This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The original code checks 'if (ARC_CC_AL)', which is always true since
ARC_CC_AL is a constant. This makes the check redundant and likely
obscures the intention of verifying whether the jump is conditional.
Updates the code to check cond == ARC_CC_AL instead, reflecting the intent
to differentiate conditional from unconditional jumps.
Suggested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Shahab Vahedi <list+bpf@vahedi.org>
Signed-off-by: Hardevsinh Palaniya <hardevsinh.palaniya@siliconsignals.io>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
This will add eBPF JIT support to the 32-bit ARCv2 processors. The
implementation is qualified by running the BPF tests on a Synopsys HSDK
board with "ARC HS38 v2.1c at 500 MHz" as the 4-core CPU.
The test_bpf.ko reports 2-10 fold improvements in execution time of its
tests. For instance:
test_bpf: #33 tcpdump port 22 jited:0 704 1766 2104 PASS
test_bpf: #33 tcpdump port 22 jited:1 120 224 260 PASS
test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:0 238 PASS
test_bpf: #141 ALU_DIV_X: 4294967295 / 4294967295 = 1 jited:1 23 PASS
test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:0 2034681 PASS
test_bpf: #776 JMP32_JGE_K: all ... magnitudes jited:1 1020022 PASS
Deployment and structure
------------------------
The related codes are added to "arch/arc/net":
- bpf_jit.h -- The interface that a back-end translator must provide
- bpf_jit_core.c -- Knows how to handle the input eBPF byte stream
- bpf_jit_arcv2.c -- The back-end code that knows the translation logic
The bpf_int_jit_compile() at the end of bpf_jit_core.c is the entrance
to the whole process. Normally, the translation is done in one pass,
namely the "normal pass". In case some relocations are not known during
this pass, some data (arc_jit_data) is allocated for the next pass to
come. This possible next (and last) pass is called the "extra pass".
1. Normal pass # The necessary pass
1a. Dry run # Get the whole JIT length, epilogue offset, etc.
1b. Emit phase # Allocate memory and start emitting instructions
2. Extra pass # Only needed if there are relocations to be fixed
2a. Patch relocations
Support status
--------------
The JIT compiler supports BPF instructions up to "cpu=v4". However, it
does not yet provide support for:
- Tail calls
- Atomic operations
- 64-bit division/remainder
- BPF_PROBE_MEM* (exception table)
The result of "test_bpf" test suite on an HSDK board is:
hsdk-lnx# insmod test_bpf.ko test_suite=test_bpf
test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed]
All the failing test cases are due to the ones that were not JIT'ed.
Categorically, they can be represented as:
.-----------.------------.-------------.
| test type | opcodes | # of cases |
|-----------+------------+-------------|
| atomic | 0xC3, 0xDB | 149 |
| div64 | 0x37, 0x3F | 22 |
| mod64 | 0x97, 0x9F | 15 |
`-----------^------------+-------------|
| (total) 186 |
`-------------'
Setup: build config
-------------------
The following configs must be set to have a working JIT test:
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_TEST_BPF=m
The following options are not necessary for the tests module,
but are good to have:
CONFIG_DEBUG_INFO=y # prerequisite for below
CONFIG_DEBUG_INFO_BTF=y # so bpftool can generate vmlinux.h
CONFIG_FTRACE=y #
CONFIG_BPF_SYSCALL=y # all these options lead to
CONFIG_KPROBE_EVENTS=y # having CONFIG_BPF_EVENTS=y
CONFIG_PERF_EVENTS=y #
Some BPF programs provide data through /sys/kernel/debug:
CONFIG_DEBUG_FS=y
arc# mount -t debugfs debugfs /sys/kernel/debug
Setup: elfutils
---------------
The libdw.{so,a} library that is used by pahole for processing
the final binary must come from elfutils 0.189 or newer. The
support for ARCv2 [1] has been added since that version.
[1]
https://sourceware.org/git/?p=elfutils.git;a=commit;h=de3d46b3e7
Setup: pahole
-------------
The line below in linux/scripts/Makefile.btf must be commented out:
pahole-flags-$(call test-ge, $(pahole-ver), 121) += --btf_gen_floats
Or else, the build will fail:
$ make V=1
...
BTF .btf.vmlinux.bin.o
pahole -J --btf_gen_floats \
-j --lang_exclude=rust \
--skip_encoding_btf_inconsistent_proto \
--btf_gen_optimized .tmp_vmlinux.btf
Complex, interval and imaginary float types are not supported
Encountered error while encoding BTF.
...
BTFIDS vmlinux
./tools/bpf/resolve_btfids/resolve_btfids vmlinux
libbpf: failed to find '.BTF' ELF section in vmlinux
FAILED: load BTF from vmlinux: No data available
This is due to the fact that the ARC toolchains generate
"complex float" DIE entries in libgcc and at the moment, pahole
can't handle such entries.
Running the tests
-----------------
host$ scp /bld/linux/lib/test_bpf.ko arc:
arc # sysctl net.core.bpf_jit_enable=1
arc # insmod test_bpf.ko test_suite=test_bpf
...
test_bpf: #1048 Staggered jumps: JMP32_JSLE_X jited:1 697811 PASS
test_bpf: Summary: 863 PASSED, 186 FAILED, [851/851 JIT'ed]
Acknowledgments
---------------
- Claudiu Zissulescu for his unwavering support
- Yuriy Kolerov for testing and troubleshooting
- Vladimir Isaev for the pahole workaround
- Sergey Matyukevich for paving the road by adding the interpreter support
Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
Link: https://lore.kernel.org/r/20240430145604.38592-1-list+bpf@vahedi.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
