This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Both the RPM_BUS_MASTER_REQ and the RPM_BUS_SLAVE_REQ constants are
also defined in the 'icc-rpm.h' header.
$ git grep -nHE 'define[[:blank:]]+RPM_BUS_MASTER_REQ[[:blank:]]'
drivers/interconnect/qcom/icc-rpm.h:16:#define RPM_BUS_MASTER_REQ 0x73616d62
drivers/interconnect/qcom/msm8974.c:176:#define RPM_BUS_MASTER_REQ 0x73616d62
$ git grep -nHE 'define[[:blank:]]+RPM_BUS_SLAVE_REQ[[:blank:]]'
drivers/interconnect/qcom/icc-rpm.h:17:#define RPM_BUS_SLAVE_REQ 0x766c7362
drivers/interconnect/qcom/msm8974.c:177:#define RPM_BUS_SLAVE_REQ 0x766c7362
Drop the local defines to avoid the duplications.
No functional changes intended. Compile tested only.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260122-icc-qcom-dupe-defines-v1-2-eea876c2d98f@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The 'linux/soc/qcom/smd-rpm.h' header defines QCOM_RPM_SMD_KEY_RATE
with the exact same value.
$ git grep -nHE 'define[[:blank:]]+QCOM_RPM_SMD_KEY_RATE[[:blank:]]'
drivers/interconnect/qcom/smd-rpm.c:17:#define QCOM_RPM_SMD_KEY_RATE 0x007a484b
include/linux/soc/qcom/smd-rpm.h:52:#define QCOM_RPM_SMD_KEY_RATE 0x007a484b
Drop the local define to avoid the duplication.
No functional changes intended. Compile tested only.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260122-icc-qcom-dupe-defines-v1-1-eea876c2d98f@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The qxm_nsp node is configured with an incorrect num_links value,
causing remoteproc driver to fail probing because it cannot acquire the
interconnect path for qxm_nsp -> ebi. This results in the following
error in dmesg:
platform 26300000.remoteproc: deferred probe pending:
qcom_q6v5_pas: failed to acquire interconnect path
Set num_links to 2 to match the two link_nodes, allowing remoteproc
clients to obtain the correct path handle and vote on qxm_nsp -> ebi.
Fixes: 874be3339c ("interconnect: qcom: qcs8300: convert to dynamic IDs")
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260120-monaco_num_links_fix_nsp_ebi_path-v3-1-536be21ce3ff@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This series is a combination of binding changes, driver cleanups and new
driver code to enable the interconnect on the MediaTek MT8196 SoC.
* icc-mtk
dt-bindings: interconnect: mt8183-emi: Add support for MT8196 EMI
interconnect: mediatek: Add support for MediaTek MT8196 EMI ICC
interconnect: mediatek: Don't hijack parent device
interconnect: mediatek: Aggregate bandwidth with saturating add
Link: https://lore.kernel.org/r/20251124-mt8196-dvfsrc-v2-0-d9c1334db9f3@collabora.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The interconnect framework currently lacks in-tree unit tests to verify
the core logic in isolation. This makes it difficult to validate
regression stability when modifying the provider/consumer APIs or
aggregation logic.
Introduce a kunit test suite that verifies the fundamental behavior of
the subsystem. The tests cover:
- Provider API (node creation, linking, topology construction).
- Consumer API (path enabling/disabling, bandwidth requests).
- Standard aggregation logic (accumulating bandwidth across links).
- Bulk operations for setting bandwidth on multiple paths.
The suite simulates a simple SoC topology with multiple masters and a
shared bus to validate traffic aggregation behavior in a controlled
software environment, without requiring specific hardware or Device
Tree support.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20260110184309.906735-1-visitorckw@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The debugfs_create_str() API assumes that the string pointer is either NULL
or points to valid kmalloc() memory. Leaving the pointer uninitialized can
cause problems.
Initialize src_node and dst_node to empty strings before creating the
debugfs entries to guarantee that reads and writes are safe.
Fixes: 770c69f037 ("interconnect: Add debugfs test client")
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20260109122523.125843-1-djakov@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
By using a regular non-overflow-checking add, the MediaTek icc-emi
driver will happy wrap at U32_MAX + 1 to 0. As it's common for the
interconnect core to fill in INT_MAX values, this is not a hypothetical
situation, but something that actually happens in regular use. This
would be pretty disasterous if anything used this driver.
Replace the addition with an overflow-checked addition from overflow.h,
and saturate to U32_MAX if an overflow is detected.
Fixes: b45293799f ("interconnect: mediatek: Add MediaTek MT8183/8195 EMI Interconnect driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20251124-mt8196-dvfsrc-v2-13-d9c1334db9f3@collabora.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
If the intention is that users of the interconnect declare their
relationship to the child icc_emi node of the dvfsrc controller, then
this code never worked. That's because it uses the parent dvfsrc device
as the device it passes to the interconnect core framework, which means
all the OF parsing is broken.
Use the actual device instead, and pass the dvfsrc parent into the
dvfsrc calls.
Fixes: b45293799f ("interconnect: mediatek: Add MediaTek MT8183/8195 EMI Interconnect driver")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20251124-mt8196-dvfsrc-v2-12-d9c1334db9f3@collabora.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add a new driver with data to register the External Memory
Interface (EMI) Interconnect on the MediaTek MT8196 Chromebook
SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20251124-mt8196-dvfsrc-v2-11-d9c1334db9f3@collabora.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Enable QoS configuration for master ports with predefined values for
priority and urgency forwarding.
While this does require some "clocks" to be specified in devicetree to
work correctly, thanks to ".qos_requires_clocks = true," this is
backwards compatible with old DT as QoS programming will be skipped for
aggre1_noc and aggre2_noc when clocks are not provided.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-4-6af348cb9c69@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Since commit 57eb14779d ("interconnect: qcom: icc-rpmh: Support child
NoC device probe") the icc-rpmh driver supports initializing child NoCs,
but those child NoCs also need to be able to get the parent's regmap in
order to enable QoS.
Change the driver to support that and support programming QoS register.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-2-6af348cb9c69@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Now as all RPMh interconnect drivers were converted to using the dynamic
IDs, drop support for non-dynamic ID allocation.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-25-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-24-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8650
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-23-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8550
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-22-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-21-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-20-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-19-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-18-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-17-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-16-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-15-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-14-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-13-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-12-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-11-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-10-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-9-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-8-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-7-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-6-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-5-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-4-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-3-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stop using fixed and IDs and covert the platform to use dynamic IDs for
the interconnect. This gives more flexibility and also allows us to drop
the .num_links member, saving from possible errors related to it being
not set or set incorrectly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-2-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Declaring link_nodes as a double-pointer results in a syntax sugar in
the interconnect driver to typecast the array. Change the type of
link_nodes field to the array to remove the need for the extra typecast.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-rework-icc-v3-1-0575304c9624@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add driver for the Qualcomm interconnect buses found in Kaanapali
based platforms. The topology consists of several NoCs that are
controlled by a remote processor that collects the aggregated
bandwidth for each master-slave pairs.
Co-developed-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-knp-interconnect-v4-2-568bba2cb3e5@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This enables QoS configuration for QNOC type device which can be found
on SA8775P platform. It enables QoS configuration for master ports with
predefined priority and urgency forwarding. This helps in prioritizing
the traffic originating from different interconnect masters at NOC.
The system may function normally without this feature. However, enabling
QoS helps optimize latency and bandwidth across subsystems like CPU, GPU,
and multimedia engines, which becomes important in high-throughput
scenarios. This is a feature aimed at performance enhancement to improve
system performance under concurrent workloads.
* icc-sa8775p
dt-bindings: interconnect: add reg and clocks properties to enable QoS on sa8775p
interconnect: qcom: sa8775p: enable QoS configuration
Link: https://lore.kernel.org/r/20251001073344.6599-1-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Drop the QPIC interconnect and BCM nodes for the SDX75 SoC. The reason
is that this QPIC BCM resource is already defined as a RPMh clock in
clk-rpmh driver as like other SDX SoCs. So it is wrong to describe the
same resource in two different providers.
Also, without this series, the NAND driver fails to probe on SDX75 as
the interconnect sync state disables the QPIC nodes as there were no
clients voting for this ICC resource. However, the NAND driver had already
voted for this BCM resource through the clk-rpmh driver. Since both votes
come from Linux, RPMh was unable to distinguish between these two and ends
up disabling the resource during sync state.
* icc-sdx75
interconnect: qcom: sdx75: Drop QPIC interconnect and BCM nodes
dt-bindings: interconnect: qcom: Drop QPIC_CORE IDs
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-0-20d6820e455c@oss.qualcomm.com>
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The lack of the interconnects for the USB2 host might result in the
register writes for the PHY not reaching the PHY and thus the PLL not
locking up, resulting in -EBUSY errors for the USB host on the platform.
Add missing interconnect link and add interconnect paths to the USB2
device.
* icc-msm8996
interconnect: qcom: msm8996: add missing link to SLAVE_USB_HS
arm64: dts: qcom: msm8996: add interconnect paths to USB2 controller
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-0-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The icc_commit_set() function, used by the debugfs interface, checks
the validity of the global cur_path pointer using IS_ERR_OR_NULL().
However, in the specific case where cur_path is NULL, while
IS_ERR_OR_NULL(NULL) correctly evaluates to true, the subsequent call
to PTR_ERR(NULL) returns 0.
This causes the function to return a success code (0) instead of an
error, misleading the user into believing their bandwidth request was
successfully committed when, in fact, no operation was performed.
Fix this by adding an explicit check to return -EINVAL if cur_path is
NULL. This prevents silent failures and ensures that an invalid
operational sequence is immediately and clearly reported as an error.
Fixes: 770c69f037 ("interconnect: Add debugfs test client")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20251010151447.2289779-1-visitorckw@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
As like other SDX SoCs, SDX75 SoC's QPIC BCM resource was modeled as a
RPMh clock in clk-rpmh driver. However, for SDX75, this resource was also
described as an interconnect and BCM node mistakenly. It is incorrect to
describe the same resource in two different providers, as it will lead to
votes from clients overriding each other.
Hence, drop the QPIC interconnect and BCM nodes and let the clients use
clk-rpmh driver to vote for this resource.
Without this change, the NAND driver fails to probe on SDX75, as the
interconnect sync state disables the QPIC nodes as there were no clients
voting for this ICC resource. However, the NAND driver had already voted
for this BCM resource through the clk-rpmh driver. Since both votes come
from Linux, RPMh was unable to distinguish between these two and ends up
disabling the QPIC resource during sync state.
Cc: stable@vger.kernel.org
Fixes: 3642b4e5cb ("interconnect: qcom: Add SDX75 interconnect provider driver")
Signed-off-by: Raviteja Laggyshetty <quic_rlaggysh@quicinc.com>
[mani: dropped the reference to bcm_qp0, reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Link: https://lore.kernel.org/r/20250926-sdx75-icc-v2-1-20d6820e455c@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
