Make sure that __perf_event_overflow() runs with IRQs disabled for all
possible callchains. Specifically the software events can end up running
it with only preemption disabled.
This opens up a race vs perf_event_exit_event() and friends that will go
and free various things the overflow path expects to be present, like
the BPF program.
Fixes: 592903cdcb ("perf_counter: add an event_list")
Reported-by: Simond Hu <cmdhh1767@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Simond Hu <cmdhh1767@gmail.com>
Link: https://patch.msgid.link/20260224122909.GV1395416@noisy.programming.kicks-ass.net
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer.
Closes: https://lore.kernel.org/oe-kbuild-all/202602020208.m7KIjdzW-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Haocheng Yu <yuhaocheng035@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260202162057.7237-1-yuhaocheng035@gmail.com
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470
Fixes: f4b07fd62d ("perf/core: Use POLLHUP for a pinned event in error")
Closes: https://lore.kernel.org/lkml/aD2w50VDvGIH95Pf@ly-workstation
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Link: https://patch.msgid.link/20250603045105.1731451-1-namhyung@kernel.org
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs.
Compared to previous iterations of the Intel PMU code, there's
been a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to
replace the Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
(Dapeng Mi)
- Likewise, a large series adds uncore PMU support for
Intel Diamond Rapids (DMR) CPUs, which center around these
four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and
each IMH die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA,
UBR, PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
(Zide Chen)
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang
and Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL)
CPUs, which are a low-power variant of Panther Lake.
(Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code. (Martin Schiller)
Performance enhancements:
- core: Speed up kexec shutdown by avoiding unnecessary
cross CPU calls. (Jan H. Schönherr)
- core: Fix slow perf_event_task_exit() with LBR callstacks
(Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize
the unwinding code for other architectures. (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmmJhTURHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1i/qw/9F/sjMqbxH8d3kPXB8wk2eUuSkynQ2aNw
Zec9qtfCC5N1U9b2D7ywGJRscTmWYnX/3BKTyzFuyA6SDz6buAgDDIGPlHi+9Fww
+RUUS3lQ7N3pVWZ4Ifu3kbh3Vz4lkQuOXhfcjiyIMS6QIxfrcSLFoKHK+2V6PeU+
x0k+THHz/Ymg+DIpqSjqil1yrKaUmU9xRrbnyy6zJB1duREQrkYBhIWL1+bcd7SA
89RVAGXQ+sWzVQMPaKrMkZj6GavOCB7zseigiiwjBRLznukS2OulDDe8zR6pCJZp
wbdc7TR/nCm+QtNfkHlOmTQvsPAXiXNyXe5Vi8aFjGc0uMGhHaeiL9ah/bwsKA5m
Bm5Y7oVSmBlCJbcr/CTrGYkb+WwvLIgPCwVkn4FYPlsWv+U92qTOx9q7qKmIDFaj
1oUXCwoHbYrYnoZqZqPp2h689m0Lh/lsGhy0QRt8aGnKu0SDjMaqRGbYWH0UI0kA
aDnZstVHG76RnVi0143q8HcvvjNZb82NL0cS749tY/YcwH4kUEGj2XuSK2Ar887T
H0oDJHXijMlGXWqO5bK3WMoCQajR7nRyqBo7/rKYj20OjXmwoXS3vel77/s8WFo2
fUUC469MacDzyxdBNutnkJvvcvsUio3r4MWFsEEWQk2nUE58PtN8YM8j/FdNYpql
zAZ4Jx/A0RM=
=4SRB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
"x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs
(Dapeng Mi)
Compared to previous iterations of the Intel PMU code, there's been
a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to replace the
Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
- Likewise, a large series adds uncore PMU support for Intel Diamond
Rapids (DMR) CPUs (Zide Chen)
This centers around these four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and each IMH
die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA, UBR,
PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang and
Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL) CPUs,
which are a low-power variant of Panther Lake (Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code (Martin Schiller)
Performance enhancements:
- Speed up kexec shutdown by avoiding unnecessary cross CPU calls
(Jan H. Schönherr)
- Fix slow perf_event_task_exit() with LBR callstacks (Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize the
unwinding code for other architectures (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)"
* tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
s390: remove kvm_types.h from Kbuild
uprobes: Fix incorrect lockdep condition in filter_chain()
x86/ibs: Fix typo in dc_l2tlb_miss comment
x86/uprobes: Fix XOL allocation failure for 32-bit tasks
perf/x86/intel/uncore: Convert comma to semicolon
perf/x86/intel: Add support for rdpmc user disable feature
perf/x86: Use macros to replace magic numbers in attr_rdpmc
perf/x86/intel: Add core PMU support for Novalake
perf/x86/intel: Add support for PEBS memory auxiliary info field in NVL
perf/x86/intel: Add core PMU support for DMR
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
perf/x86/intel: Support the 4 new OMR MSRs introduced in DMR and NVL
perf/core: Fix slow perf_event_task_exit() with LBR callstacks
perf/core: Speed up kexec shutdown by avoiding unnecessary cross CPU calls
uprobes: use kmap_local_page() for temporary page mappings
arm/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
mips/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
arm64/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
riscv/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
perf/x86/intel/uncore: Add Nova Lake support
...
In order to do a user space stacktrace the current task needs to be a user
task that has executed in user space. It use to be possible to test if a
task is a user task or not by simply checking the task_struct mm field. If
it was non NULL, it was a user task and if not it was a kernel task.
But things have changed over time, and some kernel tasks now have their
own mm field.
An idea was made to instead test PF_KTHREAD and two functions were used to
wrap this check in case it became more complex to test if a task was a
user task or not[1]. But this was rejected and the C code simply checked
the PF_KTHREAD directly.
It was later found that not all kernel threads set PF_KTHREAD. The io-uring
helpers instead set PF_USER_WORKER and this needed to be added as well.
But checking the flags is still not enough. There's a very small window
when a task exits that it frees its mm field and it is set back to NULL.
If perf were to trigger at this moment, the flags test would say its a
user space task but when perf would read the mm field it would crash with
at NULL pointer dereference.
Now there are flags that can be used to test if a task is exiting, but
they are set in areas that perf may still want to profile the user space
task (to see where it exited). The only real test is to check both the
flags and the mm field.
Instead of making this modification in every location, create a new
is_user_task() helper function that does all the tests needed to know if
it is safe to read the user space memory or not.
[1] https://lore.kernel.org/all/20250425204120.639530125@goodmis.org/
Fixes: 90942f9fac ("perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL")
Closes: https://lore.kernel.org/all/0d877e6f-41a7-4724-875d-0b0a27b8a545@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260129102821.46484722@gandalf.local.home
When calling refcount_inc(&event->mmap_count) inside perf_mmap_rb(), the
following warning is triggered:
refcount_t: addition on 0; use-after-free.
WARNING: lib/refcount.c:25
PoC:
struct perf_event_attr attr = {0};
int fd = syscall(__NR_perf_event_open, &attr, 0, -1, -1, 0);
mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
int victim = syscall(__NR_perf_event_open, &attr, 0, -1, fd,
PERF_FLAG_FD_OUTPUT);
mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, victim, 0);
This occurs when creating a group member event with the flag
PERF_FLAG_FD_OUTPUT. The group leader should be mmap-ed and then mmap-ing
the event triggers the warning.
Since the event has copied the output_event in perf_event_set_output(),
event->rb is set. As a result, perf_mmap_rb() calls
refcount_inc(&event->mmap_count) when event->mmap_count = 0.
Disallow the case when event->mmap_count = 0. This also prevents two
events from updating the same user_page.
Fixes: 448f97fba9 ("perf: Convert mmap() refcounts to refcount_t")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Will Rosenberg <whrosenb@asu.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260119184956.801238-1-whrosenb@asu.edu
I got a report that a task is stuck in perf_event_exit_task() waiting
for global_ctx_data_rwsem. On large systems with lots threads, it'd
have performance issues when it grabs the lock to iterate all threads
in the system to allocate the context data.
And it'd block task exit path which is problematic especially under
memory pressure.
perf_event_open
perf_event_alloc
attach_perf_ctx_data
attach_global_ctx_data
percpu_down_write (global_ctx_data_rwsem)
for_each_process_thread
alloc_task_ctx_data
do_exit
perf_event_exit_task
percpu_down_read (global_ctx_data_rwsem)
It should not hold the global_ctx_data_rwsem on the exit path. Let's
skip allocation for exiting tasks and free the data carefully.
Reported-by: Rosalie Fang <rosaliefang@google.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260112165157.1919624-1-namhyung@kernel.org
There are typically a lot of PMUs registered, but in many cases only few
of them have an event registered (like the "cpu" PMU in the presence of
the watchdog). As the mutex is already held, it's safe to just check for
existing events before doing the cross CPU call.
This change saves tens of milliseconds from kexec time (perceived as
steal time during a hypervisor host update), with <2ms remaining for
this step in the shutdown. There might be additional potential for
parallelization or we could just disable performance monitoring during
the actual shutdown and be less graceful about it.
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the change to hrtimer_try_to_cancel() in
perf_swevent_cancel_hrtimer() it appears possible for the hrtimer to
still be active by the time the event gets freed.
Make sure the event does a full hrtimer_cancel() on the free path by
installing a perf_event::destroy handler.
Fixes: eb3182ef04 ("perf/core: Fix system hang caused by cpu-clock usage")
Reported-by: CyberUnicorns <a101e_iotvul@163.com>
Tested-by: CyberUnicorns <a101e_iotvul@163.com>
Debugged-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The mediated_pmu_account_event() and perf_create_mediated_pmu()
functions implement the exclusion between '!exclude_guest' counters
and mediated vPMUs. Their implementation is basically identical,
except mirrored in what they count/check.
Make sure the actual implementations reflect this similarity.
Notably:
- while perf_release_mediated_pmu() has an underflow check;
mediated_pmu_unaccount_event() did not.
- while perf_create_mediated_pmu() has an inc_not_zero() path;
mediated_pmu_account_event() did not.
Also, the inc_not_zero() path can be outsite of
perf_mediated_pmu_mutex. The mutex must guard the 0->1 (of either
nr_include_guest_events or nr_mediated_pmu_vms) transition, but once a
counter is already non-zero, it can safely be incremented further.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251208115156.GE3707891@noisy.programming.kicks-ass.net
Wire up system vector 0xf5 for handling PMIs (i.e. interrupts delivered
through the LVTPC) while running KVM guests with a mediated PMU. Perf
currently delivers all PMIs as NMIs, e.g. so that events that trigger while
IRQs are disabled aren't delayed and generate useless records, but due to
the multiplexing of NMIs throughout the system, correctly identifying NMIs
for a mediated PMU is practically infeasible.
To (greatly) simplify identifying guest mediated PMU PMIs, perf will
switch the CPU's LVTPC between PERF_GUEST_MEDIATED_PMI_VECTOR and NMI when
guest PMU context is loaded/put. I.e. PMIs that are generated by the CPU
while the guest is active will be identified purely based on the IRQ
vector.
Route the vector through perf, e.g. as opposed to letting KVM attach a
handler directly a la posted interrupt notification vectors, as perf owns
the LVTPC and thus is the rightful owner of PERF_GUEST_MEDIATED_PMI_VECTOR.
Functionally, having KVM directly own the vector would be fine (both KVM
and perf will be completely aware of when a mediated PMU is active), but
would lead to an undesirable split in ownership: perf would be responsible
for installing the vector, but not handling the resulting IRQs.
Add a new perf_guest_info_callbacks hook (and static call) to allow KVM to
register its handler with perf when running guests with mediated PMUs.
Note, because KVM always runs guests with host IRQs enabled, there is no
danger of a PMI being delayed from the guest's perspective due to using a
regular IRQ instead of an NMI.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-9-seanjc@google.com
Add exported APIs to load/put a guest mediated PMU context. KVM will
load the guest PMU shortly before VM-Enter, and put the guest PMU shortly
after VM-Exit.
On the perf side of things, schedule out all exclude_guest events when the
guest context is loaded, and schedule them back in when the guest context
is put. I.e. yield the hardware PMU resources to the guest, by way of KVM.
Note, perf is only responsible for managing host context. KVM is
responsible for loading/storing guest state to/from hardware.
[sean: shuffle patches around, write changelog]
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-8-seanjc@google.com
Current perf doesn't explicitly schedule out all exclude_guest events
while the guest is running. There is no problem with the current
emulated vPMU. Because perf owns all the PMU counters. It can mask the
counter which is assigned to an exclude_guest event when a guest is
running (Intel way), or set the corresponding HOSTONLY bit in evsentsel
(AMD way). The counter doesn't count when a guest is running.
However, either way doesn't work with the introduced mediated vPMU.
A guest owns all the PMU counters when it's running. The host should not
mask any counters. The counter may be used by the guest. The evsentsel
may be overwritten.
Perf should explicitly schedule out all exclude_guest events to release
the PMU resources when entering a guest, and resume the counting when
exiting the guest.
It's possible that an exclude_guest event is created when a guest is
running. The new event should not be scheduled in as well.
The ctx time is shared among different PMUs. The time cannot be stopped
when a guest is running. It is required to calculate the time for events
from other PMUs, e.g., uncore events. Add timeguest to track the guest
run time. For an exclude_guest event, the elapsed time equals
the ctx time - guest time.
Cgroup has dedicated times. Use the same method to deduct the guest time
from the cgroup time as well.
[sean: massage comments]
Co-developed-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-7-seanjc@google.com
The current perf tracks two timestamps for the normal ctx and cgroup.
The same type of variables and similar codes are used to track the
timestamps. In the following patch, the third timestamp to track the
guest time will be introduced.
To avoid the code duplication, add a new struct perf_time_ctx and factor
out a generic function update_perf_time_ctx().
No functional change.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-6-seanjc@google.com
Currently, exposing PMU capabilities to a KVM guest is done by emulating
guest PMCs via host perf events, i.e. by having KVM be "just" another user
of perf. As a result, the guest and host are effectively competing for
resources, and emulating guest accesses to vPMU resources requires
expensive actions (expensive relative to the native instruction). The
overhead and resource competition results in degraded guest performance
and ultimately very poor vPMU accuracy.
To address the issues with the perf-emulated vPMU, introduce a "mediated
vPMU", where the data plane (PMCs and enable/disable knobs) is exposed
directly to the guest, but the control plane (event selectors and access
to fixed counters) is managed by KVM (via MSR interceptions). To allow
host perf usage of the PMU to (partially) co-exist with KVM/guest usage
of the PMU, KVM and perf will coordinate to a world switch between host
perf context and guest vPMU context near VM-Enter/VM-Exit.
Add two exported APIs, perf_{create,release}_mediated_pmu(), to allow KVM
to create and release a mediated PMU instance (per VM). Because host perf
context will be deactivated while the guest is running, mediated PMU usage
will be mutually exclusive with perf analysis of the guest, i.e. perf
events that do NOT exclude the guest will not behave as expected.
To avoid silent failure of !exclude_guest perf events, disallow creating a
mediated PMU if there are active !exclude_guest events, and on the perf
side, disallowing creating new !exclude_guest perf events while there is
at least one active mediated PMU.
Exempt PMU resources that do not support mediated PMU usage, i.e. that are
outside the scope/view of KVM's vPMU and will not be swapped out while the
guest is running.
Guard mediated PMU with a new kconfig to help readers identify code paths
that are unique to mediated PMU support, and to allow for adding arch-
specific hooks without stubs. KVM x86 is expected to be the only KVM
architecture to support a mediated PMU in the near future (e.g. arm64 is
trending toward a partitioned PMU implementation), and KVM x86 will select
PERF_GUEST_MEDIATED_PMU unconditionally, i.e. won't need stubs.
Immediately select PERF_GUEST_MEDIATED_PMU when KVM x86 is enabled so that
all paths are compile tested. Full KVM support is on its way...
[sean: add kconfig and WARNing, rewrite changelog, swizzle patch ordering]
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-5-seanjc@google.com
Move the freeing of any security state associated with a perf event from
_free_event() to __free_event(), i.e. invoke security_perf_event_free() in
the error paths for perf_event_alloc(). This will allow adding potential
error paths in perf_event_alloc() that can occur after allocating security
state.
Note, kfree() and thus security_perf_event_free() is a nop if
event->security is NULL, i.e. calling security_perf_event_free() even if
security_perf_event_alloc() fails or is never reached is functionality ok.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-4-seanjc@google.com
Only KVM knows the exact time when a guest is entering/exiting. Expose
two interfaces to KVM to switch the ownership of the PMU resources.
All the pinned events must be scheduled in first. Extend the
perf_event_sched_in() helper to support extra flag, e.g., EVENT_GUEST.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-3-seanjc@google.com
To optimize the cgroup context switch, the perf_event_pmu_context
iteration skips the PMUs without cgroup events. A bool cgroup was
introduced to indicate the case. It can work, but this way is hard to
extend for other cases, e.g. skipping non-mediated PMUs. It doesn't
make sense to keep adding bool variables.
Pass the event_type instead of the specific bool variable. Check both
the event_type and related pmu_ctx variables to decide whether skipping
a PMU.
Event flags, e.g., EVENT_CGROUP, should be cleard in the ctx->is_active.
Add EVENT_FLAGS to indicate such event flags.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Link: https://patch.msgid.link/20251206001720.468579-2-seanjc@google.com
For events with inherit_stat enabled, a "read" event will be generated
to collect per task event counts on task exit.
The call chain is as follows:
do_exit
-> perf_event_exit_task
-> perf_event_exit_task_context
-> perf_event_exit_event
-> perf_remove_from_context
-> perf_child_detach
-> sync_child_event
-> perf_event_read_event
However, the child event context detaches the task too early in
perf_event_exit_task_context, which causes sync_child_event to never
generate the read event in this case, since child_event->ctx->task is
always set to TASK_TOMBSTONE. Fix that by moving context lock section
backward to ensure ctx->task is not set to TASK_TOMBSTONE before
generating the read event.
Because perf_event_free_task calls perf_event_exit_task_context with
exit = false to tear down all child events from the context, and the
task never lived, accessing the task PID can lead to a use-after-free.
To fix that, let sync_child_event read task from argument and move the
call to the only place it should be triggered to avoid the effect of
setting ctx->task to TASK_TOMESTONE, and add a task parameter to
perf_event_exit_event to trigger the sync_child_event properly when
needed.
This bug can be reproduced by running "perf record -s" and attaching to
any program that generates perf events in its child tasks. If we check
the result with "perf report -T", the last line of the report will leave
an empty table like "# PID TID", which is expected to contain the
per-task event counts by design.
Fixes: ef54c1a476 ("perf: Rework perf_event_exit_event()")
Signed-off-by: Thaumy Cheng <thaumy.love@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linux-perf-users@vger.kernel.org
Link: https://patch.msgid.link/20251209041600.963586-1-thaumy.love@gmail.com
Callchain support:
- Add support for deferred user-space stack unwinding for
perf, enabled on x86. (Peter Zijlstra, Steven Rostedt)
- unwind_user/x86: Enable frame pointer unwinding on x86
(Josh Poimboeuf)
x86 PMU support and infrastructure:
- x86/insn: Simplify for_each_insn_prefix() (Peter Zijlstra)
- x86/insn,uprobes,alternative: Unify insn_is_nop()
(Peter Zijlstra)
Intel PMU driver:
- Large series to prepare for and implement architectural PEBS
support for Intel platforms such as Clearwater Forest (CWF)
and Panther Lake (PTL). (Dapeng Mi, Kan Liang)
- Check dynamic constraints (Kan Liang)
- Optimize PEBS extended config (Peter Zijlstra)
- cstates: Remove PC3 support from LunarLake (Zhang Rui)
- cstates: Add Pantherlake support (Zhang Rui)
- cstates: Clearwater Forest support (Zide Chen)
AMD PMU driver:
- x86/amd: Check event before enable to avoid GPF (George Kennedy)
Fixes and cleanups:
- task_work: Fix NMI race condition (Peter Zijlstra)
- perf/x86: Fix NULL event access and potential PEBS record loss
(Dapeng Mi)
- Misc other fixes and cleanups.
(Dapeng Mi, Ingo Molnar, Peter Zijlstra)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/8GE
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Callchain support:
- Add support for deferred user-space stack unwinding for perf,
enabled on x86. (Peter Zijlstra, Steven Rostedt)
- unwind_user/x86: Enable frame pointer unwinding on x86 (Josh
Poimboeuf)
x86 PMU support and infrastructure:
- x86/insn: Simplify for_each_insn_prefix() (Peter Zijlstra)
- x86/insn,uprobes,alternative: Unify insn_is_nop() (Peter Zijlstra)
Intel PMU driver:
- Large series to prepare for and implement architectural PEBS
support for Intel platforms such as Clearwater Forest (CWF) and
Panther Lake (PTL). (Dapeng Mi, Kan Liang)
- Check dynamic constraints (Kan Liang)
- Optimize PEBS extended config (Peter Zijlstra)
- cstates:
- Remove PC3 support from LunarLake (Zhang Rui)
- Add Pantherlake support (Zhang Rui)
- Clearwater Forest support (Zide Chen)
AMD PMU driver:
- x86/amd: Check event before enable to avoid GPF (George Kennedy)
Fixes and cleanups:
- task_work: Fix NMI race condition (Peter Zijlstra)
- perf/x86: Fix NULL event access and potential PEBS record loss
(Dapeng Mi)
- Misc other fixes and cleanups (Dapeng Mi, Ingo Molnar, Peter
Zijlstra)"
* tag 'perf-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf/x86/intel: Fix and clean up intel_pmu_drain_arch_pebs() type use
perf/x86/intel: Optimize PEBS extended config
perf/x86/intel: Check PEBS dyn_constraints
perf/x86/intel: Add a check for dynamic constraints
perf/x86/intel: Add counter group support for arch-PEBS
perf/x86/intel: Setup PEBS data configuration and enable legacy groups
perf/x86/intel: Update dyn_constraint base on PEBS event precise level
perf/x86/intel: Allocate arch-PEBS buffer and initialize PEBS_BASE MSR
perf/x86/intel: Process arch-PEBS records or record fragments
perf/x86/intel/ds: Factor out PEBS group processing code to functions
perf/x86/intel/ds: Factor out PEBS record processing code to functions
perf/x86/intel: Initialize architectural PEBS
perf/x86/intel: Correct large PEBS flag check
perf/x86/intel: Replace x86_pmu.drain_pebs calling with static call
perf/x86: Fix NULL event access and potential PEBS record loss
perf/x86: Remove redundant is_x86_event() prototype
entry,unwind/deferred: Fix unwind_reset_info() placement
unwind_user/x86: Fix arch=um build
perf: Support deferred user unwind
unwind_user/x86: Teach FP unwind about start of function
...
Currently cpu-clock event always returns 0 count, e.g.,
perf stat -e cpu-clock -- sleep 1
Performance counter stats for 'sleep 1':
0 cpu-clock # 0.000 CPUs utilized
1.002308394 seconds time elapsed
The root cause is the commit 'bc4394e5e7 ("perf: Fix the throttle
error of some clock events")' adds PERF_EF_UPDATE flag check before
calling cpu_clock_event_update() to update the count, however the
PERF_EF_UPDATE flag is never set when the cpu-clock event is stopped in
counting mode (pmu->dev() -> cpu_clock_event_del() ->
cpu_clock_event_stop()). This leads to the cpu-clock event count is
never updated.
To fix this issue, force to set PERF_EF_UPDATE flag for cpu-clock event
just like what task-clock does.
Fixes: bc4394e5e7 ("perf: Fix the throttle error of some clock events")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://patch.msgid.link/20251112080526.3971392-1-dapeng1.mi@linux.intel.com
cpu-clock usage by the async-profiler tool can trigger a system hang,
which got bisected back to the following commit by Octavia Togami:
18dbcbfabf ("perf: Fix the POLL_HUP delivery breakage") causes this issue
The root cause of the hang is that cpu-clock is a special type of SW
event which relies on hrtimers. The __perf_event_overflow() callback
is invoked from the hrtimer handler for cpu-clock events, and
__perf_event_overflow() tries to call cpu_clock_event_stop()
to stop the event, which calls htimer_cancel() to cancel the hrtimer.
But that's a recursion into the hrtimer code from a hrtimer handler,
which (unsurprisingly) deadlocks.
To fix this bug, use hrtimer_try_to_cancel() instead, and set
the PERF_HES_STOPPED flag, which causes perf_swevent_hrtimer()
to stop the event once it sees the PERF_HES_STOPPED flag.
[ mingo: Fixed the comments and improved the changelog. ]
Closes: https://lore.kernel.org/all/CAHPNGSQpXEopYreir+uDDEbtXTBvBvi8c6fYXJvceqtgTPao3Q@mail.gmail.com/
Fixes: 18dbcbfabf ("perf: Fix the POLL_HUP delivery breakage")
Reported-by: Octavia Togami <octavia.togami@gmail.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Octavia Togami <octavia.togami@gmail.com>
Cc: stable@vger.kernel.org
Link: https://github.com/lucko/spark/issues/530
Link: https://patch.msgid.link/20251015051828.12809-1-dapeng1.mi@linux.intel.com
Add support for deferred userspace unwind to perf.
Where perf currently relies on in-place stack unwinding; from NMI
context and all that. This moves the userspace part of the unwind to
right before the return-to-userspace.
This has two distinct benefits, the biggest is that it moves the
unwind to a faultable context. It becomes possible to fault in debug
info (.eh_frame, SFrame etc.) that might not otherwise be readily
available. And secondly, it de-duplicates the user callchain where
multiple samples happen during the same kernel entry.
To facilitate this the perf interface is extended with a new record
type:
PERF_RECORD_CALLCHAIN_DEFERRED
and two new attribute flags:
perf_event_attr::defer_callchain - to request the user unwind be deferred
perf_event_attr::defer_output - to request PERF_RECORD_CALLCHAIN_DEFERRED records
The existing PERF_RECORD_SAMPLE callchain section gets a new
context type:
PERF_CONTEXT_USER_DEFERRED
After which will come a single entry, denoting the 'cookie' of the
deferred callchain that should be attached here, matching the 'cookie'
field of the above mentioned PERF_RECORD_CALLCHAIN_DEFERRED.
The 'defer_callchain' flag is expected on all events with
PERF_SAMPLE_CALLCHAIN. The 'defer_output' flag is expect on the event
responsible for collecting side-band events (like mmap, comm etc.).
Setting 'defer_output' on multiple events will get you duplicated
PERF_RECORD_CALLCHAIN_DEFERRED records.
Based on earlier patches by Josh and Steven.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251023150002.GR4067720@noisy.programming.kicks-ass.net
Some file systems like FUSE-based ones or overlayfs may record the backing
file in struct vm_area_struct vm_file, instead of the user file that the
user mmapped.
That causes perf to misreport the device major/minor numbers of the file
system of the file, and the generation of the file, and potentially other
inode details. There is an existing helper file_user_inode() for that
situation.
Use file_user_inode() instead of file_inode() to get the inode for MMAP2
events.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record -e cycles:u -- /root/test/merged/cat /proc/self/maps
...
55b2c91d0000-55b2c926b000 r-xp 00018000 00:1a 3419 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.004 MB perf.data (5 samples) ]
#
# stat /root/test/merged/cat
File: /root/test/merged/cat
Size: 1127792 Blocks: 2208 IO Block: 4096 regular file
Device: 0,26 Inode: 3419 Links: 1
Access: (0755/-rwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2025-09-08 12:23:59.453309624 +0000
Modify: 2025-09-08 12:23:59.454309624 +0000
Change: 2025-09-08 12:23:59.454309624 +0000
Birth: 2025-09-08 12:23:59.453309624 +0000
Before:
Device reported 00:02 differs from stat output and /proc/self/maps
# perf script --show-mmap-events | grep /root/test/merged/cat
cat 377 [-01] 243.078558: PERF_RECORD_MMAP2 377/377: [0x55b2c91d0000(0x9b000) @ 0x18000 00:02 3419 2068525940]: r-xp /root/test/merged/cat
After:
Device reported 00:1a is the same as stat output and /proc/self/maps
# perf script --show-mmap-events | grep /root/test/merged/cat
cat 362 [-01] 127.755167: PERF_RECORD_MMAP2 362/362: [0x55ba6e781000(0x9b000) @ 0x18000 00:1a 3419 0]: r-xp /root/test/merged/cat
With respect to stable kernels, overlayfs mmap function ovl_mmap() was
added in v4.19 but file_user_inode() was not added until v6.8 and never
back-ported to stable kernels. FMODE_BACKING that it depends on was added
in v6.5. This issue has gone largely unnoticed, so back-porting before
v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite
version, although in practice the next long term kernel is 6.12.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org # 6.8
Some file systems like FUSE-based ones or overlayfs may record the backing
file in struct vm_area_struct vm_file, instead of the user file that the
user mmapped.
Since commit def3ae83da ("fs: store real path instead of fake path in
backing file f_path"), file_path() no longer returns the user file path
when applied to a backing file. There is an existing helper
file_user_path() for that situation.
Use file_user_path() instead of file_path() to get the path for MMAP
and MMAP2 events.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record -e intel_pt//u -- /root/test/merged/cat /proc/self/maps
...
55b0ba399000-55b0ba434000 r-xp 00018000 00:1a 3419 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.060 MB perf.data ]
#
Before:
File name is wrong (/cat), so decoding fails:
# perf script --no-itrace --show-mmap-events
cat 367 [016] 100.491492: PERF_RECORD_MMAP2 367/367: [0x55b0ba399000(0x9b000) @ 0x18000 00:02 3419 489959280]: r-xp /cat
...
# perf script --itrace=e | wc -l
Warning:
19 instruction trace errors
19
#
After:
File name is correct (/root/test/merged/cat), so decoding is ok:
# perf script --no-itrace --show-mmap-events
cat 364 [016] 72.153006: PERF_RECORD_MMAP2 364/364: [0x55ce4003d000(0x9b000) @ 0x18000 00:02 3419 3132534314]: r-xp /root/test/merged/cat
# perf script --itrace=e
# perf script --itrace=e | wc -l
0
#
Fixes: def3ae83da ("fs: store real path instead of fake path in backing file f_path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
It was reported that Intel PT address filters do not work in Docker
containers. That relates to the use of overlayfs.
overlayfs records the backing file in struct vm_area_struct vm_file,
instead of the user file that the user mmapped. In order for an address
filter to match, it must compare to the user file inode. There is an
existing helper file_user_inode() for that situation.
Use file_user_inode() instead of file_inode() to get the inode for address
filter matching.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record --buildid-mmap -e intel_pt//u --filter 'filter * @ /root/test/merged/cat' -- /root/test/merged/cat /proc/self/maps
...
55d61d246000-55d61d2e1000 r-xp 00018000 00:1a 3418 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data ]
# perf buildid-cache --add /root/test/merged/cat
Before:
Address filter does not match so there are no control flow packets
# perf script --itrace=e
# perf script --itrace=b | wc -l
0
# perf script -D | grep 'TIP.PGE' | wc -l
0
#
After:
Address filter does match so there are control flow packets
# perf script --itrace=e
# perf script --itrace=b | wc -l
235
# perf script -D | grep 'TIP.PGE' | wc -l
57
#
With respect to stable kernels, overlayfs mmap function ovl_mmap() was
added in v4.19 but file_user_inode() was not added until v6.8 and never
back-ported to stable kernels. FMODE_BACKING that it depends on was added
in v6.5. This issue has gone largely unnoticed, so back-porting before
v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite
version, although in practice the next long term kernel is 6.12.
Closes: https://lore.kernel.org/linux-perf-users/aBCwoq7w8ohBRQCh@fremen.lan
Reported-by: Edd Barrett <edd@theunixzoo.co.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org # 6.8
- Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
- Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom callbacks
through a File-type-based and directory-scope-based API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific read_poll_timeout()
helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs based on
(&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor and class
ID numbers
- Implement Display to print actual vendor and class names; Debug to print
the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
- sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
- Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaNmQGwAKCRBFlHeO1qrK
LmPzAP9msIvK8eFT4CEDK4buX1gd+VBOdy8mAjAeJ2F80FIo8wEAtOdddNaaqWVF
m4ac2/a2bSRKMGPX+wIM7d2HGyC7sgY=
=XbU+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
-----BEGIN PGP SIGNATURE-----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=LeQi
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
Core perf code updates:
- Convert mmap() related reference counts to refcount_t. This
is in reaction to the recently fixed refcount bugs, which
could have been detected earlier and could have mitigated
the bug somewhat. (Thomas Gleixner, Peter Zijlstra)
- Clean up and simplify the callchain code, in preparation
for sframes. (Steven Rostedt, Josh Poimboeuf)
Uprobes updates:
- Add support to optimize usdt probes on x86-64, which
gives a substantial speedup. (Jiri Olsa)
- Cleanups and fixes on x86 (Peter Zijlstra)
PMU driver updates:
- Various optimizations and fixes to the Intel PMU driver
(Dapeng Mi)
Misc cleanups and fixes:
- Remove redundant __GFP_NOWARN (Qianfeng Rong)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sVXH
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core perf code updates:
- Convert mmap() related reference counts to refcount_t. This is in
reaction to the recently fixed refcount bugs, which could have been
detected earlier and could have mitigated the bug somewhat (Thomas
Gleixner, Peter Zijlstra)
- Clean up and simplify the callchain code, in preparation for
sframes (Steven Rostedt, Josh Poimboeuf)
Uprobes updates:
- Add support to optimize usdt probes on x86-64, which gives a
substantial speedup (Jiri Olsa)
- Cleanups and fixes on x86 (Peter Zijlstra)
PMU driver updates:
- Various optimizations and fixes to the Intel PMU driver (Dapeng Mi)
Misc cleanups and fixes:
- Remove redundant __GFP_NOWARN (Qianfeng Rong)"
* tag 'perf-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits)
selftests/bpf: Fix uprobe_sigill test for uprobe syscall error value
uprobes/x86: Return error from uprobe syscall when not called from trampoline
perf: Skip user unwind if the task is a kernel thread
perf: Simplify get_perf_callchain() user logic
perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL
perf: Have get_perf_callchain() return NULL if crosstask and user are set
perf: Remove get_perf_callchain() init_nr argument
perf/x86: Print PMU counters bitmap in x86_pmu_show_pmu_cap()
perf/x86/intel: Add ICL_FIXED_0_ADAPTIVE bit into INTEL_FIXED_BITS_MASK
perf/x86/intel: Change macro GLOBAL_CTRL_EN_PERF_METRICS to BIT_ULL(48)
perf/x86: Add PERF_CAP_PEBS_TIMING_INFO flag
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
perf/x86/intel: Use early_initcall() to hook bts_init()
uprobes: Remove redundant __GFP_NOWARN
selftests/seccomp: validate uprobe syscall passes through seccomp
seccomp: passthrough uprobe systemcall without filtering
selftests/bpf: Fix uprobe syscall shadow stack test
selftests/bpf: Change test_uretprobe_regs_change for uprobe and uretprobe
selftests/bpf: Add uprobe_regs_equal test
selftests/bpf: Add optimized usdt variant for basic usdt test
...
Currently uprobe (BPF_PROG_TYPE_KPROBE) program can't write to the
context registers data. While this makes sense for kprobe attachments,
for uprobe attachment it might make sense to be able to change user
space registers to alter application execution.
Since uprobe and kprobe programs share the same type (BPF_PROG_TYPE_KPROBE),
we can't deny write access to context during the program load. We need
to check on it during program attachment to see if it's going to be
kprobe or uprobe.
Storing the program's write attempt to context and checking on it
during the attachment.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that the driver core can properly handle constant struct bus_type,
move the pmu_bus variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-events-v1-1-c779d1639c3a@marliere.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The event_limit can be set by the PERF_EVENT_IOC_REFRESH to limit the
number of events. When the event_limit reaches 0, the POLL_HUP signal
should be sent. But it's missed.
The corresponding counter should be stopped when the event_limit reaches
0. It was implemented in the ARCH-specific code. However, since the
commit 9734e25fbf ("perf: Fix the throttle logic for a group"), all
the ARCH-specific code has been moved to the generic code. The code to
handle the event_limit was lost.
Add the event->pmu->stop(event, 0); back.
Fixes: 9734e25fbf ("perf: Fix the throttle logic for a group")
Closes: https://lore.kernel.org/lkml/aICYAqM5EQUlTqtX@li-2b55cdcc-350b-11b2-a85c-a78bff51fc11.ibm.com/
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lkml.kernel.org/r/20250811182644.1305952-1-kan.liang@linux.intel.com
If the task is not a user thread, there's no user stack to unwind.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250820180428.930791978@kernel.org
To determine if a task is a kernel thread or not, it is more reliable to
use (current->flags & (PF_KTHREAD|PF_USER_WORKERi)) than to rely on
current->mm being NULL. That is because some kernel tasks (io_uring
helpers) may have a mm field.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250820180428.592367294@kernel.org
The 'init_nr' argument has double duty: it's used to initialize both the
number of contexts and the number of stack entries. That's confusing
and the callers always pass zero anyway. Hard code the zero.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <Namhyung@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20250820180428.259565081@kernel.org
The recently fixed reference count leaks could have been detected by using
refcount_t and refcount_t would have mitigated the potential overflow at
least.
Now that the code is properly structured, convert the mmap() related
mmap_count variants over to refcount_t.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104020.071507932@infradead.org
Needed because refcount_inc() doesn't allow the 0->1 transition.
Specifically, this is the case where we've created the RB, this means
there was no RB, and as such there could not have been an mmap.
Additionally we hold mmap_mutex to serialize everything.
This must be the first.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250812104019.956479989@infradead.org
Mostly just re-indent noise.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.838047976@infradead.org
Move the RB buffer allocation branch into its own function.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.722214699@infradead.org
Move the AUX buffer allocation branch into its own function.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.494205648@infradead.org
After duplicating the common code into the rb/aux branches is it
possible to use a simple guard() for the aux_mutex. Making the aux
branch self-contained.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.246250452@infradead.org
unlock and aux_unlock are now identical, remove the aux_unlock one.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/20250812104019.131293512@infradead.org
