvt0r0u0FvzkQf2c
Fq671n6UaOd+0ZYey7YG9bIc+WMTbsjqVY0f7+3Rcl3Q68we0HHdqiPoF637/a1r
lS6TZLRDJmykDPp03db97UcQml6RKJiyTnTNQVUF4Uk+VF1KTreXK/D8fD401gxZ
GWuLt/bjq8l/EVJOhzpaO0JDejmZVRaOQUX8t9DwstS+FFbSyBs=
=mb+y
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix invalid write loop logic in libbpf's bpf_linker__add_buf() (Amery
Hung)
- Fix a potential use-after-free of BTF object (Anton Protopopov)
- Add feature detection to libbpf and avoid moving arena global
variables on older kernels (Emil Tsalapatis)
- Remove extern declaration of bpf_stream_vprintk() from libbpf headers
(Ihor Solodrai)
- Fix truncated netlink dumps in bpftool (Jakub Kicinski)
- Fix map_kptr grace period wait in bpf selftests (Kumar Kartikeya
Dwivedi)
- Remove hexdump dependency while building bpf selftests (Matthieu
Baerts)
- Complete fsession support in BPF trampolines on riscv (Menglong Dong)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Remove hexdump dependency
libbpf: Remove extern declaration of bpf_stream_vprintk()
selftests/bpf: Use vmlinux.h in test_xdp_meta
bpftool: Fix truncated netlink dumps
libbpf: Delay feature gate check until object prepare time
libbpf: Do not use PROG_TYPE_TRACEPOINT program for feature gating
bpf: Add a map/btf from a fd array more consistently
selftests/bpf: Fix map_kptr grace period wait
selftests/bpf: enable fsession_test on riscv64
selftests/bpf: Adjust selftest due to function rename
bpf, riscv: add fsession support for trampolines
bpf: Fix a potential use-after-free of BTF object
bpf, riscv: introduce emit_store_stack_imm64() for trampoline
libbpf: Fix invalid write loop logic in bpf_linker__add_buf()
libbpf: Add gating for arena globals relocation feature
Total patches: 7
Reviews/patch: 0.57
Reviewed rate: 42%
- The 2 patch series "two fixes in kho_populate()" from Ran Xiaokai
fixes a couple of not-major issues in the kexec handover code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaZaKBAAKCRDdBJ7gKXxA
jpB1AP9UpNzT63aGDnB6G8pgekSdK/I2gypZI3cS7MpBPorRUgEAhcClc2//zWGK
0Wz1rxh3sWIE/pzd/yOEsv+7oQHeDQA=
=oUp2
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-MM updates from Andrew Morton:
- "two fixes in kho_populate()" fixes a couple of not-major issues in
the kexec handover code (Ran Xiaokai)
- misc singletons
* tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/group_cpus: handle const qualifier from clusters allocation type
kho: remove unnecessary WARN_ON(err) in kho_populate()
kho: fix missing early_memunmap() call in kho_populate()
scripts/gdb: implement x86_page_ops in mm.py
objpool: fix the overestimation of object pooling metadata size
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT
delayacct: fix build regression on accounting tool
Total patches: 36
Reviews/patch: 1.77
Reviewed rate: 83%
- The 2 patch series "mm/vmscan: fix demotion targets checks in
reclaim/demotion" from Bing Jiao fixes a couple of issues in the
demotion code - pages were failed demotion and were finding themselves
demoted into disallowed nodes.
- The 11 patch series "Remove XA_ZERO from error recovery of dup_mmap()"
from Liam Howlett fixes a rare mapledtree race and performs a number of
cleanups.
- The 13 patch series "mm: add bitmap VMA flag helpers and convert all
mmap_prepare to use them" from Lorenzo Stoakes implements a lot of
cleanups following on from the conversion of the VMA flags into a
bitmap.
- The 5 patch series "support batch checking of references and unmapping
for large folios" from Baolin Wang implements batching to greatly
improve the performance of reclaiming clean file-backed large folios.
- The 3 patch series "selftests/mm: add memory failure selftests" from
Miaohe Lin does as claimed.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaZaIEQAKCRDdBJ7gKXxA
jj73AQCQDwLoipDiQRGyjB5BDYydymWuDoiB1tlDPHfYAP3b/QD/UQtVlOEXqwM3
naOKs3NQ1pwnfhDaQMirGw2eAnJ1SQY=
=6Iif
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
Add ipv4-mapped-ipv6 case to ksft_runner.sh before
an upcoming TCP fix in this area.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260217142924.1853498-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The verification signature header generation requires converting a
binary certificate to a C array. Previously this only worked with xxd,
and a switch to hexdump has been done in commit b640d556a2
("selftests/bpf: Remove xxd util dependency").
hexdump is a more common utility program, yet it might not be installed
by default. When it is not installed, BPF selftests build without
errors, but tests_progs is unusable: it exits with the 255 code and
without any error messages. When manually reproducing the issue, it is
not too hard to find out that the generated verification_cert.h file is
incorrect, but that's time consuming. When digging the BPF selftests
build logs, this line can be seen amongst thousands others, but ignored:
/bin/sh: 2: hexdump: not found
Here, od is used instead of hexdump. od is coming from the coreutils
package, and this new od command produces the same output when using od
from GNU coreutils, uutils, and even busybox. This is more portable, and
it produces a similar results to what was done before with hexdump:
there is an extra comma at the end instead of trailing whitespaces,
but the C code is not impacted.
Fixes: b640d556a2 ("selftests/bpf: Remove xxd util dependency")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20260218-bpf-sft-hexdump-od-v2-1-2f9b3ee5ab86@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Ensure tools/objtool is cleaned by 'make clean' and 'make mrproper'
- Fix test program for CONFIG_CC_CAN_LINK to avoid a warning, which is
made fatal by -Werror
- Drop explicit LZMA parallel compression in scripts/make_fit.py
- Several fixes for commit 62089b8048 ("kbuild: rpm-pkg: Generate
debuginfo package manually")
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaZYm2AAKCRAdayaRccAa
lg5gAP0aeqyRzFjCAcle4vDqh1bLIY3+RxMgL4/d25tJfq+01wEAlvrLWdDl0eh8
RdncqkIWNQA8YwlQDDVO0K1wcu+Mzw4=
=CoUD
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Ensure tools/objtool is cleaned by 'make clean' and 'make mrproper'
- Fix test program for CONFIG_CC_CAN_LINK to avoid a warning, which is
made fatal by -Werror
- Drop explicit LZMA parallel compression in scripts/make_fit.py
- Several fixes for commit 62089b8048 ("kbuild: rpm-pkg: Generate
debuginfo package manually")
* tag 'kbuild-fixes-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: rpm-pkg: Disable automatic requires for manual debuginfo package
kbuild: rpm-pkg: Fix manual debuginfo generation when using .src.rpm
kernel: rpm-pkg: Restore find-debuginfo.sh approach to -debuginfo package
kbuild: rpm-pkg: Restrict manual debug package creation
scripts/make_fit.py: Drop explicit LZMA parallel compression
kbuild: Fix CC_CAN_LINK detection
kbuild: Add objtool to top-level clean target
An issue was reported that building BPF program which includes both
vmlinux.h and bpf_helpers.h from libbpf fails due to conflicting
declarations of bpf_stream_vprintk().
Remove the extern declaration from bpf_helpers.h to address this.
In order to use bpf_stream_printk() macro, BPF programs are expected
to either include vmlinux.h of the kernel they are targeting, or add
their own extern declaration.
Reported-by: Luca Boccassi <luca.boccassi@gmail.com>
Closes: https://github.com/libbpf/libbpf/issues/947
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260218215651.2057673-3-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Replace linux/* includes with vmlinux.h
- Include errno.h
- Include bpf_tracing_net.h for TC_ACT_* and ETH_*
- Use BPF_STDERR instead of BPF_STREAM_STDERR
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260218215651.2057673-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
nr_cpu_ids / 2 produces stride 0 on a single-CPU system, which later
causes SCX_BUG_ON(i == j) to fire. Validate stride after option
parsing to also catch invalid user-supplied values via -S.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use CPU_SET_S() instead of CPU_SET() on the dynamically allocated
cpuset to avoid a potential out-of-bounds write when nr_cpu_ids
exceeds CPU_SETSIZE.
Also destroy the skeleton before returning on invalid central CPU ID
to prevent a resource leak.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
turbostat.c:8688: rapl_perf_init: Assertion `next_domain < num_domains' failed.
Two recent cleanup patches that were not supposed to change anything
broke the core_id code needed for AMD RAPL initialization:
commit 070e92361e ("tools/power turbostat: Enhance HT enumeration")
commit ddf60e38ca ("tools/power turbostat: Simplify global core_id calculation")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Since we started running selftests in NIPA we have been seeing
tc_actions.sh generate a soft lockup warning on ~20% of the runs.
On the pre-netdev foundation setup it was actually a missed irq
splat from the console. Now it's either that or a lockup.
I initially suspected a socket locking issue since the test
is exercising local loopback with act_mirred.
After hours of staring at this I noticed in strace that ncat
when -o $file is specified _both_ saves the output to the file
and still prints it to stdout. Because the file being sent
is constructed with:
dd conv=sparse status=none if=/dev/zero bs=1M count=2 of=$mirred
^^^^^^^^^
the data printed is all \0. Most terminals don't display nul
characters (and neither does vng output capture save them).
But QEMU's serial console still has to poke them thru which
is very slow and causes the lockup (if the file is >600kB).
Replace the '-o $file' with '> $file'. This speeds the test up
from 2m20s to 18s on debug kernels, and prevents the warnings.
Fixes: ca22da2fbd ("act_mirred: use the backlog for nested calls to mirred ingress")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260214035159.2119699-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink requires that the recv buffer used during dumps is at least
min(PAGE_SIZE, 8k) (see the man page). Otherwise the messages will
get truncated. Make sure bpftool follows this requirement, avoid
missing information on systems with large pages.
Acked-by: Quentin Monnet <qmo@kernel.org>
Fixes: 7084566a23 ("tools/bpftool: Remove libbpf_internal.h usage in bpftool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20260217194150.734701-1-kuba@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since release 2025.12.02:
Add L2 statistics columns for recent Intel processors:
L2MRPS = L2 Cache M-References Per Second
L2%hit = L2 Cache Hit %
Sort work and output by cpu# rather than core#
Minor features and fixes.
-----BEGIN PGP SIGNATURE-----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=UG/p
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2026.02.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Add L2 statistics columns for recent Intel processors:
L2MRPS = L2 Cache M-References Per Second
L2%hit = L2 Cache Hit %
- Sort work and output by cpu# rather than core#
- Minor features and fixes
* tag 'turbostat-2026.02.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (23 commits)
tools/power turbostat: version 2026.02.14
tools/power turbostat: Fix and document --header_iterations
tools/power turbostat: Use strtoul() for iteration parsing
tools/power turbostat: Favor cpu# over core#
tools/power turbostat: Expunge logical_cpu_id
tools/power turbostat: Enhance HT enumeration
tools/power turbostat: Simplify global core_id calculation
tools/power turbostat: Unify even/odd/average counter referencing
tools/power turbostat: Allocate average counters dynamically
tools/power turbostat: Delete core_data.core_id
tools/power turbostat: Rename physical_core_id to core_id
tools/power turbostat: Cleanup package_id
tools/power turbostat: Cleanup internal use of "base_cpu"
tools/power turbostat: Add L2 cache statistics
tools/power turbostat: Remove redundant newlines from err(3) strings
tools/power turbostat: Allow more use of is_hybrid flag
tools/power turbostat: Rename "LLCkRPS" column to "LLCMRPS"
tools/power turbostat.8: Document the "--force" option
tools/power turbostat: Harden against unexpected values
tools/power turbostat: Dump hypervisor name
...
Commit 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
adds a feature gate check that loads a map and BPF program to
test the running kernel supports large direct offsets for LDIMM64
instructions. This check is currently used to calculate arena symbol
offsets during bpf_object__collect_relos, itself called by
bpf_object_open.
However, the program calling bpf_object_open may not have the permissions to
load maps and programs. This is the case with the BPF selftests, where
bpftool is invoked at compilation time during skeleton generation. This
causes errors as the feature gate unexpectedly fails with -EPERM.
Avoid this by moving all the use of the FEAT_LDIMM64_FULL_RANGE_OFF feature gate
to BPF object preparation time instead.
Fixes: 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260217204345.548648-3-emil@etsalapatis.com
Commit 728ff16791 uses a PROG_TYPE_TRACEPOINT BPF test program to
check whether the running kernel supports large LDIMM64 offsets. The
feature gate incorrectly assumes that the program will fail at
verification time with one of two messages, depending on whether the
feature is supported by the running kernel. However,
PROG_TYPE_TRACEPOINT programs may fail to load before verification even
starts, e.g., if the shell does not have the appropriate capabilities.
Use a BPF_PROG_TYPE_SOCKET_FILTER program for the feature gate instead.
Also fix two minor issues. First, ensure the log buffer for the test is
initialized: Failing program load before verification led to libbpf dumping
uninitialized data to stdout. Also, ensure that close() is only called
for program_fd in the probe if the program load actually succeeded. The
call was currently failing silently with -EBADF most of the time.
Fixes: 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260217204345.548648-2-emil@etsalapatis.com
Here is the "big" set of USB and Thunderbolt driver updates for 7.0-rc1.
Overall more lines were removed than added, thanks to dropping the
obsolete isp1362 USB host controller driver, always a nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaZR0Sw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylcCgCfUyUFi0UOMPRyrU/fo5nyeWomgvsAnRst3nva
y7BvYwC2L4FIP23snrTM
=8S4Q
-----END PGP SIGNATURE-----
Merge tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
The tests use the tc pedit action to modify the IPv4 source address
("pedit ex munge ip src set"), but the IP header checksum is not
recalculated after the modification. As a result, the modified packet
fails sanity checks in br_netfilter after bridging and is dropped,
which causes the test to fail.
Fix this by ensuring net.bridge.bridge-nf-call-iptables is set to 0
during the test execution. This prevents the bridge from passing
L2 traffic to netfilter, bypassing the checksum validation that
causes the test failure.
Fixes: 92ad382894 ("selftests: forwarding: Add a test for pedit munge SIP and DIP")
Fixes: 226657ba23 ("selftests: forwarding: Add a forwarding test for pedit munge dsfield")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-4-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv6 packet has an incorrect payload length set in the IPv6 header.
After VXLAN decapsulation, such packets do not pass sanity checks in
br_netfilter and are dropped, which causes the test to fail.
Fix this by setting the correct IPv6 payload length for the encapsulated
packet generated by mausezahn, so that the packet is accepted
by br_netfilter.
tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
lines 698-706
)"00:03:"$( : Payload length
)"3a:"$( : Next header
)"04:"$( : Hop limit
)"$saddr:"$( : IP saddr
)"$daddr:"$( : IP daddr
)"80:"$( : ICMPv6.type
)"00:"$( : ICMPv6.code
)"00:"$( : ICMPv6.checksum
)
Data after IPv6 header:
• 80: — 1 byte (ICMPv6 type)
• 00: — 1 byte (ICMPv6 code)
• 00: — 1 byte (ICMPv6 checksum, truncated)
Total: 3 bytes → 00:03 is correct. The old value 00:08 did not match
the actual payload size.
Fixes: b07e9957f2 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-3-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv4 packet contains a zero IP header checksum. After VXLAN
decapsulation, such packets do not pass sanity checks in br_netfilter
and are dropped, which causes the test to fail.
Fix this by calculating and setting a valid IPv4 header checksum for the
encapsulated packet generated by mausezahn, so that the packet is accepted
by br_netfilter. Fixed by using the payload_template_calc_checksum() /
payload_template_expand_checksum() helpers that are only available
in v6.3 and newer kernels.
Fixes: a0b61f3d8e ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recently we were able to trigger a warning in the mdb_n_entries counting
code. Add tests that exercise different ways which used to trigger that
warning.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://patch.msgid.link/20260213070031.1400003-3-nikolay@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add check_rx_hds test that verifies header/data split works across
payload sizes. The test sweeps payload sizes from 1 byte to 8KB, if any
data propagates up to userspace as SCM_DEVMEM_LINEAR, then the test
fails. This shows that regardless of payload size, ncdevmem's
configuration of hds-thresh to 0 is respected.
Add -L (--fail-on-linear) flag to ncdevmem that causes the receiver to
fail if any SCM_DEVMEM_LINEAR cmsg is received.
Use socat option for fixed block sizing and tcp nodelay to disable
nagle's algo to avoid buffering.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260211-fbnic-tcp-hds-fixes-v1-4-55d050e6f606@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reset all counters, tasks and vruntime_head list on restart.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
fcg_read_stats() had a VLA allocating 21 * nr_cpus * 8 bytes on the
stack, risking stack overflow on large CPU counts (nr_cpus can be up
to 512).
Fix by using a single heap allocation with the correct size, reusing
it across all stat indices, and freeing it at the end.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
