Commit graph

101906 commits

Author SHA1 Message Date
Linus Torvalds
722df25ddf kernel-6.18-rc1.clone3
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZgMQAKCRCRxhvAZXjc
 ornXAP954dZjz+OJw6lJLCf0j9TXJOczGHvK3oW5ZD9KnqtTdwEA7p1A6WMOKJyl
 8VtTgCS0yNt8QlznUnsSDfVm0jXVGAY=
 =tUXG
 -----END PGP SIGNATURE-----

Merge tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull copy_process updates from Christian Brauner:
 "This contains the changes to enable support for clone3() on nios2
  which apparently is still a thing.

  The more exciting part of this is that it cleans up the inconsistency
  in how the 64-bit flag argument is passed from copy_process() into the
  various other copy_*() helpers"

[ Fixed up rv ltl_monitor 32-bit support as per Sasha Levin in the merge ]

* tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  nios2: implement architecture-specific portion of sys_clone3
  arch: copy_thread: pass clone_flags as u64
  copy_process: pass clone_flags as u64 across calltree
  copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)
2025-09-29 10:36:50 -07:00
Linus Torvalds
b786405685 vfs-6.18-rc1.workqueue
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQYgAKCRCRxhvAZXjc
 olgGAQDWr4sD7kUt8TxifdAXsQNgyGG8qOUkb/BHHSqJ/5mKvAEAlTwJ+81tgNKT
 hYYdPyvWdbgW6CnWeiQLi0JjpFvUPQU=
 =uHwG
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull vfs workqueue updates from Christian Brauner:
 "This contains various workqueue changes affecting the filesystem
  layer.

  Currently if a user enqueue a work item using schedule_delayed_work()
  the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
  WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies
  to schedule_work() that is using system_wq and queue_work(), that
  makes use again of WORK_CPU_UNBOUND.

  This replaces the use of system_wq and system_unbound_wq. system_wq is
  a per-CPU workqueue which isn't very obvious from the name and
  system_unbound_wq is to be used when locality is not required.

  So this renames system_wq to system_percpu_wq, and system_unbound_wq
  to system_dfl_wq.

  This also adds a new WQ_PERCPU flag to allow the fs subsystem users to
  explicitly request the use of per-CPU behavior. Both WQ_UNBOUND and
  WQ_PERCPU flags coexist for one release cycle to allow callers to
  transition their calls. WQ_UNBOUND will be removed in a next release
  cycle"

* tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: WQ_PERCPU added to alloc_workqueue users
  fs: replace use of system_wq with system_percpu_wq
  fs: replace use of system_unbound_wq with system_dfl_wq
2025-09-29 10:27:17 -07:00
Linus Torvalds
e571372101 vfs-6.18-rc1.pidfs
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQVAAKCRCRxhvAZXjc
 oqs7AP9zh3RdSi/M4LooS+eqKmrQensr2UzUmvXkjCPpld7rVgD/TmSYnRCuSFFE
 B72t7OrjDRf3S7uvV0CXEwx7s+B2Uwk=
 =xQC4
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.18-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull pidfs updates from Christian Brauner:
 "This just contains a few changes to pid_nr_ns() to make it more robust
  and cleans up or improves a few users that ab- or misuse it currently"

* tag 'vfs-6.18-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  pid: change task_state() to use task_ppid_nr_ns()
  pid: change bacct_add_tsk() to use task_ppid_nr_ns()
  pid: make __task_pid_nr_ns(ns => NULL) safe for zombie callers
  pid: Add a judgment for ns null in pid_nr_ns
2025-09-29 10:02:35 -07:00
Linus Torvalds
029a4eb589 vfs-6.18-rc1.iomap
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQTQAKCRCRxhvAZXjc
 osmAAQCtiJC1AJi+LE+uHNKjlTCm5c6X7Oo0YPgqJ9tNlCoVpwEA2Rmu/r/WA0U1
 MJPRbdHgBWXh1kmcdtE735tmfgrREgE=
 =tL5r
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.18-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull vfs iomap updates from Christian Brauner:
 "This contains minor fixes and cleanups to the iomap code.

  Nothing really stands out here"

* tag 'vfs-6.18-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  iomap: error out on file IO when there is no inline_data buffer
  iomap: trace iomap_zero_iter zeroing activities
2025-09-29 09:52:14 -07:00
Linus Torvalds
56e7b31071 vfs-6.18-rc1.inode
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQQgAKCRCRxhvAZXjc
 oud9AQD5IG4sNnzCjsvcTDpQkbX5eZW+LFIiAiiN+nztZ+OcRQEAvC2N7YovfqM3
 TWpVoNDKvEPdtDc9ttFMUKqBZYvxvgE=
 =sEaL
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.18-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull vfs inode updates from Christian Brauner:
 "This contains a series I originally wrote and that Eric brought over
  the finish line. It moves out the i_crypt_info and i_verity_info
  pointers out of 'struct inode' and into the fs-specific part of the
  inode.

  So now the few filesytems that actually make use of this pay the price
  in their own private inode storage instead of forcing it upon every
  user of struct inode.

  The pointer for the crypt and verity info is simply found by storing
  an offset to its address in struct fsverity_operations and struct
  fscrypt_operations. This shrinks struct inode by 16 bytes.

  I hope to move a lot more out of it in the future so that struct inode
  becomes really just about very core stuff that we need, much like
  struct dentry and struct file, instead of the dumping ground it has
  become over the years.

  On top of this are a various changes associated with the ongoing inode
  lifetime handling rework that multiple people are pushing forward:

   - Stop accessing inode->i_count directly in f2fs and gfs2. They
     simply should use the __iget() and iput() helpers

   - Make the i_state flags an enum

   - Rework the iput() logic

     Currently, if we are the last iput, and we have the I_DIRTY_TIME
     bit set, we will grab a reference on the inode again and then mark
     it dirty and then redo the put. This is to make sure we delay the
     time update for as long as possible

     We can rework this logic to simply dec i_count if it is not 1, and
     if it is do the time update while still holding the i_count
     reference

     Then we can replace the atomic_dec_and_lock with locking the
     ->i_lock and doing atomic_dec_and_test, since we did the
     atomic_add_unless above

   - Add an icount_read() helper and convert everyone that accesses
     inode->i_count directly for this purpose to use the helper

   - Expand dump_inode() to dump more information about an inode helping
     in debugging

   - Add some might_sleep() annotations to iput() and associated
     helpers"

* tag 'vfs-6.18-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: add might_sleep() annotation to iput() and more
  fs: expand dump_inode()
  inode: fix whitespace issues
  fs: add an icount_read helper
  fs: rework iput logic
  fs: make the i_state flags an enum
  fs: stop accessing ->i_count directly in f2fs and gfs2
  fsverity: check IS_VERITY() in fsverity_cleanup_inode()
  fs: remove inode::i_verity_info
  btrfs: move verity info pointer to fs-specific part of inode
  f2fs: move verity info pointer to fs-specific part of inode
  ext4: move verity info pointer to fs-specific part of inode
  fsverity: add support for info in fs-specific part of inode
  fs: remove inode::i_crypt_info
  ceph: move crypt info pointer to fs-specific part of inode
  ubifs: move crypt info pointer to fs-specific part of inode
  f2fs: move crypt info pointer to fs-specific part of inode
  ext4: move crypt info pointer to fs-specific part of inode
  fscrypt: add support for info in fs-specific part of inode
  fscrypt: replace raw loads of info pointer with helper function
2025-09-29 09:42:30 -07:00
Linus Torvalds
3a2a5b278f vfs-6.18-rc1.mount
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQOwAKCRCRxhvAZXjc
 oth/AQDvlOo+23/f2djgDGS8akjkBYVLW14OYzC0q5cbEnnGgAEAycHL50pp3n1o
 3jMYlCByuv507vpCsDupo7QcJapmQAk=
 =/NwE
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.18-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull vfs mount updates from Christian Brauner:
 "This contains some work around mount api handling:

   - Output the warning message for mnt_too_revealing() triggered during
     fsmount() to the fscontext log. This makes it possible for the
     mount tool to output appropriate warnings on the command line.

     For example, with the newest fsopen()-based mount(8) from
     util-linux, the error messages now look like:

       # mount -t proc proc /tmp
       mount: /tmp: fsmount() failed: VFS: Mount too revealing.
              dmesg(1) may have more information after failed mount system call.

   - Do not consume fscontext log entries when returning -EMSGSIZE

     Userspace generally expects APIs that return -EMSGSIZE to allow for
     them to adjust their buffer size and retry the operation.

     However, the fscontext log would previously clear the message even
     in the -EMSGSIZE case.

     Given that it is very cheap for us to check whether the buffer is
     too small before we remove the message from the ring buffer, let's
     just do that instead.

   - Drop an unused argument from do_remount()"

* tag 'vfs-6.18-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  vfs: fs/namespace.c: remove ms_flags argument from do_remount
  selftests/filesystems: add basic fscontext log tests
  fscontext: do not consume log entries when returning -EMSGSIZE
  vfs: output mount_too_revealing() errors to fscontext
  docs/vfs: Remove mentions to the old mount API helpers
  fscontext: add custom-prefix log helpers
  fs: Remove mount_bdev
  fs: Remove mount_nodev
2025-09-29 09:32:34 -07:00
Christian Brauner
6c7ca6a02f mount: handle NULL values in mnt_ns_release()
When calling in listmount() mnt_ns_release() may be passed a NULL
pointer. Handle that case gracefully.

Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-09-29 09:08:18 -07:00
Linus Torvalds
b7ce6fa90f vfs-6.18-rc1.misc
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaNZQMQAKCRCRxhvAZXjc
 omNLAQCgrwzd9sa1JTlixweu3OAxQlSEbLuMpEv7Ztm+B7Wz0AD9HtwPC44Kev03
 GbMcB2DCFLC4evqYECj6IG7NBmoKsAs=
 =1ICf
 -----END PGP SIGNATURE-----

Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs

Pull misc vfs updates from Christian Brauner:
 "This contains the usual selections of misc updates for this cycle.

  Features:

   - Add "initramfs_options" parameter to set initramfs mount options.
     This allows to add specific mount options to the rootfs to e.g.,
     limit the memory size

   - Add RWF_NOSIGNAL flag for pwritev2()

     Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
     signal from being raised when writing on disconnected pipes or
     sockets. The flag is handled directly by the pipe filesystem and
     converted to the existing MSG_NOSIGNAL flag for sockets

   - Allow to pass pid namespace as procfs mount option

     Ever since the introduction of pid namespaces, procfs has had very
     implicit behaviour surrounding them (the pidns used by a procfs
     mount is auto-selected based on the mounting process's active
     pidns, and the pidns itself is basically hidden once the mount has
     been constructed)

     This implicit behaviour has historically meant that userspace was
     required to do some special dances in order to configure the pidns
     of a procfs mount as desired. Examples include:

     * In order to bypass the mnt_too_revealing() check, Kubernetes
       creates a procfs mount from an empty pidns so that user
       namespaced containers can be nested (without this, the nested
       containers would fail to mount procfs)

       But this requires forking off a helper process because you cannot
       just one-shot this using mount(2)

     * Container runtimes in general need to fork into a container
       before configuring its mounts, which can lead to security issues
       in the case of shared-pidns containers (a privileged process in
       the pidns can interact with your container runtime process)

       While SUID_DUMP_DISABLE and user namespaces make this less of an
       issue, the strict need for this due to a minor uAPI wart is kind
       of unfortunate

       Things would be much easier if there was a way for userspace to
       just specify the pidns they want. So this pull request contains
       changes to implement a new "pidns" argument which can be set
       using fsconfig(2):

           fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
           fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);

       or classic mount(2) / mount(8):

           // mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
           mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");

  Cleanups:

   - Remove the last references to EXPORT_OP_ASYNC_LOCK

   - Make file_remove_privs_flags() static

   - Remove redundant __GFP_NOWARN when GFP_NOWAIT is used

   - Use try_cmpxchg() in start_dir_add()

   - Use try_cmpxchg() in sb_init_done_wq()

   - Replace offsetof() with struct_size() in ioctl_file_dedupe_range()

   - Remove vfs_ioctl() export

   - Replace rwlock() with spinlock in epoll code as rwlock causes
     priority inversion on preempt rt kernels

   - Make ns_entries in fs/proc/namespaces const

   - Use a switch() statement() in init_special_inode() just like we do
     in may_open()

   - Use struct_size() in dir_add() in the initramfs code

   - Use str_plural() in rd_load_image()

   - Replace strcpy() with strscpy() in find_link()

   - Rename generic_delete_inode() to inode_just_drop() and
     generic_drop_inode() to inode_generic_drop()

   - Remove unused arguments from fcntl_{g,s}et_rw_hint()

  Fixes:

   - Document @name parameter for name_contains_dotdot() helper

   - Fix spelling mistake

   - Always return zero from replace_fd() instead of the file descriptor
     number

   - Limit the size for copy_file_range() in compat mode to prevent a
     signed overflow

   - Fix debugfs mount options not being applied

   - Verify the inode mode when loading it from disk in minixfs

   - Verify the inode mode when loading it from disk in cramfs

   - Don't trigger automounts with RESOLVE_NO_XDEV

     If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
     through automounts, but could still trigger them

   - Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
     tracepoints

   - Fix unused variable warning in rd_load_image() on s390

   - Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD

   - Use ns_capable_noaudit() when determining net sysctl permissions

   - Don't call path_put() under namespace semaphore in listmount() and
     statmount()"

* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
  fcntl: trim arguments
  listmount: don't call path_put() under namespace semaphore
  statmount: don't call path_put() under namespace semaphore
  pid: use ns_capable_noaudit() when determining net sysctl permissions
  fs: rename generic_delete_inode() and generic_drop_inode()
  init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
  initramfs: Replace strcpy() with strscpy() in find_link()
  initrd: Use str_plural() in rd_load_image()
  initramfs: Use struct_size() helper to improve dir_add()
  initrd: Fix unused variable warning in rd_load_image() on s390
  fs: use the switch statement in init_special_inode()
  fs/proc/namespaces: make ns_entries const
  filelock: add FL_RECLAIM to show_fl_flags() macro
  eventpoll: Replace rwlock with spinlock
  selftests/proc: add tests for new pidns APIs
  procfs: add "pidns" mount option
  pidns: move is-ancestor logic to helper
  openat2: don't trigger automounts with RESOLVE_NO_XDEV
  namei: move cross-device check to __traverse_mounts
  namei: remove LOOKUP_NO_XDEV check from handle_mounts
  ...
2025-09-29 09:03:07 -07:00
Stefan Metzmacher
1b53426334 smb: server: let smb_direct_flush_send_list() invalidate a remote key first
If we want to invalidate a remote key we should do that as soon as
possible, so do it in the first send work request.

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
942ce74ab9 smb: server: make use of ib_alloc_cq_any() instead of ib_alloc_cq()
commit 20cf4e0267 ("rdma: Enable ib_alloc_cq to spread work over a
device's comp_vectors") happened before ksmbd was upstreamed,
but after the out of tree ksmbd (a.k.a. cifsd) was developed.
So we still used ib_alloc_cq().

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
8aa23bae60 smb: server: make consitent use of spin_lock_irq{save,restore}() in transport_rdma.c
There is a mix of using spin_lock() and spin_lock_irq(), which
is confusing as IB_POLL_WORKQUEUE is used and no code would
be called from any interrupt. So using spin_lock() or even
mutexes would be ok.

But we'll soon share common code with the client, which uses
IB_POLL_SOFTIRQ.

And Documentation/kernel-hacking/locking.rst section
"Cheat Sheet For Locking" says:

-  Otherwise (== data can be touched in an interrupt), use
   spin_lock_irqsave() and
   spin_unlock_irqrestore().

So in order to keep it simple and safe we use that version
now. It will help merging functions into common code and
have consistent locking in all cases.

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
0491f26f89 smb: server: let {free_transport,smb_direct_disconnect_rdma_{work,connection}}() wake up all wait queues
This is important in order to let all waiters notice a broken connection.

We also go via smb_direct_disconnect_rdma_{work,connection}() for broken
connections.

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
7d729df994 smb: server: let smb_direct_disconnect_rdma_connection() disable all work but disconnect_work
There's no point run these if we already know the connection
is broken.

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
3d71e7cdbc smb: server: fill in smbdirect_socket.first_error on error
For now we just use -ECONNABORTED, but it will get more detailed
later.

Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
b3fd52a0d8 smb: server: let smb_direct_disconnect_rdma_connection() set SMBDIRECT_SOCKET_ERROR...
smb_direct_disconnect_rdma_connection() should turn the status into
an error state instead of leaving it as is until
smb_direct_disconnect_rdma_work() is running.

Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
9d00508747 smb: server: pass struct smbdirect_socket to smb_direct_send_negotiate_response()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
5e90c56e0e smb: server: pass struct smbdirect_socket to {enqueue,get_first}_reassembly()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
c0cb9823ac smb: server: pass struct smbdirect_socket to smb_direct_post_send_data()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
ab83128e65 smb: server: pass struct smbdirect_socket to post_sendmsg()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
0a715db380 smb: server: pass struct smbdirect_socket to smb_direct_create_header()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
4d1dffe0a0 smb: server: pass struct smbdirect_socket to manage_keep_alive_before_sending()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
663b3c3c86 smb: server: pass struct smbdirect_socket to manage_credits_prior_sending()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
b156d2c559 smb: server: pass struct smbdirect_socket to calc_rw_credits()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
cae2d9a229 smb: server: pass struct smbdirect_socket to wait_for_rw_credits()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:54 -05:00
Stefan Metzmacher
2dc6c7e8ba smb: server: pass struct smbdirect_socket to wait_for_send_credits()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
7f4805b7db smb: server: pass struct smbdirect_socket to wait_for_credits()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
d14910bbf6 smb: server: pass struct smbdirect_socket to smb_direct_flush_send_list()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
ecb56dbc93 smb: server: pass struct smbdirect_socket to smb_direct_post_send()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
56b442a248 smb: server: remove unused struct struct smb_direct_transport argument from smb_direct_send_ctx_init()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
789cfc2ffa smb: server: pass struct smbdirect_socket to smb_direct_{alloc,free}_sendmsg()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
100aec545a smb: server: pass struct smbdirect_socket to smb_direct_connect()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
7cb0ab73f8 smb: server: pass struct smbdirect_socket to smb_direct_prepare_negotiation()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
56bcc18d24 smb: server: pass struct smbdirect_socket to smb_direct_accept_client()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
9221b12b35 smb: server: pass struct smbdirect_socket to smb_direct_post_recv()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
cf78939647 smb: server: pass struct smbdirect_socket to smb_direct_create_qpair()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
f75c226db0 smb: server: pass struct smbdirect_socket to smb_direct_qpair_handler()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
56227a7aa5 smb: server: pass struct smbdirect_socket to smb_direct_cm_handler()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
ece37ea815 smb: server: pass struct smbdirect_socket to smb_direct_disconnect_rdma_connection()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
a25075f112 smb: server: pass struct smbdirect_socket to smb_direct_init_params()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
57131bf9e8 smb: server: pass struct smbdirect_socket to smb_direct_get_max_fr_pages()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
ce85071d2c smb: server: pass struct smbdirect_socket to smb_direct_{create,destroy}_pools()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
01721df4e3 smb: server: pass struct smbdirect_socket to {get_free,put}_recvmsg()
This will make it easier to move function to the common code
in future.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
da7d45b9a3 smb: server: make use of smbdirect_socket.workqueue
We still use the single global workqueue, but this
will allow us to share common code soon.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
8ad3a97eab smb: server: implement correct keepalive and timeout handling for smbdirect
Now client and server behave in the same way and we can start to
share common functions.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
b8c7776583 smb: server: make use of smbdirect_socket.idle.immediate_work
With this commit the server only uses struct smbdirect_socket!

It doesn't use the idle timer yet, but it will be added soon,
from there we'll be ready split common functions.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
d0b9b967b3 smb: server: make use of smbdirect_socket.rdma.legacy_iwarp
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:53 -05:00
Stefan Metzmacher
49635103e8 smb: server: make use of smbdirect_socket_parameters.{initiator_depth,responder_resources}
This will make it easier to specify these from the outside of the core
code first and then negotiate the value with the peer.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:52 -05:00
Stefan Metzmacher
be3c1d032f smb: server: make use of smbdirect_socket_parameters.negotiate_timeout_msec and change to 5s
The server negotiations timer is just 5 seconds in Windows, so use the
same. See [MS-SMBD] 3.1.7.2 Connection Arrival.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:52 -05:00
Stefan Metzmacher
d70e458239 smb: server: fill smbdirect_socket_parameters at the beginning and use the values from there
This is what we should do and it also simplifies the following changes.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:52 -05:00
Stefan Metzmacher
03a38d8467 smb: server: pass ksmbd_transport to get_smbd_max_read_write_size()
We should use the per connection value.

And for TCP return NT_STATUS_INVALID_PARAMETER if any
SMB2_CHANNEL_RDMA_V1* is used.

Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-09-28 18:29:52 -05:00