Three initial kernel mapping fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaayE4AAKCRD3ErUQojoP
X4U4AQDtHPc9nlM3areu5yTQnOcPTExuEoIpvBm9ktwNCdrwCgEAt4tqv3hhxCvG
/lwb6XBCHfyw3d/AsTRbOIH1MGCnaQQ=
=itGt
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"While testing Sasha Levin's 'kallsyms: embed source file:line info in
kernel stack traces' patch series, which increases the typical kernel
image size, I found some issues with the parisc initial kernel mapping
which may prevent the kernel to boot.
The three small patches here fix this"
* tag 'parisc-for-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix initial page table creation for boot
parisc: Check kernel mapping earlier at bootup
parisc: Increase initial mapping to 64 MB with KALLSYMS
The KERNEL_INITIAL_ORDER value defines the initial size (usually 32 or
64 MB) of the page table during bootup. Up until now the whole area was
initialized with PTE entries, but there was no check if we filled too
many entries. Change the code to fill up with so many entries that the
"_end" symbol can be reached by the kernel, but not more entries than
actually fit into the initial PTE tables.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
The check if the initial mapping is sufficient needs to happen much
earlier during bootup. Move this test directly to the start_parisc()
function and use native PDC iodc functions to print the warning, because
panic() and printk() are not functional yet.
This fixes boot when enabling various KALLSYSMS options which need
much more space.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
The 32MB initial kernel mapping can become too small when CONFIG_KALLSYMS
is used. Increase the mapping to 64 MB in this case.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3e ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f210913 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Everything:
Total patches: 325
Reviews/patch: 1.39
Reviewed rate: 72%
Excluding DAMON:
Total patches: 262
Reviews/patch: 1.63
Reviewed rate: 82%
Excluding DAMON and zram:
Total patches: 248
Reviews/patch: 1.72
Reviewed rate: 86%
- The 14 patch series "powerpc/64s: do not re-activate batched TLB
flush" from Alexander Gordeev makes arch_{enter|leave}_lazy_mmu_mode()
nest properly.
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- The 7 patch series "zram: introduce compressed data writeback" from
Richard Chang and Sergey Senozhatsky implements data compression for
zram writeback.
- The 8 patch series "mm: folio_zero_user: clear page ranges" from David
Hildenbrand adds clearing of contiguous page ranges for hugepages.
Large improvements during demand faulting are demonstrated.
- The 2 patch series "memcg cleanups" from Chen Ridong tideis up some
memcg code.
- The 12 patch series "mm/damon: introduce {,max_}nr_snapshots and
tracepoint for damos stats" from SeongJae Park improves DAMOS stat's
provided information, deterministic control, and readability.
- The 3 patch series "selftests/mm: hugetlb cgroup charging: robustness
fixes" from Li Wang fixes a few issues in the hugetlb cgroup charging
selftests.
- The 5 patch series "Fix va_high_addr_switch.sh test failure - again"
from Chunyu Hu addresses several issues in the va_high_addr_switch test.
- The 5 patch series "mm/damon/tests/core-kunit: extend existing test
scenarios" from Shu Anzai improves the KUnit test coverage for DAMON.
- The 2 patch series "mm/khugepaged: fix dirty page handling for
MADV_COLLAPSE" from Shivank Garg fixes a glitch in khugepaged which was
causing madvise(MADV_COLLAPSE) to transiently return -EAGAIN.
- The 29 patch series "arch, mm: consolidate hugetlb early reservation"
from Mike Rapoport reworks and consolidates a pile of straggly code
related to reservation of hugetlb memory from bootmem and creation of
CMA areas for hugetlb.
- The 9 patch series "mm: clean up anon_vma implementation" from Lorenzo
Stoakes cleans up the anon_vma implementation in various ways.
- The 3 patch series "tweaks for __alloc_pages_slowpath()" from
Vlastimil Babka does a little streamlining of the page allocator's
slowpath code.
- The 8 patch series "memcg: separate private and public ID namespaces"
from Shakeel Butt cleans up the memcg ID code and prevents the
internal-only private IDs from being exposed to userspace.
- The 6 patch series "mm: hugetlb: allocate frozen gigantic folio" from
Kefeng Wang cleans up the allocation of frozen folios and avoids some
atomic refcount operations.
- The 11 patch series "mm/damon: advance DAMOS-based LRU sorting" from
SeongJae Park improves DAMOS's movement of memory betewwn the active and
inactive LRUs and adds auto-tuning of the ratio-based quotas and of
monitoring intervals.
- The 18 patch series "Support page table check on PowerPC" from Andrew
Donnellan makes CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc.
- The 3 patch series "nodemask: align nodes_and{,not} with underlying
bitmap ops" from Yury Norov makes nodes_and() and nodes_andnot()
propagate the return values from the underlying bit operations, enabling
some cleanup in calling code.
- The 5 patch series "mm/damon: hide kdamond and kdamond_lock from API
callers" from SeongJae Park cleans up some DAMON internal interfaces.
- The 4 patch series "mm/khugepaged: cleanups and scan limit fix" from
Shivank Garg does some cleanup work in khupaged and fixes a scan limit
accounting issue.
- The 24 patch series "mm: balloon infrastructure cleanups" from David
Hildenbrand goes to town on the balloon infrastructure and its page
migration function. Mainly cleanups, also some locking simplification.
- The 2 patch series "mm/vmscan: add tracepoint and reason for
kswapd_failures reset" from Jiayuan Chen adds additional tracepoints to
the page reclaim code.
- The 3 patch series "Replace wq users and add WQ_PERCPU to
alloc_workqueue() users" from Marco Crivellari is part of Marco's
kernel-wide migration from the legacy workqueue APIs over to the
preferred unbound workqueues.
- The 9 patch series "Various mm kselftests improvements/fixes" from
Kevin Brodsky provides various unrelated improvements/fixes for the mm
kselftests.
- The 5 patch series "mm: accelerate gigantic folio allocation" from
Kefeng Wang greatly speeds up gigantic folio allocation, mainly by
avoiding unnecessary work in pfn_range_valid_contig().
- The 5 patch series "selftests/damon: improve leak detection and wss
estimation reliability" from SeongJae Park improves the reliability of
two of the DAMON selftests.
- The 8 patch series "mm/damon: cleanup kdamond, damon_call(), damos
filter and DAMON_MIN_REGION" from SeongJae Park does some cleanup work
in the core DAMON code.
- The 8 patch series "Docs/mm/damon: update intro, modules, maintainer
profile, and misc" from SeongJae Park performs maintenance work on the
DAMON documentation.
- The 10 patch series "mm: add and use vma_assert_stabilised() helper"
from Lorenzo Stoakes refactors and cleans up the core VMA code. The
main aim here is to be able to use the mmap write lock's lockdep state
to perform various assertions regarding the locking which the VMA code
requires.
- The 19 patch series "mm, swap: swap table phase II: unify swapin use"
from Kairui Song removes some old swap code (swap cache bypassing and
swap synchronization) which wasn't working very well. Various other
cleanups and simplifications were made. The end result is a 20% speedup
in one benchmark.
- The 8 patch series "enable PT_RECLAIM on more 64-bit architectures"
from Qi Zheng makes PT_RECLAIM available on 64-bit alpha, loongarch,
mips, parisc, um, Various cleanups were performed along the way.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY1HfAAKCRDdBJ7gKXxA
jqhZAP9H8ZlKKqCEgnr6U5XXmJ63Ep2FDQpl8p35yr9yVuU9+gEAgfyWiJ43l1fP
rT0yjsUW3KQFBi/SEA3R6aYarmoIBgI=
=+HLt
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
- Fix device reference leak in error path
- Check if system provides a 64-bit free running platform counter
- Minor fixes in debug code
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaYuPEgAKCRD3ErUQojoP
X3z9AQCfvU14/vkMab/iXt7mn7yf1CZbvo7cczAMA8XTRvLNUQD7BL+6tHqSxwCh
rZax1BQR8TKArZYWkdOADtldog0plQ4=
=NhTL
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Fix device reference leak in error path
- Check if system provides a 64-bit free running platform counter
- Minor fixes in debug code
* tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: lba_pci: Add debug code to show IO and PA ranges
parisc: Detect 64-bit free running platform counter
parisc: Fix minor printk issues in iosapic debug code
parisc: Enhance debug code for PAT firmware
parisc: Add PDC PAT call to get free running 64-bit counter
parisc: Fix module path output in qemu tables
parisc: Export model name for MPE/ix
parisc: Prevent interrupts during reboot
parisc: Print hardware IDs as 4 digit hex strings
parisc: kernel: replace kfree() with put_device() in create_tree_node()
- Provide the missing 64-bit variant of clock_getres()
This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
finally the removal of 32-bit time types from the kernel and UAPI.
- Remove the useless and broken getcpu_cache from the VDSO
The intention was to provide a trivial way to retrieve the CPU number from
the VDSO, but as the VDSO data is per process there is no way to make it
work.
- Switch get/put_unaligned() from packed struct to memcpy()
The packed struct violates strict aliasing rules which requires to pass
-fno-strict-aliasing to the compiler. As this are scalar values
__builtin_memcpy() turns them into simple loads and stores
- Use __typeof_unqual__() for __unqual_scalar_typeof()
The get/put_unaligned() changes triggered a new sparse warning when __beNN
types are used with get/put_unaligned() as sparse builds add a special
'bitwise' attribute to them which prevents sparse to evaluate the Generic
in __unqual_scalar_typeof().
Newer sparse versions support __typeof_unqual__() which avoids the problem,
but requires a recent sparse install. So this adds a sanity check to sparse
builds, which validates that sparse is available and capable of handling it.
- Force inline __cvdso_clock_getres_common()
Compilers sometimes un-inline agressively, which results in function call
overhead and problems with automatic stack variable initialization.
Interestingly enough the force inlining results in smaller code than the
un-inlined variant produced by GCC when optimizing for size.
-----BEGIN PGP SIGNATURE-----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=0ogX
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Provide the missing 64-bit variant of clock_getres()
This allows the extension of CONFIG_COMPAT_32BIT_TIME to the vDSO and
finally the removal of 32-bit time types from the kernel and UAPI.
- Remove the useless and broken getcpu_cache from the VDSO
The intention was to provide a trivial way to retrieve the CPU number
from the VDSO, but as the VDSO data is per process there is no way to
make it work.
- Switch get/put_unaligned() from packed struct to memcpy()
The packed struct violates strict aliasing rules which requires to
pass -fno-strict-aliasing to the compiler. As this are scalar values
__builtin_memcpy() turns them into simple loads and stores
- Use __typeof_unqual__() for __unqual_scalar_typeof()
The get/put_unaligned() changes triggered a new sparse warning when
__beNN types are used with get/put_unaligned() as sparse builds add a
special 'bitwise' attribute to them which prevents sparse to evaluate
the Generic in __unqual_scalar_typeof().
Newer sparse versions support __typeof_unqual__() which avoids the
problem, but requires a recent sparse install. So this adds a sanity
check to sparse builds, which validates that sparse is available and
capable of handling it.
- Force inline __cvdso_clock_getres_common()
Compilers sometimes un-inline agressively, which results in function
call overhead and problems with automatic stack variable
initialization.
Interestingly enough the force inlining results in smaller code than
the un-inlined variant produced by GCC when optimizing for size.
* tag 'timers-vdso-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/gettimeofday: Force inlining of __cvdso_clock_getres_common()
x86/percpu: Make CONFIG_USE_X86_SEG_SUPPORT work with sparse
compiler: Use __typeof_unqual__() for __unqual_scalar_typeof()
powerpc/vdso: Provide clock_getres_time64()
tools headers: Remove unneeded ignoring of warnings in unaligned.h
tools headers: Update the linux/unaligned.h copy with the kernel sources
vdso: Switch get/put_unaligned() from packed struct to memcpy()
parisc: Inline a type punning version of get_unaligned_le32()
vdso: Remove struct getcpu_cache
MIPS: vdso: Provide getres_time64() for 32-bit ABIs
arm64: vdso32: Provide clock_getres_time64()
ARM: VDSO: Provide clock_getres_time64()
ARM: VDSO: Patch out __vdso_clock_getres() if unavailable
x86/vdso: Provide clock_getres_time64() for x86-32
selftests: vDSO: vdso_test_abi: Add test for clock_getres_time64()
selftests: vDSO: vdso_test_abi: Use UAPI system call numbers
selftests: vDSO: vdso_config: Add configurations for clock_getres_time64()
vdso: Add prototype for __vdso_clock_getres_time64()
Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes: reduce
the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number
of preemption models from four to just two: 'full' and 'lazy'
on up-to-date architectures (arm64, loongarch, powerpc,
riscv, s390, x86).
None and voluntary are only available as legacy features
on platforms that don't implement lazy preemption yet,
or which don't even support preemption.
The goal is to eventually remove cond_resched() and
voluntary preemption altogether.
(Peter Zijlstra)
RSEQ based 'scheduler time slice extension' support:
This allows a thread to request a time slice extension when it
enters a critical section to avoid contention on a resource when
the thread is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
(Thomas Gleixner)
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
(Peter Zijlstra)
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU,
which improves the scalability of various workloads.
(Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching
(Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups:
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
(Shrikanth Hegde)
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
(Yury Norov)
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and
Joel Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements, which is part of the
scheduler tree in this cycle due to interdependencies with the RSEQ
based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
(Jinjie Ruan)
Scheduler core updates:
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
(Peter Zijlstra)
Fair scheduler updates/refactoring:
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
(Peter Zijlstra)
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers
for wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
(Ingo Molnar)
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of
throttled cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing (zenghongling)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmmJj+IRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1grtQ//WyXYGVE/WicdqslfaCY2Mr0uJnL0tLSM
CJp+0LROdkmy+ChJmftO8RgjCUSsjhC4/xcBhUQXApf/ffQi3b2jH6nkTp/Z64Ms
p2IXLkBiZjwdcO6fGbB0JE2G1J4hGRC5BlqfgkZzWidMf3kIbmrHg99mVWGzODLY
N/cPW4d0WGf9TScl1FgEiOqgF3czMLlqvTDJqaFMpsTzSUcRBnrG4xushb4W/bBx
573eqxgZJ6urNSGu8niY9PAl9F7gskXW3YxI3k8SH7VmJKSevWlwI9vMEhcRDzud
E0XxD7J8iPOKtr7ypXm7anMBv4jWVUdAnPbYi4TDsyDDU/HguqMqT1McTGn8wQ+F
jmdhmMC9/TEIzq93SNLbCYieibqDsmJoNVFFi0FWfPLMtYbcZd5a884SIz532vx4
DegdlDXdazUwhxzDiQR3sq1CsHXpxNS2YdrpadAtF/r2gU86DQjsEew8yBvXi7bb
Wrkzpax70sU1AFI23wJQkEb/OnnXyehAHAhhQN6GVvuiGr9P7C02WLEGLlmSmJrx
zl2F750P76yhTfGcvTfJ/5LTfSB+yRozGvcdXnIkyzWotY6a2D1MKNusAfVax+IR
kyfAWqVdxBhlKnqYbu92lTogvnPh3Lymd6G4TZZRkSH2jixyGd2oS7nZaDBAeBEM
NHQtr9R+KyU=
=Xj2f
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
On a 64-bit system, madvise(MADV_DONTNEED) may cause a large number of
empty PTE page table pages (such as 100GB+). To resolve this problem,
first enable MMU_GATHER_RCU_TABLE_FREE to prepare for enabling the
PT_RECLAIM feature, which resolves this problem.
Link: https://lkml.kernel.org/r/b827939046dbc94bc7c585cdbed8522baab75b15.1769515122.git.zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enhance output when running PAT firmware, which is helpful when
developing the QEMU emulator. The added code is behind an ifdef,
so no performance overhead for normal kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
PDC PAT defines this optional function. Testing on my C8000 workstation
and a rp3440 server did not indicate that they provide such counter.
Nevertheless, add the function since we should try to use such a
counter if it's available. In Qemu it should be simple to add it.
Signed-off-by: Helge Deller <deller@gmx.de>
The hardware IDs are 32-bit unsigned integers, so print them as 4-digit
hex numbers. Additionally fix some whitespace glitches.
Signed-off-by: Helge Deller <deller@gmx.de>
If device_register() fails, put_device() is the correct way to
drop the device reference.
Found by code review.
Fixes: 1070c9655b ("[PA-RISC] Fix must_check warnings in drivers.c")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Every architecture calls sparse_init() during setup_arch() although the
data structures created by sparse_init() are not used until the
initialization of the core MM.
Beside the code duplication, calling sparse_init() from architecture
specific code causes ordering differences of vmemmap and HVO
initialization on different architectures.
Move the call to sparse_init() from architecture specific code to
free_area_init() to ensure that vmemmap and HVO initialization order is
always the same.
Link: https://lkml.kernel.org/r/20260111082105.290734-25-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To initialize node, zone and memory map data structures every architecture
calls free_area_init() during setup_arch() and passes it an array of zone
limits.
Beside code duplication it creates "interesting" ordering cases between
allocation and initialization of hugetlb and the memory map. Some
architectures allocate hugetlb pages very early in setup_arch() in certain
cases, some only create hugetlb CMA areas in setup_arch() and sometimes
hugetlb allocations happen mm_core_init().
With arch_zone_limits_init() helper available now on all architectures it
is no longer necessary to call free_area_init() from architecture setup
code. Rather core MM initialization can call arch_zone_limits_init() in a
single place.
This allows to unify ordering of hugetlb vs memory map allocation and
initialization.
Remove the call to free_area_init() from architecture specific code and
place it in a new mm_core_init_early() function that is called immediately
after setup_arch().
After this refactoring it is possible to consolidate hugetlb allocations
and eliminate differences in ordering of hugetlb and memory map
initialization among different architectures.
As the first step of this consolidation move hugetlb_bootmem_alloc() to
mm_core_early_init().
Link: https://lkml.kernel.org/r/20260111082105.290734-24-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Move calculations of zone limits to a dedicated arch_zone_limits_init()
function.
Later MM core will use this function as an architecture specific callback
during nodes and zones initialization and thus there won't be a need to
call free_area_init() from every architecture.
Link: https://lkml.kernel.org/r/20260111082105.290734-15-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Provide a new syscall which has the only purpose to yield the CPU after the
kernel granted a time slice extension.
sched_yield() is not suitable for that because it unconditionally
schedules, but the end of the time slice extension is not required to
schedule when the task was already preempted. This also allows to have a
strict check for termination to catch user space invoking random syscalls
including sched_yield() from a time slice extension region.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de
Patch series "mm: folio_zero_user: clear page ranges", v11.
This series adds clearing of contiguous page ranges for hugepages.
The series improves on the current discontiguous clearing approach in two
ways:
- clear pages in a contiguous fashion.
- use batched clearing via clear_pages() wherever exposed.
The first is useful because it allows us to make much better use of
hardware prefetchers.
The second, enables advertising the real extent to the processor. Where
specific instructions support it (ex. string instructions on x86; "mops"
on arm64 etc), a processor can optimize based on this because, instead of
seeing a sequence of 8-byte stores, or a sequence of 4KB pages, it sees a
larger unit being operated on.
For instance, AMD Zen uarchs (for extents larger than LLC-size) switch to
a mode where they start eliding cacheline allocation. This is helpful not
just because it results in higher bandwidth, but also because now the
cache is not evicting useful cachelines and replacing them with zeroes.
Demand faulting a 64GB region shows performance improvement:
$ perf bench mem mmap -p $pg-sz -f demand -s 64GB -l 5
baseline +series
(GBps +- %stdev) (GBps +- %stdev)
pg-sz=2MB 11.76 +- 1.10% 25.34 +- 1.18% [*] +115.47% preempt=*
pg-sz=1GB 24.85 +- 2.41% 39.22 +- 2.32% + 57.82% preempt=none|voluntary
pg-sz=1GB (similar) 52.73 +- 0.20% [#] +112.19% preempt=full|lazy
[*] This improvement is because switching to sequential clearing
allows the hardware prefetchers to do a much better job.
[#] For pg-sz=1GB a large part of the improvement is because of the
cacheline elision mentioned above. preempt=full|lazy improves upon
that because, not needing explicit invocations of cond_resched() to
ensure reasonable preemption latency, it can clear the full extent
as a single unit. In comparison the maximum extent used for
preempt=none|voluntary is PROCESS_PAGES_NON_PREEMPT_BATCH (32MB).
When provided the full extent the processor forgoes allocating
cachelines on this path almost entirely.
(The hope is that eventually, in the fullness of time, the lazy
preemption model will be able to do the same job that none or
voluntary models are used for, allowing us to do away with
cond_resched().)
Raghavendra also tested previous version of the series on AMD Genoa and
sees similar improvement [1] with preempt=lazy.
$ perf bench mem map -p $page-size -f populate -s 64GB -l 10
base patched change
pg-sz=2MB 12.731939 GB/sec 26.304263 GB/sec 106.6%
pg-sz=1GB 26.232423 GB/sec 61.174836 GB/sec 133.2%
This patch (of 8):
Let's drop all variants that effectively map to clear_page() and provide
it in a generic variant instead.
We'll use the macro clear_user_page to indicate whether an architecture
provides it's own variant.
Also, clear_user_page() is only called from the generic variant of
clear_user_highpage(), so define it only if the architecture does not
provide a clear_user_highpage(). And, for simplicity define it in
linux/highmem.h.
Note that for parisc, clear_page() and clear_user_page() map to
clear_page_asm(), so we can just get rid of the custom clear_user_page()
implementation. There is a clear_user_page_asm() function on parisc, that
seems to be unused. Not sure what's up with that.
Link: https://lkml.kernel.org/r/20260107072009.1615991-1-ankur.a.arora@oracle.com
Link: https://lkml.kernel.org/r/20260107072009.1615991-2-ankur.a.arora@oracle.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Co-developed-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Konrad Rzessutek Wilk <konrad.wilk@oracle.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reading the byte/char output_len with get_unaligned_le32() can trigger
compiler warnings due to the size read. Avoid these warnings by using
type punning. This avoids issues when switching get_unaligned_t() to
__builtin_memcpy().
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20251016205126.2882625-2-irogers@google.com
Stop definining these privately and instead move them to the uapi
errno.h so that they become canonical instead of copy pasta.
Cc: linux-api@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/176826402587.3490369.17659117524205214600.stgit@frogsfrogsfrogs
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Here is the big set of tty/serial driver changes for 6.19-rc1. Nothing
major at all, just small constant churn to make the tty layer "cleaner"
as well as serial driver updates and even a new test added! Included in
here are:
- More tty/serial cleanups from Jiri
- tty tiocsti test added to hopefully ensure we don't regress in this
area again
- sc16is7xx driver updates
- imx serial driver updates
- 8250 driver updates
- new hardware device ids added
- other minor serial/tty driver cleanups and tweaks
All of these have been in linux-next for a while with no reported issues
other than a merge-conflict that you will have when you merge into your
tree (should be simple to resolve, just delete the code on both sides
of the merge).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTJ+g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymiEQCgweRHAivbv2avIlfsmpFewV27WMgAnR1aE5mW
JhhopcWcdjnRJikavHGo
=lhK0
-----END PGP SIGNATURE-----
Merge tag 'tty-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.19-rc1. Nothing
major at all, just small constant churn to make the tty layer
"cleaner" as well as serial driver updates and even a new test added!
Included in here are:
- More tty/serial cleanups from Jiri
- tty tiocsti test added to hopefully ensure we don't regress in this
area again
- sc16is7xx driver updates
- imx serial driver updates
- 8250 driver updates
- new hardware device ids added
- other minor serial/tty driver cleanups and tweaks
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
serial: sh-sci: Fix deadlock during RSCI FIFO overrun error
dt-bindings: serial: rsci: Drop "uart-has-rtscts: false"
LoongArch: dts: Add uart new compatible string
serial: 8250: Add Loongson uart driver support
dt-bindings: serial: 8250: Add Loongson uart compatible
serial: 8250: add driver for KEBA UART
serial: Keep rs485 settings for devices without firmware node
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: sprd: Return -EPROBE_DEFER when uart clock is not ready
tty: serial: samsung: Declare earlycon for Exynos850
serial: icom: Convert PCIBIOS_* return codes to errnos
serial: 8250-of: Fix style issues in 8250_of.c
serial: add support of CPCI cards
serial: mux: Fix kernel doc for mux_poll()
tty: replace use of system_unbound_wq with system_dfl_wq
serial: 8250_platform: simplify IRQF_SHARED handling
serial: 8250: make share_irqs local to 8250_platform
serial: 8250: move skip_txen_test to core
serial: drop SERIAL_8250_DEPRECATED_OPTIONS
...
- Fix boot on 710 workstation by not reprogramming ASP chip
- Fix 64bit userspace syscalls (64-bit userspace is still being
developed)
- minor code cleanups in asm/bug.h and perf_regs.c
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaTSEZgAKCRD3ErUQojoP
XyssAQDdM4gi+BUSGPx9OSnylp6H5OY1FHjIHqYWziT1fTVaRQD/RQM5phzXj25+
NAmG2EEVfS9mj6fA39QqZ8yw9MOGmgs=
=8ZMr
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
"A fix which allows booting on the very old 710 workstations, and two
fixes in the syscall entry/exit path which allow to execute 64-bit
userspace binaries.
Note that although we currently have a 64-bit (static) kernel to allow
more than 4 GB physical RAM, there is no support for 64-bit userspace
for parisc-linux yet, but Dave and Sven are making slowly progress to
port and fix glibc and gcc.
Summary:
- Fix boot on 710 workstation by not reprogramming ASP chip
- Fix 64bit userspace syscalls (64-bit userspace is still being
developed)
- minor code cleanups in asm/bug.h and perf_regs.c"
* tag 'parisc-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Do not reprogram affinitiy on ASP chip
parisc: Drop linux/kernel.h include from asm/bug.h header
parisc: remove unneeded semicolon in perf_regs.c
parisc: entry.S: fix space adjustment on interruption for 64-bit userspace
parisc: entry: set W bit for !compat tasks in syscall_restore_rfi()
parisc: Drop padding fields and layers entries from inventory log
- Improve WARN(), which has vararg printf like arguments,
to work with the x86 #UD based WARN-optimizing infrastructure
by hiding the format in the bug_table and replacing this
first argument with the address of the bug-table entry,
while making the actual function that's called a UD1 instruction.
(Peter Zijlstra)
- Introduce the CONFIG_DEBUG_BUGVERBOSE_DETAILED Kconfig switch
(Ingo Molnar, s390 support by Heiko Carstens)
Fixes and cleanups:
- bugs/s390: Remove private WARN_ON() implementation (Heiko Carstens)
- <asm/bugs.h>: Make i386 use GENERIC_BUG_RELATIVE_POINTERS
(Peter Zijlstra)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmktffcRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1gLCQ//ZMHTpv6UF+xY4Kq3rdVFJWRR7Prs2hDn
4V/cFHu7Xb2lRwpJDBNWnbiEkLbGR5qlWD+0CpAMK4mGuL9VjnoeflEzXxOPP9W1
7SWw1HDc6NkjHM3BNnvkPQbzWF4RL4ZGs4Lbb1nv7pjoTSdBMXNrD5RL+iNmfHHd
QfOG9ZiRyD5A/b07bfyjIXNaeC/Hot+FeVXTMfD7/vCfc2ywhL2Sm5G/igY/shTY
Una7q8sbFDD/bFFtWSR2eFQeHQQfT6c/Pu39ZcAIdTlLk1FtZ+A2wcRtwYv/FdPV
6KDOAxZK7fLMHoCdNTswsg+LbazhABOb/V1J7TaHq2tF/PeyN+B+ucxVY2KFcxQJ
V5eG5crMrUIL22QO/UaT3dPWxGbJYkNlAWl416tAKdgXA52W4OsPd+k4DGjeP569
KogAy3SY0D/80v1QN2HcFEJMvr7W2SukxtErqdtA5OKt/ZevB49lGqZoBecqASDO
QjI1K0yLKnb+erbMIpCpNj+o/Fr1JQgWbYVpwipL2GON4an6vrowimGTsUG7qqxN
Hwb7IaTNnWQ/4iyCkVV44q6Ln1gyP2hz5Lnzo7QJINUdzp98UjJLAEK4NRG44T4L
p0t5NMxnvREpAv35rwy03xhmITYeQMOqzN9JEBBvegQyld5ghbThxI7g9BDzcXyL
Bd0mF7WOV9M=
=bMUL
-----END PGP SIGNATURE-----
Merge tag 'core-bugs-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull bug handling infrastructure updates from Ingo Molnar:
"Core updates:
- Improve WARN(), which has vararg printf like arguments, to work
with the x86 #UD based WARN-optimizing infrastructure by hiding the
format in the bug_table and replacing this first argument with the
address of the bug-table entry, while making the actual function
that's called a UD1 instruction (Peter Zijlstra)
- Introduce the CONFIG_DEBUG_BUGVERBOSE_DETAILED Kconfig switch (Ingo
Molnar, s390 support by Heiko Carstens)
Fixes and cleanups:
- bugs/s390: Remove private WARN_ON() implementation (Heiko Carstens)
- <asm/bugs.h>: Make i386 use GENERIC_BUG_RELATIVE_POINTERS (Peter
Zijlstra)"
* tag 'core-bugs-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/bugs: Make i386 use GENERIC_BUG_RELATIVE_POINTERS
x86/bug: Fix BUG_FORMAT vs KASLR
x86_64/bug: Inline the UD1
x86/bug: Implement WARN_ONCE()
x86_64/bug: Implement __WARN_printf()
x86/bug: Use BUG_FORMAT for DEBUG_BUGVERBOSE_DETAILED
x86/bug: Add BUG_FORMAT basics
bug: Allow architectures to provide __WARN_printf()
bug: Implement WARN_ON() using __WARN_FLAGS()
bug: Add report_bug_entry()
bug: Add BUG_FORMAT_ARGS infrastructure
bug: Clean up CONFIG_GENERIC_BUG_RELATIVE_POINTERS
bug: Add BUG_FORMAT infrastructure
x86: Rework __bug_table helpers
bugs/s390: Remove private WARN_ON() implementation
bugs/core: Reorganize fields in the first line of WARNING output, add ->comm[] output
bugs/sh: Concatenate 'cond_str' with '__FILE__' in __WARN_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/parisc: Concatenate 'cond_str' with '__FILE__' in __WARN_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/riscv: Concatenate 'cond_str' with '__FILE__' in __BUG_FLAGS(), to extend WARN_ON/BUG_ON output
bugs/riscv: Pass in 'cond_str' to __BUG_FLAGS()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZQAKCRCRxhvAZXjc
ooKwAP4kR5kMjHlthf8jHmmCjVU3nQFO9hUZsIQL9gFJLOIQMAD+LLoTaq1WJufl
oSgZpREXZVmI1TK61eR6EZMB1YikGAo=
=TExi
-----END PGP SIGNATURE-----
Merge tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace updates from Christian Brauner:
"This contains substantial namespace infrastructure changes including a new
system call, active reference counting, and extensive header cleanups.
The branch depends on the shared kbuild branch for -fms-extensions support.
Features:
- listns() system call
Add a new listns() system call that allows userspace to iterate
through namespaces in the system. This provides a programmatic
interface to discover and inspect namespaces, addressing
longstanding limitations:
Currently, there is no direct way for userspace to enumerate
namespaces. Applications must resort to scanning /proc/*/ns/ across
all processes, which is:
- Inefficient - requires iterating over all processes
- Incomplete - misses namespaces not attached to any running
process but kept alive by file descriptors, bind mounts, or
parent references
- Permission-heavy - requires access to /proc for many processes
- No ordering or ownership information
- No filtering per namespace type
The listns() system call solves these problems:
ssize_t listns(const struct ns_id_req *req, u64 *ns_ids,
size_t nr_ns_ids, unsigned int flags);
struct ns_id_req {
__u32 size;
__u32 spare;
__u64 ns_id;
struct /* listns */ {
__u32 ns_type;
__u32 spare2;
__u64 user_ns_id;
};
};
Features include:
- Pagination support for large namespace sets
- Filtering by namespace type (MNT_NS, NET_NS, USER_NS, etc.)
- Filtering by owning user namespace
- Permission checks respecting namespace isolation
- Active Reference Counting
Introduce an active reference count that tracks namespace
visibility to userspace. A namespace is visible in the following
cases:
- The namespace is in use by a task
- The namespace is persisted through a VFS object (namespace file
descriptor or bind-mount)
- The namespace is a hierarchical type and is the parent of child
namespaces
The active reference count does not regulate lifetime (that's still
done by the normal reference count) - it only regulates visibility
to namespace file handles and listns().
This prevents resurrection of namespaces that are pinned only for
internal kernel reasons (e.g., user namespaces held by
file->f_cred, lazy TLB references on idle CPUs, etc.) which should
not be accessible via (1)-(3).
- Unified Namespace Tree
Introduce a unified tree structure for all namespaces with:
- Fixed IDs assigned to initial namespaces
- Lookup based solely on inode number
- Maintained list of owned namespaces per user namespace
- Simplified rbtree comparison helpers
Cleanups
- Header Reorganization:
- Move namespace types into separate header (ns_common_types.h)
- Decouple nstree from ns_common header
- Move nstree types into separate header
- Switch to new ns_tree_{node,root} structures with helper functions
- Use guards for ns_tree_lock
- Initial Namespace Reference Count Optimization
- Make all reference counts on initial namespaces a nop to avoid
pointless cacheline ping-pong for namespaces that can never go
away
- Drop custom reference count initialization for initial namespaces
- Add NS_COMMON_INIT() macro and use it for all namespaces
- pid: rely on common reference count behavior
- Miscellaneous Cleanups
- Rename exit_task_namespaces() to exit_nsproxy_namespaces()
- Rename is_initial_namespace() and make argument const
- Use boolean to indicate anonymous mount namespace
- Simplify owner list iteration in nstree
- nsfs: raise SB_I_NODEV, SB_I_NOEXEC, and DCACHE_DONTCACHE explicitly
- nsfs: use inode_just_drop()
- pidfs: raise DCACHE_DONTCACHE explicitly
- pidfs: simplify PIDFD_GET__NAMESPACE ioctls
- libfs: allow to specify s_d_flags
- cgroup: add cgroup namespace to tree after owner is set
- nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
Fixes:
- setns(pidfd, ...) race condition
Fix a subtle race when using pidfds with setns(). When the target
task exits after prepare_nsset() but before commit_nsset(), the
namespace's active reference count might have been dropped. If
setns() then installs the namespaces, it would bump the active
reference count from zero without taking the required reference on
the owner namespace, leading to underflow when later decremented.
The fix resurrects the ownership chain if necessary - if the caller
succeeded in grabbing passive references, the setns() should
succeed even if the target task exits or gets reaped.
- Return EFAULT on put_user() error instead of success
- Make sure references are dropped outside of RCU lock (some
namespaces like mount namespace sleep when putting the last
reference)
- Don't skip active reference count initialization for network
namespace
- Add asserts for active refcount underflow
- Add asserts for initial namespace reference counts (both passive
and active)
- ipc: enable is_ns_init_id() assertions
- Fix kernel-doc comments for internal nstree functions
- Selftests
- 15 active reference count tests
- 9 listns() functionality tests
- 7 listns() permission tests
- 12 inactive namespace resurrection tests
- 3 threaded active reference count tests
- commit_creds() active reference tests
- Pagination and stress tests
- EFAULT handling test
- nsid tests fixes"
* tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (103 commits)
pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls
nstree: fix kernel-doc comments for internal functions
nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaSmOZAAKCRCRxhvAZXjc
onGCAQDEHKNEuZMhkyd3K5YsJtMzZlW/uXp4+Wddeob+5yQp0wEA09xN4CJNMwhP
J6Kjaa80hWfrFacqSvyMUwQHHw6mngs=
=5Mom
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.19-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Cheaper MAY_EXEC handling for path lookup. This elides MAY_WRITE
permission checks during path lookup and adds the
IOP_FASTPERM_MAY_EXEC flag so filesystems like btrfs can avoid
expensive permission work.
- Hide dentry_cache behind runtime const machinery.
- Add German Maglione as virtiofs co-maintainer.
Cleanups:
- Tidy up and inline step_into() and walk_component() for improved
code generation.
- Re-enable IOCB_NOWAIT writes to files. This refactors file
timestamp update logic, fixing a layering bypass in btrfs when
updating timestamps on device files and improving FMODE_NOCMTIME
handling in VFS now that nfsd started using it.
- Path lookup optimizations extracting slowpaths into dedicated
routines and adding branch prediction hints for mntput_no_expire(),
fd_install(), lookup_slow(), and various other hot paths.
- Enable clang's -fms-extensions flag, requiring a JFS rename to
avoid conflicts.
- Remove spurious exports in fs/file_attr.c.
- Stop duplicating union pipe_index declaration. This depends on the
shared kbuild branch that brings in -fms-extensions support which
is merged into this branch.
- Use MD5 library instead of crypto_shash in ecryptfs.
- Use largest_zero_folio() in iomap_dio_zero().
- Replace simple_strtol/strtoul with kstrtoint/kstrtouint in init and
initrd code.
- Various typo fixes.
Fixes:
- Fix emergency sync for btrfs. Btrfs requires an explicit sync_fs()
call with wait == 1 to commit super blocks. The emergency sync path
never passed this, leaving btrfs data uncommitted during emergency
sync.
- Use local kmap in watch_queue's post_one_notification().
- Add hint prints in sb_set_blocksize() for LBS dependency on THP"
* tag 'vfs-6.19-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
MAINTAINERS: add German Maglione as virtiofs co-maintainer
fs: inline step_into() and walk_component()
fs: tidy up step_into() & friends before inlining
orangefs: use inode_update_timestamps directly
btrfs: fix the comment on btrfs_update_time
btrfs: use vfs_utimes to update file timestamps
fs: export vfs_utimes
fs: lift the FMODE_NOCMTIME check into file_update_time_flags
fs: refactor file timestamp update logic
include/linux/fs.h: trivial fix: regualr -> regular
fs/splice.c: trivial fix: pipes -> pipe's
fs: mark lookup_slow() as noinline
fs: add predicts based on nd->depth
fs: move mntput_no_expire() slowpath into a dedicated routine
fs: remove spurious exports in fs/file_attr.c
watch_queue: Use local kmap in post_one_notification()
fs: touch up predicts in path lookup
fs: move fd_install() slowpath into a dedicated routine and provide commentary
fs: hide dentry_cache behind runtime const machinery
fs: touch predicts in do_dentry_open()
...
In 3.7, 8250 was unintentionally renamed to 8250_core. This happened in
the commit 835d844d1a (8250_pnp: do pnp probe before legacy probe).
This made 8250.<xxxx> module options effectively defunct. Instead,
8250_core.<xxxx> worked.
In 3.9, the commit f2b8dfd9e4 (serial: 8250: Keep 8250.<xxxx> module
options functional after driver rename) made the original options work
again by introducing a hack.
Later in 3.9, the commit 9196d8acd7 (TTY: 8250, revert module name
change) changed the module name back to 8250 (from 8250_core). Since
then, the hack was there to support the transient 8250_core.<xxxx>
options. Those were present only in the 3.7..3.9 range.
These transient options were deprecated by 9326b047e4 (TTY: 8250,
deprecated 8250_core.* options) in v3.9 too.
Now, after those 12 years, it is time to get rid of this hack
completely.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251119092457.826789-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Bring in the shared branch with the kbuild tree to enable
'-fms-extensions' for 6.19. Further namespace cleanup work
requires this extension.
Signed-off-by: Christian Brauner <brauner@kernel.org>
While working on an unrelated patch series, I needed to include
linux/bug.h from linux/instrumented.h, in order to call WARN_ON_ONCE().
Doing so resulted in the following compiler error on parisc:
In file included from ./include/linux/atomic/atomic-instrumented.h:17,
from ./include/linux/atomic.h:82,
from ./arch/parisc/include/asm/bitops.h:13,
from ./include/linux/bitops.h:67,
from ./include/linux/kernel.h:23,
from ./arch/parisc/include/asm/bug.h:5,
from ./include/linux/bug.h:5,
from ./include/linux/page-flags.h:10,
from kernel/bounds.c:10:
./include/linux/instrumented.h: In function 'instrument_atomic_alignment_check':
./include/linux/instrumented.h:69:9: error: implicit declaration of function 'WARN_ON_ONCE' [-Werror=implicit-function-declaration]
69 | WARN_ON_ONCE((unsigned long)v & (size - 1));
| ^~~~~~~~~~~~
cc1: some warnings being treated as errors
make[3]: *** [scripts/Makefile.build:182: kernel/bounds.s] Error 1
The problem is, asm/bug.h indirectly includes atomic-instrumented.h,
which means a new cycle appeared in the graph of #includes. And because
some headers in the cycle can't see all definitions, my new WARN_ON_ONCE()
call appears to be an undeclared function.
This only happens on parisc and it's easy to fix. In the error
message above, linux/kernel.h is included by asm/bug.h, but it's no
longer needed there, so just remove that include.
The comment about needing BUGFLAG_TAINT seems to be incorrect as of
commit 19d436268d ("debug: Add _ONCE() logic to report_bug()"). Also,
there's a comment in linux/kernel.h which strongly discourages use of
that header.
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaQzbRwAKCRAdayaRccAa
ls8lAP9Dj1mOl+KTtajMvDnDTym4Sso9CaFP+5maFAv9CflAIwEA5QEtSwI9sMcH
ty8x9Y6TTuib+ns37i2jxR8cIt4jHwU=
=WA6M
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaRGyjgAKCRCRxhvAZXjc
okJ7AQDFRmoidpqHmRlvZQ3aismKkNHfx2k67QtRlX+YxDi8rQEAmmKyKUiX/SZV
39TroGfiJ5ytQuXwz3QxG/34cA+kAgQ=
=HqhX
-----END PGP SIGNATURE-----
Merge patch "kbuild: Add '-fms-extensions' to areas with dedicated CFLAGS"
Nathan Chancellor <nathan@kernel.org> says:
Shared branch between Kbuild and other trees for enabling
'-fms-extensions' for 6.19.
* tag 'kbuild-ms-extensions-6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Add '-fms-extensions' to areas with dedicated CFLAGS
Kbuild: enable -fms-extensions
jfs: Rename _inline to avoid conflict with clang's '-fms-extensions'
Link: https://patch.msgid.link/20251101-kbuild-ms-extensions-dedicated-cflags-v1-1-38004aba524b@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Guenter Roeck reported this kernel crash on his emulated B160L machine:
Starting network: udhcpc: started, v1.36.1
Backtrace:
[<104320d4>] unwind_once+0x1c/0x5c
[<10434a00>] walk_stackframe.isra.0+0x74/0xb8
[<10434a6c>] arch_stack_walk+0x28/0x38
[<104e5efc>] stack_trace_save+0x48/0x5c
[<105d1bdc>] set_track_prepare+0x44/0x6c
[<105d9c80>] ___slab_alloc+0xfc4/0x1024
[<105d9d38>] __slab_alloc.isra.0+0x58/0x90
[<105dc80c>] kmem_cache_alloc_noprof+0x2ac/0x4a0
[<105b8e54>] __anon_vma_prepare+0x60/0x280
[<105a823c>] __vmf_anon_prepare+0x68/0x94
[<105a8b34>] do_wp_page+0x8cc/0xf10
[<105aad88>] handle_mm_fault+0x6c0/0xf08
[<10425568>] do_page_fault+0x110/0x440
[<10427938>] handle_interruption+0x184/0x748
[<11178398>] schedule+0x4c/0x190
BUG: spinlock recursion on CPU#0, ifconfig/2420
lock: terminate_lock.2+0x0/0x1c, .magic: dead4ead, .owner: ifconfig/2420, .owner_cpu: 0
While creating the stack trace, the unwinder uses the stack pointer to guess
the previous frame to read the previous stack pointer from memory. The crash
happens, because the unwinder tries to read from unaligned memory and as such
triggers the unalignment trap handler which then leads to the spinlock
recursion and finally to a deadlock.
Fix it by checking the alignment before accessing the memory.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # v6.12+
This is a follow up to commit c4781dc3d1 ("Kbuild: enable
-fms-extensions") but in a separate change due to being substantially
different from the initial submission.
There are many places within the kernel that use their own CFLAGS
instead of the main KBUILD_CFLAGS, meaning code written with the main
kernel's use of '-fms-extensions' in mind that may be tangentially
included in these areas will result in "error: declaration does not
declare anything" messages from the compiler.
Add '-fms-extensions' to all these areas to ensure consistency, along
with -Wno-microsoft-anon-tag to silence clang's warning about use of the
extension that the kernel cares about using. parisc does not build with
clang so it does not need this warning flag. LoongArch does not need it
either because -W flags from KBUILD_FLAGS are pulled into cflags-vdso.
Reported-by: Christian Brauner <brauner@kernel.org>
Closes: https://lore.kernel.org/20251030-meerjungfrau-getrocknet-7b46eacc215d@brauner/
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
In wide mode, the IASQ contain the upper part of the GVA
during interruption. This needs to be reversed before
the space is used - otherwise it contains parts of IAOQ.
See Page 2-13 "Processing Resources / Interruption Instruction
Address Queues" in the Parisc 2.0 Architecture Manual page 2-13
for an explanation.
The IAOQ/IASQ space_adjust was skipped for other interruptions
than itlb misses. However, the code in handle_interruption()
checks whether iasq[0] contains a valid space. Due to the not
masked out bits this match failed and the process was killed.
Also add space_adjust for IAOQ1/IASQ1 so ptregs contains sane values.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
When the kernel leaves to userspace via syscall_restore_rfi(), the
W bit is not set in the new PSW. This doesn't cause any problems
because there's no 64 bit userspace for parisc. Simple static binaries
are usually loaded at addresses way below the 32 bit limit so the W bit
doesn't matter.
Fix this by setting the W bit when TIF_32BIT is not set.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
* Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
* Avoid a BUG_ON when opening a file on a maliciously corrupted file system
* Avoid mm warnings when freeing a very large orphan file metadata
* Avoid a theoretical races between metadata wrtteback and checkpoints.
(It's very hard to hit in practice, since the race requires that the
writeback take a very long time.)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmjvEgUACgkQ8vlZVpUN
gaPLXgf/UzjSmhiLSrvZ6IajGcCvwWI/j7aKL5sIbyz3Wqulz5SuMoZg3Vbi58sp
LJ6H0Ng8E7BCJa0EVf5YN24SAbfR+M4XSsIohjqo7OAXqin4SYSp6TjW9ex7dJmY
uUOHuNQ+r2MTGN2gi9bwgLEGZX5Yhn2jK01KCYb+mr/EMnmQ3iVilYViUd2xdeNv
xQY3+befzoaEtLe58qciPC1tZHFpIJvIj2g0mif3MO4t2zy5viQrn+v1l/CBRvL+
0ZqvAWa9q4GbLWqn62H/2YnIjHm/o437u7m9hExnG3Qhv7X3zhh0LGAZDmHxEO9n
zoNIJuYDhPb+8GfQXmDv/DkKFVXQNg==
=vCC5
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
Commit d6ace46c82 ("ext4: remove obsolete EXT3 config options")
removed the obsolete EXT3_CONFIG options, since it had been over a
decade since fs/ext3 had been removed. Unfortunately, there were a
number of defconfigs that still used CONFIG_EXT3_FS which the cleanup
commit didn't fix up. This led to a large number of defconfig test
builds to fail. Oops.
Fixes: d6ace46c82 ("ext4: remove obsolete EXT3 config options")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Minor enhancements and fixes, specifically:
- report emulation and alignment faults via perf
- add initial kernel-side support for perf_events
- small initialization fixes in the parisc firmware layer
- adjust TC* constants and avoid referencing termio structs to avoid
userspace build errors.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaOjZoAAKCRD3ErUQojoP
X3cJAQCoSmeEmrWePAQQg/OkUntwkqxb7JEkmzJ6jqR7Cr9ncAD+NKlOiFSRkAvl
FSGG3YZ/oqDSVvjkIGbhCDp16H/pGg4=
=EHkQ
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Minor enhancements and fixes, specifically:
- report emulation and alignment faults via perf
- add initial kernel-side support for perf_events
- small initialization fixes in the parisc firmware layer
- adjust TC* constants and avoid referencing termio structs to avoid
userspace build errors"
* tag 'parisc-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix iodc and device path return values on old machines
parisc: Firmware: Fix returned path for PDC_MODULE_FIND on older machines
parisc: Add initial kernel-side perf_event support
parisc: Report software alignment faults via perf
parisc: Report emulation faults via perf
parisc: don't reference obsolete termio struct for TC* constants
parisc: Remove spurious if statement from raw_copy_from_user()
Older machines may not fully initialize the return values when asking for IODC
and device path data when building the inventory. Work around possible
firmware leaks by proper initialization of the variables.
Signed-off-by: Helge Deller <deller@gmx.de>
Older machines (like my 715/64) don't correctly initialize the
device path when returning from the PDC_MODULE_FIND firmware call.
Work around that shortcoming by initializing the path with the
known values.
Signed-off-by: Helge Deller <deller@gmx.de>
