set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260303113050.58127-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model FA401UM.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260226141944.352923-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model GX650RX.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260226141944.352923-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some systems have much larger amounts of enumeration attributes
than have been previously encountered. This can lead to page allocation
failures when using kcalloc(). Switch over to using kvcalloc() to
allow larger allocations.
Fixes: 6b2770bfd6 ("platform/x86: hp-bioscfg: enum-attributes")
Cc: stable@vger.kernel.org
Reported-by: Paul Kerry <p.kerry@sheffield.ac.uk>
Tested-by: Paul Kerry <p.kerry@sheffield.ac.uk>
Closes: https://bugs.debian.org/1127612
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260225210646.59381-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Aokzoe A2 Pro is an older device that the oxpec driver is missing the
quirk for. It has the same behavior as the AOKZOE A1 devices. Add a
quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-5-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
X1 Air is an X1 variant with a newer Intel chipset. It uses the same
registers as the X1. Add a quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-4-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
X1z is a variant of OneXPlayer X1 A with 8840U. It seems that only one
user has this one. Add a quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-3-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
OneXPlayer Apex is a new Strix Halo handheld. It uses the same registers
as the OneXPlayer Fly devices. Add a quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-2-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On many devices, the user can toggle the Fn lock state by
pressing Fn + Esc. Forward the associated event to the fn_lock
sysfs attribute as a poll notification.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turns out that the FN lock status can be changed by the underlying
hardware when the user presses a special key combination. Mark the
associated register as volatile to prevent regmap from caching said
value. Also add the necessary suspend/resume handling.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On devices that have not UNIWILL_FEATURE_BATTERY set, the underlying
hardware might still send the UNIWILL_OSD_BATTERY_ALERT event. In such
a situation, the driver will access uninitialized data structures when
handling said event.
Prevent this by only handling the UNIWILL_OSD_BATTERY_ALERT event when
UNIWILL_FEATURE_BATTERY is set.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turns out that both sysfs attributes actually directly control
the FN lock status/super key enable status, rather than the
triggering of the associated events. This behavior was first observed
on a Tuxedo notebook and was belived to be a hardware quirk.
However, it seems that i simply misunderstood the manual of the
OEM software for Intel NUC devices. The correct behavior is:
- fn_lock_toggle_enable enables/disables FN lock mode
- super_key_toggle_enable enables/disables the super key
Rename both sysfs attributes to avoid confusing users.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch adds more Fn hotkeys (like Refresh rate toggle).
Additionally, remap the setup key from KEY_SETUP to KEY_CONFIG.
As KEY_CONFIG is supported by Desktop Environments for launching
system settings, whereas KEY_SETUP is often ignored by userspace.
Signed-off-by: Jesse Guo <JesseGuoTech@outlook.com>
Reviewed-by: Gladyshev Ilya <foxido@foxido.dev>
Link: https://patch.msgid.link/TYCPR01MB6851636256C39B170F2312E5D192A@TYCPR01MB6851.jpnprd01.prod.outlook.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Alienware m18 laptops support G-Mode. Therefore, match them with
G-Series quirks.
Cc: stable@vger.kernel.org
Tested-by: Olexa Bilaniuk <obilaniu@gmail.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20260129-m18-gmode-v1-1-48be521487b9@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reverse engineering of the HP Omen Windows utility shows that for performance
mode it uses the same codes listed in hp_thermal_profile_omen_v1. Therefore it
seems sufficient to add the board model name to omen_thermal_profile_boards.
Tested on Omen 14-fb1xxx: CPU power in performance profile reaches the Windows
limit (65W), instead of 45W in automatic BIOS mode. Max fan speed was reached
as well.
Link: https://patch.msgid.link/20260203164832.40514-1-plotnikovanton@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch enables Victus thermal profile support for the HP
Victus 16-d0xxx. It does so by adding model's DMI board name 88F8 to
victus_thermal_profile_boards.
Tested on a Victus 16-d0xxx:
- Victus thermal profile choices available (quiet, balanced, performance)
instead of the default ones (cool, quiet, balanced, performance);
- Profile switching works correctly;
- About 4% increase in FPS using benchmark Cyberpunk 2077 on
performance profile;
- No noticeable regressions.
Signed-off-by: Victor Lattaro Volpini <victorlattaro@proton.me>
Link: https://patch.msgid.link/20260210000048.250280-1-victorlattaro@proton.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo ThinkPad X1 Fold 16 Gen 1 has physical volume up/down
buttons that are handled through the intel-hid 5-button array
interface. The firmware does not advertise 5-button array support via
HEBC, so the driver relies on a DMI allowlist to enable it.
Add the ThinkPad X1 Fold 16 Gen 1 to the button_array_table so the
volume buttons work out of the box.
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260210085625.34380-1-diamondback@cohunt.app
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo ThinkPad X1 Fold 16 Gen 1 has an OV5675 sensor (ACPI HID
OVTI5675) behind an INT3472 discrete PMIC controller. The INT3472
_DSM returns GPIO type 0x10 for one of the pins, which controls the
DOVDD (digital I/O power) regulator enable.
Type 0x10 is not currently handled by the driver, causing the GPIO to
be ignored with a warning. Add INT3472_GPIO_TYPE_DOVDD (0x10) and
handle it as a regulator with con_id "dovdd" to match the supply name
used by sensor drivers (e.g. ov5675).
Also increase GPIO_SUPPLY_NAME_LENGTH from 5 to 6 to accommodate
the "dovdd" name (5 chars + null terminator).
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260210132129.17943-1-diamondback@cohunt.app
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model G733QS.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260211212659.16542-1-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Dell 14 Plus 2-in-1 (model DB04250) requires the VGBS allow list
entry to correctly enable the tablet mode switch. Without this, the
chassis state is not reported, and the hinge rotation only emits
unknown scancodes.
Verified on Dell 14 Plus 2-in-1 DB04250.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221090
Signed-off-by: Peter Metz <peter.metz@unarin.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260213044627.203638-1-peter.metz@unarin.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Check whether the battery supports the relevant charge threshold before
reading the value to silence these errors:
thinkpad_acpi: acpi_evalf(BCTG, dd, ...) failed: AE_NOT_FOUND
ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCTG: evaluate failed
thinkpad_acpi: acpi_evalf(BCSG, dd, ...) failed: AE_NOT_FOUND
ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCSG: evaluate failed
when reading the charge thresholds via sysfs on platforms that do not
support them such as the ThinkPad T400.
Fixes: 2801b9683f ("thinkpad_acpi: Add support for battery thresholds")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202619
Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/MI0P293MB01967B206E1CA6F337EBFB12926CA@MI0P293MB0196.ITAP293.PROD.OUTLOOK.COM
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-wf0xxx (board ID: 8BAB) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to HP Omen 16-wf1xxx, board ID: 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on HP Omen 16-wf0xxx confirmed that platform profile is
registered successfully and fan RPMs are readable and controllable.
Suggested-by: Noah Provenzano <noahpro@gmail.com>
Tested-by: Juan Martin Morales <juanm4morales@gmail.com>
Reported-by: Juan Martin Morales <juanm4morales@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220639
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260216072003.90151-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The touchscreen on the SUPI S10 tablet reports inverted Y coordinates,
causing touch input to be mirrored vertically relative to the display.
Add a quirk to set the "touchscreen-inverted-y" boolean device-property
on the touchscreen device, so that the goodix_ts driver will fixup
the coordinates.
Reported-by: Yajat Kumar <yajatapps3@gmail.com>
Closes: https://lore.kernel.org/linux-input/20251230221639.582406-1-yajatapps3@gmail.com/
Tested-by: Yajat Kumar <yajatapps3@gmail.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260217132346.34535-1-johannes.goede@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-xd0xxx (board ID: 8BCD) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to HP Omen 16-wf1xxx, board ID: 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on HP Omen 16-xd0xxx confirmed that platform profile is
registered successfully and fan RPMs are readable and controllable.
Tested-by: Varad Amol Pisale <varadpisale.work@gmail.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260218050235.94687-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
amd/pmf:
- Added a module parameter to disable the Smart PC function
- Introduce new interface to export NPU metrics
- Prevent TEE errors after hibernate
- Use ring buffer to store custom BIOS input values
amd:
- Use scope-based cleanup for wbrf_record()
asus-wmi:
- add keyboard brightness event handler
- Add support for multiple kbd led handlers
- remove unused keyboard backlight quirk
crypto:
- ccp - Add an S4 restore flow
- ccp - Declare PSP dead if PSP_CMD_TEE_RING_INIT fails
- ccp - Factor out ring destroy handling to a helper
- ccp - Send PSP_CMD_TEE_RING_DESTROY when PSP_CMD_TEE_RING_INIT fails
HID: asus:
- add support for the asus-wmi brightness handler
- early return for ROG devices
- fortify keyboard handshake
- initialize additional endpoints only for certain devices
- listen to the asus-wmi brightness device instead of creating one
- move vendor initialization to probe
- simplify RGB init sequence
- use same report_id in response
hp-wmi:
- Add EC offsets to read Victus S thermal profile
- add manual fan control for Victus S models
- fix platform profile values for Omen 16-wf1xxx
- implement fan keep-alive
- order include headers
ideadpad-laptop:
- Clean up style warnings and checks
intel/pmc:
- Change LPM mode fields to u8
- Enable substate residencies for multiple PMCs
- Move LPM mode attributes to PMC
- Remove double empty line
intel/pmt:
- Replace sprintf() with sysfs_emit()
intel/uncore-freq:
- Replace sprintf() with scnprintf()
- Replace sprintf() with sysfs_emit()
intel-wmi-sbl-fw-update:
- Use new buffer-based WMI API
intel/wmi: thunderbolt:
- Use new buffer-based WMI API
ISST:
- Add missing write block check
- Check for admin capability for write commands
- Optimize suspend/resume callbacks
- Store and restore all domains data
lenovo-wmi-capdata:
- Add support for Capability Data 00
- Add support for Fan Test Data
lenovo-wmi-{capdata,other}:
- Fix HWMON channel visibility
- Support multiple Capability Data
lenovo-wmi-capdata:
- Wire up Fan Test Data
lenovo-wmi-helpers:
- Convert returned buffer into u32
lenovo-wmi-other:
- Add HWMON for fan reporting/tuning
mlx-platform:
- Add support DGX flavor of next-generation 800GB/s ethernet switch.
- Add support for new Nvidia DGX system based on class VMOD0010
Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata:
- Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata
surface: aggregator_registry:
- Add Surface Pro 11 (QCOM)
surface:
- Replace deprecated strcpy() in surface_button_add()
thinkpad_acpi:
- Add support to detect hardware damage detection capability.
- Add sysfs to display details of damaged device.
tools/power/x86/intel-speed-select:
- Allow non root users
- Fix file descriptor leak in isolate_cpus()
- Use pkg-config for libnl-3.0 detection
- v1.25 release
uniwill:
- Implement cTGP setting
uniwill-laptop:
- Introduce device descriptor system
wmi:
- Add helper functions for WMI string conversions
- Add kunit test for the marshalling code
- Add kunit test for the string conversion code
wmi-bmof:
- Use new buffer-based WMI API
wmi:
- Introduce marshalling support
wmi: string-kunit:
- Add missing oversized string test case
wmi:
- Update driver development guide
xiaomi-wmi:
- Use new buffer-based WMI API
yogabook:
- Clean up code style
Merges:
- Merge branch 'fixes' of into for-next
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into for-next
- Merge branch 'platform-drivers-x86-asus-kbd' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaY9soAAKCRBZrE9hU+XO
MT5EAP9aK1wHlVGDfuC2k07X4gk8ZX5Ks9anXJlBcZFrpC9okwD5Aeqj3XLK338x
g5k/x+r87GwXjcBLnFi2TnNA2c8SWQY=
=eGAm
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
- Add the missing IRQF_COND_ONESHOT flag to devm_request_irq()
This is inconsistent vs. request_irq() and causes the same issues which
where addressed with the introduction of this flag
- Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage
Quite some drivers have inconsistent interrupt request flags related to
interrupt threading namely IRQF_ONESHOT and IRQF_NO_THREAD. This leads to
warnings and/or malfunction when forced interrupt threading is enabled.
- Remove stub primary (hard interrupt) handlers
A bunch of drivers implement a stub primary (hard interrupt) handler which
just returns IRQ_WAKE_THREAD. The same functionality is provided by the
core code when the primary handler argument of request_thread_irq() is set
to NULL.
-----BEGIN PGP SIGNATURE-----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=vrmm
-----END PGP SIGNATURE-----
Merge tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A series of treewide cleanups to ensure interrupt request consistency.
- Add the missing IRQF_COND_ONESHOT flag to devm_request_irq()
This is inconsistent vs request_irq() and causes the same issues
which where addressed with the introduction of this flag
- Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage
Quite some drivers have inconsistent interrupt request flags
related to interrupt threading namely IRQF_ONESHOT and
IRQF_NO_THREAD. This leads to warnings and/or malfunction when
forced interrupt threading is enabled.
- Remove stub primary (hard interrupt) handlers
A bunch of drivers implement a stub primary (hard interrupt)
handler which just returns IRQ_WAKE_THREAD. The same functionality
is provided by the core code when the primary handler argument of
request_thread_irq() is set to NULL"
* tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
media: pci: mg4b: Use IRQF_NO_THREAD
mfd: wm8350-core: Use IRQF_ONESHOT
thermal/qcom/lmh: Replace IRQF_ONESHOT with IRQF_NO_THREAD
rtc: amlogic-a4: Remove IRQF_ONESHOT
usb: typec: fusb302: Remove IRQF_ONESHOT
EDAC/altera: Remove IRQF_ONESHOT
char: tpm: cr50: Remove IRQF_ONESHOT
ARM: versatile: Remove IRQF_ONESHOT
scsi: efct: Use IRQF_ONESHOT and default primary handler
Bluetooth: btintel_pcie: Use IRQF_ONESHOT and default primary handler
bus: fsl-mc: Use default primary handler
mailbox: bcm-ferxrm-mailbox: Use default primary handler
iommu/amd: Use core's primary handler and set IRQF_ONESHOT
platform/x86: int0002: Remove IRQF_ONESHOT from request_irq()
genirq: Set IRQF_COND_ONESHOT in devm_request_irq().
The LWMI_SUPP_MAY_{GET,SET} macros are fundamentally broken. When I
introduced them, I meant to check LWMI_SUPP_VALID *and* the
corresponding bits for get/set capabilities. However, `supported &
LWMI_SUPP_MAY_{GET,SET}' means *or*, so it accidentally passes the check
when LWMI_SUPP_VALID is set.
Fix them by only including the corresponding get/set bit without
LWMI_SUPP_VALID. Meanwhile, rename them to LWMI_SUPP_{GET,SET} to make
them less confusing.
Fixes: 67d9a39ce8 ("platform/x86: lenovo-wmi-capdata: Wire up Fan Test Data")
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260207172327.80111-1-i@rong.moe
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions (Jose
Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing that
under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and unnecessary
memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and PNP0C02
("system resource") device objects directly instead of letting the
legacy PNP system driver handle them to avoid device enumeration
issues on systems where PNP0C02 is present in the _CID list under
ACPI device objects with a _HID matching a proper device driver in
Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device objects
using it as a _HID for board development and similar purposes (Kartik
Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers directly
to ACPI device objects is not a good idea in general and why it is
desirable to convert drivers doing so into proper platform drivers
that use struct platform_driver for device binding (Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI device
driver, the generic ACPI button drivers, the generic ACPI thermal
zone driver, the ACPI hardware event device (HED) driver, the ACPI EC
driver, the ACPI SMBUS HC driver, the ACPI Smart Battery Subsystem
(SBS) driver, and the ACPI backlight (video) driver to proper platform
drivers that use struct platform_driver for device binding (Rafael
Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video) driver
to evaluate _ADR instead of evaluating that object directly (Andy
Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on systems
with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary overhead
in the NMI handler by carrying out all of the requisite preparations
and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmmErOoSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1wCoH/iWkTc5/kTTmzi5Urh9lsUsOL8Oc9hrx
KlH4XdLf9TUUSGPJtPRrrtXiOotNUSaZpg2ULktJAZHxDWXnA83DO0FjwT3+2WbH
/5YGVEK24Sae+DI38ukEvOI6bXrxxqNPLnFRtvV7tclUJD2OEAdKcUd8Y98s9qNf
64bf2gKoQtbZj0eM33KHiotULYZUNoZ2SWKFAWXzKQr7EOkcQGKcuupeStgQ04Id
uumWr+lIgW5vYPOcPFCufE3+LM0MzDvruxBlMJQEJJFVkY4IEFwwJNGW/lo8hgE3
74pFKqOPhYsIFPM8rtKXS+JmjP22iCI49QjnHIsQdDG03GEKvKFFeCw=
=CG0j
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"This one is significantly larger than previous ACPI support pull
requests because several significant updates have coincided in it.
First, there is a routine ACPICA code update, to upstream version
20251212, but this time it covers new ACPI 6.6 material that has not
been covered yet. Among other things, it includes definitions of a few
new ACPI tables and updates of some others, like the GICv5 MADT
structures and ARM IORT IWB node definitions that are used for adding
GICv5 ACPI probing on ARM (that technically is IRQ subsystem material,
but it depends on the ACPICA changes, so it is included here). The
latter alone adds a few hundred lines of new code.
Second, there is an update of ACPI _OSC handling including a fix that
prevents failures from occurring in some corner cases due to careless
handling of _OSC error bits.
On top of that, the "system resource" ACPI device objects with the
PNP0C01 and PNP0C02 are now going to be handled by the ACPI core
device enumeration code instead of handing them over to the legacy PNP
system driver which causes device enumeration issues to occur. Some of
those issues have been worked around in device drivers and elsewhere
and those workarounds should not be necessary any more, so they are
going away.
Moreover, the time has come to convert all "core ACPI" device drivers
that were still using struct acpi_driver objects for device binding
into proper platform drivers that use struct platform_driver for this
purpose. These updates are accompanied by some requisite core ACPI
device enumeration code changes.
Next, there are ACPI APEI updates, including changes to avoid excess
overhead in the NMI handler and in SEA on the ARM side, changes to
unify ACPI-based HW error tracing and logging, and changes to prevent
APEI code from reaching out of its allocated memory.
There are also some ACPI power management updates, mostly related to
the ACPI cpuidle support in the processor driver, suspend-to-idle
handling on systems with ACPI support and to ACPI PM of devices.
In addition to the above, bugs are fixed and the code is cleaned up in
assorted places all over.
Specifics:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin
Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions
(Jose Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing
that under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and
unnecessary memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and
PNP0C02 ("system resource") device objects directly instead of
letting the legacy PNP system driver handle them to avoid device
enumeration issues on systems where PNP0C02 is present in the _CID
list under ACPI device objects with a _HID matching a proper device
driver in Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device
objects using it as a _HID for board development and similar
purposes (Kartik Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
- Add a piece of documentation explaining why binding drivers
directly to ACPI device objects is not a good idea in general and
why it is desirable to convert drivers doing so into proper
platform drivers that use struct platform_driver for device binding
(Rafael Wysocki)
- Convert multiple "core ACPI" drivers, including the NFIT ACPI
device driver, the generic ACPI button drivers, the generic ACPI
thermal zone driver, the ACPI hardware event device (HED) driver,
the ACPI EC driver, the ACPI SMBUS HC driver, the ACPI Smart
Battery Subsystem (SBS) driver, and the ACPI backlight (video)
driver to proper platform drivers that use struct platform_driver
for device binding (Rafael Wysocki)
- Use acpi_get_local_u64_address() in the ACPI backlight (video)
driver to evaluate _ADR instead of evaluating that object directly
(Andy Shevchenko)
- Convert the generic ACPI battery driver to a proper platform driver
using struct platform_driver for device binding (Rafael Wysocki)
- Fix incorrect charging status when current is zero in the generic
ACPI battery driver (Ata İlhan Köktürk)
- Use LIST_HEAD() for initializing a stack-allocated list in the
generic ACPI watchdog device driver (Can Peng)
- Rework the ACPI idle driver initialization to register it directly
from the common initialization code instead of doing that from a
CPU hotplug "online" callback and clean it up (Huisong Li, Rafael
Wysocki)
- Fix a possible NULL pointer dereference in
acpi_processor_errata_piix4() (Tuo Li)
- Make read-only array non_mmio_desc[] static const (Colin Ian King)
- Prevent the APEI GHES support code on ARM from accessing memory out
of bounds or going past the ARM processor CPER record buffer (Mauro
Carvalho Chehab)
- Prevent cper_print_fw_err() from dumping the entire memory on
systems with defective firmware (Mauro Carvalho Chehab)
- Improve ghes_notify_nmi() status check to avoid unnecessary
overhead in the NMI handler by carrying out all of the requisite
preparations and the NMI registration time (Tony Luck)
- Refactor the GHES driver by extracting common functionality into
reusable helper functions to reduce code duplication and improve
the ghes_notify_sea() status check in analogy with the previous
ghes_notify_nmi() status check improvement (Shuai Xue)
- Make ELOG and GHES log and trace consistently and support the CPER
CXL protocol analogously (Fabio De Francesco)
- Disable KASAN instrumentation in the APEI GHES driver when compile
testing with clang < 18 (Nathan Chancellor)
- Let ghes_edac be the preferred driver to load on __ZX__ and _BYO_
systems by extending the platform detection list in the APEI GHES
driver (Tony W Wang-oc)
- Clean up cppc_perf_caps and cppc_perf_ctrls structs and rename EPP
constants for clarity in the ACPI CPPC library (Sumit Gupta)"
* tag 'acpi-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (117 commits)
ACPI: battery: fix incorrect charging status when current is zero
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: APEI: GHES: Add ghes_edac support for __ZX__ and _BYO_ systems
ACPI: APEI: GHES: Disable KASAN instrumentation when compile testing with clang < 18
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: CPPC: Rename EPP constants for clarity
ACPI: CPPC: Clean up cppc_perf_caps and cppc_perf_ctrls structs
ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_dev() to void
ACPI: processor: idle: Convert acpi_processor_setup_cpuidle_states() to void
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
ACPI: PCI: simplify code with acpi_get_local_u64_address()
ACPI: video: simplify code with acpi_get_local_u64_address()
ACPI: PM: Adjust messages regarding postponed ACPI PM
...
Merge ACPI support updates related to _OSC evaluation, the handling of
"system resource" device objects, and ACPI-based device enumeration
for 6.20-rc1/7.0-rc1:
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and unnecessary
memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and PNP0C02
("system resource") device objects directly instead of letting the
legacy PNP system driver handle them to avoid device enumeration
issues on systems where PNP0C02 is present in the _CID list under
ACPI device objects with a _HID matching a proper device driver in
Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device objects
using it as a _HID for board development and similar purposes (Kartik
Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
* acpi-bus:
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: bus: Align acpi_device_get_match_data() with driver match order
ACPI: scan: Drop outdated comment regarding removed function
ACPI: scan: Use resource_type() for resource type checking
ACPI: bus: Fix typo under sizeof() in acpi_run_osc()
ACPI: bus: Adjust acpi_osc_handshake() parameter list
ACPI: bus: Rework the handling of \_SB._OSC USB4 features
ACPI: bus: Adjust feature mask creation for \_SB._OSC
ACPI: bus: Rework the handling of \_SB._OSC platform features
ACPI: bus: Rename label and use ACPI_FREE() in acpi_run_osc()
ACPI: bus: Split _OSC error processing out of acpi_run_osc()
ACPI: bus: Split _OSC evaluation out of acpi_run_osc()
ACPI: bus: Rework printing debug messages on _OSC errors
ACPI: bus: Fix handling of _OSC errors in acpi_run_osc()
ACPI: PNP: Drop acpi_nonpnp_device_ids[]
platform/x86/intel/vbtn: Stop creating a platform device
platform/x86/intel/hid: Stop creating a platform device
ACPI: PNP: Drop PNP0C01 and PNP0C02 from acpi_pnp_device_ids[]
Passing IRQF_ONESHOT ensures that the interrupt source is masked until the
secondary (threaded) handler is done. If only a primary handler is used
then the flag makes no sense because the interrupt cannot fire (again)
while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
The flag was added to match the flag on the shared handler which uses a
threaded handler and therefore IRQF_ONESHOT. This is no longer needed
because devm_request_irq() now passes IRQF_COND_ONESHOT for this case.
Revert adding IRQF_ONESHOT to irqflags.
Fixes: 8f812373d1 ("platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-3-bigeasy@linutronix.de
Closes: https://lore.kernel.org/all/555f1c56-0f74-41bf-8bd2-6217e0aab0c6@intel.com
The file sys/kernel/debug/tpmi-<n>/plr/domain<n>/status has store and show
callbacks. Make it writeable.
Fixes: 811f67c516 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://patch.msgid.link/20260127-plr-debugfs-write-v1-1-1fffbc370b1e@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The current implementation for Victus S thermal profiles only supports
setting the profile. The driver was missing the logic to read the
hardware state, meaning it would default to "Balanced" on driver load,
overriding the currently active profile. Furthermore, the driver could
not detect if the firmware reset the profile on a power source change.
Statically store the known EC offsets for reading thermal profile in the
new .ec_tp_offset field of struct thermal_profile_params. Implement
platform_profile_victus_s_get_ec() to use this offset to read the real
hardware state. Additionally, update the power source event notifier to
use the actual hardware state when re-triggering CPU power limits
actualization.
Testing on HP Omen 16-wf1xxx (board ID 8C78) confirmed that the thermal
profile is now persistent across driver loads and power source change
events.
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260121182858.66363-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In a few places in the Classmate laptop driver, code using the accel
object may run before that object's address is stored in the driver
data of the input device using it.
For example, cmpc_accel_sensitivity_store_v4() is the "show" method
of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(),
before calling dev_set_drvdata() for inputdev->dev. If the sysfs
attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev)
call in in cmpc_accel_sensitivity_store_v4() returns NULL which
leads to a NULL pointer dereference going forward.
Moreover, sysfs attributes using the input device are added before
initializing that device by cmpc_add_acpi_notify_device() and if one
of them is accessed before running that function, a NULL pointer
dereference will occur.
For example, cmpc_accel_sensitivity_attr_v4 is added before calling
cmpc_add_acpi_notify_device() and if it is read prematurely, the
dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4()
returns NULL which leads to a NULL pointer dereference going forward.
Fix this by adding NULL pointer checks in all of the relevant places.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12825381.O9o76ZdvQC@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The keyboard brightness control of Asus WMI keyboards is handled in
kernel, which leads to the shortcut going from brightness 0, to 1,
to 2, and 3.
However, for HID keyboards it is exposed as a key and handled by the
user's desktop environment. For the toggle button, this means that
brightness control becomes on/off. In addition, in the absence of a
DE, the keyboard brightness does not work.
Therefore, expose an event handler for the keyboard brightness control
which can then be used by hid-asus. Since this handler is called from
an interrupt context, defer the actual work to a workqueue.
In the process, introduce ASUS_EV_MAX_BRIGHTNESS to hold the constant
for maximum brightness since it is shared between hid-asus/asus-wmi.
Reviewed-by: Luke D. Jones <luke@ljones.dev>
Tested-by: Luke D. Jones <luke@ljones.dev>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260122075044.5070-11-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some devices, such as the Z13 have multiple Aura devices connected
to them by USB. In addition, they might have a WMI interface for
RGB. In Windows, Armoury Crate exposes a unified brightness slider
for all of them, with 3 brightness levels.
Therefore, to be synergistic in Linux, and support existing tooling
such as UPower, allow adding listeners to the RGB device of the WMI
interface. If WMI does not exist, lazy initialize the interface.
Since hid-asus and asus-wmi can both interact with the led objects
including from an atomic context, protect the brightness access with a
spinlock and update the values from a workqueue. Use this workqueue to
also process WMI keyboard events, so they are handled asynchronously.
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Reviewed-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20260122075044.5070-8-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The MECHREVO Wujie 15X Pro suffers from spurious IRQ issues related to
the AMD PMC. Add it to the quirk list to use the spurious_8042 fix.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-4-550230171hxy@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The PSS telemetry info parsing incorrectly applies
TELEM_INFO_SRAMEVTS_MASK when extracting event register
count from firmware response. This reads bits 15-8 instead
of the correct bits 7-0, causing misdetection of hardware
capabilities.
The IOSS path correctly uses TELEM_INFO_NENABLES_MASK for
register count. Apply the same mask to PSS parsing for
consistency.
Fixes: 9d16b482b0 ("platform:x86: Add Intel telemetry platform driver")
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251224061144.3925519-1-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The LTR blocking statistics and wakeup event counters are incorrectly
cross-referenced during debugfs output rendering. The code populates
pss_ltr_blkd[] with LTR blocking data and pss_s0ix_wakeup[] with wakeup
data, but the display loops reference the wrong arrays.
This causes the "LTR Blocking Status" section to print wakeup events
and the "Wakes Status" section to print LTR blockers, misleading power
management analysis and S0ix residency debugging.
Fix by aligning array usage with the intended output section labels.
Fixes: 87bee29099 ("platform:x86: Add Intel Telemetry Debugfs interfaces")
Cc: stable@vger.kernel.org
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251224032053.3915900-1-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
