The radiotap parser is currently only used with the radiotap
namespace (not with vendor namespaces), but if the undefined
field 18 is used, the alignment/size is unknown as well. In
this case, iterator->_next_ns_data isn't initialized (it's
only set for skipping vendor namespaces), and syzbot points
out that we later compare against this uninitialized value.
Fix this by moving the rejection of unknown radiotap fields
down to after the in-namespace lookup, so it will really use
iterator->_next_ns_data only for vendor namespaces, even in
case undefined fields are present.
Cc: stable@vger.kernel.org
Fixes: 33e5a2f776 ("wireless: update radiotap parser")
Reported-by: syzbot+b09c1af8764c0097bb19@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/69944a91.a70a0220.2c38d7.00fc.GAE@google.com
Link: https://patch.msgid.link/20260217120526.162647-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1f87f7d3a3 ("cfg80211: add rfkill support")
Cc: stable@vger.kernel.org
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://patch.msgid.link/20260211082024.1967588-1-d.dulov@aladdin.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The IGTK key ID must be 4 or 5, but the code checks against
key ID + 1, so must check against 5/6 rather than 4/5. Fix
that.
Reported-by: Jouni Malinen <j@w1.fi>
Fixes: 08645126dd ("cfg80211: implement wext key handling")
Link: https://patch.msgid.link/20260209181220.362205-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
-----BEGIN PGP SIGNATURE-----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=70Rs
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an option to operate as the RSTA in an FTM measurement request.
When requested, the device will dwell on the requested channel until
the peer starts the FTM negotiation. This option is only valid for
trigger-based/non trigger-based measurement with LMR feedback which
will allow the RSTA to receive the results of the measurement.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.1f95fc0afab4.Iae2d32783b8e7c4a29089fec0f4c6bce94d303cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The FTM result includes some of the periodic measurement negotiated
parameters (like the burst duration and number of bursts), but it
doesn't include the burst period. Add it to the FTM result
notification.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.e0778f86edef.I3c98c1933eb639963bc3ffdef81a8788b59f2188@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Periodic FTM request attributes are defined based on the periodic
parameters used in EDCA-based ranging negotiation. However, non-EDCA
based ranging (trigger-based/non-trigger-based) does not include
periodic parameters in the negotiation protocol, even though upper
layers may still request periodic measurements.
Clarify the semantics of periodic ranging attributes when used with
non-EDCA based ranging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.b89cb3f68e1a.I7a9d8c6d1c66c77f1b43120a841101c96c3f19ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add new capabilities to the PMSR FTM capabilities list. The new
capabilities include 6 GHz support, supported number of spatial streams
and supported number of LTF repetitions.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Tested-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111190221.bf43785c18f6.Ic98cf9790ddee84bf88e5720b93c46c23af3c96c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the AP has an advertised TID to Link Mapping (TTLM) it shall
include the element in the association response. As such, when this
element is present it needs to be used for the currently dormant links.
See Draft P802.11REVmf_D1.0 section 35.3.7.2.3 ("Negotiation of TTLM")
for the details. The flag is also not usable in case userspace wants to
specify a negotiated TTLM during association.
Note that for the link reconfiguration case, mac80211 did not use the
information. Draft P802.11REVmf_D1.0 states in section 35.3.6.4 ("Link
reconfiguration to the setup links) that we "shall operate with all the
TIDs mapped to the newly added links ..."
All this means that the flag is not needed. The implementation should
parse the information from the association response.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260118093904.754e057896a5.Ifd06f5ef839a93bfd54d0593dc932870f95f3242@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
After NAN was started, cluster id updates from the user space should not
happen, since the device already started a cluster with the
previousely provided id.
Since NL80211_CMD_CHANGE_NAN_CONFIG requires to set the full NAN
configuration, we can't require that NL80211_NAN_CONF_CLUSTER_ID won't
be included in this command, and keeping the last confgiured value just
to be able to compare it against the new one seems a bit overkill.
Therefore, just ignore cluster id in this command and clarify the
documentation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107142229.fb55e5853269.I10d18c8f69d98b28916596d6da4207c15ea4abb5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A driver that declared that it has userspace DE should not call NAN func
related APIs such as cfg80211_nan_match and cfg80211_nan_func_terminated
Check and warn in such a case, as this indicates a driver bug.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107141549.86fa96c75211.I8fbb0506377170dd7b41234f20bcba057951dd1e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Seems that there is an assumption that this function should be called
only for netdev interfaces, but it can also be called in suspend, or
from nl80211_netlink_notify (indirectly).
Note that the documentation of NL80211_ATTR_SOCKET_OWNER explicitly
says that NAN interfaces would be destroyed as well in the
nl80211_netlink_notify case.
Fix this by also stopping P2P and NAN.
Fixes: cb3b7d8765 ("cfg80211: add start / stop NAN commands")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107140430.dab142cbef0b.I290cc47836d56dd7e35012ce06bec36c6da688cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
According to Wi-Fi Aware (TM) 4.0 specification 2.8, A NAN device can
have one NAN management interface. This applies also to multi radio
devices.
The current code allows a driver to support more than one NAN interface,
if those are not in the same radio.
Fix it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107135129.fdaecec0fe8a.I246b5ba6e9da3ec1481ff197e47f6ce0793d7118@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Introduce a new netlink attribute NL80211_ATTR_EPP_PEER
to be used with NL80211_CMD_NEW_STA and
NL80211_CMD_ADD_LINK_STA for the userspace to indicate
that a non-AP STA is an Enhanced Privacy Protection (EPP)
peer.
Co-developed-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Rohan Dutta <quic_drohan@quicinc.com>
Signed-off-by: Sai Pratyusha Magam <sai.magam@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260114111900.2196941-5-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, cfg80211 does not allow key installation, removal, or
modification prior to association in non-AP STA mode. However,
Enhanced Privacy Protection Key Exchange (EPPKE) requires encryption
keys to be managed before association.
Add support to manage keys before association in non-AP STA mode when
the NL80211_EXT_FEATURE_ASSOC_FRAME_ENCRYPTION feature flag is set.
If the flag is not set, reject the encryption keys.
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260114111900.2196941-4-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add an extended feature flag NL80211_EXT_FEATURE_EPPKE to allow a
driver to indicate support for the Enhanced Privacy Protection Key
Exchange (EPPKE) authentication protocol in non-AP STA mode, as
defined in "IEEE P802.11bi/D3.0, 12.16.9".
In case of SME in userspace, the Authentication frame body is prepared
in userspace while the driver finalizes the Authentication frame once
it receives the required fields and elements. The driver indicates
support for EPPKE using the extended feature flag so that userspace
can initiate EPPKE authentication.
When the feature flag is set, process EPPKE Authentication frames from
userspace in non-AP STA mode. If the flag is not set, reject EPPKE
Authentication frames.
Define a new authentication type NL80211_AUTHTYPE_EPPKE for EPPKE.
Signed-off-by: Ainy Kumari <ainy.kumari@oss.qualcomm.com>
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260114111900.2196941-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
HT flags don't really make sense when applied to S1G channels
especially given the bandwidths both used for calculations and
conveyed (i.e 20MHz). Similarly with the 80/160/..MHz channels,
each bonded subchannel is validated individually within
cfg80211_s1g_usable(), so the regulatory validation is similarly
redundant. Additionally, usermode application output (such as iwinfo
below) doesn't particularly make sense when enumerating S1G channels:
before:
925.500 MHz (Band: 900 MHz, Channel 47) [NO_HT40+, NO_HT40-, NO_16MHZ]
926.500 MHz (Band: 900 MHz, Channel 49) [NO_HT40+, NO_HT40-, NO_16MHZ]
927.500 MHz (Band: 900 MHz, Channel 51) [NO_HT40+, NO_HT40-, NO_16MHZ, NO_PRIMARY]
after:
925.500 MHz (Band: 900 MHz, Channel 47) [NO_16MHZ]
926.500 MHz (Band: 900 MHz, Channel 49) [NO_16MHZ]
927.500 MHz (Band: 900 MHz, Channel 51) [NO_16MHZ, NO_PRIMARY]
Don't process the S1G band when applying HT flags as both the regulatory
component is redundant and the flags don't make sense for S1G channels.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260113030934.18726-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- ath12k gets an overhaul to support multi-wiphy device
wiphy and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- mac80211 gets some better iteration macros
-----BEGIN PGP SIGNATURE-----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=F1n0
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-01-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First set of changes for the current -next cycle, of note:
- ath12k gets an overhaul to support multi-wiphy device
wiphy and pave the way for future device support in
the same driver (rather than splitting to ath13k)
- mac80211 gets some better iteration macros
* tag 'wireless-next-2026-01-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (120 commits)
wifi: mac80211: remove width argument from ieee80211_parse_bitrates
wifi: mac80211_hwsim: remove NAN by default
wifi: mac80211: improve station iteration ergonomics
wifi: mac80211: improve interface iteration ergonomics
wifi: cfg80211: include S1G_NO_PRIMARY flag when sending channel
wifi: mac80211: unexport ieee80211_get_bssid()
wl1251: Replace strncpy with strscpy in wl1251_acx_fw_version
wifi: iwlegacy: 3945-rs: remove redundant pointer check in il3945_rs_tx_status() and il3945_rs_get_rate()
wifi: mac80211: don't send an unused argument to ieee80211_check_combinations
wifi: libertas: fix WARNING in usb_tx_block
wifi: mwifiex: Allocate dev name earlier for interface workqueue name
wifi: wlcore: sdio: Use pm_ptr instead of #ifdef CONFIG_PM
wifi: cfg80211: Fix use_for flag update on BSS refresh
wifi: brcmfmac: rename function that frees vif
wifi: brcmfmac: fix/add kernel-doc comments
wifi: mac80211: Update csa_finalize to use link_id
wifi: cfg80211: add cfg80211_stop_link() for per-link teardown
wifi: ath12k: Skip DP peer creation for scan vdev
wifi: ath12k: move firmware stats request outside of atomic context
wifi: ath12k: add the missing RCU lock in ath12k_dp_tx_free_txbuf()
...
====================
Link: https://patch.msgid.link/20260112185836.378736-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An integer overflow occurs in cfg80211_calculate_bitrate_he() when
calculating bitrates for high throughput HE configurations.
For example, with 160 MHz bandwidth, HE-MCS 13, HE-NSS 4, and HE-GI 0,
the multiplication (result * rate->nss) overflows the 32-bit 'result'
variable before division by 8, leading to significantly underestimated
bitrate values.
The overflow occurs because the NSS multiplication operates on a 32-bit
integer that cannot accommodate intermediate values exceeding
4,294,967,295. When overflow happens, the value wraps around, producing
incorrect bitrates for high MCS and NSS combinations.
Fix this by utilizing the 64-bit 'tmp' variable for the NSS
multiplication and subsequent divisions via do_div(). This approach
preserves full precision throughout the entire calculation, with the
final value assigned to 'result' only after completing all operations.
Signed-off-by: Veerendranath Jakkam <veerendranath.jakkam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-he_bitrate_overflow-v1-1-95575e466b6e@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Userspace may fail to connect to certain BSS that were initially
marked as unusable due to regulatory restrictions (use_for = 0,
e.g., 6 GHz power type mismatch). Even after these restrictions
are removed and the BSS becomes usable, connection attempts still
fail.
The issue occurs in cfg80211_update_known_bss() where the use_for
flag is updated using bitwise AND (&=) instead of direct assignment.
Once a BSS is marked with use_for = 0, the AND operation masks out
any subsequent non-zero values, permanently keeping the flag at 0.
This causes __cfg80211_get_bss(), invoked by nl80211_assoc_bss(), to
fail the check "(bss->pub.use_for & use_for) != use_for", thereby
blocking association.
Replace the bitwise AND operation with direct assignment so the use_for
flag accurately reflects the current BSS state.
Fixes: d02a12b8e4 ("wifi: cfg80211: add BSS usage reporting")
Signed-off-by: Huang Chenming <chenming.huang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209025733.2098456-1-chenming.huang@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, whenever cfg80211_stop_iface() is called, the entire iface
is stopped. However, there could be a need in AP/P2P_GO mode, where
one would like to stop a single link in MLO operation instead of the
whole MLD interface.
Hence, introduce cfg80211_stop_link() to allow drivers to tear down
only a specified AP/P2P_GO link during MLO operation. Passing -1
preserves the existing behavior of stopping the whole interface. Make
cfg80211_stop_iface() call this function by passing -1 to keep the
default behavior the same, that is, to stop all links and use
cfg80211_stop_link() with the desired link_id for AP/P2P_GO mode, to
stop only that link.
This brings no behavioral change for single-link/non-MLO interfaces,
and enables drivers to stop an AP/P2P_GO link without disrupting other
links on the same interface.
Signed-off-by: Manish Dharanenthiran <manish.dharanenthiran@oss.qualcomm.com>
Link: https://patch.msgid.link/20251127-stop_link-v2-1-43745846c5fd@qti.qualcomm.com
[make cfg80211_stop_iface() inline]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The QGenie AI code review tool says we should store the capped length to
wdev->u.client.ssid_len. The AI is correct.
Fixes: 62b635dcd6 ("wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aTAbp5RleyH_lnZE@stanley.mountain
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The chandef now includes a flag denoting the use of a 2MHz primary
channel for S1G interfaces, include this when sending the chandef.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20251125025927.245280-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If an interface is set down or, per the previous patch, changes
type, radar detection for it should be cancelled. This is done
for AP mode in mac80211 (somewhat needlessly, since cfg80211 can
do it, but didn't until now), but wasn't handled for mesh, so if
radar detection was started and then the interface set down or
its type switched (the latter sometimes happning in the hwsim
test 'mesh_peer_connected_dfs'), radar detection would be around
with the interface unknown to the driver, later leading to some
warnings around chanctx usage.
Link: https://patch.msgid.link/20251121174021.290120e419e3.I2a5650c9062e29c988992dd8ce0d8eb570d23267@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When changing the interface type, all activity on the interface has
to be stopped first. This was done independent of existing code in
cfg80211_leave(), so didn't handle e.g. background radar detection.
Use cfg80211_leave() to handle it the same way.
Note that cfg80211_leave() behaves slightly differently for IBSS in
wireless extensions, it won't send an event in that case. We could
handle that, but since nl80211 was used to change the type, IBSS is
rare, and wext is already a corner case, it doesn't seem worth it.
Link: https://patch.msgid.link/20251121174021.922ef48ce007.I970c8514252ef8a864a7fbdab9591b71031dee03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
For more details see the Link tag below.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Switch to using system_dfl_wq because system_unbound_wq is going away as part of
a workqueue restructuring.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Link: https://patch.msgid.link/20251113162032.394804-4-marco.crivellari@suse.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement fallback to LPI mode when SP mode is not permitted
by regulatory constraints for INDOOR_SP connections.
Limit fallback mechanism to client mode.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140806.8b43201a34ae.I37fc7bb5892eb9d044d619802e8f2095fde6b296@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move duplicated ap_power type handling code to an inline
function in cfg80211.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140806.959948da1cb5.I893b5168329fb3232f249c182a35c99804112da6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct regulatory request was not fully initialized. While this is not
really a big deal because nl80211_send_reg_change_event doesn't look at
the other fields, it still makes sense to zero all the other fields as
Coverity suggests.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110140230.f8d4fcb1328b.I87170b1caef04356809838e684c9499f5806e624@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The normal timer mechanism assume that timeout further in the future
need a lower accuracy. As an example, the granularity for a timer
scheduled 4096 ms in the future on a 1000 Hz system is already 512 ms.
This granularity is perfectly sufficient for e.g. timeouts, but there
are other types of events that will happen at a future point in time and
require a higher accuracy.
Add a new wiphy_hrtimer_work type that uses an hrtimer internally. The
API is almost identical to the existing wiphy_delayed_work and it can be
used as a drop-in replacement after minor adjustments. The work will be
scheduled relative to the current time with a slack of 1 millisecond.
CC: stable@vger.kernel.org # 6.4+
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251028125710.7f13a2adc5eb.I01b5af0363869864b0580d9c2a1770bafab69566@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In multi-radio wiphy architecture, where a single wiphy can have
multiple radios tied to it, radio specific configuration parameters
and global wiphy parameters are maintained for the entire physical
device and common to all radios. But, each radio in a wiphy can
have different values for each radio configuration parameter like
RTS threshold. With the current debugfs directory structure, the
values of global wiphy configuration parameters can be viewed, but,
values of individual radio configuration parameters cannot be viewed.
To address this requirement, maintain separate entries of each radio
configuration parameter i.e., RTS threshold in corresponding radio-
specific debugfs directory. This way, radio-specific configuration
parameters can be maintained along with global wiphy configuration
parameters. Whenever the values are changed for one radio, the values
for rest of the radios in the wiphy and the global wiphy parameter
value will remain intact.
Sample output:
/# iw phy#0 set rts 100 radio 1
/# iw phy#0 set rts 468 radio 0
/# cat /sys/kernel/debug/ieee80211/phy0/rts_threshold
-1
/# cat /sys/kernel/debug/ieee80211/phy0/radio0/radio_rts_threshold
468
/# cat /sys/kernel/debug/ieee80211/phy0/radio1/radio_rts_threshold
100
/# iw phy#0 set rts 500
/# cat /sys/kernel/debug/ieee80211/phy0/rts_threshold
500
/# cat /sys/kernel/debug/ieee80211/phy0/radio0/radio_rts_threshold
500
/# cat /sys/kernel/debug/ieee80211/phy0/radio1/radio_rts_threshold
500
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20251024044649.483557-3-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In multi-radio wiphy architecture, where a single wiphy can have
multiple radios tied to it, radio specific configuration parameters
and global wiphy parameters are maintained for the entire physical
device and common to all radios. But, each radio in a wiphy can have
different values for each radio configuration parameter, like RTS
threshold. With the current debugfs directory structure, the values
of global wiphy configuration parameters can be viewed, but, values
of individual radio configuration parameters cannot be viewed, as
radio specific configuration parameters are not maintained, separately.
To address this, in addition to maintaining global wiphy configuration
parameters common to all radios, create separate debugfs directories
for each radio in a wiphy to maintain parameters corresponding to that
radio in this directory.
In implementation, maintain a dentry structure in wiphy_radio_cfg, a
structure containing radio configurations of a wiphy. This struct is
maintained to denote per-radio configurations of a wiphy. Create
separate directories representing each radio within phy#X directory in
debugfs during wiphy registration.
Sample directory structure with this change:
ls /sys/kernel/debug/ieee80211/phy0/radio
radio0/ radio1/ radio2/
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20251024044649.483557-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When management frames are passed down to be transmitted by usermode, often
times the NL80211_ATTR_CHANNEL_WIDTH is not used as its implied to be
transmitted on the control width. This can lead to errors during chandef
validation as the offsets from the channel center are wrong. Ensure we
initialise S1G chandefs to a width of 1MHz rather then 20MHz.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20251021061201.235754-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In multi-radio devices, it is possible to have an MLD AP and a monitor
interface active at the same time. In such cases, monitor mode may not
be able to specify a fixed channel and could end up capturing frames
from all radios, including those outside the intended frequency bands.
This patch adds frequency validation for monitor mode. Received frames
are now only processed if their frequency fall within the allowed ranges
of the radios specified by the interface's radio_mask.
This prevents monitor mode from capturing frames outside the supported radio.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/700b8284e845d96654eb98431f8eeb5a81503862.1758647858.git.ryder.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Coverity is unhappy because we may leak old_radio_rts_threshold. Since
this pointer is only valid in the context of the function and kfree is
NULL pointer safe, don't check and just call kfree.
Note that somehow, we were checking old_rts_threshold to free
old_radio_rts_threshold which is a bit odd.
Fixes: 264637941c ("wifi: cfg80211: Add Support to Set RTS Threshold for each Radio")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20251020075745.44168-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These were used by S1G for older chandef representation, but
are no longer needed. Clean them up, even if we can't drop
them from the userspace API entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
