The ASL CS5263 is a high-performance DP1.4 to HDMI2.0b converter,
designed to connect a DP1.4 source to an HDMI2.0b sink. The CS5263AN
integrates a DP1.4 compliant receiver, and a HDMI2.0b compliant
transmitter.
Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251121142623.251118-3-ggo@tuxedocomputers.com
ASL Xiamen Technology Co. Ltd. is a Chinese high-speed interface and
display system chip design company. Adding it to the vendor prefixes.
Link: https://www.asl-tek.com/
Signed-off-by: Ettore Chimenti <ettore.chimenti@linaro.org>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251121142623.251118-2-ggo@tuxedocomputers.com
Add a new ite,it66122 compatible string to the IT66121 binding
documentation, since the two chips are practically same except for id
register difference.
Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Davis <afd@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029150636.3118628-2-nm@ti.com
Reason for moving from simple panel is this DDIC has three supplies,
while panel-simple-dsi is limited to one.
Previous compatible only described the DDIC, but didn't include panel
connected to it. Let's fix it, and offer bindings authors two
compatibles to distinguish the connected panel.
Basic description for SOFEF00 DDIC with attached panels
- Samsung AMS601NT22 6.01 inch, 1080x2160 pixels, 18:9 ratio
- Samsung AMS628NW01 6.28 inch, 1080x2280 pixels, 19:9 ratio
There is only one user which uses samsung,sofef00 and it's updated to
comply within this patch series.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-1-6cd55471e84e@ixit.cz
Like w552946aba, w552946aaa uses the Ilitek ILI9881D controller chip,
and it supports up to 2 lanes.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251106020632.92-2-kernel@airkyi.com
Add missing ref on panel-common.yaml for this dsi panel so that common
properties can be shared.
Drop reset-gpios and backlight as they are already in panel-common.
Switch from additionalProperties to unevaluatedProperties so that common
panel properties are available without repeating them in this binding.
Notably panel-common defines the "port" property for linking panels to a
source - which was missing from this panel. Mark it as required.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117-imx8mp-hb-iiot-v3-2-bf1a4cf5fa8e@solid-run.com
LG LD070WX3-SL01 was mistakenly documented as a simple DSI panel, which it
clearly is not. Address this by adding the proper schema for this panel.
There is only one user of this panel binding in the mainline Linux kernel,
which is the Nvidia tablet Tegra Note 7. Its panel is broken anyway since
it cannot initialize properly if the bootloader does not leave a
pre-initialized panel. It also cannot suspend or re-initialize properly,
since no DSI configuration is set and it has a loose regulator which
relies on an always-on property rather than being hooked to the panel
where it belongs.
Tegra Note 7 device tree is adjusted as a part of this series.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-2-clamor95@gmail.com
The Parade PS185HDM is a transparent Displayport to HDMI bridge.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Link: https://patch.msgid.link/20251116-asus_usbc_dp-v2-1-cc8f51136c9f@hotmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add an optional property to RK3588 HDMI TX Controller binding describing
a GPIO line to be asserted when operating in HDMI 2.1 FRL mode and
deasserted for HDMI 1.4/2.0 TMDS.
This is used to control an external voltage bias for HDMI data lines.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251027222641.25066-2-laurent.pinchart@ideasonboard.com
Stephen Rothwell reports htmldocs warnings when merging drm-misc tree:
Documentation/ABI/stable/sysfs-driver-qaic:1: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/stable/sysfs-driver-qaic:1: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Documentation/ABI/stable/sysfs-driver-qaic:1: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
These are caused by DMA Bridge channel (DBC) states list in sysfs ABI
docs. Format it as a table to fix them.
Fixes: f286066ed9 ("accel/qaic: Add DMA Bridge Channel(DBC) sysfs and uevents")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251110135038.29e96051@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110035952.25778-4-bagasdotme@gmail.com
Stephen Rothwell reports htmldocs warnings when merging drm-misc tree:
Documentation/accel/qaic/aic100.rst:502: ERROR: Unexpected indentation. [docutils]
Documentation/accel/qaic/aic100.rst:504: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
Fix these by separating DBC_STATE_* definition list from preceding
paragraph.
Fixes: 9675093ace ("accel/qaic: Implement basic SSR handling")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251110132401.200d88bd@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251110035952.25778-3-bagasdotme@gmail.com
Document support for the DU IP found on the Renesas RZ/V2N (R9A09G056) SoC.
The DU IP is functionally identical to that on the RZ/V2H(P) SoC, so no
driver changes are needed. The existing `renesas,r9a09g057-du` compatible
will be used as a fallback for the RZ/V2N SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251023213350.681602-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Subsystem restart (SSR) for a qaic device means that a NSP has crashed,
and will be restarted. However the restart process will lose any state
associated with activation, so the user will need to do some recovery.
While SSR has the provision to collect a crash dump, this patch does not
implement support for it.
Co-developed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Co-developed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Co-developed-by: Troy Hanson <quic_thanson@quicinc.com>
Signed-off-by: Troy Hanson <quic_thanson@quicinc.com>
Co-developed-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Aswin Venkatesan <aswivenk@qti.qualcomm.com>
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
[jhugo: Fix minor checkpatch whitespace issues]
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-3-zachary.mckevitt@oss.qualcomm.com
Expose sysfs files for each DBC representing the current state of that DBC.
For example, sysfs for DBC ID 0 and accel minor number 0 looks like this,
/sys/class/accel/accel0/dbc0_state
Following are the states and their corresponding values,
DBC_STATE_IDLE (0)
DBC_STATE_ASSIGNED (1)
DBC_STATE_BEFORE_SHUTDOWN (2)
DBC_STATE_AFTER_SHUTDOWN (3)
DBC_STATE_BEFORE_POWER_UP (4)
DBC_STATE_AFTER_POWER_UP (5)
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Signed-off-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251031174059.2814445-2-zachary.mckevitt@oss.qualcomm.com
Sort the enum: list alphabetically. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20251104135716.12497-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
VKMS is no longer in the platform bus, instead, it is in the faux bus.
In addition, when present, IGT picks hardware drivers instead of virtual
drivers, like VKMS or vgem, if they are not forced.
Update the documentation to use IGT_FORCE_DRIVER instead of IGT_DEVICE.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20251024110014.4614-2-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The script is "run-tests.sh", no "run-test.sh".
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20251024110014.4614-1-jose.exposito89@gmail.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
The Mali-based GPU on the MediaTek MT8196 SoC uses a separate MCU to
control the power and frequency of the GPU. This is modelled as a power
domain and clock provider.
It lets us omit the OPP tables from the device tree, as those can now be
enumerated at runtime from the MCU.
Add the necessary schema logic to handle what this SoC expects in terms
of clocks and power-domains.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20251017-mt8196-gpufreq-v8-1-98fc1cc566a1@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
The instance of the GPU populated in Freescale i.MX95 is the
Mali G310, document support for this variant.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20251102160927.45157-1-marek.vasut@mailbox.org
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Fix the following DT schema check warning:
./Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml:103:1: [warning] too many blank lines (2 > 1) (empty-lines)
One newline is enough. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251029194210.129326-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Add device tree bindings for the Tianma TL121BVMS07-00 12.1-inch
MIPI-DSI TFT LCD panel. The panel is based on the Ilitek IL79900A
controller.
Signed-off-by: Langyan Ye <yelangyan@huaqin.corp-partner.google.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251031100447.253164-2-yelangyan@huaqin.corp-partner.google.com
Fix typos in qaic.rst file.
Signed-off-by: Sourab Bera <quic_sourbera@quicinc.com>
Signed-off-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20251024165749.821414-1-youssef.abdulrahman@oss.qualcomm.com
Document the Synaptics TDDI (Touch/Display Integration) panel hardware.
Along with the MIPI-DSI panel, these devices also have an in-built LED
backlight device and a touchscreen, all packed together in a single chip.
Also, add compatibles for supported panels - TD4101 and TD4300. Both
have the '-panel' suffix so as to remove any ambiguity between the panel
and touchscreen chips.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251009-panel-synaptics-tddi-v5-1-59390997644e@disroot.org
Update the panel example in this DT schema to match requirements in binding
display/panel/ilitek,ili9881c.yaml . This fixes the following schema check
warnings:
"
/tmp/dtx/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb: panel@0 (raspberrypi,dsi-7inch): compatible: ['raspberrypi,dsi-7inch'] is too short
from schema $id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml
/tmp/dtx/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb: panel@0 (raspberrypi,dsi-7inch): 'power-supply' is a required property
from schema $id: http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml
"
Fixes: c376a69437 ("dt-bindings: display: bridge: renesas,dsi-csi2-tx: Allow panel@ subnode")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251029200519.214548-1-marek.vasut+renesas@mailbox.org
Basic description for S6E3FC2X01 DDIC with attached panel AMS641RW.
Samsung AMS641RW is 6.41 inch, 1080x2340 pixels, 19.5:9 ratio panel
This panel has three supplies, while panel-simple-dsi is limited to one.
There is no user of this compatible, nor the compatible make sense.
Remove it from simple DSI panel definitions.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251023-s6e3fc2x01-v5-1-8f8852e67417@ixit.cz
Add a binding schema for Arm Ethos-U65/U85 NPU. The Arm Ethos-U NPUs are
designed for edge AI inference applications.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20251020-ethos-v6-1-ecebc383c4b7@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
When a connector is created, add a `status` file to allow to update the
connector status to:
- 1 connector_status_connected
- 2 connector_status_disconnected
- 3 connector_status_unknown
If the device is enabled, updating the status hot-plug or unplugs the
connector.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-17-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Remove the configfs related TODO items from the "Runtime Configuration"
section.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-14-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Create a default subgroup at
/config/vkms/connectors/connector/possible_encoders that will contain
symbolic links to the possible encoders for the connector.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-12-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Create a default subgroup at
/config/vkms/connectors to allow to create as many connectors as
required.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-11-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Create a default subgroup at
/config/vkms/encoders/encoder/possible_crtcs that will contain symbolic
links to the possible CRTCs for the encoder.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-10-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Create a default subgroup at /config/vkms/encoders to allow to create as
many encoders as required.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-9-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Create a default subgroup at /config/vkms/planes/plane/possible_crtcs
that will contain symbolic links to the possible CRTCs for the plane.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-8-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
When a CRTC is created, add a `writeback` file to allow to enable or
disable writeback connector support
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-7-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Create a default subgroup at /config/vkms/crtcs to allow to create as
many CRTCs as required.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-6-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
When a plane is created, add a `type` file to allow to set the type:
- 0 overlay
- 1 primary
- 2 cursor
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-5-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Create a default subgroup at /config/vkms/planes to allow to create as
many planes as required.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-4-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Allow to create, enable, disable and destroy VKMS instances using
configfs.
For the moment, it is not possible to add pipeline items, so trying to
enable the device will fail printing an informative error to the log.
Tested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Link: https://lore.kernel.org/r/20251016175618.10051-3-jose.exposito89@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This controller can have both bridges and panels connected to it. In
order to describe panels properly in DT, pull in dsi-controller.yaml
and disallow only unevaluatedProperties, because the panel node is
optional. Include example binding with panel.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250904210147.186728-4-marek.vasut+renesas@mailbox.org
Rework the current allOf: section such that all handling of
clocks/clock-names properties happens first, and all handling
of power-domains/power-domain-names happens second.
This allows the allOf section to limit various GPU models to
matching clocks count in the first half, and apply the same
for power-domains count in the second half, without conflating
the two limits together.
This makes addition of GPU models with different clocks and
power-domains count easier. No functional change intended.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20251018130147.12831-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
The power-domains items: list is not very informative, replace it
with plain minItems/maxItems instead.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20251018130147.12831-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
