This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The Fintek F81532A/534A/535/536 family relies on the
F81534A_CTRL_CMD_ENABLE_PORT (116h) register during initialization to
both determine serial port status and control port creation. If the
driver experiences fast load/unload cycles, the device state may becomes
unstable, resulting in the incomplete generation of serial ports.
Performing a dummy read operation on the register prior to the initial
write command resolves the issue. This clears the device's stale internal
state. Subsequent write operations will correctly generate all serial
ports.
This patch also removes the retry loop in f81534a_ctrl_set_register()
because the stale state has been fixed.
Tested on: HygonDM1SLT(Hygon C86 3250 8-core Processor)
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Signed-off-by: Johan Hovold <johan@kernel.org>
Here is the big set of USB and Thunderbolt driver updates for 6.19-rc1.
Nothing major here, just lots of tiny updates for most of the common USB
drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTLNQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn29wCcD23xCSWuRIKHfSWlefCwptHKT0AAoM0NJdeO
C4/4pui5ifTu1g5Vud1r
=Sm/3
-----END PGP SIGNATURE-----
Merge tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
Move Telit 0x10c7 composition right after 0x10c6 composition and
before 0x10c8 composition.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
NDI devices have been using a latency timer of 1 ms since commit
b760dac290 ("USB: ftdi: support NDI devices"), which also added a
vendor specific module parameter that could be used to override the
default value for these devices.
Module parameters should generally be avoided as they apply to all
devices managed by a driver and vendor specific hacks should be kept out
of mainline.
Drop the module parameter in favour of the generic sysfs interface for
setting the latency timer (e.g. using udev rules) while keeping the
default 1 ms timer for NDI devices.
Note that there seems to be no (correct) public references to the module
parameter and most likely no one is using it.
Cc: Ryan Mann <rmann@ndigital.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
NDI devices remap the 19200 line speed to 1.2 Mbps.
Use the quirk pointer from the match table to enable the quirk instead
of comparing PIDs on every speed change.
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the quirk function comments that were using odd formatting and
were referring to a non-existing function.
Signed-off-by: Johan Hovold <johan@kernel.org>
Rewrite the 8u2232c quirk to avoid the manufacturer and product string
comparisons for the second port which will always be bound.
Signed-off-by: Johan Hovold <johan@kernel.org>
Probe of a device should generally be silent unless errors are
encountered.
Stop logging that the JTAG port is ignored when probing devices with
such a reserved port.
This also maintains consistency with devices that match on interface
number to avoid binding to reserved ports.
Note that the message is not even correct for the second port of the ST
Micro Connect Lite.
Signed-off-by: Johan Hovold <johan@kernel.org>
Some FTDI devices have the first port reserved for JTAG and have been
using a dedicated quirk to prevent binding to it.
As can be inferred directly or indirectly from the commit messages,
almost all of these devices are dual port devices which means that the
more recently added macro for matching on interface number can be used
instead (and some such devices do so already).
This avoids probing interfaces that will never be bound and cleans up
the match table somewhat.
Note that the JTAG quirk is kept for quad port devices, which would
otherwise require three match entries.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
The U-Blox EVK-M101 enumerates as 1546:0506 [1] with four FTDI interfaces:
- EVK-M101 current sensors
- EVK-M101 I2C
- EVK-M101 UART
- EVK-M101 port D
Only the third USB interface is a UART. This change lets ftdi_sio probe
the VID/PID and registers only interface #3 as a TTY, leaving the rest
available for other drivers.
[1]
usb 5-1.3: new high-speed USB device number 11 using xhci_hcd
usb 5-1.3: New USB device found, idVendor=1546, idProduct=0506, bcdDevice= 8.00
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.3: Product: EVK-M101
usb 5-1.3: Manufacturer: u-blox AG
Datasheet: https://content.u-blox.com/sites/default/files/documents/EVK-M10_UserGuide_UBX-21003949.pdf
Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com>
Link: https://lore.kernel.org/20250926060235.3442748-1-cryosay@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Drop unnecessary initialisation of variables that are always assigned
before being used.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up set_termios() by using a shorter identifier for the control
request value, replacing a ternary operator and adding some missing
braces to make it more readable.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Refactor by adding two control request helpers to make the code more
readable.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the driver device type checks by moving logical operators to
the previous line and using consistent indentation of continuation
lines.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the tiocmset() implementation by simplifying the flag check,
dropping some dev_dbg(), logging errors using dev_err() and using a
common control message call for both DTR and RTS to make the existing
logic easier to follow.
Note that the modem control lines are currently only manipulated in this
function, which therefore does not require any locking.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Clean up the tiocmset() implementation by dropping the dtr and rts flags
to make the logic a little easier to follow.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC
should not deassert any lines that are not in the mask.
Fix this long-standing issue dating back to 2003 when the support for
these ioctls was added with the introduction of the tiocmset() callback.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Asserting or deasserting a modem control line using TIOCMBIS or TIOCMBIC
should not deassert any lines that are not in the mask.
Fix this long-standing regression dating back to 2003 when the
tiocmset() callback was introduced.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Here are the USB serial updates for 6.18-rc1 consisting of some new
modem device ids and a trivial cleanup.
Everything has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaNU3ZQAKCRALxc3C7H1l
CGugAP9omygiNhS3fWhrQG8yV6u54o3qy6PV96LhilGqzX42OAEAzw7VpcaZu48z
x9NiJFKETmPx3C2gVM7bY0+B4J7xfQs=
=2IYa
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 6.18-rc1
Here are the USB serial updates for 6.18-rc1 consisting of some new
modem device ids and a trivial cleanup.
Everything has been in linux-next with no reported issues.
* tag 'usb-serial-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add SIMCom 8230C compositions
USB: serial: oti6858: remove extranenous ; after comment
There is a redundant semicolon after a comment, remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Here is the big set of USB and Thunderbolt driver changes for 6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates, no
major new features this development cycle. Stuff included in here is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are "obviously
correct" :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaIeVLw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn3RACgg394VU3ENwqvkh1iF95fVwVheJYAn08YUeoM
98vPdogv4+kuC3B0TbiM
=7pfy
-----END PGP SIGNATURE-----
Merge tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates,
no major new features this development cycle. Stuff included in here
is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are
'obviously correct' :)"
* tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits)
usb: musb: omap2430: clean up probe error handling
usb: musb: omap2430: fix device leak at unbind
usb: gadget: udc: renesas_usb3: fix device leak at unbind
usb: dwc3: meson-g12a: fix device leaks at unbind
usb: dwc3: imx8mp: fix device leak at unbind
usb: musb: omap2430: enable compile testing
usb: gadget: udc: renesas_usb3: drop unused module alias
usb: xhci: print xhci->xhc_state when queue_command failed
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()
USB: serial: option: add Foxconn T99W709
usb: core: add urb->sgt parameter description
thunderbolt: Fix copy+paste error in match_service_id()
usb: typec: ucsi: Update power_supply on power role change
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
usb: typec: fusb302: cache PD RX state
usb: typec: ucsi: yoga-c630: add DRM dependency
usb: gadget : fix use-after-free in composite_dev_cleanup()
usb: chipidea: imx: Add a missing blank line
usb: gadget: f_uac1: replace scnprintf() with sysfs_emit()
usb: usblp: clean up assignment inside if conditions
...
Here's a new modem device id.
This has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaIIDiwAKCRALxc3C7H1l
CGspAP9JWbxqxUkjVL1SbDo33GkPpFzvgChd/T3c9aQFVzbhKgEA8aiBRjj8SW6D
D7LnACK+zJ3QnxKAgLOAU46H5+UXzQY=
=eFS2
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.17-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial device id for 6.17-rc1
Here's a new modem device id.
This has been in linux-next with no reported issues.
* tag 'usb-serial-6.17-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Foxconn T99W709
Here are the USB serial updates for 6.17-rc1, including
- switch to new gpiolib interface that can return errors
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCaIICfQAKCRALxc3C7H1l
CHV4AQCvorLSquAZcYd//Ytx7p8p26TTG1fYHsxiLeyCdBqcLQD/YPMNoJrKTRBL
in3L3/ldbBrGr6vI8cTvQYVmlWtJ/w4=
=NGRU
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 6.17-rc1
Here are the USB serial updates for 6.17-rc1, including
- switch to new gpiolib interface that can return errors
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cp210x: use new GPIO line value setter callbacks
USB: serial: ftdi_sio: use new GPIO line value setter callbacks
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmh9azkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG7GIH/0lpQtHRl6N+q2Qs
v75iG2ZouWyw2JlhUOHAToKU58MZqqTXLZzc8ZdY6fAd7DpXWKRGSDsyWVyLbUkt
UKGzXEIJsHXYvw2QIPbhkY9gQBWpdZTh4tHztFyKb0QLn81qkibVP6ChOwSzOGa/
xUyQ5v6yH+JvQlnQaCgy6hi7cMrLNSNZmuIjy0yc5Y153YPEtX5OUPO2PstpUx5r
AuiOhU4ewW9QCe07X/Pk7tdn0T2Jg8Kwk1FViaM0RBUf/0GXGfsovIxpUP/eCyMc
MA+9SXXLlDa/4Z8w3EsQYx6m2MnNmm0HPeevCmWqq3+Ocooik4si1BpzHfUaE6n/
/0D8zBg=
=NzEi
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc7' into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NDI (Northern Digital Inc.) is introducing a new product called the
EMGUIDE GEMINI that will use an FTDI chip for USB serial communications.
Add the NDI EMGUIDE GEMINI product ID that uses the NDI Vendor ID
rather than the FTDI Vendor ID, unlike older products.
Signed-off-by: Ryan Mann <rmann@ndigital.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
This code (tty_get -> vhangup -> tty_put) is repeated on few places.
Introduce a helper similar to tty_port_tty_hangup() (asynchronous) to
handle even vhangup (synchronous).
And use it on those places.
In fact, reuse the tty_port_tty_hangup()'s code and call tty_vhangup()
depending on a new bool parameter.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250611100319.186924-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
