- Fix possible NULL pointer dereference in trace_data_alloc()
On the error path in trace_data_alloc(), it can call trigger_data_free()
with a NULL pointer. This use to be a kfree() but was changed to
trigger_data_free() to clean up any partial initialization. The issue is
that trigger_data_free() does not expect a NULL pointer. Have
trigger_data_free() return safely on NULL pointer.
- Fix multiple events on the command line and bootconfig
If multiple events are enabled on the command line separately and not
grouped, only the last event gets enabled. That is:
trace_event=sched_switch trace_event=sched_waking
Will only enable sched_waking where as:
trace_event=sched_switch,sched_waking
Will enable both.
The bootconfig makes it even worse as the second way is the more common
method.
The issue is that a temporary buffer is used to store the events to enable
later in boot. Each time the cmdline callback is called, it overwrites
what was previously there.
Have the callback append the next value (delimited by a comma) if the
temporary buffer already has content.
- Fix command line trace_buffer_size if >= 2G
The logic to allocate the trace buffer uses "int" for the size parameter
in the command line code causing overflow issues if more that 2G is
specified.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaaxEIRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qn+QAQCM6aJm0ZqDD2dM262M1mQpkU7sW3Dz
hZfBpo3YlH55fQEAklsaD96+yKN7PLl1Vh4c0zCelMHZA7kgck/3GqaFAgA=
=rn/Z
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix possible NULL pointer dereference in trace_data_alloc()
On the trace_data_alloc() error path, it can call trigger_data_free()
with a NULL pointer. This used to be a kfree() but was changed to
trigger_data_free() to clean up any partial initialization. The issue
is that trigger_data_free() does not expect a NULL pointer. Have
trigger_data_free() return safely on NULL pointer.
- Fix multiple events on the command line and bootconfig
If multiple events are enabled on the command line separately and not
grouped, only the last event gets enabled. That is:
trace_event=sched_switch trace_event=sched_waking
will only enable sched_waking whereas:
trace_event=sched_switch,sched_waking
will enable both.
The bootconfig makes it even worse as the second way is the more
common method.
The issue is that a temporary buffer is used to store the events to
enable later in boot. Each time the cmdline callback is called, it
overwrites what was previously there.
Have the callback append the next value (delimited by a comma) if the
temporary buffer already has content.
- Fix command line trace_buffer_size if >= 2G
The logic to allocate the trace buffer uses "int" for the size
parameter in the command line code causing overflow issues if more
that 2G is specified.
* tag 'trace-v7.0-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix trace_buf_size= cmdline parameter with sizes >= 2G
tracing: Fix enabling multiple events on the kernel command line and bootconfig
tracing: Add NULL pointer check to trigger_data_free()
Some of the sizing logic through tracer_alloc_buffers() uses int
internally, causing unexpected behavior if the user passes a value that
does not fit in an int (on my x86 machine, the result is uselessly tiny
buffers).
Fix by plumbing the parameter's real type (unsigned long) through to the
ring buffer allocation functions, which already use unsigned long.
It has always been possible to create larger ring buffers via the sysfs
interface: this only affects the cmdline parameter.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/bff42a4288aada08bdf74da3f5b67a2c28b761f8.1772852067.git.calvin@wbinvd.org
Fixes: 73c5162aa3 ("tracing: keep ring buffer to minimum size till used")
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Multiple events can be enabled on the kernel command line via a comma
separator. But if the are specified one at a time, then only the last
event is enabled. This is because the event names are saved in a temporary
buffer, and each call by the init cmdline code will reset that buffer.
This also affects names in the boot config file, as it may call the
callback multiple times with an example of:
kernel.trace_event = ":mod:rproc_qcom_common", ":mod:qrtr", ":mod:qcom_aoss"
Change the cmdline callback function to append a comma and the next value
if the temporary buffer already has content.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260302-trace-events-allow-multiple-modules-v1-1-ce4436e37fb8@oss.qualcomm.com
Signed-off-by: Andrei-Alexandru Tachici <andrei-alexandru.tachici@oss.qualcomm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20260305193339.2810953-1-linux@roeck-us.net
Fixes: 0550069cc2 ("tracing: Properly process error handling in event_hist_trigger_parse()")
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=NNcQ
-----END PGP SIGNATURE-----
Merge tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Improve quirk visibility and configurability (Maurizio)
- Fix runtime user modification to queue setup (Keith)
- Fix multipath leak on try_module_get failure (Keith)
- Ignore ambiguous spec definitions for better atomics support
(John)
- Fix admin queue leak on controller reset (Ming)
- Fix large allocation in persistent reservation read keys
(Sungwoo Kim)
- Fix fcloop callback handling (Justin)
- Securely free DHCHAP secrets (Daniel)
- Various cleanups and typo fixes (John, Wilfred)
- Avoid a circular lock dependency issue in the sysfs nr_requests or
scheduler store handling
- Fix a circular lock dependency with the pcpu mutex and the queue
freeze lock
- Cleanup for bio_copy_kern(), using __bio_add_page() rather than the
bio_add_page(), as adding a page here cannot fail. The exiting code
had broken cleanup for the error condition, so make it clear that the
error condition cannot happen
- Fix for a __this_cpu_read() in preemptible context splat
* tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: use trylock to avoid lockdep circular dependency in sysfs
nvme: fix memory allocation in nvme_pr_read_keys()
block: use __bio_add_page in bio_copy_kern
block: break pcpu_alloc_mutex dependency on freeze_lock
blktrace: fix __this_cpu_read/write in preemptible context
nvme-multipath: fix leak on try_module_get failure
nvmet-fcloop: Check remoteport port_state before calling done callback
nvme-pci: do not try to add queue maps at runtime
nvme-pci: cap queue creation to used queues
nvme-pci: ensure we're polling a polled queue
nvme: fix memory leak in quirks_param_set()
nvme: correct comment about nvme_ns_remove()
nvme: stop setting namespace gendisk device driver data
nvme: add support for dynamic quirk configuration via module parameter
nvme: fix admin queue leak on controller reset
nvme-fabrics: use kfree_sensitive() for DHCHAP secrets
nvme: stop using AWUPF
nvme: expose active quirks in sysfs
nvme/host: fixup some typos
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://patch.msgid.link/20260227025842.1085206-1-wangqing7171@gmail.com
Fixes: cf9f0f7c4c ("tracing: Allow user-space mapping of the ring-buffer")
Reported-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b5dd2030fe08afdf65d
Tested-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When function trace PID filtering is enabled, the function tracer will
attach a callback to the fork tracepoint as well as the exit tracepoint
that will add the forked child PID to the PID filtering list as well as
remove the PID that is exiting.
Commit a46023d561 ("tracing: Guard __DECLARE_TRACE() use of
__DO_TRACE_CALL() with SRCU-fast") removed the disabling of preemption
when calling tracepoint callbacks.
The callbacks used for the PID filtering accounting depended on preemption
being disabled, and now the trigger a "suspicious RCU usage" warning message.
Make them explicitly disable preemption.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260302213546.156e3e4f@gandalf.local.home
Fixes: a46023d561 ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When multiple syscall events are specified in the kernel command line
(e.g., trace_event=syscalls:sys_enter_openat,syscalls:sys_enter_close),
they are often not captured after boot, even though they appear enabled
in the tracing/set_event file.
The issue stems from how syscall events are initialized. Syscall
tracepoints require the global reference count (sys_tracepoint_refcount)
to transition from 0 to 1 to trigger the registration of the syscall
work (TIF_SYSCALL_TRACEPOINT) for tasks, including the init process (pid 1).
The current implementation of early_enable_events() with disable_first=true
used an interleaved sequence of "Disable A -> Enable A -> Disable B -> Enable B".
If multiple syscalls are enabled, the refcount never drops to zero,
preventing the 0->1 transition that triggers actual registration.
Fix this by splitting early_enable_events() into two distinct phases:
1. Disable all events specified in the buffer.
2. Enable all events specified in the buffer.
This ensures the refcount hits zero before re-enabling, allowing syscall
events to be properly activated during early boot.
The code is also refactored to use a helper function to avoid logic
duplication between the disable and enable phases.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260224023544.1250787-1-hehuiwen@kylinos.cn
Fixes: ce1039bd3a ("tracing: Fix enabling of syscall events on the command line")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
trace_graph_thresh_return() called handle_nosleeptime() and then delegated
to trace_graph_return(), which calls handle_nosleeptime() again. When
sleep-time accounting is disabled this double-adjusts calltime and can
produce bogus durations (including underflow).
Fix this by computing rettime once, applying handle_nosleeptime() only
once, using the adjusted calltime for threshold comparison, and writing
the return event directly via __trace_graph_return() when the threshold is
met.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113314048jE4VRwIyZEALiYByGK0My@zte.com.cn
Fixes: 3c9880f3ab ("ftrace: Use a running sleeptime instead of saving on shadow stack")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When tracing_thresh is enabled, function graph tracing uses
trace_graph_thresh_return() as the return handler. Unlike
trace_graph_return(), it did not clear the per-task TRACE_GRAPH_NOTRACE
flag set by the entry handler for set_graph_notrace addresses. This could
leave the task permanently in "notrace" state and effectively disable
function graph tracing for that task.
Mirror trace_graph_return()'s per-task notrace handling by clearing
TRACE_GRAPH_NOTRACE and returning early when set.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113007819YgrZsMGABff4Rc-O_fZxL@zte.com.cn
Fixes: b84214890a ("function_graph: Move graph notrace bit to shadow stack global var")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
- Fix possible dereference of uninitialized pointer
When validating the persistent ring buffer on boot up, if the first
validation fails, a reference to "head_page" is performed in the
error path, but it skips over the initialization of that variable.
Move the initialization before the first validation check.
- Fix use of event length in validation of persistent ring buffer
On boot up, the persistent ring buffer is checked to see if it is
valid by several methods. One being to walk all the events in the
memory location to make sure they are all valid. The length of the
event is used to move to the next event. This length is determined
by the data in the buffer. If that length is corrupted, it could
possibly make the next event to check located at a bad memory location.
Validate the length field of the event when doing the event walk.
- Fix function graph on archs that do not support use of ftrace_ops
When an architecture defines HAVE_DYNAMIC_FTRACE_WITH_ARGS, it means
that its function graph tracer uses the ftrace_ops of the function
tracer to call its callbacks. This allows a single registered callback
to be called directly instead of checking the callback's meta data's
hash entries against the function being traced.
For architectures that do not support this feature, it must always
call the loop function that tests each registered callback (even if
there's only one). The loop function tests each callback's meta data
against its hash of functions and will call its callback if the
function being traced is in its hash map.
The issue was that there was no check against this and the direct
function was being called even if the architecture didn't support it.
This meant that if function tracing was enabled at the same time
as a callback was registered with the function graph tracer, its
callback would be called for every function that the function tracer
also traced, even if the callback's meta data only wanted to be
called back for a small subset of functions.
Prevent the direct calling for those architectures that do not support
it.
- Fix references to trace_event_file for hist files
The hist files used event_file_data() to get a reference to the
associated trace_event_file the histogram was attached to. This
would return a pointer even if the trace_event_file is about to
be freed (via RCU). Instead it should use the event_file_file()
helper that returns NULL if the trace_event_file is marked to be
freed so that no new references are added to it.
- Wake up hist poll readers when an event is being freed
When polling on a hist file, the task is only awoken when a hist
trigger is triggered. This means that if an event is being freed
while there's a task waiting on its hist file, it will need to wait
until the hist trigger occurs to wake it up and allow the freeing
to happen. Note, the event will not be completely freed until all
references are removed, and a hist poller keeps a reference. But
it should still be woken when the event is being freed.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaZd4ExQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqX5AP4powfnNnRfLSKH9idhTp+ltmJ+9roy
L7kWTr/z20S2VQEAk331PNZ32uZu+/ZUETYpgtEx4SbRGZFehTBv1ddjfw4=
=TWj5
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix possible dereference of uninitialized pointer
When validating the persistent ring buffer on boot up, if the first
validation fails, a reference to "head_page" is performed in the
error path, but it skips over the initialization of that variable.
Move the initialization before the first validation check.
- Fix use of event length in validation of persistent ring buffer
On boot up, the persistent ring buffer is checked to see if it is
valid by several methods. One being to walk all the events in the
memory location to make sure they are all valid. The length of the
event is used to move to the next event. This length is determined by
the data in the buffer. If that length is corrupted, it could
possibly make the next event to check located at a bad memory
location.
Validate the length field of the event when doing the event walk.
- Fix function graph on archs that do not support use of ftrace_ops
When an architecture defines HAVE_DYNAMIC_FTRACE_WITH_ARGS, it means
that its function graph tracer uses the ftrace_ops of the function
tracer to call its callbacks. This allows a single registered
callback to be called directly instead of checking the callback's
meta data's hash entries against the function being traced.
For architectures that do not support this feature, it must always
call the loop function that tests each registered callback (even if
there's only one). The loop function tests each callback's meta data
against its hash of functions and will call its callback if the
function being traced is in its hash map.
The issue was that there was no check against this and the direct
function was being called even if the architecture didn't support it.
This meant that if function tracing was enabled at the same time as a
callback was registered with the function graph tracer, its callback
would be called for every function that the function tracer also
traced, even if the callback's meta data only wanted to be called
back for a small subset of functions.
Prevent the direct calling for those architectures that do not
support it.
- Fix references to trace_event_file for hist files
The hist files used event_file_data() to get a reference to the
associated trace_event_file the histogram was attached to. This would
return a pointer even if the trace_event_file is about to be freed
(via RCU). Instead it should use the event_file_file() helper that
returns NULL if the trace_event_file is marked to be freed so that no
new references are added to it.
- Wake up hist poll readers when an event is being freed
When polling on a hist file, the task is only awoken when a hist
trigger is triggered. This means that if an event is being freed
while there's a task waiting on its hist file, it will need to wait
until the hist trigger occurs to wake it up and allow the freeing to
happen. Note, the event will not be completely freed until all
references are removed, and a hist poller keeps a reference. But it
should still be woken when the event is being freed.
* tag 'trace-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Wake up poll waiters for hist files when removing an event
tracing: Fix checking of freed trace_event_file for hist files
fgraph: Do not call handlers direct when not using ftrace_ops
tracing: ring-buffer: Fix to check event length before using
ring-buffer: Fix possible dereference of uninitialized pointer
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbe ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The event_hist_open() and event_hist_poll() functions currently retrieve
a trace_event_file pointer from a file struct by invoking
event_file_data(), which simply returns file->f_inode->i_private. The
functions then check if the pointer is NULL to determine whether the event
is still valid. This approach is flawed because i_private is assigned when
an eventfs inode is allocated and remains set throughout its lifetime.
Instead, the code should call event_file_file(), which checks for
EVENT_FILE_FL_FREED. Using the incorrect access function may result in the
code potentially opening a hist file for an event that is being removed or
becoming stuck while polling on this file.
Correct the access method to event_file_file() in both functions.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-2-petr.pavlu@suse.com
Fixes: 1bd13edbbe ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes: cc60ee813b ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Link: https://patch.msgid.link/177123421541.142205.9414352170164678966.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260213100130.2013839-1-d.dulov@aladdin.ru
Closes: https://lore.kernel.org/r/202406130130.JtTGRf7W-lkp@intel.com/
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=PVoY
-----END PGP SIGNATURE-----
Merge tag 'block-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull more block updates from Jens Axboe:
- Fix partial IOVA mapping cleanup in error handling
- Minor prep series ignoring discard return value, as
the inline value is always known
- Ensure BLK_FEAT_STABLE_WRITES is set for drbd
- Fix leak of folio in bio_iov_iter_bounce_read()
- Allow IOC_PR_READ_* for read-only open
- Another debugfs deadlock fix
- A few doc updates
* tag 'block-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq: use NOIO context to prevent deadlock during debugfs creation
blk-stat: convert struct blk_stat_callback to kernel-doc
block: fix enum descriptions kernel-doc
block: update docs for bio and bvec_iter
block: change return type to void
nvmet: ignore discard return value
md: ignore discard return value
block: fix partial IOVA mapping cleanup in blk_rq_dma_map_iova
block: fix folio leak in bio_iov_iter_bounce_read()
block: allow IOC_PR_READ_* ioctls with BLK_OPEN_READ
drbd: always set BLK_FEAT_STABLE_WRITES
Creating debugfs entries can trigger fs reclaim, which can enter back
into the block layer request_queue. This can cause deadlock if the
queue is frozen.
Previously, a WARN_ON_ONCE check was used in debugfs_create_files()
to detect this condition, but it was racy since the queue can be frozen
from another context at any time.
Introduce blk_debugfs_lock()/blk_debugfs_unlock() helpers that combine
the debugfs_mutex with memalloc_noio_save()/restore() to prevent fs
reclaim from triggering block I/O. Also add blk_debugfs_lock_nomemsave()
and blk_debugfs_unlock_nomemrestore() variants for callers that don't
need NOIO protection (e.g., debugfs removal or read-only operations).
Replace all raw debugfs_mutex lock/unlock pairs with these helpers,
using the _nomemsave/_nomemrestore variants where appropriate.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs9gNKEYAPagD9JADfO5UH+OiCr4P7OO2wjpfOYeM-RV=A@mail.gmail.com/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/all/aYWQR7CtYdk3K39g@shinmob/
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- kprobes: Use a dedicated kernel thread to optimize the kprobes
instead of using workqueue thread. Since the kprobe optimizer waits
a long time for synchronize_rcu_task(), it can block other workers
in the same queue if it uses a workqueue.
- kprobe-events: Returns immediately if no new probe events are
specified on the kernel command line at boot time. This shorten the
kernel boot time.
- kprobes: When a kprobe is fully removed from the kernel code,
retry optimizing another kprobe which is blocked by that kprobe.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmmPtX4bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bgoUH/0oZ9/c+wkn9AKxFlOAw
AIbtTfKiQHXPirhamYuEbJJWTUH2O/Wr0SQrIkbwJzToou5CRTuT5UQBpmOk2GKZ
uZ5bO63nOMn/1ECbDpc+lFGV5J4Dn5Pw2GFjUTR6EPwms+CN/d6f2LlvuAVfJX7Y
klL2X9/QLwV5QT8La5zNEka2zBfrZlZ9a5DGoLtgdwX2zosuef9aDnisS2jkLenH
wugZLryx0Qvlj9DXimP7oVZpYDHr0hZEI3CNQPge0gMQDj1XajGawYfkhrfaeFMX
4eXjFCN+NQG6fBUpDugcOThOypWmjlJhoYxxROJu0eFcLQjsuWjp6jLixI9Nr7P+
tQk=
=syAj
-----END PGP SIGNATURE-----
Merge tag 'probes-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobes updates from Masami Hiramatsu:
- Use a dedicated kernel thread to optimize the kprobes instead of
using workqueue thread. Since the kprobe optimizer waits a long time
for synchronize_rcu_task(), it can block other workers in the same
queue if it uses a workqueue.
- kprobe-events: return immediately if no new probe events are
specified on the kernel command line at boot time. This shortens
the kernel boot time.
- When a kprobe is fully removed from the kernel code, retry optimizing
another kprobe which is blocked by that kprobe.
* tag 'probes-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Use dedicated kthread for kprobe optimizer
tracing: kprobe-event: Return directly when trace kprobes is empty
kprobes: retry blocked optprobe in do_free_cleaned_kprobes
User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To differentiate
that code from the C code, add entries in for the RUST version (with "[RUST]"
around it) so that the right maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active filters
enabled in the trace instance, the file show_event_filters will list them
so that there's only one file that needs to be examined to see if any
filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active triggers
enabled in the trace instance, the file show_event_triggers will list them
so that there's only one file that needs to be examined to see if any
triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace instances
instead of the top level instance. But if traceoff_on_warning triggers, it
doesn't stop the buffer with trace_printk() and that data can easily be
lost by being overwritten. Have traceoff_on_warning also disable the
instance that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file exists for
every event. This displays the internal data of any histogram enabled for
that event. But it is lacking the function that is called to process one
of its fields. This is very useful information that was missing when
debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently the size
of the stack that is stored is limited to just 16 entries. But the storage
space in the histogram is 256 bytes, meaning that it can store up to 31
entries (plus one for the count of entries). Instead of letting that space
go to waste, up the limit from 16 to 31. This makes the keys much more
useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only in a
previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring buffer
if it contains data from a previous boot. It is cleared when recording
starts again, but it is not cleared when the buffer is reset. The data is
useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some updates to
the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because it
expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run completely on
the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event happens,
an irq work is triggered to wake up that waiter. This is noisy on isolated
CPUs (running NO_HZ_FULL). Trigger an IPI to a house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into their
numbers in the trace event format files. This work queue can also be used
for other aspects of tracing that takes some time and shouldn't be called
by the init call code.
The blk_trace initialization takes a bit of time. Have the initialization
code moved to the new tracing generic work queue function.
- Skip kprobe boot event creation call if there's no kprobes defined on cmdline
The kprobe initialization to set up kprobes if they are defined on the
cmdline requires taking the event_mutex lock. This can be held by other
tracing code doing initialization for a long time. Since kprobes added to
the kernel command line need to be setup immediately, as they may be
tracing early initialization code, they cannot be postponed in a work
queue and must be setup in the initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to take the
mutex and slow down the boot up code waiting to get the lock only to find
out there's nothing to do. Simply exit out early if there's no kprobes on
the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about tracing
over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more difficult to
maintain. Start splitting it up so that related code is in their own
files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of the main
buffer and gets swapped with it when a new high latency is detected. This
keeps the trace up to the highest latency around where this max_latency
buffer is never written to. It is only used to save the last max latency
trace.
A while ago a snapshot feature was added to tracefs to allow user space to
perform the same logic. It could also enable events to trigger a
"snapshot" if one of their fields hit a new high. This was built on top of
the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency tracers
to be enabled. In reality, the latency tracers depend on the snapshot code
and not the other way around. It was just that they came first.
Restructure the code and the kconfigs to have the latency tracers depend
on snapshot code instead. This actually simplifies the logic a bit and
allows to disable more when the latency tracers are not defined and the
snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable that could
be changed by user space for each sample. If the user change this
variable, it could cause a bus contention, and reading that variable can
show up as a large latency in the trace causing a false positive. Read
this variable at the start of the sample with a READ_ONCE() into a local
variable and keep the code from sharing cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses a
static branch to call that tracer directly. When another tracer is added,
it goes into loop logic to call all the registered callbacks.
The code was incorrect when going back to one tracer and never re-enabled
the static branch again to do the optimization code.
- And other small fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaY9P3BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qou3AQCCrzdrIglLNABGPyny9sqWLDz6vyyw
nWAK9xg1VFxwRQD+LyJvVMWbpGeRBS/PsAK19RgldbgkQFWNv8gNhRKRgw0=
=U/kg
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To
differentiate that code from the C code, add entries in for the
RUST version (with "[RUST]" around it) so that the right
maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active
filters enabled in the trace instance, the file show_event_filters
will list them so that there's only one file that needs to be
examined to see if any filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active
triggers enabled in the trace instance, the file
show_event_triggers will list them so that there's only one file
that needs to be examined to see if any triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace
instances instead of the top level instance. But if
traceoff_on_warning triggers, it doesn't stop the buffer with
trace_printk() and that data can easily be lost by being
overwritten. Have traceoff_on_warning also disable the instance
that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file
exists for every event. This displays the internal data of any
histogram enabled for that event. But it is lacking the function
that is called to process one of its fields. This is very useful
information that was missing when debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently
the size of the stack that is stored is limited to just 16 entries.
But the storage space in the histogram is 256 bytes, meaning that
it can store up to 31 entries (plus one for the count of entries).
Instead of letting that space go to waste, up the limit from 16 to
31. This makes the keys much more useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only
in a previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring
buffer if it contains data from a previous boot. It is cleared when
recording starts again, but it is not cleared when the buffer is
reset. The data is useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some
updates to the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because
it expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run
completely on the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event
happens, an irq work is triggered to wake up that waiter. This is
noisy on isolated CPUs (running NO_HZ_FULL). Trigger an IPI to a
house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after
it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into
their numbers in the trace event format files. This work queue can
also be used for other aspects of tracing that takes some time and
shouldn't be called by the init call code.
The blk_trace initialization takes a bit of time. Have the
initialization code moved to the new tracing generic work queue
function.
- Skip kprobe boot event creation call if there's no kprobes defined
on cmdline
The kprobe initialization to set up kprobes if they are defined on
the cmdline requires taking the event_mutex lock. This can be held
by other tracing code doing initialization for a long time. Since
kprobes added to the kernel command line need to be setup
immediately, as they may be tracing early initialization code, they
cannot be postponed in a work queue and must be setup in the
initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to
take the mutex and slow down the boot up code waiting to get the
lock only to find out there's nothing to do. Simply exit out early
if there's no kprobes on the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about
tracing over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more
difficult to maintain. Start splitting it up so that related code
is in their own files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of
the main buffer and gets swapped with it when a new high latency is
detected. This keeps the trace up to the highest latency around
where this max_latency buffer is never written to. It is only used
to save the last max latency trace.
A while ago a snapshot feature was added to tracefs to allow user
space to perform the same logic. It could also enable events to
trigger a "snapshot" if one of their fields hit a new high. This
was built on top of the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency
tracers to be enabled. In reality, the latency tracers depend on
the snapshot code and not the other way around. It was just that
they came first.
Restructure the code and the kconfigs to have the latency tracers
depend on snapshot code instead. This actually simplifies the logic
a bit and allows to disable more when the latency tracers are not
defined and the snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable
that could be changed by user space for each sample. If the user
change this variable, it could cause a bus contention, and reading
that variable can show up as a large latency in the trace causing a
false positive. Read this variable at the start of the sample with
a READ_ONCE() into a local variable and keep the code from sharing
cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses
a static branch to call that tracer directly. When another tracer
is added, it goes into loop logic to call all the registered
callbacks.
The code was incorrect when going back to one tracer and never
re-enabled the static branch again to do the optimization code.
- And other small fixes and cleanups"
* tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (46 commits)
function_graph: Restore direct mode when callbacks drop to one
tracing: Fix indentation of return statement in print_trace_fmt()
tracing: Reset last_boot_info if ring buffer is reset
tracing: Fix to set write permission to per-cpu buffer_size_kb
tracing: Fix false sharing in hwlat get_sample()
tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection
tracing: Better separate SNAPSHOT and MAX_TRACE options
tracing: Add tracer_uses_snapshot() helper to remove #ifdefs
tracing: Rename trace_array field max_buffer to snapshot_buffer
tracing: Move pid filtering into trace_pid.c
tracing: Move trace_printk functions out of trace.c and into trace_printk.c
tracing: Use system_state in trace_printk_init_buffers()
tracing: Have trace_printk functions use flags instead of using global_trace
tracing: Make tracing_update_buffers() take NULL for global_trace
tracing: Make printk_trace global for tracing system
tracing: Move ftrace_trace_stack() out of trace.c and into trace.h
tracing: Move __trace_buffer_{un}lock_*() functions to trace.h
tracing: Make tracing_selftest_running global to the tracing subsystem
tracing: Make tracing_disabled global for tracing system
tracing: Clean up use of trace_create_maxlat_file()
...
When registering a second fgraph callback, direct path is disabled and
array loop is used instead. When ftrace_graph_active falls back to one,
we try to re-enable direct mode via ftrace_graph_enable_direct(true, ...).
But ftrace_graph_enable_direct() incorrectly disables the static key
rather than enabling it. This leaves fgraph_do_direct permanently off
after first multi-callback transition, so direct fast mode is never
restored.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260213142932519cuWSpEXeS4-UnCvNXnK2P@zte.com.cn
Fixes: cc60ee813b ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Refactor da_monitor to minimise macros
Complete refactor of da_monitor.h to reduce reliance on macros
generating functions. Use generic static functions and uses the
preprocessor only when strictly necessary (e.g. for tracepoint
handlers).
The change essentially relies on functions with generic names (e.g.
da_handle) instead of monitor-specific as well adding the need to
define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including the
header rather than calling macros that would define functions.
Also adapt monitors and documentation accordingly.
- Cleanup DA code generation scripts
Clean up functions in dot2c removing reimplementations of trivial
library functions (__buff_to_string) and removing some other unused
intermediate steps.
- Annotate functions with types in the rvgen python scripts
- Remove superfluous assignments and cleanup generated code
The rvgen scripts generate a superfluous assignment to 0 for enum
variables and don't add commas to the last elements, which is against
the kernel coding standards. Change the generation process for a
better compliance and slightly simpler logic.
- Remove superfluous declarations from generated code
The monitor container source files contained a declaration and a
definition for the rv_monitor variable. The former is superfluous and
was removed.
- Fix reference to outdated documentation
s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in
da_monitor.h
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaY3j9xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qup5AP0afGb2gr+SOIOu0dIAXjGLg3cbz0C4
J4bDx6H0cdgXywD+Maassm0nKIgDnOBLwtuwL0kEUAxllqn7RCZ2+ARwbAU=
=dfCl
-----END PGP SIGNATURE-----
Merge tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier updates from Steven Rostedt:
- Refactor da_monitor to minimize macros
Complete refactor of da_monitor.h to reduce reliance on macros
generating functions. Use generic static functions and uses the
preprocessor only when strictly necessary (e.g. for tracepoint
handlers).
The change essentially relies on functions with generic names (e.g.
da_handle) instead of monitor-specific as well adding the need to
define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including
the header rather than calling macros that would define functions.
Also adapt monitors and documentation accordingly.
- Cleanup DA code generation scripts
Clean up functions in dot2c removing reimplementations of trivial
library functions (__buff_to_string) and removing some other unused
intermediate steps.
- Annotate functions with types in the rvgen python scripts
- Remove superfluous assignments and cleanup generated code
The rvgen scripts generate a superfluous assignment to 0 for enum
variables and don't add commas to the last elements, which is against
the kernel coding standards. Change the generation process for a
better compliance and slightly simpler logic.
- Remove superfluous declarations from generated code
The monitor container source files contained a declaration and a
definition for the rv_monitor variable. The former is superfluous and
was removed.
- Fix reference to outdated documentation
s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in
da_monitor.h
* tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix documentation reference in da_monitor.h
verification/rvgen: Remove unused variable declaration from containers
verification/dot2c: Remove superfluous enum assignment and add last comma
verification/dot2c: Remove __buff_to_string() and cleanup
verification/rvgen: Annotate DA functions with types
verification/rvgen: Adapt dot2k and templates after refactoring da_monitor.h
Documentation/rv: Adapt documentation after da_monitor refactoring
rv: Cleanup da_monitor after refactor
rv: Refactor da_monitor to minimise macros
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
The return statement inside the nested if block in print_trace_fmt()
is not properly indented, making the code structure unclear. This was
flagged by smatch as a warning.
Add proper indentation to the return statement to match the kernel
coding style and improve readability.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260210153903.8041-1-tttturtleruss@gmail.com
Signed-off-by: Haoyang LIU <tttturtleruss@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit 32dc004252 ("tracing: Reset last-boot buffers when reading
out all cpu buffers") resets the last_boot_info when user read out
all data via trace_pipe* files. But it is not reset when user
resets the buffer from other files. (e.g. write `trace` file)
Reset it when the corresponding ring buffer is reset too.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177071302364.2293046.17895165659153977720.stgit@mhiramat.tok.corp.google.com
Fixes: 32dc004252 ("tracing: Reset last-boot buffers when reading out all cpu buffers")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the per-cpu buffer_size_kb file is writable for changing
per-cpu ring buffer size, the file should have the write access
permission.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177071301597.2293046.11683339475076917920.stgit@mhiramat.tok.corp.google.com
Fixes: 21ccc9cd72 ("tracing: Disable "other" permission bits in the tracefs files")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=cBdK
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support associating BPF program with struct_ops (Amery Hung)
- Switch BPF local storage to rqspinlock and remove recursion detection
counters which were causing false positives (Amery Hung)
- Fix live registers marking for indirect jumps (Anton Protopopov)
- Introduce execution context detection BPF helpers (Changwoo Min)
- Improve verifier precision for 32bit sign extension pattern
(Cupertino Miranda)
- Optimize BTF type lookup by sorting vmlinux BTF and doing binary
search (Donglin Peng)
- Allow states pruning for misc/invalid slots in iterator loops (Eduard
Zingerman)
- In preparation for ASAN support in BPF arenas teach libbpf to move
global BPF variables to the end of the region and enable arena kfuncs
while holding locks (Emil Tsalapatis)
- Introduce support for implicit arguments in kfuncs and migrate a
number of them to new API. This is a prerequisite for cgroup
sub-schedulers in sched-ext (Ihor Solodrai)
- Fix incorrect copied_seq calculation in sockmap (Jiayuan Chen)
- Fix ORC stack unwind from kprobe_multi (Jiri Olsa)
- Speed up fentry attach by using single ftrace direct ops in BPF
trampolines (Jiri Olsa)
- Require frozen map for calculating map hash (KP Singh)
- Fix lock entry creation in TAS fallback in rqspinlock (Kumar
Kartikeya Dwivedi)
- Allow user space to select cpu in lookup/update operations on per-cpu
array and hash maps (Leon Hwang)
- Make kfuncs return trusted pointers by default (Matt Bobrowski)
- Introduce "fsession" support where single BPF program is executed
upon entry and exit from traced kernel function (Menglong Dong)
- Allow bpf_timer and bpf_wq use in all programs types (Mykyta
Yatsenko, Andrii Nakryiko, Kumar Kartikeya Dwivedi, Alexei
Starovoitov)
- Make KF_TRUSTED_ARGS the default for all kfuncs and clean up their
definition across the tree (Puranjay Mohan)
- Allow BPF arena calls from non-sleepable context (Puranjay Mohan)
- Improve register id comparison logic in the verifier and extend
linked registers with negative offsets (Puranjay Mohan)
- In preparation for BPF-OOM introduce kfuncs to access memcg events
(Roman Gushchin)
- Use CFI compatible destructor kfunc type (Sami Tolvanen)
- Add bitwise tracking for BPF_END in the verifier (Tianci Cao)
- Add range tracking for BPF_DIV and BPF_MOD in the verifier (Yazhou
Tang)
- Make BPF selftests work with 64k page size (Yonghong Song)
* tag 'bpf-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (268 commits)
selftests/bpf: Fix outdated test on storage->smap
selftests/bpf: Choose another percpu variable in bpf for btf_dump test
selftests/bpf: Remove test_task_storage_map_stress_lookup
selftests/bpf: Update task_local_storage/task_storage_nodeadlock test
selftests/bpf: Update task_local_storage/recursion test
selftests/bpf: Update sk_storage_omem_uncharge test
bpf: Switch to bpf_selem_unlink_nofail in bpf_local_storage_{map_free, destroy}
bpf: Support lockless unlink when freeing map or local storage
bpf: Prepare for bpf_selem_unlink_nofail()
bpf: Remove unused percpu counter from bpf_local_storage_map_free
bpf: Remove cgroup local storage percpu counter
bpf: Remove task local storage percpu counter
bpf: Change local_storage->lock and b->lock to rqspinlock
bpf: Convert bpf_selem_unlink to failable
bpf: Convert bpf_selem_link_map to failable
bpf: Convert bpf_selem_unlink_map to failable
bpf: Select bpf_local_storage_map_bucket based on bpf_local_storage
selftests/xsk: fix number of Tx frags in invalid packet
selftests/xsk: properly handle batch ending in the middle of a packet
bpf: Prevent reentrance into call_rcu_tasks_trace()
...
The get_sample() function in the hwlat tracer assumes the caller holds
hwlat_data.lock, but this is not actually happening. The result is
unprotected data access to hwlat_data, and in per-cpu mode can result in
false sharing which may show up as false positive latency events.
The specific case of false sharing observed was primarily between
hwlat_data.sample_width and hwlat_data.count. These are separated by
just 8B and are therefore likely to share a cache line. When one thread
modifies count, the cache line is in a modified state so when other
threads read sample_width in the main latency detection loop, they fetch
the modified cache line. On some systems, the fetch itself may be slow
enough to count as a latency event, which could set up a self
reinforcing cycle of latency events as each event increments count which
then causes more latency events, continuing the cycle.
The other result of the unprotected data access is that hwlat_data.count
can end up with duplicate or missed values, which was observed on some
systems in testing.
Convert hwlat_data.count to atomic64_t so it can be safely modified
without locking, and prevent false sharing by pulling sample_width into
a local variable.
One system this was tested on was a dual socket server with 32 CPUs on
each numa node. With settings of 1us threshold, 1000us width, and
2000us window, this change reduced the number of latency events from
500 per second down to approximately 1 event per minute. Some machines
tested did not exhibit measurable latency from the false sharing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260210074810.6328-1-clord@mykolab.com
Signed-off-by: Colin Lord <clord@mykolab.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----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=jNzW
-----END PGP SIGNATURE-----
Merge tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Support for batch request processing for ublk, improving the
efficiency of the kernel/ublk server communication. This can yield
nice 7-12% performance improvements
- Support for integrity data for ublk
- Various other ublk improvements and additions, including a ton of
selftests additions and updated
- Move the handling of blk-crypto software fallback from below the
block layer to above it. This reduces the complexity of dealing with
bio splitting
- Series fixing a number of potential deadlocks in blk-mq related to
the queue usage counter and writeback throttling and rq-qos debugfs
handling
- Add an async_depth queue attribute, to resolve a performance
regression that's been around for a qhilw related to the scheduler
depth handling
- Only use task_work for IOPOLL completions on NVMe, if it is necessary
to do so. An earlier fix for an issue resulted in all these
completions being punted to task_work, to guarantee that completions
were only run for a given io_uring ring when it was local to that
ring. With the new changes, we can detect if it's necessary to use
task_work or not, and avoid it if possible.
- rnbd fixes:
- Fix refcount underflow in device unmap path
- Handle PREFLUSH and NOUNMAP flags properly in protocol
- Fix server-side bi_size for special IOs
- Zero response buffer before use
- Fix trace format for flags
- Add .release to rnbd_dev_ktype
- MD pull requests via Yu Kuai
- Fix raid5_run() to return error when log_init() fails
- Fix IO hang with degraded array with llbitmap
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
- Fix GPF in write_page caused by resize race
- Fix NULL pointer dereference in process_metadata_update
- Fix hang when stopping arrays with metadata through dm-raid
- Fix any_working flag handling in raid10_sync_request
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field
- Consolidate mddev boolean fields into mddev_flags
- Use mempool to allocate stripe_request_ctx and make sure
max_sectors is not less than io_opt in raid5
- Fix return value of mddev_trylock
- Fix memory leak in raid1_run()
- Add Li Nan as mdraid reviewer
- Move phys_vec definitions to the kernel types, mostly in preparation
for some VFIO and RDMA changes
- Improve the speed for secure erase for some devices
- Various little rust updates
- Various other minor fixes, improvements, and cleanups
* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
blk-mq: ABI/sysfs-block: fix docs build warnings
selftests: ublk: organize test directories by test ID
block: decouple secure erase size limit from discard size limit
block: remove redundant kill_bdev() call in set_blocksize()
blk-mq: add documentation for new queue attribute async_dpeth
block, bfq: convert to use request_queue->async_depth
mq-deadline: covert to use request_queue->async_depth
kyber: covert to use request_queue->async_depth
blk-mq: add a new queue sysfs attribute async_depth
blk-mq: factor out a helper blk_mq_limit_depth()
blk-mq-sched: unify elevators checking for async requests
block: convert nr_requests to unsigned int
block: don't use strcpy to copy blockdev name
blk-mq-debugfs: warn about possible deadlock
blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
blk-rq-qos: fix possible debugfs_mutex deadlock
blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
...
The tracing_max_latency shouldn't be limited if CONFIG_FSNOTIFY is defined
or not and it was moved out of that protection to be always available with
CONFIG_TRACER_MAX_TRACE. All was moved out except the dentry descriptor
for it (d_max_latency) and it failed to build on some configs.
Move that out of the CONFIG_FSNOTIFY protection too.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260209194631.788bfc85@fedora
Fixes: ba73713da5 ("tracing: Clean up use of trace_create_maxlat_file()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602092133.fTdojd95-lkp@intel.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The latency tracers (scheduler, irqsoff, etc) were created when tracing
was first added. These tracers required a "snapshot" buffer that was the
same size as the ring buffer being written to. When a new max latency was
hit, the main ring buffer would swap with the snapshot buffer so that the
trace leading up to the latency would be saved in the snapshot buffer (The
snapshot buffer is never written to directly and the data within it can be
viewed without fear of being overwritten).
Later, a new feature was added to allow snapshots to be taken by user
space or even event triggers. This created a "snapshot" file that allowed
users to trigger a snapshot from user space to save the current trace.
The config for this new feature (CONFIG_TRACER_SNAPSHOT) would select the
latency tracer config (CONFIG_TRACER_MAX_LATENCY) as it would need all the
functionality from it as it already existed. But this was incorrect. As
the snapshot feature is really what the latency tracers need and not the
other way around.
Have CONFIG_TRACER_MAX_TRACE select CONFIG_TRACER_SNAPSHOT where the
tracers that needs the max latency buffer selects the TRACE_MAX_TRACE
which will then select TRACER_SNAPSHOT.
Also, go through trace.c and trace.h and make the code that only needs the
TRACER_MAX_TRACE protected by that and the code that always requires the
snapshot to be protected by TRACER_SNAPSHOT.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208183856.767870992@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of having #ifdef CONFIG_TRACER_MAX_TRACE around every access to
the struct tracer's use_max_tr field, add a helper function for that
access and if CONFIG_TRACER_MAX_TRACE is not configured it just returns
false.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208183856.599390238@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When tracing was first added, there were latency tracers that would take a
snapshot of the current trace when a new max latency was hit. This
snapshot buffer was called "max_buffer". Since then, a snapshot feature
was added that allowed user space or event triggers to trigger a snapshot
of the current buffer using the same max_buffer of the trace_array.
As this snapshot buffer now has a more generic use case, calling it
"max_buffer" is confusing. Rename it to snapshot_buffer.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208183856.428446729@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace.c file was a dumping ground for most tracing code. Start
organizing it better by moving various functions out into their own files.
Move the PID filtering functions from trace.c into its own trace_pid.c
file.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.998330662@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The file trace.c has become a catchall for most things tracing. Start
making it smaller by breaking out various aspects into their own files.
Move the functions associated to the trace_printk operations out of trace.c and
into trace_printk.c.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.828744197@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function trace_printk_init_buffers() is used to expand tha
trace_printk buffers when trace_printk() is used within the kernel or in
modules. On kernel boot up, it holds off from starting the sched switch
cmdline recorder, but will start it immediately when it is added by a
module.
Currently it uses a trick to see if the global_trace buffer has been
allocated or not to know if it was called by module load or not. But this
is more of a hack, and can not be used when this code is moved out of
trace.c. Instead simply look at the system_state and if it is running then
it is know that it could only be called by module load.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.660237094@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace.c file has become a dumping ground for all tracing code and has
become quite large. In order to move the trace_printk functions out of it
these functions can not access global_trace directly, as that is something
that needs to stay static in trace.c.
Instead of testing the trace_array tr pointer to &global_trace, test the
tr->flags to see if TRACE_ARRAY_FL_GLOBAL set.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.491116245@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace.c file has become a dumping ground for all tracing code and has
become quite large. In order to move the trace_printk functions out of it
these functions can not access global_trace directly, as that is something
that needs to stay static in trace.c.
Have tracing_update_buffers() take NULL for its trace_array to denote it
should work on the global_trace top level trace_array allows that function
to be used outside of trace.c and still update the global_trace
trace_array.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.318864210@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The printk_trace is used to determine which trace_array trace_printk()
writes to. By making it a global variable among the tracing subsystem it
will allow the trace_printk functions to be moved out of trace.c and still
have direct access to that variable.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.144525891@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The file trace.c has become a catchall for most things tracing. Start
making it smaller by breaking out various aspects into their own files.
Make ftrace_trace_stack() into a static inline that tests if stack tracing
is enabled and if so to call __ftrace_trace_stack() to do the stack trace.
This keeps the test inlined in the fast paths and only does the function
call if stack tracing is enabled.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.974218132@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
