From 05bbe52d0be5637dcd3c880348e3688f7ec64eb7 Mon Sep 17 00:00:00 2001 From: Wadim Egorov Date: Thu, 27 Nov 2025 13:27:31 +0100 Subject: [PATCH 001/283] arm64: dts: ti: k3-am642-phyboard-electra-peb-c-010: Fix icssg-prueth schema warning Reduce length of dma-names and dmas properties for icssg1-ethernet node to comply with ti,icssg-prueth schema constraints. The previous entries exceeded the allowed count and triggered dtschema warnings during validation. Fixes: e53fbf955ea7 ("arm64: dts: ti: k3-am642-phyboard-electra: Add PEB-C-010 Overlay") Signed-off-by: Wadim Egorov Link: https://patch.msgid.link/20251127122733.2523367-1-w.egorov@phytec.de Signed-off-by: Nishanth Menon --- .../boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso index 7fc73cfacadb..1176a52d560b 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso @@ -30,13 +30,10 @@ <&main_pktdma 0xc206 15>, /* egress slice 1 */ <&main_pktdma 0xc207 15>, /* egress slice 1 */ <&main_pktdma 0x4200 15>, /* ingress slice 0 */ - <&main_pktdma 0x4201 15>, /* ingress slice 1 */ - <&main_pktdma 0x4202 0>, /* mgmnt rsp slice 0 */ - <&main_pktdma 0x4203 0>; /* mgmnt rsp slice 1 */ + <&main_pktdma 0x4201 15>; /* ingress slice 1 */ dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", "tx1-0", "tx1-1", "tx1-2", "tx1-3", - "rx0", "rx1", - "rxmgm0", "rxmgm1"; + "rx0", "rx1"; firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", From d876bb9353d87dee0ae620300106e8def189c785 Mon Sep 17 00:00:00 2001 From: Wadim Egorov Date: Thu, 27 Nov 2025 13:27:32 +0100 Subject: [PATCH 002/283] arm64: dts: ti: k3-am642-phyboard-electra-x27-gpio1-spi1-uart3: Fix schema warnings Rename pinctrl nodes to comply with naming conventions required by pinctrl-single schema. Also, replace invalid integer assignment in SPI node with a boolean to align with omap-spi schema. Fixes: 638ab30ce4c6 ("arm64: dts: ti: am64-phyboard-electra: Add DT overlay for X27 connector") Signed-off-by: Wadim Egorov Link: https://patch.msgid.link/20251127122733.2523367-2-w.egorov@phytec.de Signed-off-by: Nishanth Menon --- .../k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso index 996c42ec4253..bea8efa3e909 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtso @@ -20,13 +20,13 @@ }; &main_pmx0 { - main_gpio1_exp_header_gpio_pins_default: main-gpio1-exp-header-gpio-pins-default { + main_gpio1_exp_header_gpio_pins_default: main-gpio1-exp-header-gpio-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0220, PIN_INPUT, 7) /* (D14) SPI1_CS1.GPIO1_48 */ >; }; - main_spi1_pins_default: main-spi1-pins-default { + main_spi1_pins_default: main-spi1-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0224, PIN_INPUT, 0) /* (C14) SPI1_CLK */ AM64X_IOPAD(0x021C, PIN_OUTPUT, 0) /* (B14) SPI1_CS0 */ @@ -35,7 +35,7 @@ >; }; - main_uart3_pins_default: main-uart3-pins-default { + main_uart3_pins_default: main-uart3-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x0048, PIN_INPUT, 2) /* (U20) GPMC0_AD3.UART3_RXD */ AM64X_IOPAD(0x004c, PIN_OUTPUT, 2) /* (U18) GPMC0_AD4.UART3_TXD */ @@ -52,7 +52,7 @@ &main_spi1 { pinctrl-names = "default"; pinctrl-0 = <&main_spi1_pins_default>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; status = "okay"; }; From cf5e8adebe77917a4cc95e43e461cdbd857591ce Mon Sep 17 00:00:00 2001 From: Wadim Egorov Date: Thu, 27 Nov 2025 13:27:33 +0100 Subject: [PATCH 003/283] arm64: dts: ti: k3-am62-lp-sk-nand: Rename pinctrls to fix schema warnings Rename pinctrl nodes to comply with naming conventions required by pinctrl-single schema. Fixes: e569152274fec ("arm64: dts: ti: am62-lp-sk: Add overlay for NAND expansion card") Signed-off-by: Wadim Egorov Link: https://patch.msgid.link/20251127122733.2523367-3-w.egorov@phytec.de Signed-off-by: Nishanth Menon --- arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso b/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso index 173ac60723b6..b4daa674eaa1 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso @@ -14,7 +14,7 @@ }; &main_pmx0 { - gpmc0_pins_default: gpmc0-pins-default { + gpmc0_pins_default: gpmc0-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x003c, PIN_INPUT, 0) /* (K19) GPMC0_AD0 */ AM62X_IOPAD(0x0040, PIN_INPUT, 0) /* (L19) GPMC0_AD1 */ From a260bd22a355bcdb74cedac6ab9b10739cd2c62c Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Tue, 9 Dec 2025 22:09:03 +0100 Subject: [PATCH 004/283] media: mc: fix potential use-after-free in media_request_alloc() Commit 6f504cbf108a ("media: convert media_request_alloc() to FD_PREPARE()") moved the call to fd_install() (now hidden in fd_publish()) before the snprintf(), making the later write to potentially already freed memory, as userland is free to call close() concurrently right after the call to fd_install() which may end up in the request_fops.release() handler freeing 'req'. Fixes: 6f504cbf108a ("media: convert media_request_alloc() to FD_PREPARE()") Signed-off-by: Mathias Krause Link: https://patch.msgid.link/20251209210903.603958-1-minipli@grsecurity.net Signed-off-by: Christian Brauner --- drivers/media/mc/mc-request.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/media/mc/mc-request.c b/drivers/media/mc/mc-request.c index 2ac9ac0a740b..3cca9a0c7c97 100644 --- a/drivers/media/mc/mc-request.c +++ b/drivers/media/mc/mc-request.c @@ -315,12 +315,12 @@ int media_request_alloc(struct media_device *mdev, int *alloc_fd) fd_prepare_file(fdf)->private_data = req; - *alloc_fd = fd_publish(fdf); - snprintf(req->debug_str, sizeof(req->debug_str), "%u:%d", - atomic_inc_return(&mdev->request_id), *alloc_fd); + atomic_inc_return(&mdev->request_id), fd_prepare_fd(fdf)); dev_dbg(mdev->dev, "request: allocated %s\n", req->debug_str); + *alloc_fd = fd_publish(fdf); + return 0; err_free_req: From ed61378b4dc63efe76cb8c23a36b228043332da3 Mon Sep 17 00:00:00 2001 From: Brian Foster Date: Mon, 8 Dec 2025 09:05:48 -0500 Subject: [PATCH 005/283] iomap: replace folio_batch allocation with stack allocation Zhang Yi points out that the dynamic folio_batch allocation in iomap_fill_dirty_folios() is problematic for the ext4 on iomap work that is under development because it doesn't sufficiently handle the allocation failure case (by allowing a retry, for example). We've also seen lockdep (via syzbot) complain recently about the scope of the allocation. The dynamic allocation was initially added for simplicity and to help indicate whether the batch was used or not by the calling fs. To address these issues, put the batch on the stack of iomap_zero_range() and use a flag to control whether the batch should be used in the iomap folio lookup path. This keeps things simple and eliminates allocation issues with lockdep and for ext4 on iomap. While here, also clean up the fill helper signature to be more consistent with the underlying filemap helper. Pass through the return value of the filemap helper (folio count) and update the lookup offset via an out param. Fixes: 395ed1ef0012 ("iomap: optional zero range dirty folio processing") Signed-off-by: Brian Foster Link: https://patch.msgid.link/20251208140548.373411-1-bfoster@redhat.com Acked-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Christian Brauner --- fs/iomap/buffered-io.c | 50 +++++++++++++++++++++++++++++------------- fs/iomap/iter.c | 6 ++--- fs/xfs/xfs_iomap.c | 11 +++++----- include/linux/iomap.h | 8 +++++-- 4 files changed, 50 insertions(+), 25 deletions(-) diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c index e5c1ca440d93..fd9a2cf95620 100644 --- a/fs/iomap/buffered-io.c +++ b/fs/iomap/buffered-io.c @@ -832,7 +832,7 @@ static struct folio *__iomap_get_folio(struct iomap_iter *iter, if (!mapping_large_folio_support(iter->inode->i_mapping)) len = min_t(size_t, len, PAGE_SIZE - offset_in_page(pos)); - if (iter->fbatch) { + if (iter->iomap.flags & IOMAP_F_FOLIO_BATCH) { struct folio *folio = folio_batch_next(iter->fbatch); if (!folio) @@ -929,7 +929,7 @@ static int iomap_write_begin(struct iomap_iter *iter, * process so return and let the caller iterate and refill the batch. */ if (!folio) { - WARN_ON_ONCE(!iter->fbatch); + WARN_ON_ONCE(!(iter->iomap.flags & IOMAP_F_FOLIO_BATCH)); return 0; } @@ -1544,23 +1544,39 @@ static int iomap_zero_iter(struct iomap_iter *iter, bool *did_zero, return status; } -loff_t +/** + * iomap_fill_dirty_folios - fill a folio batch with dirty folios + * @iter: Iteration structure + * @start: Start offset of range. Updated based on lookup progress. + * @end: End offset of range + * @iomap_flags: Flags to set on the associated iomap to track the batch. + * + * Returns the folio count directly. Also returns the associated control flag if + * the the batch lookup is performed and the expected offset of a subsequent + * lookup via out params. The caller is responsible to set the flag on the + * associated iomap. + */ +unsigned int iomap_fill_dirty_folios( struct iomap_iter *iter, - loff_t offset, - loff_t length) + loff_t *start, + loff_t end, + unsigned int *iomap_flags) { struct address_space *mapping = iter->inode->i_mapping; - pgoff_t start = offset >> PAGE_SHIFT; - pgoff_t end = (offset + length - 1) >> PAGE_SHIFT; + pgoff_t pstart = *start >> PAGE_SHIFT; + pgoff_t pend = (end - 1) >> PAGE_SHIFT; + unsigned int count; - iter->fbatch = kmalloc(sizeof(struct folio_batch), GFP_KERNEL); - if (!iter->fbatch) - return offset + length; - folio_batch_init(iter->fbatch); + if (!iter->fbatch) { + *start = end; + return 0; + } - filemap_get_folios_dirty(mapping, &start, end, iter->fbatch); - return (start << PAGE_SHIFT); + count = filemap_get_folios_dirty(mapping, &pstart, pend, iter->fbatch); + *start = (pstart << PAGE_SHIFT); + *iomap_flags |= IOMAP_F_FOLIO_BATCH; + return count; } EXPORT_SYMBOL_GPL(iomap_fill_dirty_folios); @@ -1569,17 +1585,21 @@ iomap_zero_range(struct inode *inode, loff_t pos, loff_t len, bool *did_zero, const struct iomap_ops *ops, const struct iomap_write_ops *write_ops, void *private) { + struct folio_batch fbatch; struct iomap_iter iter = { .inode = inode, .pos = pos, .len = len, .flags = IOMAP_ZERO, .private = private, + .fbatch = &fbatch, }; struct address_space *mapping = inode->i_mapping; int ret; bool range_dirty; + folio_batch_init(&fbatch); + /* * To avoid an unconditional flush, check pagecache state and only flush * if dirty and the fs returns a mapping that might convert on @@ -1590,11 +1610,11 @@ iomap_zero_range(struct inode *inode, loff_t pos, loff_t len, bool *did_zero, while ((ret = iomap_iter(&iter, ops)) > 0) { const struct iomap *srcmap = iomap_iter_srcmap(&iter); - if (WARN_ON_ONCE(iter.fbatch && + if (WARN_ON_ONCE((iter.iomap.flags & IOMAP_F_FOLIO_BATCH) && srcmap->type != IOMAP_UNWRITTEN)) return -EIO; - if (!iter.fbatch && + if (!(iter.iomap.flags & IOMAP_F_FOLIO_BATCH) && (srcmap->type == IOMAP_HOLE || srcmap->type == IOMAP_UNWRITTEN)) { s64 status; diff --git a/fs/iomap/iter.c b/fs/iomap/iter.c index 8692e5e41c6d..c04796f6e57f 100644 --- a/fs/iomap/iter.c +++ b/fs/iomap/iter.c @@ -8,10 +8,10 @@ static inline void iomap_iter_reset_iomap(struct iomap_iter *iter) { - if (iter->fbatch) { + if (iter->iomap.flags & IOMAP_F_FOLIO_BATCH) { folio_batch_release(iter->fbatch); - kfree(iter->fbatch); - iter->fbatch = NULL; + folio_batch_reinit(iter->fbatch); + iter->iomap.flags &= ~IOMAP_F_FOLIO_BATCH; } iter->status = 0; diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 04f39ea15898..37a1b33e9045 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -1831,7 +1831,6 @@ xfs_buffered_write_iomap_begin( */ if (flags & IOMAP_ZERO) { xfs_fileoff_t eof_fsb = XFS_B_TO_FSB(mp, XFS_ISIZE(ip)); - u64 end; if (isnullstartblock(imap.br_startblock) && offset_fsb >= eof_fsb) @@ -1851,12 +1850,14 @@ xfs_buffered_write_iomap_begin( */ if (imap.br_state == XFS_EXT_UNWRITTEN && offset_fsb < eof_fsb) { - loff_t len = min(count, - XFS_FSB_TO_B(mp, imap.br_blockcount)); + loff_t foffset = offset, fend; - end = iomap_fill_dirty_folios(iter, offset, len); + fend = offset + + min(count, XFS_FSB_TO_B(mp, imap.br_blockcount)); + iomap_fill_dirty_folios(iter, &foffset, fend, + &iomap_flags); end_fsb = min_t(xfs_fileoff_t, end_fsb, - XFS_B_TO_FSB(mp, end)); + XFS_B_TO_FSB(mp, foffset)); } xfs_trim_extent(&imap, offset_fsb, end_fsb - offset_fsb); diff --git a/include/linux/iomap.h b/include/linux/iomap.h index 520e967cb501..6bb941707d12 100644 --- a/include/linux/iomap.h +++ b/include/linux/iomap.h @@ -88,6 +88,9 @@ struct vm_fault; /* * Flags set by the core iomap code during operations: * + * IOMAP_F_FOLIO_BATCH indicates that the folio batch mechanism is active + * for this operation, set by iomap_fill_dirty_folios(). + * * IOMAP_F_SIZE_CHANGED indicates to the iomap_end method that the file size * has changed as the result of this write operation. * @@ -95,6 +98,7 @@ struct vm_fault; * range it covers needs to be remapped by the high level before the operation * can proceed. */ +#define IOMAP_F_FOLIO_BATCH (1U << 13) #define IOMAP_F_SIZE_CHANGED (1U << 14) #define IOMAP_F_STALE (1U << 15) @@ -352,8 +356,8 @@ bool iomap_dirty_folio(struct address_space *mapping, struct folio *folio); int iomap_file_unshare(struct inode *inode, loff_t pos, loff_t len, const struct iomap_ops *ops, const struct iomap_write_ops *write_ops); -loff_t iomap_fill_dirty_folios(struct iomap_iter *iter, loff_t offset, - loff_t length); +unsigned int iomap_fill_dirty_folios(struct iomap_iter *iter, loff_t *start, + loff_t end, unsigned int *iomap_flags); int iomap_zero_range(struct inode *inode, loff_t pos, loff_t len, bool *did_zero, const struct iomap_ops *ops, const struct iomap_write_ops *write_ops, void *private); From 392e317a20c32d45eebe4de8dc24408c6d1765d1 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 4 Dec 2025 08:48:32 -0500 Subject: [PATCH 006/283] filelock: add lease_dispose_list() helper The lease-handling code paths always know they're disposing of leases, yet locks_dispose_list() checks flags at runtime to determine whether to call locks_free_lease() or locks_free_lock(). Split out a dedicated lease_dispose_list() helper for lease code paths. This makes the type handling explicit and prepares for the upcoming lease_manager enhancements where lease-specific operations are being consolidated. Reviewed-by: Chuck Lever Signed-off-by: Jeff Layton Link: https://patch.msgid.link/20251204-dir-deleg-ro-v2-1-22d37f92ce2c@kernel.org Signed-off-by: Christian Brauner --- fs/locks.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/fs/locks.c b/fs/locks.c index 9f565802a88c..be0b79286da8 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -369,10 +369,19 @@ locks_dispose_list(struct list_head *dispose) while (!list_empty(dispose)) { flc = list_first_entry(dispose, struct file_lock_core, flc_list); list_del_init(&flc->flc_list); - if (flc->flc_flags & (FL_LEASE|FL_DELEG|FL_LAYOUT)) - locks_free_lease(file_lease(flc)); - else - locks_free_lock(file_lock(flc)); + locks_free_lock(file_lock(flc)); + } +} + +static void +lease_dispose_list(struct list_head *dispose) +{ + struct file_lock_core *flc; + + while (!list_empty(dispose)) { + flc = list_first_entry(dispose, struct file_lock_core, flc_list); + list_del_init(&flc->flc_list); + locks_free_lease(file_lease(flc)); } } @@ -1620,7 +1629,7 @@ restart: spin_unlock(&ctx->flc_lock); percpu_up_read(&file_rwsem); - locks_dispose_list(&dispose); + lease_dispose_list(&dispose); error = wait_event_interruptible_timeout(new_fl->c.flc_wait, list_empty(&new_fl->c.flc_blocked_member), break_time); @@ -1643,7 +1652,7 @@ restart: out: spin_unlock(&ctx->flc_lock); percpu_up_read(&file_rwsem); - locks_dispose_list(&dispose); + lease_dispose_list(&dispose); free_lock: locks_free_lease(new_fl); return error; @@ -1727,7 +1736,7 @@ static int __fcntl_getlease(struct file *filp, unsigned int flavor) spin_unlock(&ctx->flc_lock); percpu_up_read(&file_rwsem); - locks_dispose_list(&dispose); + lease_dispose_list(&dispose); } return type; } @@ -1896,7 +1905,7 @@ out_setup: out: spin_unlock(&ctx->flc_lock); percpu_up_read(&file_rwsem); - locks_dispose_list(&dispose); + lease_dispose_list(&dispose); if (is_deleg) inode_unlock(inode); if (!error && !my_fl) @@ -1932,7 +1941,7 @@ static int generic_delete_lease(struct file *filp, void *owner) error = fl->fl_lmops->lm_change(victim, F_UNLCK, &dispose); spin_unlock(&ctx->flc_lock); percpu_up_read(&file_rwsem); - locks_dispose_list(&dispose); + lease_dispose_list(&dispose); return error; } @@ -2727,7 +2736,7 @@ locks_remove_lease(struct file *filp, struct file_lock_context *ctx) spin_unlock(&ctx->flc_lock); percpu_up_read(&file_rwsem); - locks_dispose_list(&dispose); + lease_dispose_list(&dispose); } /* From 12965a190eaea614bb49e22041e8fc0d03d0310f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 4 Dec 2025 08:48:33 -0500 Subject: [PATCH 007/283] filelock: allow lease_managers to dictate what qualifies as a conflict Requesting a delegation on a file from the userland fcntl() interface currently succeeds when there are conflicting opens present. This is because the lease handling code ignores conflicting opens for FL_LAYOUT and FL_DELEG leases. This was a hack put in place long ago, because nfsd already checks for conflicts in its own way. The kernel needs to perform this check for userland delegations the same way it is done for leases, however. Make this dependent on the lease_manager by adding a new ->lm_open_conflict() lease_manager operation and have generic_add_lease() call that instead of check_conflicting_open(). Morph check_conflicting_open() into a ->lm_open_conflict() op that is only called for userland leases/delegations. Set the ->lm_open_conflict() operations for nfsd to trivial functions that always return 0. Reviewed-by: Chuck Lever Signed-off-by: Jeff Layton Link: https://patch.msgid.link/20251204-dir-deleg-ro-v2-2-22d37f92ce2c@kernel.org Signed-off-by: Christian Brauner --- Documentation/filesystems/locking.rst | 1 + fs/locks.c | 90 +++++++++++++-------------- fs/nfsd/nfs4layouts.c | 23 ++++++- fs/nfsd/nfs4state.c | 19 ++++++ include/linux/filelock.h | 1 + 5 files changed, 84 insertions(+), 50 deletions(-) diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst index 77704fde9845..04c7691e50e0 100644 --- a/Documentation/filesystems/locking.rst +++ b/Documentation/filesystems/locking.rst @@ -416,6 +416,7 @@ lm_change yes no no lm_breaker_owns_lease: yes no no lm_lock_expirable yes no no lm_expire_lock no no yes +lm_open_conflict yes no no ====================== ============= ================= ========= buffer_head diff --git a/fs/locks.c b/fs/locks.c index be0b79286da8..e75c8084d937 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -585,10 +585,50 @@ lease_setup(struct file_lease *fl, void **priv) __f_setown(filp, task_pid(current), PIDTYPE_TGID, 0); } +/** + * lease_open_conflict - see if the given file points to an inode that has + * an existing open that would conflict with the + * desired lease. + * @filp: file to check + * @arg: type of lease that we're trying to acquire + * + * Check to see if there's an existing open fd on this file that would + * conflict with the lease we're trying to set. + */ +static int +lease_open_conflict(struct file *filp, const int arg) +{ + struct inode *inode = file_inode(filp); + int self_wcount = 0, self_rcount = 0; + + if (arg == F_RDLCK) + return inode_is_open_for_write(inode) ? -EAGAIN : 0; + else if (arg != F_WRLCK) + return 0; + + /* + * Make sure that only read/write count is from lease requestor. + * Note that this will result in denying write leases when i_writecount + * is negative, which is what we want. (We shouldn't grant write leases + * on files open for execution.) + */ + if (filp->f_mode & FMODE_WRITE) + self_wcount = 1; + else if (filp->f_mode & FMODE_READ) + self_rcount = 1; + + if (atomic_read(&inode->i_writecount) != self_wcount || + atomic_read(&inode->i_readcount) != self_rcount) + return -EAGAIN; + + return 0; +} + static const struct lease_manager_operations lease_manager_ops = { .lm_break = lease_break_callback, .lm_change = lease_modify, .lm_setup = lease_setup, + .lm_open_conflict = lease_open_conflict, }; /* @@ -1754,52 +1794,6 @@ int fcntl_getdeleg(struct file *filp, struct delegation *deleg) return 0; } -/** - * check_conflicting_open - see if the given file points to an inode that has - * an existing open that would conflict with the - * desired lease. - * @filp: file to check - * @arg: type of lease that we're trying to acquire - * @flags: current lock flags - * - * Check to see if there's an existing open fd on this file that would - * conflict with the lease we're trying to set. - */ -static int -check_conflicting_open(struct file *filp, const int arg, int flags) -{ - struct inode *inode = file_inode(filp); - int self_wcount = 0, self_rcount = 0; - - if (flags & FL_LAYOUT) - return 0; - if (flags & FL_DELEG) - /* We leave these checks to the caller */ - return 0; - - if (arg == F_RDLCK) - return inode_is_open_for_write(inode) ? -EAGAIN : 0; - else if (arg != F_WRLCK) - return 0; - - /* - * Make sure that only read/write count is from lease requestor. - * Note that this will result in denying write leases when i_writecount - * is negative, which is what we want. (We shouldn't grant write leases - * on files open for execution.) - */ - if (filp->f_mode & FMODE_WRITE) - self_wcount = 1; - else if (filp->f_mode & FMODE_READ) - self_rcount = 1; - - if (atomic_read(&inode->i_writecount) != self_wcount || - atomic_read(&inode->i_readcount) != self_rcount) - return -EAGAIN; - - return 0; -} - static int generic_add_lease(struct file *filp, int arg, struct file_lease **flp, void **priv) { @@ -1836,7 +1830,7 @@ generic_add_lease(struct file *filp, int arg, struct file_lease **flp, void **pr percpu_down_read(&file_rwsem); spin_lock(&ctx->flc_lock); time_out_leases(inode, &dispose); - error = check_conflicting_open(filp, arg, lease->c.flc_flags); + error = lease->fl_lmops->lm_open_conflict(filp, arg); if (error) goto out; @@ -1893,7 +1887,7 @@ generic_add_lease(struct file *filp, int arg, struct file_lease **flp, void **pr * precedes these checks. */ smp_mb(); - error = check_conflicting_open(filp, arg, lease->c.flc_flags); + error = lease->fl_lmops->lm_open_conflict(filp, arg); if (error) { locks_unlink_lock_ctx(&lease->c); goto out; diff --git a/fs/nfsd/nfs4layouts.c b/fs/nfsd/nfs4layouts.c index 683bd1130afe..ad7af8cfcf1f 100644 --- a/fs/nfsd/nfs4layouts.c +++ b/fs/nfsd/nfs4layouts.c @@ -764,9 +764,28 @@ nfsd4_layout_lm_change(struct file_lease *onlist, int arg, return lease_modify(onlist, arg, dispose); } +/** + * nfsd4_layout_lm_open_conflict - see if the given file points to an inode that has + * an existing open that would conflict with the + * desired lease. + * @filp: file to check + * @arg: type of lease that we're trying to acquire + * + * The kernel will call into this operation to determine whether there + * are conflicting opens that may prevent the layout from being granted. + * For nfsd, that check is done at a higher level, so this trivially + * returns 0. + */ +static int +nfsd4_layout_lm_open_conflict(struct file *filp, int arg) +{ + return 0; +} + static const struct lease_manager_operations nfsd4_layouts_lm_ops = { - .lm_break = nfsd4_layout_lm_break, - .lm_change = nfsd4_layout_lm_change, + .lm_break = nfsd4_layout_lm_break, + .lm_change = nfsd4_layout_lm_change, + .lm_open_conflict = nfsd4_layout_lm_open_conflict, }; int diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 808c24fb5c9a..19d6d6db107f 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -5552,10 +5552,29 @@ nfsd_change_deleg_cb(struct file_lease *onlist, int arg, return -EAGAIN; } +/** + * nfsd4_deleg_lm_open_conflict - see if the given file points to an inode that has + * an existing open that would conflict with the + * desired lease. + * @filp: file to check + * @arg: type of lease that we're trying to acquire + * + * The kernel will call into this operation to determine whether there + * are conflicting opens that may prevent the deleg from being granted. + * For nfsd, that check is done at a higher level, so this trivially + * returns 0. + */ +static int +nfsd4_deleg_lm_open_conflict(struct file *filp, int arg) +{ + return 0; +} + static const struct lease_manager_operations nfsd_lease_mng_ops = { .lm_breaker_owns_lease = nfsd_breaker_owns_lease, .lm_break = nfsd_break_deleg_cb, .lm_change = nfsd_change_deleg_cb, + .lm_open_conflict = nfsd4_deleg_lm_open_conflict, }; static __be32 nfsd4_check_seqid(struct nfsd4_compound_state *cstate, struct nfs4_stateowner *so, u32 seqid) diff --git a/include/linux/filelock.h b/include/linux/filelock.h index 54b824c05299..2f5e5588ee07 100644 --- a/include/linux/filelock.h +++ b/include/linux/filelock.h @@ -49,6 +49,7 @@ struct lease_manager_operations { int (*lm_change)(struct file_lease *, int, struct list_head *); void (*lm_setup)(struct file_lease *, void **); bool (*lm_breaker_owns_lease)(struct file_lease *); + int (*lm_open_conflict)(struct file *, int); }; struct lock_manager { From ececfba255bf3616301419e47a5c824e04b60ab8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 11 Dec 2025 14:05:01 +0100 Subject: [PATCH 008/283] ARM: dts: ixp4xx: Fix up Actiontec MI424WR DTS files The KS8995 switch was unconditionally wired to EthC (eth1) on both MI424WR variants, this is wrong: the D revision has the switch connected to EthB (eth0) so pull this assingment out of the generic MI424WR DTSI file and make it a property of the respective variants instead. Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251211-ixp4xx-actiontec-dts-fix-v1-1-97af8e79d474@kernel.org Signed-off-by: Krzysztof Kozlowski --- .../intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts | 11 +++++++++++ .../intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts | 11 +++++++++++ .../dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi | 1 - 3 files changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts index 413b9255f9e3..19a8d7b07758 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts @@ -12,6 +12,17 @@ model = "Actiontec MI424WR rev A/C"; compatible = "actiontec,mi424wr-ac", "intel,ixp42x"; + /* Connect the switch to EthC */ + spi { + ethernet-switch@0 { + ethernet-ports { + ethernet-port@4 { + ethernet = <ðc>; + }; + }; + }; + }; + soc { /* EthB used for WAN */ ethernet@c8009000 { diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts index 3619c6411a5c..244c6ea0973f 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts @@ -12,6 +12,17 @@ model = "Actiontec MI424WR rev D"; compatible = "actiontec,mi424wr-d", "intel,ixp42x"; + /* Connect the switch to EthB */ + spi { + ethernet-switch@0 { + ethernet-ports { + ethernet-port@4 { + ethernet = <ðb>; + }; + }; + }; + }; + soc { /* EthB used for LAN */ ethernet@c8009000 { diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi index 76fd97c5beb6..9b54e3c01a34 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi @@ -152,7 +152,6 @@ }; ethernet-port@4 { reg = <4>; - ethernet = <ðc>; phy-mode = "mii"; fixed-link { speed = <100>; From f371d2afd5453f9ab9a690700bfdaa70fe1e7c2b Mon Sep 17 00:00:00 2001 From: Philipp Stanner Date: Mon, 8 Dec 2025 15:07:15 +0100 Subject: [PATCH 009/283] MAINTAINERS: Update Nova GPU driver git link Nova driver development has been moved to a different git repository. Update the MAINTAINERS entry to reflect that. Reported-by: Gary Guo Signed-off-by: Philipp Stanner Link: https://patch.msgid.link/20251208140713.41330-3-phasta@kernel.org Signed-off-by: Danilo Krummrich --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5b11839cba9d..852281f1cc39 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8067,7 +8067,7 @@ W: https://rust-for-linux.com/nova-gpu-driver Q: https://patchwork.freedesktop.org/project/nouveau/ B: https://gitlab.freedesktop.org/drm/nova/-/issues C: irc://irc.oftc.net/nouveau -T: git https://gitlab.freedesktop.org/drm/nova.git nova-next +T: git https://gitlab.freedesktop.org/drm/rust/kernel.git drm-rust-next F: Documentation/gpu/nova/ F: drivers/gpu/nova-core/ @@ -8079,7 +8079,7 @@ W: https://rust-for-linux.com/nova-gpu-driver Q: https://patchwork.freedesktop.org/project/nouveau/ B: https://gitlab.freedesktop.org/drm/nova/-/issues C: irc://irc.oftc.net/nouveau -T: git https://gitlab.freedesktop.org/drm/nova.git nova-next +T: git https://gitlab.freedesktop.org/drm/rust/kernel.git drm-rust-next F: Documentation/gpu/nova/ F: drivers/gpu/drm/nova/ F: include/uapi/drm/nova_drm.h From 3d3352e73a55a4ccf110f8b3419bbe2fbfd8a030 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Wed, 5 Nov 2025 09:40:09 +0900 Subject: [PATCH 010/283] gpu: nova-core: select RUST_FW_LOADER_ABSTRACTIONS RUST_FW_LOADER_ABSTRACTIONS was depended on by NOVA_CORE, but NOVA_CORE is selected by DRM_NOVA. This creates a situation where, if DRM_NOVA is selected, NOVA_CORE gets enabled but not RUST_FW_LOADER_ABSTRACTIONS, which results in a build error. Since the firmware loader is an implementation detail of the driver, it should be enabled along with it, so change the "depends on" to a "select". Fixes: 54e6baf123fd ("gpu: nova-core: add initial driver stub") Closes: https://lore.kernel.org/oe-kbuild-all/202512061721.rxKGnt5q-lkp@intel.com/ Tested-by: Alyssa Ross Acked-by: Danilo Krummrich Link: https://patch.msgid.link/20251106-b4-select-rust-fw-v3-2-771172257755@nvidia.com Signed-off-by: Alexandre Courbot --- drivers/gpu/nova-core/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/nova-core/Kconfig b/drivers/gpu/nova-core/Kconfig index 20d3e6d0d796..527920f9c4d3 100644 --- a/drivers/gpu/nova-core/Kconfig +++ b/drivers/gpu/nova-core/Kconfig @@ -3,7 +3,7 @@ config NOVA_CORE depends on 64BIT depends on PCI depends on RUST - depends on RUST_FW_LOADER_ABSTRACTIONS + select RUST_FW_LOADER_ABSTRACTIONS select AUXILIARY_BUS default n help From b6c76518233e876a0f26e66b83643891c0f341db Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Tue, 16 Dec 2025 11:57:07 +0900 Subject: [PATCH 011/283] gpu: nova-core: bindings: add missing explicit padding Explicit padding is needed in order to avoid uninitialized bytes and safely implement `AsBytes`. The `--explicit-padding` of bindgen was omitted by mistake when these bindings were generated. Fixes: 13f85988d4fa ("gpu: nova-core: gsp: Retrieve GSP static info to gather GPU information") Reviewed-by: Lyude Paul Reviewed-by: Joel Fernandes Acked-by: Danilo Krummrich Link: https://patch.msgid.link/20251216-nova-fixes-v3-1-c7469a71f7c4@nvidia.com Signed-off-by: Alexandre Courbot --- drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs b/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs index 5bcfbcd1ad22..5f0569dcc4a0 100644 --- a/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs +++ b/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs @@ -325,6 +325,7 @@ pub struct NV0080_CTRL_GPU_GET_SRIOV_CAPS_PARAMS { pub totalVFs: u32_, pub firstVfOffset: u32_, pub vfFeatureMask: u32_, + pub __bindgen_padding_0: [u8; 4usize], pub FirstVFBar0Address: u64_, pub FirstVFBar1Address: u64_, pub FirstVFBar2Address: u64_, @@ -340,6 +341,7 @@ pub struct NV0080_CTRL_GPU_GET_SRIOV_CAPS_PARAMS { pub bClientRmAllocatedCtxBuffer: u8_, pub bNonPowerOf2ChannelCountSupported: u8_, pub bVfResizableBAR1Supported: u8_, + pub __bindgen_padding_1: [u8; 7usize], } #[repr(C)] #[derive(Debug, Default, Copy, Clone)] @@ -347,11 +349,13 @@ pub struct NV2080_CTRL_BIOS_GET_SKU_INFO_PARAMS { pub BoardID: u32_, pub chipSKU: [ffi::c_char; 9usize], pub chipSKUMod: [ffi::c_char; 5usize], + pub __bindgen_padding_0: [u8; 2usize], pub skuConfigVersion: u32_, pub project: [ffi::c_char; 5usize], pub projectSKU: [ffi::c_char; 5usize], pub CDP: [ffi::c_char; 6usize], pub projectSKUMod: [ffi::c_char; 2usize], + pub __bindgen_padding_1: [u8; 2usize], pub businessCycle: u32_, } pub type NV2080_CTRL_CMD_FB_GET_FB_REGION_SURFACE_MEM_TYPE_FLAG = [u8_; 17usize]; @@ -371,6 +375,7 @@ pub struct NV2080_CTRL_CMD_FB_GET_FB_REGION_FB_REGION_INFO { #[derive(Debug, Default, Copy, Clone)] pub struct NV2080_CTRL_CMD_FB_GET_FB_REGION_INFO_PARAMS { pub numFBRegions: u32_, + pub __bindgen_padding_0: [u8; 4usize], pub fbRegion: [NV2080_CTRL_CMD_FB_GET_FB_REGION_FB_REGION_INFO; 16usize], } #[repr(C)] @@ -495,13 +500,16 @@ pub struct FW_WPR_LAYOUT_OFFSET { #[derive(Debug, Copy, Clone)] pub struct GspStaticConfigInfo_t { pub grCapsBits: [u8_; 23usize], + pub __bindgen_padding_0: u8, pub gidInfo: NV2080_CTRL_GPU_GET_GID_INFO_PARAMS, pub SKUInfo: NV2080_CTRL_BIOS_GET_SKU_INFO_PARAMS, + pub __bindgen_padding_1: [u8; 4usize], pub fbRegionInfoParams: NV2080_CTRL_CMD_FB_GET_FB_REGION_INFO_PARAMS, pub sriovCaps: NV0080_CTRL_GPU_GET_SRIOV_CAPS_PARAMS, pub sriovMaxGfid: u32_, pub engineCaps: [u32_; 3usize], pub poisonFuseEnabled: u8_, + pub __bindgen_padding_2: [u8; 7usize], pub fb_length: u64_, pub fbio_mask: u64_, pub fb_bus_width: u32_, @@ -527,16 +535,20 @@ pub struct GspStaticConfigInfo_t { pub bIsMigSupported: u8_, pub RTD3GC6TotalBoardPower: u16_, pub RTD3GC6PerstDelay: u16_, + pub __bindgen_padding_3: [u8; 2usize], pub bar1PdeBase: u64_, pub bar2PdeBase: u64_, pub bVbiosValid: u8_, + pub __bindgen_padding_4: [u8; 3usize], pub vbiosSubVendor: u32_, pub vbiosSubDevice: u32_, pub bPageRetirementSupported: u8_, pub bSplitVasBetweenServerClientRm: u8_, pub bClRootportNeedsNosnoopWAR: u8_, + pub __bindgen_padding_5: u8, pub displaylessMaxHeads: VIRTUAL_DISPLAY_GET_NUM_HEADS_PARAMS, pub displaylessMaxResolution: VIRTUAL_DISPLAY_GET_MAX_RESOLUTION_PARAMS, + pub __bindgen_padding_6: [u8; 4usize], pub displaylessMaxPixels: u64_, pub hInternalClient: u32_, pub hInternalDevice: u32_, From 9d250ab0cf80deb11148efe862d1184ebf5115f6 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Tue, 16 Dec 2025 11:57:08 +0900 Subject: [PATCH 012/283] gpu: nova-core: gsp: fix length of received messages The size of messages' payload is miscalculated, leading to extra data passed to the message handler. While this is not a problem with our current set of commands, others with a variable-length payload may misbehave. Fix this by introducing a method returning the payload size and using it. Fixes: 75f6b1de8133 ("gpu: nova-core: gsp: Add GSP command queue bindings and handling") Reviewed-by: Lyude Paul Reviewed-by: Joel Fernandes Reviewed-by: Alistair Popple Acked-by: Danilo Krummrich Link: https://patch.msgid.link/20251216-nova-fixes-v3-2-c7469a71f7c4@nvidia.com [acourbot@nvidia.com: update `PANIC:` comments as pointed out by Joel.] Signed-off-by: Alexandre Courbot --- drivers/gpu/nova-core/gsp/cmdq.rs | 14 ++++++++------ drivers/gpu/nova-core/gsp/fw.rs | 13 +++++++++---- 2 files changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/nova-core/gsp/cmdq.rs b/drivers/gpu/nova-core/gsp/cmdq.rs index 6f946d14868a..3991ccc0c10f 100644 --- a/drivers/gpu/nova-core/gsp/cmdq.rs +++ b/drivers/gpu/nova-core/gsp/cmdq.rs @@ -588,21 +588,23 @@ impl Cmdq { header.length(), ); + let payload_length = header.payload_length(); + // Check that the driver read area is large enough for the message. - if slice_1.len() + slice_2.len() < header.length() { + if slice_1.len() + slice_2.len() < payload_length { return Err(EIO); } // Cut the message slices down to the actual length of the message. - let (slice_1, slice_2) = if slice_1.len() > header.length() { - // PANIC: we checked above that `slice_1` is at least as long as `msg_header.length()`. - (slice_1.split_at(header.length()).0, &slice_2[0..0]) + let (slice_1, slice_2) = if slice_1.len() > payload_length { + // PANIC: we checked above that `slice_1` is at least as long as `payload_length`. + (slice_1.split_at(payload_length).0, &slice_2[0..0]) } else { ( slice_1, // PANIC: we checked above that `slice_1.len() + slice_2.len()` is at least as - // large as `msg_header.length()`. - slice_2.split_at(header.length() - slice_1.len()).0, + // large as `payload_length`. + slice_2.split_at(payload_length - slice_1.len()).0, ) }; diff --git a/drivers/gpu/nova-core/gsp/fw.rs b/drivers/gpu/nova-core/gsp/fw.rs index abffd6beec65..7b8e710b33e7 100644 --- a/drivers/gpu/nova-core/gsp/fw.rs +++ b/drivers/gpu/nova-core/gsp/fw.rs @@ -853,11 +853,16 @@ impl GspMsgElement { self.inner.checkSum = checksum; } - /// Returns the total length of the message. + /// Returns the length of the message's payload. + pub(crate) fn payload_length(&self) -> usize { + // `rpc.length` includes the length of the RPC message header. + num::u32_as_usize(self.inner.rpc.length) + .saturating_sub(size_of::()) + } + + /// Returns the total length of the message, message and RPC headers included. pub(crate) fn length(&self) -> usize { - // `rpc.length` includes the length of the GspRpcHeader but not the message header. - size_of::() - size_of::() - + num::u32_as_usize(self.inner.rpc.length) + size_of::() + self.payload_length() } // Returns the sequence number of the message. From 523317152c4b1b3187d14c65ceacdfc0da451931 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Tue, 16 Dec 2025 11:57:09 +0900 Subject: [PATCH 013/283] gpu: nova-core: bindings: derive `MaybeZeroable` Commit 4846300ba8f9 ("rust: derive `Zeroable` for all structs & unions generated by bindgen where possible") automatically derives `MaybeZeroable` for all bindings. This is better than selectively deriving `Zeroable` as it ensures all types that can implement `Zeroable` do. Regenerate the nova-core bindings so they benefit from this, and remove a now unneeded implementation of `Zeroable`. Fixes: 75f6b1de8133 ("gpu: nova-core: gsp: Add GSP command queue bindings and handling") Reviewed-by: Lyude Paul Reviewed-by: Joel Fernandes Acked-by: Danilo Krummrich Link: https://patch.msgid.link/20251216-nova-fixes-v3-3-c7469a71f7c4@nvidia.com Signed-off-by: Alexandre Courbot --- drivers/gpu/nova-core/gsp/fw.rs | 7 -- drivers/gpu/nova-core/gsp/fw/r570_144.rs | 11 ++- .../gpu/nova-core/gsp/fw/r570_144/bindings.rs | 93 ++++++++++--------- 3 files changed, 54 insertions(+), 57 deletions(-) diff --git a/drivers/gpu/nova-core/gsp/fw.rs b/drivers/gpu/nova-core/gsp/fw.rs index 7b8e710b33e7..b754631d2d8d 100644 --- a/drivers/gpu/nova-core/gsp/fw.rs +++ b/drivers/gpu/nova-core/gsp/fw.rs @@ -797,13 +797,6 @@ impl bindings::rpc_message_header_v { } } -// SAFETY: We can't derive the Zeroable trait for this binding because the -// procedural macro doesn't support the syntax used by bindgen to create the -// __IncompleteArrayField types. So instead we implement it here, which is safe -// because these are explicitly padded structures only containing types for -// which any bit pattern, including all zeros, is valid. -unsafe impl Zeroable for bindings::rpc_message_header_v {} - /// GSP Message Element. /// /// This is essentially a message header expected to be followed by the message data. diff --git a/drivers/gpu/nova-core/gsp/fw/r570_144.rs b/drivers/gpu/nova-core/gsp/fw/r570_144.rs index 048234d1a9d1..e99d315ae74c 100644 --- a/drivers/gpu/nova-core/gsp/fw/r570_144.rs +++ b/drivers/gpu/nova-core/gsp/fw/r570_144.rs @@ -24,8 +24,11 @@ unreachable_pub, unsafe_op_in_unsafe_fn )] -use kernel::{ - ffi, - prelude::Zeroable, // -}; +use kernel::ffi; +use pin_init::MaybeZeroable; + include!("r570_144/bindings.rs"); + +// SAFETY: This type has a size of zero, so its inclusion into another type should not affect their +// ability to implement `Zeroable`. +unsafe impl kernel::prelude::Zeroable for __IncompleteArrayField {} diff --git a/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs b/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs index 5f0569dcc4a0..6d25fe0bffa9 100644 --- a/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs +++ b/drivers/gpu/nova-core/gsp/fw/r570_144/bindings.rs @@ -320,7 +320,7 @@ pub const NV_VGPU_MSG_EVENT_RECOVERY_ACTION: _bindgen_ty_3 = 4130; pub const NV_VGPU_MSG_EVENT_NUM_EVENTS: _bindgen_ty_3 = 4131; pub type _bindgen_ty_3 = ffi::c_uint; #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct NV0080_CTRL_GPU_GET_SRIOV_CAPS_PARAMS { pub totalVFs: u32_, pub firstVfOffset: u32_, @@ -344,7 +344,7 @@ pub struct NV0080_CTRL_GPU_GET_SRIOV_CAPS_PARAMS { pub __bindgen_padding_1: [u8; 7usize], } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct NV2080_CTRL_BIOS_GET_SKU_INFO_PARAMS { pub BoardID: u32_, pub chipSKU: [ffi::c_char; 9usize], @@ -360,7 +360,7 @@ pub struct NV2080_CTRL_BIOS_GET_SKU_INFO_PARAMS { } pub type NV2080_CTRL_CMD_FB_GET_FB_REGION_SURFACE_MEM_TYPE_FLAG = [u8_; 17usize]; #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct NV2080_CTRL_CMD_FB_GET_FB_REGION_FB_REGION_INFO { pub base: u64_, pub limit: u64_, @@ -372,14 +372,14 @@ pub struct NV2080_CTRL_CMD_FB_GET_FB_REGION_FB_REGION_INFO { pub blackList: NV2080_CTRL_CMD_FB_GET_FB_REGION_SURFACE_MEM_TYPE_FLAG, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct NV2080_CTRL_CMD_FB_GET_FB_REGION_INFO_PARAMS { pub numFBRegions: u32_, pub __bindgen_padding_0: [u8; 4usize], pub fbRegion: [NV2080_CTRL_CMD_FB_GET_FB_REGION_FB_REGION_INFO; 16usize], } #[repr(C)] -#[derive(Debug, Copy, Clone)] +#[derive(Debug, Copy, Clone, MaybeZeroable)] pub struct NV2080_CTRL_GPU_GET_GID_INFO_PARAMS { pub index: u32_, pub flags: u32_, @@ -396,14 +396,14 @@ impl Default for NV2080_CTRL_GPU_GET_GID_INFO_PARAMS { } } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct DOD_METHOD_DATA { pub status: u32_, pub acpiIdListLen: u32_, pub acpiIdList: [u32_; 16usize], } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct JT_METHOD_DATA { pub status: u32_, pub jtCaps: u32_, @@ -412,14 +412,14 @@ pub struct JT_METHOD_DATA { pub __bindgen_padding_0: u8, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct MUX_METHOD_DATA_ELEMENT { pub acpiId: u32_, pub mode: u32_, pub status: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct MUX_METHOD_DATA { pub tableLen: u32_, pub acpiIdMuxModeTable: [MUX_METHOD_DATA_ELEMENT; 16usize], @@ -427,13 +427,13 @@ pub struct MUX_METHOD_DATA { pub acpiIdMuxStateTable: [MUX_METHOD_DATA_ELEMENT; 16usize], } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct CAPS_METHOD_DATA { pub status: u32_, pub optimusCaps: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct ACPI_METHOD_DATA { pub bValid: u8_, pub __bindgen_padding_0: [u8; 3usize], @@ -443,20 +443,20 @@ pub struct ACPI_METHOD_DATA { pub capsMethodData: CAPS_METHOD_DATA, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct VIRTUAL_DISPLAY_GET_MAX_RESOLUTION_PARAMS { pub headIndex: u32_, pub maxHResolution: u32_, pub maxVResolution: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct VIRTUAL_DISPLAY_GET_NUM_HEADS_PARAMS { pub numHeads: u32_, pub maxNumHeads: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct BUSINFO { pub deviceID: u16_, pub vendorID: u16_, @@ -466,7 +466,7 @@ pub struct BUSINFO { pub __bindgen_padding_0: u8, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GSP_VF_INFO { pub totalVFs: u32_, pub firstVFOffset: u32_, @@ -479,25 +479,25 @@ pub struct GSP_VF_INFO { pub __bindgen_padding_0: [u8; 5usize], } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GSP_PCIE_CONFIG_REG { pub linkCap: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct EcidManufacturingInfo { pub ecidLow: u32_, pub ecidHigh: u32_, pub ecidExtended: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct FW_WPR_LAYOUT_OFFSET { pub nonWprHeapOffset: u64_, pub frtsOffset: u64_, } #[repr(C)] -#[derive(Debug, Copy, Clone)] +#[derive(Debug, Copy, Clone, MaybeZeroable)] pub struct GspStaticConfigInfo_t { pub grCapsBits: [u8_; 23usize], pub __bindgen_padding_0: u8, @@ -570,7 +570,7 @@ impl Default for GspStaticConfigInfo_t { } } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GspSystemInfo { pub gpuPhysAddr: u64_, pub gpuPhysFbAddr: u64_, @@ -627,7 +627,7 @@ pub struct GspSystemInfo { pub hostPageSize: u64_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct MESSAGE_QUEUE_INIT_ARGUMENTS { pub sharedMemPhysAddr: u64_, pub pageTableEntryCount: u32_, @@ -636,7 +636,7 @@ pub struct MESSAGE_QUEUE_INIT_ARGUMENTS { pub statQueueOffset: u64_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GSP_SR_INIT_ARGUMENTS { pub oldLevel: u32_, pub flags: u32_, @@ -644,7 +644,7 @@ pub struct GSP_SR_INIT_ARGUMENTS { pub __bindgen_padding_0: [u8; 3usize], } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GSP_ARGUMENTS_CACHED { pub messageQueueInitArguments: MESSAGE_QUEUE_INIT_ARGUMENTS, pub srInitArguments: GSP_SR_INIT_ARGUMENTS, @@ -654,13 +654,13 @@ pub struct GSP_ARGUMENTS_CACHED { pub profilerArgs: GSP_ARGUMENTS_CACHED__bindgen_ty_1, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GSP_ARGUMENTS_CACHED__bindgen_ty_1 { pub pa: u64_, pub size: u64_, } #[repr(C)] -#[derive(Copy, Clone, Zeroable)] +#[derive(Copy, Clone, MaybeZeroable)] pub union rpc_message_rpc_union_field_v03_00 { pub spare: u32_, pub cpuRmGfid: u32_, @@ -676,6 +676,7 @@ impl Default for rpc_message_rpc_union_field_v03_00 { } pub type rpc_message_rpc_union_field_v = rpc_message_rpc_union_field_v03_00; #[repr(C)] +#[derive(MaybeZeroable)] pub struct rpc_message_header_v03_00 { pub header_version: u32_, pub signature: u32_, @@ -698,7 +699,7 @@ impl Default for rpc_message_header_v03_00 { } pub type rpc_message_header_v = rpc_message_header_v03_00; #[repr(C)] -#[derive(Copy, Clone, Zeroable)] +#[derive(Copy, Clone, MaybeZeroable)] pub struct GspFwWprMeta { pub magic: u64_, pub revision: u64_, @@ -733,19 +734,19 @@ pub struct GspFwWprMeta { pub verified: u64_, } #[repr(C)] -#[derive(Copy, Clone, Zeroable)] +#[derive(Copy, Clone, MaybeZeroable)] pub union GspFwWprMeta__bindgen_ty_1 { pub __bindgen_anon_1: GspFwWprMeta__bindgen_ty_1__bindgen_ty_1, pub __bindgen_anon_2: GspFwWprMeta__bindgen_ty_1__bindgen_ty_2, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GspFwWprMeta__bindgen_ty_1__bindgen_ty_1 { pub sysmemAddrOfSignature: u64_, pub sizeOfSignature: u64_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GspFwWprMeta__bindgen_ty_1__bindgen_ty_2 { pub gspFwHeapFreeListWprOffset: u32_, pub unused0: u32_, @@ -761,13 +762,13 @@ impl Default for GspFwWprMeta__bindgen_ty_1 { } } #[repr(C)] -#[derive(Copy, Clone, Zeroable)] +#[derive(Copy, Clone, MaybeZeroable)] pub union GspFwWprMeta__bindgen_ty_2 { pub __bindgen_anon_1: GspFwWprMeta__bindgen_ty_2__bindgen_ty_1, pub __bindgen_anon_2: GspFwWprMeta__bindgen_ty_2__bindgen_ty_2, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GspFwWprMeta__bindgen_ty_2__bindgen_ty_1 { pub partitionRpcAddr: u64_, pub partitionRpcRequestOffset: u16_, @@ -779,7 +780,7 @@ pub struct GspFwWprMeta__bindgen_ty_2__bindgen_ty_1 { pub lsUcodeVersion: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GspFwWprMeta__bindgen_ty_2__bindgen_ty_2 { pub partitionRpcPadding: [u32_; 4usize], pub sysmemAddrOfCrashReportQueue: u64_, @@ -814,7 +815,7 @@ pub const LibosMemoryRegionLoc_LIBOS_MEMORY_REGION_LOC_SYSMEM: LibosMemoryRegion pub const LibosMemoryRegionLoc_LIBOS_MEMORY_REGION_LOC_FB: LibosMemoryRegionLoc = 2; pub type LibosMemoryRegionLoc = ffi::c_uint; #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct LibosMemoryRegionInitArgument { pub id8: LibosAddress, pub pa: LibosAddress, @@ -824,7 +825,7 @@ pub struct LibosMemoryRegionInitArgument { pub __bindgen_padding_0: [u8; 6usize], } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct PACKED_REGISTRY_ENTRY { pub nameOffset: u32_, pub type_: u8_, @@ -833,14 +834,14 @@ pub struct PACKED_REGISTRY_ENTRY { pub length: u32_, } #[repr(C)] -#[derive(Debug, Default)] +#[derive(Debug, Default, MaybeZeroable)] pub struct PACKED_REGISTRY_TABLE { pub size: u32_, pub numEntries: u32_, pub entries: __IncompleteArrayField, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct msgqTxHeader { pub version: u32_, pub size: u32_, @@ -852,13 +853,13 @@ pub struct msgqTxHeader { pub entryOff: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone, Zeroable)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct msgqRxHeader { pub readPtr: u32_, } #[repr(C)] #[repr(align(8))] -#[derive(Zeroable)] +#[derive(MaybeZeroable)] pub struct GSP_MSG_QUEUE_ELEMENT { pub authTagBuffer: [u8_; 16usize], pub aadBuffer: [u8_; 16usize], @@ -878,7 +879,7 @@ impl Default for GSP_MSG_QUEUE_ELEMENT { } } #[repr(C)] -#[derive(Debug, Default)] +#[derive(Debug, Default, MaybeZeroable)] pub struct rpc_run_cpu_sequencer_v17_00 { pub bufferSizeDWord: u32_, pub cmdIndex: u32_, @@ -896,20 +897,20 @@ pub const GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_WAIT_FOR_HALT: GSP_SEQ_BUF_ pub const GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_RESUME: GSP_SEQ_BUF_OPCODE = 8; pub type GSP_SEQ_BUF_OPCODE = ffi::c_uint; #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GSP_SEQ_BUF_PAYLOAD_REG_WRITE { pub addr: u32_, pub val: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GSP_SEQ_BUF_PAYLOAD_REG_MODIFY { pub addr: u32_, pub mask: u32_, pub val: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GSP_SEQ_BUF_PAYLOAD_REG_POLL { pub addr: u32_, pub mask: u32_, @@ -918,24 +919,24 @@ pub struct GSP_SEQ_BUF_PAYLOAD_REG_POLL { pub error: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GSP_SEQ_BUF_PAYLOAD_DELAY_US { pub val: u32_, } #[repr(C)] -#[derive(Debug, Default, Copy, Clone)] +#[derive(Debug, Default, Copy, Clone, MaybeZeroable)] pub struct GSP_SEQ_BUF_PAYLOAD_REG_STORE { pub addr: u32_, pub index: u32_, } #[repr(C)] -#[derive(Copy, Clone)] +#[derive(Copy, Clone, MaybeZeroable)] pub struct GSP_SEQUENCER_BUFFER_CMD { pub opCode: GSP_SEQ_BUF_OPCODE, pub payload: GSP_SEQUENCER_BUFFER_CMD__bindgen_ty_1, } #[repr(C)] -#[derive(Copy, Clone)] +#[derive(Copy, Clone, MaybeZeroable)] pub union GSP_SEQUENCER_BUFFER_CMD__bindgen_ty_1 { pub regWrite: GSP_SEQ_BUF_PAYLOAD_REG_WRITE, pub regModify: GSP_SEQ_BUF_PAYLOAD_REG_MODIFY, From b58c87b0fde0ac06d550659a7e3ddbcd9183b7b9 Mon Sep 17 00:00:00 2001 From: Alexandre Courbot Date: Tue, 16 Dec 2025 11:57:10 +0900 Subject: [PATCH 014/283] gpu: nova-core: gsp: replace firmware version with "bindings" alias We have an "bindings" alias to avoid having to mention the firmware version again and again, and limit the diff when upgrading the firmware. Use it where we neglected to. Fixes: eaf0989c77e4 ("gpu: nova-core: Add bindings required by GSP sequencer") Reviewed-by: Lyude Paul Reviewed-by: Joel Fernandes Acked-by: Danilo Krummrich Link: https://patch.msgid.link/20251216-nova-fixes-v3-4-c7469a71f7c4@nvidia.com Signed-off-by: Alexandre Courbot --- drivers/gpu/nova-core/gsp/fw.rs | 58 ++++++++++++++++----------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/nova-core/gsp/fw.rs b/drivers/gpu/nova-core/gsp/fw.rs index b754631d2d8d..caeb0d251fe5 100644 --- a/drivers/gpu/nova-core/gsp/fw.rs +++ b/drivers/gpu/nova-core/gsp/fw.rs @@ -141,8 +141,8 @@ unsafe impl AsBytes for GspFwWprMeta {} // are valid. unsafe impl FromBytes for GspFwWprMeta {} -type GspFwWprMetaBootResumeInfo = r570_144::GspFwWprMeta__bindgen_ty_1; -type GspFwWprMetaBootInfo = r570_144::GspFwWprMeta__bindgen_ty_1__bindgen_ty_1; +type GspFwWprMetaBootResumeInfo = bindings::GspFwWprMeta__bindgen_ty_1; +type GspFwWprMetaBootInfo = bindings::GspFwWprMeta__bindgen_ty_1__bindgen_ty_1; impl GspFwWprMeta { /// Fill in and return a `GspFwWprMeta` suitable for booting `gsp_firmware` using the @@ -150,8 +150,8 @@ impl GspFwWprMeta { pub(crate) fn new(gsp_firmware: &GspFirmware, fb_layout: &FbLayout) -> Self { Self(bindings::GspFwWprMeta { // CAST: we want to store the bits of `GSP_FW_WPR_META_MAGIC` unmodified. - magic: r570_144::GSP_FW_WPR_META_MAGIC as u64, - revision: u64::from(r570_144::GSP_FW_WPR_META_REVISION), + magic: bindings::GSP_FW_WPR_META_MAGIC as u64, + revision: u64::from(bindings::GSP_FW_WPR_META_REVISION), sysmemAddrOfRadix3Elf: gsp_firmware.radix3_dma_handle(), sizeOfRadix3Elf: u64::from_safe_cast(gsp_firmware.size), sysmemAddrOfBootloader: gsp_firmware.bootloader.ucode.dma_handle(), @@ -315,19 +315,19 @@ impl From for u32 { #[repr(u32)] pub(crate) enum SeqBufOpcode { // Core operation opcodes - CoreReset = r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_RESET, - CoreResume = r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_RESUME, - CoreStart = r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_START, - CoreWaitForHalt = r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_WAIT_FOR_HALT, + CoreReset = bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_RESET, + CoreResume = bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_RESUME, + CoreStart = bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_START, + CoreWaitForHalt = bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_WAIT_FOR_HALT, // Delay opcode - DelayUs = r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_DELAY_US, + DelayUs = bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_DELAY_US, // Register operation opcodes - RegModify = r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_MODIFY, - RegPoll = r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_POLL, - RegStore = r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_STORE, - RegWrite = r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_WRITE, + RegModify = bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_MODIFY, + RegPoll = bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_POLL, + RegStore = bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_STORE, + RegWrite = bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_WRITE, } impl fmt::Display for SeqBufOpcode { @@ -351,25 +351,25 @@ impl TryFrom for SeqBufOpcode { fn try_from(value: u32) -> Result { match value { - r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_RESET => { + bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_RESET => { Ok(SeqBufOpcode::CoreReset) } - r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_RESUME => { + bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_RESUME => { Ok(SeqBufOpcode::CoreResume) } - r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_START => { + bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_START => { Ok(SeqBufOpcode::CoreStart) } - r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_WAIT_FOR_HALT => { + bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_CORE_WAIT_FOR_HALT => { Ok(SeqBufOpcode::CoreWaitForHalt) } - r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_DELAY_US => Ok(SeqBufOpcode::DelayUs), - r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_MODIFY => { + bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_DELAY_US => Ok(SeqBufOpcode::DelayUs), + bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_MODIFY => { Ok(SeqBufOpcode::RegModify) } - r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_POLL => Ok(SeqBufOpcode::RegPoll), - r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_STORE => Ok(SeqBufOpcode::RegStore), - r570_144::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_WRITE => Ok(SeqBufOpcode::RegWrite), + bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_POLL => Ok(SeqBufOpcode::RegPoll), + bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_STORE => Ok(SeqBufOpcode::RegStore), + bindings::GSP_SEQ_BUF_OPCODE_GSP_SEQ_BUF_OPCODE_REG_WRITE => Ok(SeqBufOpcode::RegWrite), _ => Err(EINVAL), } } @@ -385,7 +385,7 @@ impl From for u32 { /// Wrapper for GSP sequencer register write payload. #[repr(transparent)] #[derive(Copy, Clone)] -pub(crate) struct RegWritePayload(r570_144::GSP_SEQ_BUF_PAYLOAD_REG_WRITE); +pub(crate) struct RegWritePayload(bindings::GSP_SEQ_BUF_PAYLOAD_REG_WRITE); impl RegWritePayload { /// Returns the register address. @@ -408,7 +408,7 @@ unsafe impl AsBytes for RegWritePayload {} /// Wrapper for GSP sequencer register modify payload. #[repr(transparent)] #[derive(Copy, Clone)] -pub(crate) struct RegModifyPayload(r570_144::GSP_SEQ_BUF_PAYLOAD_REG_MODIFY); +pub(crate) struct RegModifyPayload(bindings::GSP_SEQ_BUF_PAYLOAD_REG_MODIFY); impl RegModifyPayload { /// Returns the register address. @@ -436,7 +436,7 @@ unsafe impl AsBytes for RegModifyPayload {} /// Wrapper for GSP sequencer register poll payload. #[repr(transparent)] #[derive(Copy, Clone)] -pub(crate) struct RegPollPayload(r570_144::GSP_SEQ_BUF_PAYLOAD_REG_POLL); +pub(crate) struct RegPollPayload(bindings::GSP_SEQ_BUF_PAYLOAD_REG_POLL); impl RegPollPayload { /// Returns the register address. @@ -469,7 +469,7 @@ unsafe impl AsBytes for RegPollPayload {} /// Wrapper for GSP sequencer delay payload. #[repr(transparent)] #[derive(Copy, Clone)] -pub(crate) struct DelayUsPayload(r570_144::GSP_SEQ_BUF_PAYLOAD_DELAY_US); +pub(crate) struct DelayUsPayload(bindings::GSP_SEQ_BUF_PAYLOAD_DELAY_US); impl DelayUsPayload { /// Returns the delay value in microseconds. @@ -487,7 +487,7 @@ unsafe impl AsBytes for DelayUsPayload {} /// Wrapper for GSP sequencer register store payload. #[repr(transparent)] #[derive(Copy, Clone)] -pub(crate) struct RegStorePayload(r570_144::GSP_SEQ_BUF_PAYLOAD_REG_STORE); +pub(crate) struct RegStorePayload(bindings::GSP_SEQ_BUF_PAYLOAD_REG_STORE); impl RegStorePayload { /// Returns the register address. @@ -510,7 +510,7 @@ unsafe impl AsBytes for RegStorePayload {} /// Wrapper for GSP sequencer buffer command. #[repr(transparent)] -pub(crate) struct SequencerBufferCmd(r570_144::GSP_SEQUENCER_BUFFER_CMD); +pub(crate) struct SequencerBufferCmd(bindings::GSP_SEQUENCER_BUFFER_CMD); impl SequencerBufferCmd { /// Returns the opcode as a `SeqBufOpcode` enum, or error if invalid. @@ -612,7 +612,7 @@ unsafe impl AsBytes for SequencerBufferCmd {} /// Wrapper for GSP run CPU sequencer RPC. #[repr(transparent)] -pub(crate) struct RunCpuSequencer(r570_144::rpc_run_cpu_sequencer_v17_00); +pub(crate) struct RunCpuSequencer(bindings::rpc_run_cpu_sequencer_v17_00); impl RunCpuSequencer { /// Returns the command index. From 7ee19a59a75e3d5b9ec00499b86af8e2a46fbe86 Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Mon, 1 Dec 2025 12:47:14 -0800 Subject: [PATCH 015/283] btrfs: fix qgroup_snapshot_quick_inherit() squota bug qgroup_snapshot_quick_inherit() detects conditions where the snapshot destination would land in the same parent qgroup as the snapshot source subvolume. In this case we can avoid costly qgroup calculations and just add the nodesize of the new snapshot to the parent. However, in the case of squotas this is actually a double count, and also an undercount for deeper qgroup nestings. The following annotated script shows the issue: btrfs quota enable --simple "$mnt" # Create 2-level qgroup hierarchy btrfs qgroup create 2/100 "$mnt" # Q2 (level 2) btrfs qgroup create 1/100 "$mnt" # Q1 (level 1) btrfs qgroup assign 1/100 2/100 "$mnt" # Create base subvolume btrfs subvolume create "$mnt/base" >/dev/null base_id=$(btrfs subvolume show "$mnt/base" | grep 'Subvolume ID:' | awk '{print $3}') # Create intermediate snapshot and add to Q1 btrfs subvolume snapshot "$mnt/base" "$mnt/intermediate" >/dev/null inter_id=$(btrfs subvolume show "$mnt/intermediate" | grep 'Subvolume ID:' | awk '{print $3}') btrfs qgroup assign "0/$inter_id" 1/100 "$mnt" # Create working snapshot with --inherit (auto-adds to Q1) # src=intermediate (in only Q1) # dst=snap (inheriting only into Q1) # This double counts the 16k nodesize of the snapshot in Q1, and # undercounts it in Q2. btrfs subvolume snapshot -i 1/100 "$mnt/intermediate" "$mnt/snap" >/dev/null snap_id=$(btrfs subvolume show "$mnt/snap" | grep 'Subvolume ID:' | awk '{print $3}') # Fully complete snapshot creation sync # Delete working snapshot # Q1 and Q2 will lose the full snap usage btrfs subvolume delete "$mnt/snap" >/dev/null # Delete intermediate and remove from Q1 # Q1 and Q2 will lose the full intermediate usage btrfs qgroup remove "0/$inter_id" 1/100 "$mnt" btrfs subvolume delete "$mnt/intermediate" >/dev/null # Q1 should be at 0, but still has 16k. Q2 is "correct" at 0 (for now...) # Trigger cleaner, wait for deletions mount -o remount,sync=1 "$mnt" btrfs subvolume sync "$mnt" "$snap_id" btrfs subvolume sync "$mnt" "$inter_id" # Remove Q1 from Q2 # Frees 16k more from Q2, underflowing it to 16EiB btrfs qgroup remove 1/100 2/100 "$mnt" # And show the bad state: btrfs qgroup show -pc "$mnt" Qgroupid Referenced Exclusive Parent Child Path -------- ---------- --------- ------ ----- ---- 0/5 16.00KiB 16.00KiB - - 0/256 16.00KiB 16.00KiB - - base 1/100 16.00KiB 16.00KiB - - <0 member qgroups> 2/100 16.00EiB 16.00EiB - - <0 member qgroups> Fix this by simply not doing this quick inheritance with squotas. I suspect that it is also wrong in normal qgroups to not recurse up the qgroup tree in the quick inherit case, though other consistency checks will likely fix it anyway. Fixes: b20fe56cd285 ("btrfs: qgroup: allow quick inherit if snapshot is created and added to the same parent") Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index d9d8d9968a58..904d2a05e63a 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -3211,6 +3211,9 @@ static int qgroup_snapshot_quick_inherit(struct btrfs_fs_info *fs_info, struct btrfs_qgroup_list *list; int nr_parents = 0; + if (btrfs_qgroup_mode(fs_info) != BTRFS_QGROUP_MODE_FULL) + return 0; + src = find_qgroup_rb(fs_info, srcid); if (!src) return -ENOENT; From 68d4b3fa18d72b7f649e83012e7e08f1881f6b75 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Thu, 4 Dec 2025 14:38:23 +1030 Subject: [PATCH 016/283] btrfs: qgroup: update all parent qgroups when doing quick inherit [BUG] There is a bug that if a subvolume has multi-level parent qgroups, and is able to do a quick inherit, only the direct parent qgroup got updated: mkfs.btrfs -f -O quota $dev mount $dev $mnt btrfs subv create $mnt/subv1 btrfs qgroup create 1/100 $mnt btrfs qgroup create 2/100 $mnt btrfs qgroup assign 1/100 2/100 $mnt btrfs qgroup assign 0/256 1/100 $mnt btrfs qgroup show -p --sync $mnt Qgroupid Referenced Exclusive Parent Path -------- ---------- --------- ------ ---- 0/5 16.00KiB 16.00KiB - 0/256 16.00KiB 16.00KiB 1/100 subv1 1/100 16.00KiB 16.00KiB 2/100 2/100<1 member qgroup> 2/100 16.00KiB 16.00KiB - <0 member qgroups> btrfs subv snap -i 1/100 $mnt/subv1 $mnt/snap1 btrfs qgroup show -p --sync $mnt Qgroupid Referenced Exclusive Parent Path -------- ---------- --------- ------ ---- 0/5 16.00KiB 16.00KiB - 0/256 16.00KiB 16.00KiB 1/100 subv1 0/257 16.00KiB 16.00KiB 1/100 snap1 1/100 32.00KiB 32.00KiB 2/100 2/100<1 member qgroup> 2/100 16.00KiB 16.00KiB - <0 member qgroups> # Note that 2/100 is not updated, and qgroup numbers are inconsistent umount $mnt [CAUSE] If the snapshot source subvolume belongs to a parent qgroup, and the new snapshot target is also added to the new same parent qgroup, we allow a quick update without marking qgroup inconsistent. But that quick update only update the parent qgroup, without checking if there is any more parent qgroups. [FIX] Iterate through all parent qgroups during the quick inherit. Reported-by: Boris Burkov Fixes: b20fe56cd285 ("btrfs: qgroup: allow quick inherit if snapshot is created and added to the same parent") Reviewed-by: Boris Burkov Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 904d2a05e63a..206587820fec 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -3208,7 +3208,10 @@ static int qgroup_snapshot_quick_inherit(struct btrfs_fs_info *fs_info, { struct btrfs_qgroup *src; struct btrfs_qgroup *parent; + struct btrfs_qgroup *qgroup; struct btrfs_qgroup_list *list; + LIST_HEAD(qgroup_list); + const u32 nodesize = fs_info->nodesize; int nr_parents = 0; if (btrfs_qgroup_mode(fs_info) != BTRFS_QGROUP_MODE_FULL) @@ -3248,8 +3251,19 @@ static int qgroup_snapshot_quick_inherit(struct btrfs_fs_info *fs_info, if (parent->excl != parent->rfer) return 1; - parent->excl += fs_info->nodesize; - parent->rfer += fs_info->nodesize; + qgroup_iterator_add(&qgroup_list, parent); + list_for_each_entry(qgroup, &qgroup_list, iterator) { + qgroup->rfer += nodesize; + qgroup->rfer_cmpr += nodesize; + qgroup->excl += nodesize; + qgroup->excl_cmpr += nodesize; + qgroup_dirty(fs_info, qgroup); + + /* Append parent qgroups to @qgroup_list. */ + list_for_each_entry(list, &qgroup->groups, next_group) + qgroup_iterator_add(&qgroup_list, list->group); + } + qgroup_iterator_clean(&qgroup_list); return 0; } From f157dd661339fc6f5f2b574fe2429c43bd309534 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Miquel=20Sabat=C3=A9=20Sol=C3=A0?= Date: Tue, 21 Oct 2025 11:11:25 +0200 Subject: [PATCH 017/283] btrfs: fix NULL dereference on root when tracing inode eviction MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When evicting an inode the first thing we do is to setup tracing for it, which implies fetching the root's id. But in btrfs_evict_inode() the root might be NULL, as implied in the next check that we do in btrfs_evict_inode(). Hence, we either should set the ->root_objectid to 0 in case the root is NULL, or we move tracing setup after checking that the root is not NULL. Setting the rootid to 0 at least gives us the possibility to trace this call even in the case when the root is NULL, so that's the solution taken here. Fixes: 1abe9b8a138c ("Btrfs: add initial tracepoint support for btrfs") Reported-by: syzbot+d991fea1b4b23b1f6bf8@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d991fea1b4b23b1f6bf8 Signed-off-by: Miquel Sabaté Solà Reviewed-by: David Sterba Signed-off-by: David Sterba --- include/trace/events/btrfs.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/trace/events/btrfs.h b/include/trace/events/btrfs.h index 7e418f065b94..125bdc166bfe 100644 --- a/include/trace/events/btrfs.h +++ b/include/trace/events/btrfs.h @@ -224,7 +224,8 @@ DECLARE_EVENT_CLASS(btrfs__inode, __entry->generation = BTRFS_I(inode)->generation; __entry->last_trans = BTRFS_I(inode)->last_trans; __entry->logged_trans = BTRFS_I(inode)->logged_trans; - __entry->root_objectid = btrfs_root_id(BTRFS_I(inode)->root); + __entry->root_objectid = BTRFS_I(inode)->root ? + btrfs_root_id(BTRFS_I(inode)->root) : 0; ), TP_printk_btrfs("root=%llu(%s) gen=%llu ino=%llu blocks=%llu " From 5037b342825df7094a4906d1e2a9674baab50cb2 Mon Sep 17 00:00:00 2001 From: Robbie Ko Date: Thu, 11 Dec 2025 13:30:33 +0800 Subject: [PATCH 018/283] btrfs: fix deadlock in wait_current_trans() due to ignored transaction type When wait_current_trans() is called during start_transaction(), it currently waits for a blocked transaction without considering whether the given transaction type actually needs to wait for that particular transaction state. The btrfs_blocked_trans_types[] array already defines which transaction types should wait for which transaction states, but this check was missing in wait_current_trans(). This can lead to a deadlock scenario involving two transactions and pending ordered extents: 1. Transaction A is in TRANS_STATE_COMMIT_DOING state 2. A worker processing an ordered extent calls start_transaction() with TRANS_JOIN 3. join_transaction() returns -EBUSY because Transaction A is in TRANS_STATE_COMMIT_DOING 4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes 5. A new Transaction B is created (TRANS_STATE_RUNNING) 6. The ordered extent from step 2 is added to Transaction B's pending ordered extents 7. Transaction B immediately starts commit by another task and enters TRANS_STATE_COMMIT_START 8. The worker finally reaches wait_current_trans(), sees Transaction B in TRANS_STATE_COMMIT_START (a blocked state), and waits unconditionally 9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START according to btrfs_blocked_trans_types[] 10. Transaction B is waiting for pending ordered extents to complete 11. Deadlock: Transaction B waits for ordered extent, ordered extent waits for Transaction B This can be illustrated by the following call stacks: CPU0 CPU1 btrfs_finish_ordered_io() start_transaction(TRANS_JOIN) join_transaction() # -EBUSY (Transaction A is # TRANS_STATE_COMMIT_DOING) # Transaction A completes # Transaction B created # ordered extent added to # Transaction B's pending list btrfs_commit_transaction() # Transaction B enters # TRANS_STATE_COMMIT_START # waiting for pending ordered # extents wait_current_trans() # waits for Transaction B # (should not wait!) Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered extents: __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 btrfs_commit_transaction+0xbf7/0xda0 [btrfs] btrfs_sync_file+0x342/0x4d0 [btrfs] __x64_sys_fdatasync+0x4b/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Task kworker in wait_current_trans waiting for transaction commit: Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs] __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 wait_current_trans+0xb0/0x110 [btrfs] start_transaction+0x346/0x5b0 [btrfs] btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs] btrfs_work_helper+0xe8/0x350 [btrfs] process_one_work+0x1d3/0x3c0 worker_thread+0x4d/0x3e0 kthread+0x12d/0x150 ret_from_fork+0x1f/0x30 Fix this by passing the transaction type to wait_current_trans() and checking btrfs_blocked_trans_types[cur_trans->state] against the given type before deciding to wait. This ensures that transaction types which are allowed to join during certain blocked states will not unnecessarily wait and cause deadlocks. Reviewed-by: Filipe Manana Signed-off-by: Robbie Ko Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/transaction.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 05ee4391c83a..bd03f465e2d3 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -520,13 +520,14 @@ static inline int is_transaction_blocked(struct btrfs_transaction *trans) * when this is done, it is safe to start a new transaction, but the current * transaction might not be fully on disk. */ -static void wait_current_trans(struct btrfs_fs_info *fs_info) +static void wait_current_trans(struct btrfs_fs_info *fs_info, unsigned int type) { struct btrfs_transaction *cur_trans; spin_lock(&fs_info->trans_lock); cur_trans = fs_info->running_transaction; - if (cur_trans && is_transaction_blocked(cur_trans)) { + if (cur_trans && is_transaction_blocked(cur_trans) && + (btrfs_blocked_trans_types[cur_trans->state] & type)) { refcount_inc(&cur_trans->use_count); spin_unlock(&fs_info->trans_lock); @@ -701,12 +702,12 @@ again: sb_start_intwrite(fs_info->sb); if (may_wait_transaction(fs_info, type)) - wait_current_trans(fs_info); + wait_current_trans(fs_info, type); do { ret = join_transaction(fs_info, type); if (ret == -EBUSY) { - wait_current_trans(fs_info); + wait_current_trans(fs_info, type); if (unlikely(type == TRANS_ATTACH || type == TRANS_JOIN_NOSTART)) ret = -ENOENT; @@ -1003,7 +1004,7 @@ out: void btrfs_throttle(struct btrfs_fs_info *fs_info) { - wait_current_trans(fs_info); + wait_current_trans(fs_info, TRANS_START); } bool btrfs_should_end_transaction(struct btrfs_trans_handle *trans) From e9e3b22ddfa760762b696ac6417c8d6edd182e49 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Thu, 11 Dec 2025 12:45:17 +1030 Subject: [PATCH 019/283] btrfs: fix beyond-EOF write handling [BUG] For the following write sequence with 64K page size and 4K fs block size, it will lead to file extent items to be inserted without any data checksum: mkfs.btrfs -s 4k -f $dev > /dev/null mount $dev $mnt xfs_io -f -c "pwrite 0 16k" -c "pwrite 32k 4k" -c pwrite "60k 64K" \ -c "truncate 16k" $mnt/foobar umount $mnt This will result the following 2 file extent items to be inserted (extra trace point added to insert_ordered_extent_file_extent()): btrfs_finish_one_ordered: root=5 ino=257 file_off=61440 num_bytes=4096 csum_bytes=0 btrfs_finish_one_ordered: root=5 ino=257 file_off=0 num_bytes=16384 csum_bytes=16384 Note for file offset 60K, we're inserting a file extent without any data checksum. Also note that range [32K, 36K) didn't reach insert_ordered_extent_file_extent(), which is the correct behavior as that OE is fully truncated, should not result any file extent. Although file extent at 60K will be later dropped by btrfs_truncate(), if the transaction got committed after file extent inserted but before the file extent dropping, we will have a small window where we have a file extent beyond EOF and without any data checksum. That will cause "btrfs check" to report error. [CAUSE] The sequence happens like this: - Buffered write dirtied the page cache and updated isize Now the inode size is 64K, with the following page cache layout: 0 16K 32K 48K 64K |/////////////| |//| |//| - Truncate the inode to 16K Which will trigger writeback through: btrfs_setsize() |- truncate_setsize() | Now the inode size is set to 16K | |- btrfs_truncate() |- btrfs_wait_ordered_range() for [16K, u64(-1)] |- btrfs_fdatawrite_range() for [16K, u64(-1)} |- extent_writepage() for folio 0 |- writepage_delalloc() | Generated OE for [0, 16K), [32K, 36K] and [60K, 64K) | |- extent_writepage_io() Then inside extent_writepage_io(), the dirty fs blocks are handled differently: - Submit write for range [0, 16K) As they are still inside the inode size (16K). - Mark OE [32K, 36K) as truncated Since we only call btrfs_lookup_first_ordered_range() once, which returned the first OE after file offset 16K. - Mark all OEs inside range [16K, 64K) as finished Which will mark OE ranges [32K, 36K) and [60K, 64K) as finished. For OE [32K, 36K) since it's already marked as truncated, and its truncated length is 0, no file extent will be inserted. For OE [60K, 64K) it has never been submitted thus has no data checksum, and we insert the file extent as usual. This is the root cause of file extent at 60K to be inserted without any data checksum. - Clear dirty flags for range [16K, 64K) It is the function btrfs_folio_clear_dirty() which searches and clears any dirty blocks inside that range. [FIX] The bug itself was introduced a long time ago, way before subpage and large folio support. At that time, fs block size must match page size, thus the range [cur, end) is just one fs block. But later with subpage and large folios, the same range [cur, end) can have multiple blocks and ordered extents. Later commit 18de34daa7c6 ("btrfs: truncate ordered extent when skipping writeback past i_size") was fixing a bug related to subpage/large folios, but it's still utilizing the old range [cur, end), meaning only the first OE will be marked as truncated. The proper fix here is to make EOF handling block-by-block, not trying to handle the whole range to @end. By this we always locate and truncate the OE for every dirty block. CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 2d32dfc34ae3..97748d0d54d9 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1728,7 +1728,7 @@ static noinline_for_stack int extent_writepage_io(struct btrfs_inode *inode, struct btrfs_ordered_extent *ordered; ordered = btrfs_lookup_first_ordered_range(inode, cur, - folio_end - cur); + fs_info->sectorsize); /* * We have just run delalloc before getting here, so * there must be an ordered extent. @@ -1742,7 +1742,7 @@ static noinline_for_stack int extent_writepage_io(struct btrfs_inode *inode, btrfs_put_ordered_extent(ordered); btrfs_mark_ordered_io_finished(inode, folio, cur, - end - cur, true); + fs_info->sectorsize, true); /* * This range is beyond i_size, thus we don't need to * bother writing back. @@ -1751,8 +1751,8 @@ static noinline_for_stack int extent_writepage_io(struct btrfs_inode *inode, * writeback the sectors with subpage dirty bits, * causing writeback without ordered extent. */ - btrfs_folio_clear_dirty(fs_info, folio, cur, end - cur); - break; + btrfs_folio_clear_dirty(fs_info, folio, cur, fs_info->sectorsize); + continue; } ret = submit_one_sector(inode, folio, cur, bio_ctrl, i_size); if (unlikely(ret < 0)) { From 7ba0b6461bc4edb3005ea6e00cdae189bcf908a5 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Thu, 11 Dec 2025 15:06:26 +0000 Subject: [PATCH 020/283] btrfs: always detect conflicting inodes when logging inode refs After rename exchanging (either with the rename exchange operation or regular renames in multiple non-atomic steps) two inodes and at least one of them is a directory, we can end up with a log tree that contains only of the inodes and after a power failure that can result in an attempt to delete the other inode when it should not because it was not deleted before the power failure. In some case that delete attempt fails when the target inode is a directory that contains a subvolume inside it, since the log replay code is not prepared to deal with directory entries that point to root items (only inode items). 1) We have directories "dir1" (inode A) and "dir2" (inode B) under the same parent directory; 2) We have a file (inode C) under directory "dir1" (inode A); 3) We have a subvolume inside directory "dir2" (inode B); 4) All these inodes were persisted in a past transaction and we are currently at transaction N; 5) We rename the file (inode C), so at btrfs_log_new_name() we update inode C's last_unlink_trans to N; 6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B), so after the exchange "dir1" is inode B and "dir2" is inode A. During the rename exchange we call btrfs_log_new_name() for inodes A and B, but because they are directories, we don't update their last_unlink_trans to N; 7) An fsync against the file (inode C) is done, and because its inode has a last_unlink_trans with a value of N we log its parent directory (inode A) (through btrfs_log_all_parents(), called from btrfs_log_inode_parent()). 8) So we end up with inode B not logged, which now has the old name of inode A. At copy_inode_items_to_log(), when logging inode A, we did not check if we had any conflicting inode to log because inode A has a generation lower than the current transaction (created in a past transaction); 9) After a power failure, when replaying the log tree, since we find that inode A has a new name that conflicts with the name of inode B in the fs tree, we attempt to delete inode B... this is wrong since that directory was never deleted before the power failure, and because there is a subvolume inside that directory, attempting to delete it will fail since replay_dir_deletes() and btrfs_unlink_inode() are not prepared to deal with dir items that point to roots instead of inodes. When that happens the mount fails and we get a stack trace like the following: [87.2314] BTRFS info (device dm-0): start tree-log replay [87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259 [87.2332] ------------[ cut here ]------------ [87.2338] BTRFS: Transaction aborted (error -2) [87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2368] Modules linked in: btrfs loop dm_thin_pool (...) [87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full) [87.2489] Tainted: [W]=WARN [87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs] [87.2538] Code: c0 89 04 24 (...) [87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286 [87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000 [87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff [87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840 [87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0 [87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10 [87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000 [87.2629] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [87.2637] CR2: 00007ffc9ec33b98 CR3: 000000011273e003 CR4: 0000000000370ef0 [87.2648] Call Trace: [87.2651] [87.2654] btrfs_unlink_inode+0x15/0x40 [btrfs] [87.2661] unlink_inode_for_log_replay+0x27/0xf0 [btrfs] [87.2669] check_item_in_log+0x1ea/0x2c0 [btrfs] [87.2676] replay_dir_deletes+0x16b/0x380 [btrfs] [87.2684] fixup_inode_link_count+0x34b/0x370 [btrfs] [87.2696] fixup_inode_link_counts+0x41/0x160 [btrfs] [87.2703] btrfs_recover_log_trees+0x1ff/0x7c0 [btrfs] [87.2711] ? __pfx_replay_one_buffer+0x10/0x10 [btrfs] [87.2719] open_ctree+0x10bb/0x15f0 [btrfs] [87.2726] btrfs_get_tree.cold+0xb/0x16c [btrfs] [87.2734] ? fscontext_read+0x15c/0x180 [87.2740] ? rw_verify_area+0x50/0x180 [87.2746] vfs_get_tree+0x25/0xd0 [87.2750] vfs_cmd_create+0x59/0xe0 [87.2755] __do_sys_fsconfig+0x4f6/0x6b0 [87.2760] do_syscall_64+0x50/0x1220 [87.2764] entry_SYSCALL_64_after_hwframe+0x76/0x7e [87.2770] RIP: 0033:0x7f7b9625f4aa [87.2775] Code: 73 01 c3 48 (...) [87.2803] RSP: 002b:00007ffc9ec35b08 EFLAGS: 00000246 ORIG_RAX: 00000000000001af [87.2817] RAX: ffffffffffffffda RBX: 0000558bfa91ac20 RCX: 00007f7b9625f4aa [87.2829] RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003 [87.2842] RBP: 0000558bfa91b120 R08: 0000000000000000 R09: 0000000000000000 [87.2854] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [87.2864] R13: 00007f7b963f1580 R14: 00007f7b963f326c R15: 00007f7b963d8a23 [87.2877] [87.2882] ---[ end trace 0000000000000000 ]--- [87.2891] BTRFS: error (device dm-0 state A) in __btrfs_unlink_inode:4345: errno=-2 No such entry [87.2904] BTRFS: error (device dm-0 state EAO) in do_abort_log_replay:191: errno=-2 No such entry [87.2915] BTRFS critical (device dm-0 state EAO): log tree (for root 5) leaf currently being processed (slot 7 key (258 12 257)): [87.2929] BTRFS info (device dm-0 state EAO): leaf 30736384 gen 10 total ptrs 7 free space 15712 owner 18446744073709551610 [87.2929] BTRFS info (device dm-0 state EAO): refs 3 lock_owner 0 current 638968 [87.2929] item 0 key (257 INODE_ITEM 0) itemoff 16123 itemsize 160 [87.2929] inode generation 9 transid 10 size 0 nbytes 0 [87.2929] block group 0 mode 40755 links 1 uid 0 gid 0 [87.2929] rdev 0 sequence 7 flags 0x0 [87.2929] atime 1765464494.678070921 [87.2929] ctime 1765464494.686606513 [87.2929] mtime 1765464494.686606513 [87.2929] otime 1765464494.678070921 [87.2929] item 1 key (257 INODE_REF 256) itemoff 16109 itemsize 14 [87.2929] index 4 name_len 4 [87.2929] item 2 key (257 DIR_LOG_INDEX 2) itemoff 16101 itemsize 8 [87.2929] dir log end 2 [87.2929] item 3 key (257 DIR_LOG_INDEX 3) itemoff 16093 itemsize 8 [87.2929] dir log end 18446744073709551615 [87.2930] item 4 key (257 DIR_INDEX 3) itemoff 16060 itemsize 33 [87.2930] location key (258 1 0) type 1 [87.2930] transid 10 data_len 0 name_len 3 [87.2930] item 5 key (258 INODE_ITEM 0) itemoff 15900 itemsize 160 [87.2930] inode generation 9 transid 10 size 0 nbytes 0 [87.2930] block group 0 mode 100644 links 1 uid 0 gid 0 [87.2930] rdev 0 sequence 2 flags 0x0 [87.2930] atime 1765464494.678456467 [87.2930] ctime 1765464494.686606513 [87.2930] mtime 1765464494.678456467 [87.2930] otime 1765464494.678456467 [87.2930] item 6 key (258 INODE_REF 257) itemoff 15887 itemsize 13 [87.2930] index 3 name_len 3 [87.2930] BTRFS critical (device dm-0 state EAO): log replay failed in unlink_inode_for_log_replay:1045 for root 5, stage 3, with error -2: failed to unlink inode 256 parent dir 259 name subvol root 5 [87.2963] BTRFS: error (device dm-0 state EAO) in btrfs_recover_log_trees:7743: errno=-2 No such entry [87.2981] BTRFS: error (device dm-0 state EAO) in btrfs_replay_log:2083: errno=-2 No such entry (Failed to recover log tr So fix this by changing copy_inode_items_to_log() to always detect if there are conflicting inodes for the ref/extref of the inode being logged even if the inode was created in a past transaction. A test case for fstests will follow soon. CC: stable@vger.kernel.org # 6.1+ Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/tree-log.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 31edc93a383e..5831754bb01c 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -6341,10 +6341,8 @@ again: * and no keys greater than that, so bail out. */ break; - } else if ((min_key->type == BTRFS_INODE_REF_KEY || - min_key->type == BTRFS_INODE_EXTREF_KEY) && - (inode->generation == trans->transid || - ctx->logging_conflict_inodes)) { + } else if (min_key->type == BTRFS_INODE_REF_KEY || + min_key->type == BTRFS_INODE_EXTREF_KEY) { u64 other_ino = 0; u64 other_parent = 0; From 83f59076a1ae6f5c6845d6f7ed3a1a373d883684 Mon Sep 17 00:00:00 2001 From: Leo Martins Date: Fri, 12 Dec 2025 17:26:26 -0800 Subject: [PATCH 021/283] btrfs: fix use-after-free warning in btrfs_get_or_create_delayed_node() Previously, btrfs_get_or_create_delayed_node() set the delayed_node's refcount before acquiring the root->delayed_nodes lock. Commit e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes") moved refcount_set inside the critical section, which means there is no longer a memory barrier between setting the refcount and setting btrfs_inode->delayed_node. Without that barrier, the stores to node->refs and btrfs_inode->delayed_node may become visible out of order. Another thread can then read btrfs_inode->delayed_node and attempt to increment a refcount that hasn't been set yet, leading to a refcounting bug and a use-after-free warning. The fix is to move refcount_set back to where it was to take advantage of the implicit memory barrier provided by lock acquisition. Because the allocations now happen outside of the lock's critical section, they can use GFP_NOFS instead of GFP_ATOMIC. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202511262228.6dda231e-lkp@intel.com Fixes: e8513c012de7 ("btrfs: implement ref_tracker for delayed_nodes") Tested-by: kernel test robot Reviewed-by: Filipe Manana Signed-off-by: Leo Martins Signed-off-by: David Sterba --- fs/btrfs/delayed-inode.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index ce6e9f8812e0..4b7d9015e0da 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -152,37 +152,39 @@ again: return ERR_PTR(-ENOMEM); btrfs_init_delayed_node(node, root, ino); + /* Cached in the inode and can be accessed. */ + refcount_set(&node->refs, 2); + btrfs_delayed_node_ref_tracker_alloc(node, tracker, GFP_NOFS); + btrfs_delayed_node_ref_tracker_alloc(node, &node->inode_cache_tracker, GFP_NOFS); + /* Allocate and reserve the slot, from now it can return a NULL from xa_load(). */ ret = xa_reserve(&root->delayed_nodes, ino, GFP_NOFS); - if (ret == -ENOMEM) { - btrfs_delayed_node_ref_tracker_dir_exit(node); - kmem_cache_free(delayed_node_cache, node); - return ERR_PTR(-ENOMEM); - } + if (ret == -ENOMEM) + goto cleanup; + xa_lock(&root->delayed_nodes); ptr = xa_load(&root->delayed_nodes, ino); if (ptr) { /* Somebody inserted it, go back and read it. */ xa_unlock(&root->delayed_nodes); - btrfs_delayed_node_ref_tracker_dir_exit(node); - kmem_cache_free(delayed_node_cache, node); - node = NULL; - goto again; + goto cleanup; } ptr = __xa_store(&root->delayed_nodes, ino, node, GFP_ATOMIC); ASSERT(xa_err(ptr) != -EINVAL); ASSERT(xa_err(ptr) != -ENOMEM); ASSERT(ptr == NULL); - - /* Cached in the inode and can be accessed. */ - refcount_set(&node->refs, 2); - btrfs_delayed_node_ref_tracker_alloc(node, tracker, GFP_ATOMIC); - btrfs_delayed_node_ref_tracker_alloc(node, &node->inode_cache_tracker, GFP_ATOMIC); - btrfs_inode->delayed_node = node; xa_unlock(&root->delayed_nodes); return node; +cleanup: + btrfs_delayed_node_ref_tracker_free(node, tracker); + btrfs_delayed_node_ref_tracker_free(node, &node->inode_cache_tracker); + btrfs_delayed_node_ref_tracker_dir_exit(node); + kmem_cache_free(delayed_node_cache, node); + if (ret) + return ERR_PTR(ret); + goto again; } /* From f8da41de0bff9eb1d774a7253da0c9f637c4470a Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 12 Dec 2025 17:10:10 +0000 Subject: [PATCH 022/283] btrfs: do not free data reservation in fallback from inline due to -ENOSPC If we fail to create an inline extent due to -ENOSPC, we will attempt to go through the normal COW path, reserve an extent, create an ordered extent, etc. However we were always freeing the reserved qgroup data, which is wrong since we will use data. Fix this by freeing the reserved qgroup data in __cow_file_range_inline() only if we are not doing the fallback (ret is <= 0). Reviewed-by: Qu Wenruo Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6633b3dc9314..c4c370b6aae9 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -673,8 +673,12 @@ out: * it won't count as data extent, free them directly here. * And at reserve time, it's always aligned to page size, so * just free one page here. + * + * If we fallback to non-inline (ret == 1) due to -ENOSPC, then we need + * to keep the data reservation. */ - btrfs_qgroup_free_data(inode, NULL, 0, fs_info->sectorsize, NULL); + if (ret <= 0) + btrfs_qgroup_free_data(inode, NULL, 0, fs_info->sectorsize, NULL); btrfs_free_path(path); btrfs_end_transaction(trans); return ret; From c1c050f92d8f6aac4e17f7f2230160794fceef0c Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Fri, 12 Dec 2025 17:18:25 +0000 Subject: [PATCH 023/283] btrfs: fix reservation leak in some error paths when inserting inline extent If we fail to allocate a path or join a transaction, we return from __cow_file_range_inline() without freeing the reserved qgroup data, resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data() in such cases. Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c4c370b6aae9..03337fa7a61c 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -617,19 +617,22 @@ static noinline int __cow_file_range_inline(struct btrfs_inode *inode, struct btrfs_drop_extents_args drop_args = { 0 }; struct btrfs_root *root = inode->root; struct btrfs_fs_info *fs_info = root->fs_info; - struct btrfs_trans_handle *trans; + struct btrfs_trans_handle *trans = NULL; u64 data_len = (compressed_size ?: size); int ret; struct btrfs_path *path; path = btrfs_alloc_path(); - if (!path) - return -ENOMEM; + if (!path) { + ret = -ENOMEM; + goto out; + } trans = btrfs_join_transaction(root); if (IS_ERR(trans)) { - btrfs_free_path(path); - return PTR_ERR(trans); + ret = PTR_ERR(trans); + trans = NULL; + goto out; } trans->block_rsv = &inode->block_rsv; @@ -680,7 +683,8 @@ out: if (ret <= 0) btrfs_qgroup_free_data(inode, NULL, 0, fs_info->sectorsize, NULL); btrfs_free_path(path); - btrfs_end_transaction(trans); + if (trans) + btrfs_end_transaction(trans); return ret; } From a05543d6b05ba998fdbb4b383319ae5121bb7407 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 10 Dec 2025 06:50:26 +0100 Subject: [PATCH 024/283] gpio: it87: balance superio enter/exit calls in error path We always call superio_enter() in it87_gpio_direction_out() but only call superio_exit() if the call to it87_gpio_set() succeeds. Move the label to balance the calls in error path as well. Fixes: ef877a159072 ("gpio: it87: use new line value setter callbacks") Reported-by: Daniel Gibson Closes: https://lore.kernel.org/all/bd0a00e3-9b8c-43e8-8772-e67b91f4c71e@gibson.sh/ Link: https://lore.kernel.org/r/20251210055026.23146-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-it87.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/gpio/gpio-it87.c b/drivers/gpio/gpio-it87.c index 5d677bcfccf2..2ad3c239367b 100644 --- a/drivers/gpio/gpio-it87.c +++ b/drivers/gpio/gpio-it87.c @@ -12,6 +12,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include @@ -241,23 +242,17 @@ static int it87_gpio_direction_out(struct gpio_chip *chip, mask = 1 << (gpio_num % 8); group = (gpio_num / 8); - spin_lock(&it87_gpio->lock); + guard(spinlock)(&it87_gpio->lock); rc = superio_enter(); if (rc) - goto exit; + return rc; /* set the output enable bit */ superio_set_mask(mask, group + it87_gpio->output_base); rc = it87_gpio_set(chip, gpio_num, val); - if (rc) - goto exit; - superio_exit(); - -exit: - spin_unlock(&it87_gpio->lock); return rc; } From f28beb69c51517aec7067dfb2074e7c751542384 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Mon, 15 Dec 2025 12:57:21 +0100 Subject: [PATCH 025/283] HID: usbhid: paper over wrong bNumDescriptor field Some faulty devices (ZWO EFWmini) have a wrong optional HID class descriptor count compared to the provided length. Given that we plainly ignore those optional descriptor, we can attempt to fix the provided number so we do not lock out those devices. Signed-off-by: Benjamin Tissoires --- drivers/hid/usbhid/hid-core.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index aac0051a2cf6..758eb21430cd 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -985,6 +985,7 @@ static int usbhid_parse(struct hid_device *hid) struct usb_device *dev = interface_to_usbdev (intf); struct hid_descriptor *hdesc; struct hid_class_descriptor *hcdesc; + __u8 fixed_opt_descriptors_size; u32 quirks = 0; unsigned int rsize = 0; char *rdesc; @@ -1015,7 +1016,21 @@ static int usbhid_parse(struct hid_device *hid) (hdesc->bNumDescriptors - 1) * sizeof(*hcdesc)) { dbg_hid("hid descriptor invalid, bLen=%hhu bNum=%hhu\n", hdesc->bLength, hdesc->bNumDescriptors); - return -EINVAL; + + /* + * Some devices may expose a wrong number of descriptors compared + * to the provided length. + * However, we ignore the optional hid class descriptors entirely + * so we can safely recompute the proper field. + */ + if (hdesc->bLength >= sizeof(*hdesc)) { + fixed_opt_descriptors_size = hdesc->bLength - sizeof(*hdesc); + + hid_warn(intf, "fixing wrong optional hid class descriptors count\n"); + hdesc->bNumDescriptors = fixed_opt_descriptors_size / sizeof(*hcdesc) + 1; + } else { + return -EINVAL; + } } hid->version = le16_to_cpu(hdesc->bcdHID); From e9143268d259d98e111a649affa061acb8e13c5b Mon Sep 17 00:00:00 2001 From: Siarhei Vishniakou Date: Tue, 11 Nov 2025 15:45:19 -0800 Subject: [PATCH 026/283] HID: playstation: Center initial joystick axes to prevent spurious events When a new PlayStation gamepad (DualShock 4 or DualSense) is initialized, the input subsystem sets the default value for its absolute axes (e.g., ABS_X, ABS_Y) to 0. However, the hardware's actual neutral/resting state for these joysticks is 128 (0x80). This creates a mismatch. When the first HID report arrives from the device, the driver sees the resting value of 128. The kernel compares this to its initial state of 0 and incorrectly interprets this as a delta (0 -> 128). Consequently, it generates EV_ABS events for this initial, non-existent movement. This behavior can fail userspace 'sanity check' tests (e.g., in Android CTS) that correctly assert no motion events should be generated from a device that is already at rest. This patch fixes the issue by explicitly setting the initial value of the main joystick axes (e.g., ABS_X, ABS_Y, ABS_RX, ABS_RY) to 128 (0x80) in the common ps_gamepad_create() function. This aligns the kernel's initial state with the hardware's expected neutral state, ensuring that the first report (at 128) produces no delta and thus, no spurious event. Signed-off-by: Siarhei Vishniakou Reviewed-by: Benjamin Tissoires Signed-off-by: Benjamin Tissoires --- drivers/hid/hid-playstation.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hid/hid-playstation.c b/drivers/hid/hid-playstation.c index 128aa6abd10b..e4dfcf26b04e 100644 --- a/drivers/hid/hid-playstation.c +++ b/drivers/hid/hid-playstation.c @@ -753,11 +753,16 @@ ps_gamepad_create(struct hid_device *hdev, if (IS_ERR(gamepad)) return ERR_CAST(gamepad); + /* Set initial resting state for joysticks to 128 (center) */ input_set_abs_params(gamepad, ABS_X, 0, 255, 0, 0); + gamepad->absinfo[ABS_X].value = 128; input_set_abs_params(gamepad, ABS_Y, 0, 255, 0, 0); + gamepad->absinfo[ABS_Y].value = 128; input_set_abs_params(gamepad, ABS_Z, 0, 255, 0, 0); input_set_abs_params(gamepad, ABS_RX, 0, 255, 0, 0); + gamepad->absinfo[ABS_RX].value = 128; input_set_abs_params(gamepad, ABS_RY, 0, 255, 0, 0); + gamepad->absinfo[ABS_RY].value = 128; input_set_abs_params(gamepad, ABS_RZ, 0, 255, 0, 0); input_set_abs_params(gamepad, ABS_HAT0X, -1, 1, 0, 0); From 0e13150c1a13a3a3d6184c24bfd080d5999945d1 Mon Sep 17 00:00:00 2001 From: Thomas Fourier Date: Wed, 3 Dec 2025 17:56:35 +0100 Subject: [PATCH 027/283] HID: Intel-thc-hid: Intel-thc: fix dma_unmap_sg() nents value The `dma_unmap_sg()` functions should be called with the same nents as the `dma_map_sg()`, not the value the map function returned. Save the number of entries in struct thc_dma_configuration. Fixes: a688404b2e20 ("HID: intel-thc-hid: intel-thc: Add THC DMA interfaces") Signed-off-by: Thomas Fourier Reviewed-by: Even Xu Reviewed-by: Andy Shevchenko Signed-off-by: Benjamin Tissoires --- drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.c | 4 +++- drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.h | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.c b/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.c index 82b8854843e0..a0c368aa7979 100644 --- a/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.c +++ b/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.c @@ -232,6 +232,7 @@ static int setup_dma_buffers(struct thc_device *dev, return 0; memset(config->sgls, 0, sizeof(config->sgls)); + memset(config->sgls_nent_pages, 0, sizeof(config->sgls_nent_pages)); memset(config->sgls_nent, 0, sizeof(config->sgls_nent)); cpu_addr = dma_alloc_coherent(dev->dev, prd_tbls_size, @@ -254,6 +255,7 @@ static int setup_dma_buffers(struct thc_device *dev, } count = dma_map_sg(dev->dev, config->sgls[i], nent, dir); + config->sgls_nent_pages[i] = nent; config->sgls_nent[i] = count; } @@ -299,7 +301,7 @@ static void release_dma_buffers(struct thc_device *dev, continue; dma_unmap_sg(dev->dev, config->sgls[i], - config->sgls_nent[i], + config->sgls_nent_pages[i], config->dir); sgl_free(config->sgls[i]); diff --git a/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.h b/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.h index 78917400492c..541d33995baf 100644 --- a/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.h +++ b/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.h @@ -91,6 +91,7 @@ struct thc_prd_table { * @dir: Direction of DMA for this config * @prd_tbls: PRD tables for current DMA * @sgls: Array of pointers to scatter-gather lists + * @sgls_nent_pages: Number of pages per scatter-gather list * @sgls_nent: Actual number of entries per scatter-gather list * @prd_tbl_num: Actual number of PRD tables * @max_packet_size: Size of the buffer needed for 1 DMA message (1 PRD table) @@ -107,6 +108,7 @@ struct thc_dma_configuration { struct thc_prd_table *prd_tbls; struct scatterlist *sgls[PRD_TABLES_NUM]; + u8 sgls_nent_pages[PRD_TABLES_NUM]; u8 sgls_nent[PRD_TABLES_NUM]; u8 prd_tbl_num; From daeed86b686855adda79f13729e0c9b0530990be Mon Sep 17 00:00:00 2001 From: Zhang Lixu Date: Wed, 10 Dec 2025 10:53:28 +0800 Subject: [PATCH 028/283] HID: intel-ish-hid: Update ishtp bus match to support device ID table The ishtp_cl_bus_match() function previously only checked the first entry in the driver's device ID table. Update it to iterate over the entire table, allowing proper matching for drivers with multiple supported protocol GUIDs. Signed-off-by: Zhang Lixu Acked-by: Srinivas Pandruvada Signed-off-by: Benjamin Tissoires --- drivers/hid/intel-ish-hid/ishtp/bus.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ishtp/bus.c b/drivers/hid/intel-ish-hid/ishtp/bus.c index c6ce37244e49..c3915f3a060e 100644 --- a/drivers/hid/intel-ish-hid/ishtp/bus.c +++ b/drivers/hid/intel-ish-hid/ishtp/bus.c @@ -240,9 +240,17 @@ static int ishtp_cl_bus_match(struct device *dev, const struct device_driver *dr { struct ishtp_cl_device *device = to_ishtp_cl_device(dev); struct ishtp_cl_driver *driver = to_ishtp_cl_driver(drv); + struct ishtp_fw_client *client = device->fw_client; + const struct ishtp_device_id *id; - return(device->fw_client ? guid_equal(&driver->id[0].guid, - &device->fw_client->props.protocol_name) : 0); + if (client) { + for (id = driver->id; !guid_is_null(&id->guid); id++) { + if (guid_equal(&id->guid, &client->props.protocol_name)) + return 1; + } + } + + return 0; } /** From 56e230723e3a818373bd62331bccb1c6d2b3881b Mon Sep 17 00:00:00 2001 From: Zhang Lixu Date: Fri, 12 Dec 2025 10:51:50 +0800 Subject: [PATCH 029/283] HID: intel-ish-hid: Reset enum_devices_done before enumeration Some systems have enabled ISH without any sensors. In this case sending HOSTIF_DM_ENUM_DEVICES results in 0 sensors. This triggers ISH hardware reset on subsequent enumeration after S3/S4 resume. The enum_devices_done flag was not reset before sending the HOSTIF_DM_ENUM_DEVICES command. On subsequent enumeration calls (such as after S3/S4 resume), this flag retains its previous true value, causing the wait loop to be skipped and returning prematurely to hid_ishtp_cl_init(). If 0 HID devices are found, hid_ishtp_cl_init() skips getting HID device descriptors and sets init_done to true. When the delayed enumeration response arrives with init_done already true, the driver treats it as a bad packet and triggers an ISH hardware reset. Set enum_devices_done to false before sending the enumeration command, consistent with similar functions like ishtp_get_hid_descriptor() and ishtp_get_report_descriptor() which reset their respective flags. Signed-off-by: Zhang Lixu Acked-by: Srinivas Pandruvada Signed-off-by: Benjamin Tissoires --- drivers/hid/intel-ish-hid/ishtp-hid-client.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/intel-ish-hid/ishtp-hid-client.c b/drivers/hid/intel-ish-hid/ishtp-hid-client.c index f37b3bc2bb7d..6d64008f2ce0 100644 --- a/drivers/hid/intel-ish-hid/ishtp-hid-client.c +++ b/drivers/hid/intel-ish-hid/ishtp-hid-client.c @@ -495,6 +495,7 @@ static int ishtp_enum_enum_devices(struct ishtp_cl *hid_ishtp_cl) int rv; /* Send HOSTIF_DM_ENUM_DEVICES */ + client_data->enum_devices_done = false; memset(&msg, 0, sizeof(struct hostif_msg)); msg.hdr.command = HOSTIF_DM_ENUM_DEVICES; rv = ishtp_cl_send(hid_ishtp_cl, (unsigned char *)&msg, From ff3f234ff1dcd6d626a989151db067a1b7f0f215 Mon Sep 17 00:00:00 2001 From: DaytonCL Date: Sun, 14 Dec 2025 14:34:36 +0100 Subject: [PATCH 030/283] HID: multitouch: add MT_QUIRK_STICKY_FINGERS to MT_CLS_VTL Some VTL-class touchpads (e.g. TOPS0102:00 35CC:0104) intermittently fail to release a finger contact. A previous slot remains logically active, accompanied by stale BTN_TOOL_DOUBLETAP state, causing gestures to stay latched and resulting in stuck two-finger scrolling and false right-clicks. Apply MT_QUIRK_STICKY_FINGERS to handle the unreleased contact correctly. Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1225 Suggested-by: Benjamin Tissoires Tested-by: DaytonCL Signed-off-by: DaytonCL Signed-off-by: Benjamin Tissoires --- drivers/hid/hid-multitouch.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 179dc316b4b5..a0c1ad5acb67 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -393,6 +393,7 @@ static const struct mt_class mt_classes[] = { { .name = MT_CLS_VTL, .quirks = MT_QUIRK_ALWAYS_VALID | MT_QUIRK_CONTACT_CNT_ACCURATE | + MT_QUIRK_STICKY_FINGERS | MT_QUIRK_FORCE_GET_FEATURE, }, { .name = MT_CLS_GOOGLE, From f39006965dd37e7be823dba6ca484adccc7a4dff Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 19 Dec 2025 09:14:38 +0800 Subject: [PATCH 031/283] HID: Intel-thc-hid: Intel-thc: Fix wrong register reading Correct the read register for the setting of max input size and interrupt delay. Fixes: 22da60f0304b ("HID: Intel-thc-hid: Intel-thc: Introduce interrupt delay control") Fixes: 45e92a093099 ("HID: Intel-thc-hid: Intel-thc: Introduce max input size control") Signed-off-by: Even Xu Signed-off-by: Benjamin Tissoires --- drivers/hid/intel-thc-hid/intel-thc/intel-thc-dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dev.c b/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dev.c index 636a68306501..7e220a4c5ded 100644 --- a/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dev.c +++ b/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dev.c @@ -1593,7 +1593,7 @@ int thc_i2c_set_rx_max_size(struct thc_device *dev, u32 max_rx_size) if (!max_rx_size) return -EOPNOTSUPP; - ret = regmap_read(dev->thc_regmap, THC_M_PRT_SW_SEQ_STS_OFFSET, &val); + ret = regmap_read(dev->thc_regmap, THC_M_PRT_SPI_ICRRD_OPCODE_OFFSET, &val); if (ret) return ret; @@ -1662,7 +1662,7 @@ int thc_i2c_set_rx_int_delay(struct thc_device *dev, u32 delay_us) if (!delay_us) return -EOPNOTSUPP; - ret = regmap_read(dev->thc_regmap, THC_M_PRT_SW_SEQ_STS_OFFSET, &val); + ret = regmap_read(dev->thc_regmap, THC_M_PRT_SPI_ICRRD_OPCODE_OFFSET, &val); if (ret) return ret; From c6d0cdf7e572c64bd72699d10b28bfddaf758a0f Mon Sep 17 00:00:00 2001 From: Andrea della Porta Date: Thu, 18 Dec 2025 20:09:06 +0100 Subject: [PATCH 032/283] dt-bindings: misc: pci1de4,1: add required reg property for endpoint The PCI subsystem links an endpoint Device Tree node to its corresponding pci_dev structure only if the Bus/Device/Function (BDF) encoded in the 'reg' property matches the actual hardware topology. Add the 'reg' property and mark it as required to ensure proper binding between the device_node and the pci_dev. Update the example to reflect this requirement. Signed-off-by: Andrea della Porta Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/b58bfcd957b2270fcf932d463f2db534b2ae1a6d.1766077285.git.andrea.porta@suse.com Signed-off-by: Florian Fainelli --- Documentation/devicetree/bindings/misc/pci1de4,1.yaml | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml index 2f9a7a554ed8..17a8c19af8cc 100644 --- a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml +++ b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml @@ -25,6 +25,10 @@ properties: items: - const: pci1de4,1 + reg: + maxItems: 1 + description: The PCI Bus-Device-Function address. + '#interrupt-cells': const: 2 description: | @@ -101,6 +105,7 @@ unevaluatedProperties: false required: - compatible + - reg - '#interrupt-cells' - interrupt-controller - pci-ep-bus@1 @@ -111,8 +116,9 @@ examples: #address-cells = <3>; #size-cells = <2>; - rp1@0,0 { + dev@0,0 { compatible = "pci1de4,1"; + reg = <0x10000 0x0 0x0 0x0 0x0>; ranges = <0x01 0x00 0x00000000 0x82010000 0x00 0x00 0x00 0x400000>; #address-cells = <3>; #size-cells = <2>; From ce26f588c8310e0fdd1bc7524a86fdf0ef6b1c85 Mon Sep 17 00:00:00 2001 From: Andrea della Porta Date: Thu, 18 Dec 2025 20:09:07 +0100 Subject: [PATCH 033/283] misc: rp1: drop overlay support The RP1 driver can load an overlay at runtime to describe the inner peripherals. This has led to a lot of confusion regarding the naming of nodes, their topology and the reclaiming of related node resources. Since the overlay is currently not fully functional, drop its support in the driver in favor of the fully described static DT. This also means that this driver does not depend on CONFIG_PCI_DYNAMIC_OF_NODES and no longer requires PCI quirks to dynamically create the intermediate PCI nodes. Signed-off-by: Andrea della Porta Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/4b0aa7160877cf128b9bc713776bcac73c46eb24.1766077285.git.andrea.porta@suse.com Signed-off-by: Florian Fainelli --- drivers/misc/rp1/Kconfig | 6 +----- drivers/misc/rp1/Makefile | 3 +-- drivers/misc/rp1/rp1-pci.dtso | 25 ----------------------- drivers/misc/rp1/rp1_pci.c | 37 ++++------------------------------- drivers/pci/quirks.c | 1 - 5 files changed, 6 insertions(+), 66 deletions(-) delete mode 100644 drivers/misc/rp1/rp1-pci.dtso diff --git a/drivers/misc/rp1/Kconfig b/drivers/misc/rp1/Kconfig index 5232e70d3079..2c13b3968b01 100644 --- a/drivers/misc/rp1/Kconfig +++ b/drivers/misc/rp1/Kconfig @@ -5,8 +5,7 @@ config MISC_RP1 tristate "RaspberryPi RP1 misc device" - depends on OF_IRQ && OF_OVERLAY && PCI_MSI && PCI_QUIRKS - select PCI_DYNAMIC_OF_NODES + depends on OF_IRQ && PCI_MSI help Support the RP1 peripheral chip found on Raspberry Pi 5 board. @@ -15,6 +14,3 @@ config MISC_RP1 The driver is responsible for enabling the DT node once the PCIe endpoint has been configured, and handling interrupts. - - This driver uses an overlay to load other drivers to support for - RP1 internal sub-devices. diff --git a/drivers/misc/rp1/Makefile b/drivers/misc/rp1/Makefile index 508b4cb05627..ab32b433d7ed 100644 --- a/drivers/misc/rp1/Makefile +++ b/drivers/misc/rp1/Makefile @@ -1,3 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_MISC_RP1) += rp1-pci.o -rp1-pci-objs := rp1_pci.o rp1-pci.dtbo.o +obj-$(CONFIG_MISC_RP1) += rp1_pci.o diff --git a/drivers/misc/rp1/rp1-pci.dtso b/drivers/misc/rp1/rp1-pci.dtso deleted file mode 100644 index eea826b36e02..000000000000 --- a/drivers/misc/rp1/rp1-pci.dtso +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) - -/* - * The dts overlay is included from the dts directory so - * it can be possible to check it with CHECK_DTBS while - * also compile it from the driver source directory. - */ - -/dts-v1/; -/plugin/; - -/ { - fragment@0 { - target-path=""; - __overlay__ { - compatible = "pci1de4,1"; - #address-cells = <3>; - #size-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - - #include "arm64/broadcom/rp1-common.dtsi" - }; - }; -}; diff --git a/drivers/misc/rp1/rp1_pci.c b/drivers/misc/rp1/rp1_pci.c index a342bcc6164b..d210da84c30a 100644 --- a/drivers/misc/rp1/rp1_pci.c +++ b/drivers/misc/rp1/rp1_pci.c @@ -34,16 +34,11 @@ /* Interrupts */ #define RP1_INT_END 61 -/* Embedded dtbo symbols created by cmd_wrap_S_dtb in scripts/Makefile.lib */ -extern char __dtbo_rp1_pci_begin[]; -extern char __dtbo_rp1_pci_end[]; - struct rp1_dev { struct pci_dev *pdev; struct irq_domain *domain; struct irq_data *pcie_irqds[64]; void __iomem *bar1; - int ovcs_id; /* overlay changeset id */ bool level_triggered_irq[RP1_INT_END]; }; @@ -184,24 +179,13 @@ static void rp1_unregister_interrupts(struct pci_dev *pdev) static int rp1_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - u32 dtbo_size = __dtbo_rp1_pci_end - __dtbo_rp1_pci_begin; - void *dtbo_start = __dtbo_rp1_pci_begin; struct device *dev = &pdev->dev; struct device_node *rp1_node; - bool skip_ovl = true; struct rp1_dev *rp1; int err = 0; int i; - /* - * Either use rp1_nexus node if already present in DT, or - * set a flag to load it from overlay at runtime - */ - rp1_node = of_find_node_by_name(NULL, "rp1_nexus"); - if (!rp1_node) { - rp1_node = dev_of_node(dev); - skip_ovl = false; - } + rp1_node = dev_of_node(dev); if (!rp1_node) { dev_err(dev, "Missing of_node for device\n"); @@ -276,42 +260,29 @@ static int rp1_probe(struct pci_dev *pdev, const struct pci_device_id *id) rp1_chained_handle_irq, rp1); } - if (!skip_ovl) { - err = of_overlay_fdt_apply(dtbo_start, dtbo_size, &rp1->ovcs_id, - rp1_node); - if (err) - goto err_unregister_interrupts; - } - err = of_platform_default_populate(rp1_node, NULL, dev); if (err) { dev_err_probe(&pdev->dev, err, "Error populating devicetree\n"); - goto err_unload_overlay; + goto err_unregister_interrupts; } - if (skip_ovl) - of_node_put(rp1_node); + of_node_put(rp1_node); return 0; -err_unload_overlay: - of_overlay_remove(&rp1->ovcs_id); err_unregister_interrupts: rp1_unregister_interrupts(pdev); err_put_node: - if (skip_ovl) - of_node_put(rp1_node); + of_node_put(rp1_node); return err; } static void rp1_remove(struct pci_dev *pdev) { - struct rp1_dev *rp1 = pci_get_drvdata(pdev); struct device *dev = &pdev->dev; of_platform_depopulate(dev); - of_overlay_remove(&rp1->ovcs_id); rp1_unregister_interrupts(pdev); } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index b9c252aa6fe0..280cd50d693b 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -6308,7 +6308,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5020, of_pci_make_dev_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_XILINX, 0x5021, of_pci_make_dev_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REDHAT, 0x0005, of_pci_make_dev_node); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, 0x9660, of_pci_make_dev_node); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RPI, PCI_DEVICE_ID_RPI_RP1_C0, of_pci_make_dev_node); /* * Devices known to require a longer delay before first config space access From bc97e616a70df55dfa893879db7ea65d225f7846 Mon Sep 17 00:00:00 2001 From: Andrea della Porta Date: Thu, 18 Dec 2025 20:09:08 +0100 Subject: [PATCH 034/283] arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology The node describing the RP1 endpoint currently uses a specific name ('rp1_nexus') that does not correctly reflect the PCI topology. Update the DT with the correct topology and use generic node names. Additionally, since the driver dropped overlay support in favor of a fully described DT, rename '...-ovl-rp1.dts' to '...-base.dtsi' for inclusion in the board DTB, as it is no longer compiled as a standalone DTB. Signed-off-by: Andrea della Porta Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/827b12ba48bb47bc77a0f5e5617aea961c8bc6b5.1766077285.git.andrea.porta@suse.com Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/Makefile | 1 - ...-ovl-rp1.dts => bcm2712-rpi-5-b-base.dtsi} | 0 .../boot/dts/broadcom/bcm2712-rpi-5-b.dts | 39 ++++++++++++------- 3 files changed, 26 insertions(+), 14 deletions(-) rename arch/arm64/boot/dts/broadcom/{bcm2712-rpi-5-b-ovl-rp1.dts => bcm2712-rpi-5-b-base.dtsi} (100%) diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index 83d45afc6588..d43901404c95 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -7,7 +7,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2711-rpi-4-b.dtb \ bcm2711-rpi-cm4-io.dtb \ bcm2712-rpi-5-b.dtb \ - bcm2712-rpi-5-b-ovl-rp1.dtb \ bcm2712-d-rpi-5-b.dtb \ bcm2837-rpi-2-b.dtb \ bcm2837-rpi-3-a-plus.dtb \ diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi similarity index 100% rename from arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts rename to arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-base.dtsi diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts index 3e0319fdb93f..285608281446 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -1,22 +1,16 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) /* - * bcm2712-rpi-5-b-ovl-rp1.dts is the overlay-ready DT which will make - * the RP1 driver to load the RP1 dtb overlay at runtime, while - * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it - * already contains RP1 node, so no overlay is loaded nor needed). - * This file is intended to host the override nodes for the RP1 peripherals, - * e.g. to declare the phy of the ethernet interface or the custom pin setup - * for several RP1 peripherals. - * This in turn is due to the fact that there's no current generic - * infrastructure to reference nodes (i.e. the nodes in rp1-common.dtsi) that - * are not yet defined in the DT since they are loaded at runtime via overlay. + * As a loose attempt to separate RP1 customizations from SoC peripherals + * definitioni, this file is intended to host the override nodes for the RP1 + * peripherals, e.g. to declare the phy of the ethernet interface or custom + * pin setup. * All other nodes that do not have anything to do with RP1 should be added - * to the included bcm2712-rpi-5-b-ovl-rp1.dts instead. + * to the included bcm2712-rpi-5-b-base.dtsi instead. */ /dts-v1/; -#include "bcm2712-rpi-5-b-ovl-rp1.dts" +#include "bcm2712-rpi-5-b-base.dtsi" / { aliases { @@ -25,7 +19,26 @@ }; &pcie2 { - #include "rp1-nexus.dtsi" + pci@0,0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges; + bus-range = <0 1>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + + dev@0,0 { + compatible = "pci1de4,1"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x0 0x82010000 0x0 0x0 0x0 0x400000>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <3>; + #size-cells = <2>; + + #include "rp1-common.dtsi" + }; + }; }; &rp1_eth { From 9a96cc8bbeefbc64654ac9c3da619443c22f6d32 Mon Sep 17 00:00:00 2001 From: Andrea della Porta Date: Thu, 18 Dec 2025 20:09:09 +0100 Subject: [PATCH 035/283] arm64: dts: broadcom: rp1: drop RP1 overlay RP1 support loaded from overlay has been dropped from the driver and the DTB intended to be loaded with the overlay no longer exists. Drop unused include file and overlay. Signed-off-by: Andrea della Porta Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/85167b815d41ed9ed690ad239a19de5cd2e8be1c.1766077285.git.andrea.porta@suse.com Signed-off-by: Florian Fainelli --- arch/arm64/boot/dts/broadcom/Makefile | 3 +-- arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi | 14 -------------- arch/arm64/boot/dts/broadcom/rp1.dtso | 11 ----------- 3 files changed, 1 insertion(+), 27 deletions(-) delete mode 100644 arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi delete mode 100644 arch/arm64/boot/dts/broadcom/rp1.dtso diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index d43901404c95..01ecfa304184 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -13,8 +13,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \ bcm2837-rpi-3-b.dtb \ bcm2837-rpi-3-b-plus.dtb \ bcm2837-rpi-cm3-io3.dtb \ - bcm2837-rpi-zero-2-w.dtb \ - rp1.dtbo + bcm2837-rpi-zero-2-w.dtb subdir-y += bcmbca subdir-y += northstar2 diff --git a/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi b/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi deleted file mode 100644 index 0ef30d7f1c35..000000000000 --- a/arch/arm64/boot/dts/broadcom/rp1-nexus.dtsi +++ /dev/null @@ -1,14 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) - -rp1_nexus { - compatible = "pci1de4,1"; - #address-cells = <3>; - #size-cells = <2>; - ranges = <0x01 0x00 0x00000000 - 0x02000000 0x00 0x00000000 - 0x0 0x400000>; - interrupt-controller; - #interrupt-cells = <2>; - - #include "rp1-common.dtsi" -}; diff --git a/arch/arm64/boot/dts/broadcom/rp1.dtso b/arch/arm64/boot/dts/broadcom/rp1.dtso deleted file mode 100644 index ab4f146d22c0..000000000000 --- a/arch/arm64/boot/dts/broadcom/rp1.dtso +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR MIT) - -/dts-v1/; -/plugin/; - -&pcie2 { - #address-cells = <3>; - #size-cells = <2>; - - #include "rp1-nexus.dtsi" -}; From e4ca5ecc3c411f2fe970369f55bb72ac96adea85 Mon Sep 17 00:00:00 2001 From: Mac Chiang Date: Fri, 19 Dec 2025 11:49:02 +0800 Subject: [PATCH 036/283] ASoC: Intel: sof_sdw: shift SSP BT mask bits. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The SSP BT mask bits overlapped with SOC_SDW_CODEC_SPKR, SOC_SDW_SIDECAR_AMPS, and SOC_SDW_CODEC_MIC BIT[15–17] in sdw_utils.h. Shift the SSP BT mask bits to a higher range to eliminate the conflict. Signed-off-by: Mac Chiang Signed-off-by: Bard Liao Link: https://patch.msgid.link/20251219034902.3630537-1-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/sof_sdw_common.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/boards/sof_sdw_common.h b/sound/soc/intel/boards/sof_sdw_common.h index 3aa1dcec5172..5390f0a749d6 100644 --- a/sound/soc/intel/boards/sof_sdw_common.h +++ b/sound/soc/intel/boards/sof_sdw_common.h @@ -46,11 +46,11 @@ enum { #define SOC_SDW_NO_AGGREGATION BIT(14) /* BT audio offload: reserve 3 bits for future */ -#define SOF_BT_OFFLOAD_SSP_SHIFT 15 -#define SOF_BT_OFFLOAD_SSP_MASK (GENMASK(17, 15)) +#define SOF_BT_OFFLOAD_SSP_SHIFT 18 +#define SOF_BT_OFFLOAD_SSP_MASK (GENMASK(20, 18)) #define SOF_BT_OFFLOAD_SSP(quirk) \ (((quirk) << SOF_BT_OFFLOAD_SSP_SHIFT) & SOF_BT_OFFLOAD_SSP_MASK) -#define SOF_SSP_BT_OFFLOAD_PRESENT BIT(18) +#define SOF_SSP_BT_OFFLOAD_PRESENT BIT(21) struct intel_mc_ctx { struct sof_hdmi_private hdmi; From a0c8ee09f94ba5a29ee5f7557eb2bc100d5e739a Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Fri, 19 Dec 2025 11:49:37 +0800 Subject: [PATCH 037/283] ASoC: SOF: Intel: add -bt tplg suffix if BT is present MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to distinguish the topologies with and without BT PCM. Signed-off-by: Bard Liao Reviewed-by: Kai Vehmanen Reviewed-by: Péter Ujfalusi Link: https://patch.msgid.link/20251219034937.3630569-1-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown --- sound/soc/sof/intel/hda.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c index c1518dbee1b7..0bb85f92e106 100644 --- a/sound/soc/sof/intel/hda.c +++ b/sound/soc/sof/intel/hda.c @@ -1549,6 +1549,7 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev) * name string if quirk flag is set. */ if (mach) { + const struct sof_intel_dsp_desc *chip = get_chip_info(sdev->pdata); bool tplg_fixup = false; bool dmic_fixup = false; @@ -1598,6 +1599,18 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev) sof_pdata->tplg_filename = tplg_filename; } + if (tplg_fixup && mach->mach_params.bt_link_mask && + chip->hw_ip_version >= SOF_INTEL_ACE_4_0) { + int bt_port = fls(mach->mach_params.bt_link_mask) - 1; + + tplg_filename = devm_kasprintf(sdev->dev, GFP_KERNEL, "%s-ssp%d-bt", + sof_pdata->tplg_filename, bt_port); + if (!tplg_filename) + return NULL; + + sof_pdata->tplg_filename = tplg_filename; + } + if (mach->link_mask) { mach->mach_params.links = mach->links; mach->mach_params.link_mask = mach->link_mask; @@ -1609,7 +1622,6 @@ struct snd_soc_acpi_mach *hda_machine_select(struct snd_sof_dev *sdev) if (tplg_fixup && mach->tplg_quirk_mask & SND_SOC_ACPI_TPLG_INTEL_SSP_NUMBER && mach->mach_params.i2s_link_mask) { - const struct sof_intel_dsp_desc *chip = get_chip_info(sdev->pdata); int ssp_num; int mclk_mask; From 54fa71f5f965fa3ec8846cef9d1154bcb2ba2850 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 19 Dec 2025 15:27:13 +0100 Subject: [PATCH 038/283] ASoC: codecs: pm4125: drop bogus container_of() error handling The dev_to_sdw_dev() helper uses container_of() to return the containing soundwire device structure of its pointer argument and will never return NULL. Fixes: 8ad529484937 ("ASoC: codecs: add new pm4125 audio codec driver") Cc: Alexey Klimov Signed-off-by: Johan Hovold Acked-by: Alexey Klimov Reviewed-by: Dmitry Baryshkov Link: https://patch.msgid.link/20251219142715.19254-2-johan@kernel.org Signed-off-by: Mark Brown --- sound/soc/codecs/pm4125.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/sound/soc/codecs/pm4125.c b/sound/soc/codecs/pm4125.c index 8bc3b9994019..4798cd8be9f8 100644 --- a/sound/soc/codecs/pm4125.c +++ b/sound/soc/codecs/pm4125.c @@ -1537,13 +1537,7 @@ static int pm4125_bind(struct device *dev) pm4125->sdw_priv[AIF1_CAP] = dev_get_drvdata(pm4125->txdev); pm4125->sdw_priv[AIF1_CAP]->pm4125 = pm4125; - pm4125->tx_sdw_dev = dev_to_sdw_dev(pm4125->txdev); - if (!pm4125->tx_sdw_dev) { - dev_err(dev, "could not get txslave with matching of dev\n"); - ret = -EINVAL; - goto error_put_tx; - } /* * As TX is the main CSR reg interface, which should not be suspended first. From 61a50d6f58b41e8a7e68d8fc8fc6bfbe30d790d8 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 19 Dec 2025 15:27:14 +0100 Subject: [PATCH 039/283] ASoC: codecs: wcd937x: drop bogus container_of() error handling The dev_to_sdw_dev() helper uses container_of() to return the containing soundwire device structure of its pointer argument and will never return NULL. Fixes: 9be3ec196da4 ("ASoC: codecs: wcd937x: add wcd937x codec driver") Cc: Prasad Kumpatla Signed-off-by: Johan Hovold Reviewed-by: Dmitry Baryshkov Link: https://patch.msgid.link/20251219142715.19254-3-johan@kernel.org Signed-off-by: Mark Brown --- sound/soc/codecs/wcd937x.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/sound/soc/codecs/wcd937x.c b/sound/soc/codecs/wcd937x.c index f4dbcf04be49..10a2d598caa7 100644 --- a/sound/soc/codecs/wcd937x.c +++ b/sound/soc/codecs/wcd937x.c @@ -2763,11 +2763,6 @@ static int wcd937x_bind(struct device *dev) wcd937x->sdw_priv[AIF1_CAP] = dev_get_drvdata(wcd937x->txdev); wcd937x->sdw_priv[AIF1_CAP]->wcd937x = wcd937x; wcd937x->tx_sdw_dev = dev_to_sdw_dev(wcd937x->txdev); - if (!wcd937x->tx_sdw_dev) { - dev_err(dev, "could not get txslave with matching of dev\n"); - ret = -EINVAL; - goto err_put_txdev; - } /* * As TX is the main CSR reg interface, which should not be suspended first. From 870b10f61d527fec594e0888f18cc4f32c47433d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 19 Dec 2025 15:27:15 +0100 Subject: [PATCH 040/283] ASoC: soc_sdw_utils: drop bogus container_of() error handling The dev_to_sdw_dev() helper uses container_of() to return the containing soundwire device structure of its pointer argument and will never return NULL. Fixes: 4f8ef33dd44a ("ASoC: soc_sdw_utils: skip the endpoint that doesn't present") Cc: Bard Liao Signed-off-by: Johan Hovold Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Link: https://patch.msgid.link/20251219142715.19254-4-johan@kernel.org Signed-off-by: Mark Brown --- sound/soc/sdw_utils/soc_sdw_utils.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/sound/soc/sdw_utils/soc_sdw_utils.c b/sound/soc/sdw_utils/soc_sdw_utils.c index f169d95895ea..bf382aa07e92 100644 --- a/sound/soc/sdw_utils/soc_sdw_utils.c +++ b/sound/soc/sdw_utils/soc_sdw_utils.c @@ -1414,10 +1414,6 @@ static int is_sdca_endpoint_present(struct device *dev, } slave = dev_to_sdw_dev(sdw_dev); - if (!slave) { - ret = -EINVAL; - goto put_device; - } /* Make sure BIOS provides SDCA properties */ if (!slave->sdca_data.interface_revision) { From c4c6db7ac54649c0cfe7d86b4a5358296dc8d08b Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 16 Dec 2025 10:40:42 +0100 Subject: [PATCH 041/283] MAINTAINERS: Fix a linusw mail address The patch adding me to the SoC maintainers was in-flight at the time I had to change my mail address. This fixes it up. Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251216-maintainers-fix-v1-1-92f11231b27e@kernel.org Signed-off-by: Krzysztof Kozlowski --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5b11839cba9d..15c4dacfa5f7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2011,7 +2011,7 @@ ARM AND ARM64 SoC SUB-ARCHITECTURES (COMMON PARTS) M: Arnd Bergmann M: Krzysztof Kozlowski M: Alexandre Belloni -M: Linus Walleij +M: Linus Walleij R: Drew Fustini L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: soc@lists.linux.dev From 23f9485510c338476b9735d516c1d4aacb810d46 Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Tue, 18 Nov 2025 09:35:48 +0100 Subject: [PATCH 042/283] counter: interrupt-cnt: Drop IRQF_NO_THREAD flag An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as CONFIG_PROVE_RAW_LOCK_NESTING warns: ============================= [ BUG: Invalid wait context ] 6.18.0-rc1+git... #1 ----------------------------- some-user-space-process/1251 is trying to lock: (&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter] other info that might help us debug this: context-{2:2} no locks held by some-user-space-process/.... stack backtrace: CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT Call trace: show_stack (C) dump_stack_lvl dump_stack __lock_acquire lock_acquire _raw_spin_lock_irqsave counter_push_event [counter] interrupt_cnt_isr [interrupt_cnt] __handle_irq_event_percpu handle_irq_event handle_simple_irq handle_irq_desc generic_handle_domain_irq gpio_irq_handler handle_irq_desc generic_handle_domain_irq gic_handle_irq call_on_irq_stack do_interrupt_handler el0_interrupt __el0_irq_handler_common el0t_64_irq_handler el0t_64_irq ... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an alternative to switching to raw_spinlock_t, because the latter would limit all potential nested locks to raw_spinlock_t only. Cc: Sebastian Andrzej Siewior Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20251117151314.xwLAZrWY@linutronix.de/ Fixes: a55ebd47f21f ("counter: add IRQ or GPIO based counter") Signed-off-by: Alexander Sverdlin Reviewed-by: Sebastian Andrzej Siewior Reviewed-by: Oleksij Rempel Link: https://lore.kernel.org/r/20251118083603.778626-1-alexander.sverdlin@siemens.com Signed-off-by: William Breathitt Gray --- drivers/counter/interrupt-cnt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/counter/interrupt-cnt.c b/drivers/counter/interrupt-cnt.c index 6c0c1d2d7027..e6100b5fb082 100644 --- a/drivers/counter/interrupt-cnt.c +++ b/drivers/counter/interrupt-cnt.c @@ -229,8 +229,7 @@ static int interrupt_cnt_probe(struct platform_device *pdev) irq_set_status_flags(priv->irq, IRQ_NOAUTOEN); ret = devm_request_irq(dev, priv->irq, interrupt_cnt_isr, - IRQF_TRIGGER_RISING | IRQF_NO_THREAD, - dev_name(dev), counter); + IRQF_TRIGGER_RISING, dev_name(dev), counter); if (ret) return ret; From 9517d76dd160208b7a432301ce7bec8fc1ddc305 Mon Sep 17 00:00:00 2001 From: Haotian Zhang Date: Mon, 15 Dec 2025 10:01:14 +0800 Subject: [PATCH 043/283] counter: 104-quad-8: Fix incorrect return value in IRQ handler quad8_irq_handler() should return irqreturn_t enum values, but it directly returns negative errno codes from regmap operations on error. Return IRQ_NONE if the interrupt status cannot be read. If clearing the interrupt fails, return IRQ_HANDLED to prevent the kernel from disabling the IRQ line due to a spurious interrupt storm. Also, log these regmap failures with dev_WARN_ONCE. Fixes: 98ffe0252911 ("counter: 104-quad-8: Migrate to the regmap API") Suggested-by: Andy Shevchenko Signed-off-by: Haotian Zhang Link: https://lore.kernel.org/r/20251215020114.1913-1-vulab@iscas.ac.cn Cc: stable@vger.kernel.org Signed-off-by: William Breathitt Gray --- drivers/counter/104-quad-8.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c index ce81fc4e1ae7..573b2fe93253 100644 --- a/drivers/counter/104-quad-8.c +++ b/drivers/counter/104-quad-8.c @@ -1192,6 +1192,7 @@ static irqreturn_t quad8_irq_handler(int irq, void *private) { struct counter_device *counter = private; struct quad8 *const priv = counter_priv(counter); + struct device *dev = counter->parent; unsigned int status; unsigned long irq_status; unsigned long channel; @@ -1200,8 +1201,11 @@ static irqreturn_t quad8_irq_handler(int irq, void *private) int ret; ret = regmap_read(priv->map, QUAD8_INTERRUPT_STATUS, &status); - if (ret) - return ret; + if (ret) { + dev_WARN_ONCE(dev, true, + "Attempt to read Interrupt Status Register failed: %d\n", ret); + return IRQ_NONE; + } if (!status) return IRQ_NONE; @@ -1223,8 +1227,9 @@ static irqreturn_t quad8_irq_handler(int irq, void *private) break; default: /* should never reach this path */ - WARN_ONCE(true, "invalid interrupt trigger function %u configured for channel %lu\n", - flg_pins, channel); + dev_WARN_ONCE(dev, true, + "invalid interrupt trigger function %u configured for channel %lu\n", + flg_pins, channel); continue; } @@ -1232,8 +1237,11 @@ static irqreturn_t quad8_irq_handler(int irq, void *private) } ret = regmap_write(priv->map, QUAD8_CHANNEL_OPERATION, CLEAR_PENDING_INTERRUPTS); - if (ret) - return ret; + if (ret) { + dev_WARN_ONCE(dev, true, + "Attempt to clear pending interrupts by writing to Channel Operation Register failed: %d\n", ret); + return IRQ_HANDLED; + } return IRQ_HANDLED; } From 97af54473f2a79f663bd14d7c75e97d04bd0e283 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 19 Dec 2025 15:24:12 +0100 Subject: [PATCH 044/283] ASoC: codecs: pm4125: clean up bind() device reference handling A recent change fixed a couple of device leaks on component bind failure and on unbind but did so in a confusing way by adding misleading initialisations at bind() and bogus NULL checks at unbind(). Cc: Ma Ke Signed-off-by: Johan Hovold Reviewed-by: Dmitry Baryshkov Link: https://patch.msgid.link/20251219142412.19043-1-johan@kernel.org Signed-off-by: Mark Brown --- sound/soc/codecs/pm4125.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/sound/soc/codecs/pm4125.c b/sound/soc/codecs/pm4125.c index 8bc3b9994019..43dcafff6c77 100644 --- a/sound/soc/codecs/pm4125.c +++ b/sound/soc/codecs/pm4125.c @@ -1505,10 +1505,6 @@ static int pm4125_bind(struct device *dev) struct device_link *devlink; int ret; - /* Initialize device pointers to NULL for safe cleanup */ - pm4125->rxdev = NULL; - pm4125->txdev = NULL; - /* Give the soundwire subdevices some more time to settle */ usleep_range(15000, 15010); @@ -1624,11 +1620,8 @@ static void pm4125_unbind(struct device *dev) device_link_remove(dev, pm4125->rxdev); device_link_remove(pm4125->rxdev, pm4125->txdev); - /* Release device references acquired in bind */ - if (pm4125->txdev) - put_device(pm4125->txdev); - if (pm4125->rxdev) - put_device(pm4125->rxdev); + put_device(pm4125->txdev); + put_device(pm4125->rxdev); component_unbind_all(dev, pm4125); } From 6c11aa2b4cf767f5ccfe290b2572d53102dbe5ea Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 21 Dec 2025 11:57:13 +0800 Subject: [PATCH 045/283] ASoC: sun4i-spdif: Add missing kerneldoc fields for sun4i_spdif_quirks When sun4i_spdif_quirks was recently expanded, the kerneldoc covering the structure was not expanded to match. This ends up causing a warning when the documents are built. Add the missing fields. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202501311953.0Ox9CW5w-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202503060947.QKUUR62l-lkp@intel.com/ Fixes: 0a2319308de8 ("ASoC: sun4i-spdif: Add clock multiplier settings") Fixes: 4a5ac6cd05a7 ("ASoC: sun4i-spdif: Support SPDIF output on A523 family") Signed-off-by: Chen-Yu Tsai Reviewed-by: Marcus Cooper Acked-by: Jernej Skrabec Link: https://patch.msgid.link/20251221035715.1722584-1-wens@kernel.org Signed-off-by: Mark Brown --- sound/soc/sunxi/sun4i-spdif.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c index 2e7ac8ab71bb..1e755a716c63 100644 --- a/sound/soc/sunxi/sun4i-spdif.c +++ b/sound/soc/sunxi/sun4i-spdif.c @@ -171,6 +171,8 @@ * @reg_dac_txdata: TX FIFO offset for DMA config. * @has_reset: SoC needs reset deasserted. * @val_fctl_ftx: TX FIFO flush bitmask. + * @mclk_multiplier: ratio of internal MCLK divider + * @tx_clk_name: name of TX module clock if split clock design */ struct sun4i_spdif_quirks { unsigned int reg_dac_txdata; From 830988b6cf197e6dcffdfe2008c5738e6c6c3c0f Mon Sep 17 00:00:00 2001 From: Haoxiang Li Date: Sat, 20 Dec 2025 00:28:45 +0800 Subject: [PATCH 046/283] ALSA: ac97: fix a double free in snd_ac97_controller_register() If ac97_add_adapter() fails, put_device() is the correct way to drop the device reference. kfree() is not required. Add kfree() if idr_alloc() fails and in ac97_adapter_release() to do the cleanup. Found by code review. Fixes: 74426fbff66e ("ALSA: ac97: add an ac97 bus") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Link: https://patch.msgid.link/20251219162845.657525-1-lihaoxiang@isrc.iscas.ac.cn Signed-off-by: Takashi Iwai --- sound/ac97/bus.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/ac97/bus.c b/sound/ac97/bus.c index f4254703d29f..bb9b795e0226 100644 --- a/sound/ac97/bus.c +++ b/sound/ac97/bus.c @@ -298,6 +298,7 @@ static void ac97_adapter_release(struct device *dev) idr_remove(&ac97_adapter_idr, ac97_ctrl->nr); dev_dbg(&ac97_ctrl->adap, "adapter unregistered by %s\n", dev_name(ac97_ctrl->parent)); + kfree(ac97_ctrl); } static const struct device_type ac97_adapter_type = { @@ -319,7 +320,9 @@ static int ac97_add_adapter(struct ac97_controller *ac97_ctrl) ret = device_register(&ac97_ctrl->adap); if (ret) put_device(&ac97_ctrl->adap); - } + } else + kfree(ac97_ctrl); + if (!ret) { list_add(&ac97_ctrl->controllers, &ac97_controllers); dev_dbg(&ac97_ctrl->adap, "adapter registered by %s\n", @@ -361,14 +364,11 @@ struct ac97_controller *snd_ac97_controller_register( ret = ac97_add_adapter(ac97_ctrl); if (ret) - goto err; + return ERR_PTR(ret); ac97_bus_reset(ac97_ctrl); ac97_bus_scan(ac97_ctrl); return ac97_ctrl; -err: - kfree(ac97_ctrl); - return ERR_PTR(ret); } EXPORT_SYMBOL_GPL(snd_ac97_controller_register); From e340663bbf2a75dae5d4fddf90b49281f5c9df3f Mon Sep 17 00:00:00 2001 From: August Wikerfors Date: Mon, 22 Dec 2025 20:47:04 +0100 Subject: [PATCH 047/283] ALSA: hda/tas2781: properly initialize speaker_id for TAS2563 After speaker id retrieval was refactored to happen in tas2781_read_acpi, devices that do not use a speaker id need a negative speaker_id value instead of NULL, but no initialization was added to the TAS2563 code path. This causes the driver to attempt to load a non-existent firmware file name with a speaker id of 0 ("TAS2XXX38700.bin") instead of the correct file name without a speaker id ("TAS2XXX3870.bin"), resulting in low volume and these dmesg errors: tas2781-hda i2c-INT8866:00: Direct firmware load for TAS2XXX38700.bin failed with error -2 tas2781-hda i2c-INT8866:00: tasdevice_dsp_parser: load TAS2XXX38700.bin error tas2781-hda i2c-INT8866:00: dspfw load TAS2XXX38700.bin error [...] tas2781-hda i2c-INT8866:00: tasdevice_prmg_load: Firmware is NULL Fix this by setting speaker_id to -1 as is done for other models. Fixes: 945865a0ddf3 ("ALSA: hda/tas2781: fix speaker id retrieval for multiple probes") Cc: stable@vger.kernel.org Signed-off-by: August Wikerfors Link: https://patch.msgid.link/20251222194704.87232-1-git@augustwikerfors.se Signed-off-by: Takashi Iwai --- sound/hda/codecs/side-codecs/tas2781_hda_i2c.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c index c8619995b1d7..f7a7f216d586 100644 --- a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c +++ b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c @@ -111,8 +111,10 @@ static int tas2781_read_acpi(struct tasdevice_priv *p, const char *hid) sub = acpi_get_subsystem_id(ACPI_HANDLE(physdev)); if (IS_ERR(sub)) { /* No subsys id in older tas2563 projects. */ - if (!strncmp(hid, "INT8866", sizeof("INT8866"))) + if (!strncmp(hid, "INT8866", sizeof("INT8866"))) { + p->speaker_id = -1; goto end_2563; + } dev_err(p->dev, "Failed to get SUBSYS ID.\n"); ret = PTR_ERR(sub); goto err; From 570ad253a3455a520f03c2136af8714bc780186d Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 20 Dec 2025 12:31:40 +0000 Subject: [PATCH 048/283] netfs: Fix early read unlock of page with EOF in middle The read result collection for buffered reads seems to run ahead of the completion of subrequests under some circumstances, as can be seen in the following log snippet: 9p_client_res: client 18446612686390831168 response P9_TREAD tag 0 err 0 ... netfs_sreq: R=00001b55[1] DOWN TERM f=192 s=0 5fb2/5fb2 s=5 e=0 ... netfs_collect_folio: R=00001b55 ix=00004 r=4000-5000 t=4000/5fb2 netfs_folio: i=157f3 ix=00004-00004 read-done netfs_folio: i=157f3 ix=00004-00004 read-unlock netfs_collect_folio: R=00001b55 ix=00005 r=5000-5fb2 t=5000/5fb2 netfs_folio: i=157f3 ix=00005-00005 read-done netfs_folio: i=157f3 ix=00005-00005 read-unlock ... netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=c netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=8 ... netfs_sreq: R=00001b55[2] ZERO SUBMT f=000 s=5fb2 0/4e s=0 e=0 netfs_sreq: R=00001b55[2] ZERO TERM f=102 s=5fb2 4e/4e s=5 e=0 The 'cto=5fb2' indicates the collected file pos we've collected results to so far - but we still have 0x4e more bytes to go - so we shouldn't have collected folio ix=00005 yet. The 'ZERO' subreq that clears the tail happens after we unlock the folio, allowing the application to see the uncleared tail through mmap. The problem is that netfs_read_unlock_folios() will unlock a folio in which the amount of read results collected hits EOF position - but the ZERO subreq lies beyond that and so happens after. Fix this by changing the end check to always be the end of the folio and never the end of the file. In the future, I should look at clearing to the end of the folio here rather than adding a ZERO subreq to do this. On the other hand, the ZERO subreq can run in parallel with an async READ subreq. Further, the ZERO subreq may still be necessary to, say, handle extents in a ceph file that don't have any backing store and are thus implicitly all zeros. This can be reproduced by creating a file, the size of which doesn't align to a page boundary, e.g. 24998 (0x5fb2) bytes and then doing something like: xfs_io -c "mmap -r 0 0x6000" -c "madvise -d 0 0x6000" \ -c "mread -v 0 0x6000" /xfstest.test/x The last 0x4e bytes should all be 00, but if the tail hasn't been cleared yet, you may see rubbish there. This can be reproduced with kafs by modifying the kernel to disable the call to netfs_read_subreq_progress() and to stop afs_issue_read() from doing the async call for NETFS_READAHEAD. Reproduction can be made easier by inserting an mdelay(100) in netfs_issue_read() for the ZERO-subreq case. AFS and CIFS are normally unlikely to show this as they dispatch READ ops asynchronously, which allows the ZERO-subreq to finish first. 9P's READ op is completely synchronous, so the ZERO-subreq will always happen after. It isn't seen all the time, though, because the collection may be done in a worker thread. Reported-by: Christian Schoenebeck Link: https://lore.kernel.org/r/8622834.T7Z3S40VBb@weasel/ Signed-off-by: David Howells Link: https://patch.msgid.link/938162.1766233900@warthog.procyon.org.uk Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item") Tested-by: Christian Schoenebeck Acked-by: Dominique Martinet Suggested-by: Dominique Martinet cc: Dominique Martinet cc: Christian Schoenebeck cc: v9fs@lists.linux.dev cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/read_collect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/netfs/read_collect.c b/fs/netfs/read_collect.c index a95e7aadafd0..7a0ffa675fb1 100644 --- a/fs/netfs/read_collect.c +++ b/fs/netfs/read_collect.c @@ -137,7 +137,7 @@ static void netfs_read_unlock_folios(struct netfs_io_request *rreq, rreq->front_folio_order = order; fsize = PAGE_SIZE << order; fpos = folio_pos(folio); - fend = umin(fpos + fsize, rreq->i_size); + fend = fpos + fsize; trace_netfs_collect_folio(rreq, folio, fend, collected_to); From 46af9ae1305f1025fd9ff7d8945de98a6ec0a52b Mon Sep 17 00:00:00 2001 From: Mateusz Guzik Date: Sat, 20 Dec 2025 06:40:22 +0100 Subject: [PATCH 049/283] fs: make sure to fail try_to_unlazy() and try_to_unlazy() for LOOKUP_CACHED Otherwise the slowpath can be taken by the caller, defeating the flag. This regressed after calls to legitimize_links() started being conditionally elided and stems from the routine always failing after seeing the flag, regardless if there were any links. In order to address both the bug and the weird semantics make it illegal to call legitimize_links() with LOOKUP_CACHED and handle the problem at the two callsites. Fixes: 7c179096e77eca21 ("fs: add predicts based on nd->depth") Reported-by: Chris Mason Signed-off-by: Mateusz Guzik Link: https://patch.msgid.link/20251220054023.142134-1-mjguzik@gmail.com Signed-off-by: Christian Brauner --- fs/namei.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index bf0f66f0e9b9..f7a8b5b000c2 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -830,11 +830,9 @@ static inline bool legitimize_path(struct nameidata *nd, static bool legitimize_links(struct nameidata *nd) { int i; - if (unlikely(nd->flags & LOOKUP_CACHED)) { - drop_links(nd); - nd->depth = 0; - return false; - } + + VFS_BUG_ON(nd->flags & LOOKUP_CACHED); + for (i = 0; i < nd->depth; i++) { struct saved *last = nd->stack + i; if (unlikely(!legitimize_path(nd, &last->link, last->seq))) { @@ -883,6 +881,11 @@ static bool try_to_unlazy(struct nameidata *nd) BUG_ON(!(nd->flags & LOOKUP_RCU)); + if (unlikely(nd->flags & LOOKUP_CACHED)) { + drop_links(nd); + nd->depth = 0; + goto out1; + } if (unlikely(nd->depth && !legitimize_links(nd))) goto out1; if (unlikely(!legitimize_path(nd, &nd->path, nd->seq))) @@ -918,6 +921,11 @@ static bool try_to_unlazy_next(struct nameidata *nd, struct dentry *dentry) int res; BUG_ON(!(nd->flags & LOOKUP_RCU)); + if (unlikely(nd->flags & LOOKUP_CACHED)) { + drop_links(nd); + nd->depth = 0; + goto out2; + } if (unlikely(nd->depth && !legitimize_links(nd))) goto out2; res = __legitimize_mnt(nd->path.mnt, nd->m_seq); From fe33729d2907415ff953d84673caebca628cbd77 Mon Sep 17 00:00:00 2001 From: Bagas Sanjaya Date: Fri, 19 Dec 2025 09:46:19 +0700 Subject: [PATCH 050/283] fs: Describe @isnew parameter in ilookup5_nowait() Sphinx reports kernel-doc warning: WARNING: ./fs/inode.c:1607 function parameter 'isnew' not described in 'ilookup5_nowait' Describe the parameter. Fixes: a27628f4363435 ("fs: rework I_NEW handling to operate without fences") Signed-off-by: Bagas Sanjaya Link: https://patch.msgid.link/20251219024620.22880-2-bagasdotme@gmail.com Reviewed-by: Jeff Layton Reviewed-by: Jan Kara Signed-off-by: Christian Brauner --- fs/inode.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/inode.c b/fs/inode.c index 521383223d8a..379f4c19845c 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -1593,6 +1593,9 @@ EXPORT_SYMBOL(igrab); * @hashval: hash value (usually inode number) to search for * @test: callback used for comparisons between inodes * @data: opaque data pointer to pass to @test + * @isnew: return argument telling whether I_NEW was set when + * the inode was found in hash (the caller needs to + * wait for I_NEW to clear) * * Search for the inode specified by @hashval and @data in the inode cache. * If the inode is in the cache, the inode is returned with an incremented From 73a91ef328a9d728c7f3357f925980937f0d520c Mon Sep 17 00:00:00 2001 From: Bagas Sanjaya Date: Fri, 19 Dec 2025 09:46:20 +0700 Subject: [PATCH 051/283] VFS: fix __start_dirop() kernel-doc warnings Sphinx report kernel-doc warnings: WARNING: ./fs/namei.c:2853 function parameter 'state' not described in '__start_dirop' WARNING: ./fs/namei.c:2853 expecting prototype for start_dirop(). Prototype was for __start_dirop() instead Fix them up. Fixes: ff7c4ea11a05c8 ("VFS: add start_creating_killable() and start_removing_killable()") Signed-off-by: Bagas Sanjaya Link: https://patch.msgid.link/20251219024620.22880-3-bagasdotme@gmail.com Reviewed-by: Jeff Layton Reviewed-by: Jan Kara Signed-off-by: Christian Brauner --- fs/namei.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/namei.c b/fs/namei.c index f7a8b5b000c2..cf16b6822dd3 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2844,10 +2844,11 @@ static int filename_parentat(int dfd, struct filename *name, } /** - * start_dirop - begin a create or remove dirop, performing locking and lookup + * __start_dirop - begin a create or remove dirop, performing locking and lookup * @parent: the dentry of the parent in which the operation will occur * @name: a qstr holding the name within that parent * @lookup_flags: intent and other lookup flags. + * @state: task state bitmask * * The lookup is performed and necessary locks are taken so that, on success, * the returned dentry can be operated on safely. From 3dd57ddec9e3a98387196a3f53b8c036977d8c0f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 16 Dec 2025 08:19:39 +0000 Subject: [PATCH 052/283] get rid of bogus __user in struct xattr_args::value The first member of struct xattr_args is declared as __aligned_u64 __user value; which makes no sense whatsoever; __user is a qualifier and what that declaration says is "all struct xattr_args instances have .value _stored_ in user address space, no matter where the rest of the structure happens to be". Something like "int __user *p" stands for "value of p is a pointer to an instance of int that happens to live in user address space"; it says nothing about location of p itself, just as const char *p declares a pointer to unmodifiable char rather than an unmodifiable pointer to char. With xattr_args the intent clearly had been "the 64bit value represents a _pointer_ to object in user address space", but __user has nothing to do with that. All it gets us is a couple of bogus warnings in fs/xattr.c where (userland) instance of xattr_args is copied to local variable of that type (in kernel address space), followed by access to its members. Since we've told sparse that args.value must somehow be located in userland memory, we get warned that looking at that 64bit unsigned integer (in a variable already on kernel stack) is not allowed. Note that sparse has no way to express "this integer shall never be cast into a pointer to be dereferenced directly" and I don't see any way to assign a sane semantics to that. In any case, __user is not it. Signed-off-by: Al Viro Link: https://patch.msgid.link/20251216081939.GQ1712166@ZenIV Signed-off-by: Christian Brauner --- include/uapi/linux/xattr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/xattr.h b/include/uapi/linux/xattr.h index c7c85bb504ba..2e5aef48fa7e 100644 --- a/include/uapi/linux/xattr.h +++ b/include/uapi/linux/xattr.h @@ -23,7 +23,7 @@ #define XATTR_REPLACE 0x2 /* set value, fail if attr does not exist */ struct xattr_args { - __aligned_u64 __user value; + __aligned_u64 value; __u32 size; __u32 flags; }; From 5f9ad16bccd351321d9cd65726fd09390d34b06c Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 23 Dec 2025 13:41:52 -0600 Subject: [PATCH 053/283] ecryptfs: Fix improper mknod pairing of start_creating()/end_removing() The ecryptfs_start_creating_dentry() function must be paired with the end_creating() function. Fix ecryptfs_mknod() so that end_creating() is properly called in the return path, instead of end_removing(). Fixes: f046fbb4d81d ("ecryptfs: use new start_creating/start_removing APIs") Signed-off-by: Tyler Hicks Link: https://patch.msgid.link/20251223194153.2818445-2-code@tyhicks.com Reviewed-by: Amir Goldstein Signed-off-by: Christian Brauner --- fs/ecryptfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 3978248247dc..e73d9de676a6 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -584,7 +584,7 @@ ecryptfs_mknod(struct mnt_idmap *idmap, struct inode *dir, fsstack_copy_attr_times(dir, lower_dir); fsstack_copy_inode_size(dir, lower_dir); out: - end_removing(lower_dentry); + end_creating(lower_dentry); if (d_really_is_negative(dentry)) d_drop(dentry); return rc; From 5c56afd204ad266d23889ee8823fb65b2c3b63da Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 23 Dec 2025 13:41:53 -0600 Subject: [PATCH 054/283] ecryptfs: Release lower parent dentry after creating dir Fix a mkdir-induced usage count imbalance that tripped a umount_check() BUG while unmounting the lower filesystem. Commit f046fbb4d81d ("ecryptfs: use new start_creating/start_removing APIs") added a new dget() of the lower parent dir, in ecryptfs_mkdir(), but did not dput() the dentry before returning from that function. The BUG output as seen while running the eCryptfs test suite: $ ./run_tests.sh -b 131072 -c safe,destructive -f ext4 -K -t lp-926292.sh ... Running eCryptfs filesystem tests on ext4 lp-926292 ------------[ cut here ]------------ BUG: Dentry ffff8e6692d11988{i=c,n=ECRYPTFS_FNEK_ENCRYPTED.FXZuRGZL7QAFtER.JeA46DtdKqkkQx9H2Vpmv234J5CU8YSsrUwZJK4AbXbrN5WkZ348wnqstovKKxA-} still in use (1) [unmount of ext4 loop0] WARNING: CPU: 7 PID: 950 at fs/dcache.c:1590 umount_check+0x5e/0x80 Modules linked in: md5 libmd5 ecryptfs encrypted_keys ext4 crc16 mbcache jbd2 CPU: 7 UID: 0 PID: 950 Comm: umount Not tainted 6.18.0-rc1-00013-gf046fbb4d81d #17 PREEMPT(full) Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 RIP: 0010:umount_check+0x5e/0x80 Code: 88 38 06 00 00 48 8b 40 28 4c 8b 08 48 8b 46 68 48 85 c0 74 04 48 8b 50 38 51 48 c7 c7 60 32 9c b5 48 89 f1 e8 43 5e ca ff 90 <0f> 0b 90 90 58 31 c0 e9 46 9d 6c 00 41 83 f8 01 75 b8 eb a3 66 66 RSP: 0018:ffffa19940c4bdd0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8e6692fad4c0 RCX: 0000000000000000 RDX: 0000000000000004 RSI: ffffa19940c4bc70 RDI: 00000000ffffffff RBP: ffffffffb4eb5930 R08: 00000000ffffdfff R09: 0000000000000001 R10: 00000000ffffdfff R11: ffffffffb5c8a9e0 R12: ffff8e6692fad4c0 R13: ffff8e6692fad4c0 R14: ffff8e6692d11a40 R15: ffff8e6692d11988 FS: 00007f6b4b491800(0000) GS:ffff8e670506e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6b4b5f8d40 CR3: 0000000114eb7001 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: d_walk+0xfd/0x370 shrink_dcache_for_umount+0x4d/0x140 generic_shutdown_super+0x20/0x160 kill_block_super+0x1a/0x40 ext4_kill_sb+0x22/0x40 [ext4] deactivate_locked_super+0x33/0xa0 cleanup_mnt+0xba/0x150 task_work_run+0x5c/0xa0 exit_to_user_mode_loop+0xac/0xb0 do_syscall_64+0x2ab/0xfa0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f6b4b6c2a2b Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 a6 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 05 c3 0f 1f 40 00 48 8b 15 b9 83 0d 00 f7 d8 RSP: 002b:00007ffcd5b8b498 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 000055b84af0b9e0 RCX: 00007f6b4b6c2a2b RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000055b84af0bdf0 RBP: 00007ffcd5b8b570 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000103 R11: 0000000000000246 R12: 000055b84af0bae0 R13: 0000000000000000 R14: 000055b84af0bdf0 R15: 0000000000000000 ---[ end trace 0000000000000000 ]--- EXT4-fs (loop0): unmounting filesystem 00d9ea41-f61e-43d0-a449-6be03e7e8428. EXT4-fs (loop0): sb orphan head is 12 sb_info orphan list: inode loop0:12 at ffff8e66950e1df0: mode 40700, nlink 0, next 0 Assertion failure in ext4_put_super() at fs/ext4/super.c:1345: 'list_empty(&sbi->s_orphan)' Fixes: f046fbb4d81d ("ecryptfs: use new start_creating/start_removing APIs") Signed-off-by: Tyler Hicks Link: https://patch.msgid.link/20251223194153.2818445-3-code@tyhicks.com Reviewed-by: Amir Goldstein Signed-off-by: Christian Brauner --- fs/ecryptfs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index e73d9de676a6..8ab014db3e03 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -533,6 +533,7 @@ static struct dentry *ecryptfs_mkdir(struct mnt_idmap *idmap, struct inode *dir, fsstack_copy_inode_size(dir, lower_dir); set_nlink(dir, lower_dir->i_nlink); out: + dput(lower_dir_dentry); end_creating(lower_dentry); if (d_really_is_negative(dentry)) d_drop(dentry); From de0bdcaf36494c9d91653cb062766846f7c51041 Mon Sep 17 00:00:00 2001 From: Danilo Krummrich Date: Tue, 23 Dec 2025 12:59:47 +0100 Subject: [PATCH 055/283] MAINTAINERS: fix typo in TYR DRM driver entry Fix a missing ':' in the ARM MALI TYR DRM DRIVER entry, which does prevent script/get_maintainer.pl to properly work and pick up the corresponding maintainers. Fixes: cf4fd52e3236 ("rust: drm: Introduce the Tyr driver for Arm Mali GPUs") Reported-by: Tamir Duberstein Closes: https://lore.kernel.org/lkml/CAJ-ks9mrZtnPUjp5tD03hW+TyS0M9i-KRF_ramNY-oh-0X+ayA@mail.gmail.com/ Signed-off-by: Danilo Krummrich Reviewed-by: Tamir Duberstein Link: https://patch.msgid.link/20251223115949.32531-1-dakr@kernel.org Signed-off-by: Alice Ryhl --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 852281f1cc39..bf060416c3bc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2158,7 +2158,7 @@ M: Alice Ryhl L: dri-devel@lists.freedesktop.org S: Supported W: https://rust-for-linux.com/tyr-gpu-driver -W https://drm.pages.freedesktop.org/maintainer-tools/drm-rust.html +W: https://drm.pages.freedesktop.org/maintainer-tools/drm-rust.html B: https://gitlab.freedesktop.org/panfrost/linux/-/issues T: git https://gitlab.freedesktop.org/drm/rust/kernel.git F: Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml From 97872fa28b33a1ca6acc0a7b260750c9a123b193 Mon Sep 17 00:00:00 2001 From: Danilo Krummrich Date: Tue, 23 Dec 2025 13:04:34 +0100 Subject: [PATCH 056/283] MAINTAINERS: exclude the tyr driver from DRM MISC The ARM MALI TYR DRM DRIVER is already maintained through the drm-rust tree, hence exclude it from drm-misc. Fixes: cf4fd52e3236 ("rust: drm: Introduce the Tyr driver for Arm Mali GPUs") Signed-off-by: Danilo Krummrich Link: https://patch.msgid.link/20251223120436.33233-1-dakr@kernel.org Signed-off-by: Alice Ryhl --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index bf060416c3bc..684c2047e46b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8357,6 +8357,7 @@ X: drivers/gpu/drm/msm/ X: drivers/gpu/drm/nova/ X: drivers/gpu/drm/radeon/ X: drivers/gpu/drm/tegra/ +X: drivers/gpu/drm/tyr/ X: drivers/gpu/drm/xe/ DRM DRIVERS AND COMMON INFRASTRUCTURE [RUST] From fa917d3d570279dc3d699cbd947d0da0fde2e402 Mon Sep 17 00:00:00 2001 From: Louis-Alexis Eyraud Date: Wed, 3 Dec 2025 12:32:42 +0100 Subject: [PATCH 057/283] pinctrl: mediatek: mt8189: restore previous register base name array order In mt8189-pinctrl driver, a previous commit changed the register base name array (mt8189_pinctrl_register_base_names) entry name and order to align it with the same name and order as the "mediatek,mt8189-pinctrl" devicetree bindings. The new order (by ascending register address) now causes an issue with MT8189 pinctrl configuration. MT8189 SoC has multiple base addresses for the pin configuration registers. Several constant data structures, declaring each pin configuration, are using PIN_FIELD_BASE() macro which i_base parameter indicates for a given pin the lookup index in the base register address array of the driver internal data for the configuration register read/write accesses. But in practice, this parameter is given a hardcoded numerical value that corresponds to the expected base register entry index in mt8189_pinctrl_register_base_names array. Since this array reordering, the i_base index matching is no more correct. So, in order to avoid modifying over a thousand of PIN_FIELD_BASE() calls, restore previous mt8189_pinctrl_register_base_names entry order. Fixes: 518919276c41 ("pinctrl: mediatek: mt8189: align register base names to dt-bindings ones") Signed-off-by: Louis-Alexis Eyraud Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-mt8189.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8189.c b/drivers/pinctrl/mediatek/pinctrl-mt8189.c index f6a3e584588b..cd4cdff309a1 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt8189.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt8189.c @@ -1642,7 +1642,7 @@ static const struct mtk_pin_reg_calc mt8189_reg_cals[PINCTRL_PIN_REG_MAX] = { }; static const char * const mt8189_pinctrl_register_base_names[] = { - "base", "lm", "rb0", "rb1", "bm0", "bm1", "bm2", "lt0", "lt1", "rt", + "base", "bm0", "bm1", "bm2", "lm", "lt0", "lt1", "rb0", "rb1", "rt", }; static const struct mtk_eint_hw mt8189_eint_hw = { From 961ac9d97be72267255f1ed841aabf6694b17454 Mon Sep 17 00:00:00 2001 From: Harshita Bhilwaria Date: Wed, 17 Dec 2025 11:16:06 +0530 Subject: [PATCH 058/283] crypto: qat - fix duplicate restarting msg during AER error The restarting message from PF to VF is sent twice during AER error handling: once from adf_error_detected() and again from adf_disable_sriov(). This causes userspace subservices to shutdown unexpectedly when they receive a duplicate restarting message after already being restarted. Avoid calling adf_pf2vf_notify_restarting() and adf_pf2vf_wait_for_restarting_complete() from adf_error_detected() so that the restarting msg is sent only once from PF to VF. Fixes: 9567d3dc760931 ("crypto: qat - improve aer error reset handling") Signed-off-by: Harshita Bhilwaria Reviewed-by: Giovanni Cabiddu Reviewed-by: Ahsan Atta Reviewed-by: Ravikumar PM Reviewed-by: Srikanth Thokala Signed-off-by: Herbert Xu --- drivers/crypto/intel/qat/qat_common/adf_aer.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/crypto/intel/qat/qat_common/adf_aer.c b/drivers/crypto/intel/qat/qat_common/adf_aer.c index 11728cf32653..a5964fd8204c 100644 --- a/drivers/crypto/intel/qat/qat_common/adf_aer.c +++ b/drivers/crypto/intel/qat/qat_common/adf_aer.c @@ -41,8 +41,6 @@ static pci_ers_result_t adf_error_detected(struct pci_dev *pdev, adf_error_notifier(accel_dev); adf_pf2vf_notify_fatal_error(accel_dev); adf_dev_restarting_notify(accel_dev); - adf_pf2vf_notify_restarting(accel_dev); - adf_pf2vf_wait_for_restarting_complete(accel_dev); pci_clear_master(pdev); adf_dev_down(accel_dev); From cd0caaf2005547eaef8170356939aaabfcad4837 Mon Sep 17 00:00:00 2001 From: Carlos Song Date: Tue, 18 Nov 2025 14:28:54 +0800 Subject: [PATCH 059/283] arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP I3C2 is in WAKEUP domain. Its pclk should be IMX95_CLK_BUSWAKEUP. Fixes: 969497ebefcf ("arm64: dts: imx95: Add i3c1 and i3c2") Signed-off-by: Carlos Song Cc: stable@vger.kernel.org Reviewed-by: Frank Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx95.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi index e45014d50abe..a4d854817559 100644 --- a/arch/arm64/boot/dts/freescale/imx95.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi @@ -828,7 +828,7 @@ interrupts = ; #address-cells = <3>; #size-cells = <0>; - clocks = <&scmi_clk IMX95_CLK_BUSAON>, + clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&scmi_clk IMX95_CLK_I3C2SLOW>; clock-names = "pclk", "fast_clk"; status = "disabled"; From 1a8e81a3bcd1995e86ae5d3b7801a5f3eba0dd04 Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Tue, 18 Nov 2025 15:35:50 -0600 Subject: [PATCH 060/283] ARM: dts: nxp: imx: Fix mc13xxx LED node names Node names are supposed to be generic and use hexadecimal unit-addresses. Signed-off-by: Rob Herring (Arm) Reviewed-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo --- arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts | 8 ++++---- arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts | 4 ++-- arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts | 4 ++-- arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts | 4 ++-- 4 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts index b8048e12e3d9..5398e9067e60 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts @@ -248,14 +248,14 @@ linux,default-trigger = "nand-disk"; }; - ledg3: led@10 { - reg = <10>; + ledg3: led@a { + reg = <0xa>; label = "system:green3:live"; linux,default-trigger = "heartbeat"; }; - ledb3: led@11 { - reg = <11>; + ledb3: led@b { + reg = <0xb>; label = "system:blue3:cpu"; linux,default-trigger = "cpu0"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts index 43ff5eafb2bb..91c63d1f2604 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-rdu1.dts @@ -398,13 +398,13 @@ #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled0@3 { + led@3 { reg = <3>; label = "system:green:status"; linux,default-trigger = "default-on"; }; - sysled1@4 { + led@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts index 26eb7a9506e4..1598bf4f4991 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu2-mezz.dts @@ -225,13 +225,13 @@ #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled3: led3@3 { + sysled3: led@3 { reg = <3>; label = "system:red:power"; linux,default-trigger = "default-on"; }; - sysled4: led4@4 { + sysled4: led@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts index 19a3b142c964..c2dcfd44c445 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-zii-scu3-esb.dts @@ -153,13 +153,13 @@ #size-cells = <0>; led-control = <0x0 0x0 0x3f83f8 0x0>; - sysled3: led3@3 { + sysled3: led@3 { reg = <3>; label = "system:red:power"; linux,default-trigger = "default-on"; }; - sysled4: led4@4 { + sysled4: led@4 { reg = <4>; label = "system:green:act"; linux,default-trigger = "heartbeat"; From e0d8678c2f09dca22e6197321f223fa9a0ca2839 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Wed, 19 Nov 2025 11:22:39 +0800 Subject: [PATCH 061/283] arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level light sensor isl29023 share the interrupt with lsm303arg, but these two devices use different interrupt type. According to the datasheet of these two devides, both support low level trigger type, so correct the interrupt type here to avoid the following error log: irq: type mismatch, failed to map hwirq-11 for gpio@5d0c0000! Fixes: 9918092cbb0e ("arm64: dts: imx8qm-mek: add i2c0 and children devices") Fixes: 1d8a9f043a77 ("arm64: dts: imx8: use defines for interrupts") Signed-off-by: Haibo Chen Reviewed-by: Frank Li Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 779d9f78fb81..667ba2fea867 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -576,7 +576,7 @@ compatible = "isil,isl29023"; reg = <0x44>; interrupt-parent = <&lsio_gpio4>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; }; pressure-sensor@60 { From ca643894a37a25713029b36cfe7d1bae515cac08 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Wed, 19 Nov 2025 11:22:40 +0800 Subject: [PATCH 062/283] arm64: dts: add off-on-delay-us for usdhc2 regulator For SD card, according to the spec requirement, for sd card power reset operation, it need sd card supply voltage to be lower than 0.5v and keep over 1ms, otherwise, next time power back the sd card supply voltage to 3.3v, sd card can't support SD3.0 mode again. To match such requirement on imx8qm-mek board, add 4.8ms delay between sd power off and power on. Fixes: 307fd14d4b14 ("arm64: dts: imx: add imx8qm mek support") Reviewed-by: Frank Li Signed-off-by: Haibo Chen Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 667ba2fea867..f1b0563d3a09 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -263,6 +263,7 @@ regulator-max-microvolt = <3000000>; gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>; enable-active-high; + off-on-delay-us = <4800>; }; reg_audio: regulator-audio { From 420f423defcf6d0af2263d38da870ca4a20c0990 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Mon, 15 Dec 2025 12:59:15 +0200 Subject: [PATCH 063/283] mei: me: add nova lake point S DID Add Nova Lake S device id. Cc: stable Co-developed-by: Tomas Winkler Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Link: https://patch.msgid.link/20251215105915.1672659-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/hw-me-regs.h | 2 ++ drivers/misc/mei/pci-me.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index a4f75dc36929..fa30899a5fa2 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -122,6 +122,8 @@ #define MEI_DEV_ID_WCL_P 0x4D70 /* Wildcat Lake P */ +#define MEI_DEV_ID_NVL_S 0x6E68 /* Nova Lake Point S */ + /* * MEI HW Section */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 73cad914be9f..2a6e569558b9 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -129,6 +129,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_WCL_P, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_NVL_S, MEI_ME_PCH15_CFG)}, + /* required last entry */ {0, } }; From 361e0ff456a8daf9753c18030533256e4133ce7a Mon Sep 17 00:00:00 2001 From: Alice Ryhl Date: Tue, 2 Dec 2025 11:24:24 +0000 Subject: [PATCH 064/283] rust_binder: remove spin_lock() in rust_shrink_free_page() When forward-porting Rust Binder to 6.18, I neglected to take commit fb56fdf8b9a2 ("mm/list_lru: split the lock to per-cgroup scope") into account, and apparently I did not end up running the shrinker callback when I sanity tested the driver before submission. This leads to crashes like the following: ============================================ WARNING: possible recursive locking detected 6.18.0-mainline-maybe-dirty #1 Tainted: G IO -------------------------------------------- kswapd0/68 is trying to acquire lock: ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: lock_list_lru_of_memcg+0x128/0x230 but task is already holding lock: ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: rust_helper_spin_lock+0xd/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&l->lock); lock(&l->lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kswapd0/68: #0: ffffffff90d2e260 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x597/0x1160 #1: ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: rust_helper_spin_lock+0xd/0x20 #2: ffffffff90cf3680 (rcu_read_lock){....}-{1:2}, at: lock_list_lru_of_memcg+0x2d/0x230 To fix this, remove the spin_lock() call from rust_shrink_free_page(). Cc: stable Fixes: eafedbc7c050 ("rust_binder: add Rust Binder driver") Signed-off-by: Alice Ryhl Link: https://patch.msgid.link/20251202-binder-shrink-unspin-v1-1-263efb9ad625@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder/page_range.rs | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/android/binder/page_range.rs b/drivers/android/binder/page_range.rs index 9379038f61f5..fdd97112ef5c 100644 --- a/drivers/android/binder/page_range.rs +++ b/drivers/android/binder/page_range.rs @@ -727,8 +727,5 @@ unsafe extern "C" fn rust_shrink_free_page( drop(mm); drop(page); - // SAFETY: We just unlocked the lru lock, but it should be locked when we return. - unsafe { bindings::spin_lock(&raw mut (*lru).lock) }; - LRU_REMOVED_ENTRY } From 2f4ca87469b9499eb9218cf2a374018cfee6b649 Mon Sep 17 00:00:00 2001 From: Matthew Maurer Date: Fri, 26 Dec 2025 20:17:08 +0000 Subject: [PATCH 065/283] docs: ABI: sysfs-devices-soc: Fix swapped sample values The sample values for `family` and `machine` were swapped relative to what the driver actually does, and doesn't match the field description. Fixes: da5a70f3519f ("Documentation: add information for new sysfs soc bus functionality") Reviewed-by: Lee Jones Signed-off-by: Matthew Maurer Link: https://patch.msgid.link/20251226-soc-bindings-v4-2-2c2fac08f820@google.com Signed-off-by: Danilo Krummrich --- Documentation/ABI/testing/sysfs-devices-soc | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc index 5269808ec35f..cb6776a4afe0 100644 --- a/Documentation/ABI/testing/sysfs-devices-soc +++ b/Documentation/ABI/testing/sysfs-devices-soc @@ -17,14 +17,14 @@ Date: January 2012 contact: Lee Jones Description: Read-only attribute common to all SoCs. Contains the SoC machine - name (e.g. Ux500). + name (e.g. DB8500). What: /sys/devices/socX/family Date: January 2012 contact: Lee Jones Description: Read-only attribute common to all SoCs. Contains SoC family name - (e.g. DB8500). + (e.g. ux500). On many of ARM based silicon with SMCCC v1.2+ compliant firmware this will contain the JEDEC JEP106 manufacturer’s identification From 68ece1e2ce3a1cb0aac9f5af685cf18fa2fa31aa Mon Sep 17 00:00:00 2001 From: Yilin Chen <1479826151@qq.com> Date: Mon, 29 Dec 2025 00:52:34 +0800 Subject: [PATCH 066/283] rust: dma: remove incorrect safety documentation Removes a safety requirement that incorrectly states callers must ensure the device does not access memory while the returned slice is live, as this method doesn't return a slice. Fixes: d37a39f607c4 ("rust: dma: add as_slice/write functions for CoherentAllocation") Signed-off-by: Yilin Chen <1479826151@qq.com> Link: https://patch.msgid.link/tencent_5195C0324923A2B67DEF8AE4B8E139BCB105@qq.com Signed-off-by: Danilo Krummrich --- rust/kernel/dma.rs | 2 -- 1 file changed, 2 deletions(-) diff --git a/rust/kernel/dma.rs b/rust/kernel/dma.rs index 84d3c67269e8..2ac107d8f7b7 100644 --- a/rust/kernel/dma.rs +++ b/rust/kernel/dma.rs @@ -532,8 +532,6 @@ impl CoherentAllocation { /// /// # Safety /// - /// * Callers must ensure that the device does not read/write to/from memory while the returned - /// slice is live. /// * Callers must ensure that this call does not race with a read or write to the same region /// that overlaps with this write. /// From 3691fd19ccad4c1c0e3fc4888ef36edaa6e571be Mon Sep 17 00:00:00 2001 From: Yilin Chen <1479826151@qq.com> Date: Mon, 29 Dec 2025 00:53:44 +0800 Subject: [PATCH 067/283] rust: device_id: replace incorrect word in safety documentation The safety documentation incorrectly refers to `RawDeviceId` when transmuting to `RawType`. This fixes the documentation to correctly indicate that implementers must ensure layout compatibility with `RawType`, not `RawDeviceId`. Fixes: 9b90864bb42b ("rust: implement `IdArray`, `IdTable` and `RawDeviceId`") Signed-off-by: Yilin Chen <1479826151@qq.com> Link: https://patch.msgid.link/tencent_C18DD5047749311142ED455779C7CCCF3A08@qq.com Signed-off-by: Danilo Krummrich --- rust/kernel/device_id.rs | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/rust/kernel/device_id.rs b/rust/kernel/device_id.rs index 62c42da12e9d..8e9721446014 100644 --- a/rust/kernel/device_id.rs +++ b/rust/kernel/device_id.rs @@ -15,7 +15,7 @@ use core::mem::MaybeUninit; /// # Safety /// /// Implementers must ensure that `Self` is layout-compatible with [`RawDeviceId::RawType`]; -/// i.e. it's safe to transmute to `RawDeviceId`. +/// i.e. it's safe to transmute to `RawType`. /// /// This requirement is needed so `IdArray::new` can convert `Self` to `RawType` when building /// the ID table. From 466798368e51d0a8fb9628730399957ec2281824 Mon Sep 17 00:00:00 2001 From: Vitor Soares Date: Fri, 28 Nov 2025 15:00:27 +0000 Subject: [PATCH 068/283] arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt Change the PHY interrupt trigger type from IRQ_TYPE_LEVEL_LOW to IRQ_TYPE_EDGE_FALLING to match the PCA9745 GPIO expander hardware capabilities and avoid emulated level detection. Fixes: 90bbe88e0ea6 ("arm64: dts: freescale: add Toradex SMARC iMX95") Signed-off-by: Vitor Soares Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi index afbdadcb3686..2cbd5606cb19 100644 --- a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi @@ -582,7 +582,7 @@ ethphy1: ethernet-phy@1 { reg = <1>; interrupt-parent = <&som_gpio_expander_1>; - interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; ti,rx-internal-delay = ; ti,tx-internal-delay = ; }; From 15599306fb6c38c834fa0266bf71557c9be4fb12 Mon Sep 17 00:00:00 2001 From: Vitor Soares Date: Fri, 28 Nov 2025 15:00:28 +0000 Subject: [PATCH 069/283] arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position Fix the SMARC_SDIO_WP gpio-line-name position. It should be on line 15 of som_gpio_expander_1, not line 17. Fixes: 90bbe88e0ea6 ("arm64: dts: freescale: add Toradex SMARC iMX95") Signed-off-by: Vitor Soares Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi index 2cbd5606cb19..115a16e44a99 100644 --- a/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi +++ b/arch/arm64/boot/dts/freescale/imx95-toradex-smarc.dtsi @@ -406,8 +406,6 @@ "", "", "", - "", - "", "SMARC_SDIO_WP"; }; From 4f4f6b4467e63317ec3fd0a5b7405757ad55c169 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Sun, 28 Dec 2025 22:03:49 -0800 Subject: [PATCH 070/283] MAINTAINERS: Update Saravana Kannan's email address I've switched employers. Updating email address to be employer-agnostic and remain reachable. Also updating mailmap so all my previous emails map to this new one. Signed-off-by: Saravana Kannan Link: https://patch.msgid.link/20251229060350.852-1-saravanak@kernel.org Signed-off-by: Rob Herring (Arm) --- .mailmap | 2 ++ MAINTAINERS | 6 +++--- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/.mailmap b/.mailmap index 84309a39d329..db02c617fb30 100644 --- a/.mailmap +++ b/.mailmap @@ -704,6 +704,8 @@ Sankeerth Billakanti Santosh Shilimkar Santosh Shilimkar Sarangdhar Joshi +Saravana Kannan +Saravana Kannan Sascha Hauer Sahitya Tummala Sathishkumar Muruganandam diff --git a/MAINTAINERS b/MAINTAINERS index 5b11839cba9d..b21ca954408e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6532,7 +6532,7 @@ F: rust/kernel/cpufreq.rs F: tools/testing/selftests/cpufreq/ CPU FREQUENCY DRIVERS - VIRTUAL MACHINE CPUFREQ -M: Saravana Kannan +M: Saravana Kannan L: linux-pm@vger.kernel.org S: Maintained F: drivers/cpufreq/virtual-cpufreq.c @@ -7170,7 +7170,7 @@ F: drivers/base/devcoredump.c F: include/linux/devcoredump.h DEVICE DEPENDENCY HELPER SCRIPT -M: Saravana Kannan +M: Saravana Kannan L: linux-kernel@vger.kernel.org S: Maintained F: scripts/dev-needs.sh @@ -19544,7 +19544,7 @@ F: include/linux/oa_tc6.h OPEN FIRMWARE AND FLATTENED DEVICE TREE M: Rob Herring -M: Saravana Kannan +M: Saravana Kannan L: devicetree@vger.kernel.org S: Maintained Q: http://patchwork.kernel.org/project/devicetree/list/ From e6a4eedd49ce27c16a80506c66a04707e0ee0116 Mon Sep 17 00:00:00 2001 From: Ian Ray Date: Mon, 1 Dec 2025 11:56:05 +0200 Subject: [PATCH 071/283] ARM: dts: imx6q-ba16: fix RTC interrupt level RTC interrupt level should be set to "LOW". This was revealed by the introduction of commit: f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode") which changed the way IRQ type is obtained. Fixes: 56c27310c1b4 ("ARM: dts: imx: Add Advantech BA-16 Qseven module") Signed-off-by: Ian Ray Signed-off-by: Shawn Guo --- arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi index 53013b12c2ec..02d66523668d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi @@ -337,7 +337,7 @@ pinctrl-0 = <&pinctrl_rtc>; reg = <0x32>; interrupt-parent = <&gpio4>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; }; }; From 1815b16d02ae471b80d7f88c8c62d3b02c18f42a Mon Sep 17 00:00:00 2001 From: Maud Spierings Date: Mon, 1 Dec 2025 12:56:50 +0100 Subject: [PATCH 072/283] dt-bindings: arm: fsl: moduline-display: fix compatible The compatibles should include the SoM compatible, this board is based on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the bootloader which uses upstream Linux devicetrees as a base. Also add the hardware revision to the board compatible to handle revision specific quirks in the bootloader/userspace. This is a breaking change, but it is early enough that it can be corrected without causing any issues. Fixes: 24e67d28ef95 ("dt-bindings: arm: fsl: Add GOcontroll Moduline Display") Signed-off-by: Maud Spierings Reviewed-by: Krzysztof Kozlowski Signed-off-by: Shawn Guo --- Documentation/devicetree/bindings/arm/fsl.yaml | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 68a2d5fecc43..336669e16d7a 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -1105,7 +1105,6 @@ properties: - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - gateworks,imx8mp-gw75xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw82xx-2x # i.MX8MP Gateworks Board - - gocontroll,moduline-display # GOcontroll Moduline Display controller - prt,prt8ml # Protonic PRT8ML - skov,imx8mp-skov-basic # SKOV i.MX8MP baseboard without frontplate - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel @@ -1164,6 +1163,14 @@ properties: - const: engicam,icore-mx8mp # i.MX8MP Engicam i.Core MX8M Plus SoM - const: fsl,imx8mp + - description: Ka-Ro TX8P-ML81 SoM based boards + items: + - enum: + - gocontroll,moduline-display + - gocontroll,moduline-display-106 + - const: karo,tx8p-ml81 + - const: fsl,imx8mp + - description: Kontron i.MX8MP OSM-S SoM based Boards items: - const: kontron,imx8mp-bl-osm-s # Kontron BL i.MX8MP OSM-S Board From 056c68875122dd342782e5956ed145fe9e059614 Mon Sep 17 00:00:00 2001 From: Maud Spierings Date: Mon, 1 Dec 2025 12:56:51 +0100 Subject: [PATCH 073/283] arm64: dts: freescale: moduline-display: fix compatible The compatibles should include the SoM compatible, this board is based on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the bootloader which uses upstream Linux devicetrees as a base. Also add the hardware revision to the board compatible to handle revision specific quirks in the bootloader/userspace. This is a breaking change, but it is early enough that it can be corrected without causing any issues. Fixes: 03f07be54cdc ("arm64: dts: freescale: Add the GOcontroll Moduline Display baseboard") Signed-off-by: Maud Spierings Signed-off-by: Shawn Guo --- .../dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts index 88ad422c2760..399230144ce3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts @@ -9,7 +9,7 @@ #include "imx8mp-tx8p-ml81.dtsi" / { - compatible = "gocontroll,moduline-display", "fsl,imx8mp"; + compatible = "gocontroll,moduline-display-106", "karo,tx8p-ml81", "fsl,imx8mp"; chassis-type = "embedded"; hardware = "Moduline Display V1.06"; model = "GOcontroll Moduline Display baseboard"; From cdf4e631eec5ddd49bb625df9fb144d6ecdd6f15 Mon Sep 17 00:00:00 2001 From: Maud Spierings Date: Mon, 1 Dec 2025 12:56:52 +0100 Subject: [PATCH 074/283] arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells On this SoM eqos is the primary ethernet interface, Ka-Ro fuses the address for it in eth_mac1, eth_mac2 seems to be left unfused. In their downstream u-boot they fetch it from eth_mac1 [1][2], by setting alias of eqos to ethernet0, the driver then fetches the mac address based on the alias number. Set eqos to read from eth_mac1 instead of eth_mac2. Also set fec to point at eth_mac2 as it may be fused later even though it is disabled by default. With this changed barebox is now capable of loading the correct address. Link: https://github.com/karo-electronics/karo-tx-uboot/blob/380543278410bbf04264d80a3bfbe340b8e62439/drivers/net/dwc_eth_qos.c#L1167 [1] Link: https://github.com/karo-electronics/karo-tx-uboot/blob/380543278410bbf04264d80a3bfbe340b8e62439/arch/arm/dts/imx8mp-karo.dtsi#L12 [2] Fixes: bac63d7c5f46 ("arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM") Signed-off-by: Maud Spierings Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi index fe8ba16eb40e..761ee046eb72 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81.dtsi @@ -47,6 +47,7 @@ <&clk IMX8MP_SYS_PLL2_100M>, <&clk IMX8MP_SYS_PLL2_50M>; assigned-clock-rates = <266000000>, <100000000>, <50000000>; + nvmem-cells = <ð_mac1>; phy-handle = <ðphy0>; phy-mode = "rmii"; pinctrl-0 = <&pinctrl_eqos>; @@ -75,6 +76,10 @@ }; }; +&fec { + nvmem-cells = <ð_mac2>; +}; + &gpio1 { gpio-line-names = "SODIMM_152", "SODIMM_42", From c63749a7ddc59ac6ec0b05abfa0a21af9f2c1d38 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 2 Dec 2025 14:41:51 +0100 Subject: [PATCH 075/283] arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM Add missing 'clocks' property to LAN8740Ai PHY node, to allow the PHY driver to manage LAN8740Ai CLKIN reference clock supply. This fixes sporadic link bouncing caused by interruptions on the PHY reference clock, by letting the PHY driver manage the reference clock and assure there are no interruptions. This follows the matching PHY driver recommendation described in commit bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support") Fixes: 8d6712695bc8 ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2") Signed-off-by: Marek Vasut Tested-by: Christoph Niedermaier Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index 68c2e0156a5c..f8303b7e2bd2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -113,6 +113,7 @@ ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */ compatible = "ethernet-phy-id0007.c110", "ethernet-phy-ieee802.3-c22"; + clocks = <&clk IMX8MP_CLK_ENET_QOS>; interrupt-parent = <&gpio3>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&pinctrl_ethphy0>; From a988caeed9d918452aa0a68de2c6e94d86aa43ba Mon Sep 17 00:00:00 2001 From: Sherry Sun Date: Wed, 3 Dec 2025 09:59:56 +0800 Subject: [PATCH 076/283] arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart The commit 616effc0272b5 ("arm64: dts: imx8: Fix lpuart DMA channel order") swap uart rx and tx channel at common imx8-ss-dma.dtsi. But miss update imx8qm-ss-dma.dtsi. The commit 5a8e9b022e569 ("arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names") just simple add dma-names as binding doc requirement. Correct lpuart0 - lpuart3 dma rx and tx channels, and use defines for the FSL_EDMA_RX flag. Fixes: 5a8e9b022e56 ("arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names") Signed-off-by: Sherry Sun Reviewed-by: Frank Li Reviewed-by: Alexander Stein Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index 5f24850bf322..974e193f8dcb 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -172,25 +172,25 @@ &lpuart0 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; - dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; + dmas = <&edma2 12 0 FSL_EDMA_RX>, <&edma2 13 0 0>; dma-names = "rx","tx"; }; &lpuart1 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; - dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; + dmas = <&edma2 14 0 FSL_EDMA_RX>, <&edma2 15 0 0>; dma-names = "rx","tx"; }; &lpuart2 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; - dmas = <&edma2 17 0 0>, <&edma2 16 0 1>; + dmas = <&edma2 16 0 FSL_EDMA_RX>, <&edma2 17 0 0>; dma-names = "rx","tx"; }; &lpuart3 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; - dmas = <&edma2 19 0 0>, <&edma2 18 0 1>; + dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 19 0 0>; dma-names = "rx","tx"; }; From 89e87d0dc87eb3654c9ae01afc4a18c1c6d1e523 Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Tue, 16 Dec 2025 14:15:28 +0100 Subject: [PATCH 077/283] arm64: dts: mba8mx: Fix Ethernet PHY IRQ support Ethernet PHY interrupt mode is level triggered. Adjust the mode accordingly. Signed-off-by: Alexander Stein Reviewed-by: Andrew Lunn Fixes: 70cf622bb16e ("arm64: dts: mba8mx: Add Ethernet PHY IRQ support") Signed-off-by: Shawn Guo --- arch/arm64/boot/dts/freescale/mba8mx.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index 225cd2f1220b..10d5c211b1c9 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -192,7 +192,7 @@ reset-assert-us = <500000>; reset-deassert-us = <500>; interrupt-parent = <&expander2>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; }; }; }; From 0cc13256b60510936c34098ee7b929098eed823b Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Wed, 26 Nov 2025 13:47:18 +0530 Subject: [PATCH 078/283] PCI: qcom: Remove ASPM L0s support for MSM8996 SoC Though I couldn't confirm ASPM L0s support with the Qcom hardware team, a bug report from Dmitry suggests that L0s is broken on this legacy SoC. Hence, remove L0s support from the Root Port Link Capabilities in this SoC. Since qcom_pcie_clear_aspm_l0s() is now used by more than one SoC config, call it from qcom_pcie_host_init() instead. Reported-by: Dmitry Baryshkov Closes: https://lore.kernel.org/linux-pci/4cp5pzmlkkht2ni7us6p3edidnk25l45xrp6w3fxguqcvhq2id@wjqqrdpkypkf Signed-off-by: Manivannan Sadhasivam Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Tested-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20251126081718.8239-1-mani@kernel.org --- drivers/pci/controller/dwc/pcie-qcom.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 7b92e7a1c0d9..5a318487b2b3 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -1047,7 +1047,6 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie) writel(WR_NO_SNOOP_OVERRIDE_EN | RD_NO_SNOOP_OVERRIDE_EN, pcie->parf + PARF_NO_SNOOP_OVERRIDE); - qcom_pcie_clear_aspm_l0s(pcie->pci); qcom_pcie_clear_hpc(pcie->pci); return 0; @@ -1316,6 +1315,8 @@ static int qcom_pcie_host_init(struct dw_pcie_rp *pp) goto err_disable_phy; } + qcom_pcie_clear_aspm_l0s(pcie->pci); + qcom_ep_reset_deassert(pcie); if (pcie->cfg->ops->config_sid) { @@ -1464,6 +1465,7 @@ static const struct qcom_pcie_cfg cfg_2_1_0 = { static const struct qcom_pcie_cfg cfg_2_3_2 = { .ops = &ops_2_3_2, + .no_l0s = true, }; static const struct qcom_pcie_cfg cfg_2_3_3 = { From 4c9f6a782f6078dc94450fcb22e65d520bfa0775 Mon Sep 17 00:00:00 2001 From: Alice Ryhl Date: Sat, 27 Dec 2025 15:47:21 +0000 Subject: [PATCH 079/283] rust: driver: fix broken intra-doc links to example driver types The `auxiliary` and `pci` modules are conditional on `CONFIG_AUXILIARY_BUS` and `CONFIG_PCI` respectively. When these are disabled, the intra-doc links to `auxiliary::Driver` and `pci::Driver` break, causing rustdoc warnings (or errors with `-D warnings`). error: unresolved link to `kernel::auxiliary::Driver` --> rust/kernel/driver.rs:82:28 | 82 | //! [`auxiliary::Driver`]: kernel::auxiliary::Driver | ^^^^^^^^^^^^^^^^^^^^^^^^^ no item named `auxiliary` in module `kernel` Fix this by making the documentation for these examples conditional on the corresponding configuration options. Fixes: 970a7c68788e ("driver: rust: expand documentation for driver infrastructure") Signed-off-by: Alice Ryhl Reported-by: FUJITA Tomonori Closes: https://lore.kernel.org/rust-for-linux/20251209.151817.744108529426448097.fujita.tomonori@gmail.com/ Link: https://patch.msgid.link/20251227-driver-types-v1-1-1916154fbe5e@google.com Signed-off-by: Danilo Krummrich --- rust/kernel/driver.rs | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/rust/kernel/driver.rs b/rust/kernel/driver.rs index 9beae2e3d57e..649d06468f41 100644 --- a/rust/kernel/driver.rs +++ b/rust/kernel/driver.rs @@ -33,7 +33,14 @@ //! } //! ``` //! -//! For specific examples see [`auxiliary::Driver`], [`pci::Driver`] and [`platform::Driver`]. +//! For specific examples see: +//! +//! * [`platform::Driver`](kernel::platform::Driver) +#![cfg_attr( + CONFIG_AUXILIARY_BUS, + doc = "* [`auxiliary::Driver`](kernel::auxiliary::Driver)" +)] +#![cfg_attr(CONFIG_PCI, doc = "* [`pci::Driver`](kernel::pci::Driver)")] //! //! The `probe()` callback should return a `impl PinInit`, i.e. the driver's private //! data. The bus abstraction should store the pointer in the corresponding bus device. The generic @@ -79,7 +86,6 @@ //! //! For this purpose the generic infrastructure in [`device_id`] should be used. //! -//! [`auxiliary::Driver`]: kernel::auxiliary::Driver //! [`Core`]: device::Core //! [`Device`]: device::Device //! [`Device`]: device::Device @@ -87,8 +93,6 @@ //! [`DeviceContext`]: device::DeviceContext //! [`device_id`]: kernel::device_id //! [`module_driver`]: kernel::module_driver -//! [`pci::Driver`]: kernel::pci::Driver -//! [`platform::Driver`]: kernel::platform::Driver use crate::error::{Error, Result}; use crate::{acpi, device, of, str::CStr, try_pin_init, types::Opaque, ThisModule}; From 66562b66dcbc8f93c1e28632299f449bb2f5c47d Mon Sep 17 00:00:00 2001 From: Vivian Wang Date: Tue, 30 Dec 2025 21:39:17 +0800 Subject: [PATCH 080/283] riscv: boot: Always make Image from vmlinux, not vmlinux.unstripped Since commit 4b47a3aefb29 ("kbuild: Restore pattern to avoid stripping .rela.dyn from vmlinux") vmlinux has .rel*.dyn preserved. Therefore, use vmlinux to produce Image, not vmlinux.unstripped. Doing so fixes booting a RELOCATABLE=y Image with kexec. The problem is caused by this chain of events: - Since commit 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped"), vmlinux.unstripped gets a .modinfo section. - The .modinfo section has SHF_ALLOC, so it ends up in Image, at the end of it. - The Image header's image_size field does not expect to include .modinfo and does not account for it, since it should not be in Image. - If .modinfo is large enough, the file size of Image ends up larger than image_size, which eventually leads to it failing sanity_check_segment_list(). Using vmlinux instead of vmlinux.unstripped means that the unexpected .modinfo section is gone from Image, fixing the file size problem. Cc: stable@vger.kernel.org Fixes: 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped") Signed-off-by: Vivian Wang Reviewed-by: Nathan Chancellor Tested-by: Han Gao Link: https://patch.msgid.link/20251230-riscv-vmlinux-not-unstripped-v1-1-15f49df880df@iscas.ac.cn Signed-off-by: Paul Walmsley --- arch/riscv/boot/Makefile | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile index bfc3d0b75b9b..5301adf5f3f5 100644 --- a/arch/riscv/boot/Makefile +++ b/arch/riscv/boot/Makefile @@ -31,11 +31,7 @@ $(obj)/xipImage: vmlinux FORCE endif -ifdef CONFIG_RELOCATABLE -$(obj)/Image: vmlinux.unstripped FORCE -else $(obj)/Image: vmlinux FORCE -endif $(call if_changed,objcopy) $(obj)/Image.gz: $(obj)/Image FORCE From 25fd7ee7bf58ac3ec7be3c9f82ceff153451946c Mon Sep 17 00:00:00 2001 From: Lukas Gerlach Date: Thu, 18 Dec 2025 20:13:32 +0100 Subject: [PATCH 081/283] riscv: Sanitize syscall table indexing under speculation The syscall number is a user-controlled value used to index into the syscall table. Use array_index_nospec() to clamp this value after the bounds check to prevent speculative out-of-bounds access and subsequent data leakage via cache side channels. Signed-off-by: Lukas Gerlach Link: https://patch.msgid.link/20251218191332.35849-3-lukas.gerlach@cispa.de Signed-off-by: Paul Walmsley --- arch/riscv/kernel/traps.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c index 80230de167de..47afea4ff1a8 100644 --- a/arch/riscv/kernel/traps.c +++ b/arch/riscv/kernel/traps.c @@ -339,8 +339,10 @@ void do_trap_ecall_u(struct pt_regs *regs) add_random_kstack_offset(); - if (syscall >= 0 && syscall < NR_syscalls) + if (syscall >= 0 && syscall < NR_syscalls) { + syscall = array_index_nospec(syscall, NR_syscalls); syscall_handler(regs, syscall); + } /* * Ultimately, this value will get limited by KSTACK_OFFSET_MAX(), From 641ecc890038f08af160bdff5183b6b42d2313b5 Mon Sep 17 00:00:00 2001 From: Jiakai Xu Date: Fri, 26 Dec 2025 03:23:17 +0000 Subject: [PATCH 082/283] riscv: fix KUnit test_kprobes crash when building with Clang MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Clang misinterprets the placement of test_kprobes_addresses and test_kprobes_functions arrays when they are not explicitly assigned to a data section. This can lead to kmalloc_array() allocation errors and KUnit failures. When testing the Clang-compiled code in QEMU, this warning was emitted: WARNING: CPU: 1 PID: 3000 at mm/page_alloc.c:5159 __alloc_frozen_pages_noprof+0xe6/0x2fc mm/page_alloc.c:5159 Further investigation revealed that the test_kprobes_addresses array appeared to have over 100,000 elements, including invalid addresses; whereas, according to test-kprobes-asm.S, test_kprobes_addresses should only have 25 elements. When compiling the kernel with GCC, the kernel boots correctly. This patch fixes the issue by adding .section .rodata to explicitly place arrays in the read-only data segment. For detailed debug and analysis, see: https://github.com/j1akai/temp/blob/main/20251113/readme.md v1 -> v2： - Drop changes to .align, and .globl. Signed-off-by: Jiakai Xu Signed-off-by: Jiakai Xu Link: https://patch.msgid.link/738dd4e2.ff73.19a7cd7b4d5.Coremail.xujiakai2025@iscas.ac.cn Link: https://github.com/llvm/llvm-project/issues/168308 Link: https://patch.msgid.link/20251226032317.1523764-1-jiakaiPeanut@gmail.com Signed-off-by: Paul Walmsley --- arch/riscv/kernel/tests/kprobes/test-kprobes-asm.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/riscv/kernel/tests/kprobes/test-kprobes-asm.S b/arch/riscv/kernel/tests/kprobes/test-kprobes-asm.S index b951d0f12482..f16deee9e091 100644 --- a/arch/riscv/kernel/tests/kprobes/test-kprobes-asm.S +++ b/arch/riscv/kernel/tests/kprobes/test-kprobes-asm.S @@ -181,6 +181,7 @@ SYM_FUNC_END(test_kprobes_c_bnez) #endif /* CONFIG_RISCV_ISA_C */ +.section .rodata SYM_DATA_START(test_kprobes_addresses) RISCV_PTR test_kprobes_add_addr1 RISCV_PTR test_kprobes_add_addr2 @@ -212,6 +213,7 @@ SYM_DATA_START(test_kprobes_addresses) RISCV_PTR 0 SYM_DATA_END(test_kprobes_addresses) +.section .rodata SYM_DATA_START(test_kprobes_functions) RISCV_PTR test_kprobes_add RISCV_PTR test_kprobes_jal From 882ddfc6b70e2535e028d4aa14a7d8bb2ca0fbd4 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 30 Dec 2025 22:10:45 +0100 Subject: [PATCH 083/283] Update .mailmap for Linus Walleij Developers run into bouncing emails from my old address, so add it to .mailmap. Stuff in the rest of my old mail addresses as well while we're at it. Reported-by: Andy Shevchenko Signed-off-by: Linus Walleij --- .mailmap | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/.mailmap b/.mailmap index 84309a39d329..94130dd3e910 100644 --- a/.mailmap +++ b/.mailmap @@ -471,6 +471,10 @@ Linas Vepstas Linus Lüssing Linus Lüssing Linus Lüssing +Linus Walleij +Linus Walleij +Linus Walleij +Linus Walleij Li Yang Li Yang From 0ddd3bb4b14c9102c0267b3fd916c81fe5ab89c1 Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Thu, 11 Dec 2025 16:33:44 +0400 Subject: [PATCH 084/283] drm/pl111: Fix error handling in pl111_amba_probe Jump to the existing dev_put label when devm_request_irq() fails so drm_dev_put() and of_reserved_mem_device_release() run instead of returning early and leaking resources. Found via static analysis and code review. Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin Reviewed-by: Javier Martinez Canillas Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251211123345.2392065-1-linmq006@gmail.com --- drivers/gpu/drm/pl111/pl111_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c index 56ff6a3fb483..d7dc83cf7b00 100644 --- a/drivers/gpu/drm/pl111/pl111_drv.c +++ b/drivers/gpu/drm/pl111/pl111_drv.c @@ -295,7 +295,7 @@ static int pl111_amba_probe(struct amba_device *amba_dev, variant->name, priv); if (ret != 0) { dev_err(dev, "%s failed irq %d\n", __func__, ret); - return ret; + goto dev_put; } ret = pl111_modeset_init(drm); From 9be25402d8522e16e5ebe84f2b1b6c5de082a388 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Matou=C5=A1=20L=C3=A1nsk=C3=BD?= Date: Wed, 31 Dec 2025 18:12:07 +0100 Subject: [PATCH 085/283] ALSA: hda/realtek: Add quirk for Acer Nitro AN517-55 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add headset mic quirk for Acer Nitro AN517-55. This laptop uses the same audio configuration as the AN515-58 model. Signed-off-by: Matouš Lánský Link: https://patch.msgid.link/20251231171207.76943-1-matouslansky@post.cz Signed-off-by: Takashi Iwai --- sound/hda/codecs/realtek/alc269.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index 1de46c06f8c2..67baf04551cb 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -6321,6 +6321,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1025, 0x1466, "Acer Aspire A515-56", ALC255_FIXUP_ACER_HEADPHONE_AND_MIC), SND_PCI_QUIRK(0x1025, 0x1534, "Acer Predator PH315-54", ALC255_FIXUP_ACER_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1025, 0x159c, "Acer Nitro 5 AN515-58", ALC2XX_FIXUP_HEADSET_MIC), + SND_PCI_QUIRK(0x1025, 0x1597, "Acer Nitro 5 AN517-55", ALC2XX_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1025, 0x169a, "Acer Swift SFG16", ALC256_FIXUP_ACER_SFG16_MICMUTE_LED), SND_PCI_QUIRK(0x1025, 0x1826, "Acer Helios ZPC", ALC287_FIXUP_PREDATOR_SPK_CS35L41_I2C_2), SND_PCI_QUIRK(0x1025, 0x182c, "Acer Helios ZPD", ALC287_FIXUP_PREDATOR_SPK_CS35L41_I2C_2), From 7711f4bb4b360d9c0ff84db1c0ec91e385625047 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 4 Dec 2025 12:20:35 +0100 Subject: [PATCH 086/283] netfilter: nft_set_pipapo: fix range overlap detection set->klen has to be used, not sizeof(). The latter only compares a single register but a full check of the entire key is needed. Example: table ip t { map s { typeof iifname . ip saddr : verdict flags interval } } nft add element t s '{ "lo" . 10.0.0.0/24 : drop }' # no error, expected nft add element t s '{ "lo" . 10.0.0.0/24 : drop }' # no error, expected nft add element t s '{ "lo" . 10.0.0.0/8 : drop }' # bug: no error The 3rd 'add element' should be rejected via -ENOTEMPTY, not -EEXIST, so userspace / nft can report an error to the user. The latter is only correct for the 2nd case (re-add of existing element). As-is, userspace is told that the command was successful, but no elements were added. After this patch, 3rd command gives: Error: Could not process rule: File exists add element t s { "lo" . 127.0.0.0/8 . "lo" : drop } ^^^^^^^^^^^^^^^^^^^^^^^^^ Fixes: 0eb4b5ee33f2 ("netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion") Signed-off-by: Florian Westphal --- net/netfilter/nft_set_pipapo.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nft_set_pipapo.c b/net/netfilter/nft_set_pipapo.c index 112fe46788b6..6d77a5f0088a 100644 --- a/net/netfilter/nft_set_pipapo.c +++ b/net/netfilter/nft_set_pipapo.c @@ -1317,8 +1317,8 @@ static int nft_pipapo_insert(const struct net *net, const struct nft_set *set, else dup_end = dup_key; - if (!memcmp(start, dup_key->data, sizeof(*dup_key->data)) && - !memcmp(end, dup_end->data, sizeof(*dup_end->data))) { + if (!memcmp(start, dup_key->data, set->klen) && + !memcmp(end, dup_end->data, set->klen)) { *elem_priv = &dup->priv; return -EEXIST; } From a675d1caa2041f05f6343fad67b04f8babf32217 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 4 Dec 2025 12:20:36 +0100 Subject: [PATCH 087/283] selftests: netfilter: nft_concat_range.sh: add check for overlap detection bug without 'netfilter: nft_set_pipapo: fix range overlap detection': reject overlapping range on add 0s [FAIL] Returned success for add { 1.2.3.4 . 1.2.4.1-1.2.4.2 } given set: table inet filter { [..] elements = { 1.2.3.4 . 1.2.4.1 counter packets 0 bytes 0, 1.2.3.0-1.2.3.4 . 1.2.4.2 counter packets 0 bytes 0 } } The element collides with existing ones and was not added, but kernel returned success to userspace. Signed-off-by: Florian Westphal --- .../net/netfilter/nft_concat_range.sh | 45 ++++++++++++++++++- 1 file changed, 44 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/netfilter/nft_concat_range.sh b/tools/testing/selftests/net/netfilter/nft_concat_range.sh index ad97c6227f35..394166f224a4 100755 --- a/tools/testing/selftests/net/netfilter/nft_concat_range.sh +++ b/tools/testing/selftests/net/netfilter/nft_concat_range.sh @@ -29,7 +29,7 @@ TYPES="net_port port_net net6_port port_proto net6_port_mac net6_port_mac_proto net6_port_net6_port net_port_mac_proto_net" # Reported bugs, also described by TYPE_ variables below -BUGS="flush_remove_add reload net_port_proto_match avx2_mismatch doublecreate" +BUGS="flush_remove_add reload net_port_proto_match avx2_mismatch doublecreate insert_overlap" # List of possible paths to pktgen script from kernel tree for performance tests PKTGEN_SCRIPT_PATHS=" @@ -420,6 +420,18 @@ race_repeat 0 perf_duration 0 " +TYPE_insert_overlap=" +display reject overlapping range on add +type_spec ipv4_addr . ipv4_addr +chain_spec ip saddr . ip daddr +dst addr4 +proto icmp + +race_repeat 0 + +perf_duration 0 +" + # Set template for all tests, types and rules are filled in depending on test set_template=' flush ruleset @@ -1954,6 +1966,37 @@ EOF return 0 } +add_fail() +{ + if nft add element inet filter test "$1" 2>/dev/null ; then + err "Returned success for add ${1} given set:" + err "$(nft -a list set inet filter test )" + return 1 + fi + + return 0 +} + +test_bug_insert_overlap() +{ + local elements="1.2.3.4 . 1.2.4.1" + + setup veth send_"${proto}" set || return ${ksft_skip} + + add "{ $elements }" || return 1 + + elements="1.2.3.0-1.2.3.4 . 1.2.4.1" + add_fail "{ $elements }" || return 1 + + elements="1.2.3.0-1.2.3.4 . 1.2.4.2" + add "{ $elements }" || return 1 + + elements="1.2.3.4 . 1.2.4.1-1.2.4.2" + add_fail "{ $elements }" || return 1 + + return 0 +} + test_reported_issues() { eval test_bug_"${subtest}" } From 36a3200575642846a96436d503d46544533bb943 Mon Sep 17 00:00:00 2001 From: Fernando Fernandez Mancera Date: Wed, 17 Dec 2025 21:21:59 +0100 Subject: [PATCH 088/283] netfilter: nft_synproxy: avoid possible data-race on update operation During nft_synproxy eval we are reading nf_synproxy_info struct which can be modified on update operation concurrently. As nf_synproxy_info struct fits in 32 bits, use READ_ONCE/WRITE_ONCE annotations. Fixes: ee394f96ad75 ("netfilter: nft_synproxy: add synproxy stateful object support") Signed-off-by: Fernando Fernandez Mancera Signed-off-by: Florian Westphal --- net/netfilter/nft_synproxy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nft_synproxy.c b/net/netfilter/nft_synproxy.c index 5d3e51825985..4d3e5a31b412 100644 --- a/net/netfilter/nft_synproxy.c +++ b/net/netfilter/nft_synproxy.c @@ -48,7 +48,7 @@ static void nft_synproxy_eval_v4(const struct nft_synproxy *priv, struct tcphdr *_tcph, struct synproxy_options *opts) { - struct nf_synproxy_info info = priv->info; + struct nf_synproxy_info info = READ_ONCE(priv->info); struct net *net = nft_net(pkt); struct synproxy_net *snet = synproxy_pernet(net); struct sk_buff *skb = pkt->skb; @@ -79,7 +79,7 @@ static void nft_synproxy_eval_v6(const struct nft_synproxy *priv, struct tcphdr *_tcph, struct synproxy_options *opts) { - struct nf_synproxy_info info = priv->info; + struct nf_synproxy_info info = READ_ONCE(priv->info); struct net *net = nft_net(pkt); struct synproxy_net *snet = synproxy_pernet(net); struct sk_buff *skb = pkt->skb; @@ -340,7 +340,7 @@ static void nft_synproxy_obj_update(struct nft_object *obj, struct nft_synproxy *newpriv = nft_obj_data(newobj); struct nft_synproxy *priv = nft_obj_data(obj); - priv->info = newpriv->info; + WRITE_ONCE(priv->info, newpriv->info); } static struct nft_object_type nft_synproxy_obj_type; From 2bafeb8d2f380c3a81d98bd7b78b854b564f9cd4 Mon Sep 17 00:00:00 2001 From: Daniel Gomez Date: Fri, 19 Dec 2025 06:13:20 +0100 Subject: [PATCH 089/283] netfilter: replace -EEXIST with -EBUSY The -EEXIST error code is reserved by the module loading infrastructure to indicate that a module is already loaded. When a module's init function returns -EEXIST, userspace tools like kmod interpret this as "module already loaded" and treat the operation as successful, returning 0 to the user even though the module initialization actually failed. Replace -EEXIST with -EBUSY to ensure correct error reporting in the module initialization path. Affected modules: * ebtable_broute ebtable_filter ebtable_nat arptable_filter * ip6table_filter ip6table_mangle ip6table_nat ip6table_raw * ip6table_security iptable_filter iptable_mangle iptable_nat * iptable_raw iptable_security Signed-off-by: Daniel Gomez Signed-off-by: Florian Westphal --- net/bridge/netfilter/ebtables.c | 2 +- net/netfilter/nf_log.c | 4 ++-- net/netfilter/x_tables.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 5697e3949a36..a04fc1757528 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1299,7 +1299,7 @@ int ebt_register_template(const struct ebt_table *t, int (*table_init)(struct ne list_for_each_entry(tmpl, &template_tables, list) { if (WARN_ON_ONCE(strcmp(t->name, tmpl->name) == 0)) { mutex_unlock(&ebt_mutex); - return -EEXIST; + return -EBUSY; } } diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 74cef8bf554c..62cf6a30875e 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -89,7 +89,7 @@ int nf_log_register(u_int8_t pf, struct nf_logger *logger) if (pf == NFPROTO_UNSPEC) { for (i = NFPROTO_UNSPEC; i < NFPROTO_NUMPROTO; i++) { if (rcu_access_pointer(loggers[i][logger->type])) { - ret = -EEXIST; + ret = -EBUSY; goto unlock; } } @@ -97,7 +97,7 @@ int nf_log_register(u_int8_t pf, struct nf_logger *logger) rcu_assign_pointer(loggers[i][logger->type], logger); } else { if (rcu_access_pointer(loggers[pf][logger->type])) { - ret = -EEXIST; + ret = -EBUSY; goto unlock; } rcu_assign_pointer(loggers[pf][logger->type], logger); diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c index 90b7630421c4..48105ea3df15 100644 --- a/net/netfilter/x_tables.c +++ b/net/netfilter/x_tables.c @@ -1764,7 +1764,7 @@ EXPORT_SYMBOL_GPL(xt_hook_ops_alloc); int xt_register_template(const struct xt_table *table, int (*table_init)(struct net *net)) { - int ret = -EEXIST, af = table->af; + int ret = -EBUSY, af = table->af; struct xt_template *t; mutex_lock(&xt[af].mutex); From bc277212b41ade2137b6278db24652d0847e9a91 Mon Sep 17 00:00:00 2001 From: Sander Vanheule Date: Fri, 19 Dec 2025 12:56:31 +0100 Subject: [PATCH 090/283] pinctrl: pic64gx-gpio2: Add REGMAP_MMIO dependency In line with other drivers depending on REGMAP_*, select the required symbol to prevent a linker error when building with COMPILE_TEST=y: ld: drivers/pinctrl/pinctrl-pic64gx-gpio2.o: in function `pic64gx_gpio2_probe': pinctrl-pic64gx-gpio2.c:315:(.text+0x198): undefined reference to `__devm_regmap_init_mmio_clk' Fixes: 38cf9d641314 ("pinctrl: add pic64gx "gpio2" pinmux driver") Signed-off-by: Sander Vanheule Signed-off-by: Linus Walleij --- drivers/pinctrl/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index bc7f37afc48b..7b9f792acb0e 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -491,6 +491,7 @@ config PINCTRL_PIC64GX depends on ARCH_MICROCHIP || COMPILE_TEST depends on OF select GENERIC_PINCONF + select REGMAP_MMIO default y help This selects the pinctrl driver for gpio2 on pic64gx. From ebc18e9854e5a2b62a041fb57b216a903af45b85 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 26 Nov 2025 13:22:19 +0100 Subject: [PATCH 091/283] pinctrl: qcom: lpass-lpi: mark the GPIO controller as sleeping The gpio_chip settings in this driver say the controller can't sleep but it actually uses a mutex for synchronization. This triggers the following BUG(): [ 9.233659] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:281 [ 9.233665] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 554, name: (udev-worker) [ 9.233669] preempt_count: 1, expected: 0 [ 9.233673] RCU nest depth: 0, expected: 0 [ 9.233688] Tainted: [W]=WARN [ 9.233690] Hardware name: Dell Inc. Latitude 7455/0FK7MX, BIOS 2.10.1 05/20/2025 [ 9.233694] Call trace: [ 9.233696] show_stack+0x24/0x38 (C) [ 9.233709] dump_stack_lvl+0x40/0x88 [ 9.233716] dump_stack+0x18/0x24 [ 9.233722] __might_resched+0x148/0x160 [ 9.233731] __might_sleep+0x38/0x98 [ 9.233736] mutex_lock+0x30/0xd8 [ 9.233749] lpi_config_set+0x2e8/0x3c8 [pinctrl_lpass_lpi] [ 9.233757] lpi_gpio_direction_output+0x58/0x90 [pinctrl_lpass_lpi] [ 9.233761] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233772] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233779] gpiod_direction_output+0x38/0xd0 [ 9.233786] gpio_shared_proxy_direction_output+0xb8/0x2a8 [gpio_shared_proxy] [ 9.233792] gpiod_direction_output_raw_commit+0x110/0x428 [ 9.233799] gpiod_direction_output_nonotify+0x234/0x358 [ 9.233806] gpiod_configure_flags+0x2c0/0x580 [ 9.233812] gpiod_find_and_request+0x358/0x4f8 [ 9.233819] gpiod_get_index+0x7c/0x98 [ 9.233826] devm_gpiod_get+0x34/0xb0 [ 9.233829] reset_gpio_probe+0x58/0x128 [reset_gpio] [ 9.233836] auxiliary_bus_probe+0xb0/0xf0 [ 9.233845] really_probe+0x14c/0x450 [ 9.233853] __driver_probe_device+0xb0/0x188 [ 9.233858] driver_probe_device+0x4c/0x250 [ 9.233863] __driver_attach+0xf8/0x2a0 [ 9.233868] bus_for_each_dev+0xf8/0x158 [ 9.233872] driver_attach+0x30/0x48 [ 9.233876] bus_add_driver+0x158/0x2b8 [ 9.233880] driver_register+0x74/0x118 [ 9.233886] __auxiliary_driver_register+0x94/0xe8 [ 9.233893] init_module+0x34/0xfd0 [reset_gpio] [ 9.233898] do_one_initcall+0xec/0x300 [ 9.233903] do_init_module+0x64/0x260 [ 9.233910] load_module+0x16c4/0x1900 [ 9.233915] __arm64_sys_finit_module+0x24c/0x378 [ 9.233919] invoke_syscall+0x4c/0xe8 [ 9.233925] el0_svc_common+0x8c/0xf0 [ 9.233929] do_el0_svc+0x28/0x40 [ 9.233934] el0_svc+0x38/0x100 [ 9.233938] el0t_64_sync_handler+0x84/0x130 [ 9.233943] el0t_64_sync+0x17c/0x180 Mark the controller as sleeping. Fixes: 6e261d1090d6 ("pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver") Cc: stable@vger.kernel.org Reported-by: Val Packett Closes: https://lore.kernel.org/all/98c0f185-b0e0-49ea-896c-f3972dd011ca@packett.cool/ Signed-off-by: Bartosz Golaszewski Reviewed-by: Dmitry Baryshkov Reviewed-by: Bjorn Andersson Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c index 1c97ec44aa5f..78212f992843 100644 --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c @@ -498,7 +498,7 @@ int lpi_pinctrl_probe(struct platform_device *pdev) pctrl->chip.base = -1; pctrl->chip.ngpio = data->npins; pctrl->chip.label = dev_name(dev); - pctrl->chip.can_sleep = false; + pctrl->chip.can_sleep = true; mutex_init(&pctrl->lock); From 9700b0fccf386b671e6f8401ddea6c5669cd0914 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 22 Dec 2025 11:01:26 +0100 Subject: [PATCH 092/283] gpiolib: allow multiple lookup tables per consumer The GPIO machine lookup mechanism dates back to old ARM board files where lookup tables would all be defined in a single place. Since then, lookup tables have also been used to address various DT and ACPI quirks like missing GPIOs and - as of recently - setting up shared GPIO proxy devices. The lookup itself stops when we find the first matching table for a consumer and - if it doesn't contain the right entry - the lookup fails. Since the tables can now be defined in multiple places and we can't know how many there are, effectively limiting a consumer to only a single lookup table is no longer viable. Rework the code to always look through all tables matching the consumer. Link: https://lore.kernel.org/r/20251222-gpio-shared-reset-gpio-proxy-v1-1-8d4bba7d8c14@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib.c | 91 ++++++++++++++++++++++++++---------------- 1 file changed, 56 insertions(+), 35 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 91e0c384f34a..6d583b3b07bb 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -4508,45 +4508,41 @@ void gpiod_remove_hogs(struct gpiod_hog *hogs) } EXPORT_SYMBOL_GPL(gpiod_remove_hogs); -static struct gpiod_lookup_table *gpiod_find_lookup_table(struct device *dev) +static bool gpiod_match_lookup_table(struct device *dev, + const struct gpiod_lookup_table *table) { const char *dev_id = dev ? dev_name(dev) : NULL; - struct gpiod_lookup_table *table; - list_for_each_entry(table, &gpio_lookup_list, list) { - if (table->dev_id && dev_id) { - /* - * Valid strings on both ends, must be identical to have - * a match - */ - if (!strcmp(table->dev_id, dev_id)) - return table; - } else { - /* - * One of the pointers is NULL, so both must be to have - * a match - */ - if (dev_id == table->dev_id) - return table; - } + lockdep_assert_held(&gpio_lookup_lock); + + if (table->dev_id && dev_id) { + /* + * Valid strings on both ends, must be identical to have + * a match + */ + if (!strcmp(table->dev_id, dev_id)) + return true; + } else { + /* + * One of the pointers is NULL, so both must be to have + * a match + */ + if (dev_id == table->dev_id) + return true; } - return NULL; + return false; } -static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id, - unsigned int idx, unsigned long *flags) +static struct gpio_desc *gpio_desc_table_match(struct device *dev, const char *con_id, + unsigned int idx, unsigned long *flags, + struct gpiod_lookup_table *table) { - struct gpio_desc *desc = ERR_PTR(-ENOENT); - struct gpiod_lookup_table *table; + struct gpio_desc *desc; struct gpiod_lookup *p; struct gpio_chip *gc; - guard(mutex)(&gpio_lookup_lock); - - table = gpiod_find_lookup_table(dev); - if (!table) - return desc; + lockdep_assert_held(&gpio_lookup_lock); for (p = &table->table[0]; p->key; p++) { /* idx must always match exactly */ @@ -4600,6 +4596,29 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id, return desc; } + return NULL; +} + +static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id, + unsigned int idx, unsigned long *flags) +{ + struct gpio_desc *desc = ERR_PTR(-ENOENT); + struct gpiod_lookup_table *table; + + guard(mutex)(&gpio_lookup_lock); + + list_for_each_entry(table, &gpio_lookup_list, list) { + if (!gpiod_match_lookup_table(dev, table)) + continue; + + desc = gpio_desc_table_match(dev, con_id, idx, flags, table); + if (!desc) + continue; + + /* On IS_ERR() or match. */ + return desc; + } + return desc; } @@ -4610,14 +4629,16 @@ static int platform_gpio_count(struct device *dev, const char *con_id) unsigned int count = 0; scoped_guard(mutex, &gpio_lookup_lock) { - table = gpiod_find_lookup_table(dev); - if (!table) - return -ENOENT; + list_for_each_entry(table, &gpio_lookup_list, list) { + if (!gpiod_match_lookup_table(dev, table)) + continue; - for (p = &table->table[0]; p->key; p++) { - if ((con_id && p->con_id && !strcmp(con_id, p->con_id)) || - (!con_id && !p->con_id)) - count++; + for (p = &table->table[0]; p->key; p++) { + if ((con_id && p->con_id && + !strcmp(con_id, p->con_id)) || + (!con_id && !p->con_id)) + count++; + } } } From cb0451e33be047fff7137f58d9996370e11fb344 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 22 Dec 2025 11:01:27 +0100 Subject: [PATCH 093/283] gpio: shared: verify con_id when adding proxy lookup When matching the firmware node with the potential consumer, we currently omit the con_id string. This can lead to false positives in the unlikely case of the consumer having been assigned more than one shared GPIO. Check the connector ID before proceeding. Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support") Link: https://lore.kernel.org/r/20251222-gpio-shared-reset-gpio-proxy-v1-2-8d4bba7d8c14@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-shared.c | 7 ++++++- drivers/gpio/gpiolib-shared.h | 4 +++- drivers/gpio/gpiolib.c | 3 ++- 3 files changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpiolib-shared.c b/drivers/gpio/gpiolib-shared.c index ba4b718d40a0..f589109590c7 100644 --- a/drivers/gpio/gpiolib-shared.c +++ b/drivers/gpio/gpiolib-shared.c @@ -365,7 +365,8 @@ static bool gpio_shared_dev_is_reset_gpio(struct device *consumer, } #endif /* CONFIG_RESET_GPIO */ -int gpio_shared_add_proxy_lookup(struct device *consumer, unsigned long lflags) +int gpio_shared_add_proxy_lookup(struct device *consumer, const char *con_id, + unsigned long lflags) { const char *dev_id = dev_name(consumer); struct gpio_shared_entry *entry; @@ -384,6 +385,10 @@ int gpio_shared_add_proxy_lookup(struct device *consumer, unsigned long lflags) guard(mutex)(&ref->lock); + if ((!con_id && ref->con_id) || (con_id && !ref->con_id) || + (con_id && ref->con_id && strcmp(con_id, ref->con_id) != 0)) + continue; + /* We've already done that on a previous request. */ if (ref->lookup) return 0; diff --git a/drivers/gpio/gpiolib-shared.h b/drivers/gpio/gpiolib-shared.h index 667dbdff3585..40568ef7364c 100644 --- a/drivers/gpio/gpiolib-shared.h +++ b/drivers/gpio/gpiolib-shared.h @@ -16,7 +16,8 @@ struct device; int gpio_device_setup_shared(struct gpio_device *gdev); void gpio_device_teardown_shared(struct gpio_device *gdev); -int gpio_shared_add_proxy_lookup(struct device *consumer, unsigned long lflags); +int gpio_shared_add_proxy_lookup(struct device *consumer, const char *con_id, + unsigned long lflags); #else @@ -28,6 +29,7 @@ static inline int gpio_device_setup_shared(struct gpio_device *gdev) static inline void gpio_device_teardown_shared(struct gpio_device *gdev) { } static inline int gpio_shared_add_proxy_lookup(struct device *consumer, + const char *con_id, unsigned long lflags) { return 0; diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 6d583b3b07bb..9ccfb7af67cc 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -4717,7 +4717,8 @@ struct gpio_desc *gpiod_find_and_request(struct device *consumer, * lookup table for the proxy device as previously * we only knew the consumer's fwnode. */ - ret = gpio_shared_add_proxy_lookup(consumer, lookupflags); + ret = gpio_shared_add_proxy_lookup(consumer, con_id, + lookupflags); if (ret) return ERR_PTR(ret); From 49416483a953662aa53c6d9bef651757d4a95ba5 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 22 Dec 2025 11:01:28 +0100 Subject: [PATCH 094/283] gpio: shared: allow sharing a reset-gpios pin between reset-gpio and gpiolib We currently support sharing GPIOs between multiple devices whose drivers use either the GPIOLIB API *OR* the reset control API but not both at the same time. There's an unlikely corner-case where a reset-gpios pin can be shared by one driver using the GPIOLIB API and a second using the reset API. This will currently not work as the reset-gpio consumers are not described in firmware at the time of scanning so the shared GPIO just chooses one of the proxies created for the consumers when the reset-gpio driver performs the lookup. This can of course conflict in the case described above. In order to fix it: if we deal with the "reset-gpios" pin that's shared acconding to the firmware node setup, create a proxy for each described consumer as well as another one for the potential reset-gpio device. To that end: rework the matching to take this into account. Fixes: 7b78b26757e0 ("gpio: shared: handle the reset-gpios corner case") Link: https://lore.kernel.org/r/20251222-gpio-shared-reset-gpio-proxy-v1-3-8d4bba7d8c14@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-shared.c | 182 ++++++++++++++++++++++++---------- 1 file changed, 129 insertions(+), 53 deletions(-) diff --git a/drivers/gpio/gpiolib-shared.c b/drivers/gpio/gpiolib-shared.c index f589109590c7..baf7e07a3bb8 100644 --- a/drivers/gpio/gpiolib-shared.c +++ b/drivers/gpio/gpiolib-shared.c @@ -76,6 +76,56 @@ gpio_shared_find_entry(struct fwnode_handle *controller_node, return NULL; } +static struct gpio_shared_ref *gpio_shared_make_ref(struct fwnode_handle *fwnode, + const char *con_id, + enum gpiod_flags flags) +{ + char *con_id_cpy __free(kfree) = NULL; + + struct gpio_shared_ref *ref __free(kfree) = kzalloc(sizeof(*ref), GFP_KERNEL); + if (!ref) + return NULL; + + if (con_id) { + con_id_cpy = kstrdup(con_id, GFP_KERNEL); + if (!con_id_cpy) + return NULL; + } + + ref->dev_id = ida_alloc(&gpio_shared_ida, GFP_KERNEL); + if (ref->dev_id < 0) + return NULL; + + ref->flags = flags; + ref->con_id = no_free_ptr(con_id_cpy); + ref->fwnode = fwnode; + mutex_init(&ref->lock); + + return no_free_ptr(ref); +} + +static int gpio_shared_setup_reset_proxy(struct gpio_shared_entry *entry, + enum gpiod_flags flags) +{ + struct gpio_shared_ref *ref; + + list_for_each_entry(ref, &entry->refs, list) { + if (!ref->fwnode && ref->con_id && strcmp(ref->con_id, "reset") == 0) + return 0; + } + + ref = gpio_shared_make_ref(NULL, "reset", flags); + if (!ref) + return -ENOMEM; + + list_add_tail(&ref->list, &entry->refs); + + pr_debug("Created a secondary shared GPIO reference for potential reset-gpio device for GPIO %u at %s\n", + entry->offset, fwnode_get_name(entry->fwnode)); + + return 0; +} + /* Handle all special nodes that we should ignore. */ static bool gpio_shared_of_node_ignore(struct device_node *node) { @@ -106,6 +156,7 @@ static int gpio_shared_of_traverse(struct device_node *curr) size_t con_id_len, suffix_len; struct fwnode_handle *fwnode; struct of_phandle_args args; + struct gpio_shared_ref *ref; struct property *prop; unsigned int offset; const char *suffix; @@ -138,6 +189,7 @@ static int gpio_shared_of_traverse(struct device_node *curr) for (i = 0; i < count; i++) { struct device_node *np __free(device_node) = NULL; + char *con_id __free(kfree) = NULL; ret = of_parse_phandle_with_args(curr, prop->name, "#gpio-cells", i, @@ -182,15 +234,6 @@ static int gpio_shared_of_traverse(struct device_node *curr) list_add_tail(&entry->list, &gpio_shared_list); } - struct gpio_shared_ref *ref __free(kfree) = - kzalloc(sizeof(*ref), GFP_KERNEL); - if (!ref) - return -ENOMEM; - - ref->fwnode = fwnode_handle_get(of_fwnode_handle(curr)); - ref->flags = args.args[1]; - mutex_init(&ref->lock); - if (strends(prop->name, "gpios")) suffix = "-gpios"; else if (strends(prop->name, "gpio")) @@ -202,27 +245,32 @@ static int gpio_shared_of_traverse(struct device_node *curr) /* We only set con_id if there's actually one. */ if (strcmp(prop->name, "gpios") && strcmp(prop->name, "gpio")) { - ref->con_id = kstrdup(prop->name, GFP_KERNEL); - if (!ref->con_id) + con_id = kstrdup(prop->name, GFP_KERNEL); + if (!con_id) return -ENOMEM; - con_id_len = strlen(ref->con_id); + con_id_len = strlen(con_id); suffix_len = strlen(suffix); - ref->con_id[con_id_len - suffix_len] = '\0'; + con_id[con_id_len - suffix_len] = '\0'; } - ref->dev_id = ida_alloc(&gpio_shared_ida, GFP_KERNEL); - if (ref->dev_id < 0) { - kfree(ref->con_id); + ref = gpio_shared_make_ref(fwnode_handle_get(of_fwnode_handle(curr)), + con_id, args.args[1]); + if (!ref) return -ENOMEM; - } if (!list_empty(&entry->refs)) pr_debug("GPIO %u at %s is shared by multiple firmware nodes\n", entry->offset, fwnode_get_name(entry->fwnode)); - list_add_tail(&no_free_ptr(ref)->list, &entry->refs); + list_add_tail(&ref->list, &entry->refs); + + if (strcmp(prop->name, "reset-gpios") == 0) { + ret = gpio_shared_setup_reset_proxy(entry, args.args[1]); + if (ret) + return ret; + } } } @@ -306,20 +354,16 @@ static bool gpio_shared_dev_is_reset_gpio(struct device *consumer, struct fwnode_handle *reset_fwnode = dev_fwnode(consumer); struct fwnode_reference_args ref_args, aux_args; struct device *parent = consumer->parent; + struct gpio_shared_ref *real_ref; bool match; int ret; + lockdep_assert_held(&ref->lock); + /* The reset-gpio device must have a parent AND a firmware node. */ if (!parent || !reset_fwnode) return false; - /* - * FIXME: use device_is_compatible() once the reset-gpio drivers gains - * a compatible string which it currently does not have. - */ - if (!strstarts(dev_name(consumer), "reset.gpio.")) - return false; - /* * Parent of the reset-gpio auxiliary device is the GPIO chip whose * fwnode we stored in the entry structure. @@ -328,33 +372,56 @@ static bool gpio_shared_dev_is_reset_gpio(struct device *consumer, return false; /* - * The device associated with the shared reference's firmware node is - * the consumer of the reset control exposed by the reset-gpio device. - * It must have a "reset-gpios" property that's referencing the entry's - * firmware node. - * - * The reference args must agree between the real consumer and the - * auxiliary reset-gpio device. + * Now we need to find the actual pin we want to assign to this + * reset-gpio device. To that end: iterate over the list of references + * of this entry and see if there's one, whose reset-gpios property's + * arguments match the ones from this consumer's node. */ - ret = fwnode_property_get_reference_args(ref->fwnode, "reset-gpios", - NULL, 2, 0, &ref_args); - if (ret) - return false; + list_for_each_entry(real_ref, &entry->refs, list) { + if (!real_ref->fwnode) + continue; + + /* + * The device associated with the shared reference's firmware + * node is the consumer of the reset control exposed by the + * reset-gpio device. It must have a "reset-gpios" property + * that's referencing the entry's firmware node. + * + * The reference args must agree between the real consumer and + * the auxiliary reset-gpio device. + */ + ret = fwnode_property_get_reference_args(real_ref->fwnode, + "reset-gpios", + NULL, 2, 0, &ref_args); + if (ret) + continue; + + ret = fwnode_property_get_reference_args(reset_fwnode, "reset-gpios", + NULL, 2, 0, &aux_args); + if (ret) { + fwnode_handle_put(ref_args.fwnode); + continue; + } + + match = ((ref_args.fwnode == entry->fwnode) && + (aux_args.fwnode == entry->fwnode) && + (ref_args.args[0] == aux_args.args[0])); - ret = fwnode_property_get_reference_args(reset_fwnode, "reset-gpios", - NULL, 2, 0, &aux_args); - if (ret) { fwnode_handle_put(ref_args.fwnode); - return false; + fwnode_handle_put(aux_args.fwnode); + + if (!match) + continue; + + /* + * Reuse the fwnode of the real device, next time we'll use it + * in the normal path. + */ + ref->fwnode = fwnode_handle_get(real_ref->fwnode); + return true; } - match = ((ref_args.fwnode == entry->fwnode) && - (aux_args.fwnode == entry->fwnode) && - (ref_args.args[0] == aux_args.args[0])); - - fwnode_handle_put(ref_args.fwnode); - fwnode_handle_put(aux_args.fwnode); - return match; + return false; } #else static bool gpio_shared_dev_is_reset_gpio(struct device *consumer, @@ -379,12 +446,20 @@ int gpio_shared_add_proxy_lookup(struct device *consumer, const char *con_id, list_for_each_entry(entry, &gpio_shared_list, list) { list_for_each_entry(ref, &entry->refs, list) { - if (!device_match_fwnode(consumer, ref->fwnode) && - !gpio_shared_dev_is_reset_gpio(consumer, entry, ref)) - continue; - guard(mutex)(&ref->lock); + /* + * FIXME: use device_is_compatible() once the reset-gpio + * drivers gains a compatible string which it currently + * does not have. + */ + if (!ref->fwnode && strstarts(dev_name(consumer), "reset.gpio.")) { + if (!gpio_shared_dev_is_reset_gpio(consumer, entry, ref)) + continue; + } else if (!device_match_fwnode(consumer, ref->fwnode)) { + continue; + } + if ((!con_id && ref->con_id) || (con_id && !ref->con_id) || (con_id && ref->con_id && strcmp(con_id, ref->con_id) != 0)) continue; @@ -471,8 +546,9 @@ int gpio_device_setup_shared(struct gpio_device *gdev) entry->offset, gpio_device_get_label(gdev)); list_for_each_entry(ref, &entry->refs, list) { - pr_debug("Setting up a shared GPIO entry for %s\n", - fwnode_get_name(ref->fwnode)); + pr_debug("Setting up a shared GPIO entry for %s (con_id: '%s')\n", + fwnode_get_name(ref->fwnode) ?: "(no fwnode)", + ref->con_id ?: "(none)"); ret = gpio_shared_make_adev(gdev, entry, ref); if (ret) From a7ac22d53d0990152b108c3f4fe30df45fcb0181 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pawe=C5=82=20Narewski?= Date: Wed, 24 Dec 2025 09:26:40 +0100 Subject: [PATCH 095/283] gpiolib: fix race condition for gdev->srcu MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If two drivers were calling gpiochip_add_data_with_key(), one may be traversing the srcu-protected list in gpio_name_to_desc(), meanwhile other has just added its gdev in gpiodev_add_to_list_unlocked(). This creates a non-mutexed and non-protected timeframe, when one instance is dereferencing and using &gdev->srcu, before the other has initialized it, resulting in crash: [ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000 [ 4.943396] Mem abort info: [ 4.943400] ESR = 0x0000000096000005 [ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.943407] SET = 0, FnV = 0 [ 4.943410] EA = 0, S1PTW = 0 [ 4.943413] FSC = 0x05: level 1 translation fault [ 4.943416] Data abort info: [ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000 [ 4.961449] [ffff800272bcc000] pgd=0000000000000000 [ 4.969203] , p4d=1000000039739003 [ 4.979730] , pud=0000000000000000 [ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset" [ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP ... [ 5.121359] pc : __srcu_read_lock+0x44/0x98 [ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0 [ 5.153671] sp : ffff8000833bb430 [ 5.298440] [ 5.298443] Call trace: [ 5.298445] __srcu_read_lock+0x44/0x98 [ 5.309484] gpio_name_to_desc+0x60/0x1a0 [ 5.320692] gpiochip_add_data_with_key+0x488/0xf00 5.946419] ---[ end trace 0000000000000000 ]--- Move initialization code for gdev fields before it is added to gpio_devices, with adjacent initialization code. Adjust goto statements to reflect modified order of operations Fixes: 47d8b4c1d868 ("gpio: add SRCU infrastructure to struct gpio_device") Reviewed-by: Jakub Lewalski Signed-off-by: Paweł Narewski [Bartosz: fixed a build issue, removed stray newline] Link: https://lore.kernel.org/r/20251224082641.10769-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 9ccfb7af67cc..c06152b16dbc 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1105,6 +1105,18 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, gdev->ngpio = gc->ngpio; gdev->can_sleep = gc->can_sleep; + rwlock_init(&gdev->line_state_lock); + RAW_INIT_NOTIFIER_HEAD(&gdev->line_state_notifier); + BLOCKING_INIT_NOTIFIER_HEAD(&gdev->device_notifier); + + ret = init_srcu_struct(&gdev->srcu); + if (ret) + goto err_free_label; + + ret = init_srcu_struct(&gdev->desc_srcu); + if (ret) + goto err_cleanup_gdev_srcu; + scoped_guard(mutex, &gpio_devices_lock) { /* * TODO: this allocates a Linux GPIO number base in the global @@ -1119,7 +1131,7 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, if (base < 0) { ret = base; base = 0; - goto err_free_label; + goto err_cleanup_desc_srcu; } /* @@ -1139,22 +1151,10 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, ret = gpiodev_add_to_list_unlocked(gdev); if (ret) { gpiochip_err(gc, "GPIO integer space overlap, cannot add chip\n"); - goto err_free_label; + goto err_cleanup_desc_srcu; } } - rwlock_init(&gdev->line_state_lock); - RAW_INIT_NOTIFIER_HEAD(&gdev->line_state_notifier); - BLOCKING_INIT_NOTIFIER_HEAD(&gdev->device_notifier); - - ret = init_srcu_struct(&gdev->srcu); - if (ret) - goto err_remove_from_list; - - ret = init_srcu_struct(&gdev->desc_srcu); - if (ret) - goto err_cleanup_gdev_srcu; - #ifdef CONFIG_PINCTRL INIT_LIST_HEAD(&gdev->pin_ranges); #endif @@ -1164,11 +1164,11 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data, ret = gpiochip_set_names(gc); if (ret) - goto err_cleanup_desc_srcu; + goto err_remove_from_list; ret = gpiochip_init_valid_mask(gc); if (ret) - goto err_cleanup_desc_srcu; + goto err_remove_from_list; for (desc_index = 0; desc_index < gc->ngpio; desc_index++) { struct gpio_desc *desc = &gdev->descs[desc_index]; @@ -1248,10 +1248,6 @@ err_remove_of_chip: of_gpiochip_remove(gc); err_free_valid_mask: gpiochip_free_valid_mask(gc); -err_cleanup_desc_srcu: - cleanup_srcu_struct(&gdev->desc_srcu); -err_cleanup_gdev_srcu: - cleanup_srcu_struct(&gdev->srcu); err_remove_from_list: scoped_guard(mutex, &gpio_devices_lock) list_del_rcu(&gdev->list); @@ -1261,6 +1257,10 @@ err_remove_from_list: gpio_device_put(gdev); goto err_print_message; } +err_cleanup_desc_srcu: + cleanup_srcu_struct(&gdev->desc_srcu); +err_cleanup_gdev_srcu: + cleanup_srcu_struct(&gdev->srcu); err_free_label: kfree_const(gdev->label); err_free_descs: From 014a17deb41201449f76df2b20c857a9c3294a7c Mon Sep 17 00:00:00 2001 From: Ernest Van Hoecke Date: Wed, 17 Dec 2025 16:30:25 +0100 Subject: [PATCH 096/283] gpio: pca953x: handle short interrupt pulses on PCAL devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit GPIO drivers with latch input support may miss short pulses on input pins even when input latching is enabled. The generic interrupt logic in the pca953x driver reports interrupts by comparing the current input value against the previously sampled one and only signals an event when a level change is observed between two reads. For short pulses, the first edge is captured when the input register is read, but if the signal returns to its previous level before the read, the second edge is not observed. As a result, successive pulses can produce identical input values at read time and no level change is detected, causing interrupts to be missed. Below timing diagram shows this situation where the top signal is the input pin level and the bottom signal indicates the latched value. ─────┐ ┌──*───────────────┐ ┌──*─────────────────┐ ┌──*─── │ │ . │ │ . │ │ . │ │ │ │ │ │ │ │ │ └──*──┘ │ └──*──┘ │ └──*──┘ │ Input │ │ │ │ │ │ ▼ │ ▼ │ ▼ │ IRQ │ IRQ │ IRQ │ . . . ─────┐ .┌──────────────┐ .┌────────────────┐ .┌── │ │ │ │ │ │ │ │ │ │ │ │ └────────*┘ └────────*┘ └────────*┘ Latched │ │ │ ▼ ▼ ▼ READ 0 READ 0 READ 0 NO CHANGE NO CHANGE PCAL variants provide an interrupt status register that records which pins triggered an interrupt, but the status and input registers cannot be read atomically. The interrupt status is only cleared when the input port is read, and the input value must also be read to determine the triggering edge. If another interrupt occurs on a different line after the status register has been read but before the input register is sampled, that event will not be reflected in the earlier status snapshot, so relying solely on the interrupt status register is also insufficient. Support for input latching and interrupt status handling was previously added by [1], but the interrupt status-based logic was reverted by [2] due to these issues. This patch addresses the original problem by combining both sources of information. Events indicated by the interrupt status register are merged with events detected through the existing level-change logic. As a result: * short pulses, whose second edges are invisible, are detected via the interrupt status register, and * interrupts that occur between the status and input reads are still caught by the generic level-change logic. This significantly improves robustness on devices that signal interrupts as short pulses, while avoiding the issues that led to the earlier reversion. In practice, even if only the first edge of a pulse is observable, the interrupt is reliably detected. This fixes missed interrupts from an Ilitek touch controller with its interrupt line connected to a PCAL6416A, where active-low pulses are approximately 200 us long. [1] commit 44896beae605 ("gpio: pca953x: add PCAL9535 interrupt support for Galileo Gen2") [2] commit d6179f6c6204 ("gpio: pca953x: Improve interrupt support") Fixes: d6179f6c6204 ("gpio: pca953x: Improve interrupt support") Signed-off-by: Ernest Van Hoecke Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20251217153050.142057-1-ernestvanhoecke@gmail.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-pca953x.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 0a3916cc2772..8727ae54bc57 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -943,14 +943,35 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pendin DECLARE_BITMAP(old_stat, MAX_LINE); DECLARE_BITMAP(cur_stat, MAX_LINE); DECLARE_BITMAP(new_stat, MAX_LINE); + DECLARE_BITMAP(int_stat, MAX_LINE); DECLARE_BITMAP(trigger, MAX_LINE); DECLARE_BITMAP(edges, MAX_LINE); int ret; + if (chip->driver_data & PCA_PCAL) { + /* Read INT_STAT before it is cleared by the input-port read. */ + ret = pca953x_read_regs(chip, PCAL953X_INT_STAT, int_stat); + if (ret) + return false; + } + ret = pca953x_read_regs(chip, chip->regs->input, cur_stat); if (ret) return false; + if (chip->driver_data & PCA_PCAL) { + /* Detect short pulses via INT_STAT. */ + bitmap_and(trigger, int_stat, chip->irq_mask, gc->ngpio); + + /* Apply filter for rising/falling edge selection. */ + bitmap_replace(new_stat, chip->irq_trig_fall, chip->irq_trig_raise, + cur_stat, gc->ngpio); + + bitmap_and(int_stat, new_stat, trigger, gc->ngpio); + } else { + bitmap_zero(int_stat, gc->ngpio); + } + /* Remove output pins from the equation */ pca953x_read_regs(chip, chip->regs->direction, reg_direction); @@ -964,7 +985,8 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pendin if (bitmap_empty(chip->irq_trig_level_high, gc->ngpio) && bitmap_empty(chip->irq_trig_level_low, gc->ngpio)) { - if (bitmap_empty(trigger, gc->ngpio)) + if (bitmap_empty(trigger, gc->ngpio) && + bitmap_empty(int_stat, gc->ngpio)) return false; } @@ -972,6 +994,7 @@ static bool pca953x_irq_pending(struct pca953x_chip *chip, unsigned long *pendin bitmap_and(old_stat, chip->irq_trig_raise, new_stat, gc->ngpio); bitmap_or(edges, old_stat, cur_stat, gc->ngpio); bitmap_and(pending, edges, trigger, gc->ngpio); + bitmap_or(pending, pending, int_stat, gc->ngpio); bitmap_and(cur_stat, new_stat, chip->irq_trig_level_high, gc->ngpio); bitmap_and(cur_stat, cur_stat, chip->irq_mask, gc->ngpio); From d077e8119ddbb4fca67540f1a52453631a47f221 Mon Sep 17 00:00:00 2001 From: Zilin Guan Date: Wed, 24 Dec 2025 12:48:26 +0000 Subject: [PATCH 097/283] netfilter: nf_tables: fix memory leak in nf_tables_newrule() In nf_tables_newrule(), if nft_use_inc() fails, the function jumps to the err_release_rule label without freeing the allocated flow, leading to a memory leak. Fix this by adding a new label err_destroy_flow and jumping to it when nft_use_inc() fails. This ensures that the flow is properly released in this error case. Fixes: 1689f25924ada ("netfilter: nf_tables: report use refcount overflow") Signed-off-by: Zilin Guan Signed-off-by: Florian Westphal --- net/netfilter/nf_tables_api.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 618af6e90773..729a92781a1a 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4439,7 +4439,7 @@ static int nf_tables_newrule(struct sk_buff *skb, const struct nfnl_info *info, if (!nft_use_inc(&chain->use)) { err = -EMFILE; - goto err_release_rule; + goto err_destroy_flow; } if (info->nlh->nlmsg_flags & NLM_F_REPLACE) { @@ -4489,6 +4489,7 @@ static int nf_tables_newrule(struct sk_buff *skb, const struct nfnl_info *info, err_destroy_flow_rule: nft_use_dec_restore(&chain->use); +err_destroy_flow: if (flow) nft_flow_rule_destroy(flow); err_release_rule: From 7811ba452402d58628e68faedf38745b3d485e3c Mon Sep 17 00:00:00 2001 From: Fernando Fernandez Mancera Date: Wed, 17 Dec 2025 15:46:40 +0100 Subject: [PATCH 098/283] netfilter: nf_conncount: update last_gc only when GC has been performed Currently last_gc is being updated everytime a new connection is tracked, that means that it is updated even if a GC wasn't performed. With a sufficiently high packet rate, it is possible to always bypass the GC, causing the list to grow infinitely. Update the last_gc value only when a GC has been actually performed. Fixes: d265929930e2 ("netfilter: nf_conncount: reduce unnecessary GC") Signed-off-by: Fernando Fernandez Mancera Signed-off-by: Florian Westphal --- net/netfilter/nf_conncount.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c index 3654f1e8976c..8487808c8761 100644 --- a/net/netfilter/nf_conncount.c +++ b/net/netfilter/nf_conncount.c @@ -229,6 +229,7 @@ static int __nf_conncount_add(struct net *net, nf_ct_put(found_ct); } + list->last_gc = (u32)jiffies; add_new_node: if (WARN_ON_ONCE(list->count > INT_MAX)) { @@ -248,7 +249,6 @@ add_new_node: conn->jiffies32 = (u32)jiffies; list_add_tail(&conn->node, &list->head); list->count++; - list->last_gc = (u32)jiffies; out_put: if (refcounted) From 1e876e5a0875e71e34148c9feb2eedd3bf6b2b43 Mon Sep 17 00:00:00 2001 From: Abdun Nihaal Date: Fri, 26 Dec 2025 11:34:10 +0530 Subject: [PATCH 099/283] gpio: mpsse: fix reference leak in gpio_mpsse_probe() error paths The reference obtained by calling usb_get_dev() is not released in the gpio_mpsse_probe() error paths. Fix that by using device managed helper functions. Also remove the usb_put_dev() call in the disconnect function since now it will be released automatically. Cc: stable@vger.kernel.org Fixes: c46a74ff05c0 ("gpio: add support for FTDI's MPSSE as GPIO") Signed-off-by: Abdun Nihaal Link: https://lore.kernel.org/r/20251226060414.20785-1-nihaal@cse.iitm.ac.in Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-mpsse.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mpsse.c b/drivers/gpio/gpio-mpsse.c index ace652ba4df1..12191aeb6566 100644 --- a/drivers/gpio/gpio-mpsse.c +++ b/drivers/gpio/gpio-mpsse.c @@ -548,6 +548,13 @@ static void gpio_mpsse_ida_remove(void *data) ida_free(&gpio_mpsse_ida, priv->id); } +static void gpio_mpsse_usb_put_dev(void *data) +{ + struct mpsse_priv *priv = data; + + usb_put_dev(priv->udev); +} + static int mpsse_init_valid_mask(struct gpio_chip *chip, unsigned long *valid_mask, unsigned int ngpios) @@ -592,6 +599,10 @@ static int gpio_mpsse_probe(struct usb_interface *interface, INIT_LIST_HEAD(&priv->workers); priv->udev = usb_get_dev(interface_to_usbdev(interface)); + err = devm_add_action_or_reset(dev, gpio_mpsse_usb_put_dev, priv); + if (err) + return err; + priv->intf = interface; priv->intf_id = interface->cur_altsetting->desc.bInterfaceNumber; @@ -713,7 +724,6 @@ static void gpio_mpsse_disconnect(struct usb_interface *intf) priv->intf = NULL; usb_set_intfdata(intf, NULL); - usb_put_dev(priv->udev); } static struct usb_driver gpio_mpsse_driver = { From 9ed7a28225af02b74f61e7880d460db49db83758 Mon Sep 17 00:00:00 2001 From: Ruslan Krupitsa Date: Fri, 2 Jan 2026 02:53:36 +0300 Subject: [PATCH 100/283] ALSA: hda/realtek: add HP Laptop 15s-eq1xxx mute LED quirk HP Laptop 15s-eq1xxx with ALC236 codec does not enable the mute LED automatically. This patch adds a quirk entry for subsystem ID 0x8706 using the ALC236_FIXUP_HP_MUTE_LED_COEFBIT2 fixup, enabling correct mute LED behavior. Signed-off-by: Ruslan Krupitsa Link: https://patch.msgid.link/AS8P194MB112895B8EC2D87D53A876085BBBAA@AS8P194MB1128.EURP194.PROD.OUTLOOK.COM Signed-off-by: Takashi Iwai --- sound/hda/codecs/realtek/alc269.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/hda/codecs/realtek/alc269.c b/sound/hda/codecs/realtek/alc269.c index 67baf04551cb..61c7372e6307 100644 --- a/sound/hda/codecs/realtek/alc269.c +++ b/sound/hda/codecs/realtek/alc269.c @@ -6509,6 +6509,7 @@ static const struct hda_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x863e, "HP Spectre x360 15-df1xxx", ALC285_FIXUP_HP_SPECTRE_X360_DF1), SND_PCI_QUIRK(0x103c, 0x86e8, "HP Spectre x360 15-eb0xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), SND_PCI_QUIRK(0x103c, 0x86f9, "HP Spectre x360 13-aw0xxx", ALC285_FIXUP_HP_SPECTRE_X360_MUTE_LED), + SND_PCI_QUIRK(0x103c, 0x8706, "HP Laptop 15s-eq1xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), SND_PCI_QUIRK(0x103c, 0x8716, "HP Elite Dragonfly G2 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT), SND_PCI_QUIRK(0x103c, 0x8720, "HP EliteBook x360 1040 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_AMP_INIT), SND_PCI_QUIRK(0x103c, 0x8724, "HP EliteBook 850 G7", ALC285_FIXUP_HP_GPIO_LED), From 32cb3840386fd3684fbe8294cfc0a6684417139e Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 31 Dec 2025 13:57:27 +0900 Subject: [PATCH 101/283] rust: dma: fix broken intra-doc links The `pci` module is conditional on CONFIG_PCI. When it's disabled, the intra-doc link to `pci::Device` causes rustdoc warnings: warning: unresolved link to `::kernel::pci::Device` --> rust/kernel/dma.rs:30:70 | 30 | /// where the underlying bus is DMA capable, such as [`pci::Device`](::kernel::pci::Device) or | ^^^^^^^^^^^^^^^^^^^^^ no item named `pci` in module `kernel` Fix this by making the documentation conditional on CONFIG_PCI. Fixes: d06d5f66f549 ("rust: dma: implement `dma::Device` trait") Signed-off-by: FUJITA Tomonori Reviewed-by: Dirk Behme Link: https://patch.msgid.link/20251231045728.1912024-1-fujita.tomonori@gmail.com [ Keep the "such as" part indicating a list of examples; fix typos in commit message. - Danilo ] Signed-off-by: Danilo Krummrich --- rust/kernel/dma.rs | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/rust/kernel/dma.rs b/rust/kernel/dma.rs index 2ac107d8f7b7..acc65b1e0f24 100644 --- a/rust/kernel/dma.rs +++ b/rust/kernel/dma.rs @@ -27,8 +27,9 @@ pub type DmaAddress = bindings::dma_addr_t; /// Trait to be implemented by DMA capable bus devices. /// /// The [`dma::Device`](Device) trait should be implemented by bus specific device representations, -/// where the underlying bus is DMA capable, such as [`pci::Device`](::kernel::pci::Device) or -/// [`platform::Device`](::kernel::platform::Device). +/// where the underlying bus is DMA capable, such as: +#[cfg_attr(CONFIG_PCI, doc = "* [`pci::Device`](kernel::pci::Device)")] +/// * [`platform::Device`](::kernel::platform::Device) pub trait Device: AsRef> { /// Set up the device's DMA streaming addressing capabilities. /// From a9a42f0754b6c69525612d678b73da790e28b9fd Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Wed, 31 Dec 2025 13:57:28 +0900 Subject: [PATCH 102/283] rust: device: fix broken intra-doc links The `pci` module is conditional on CONFIG_PCI. When it's disabled, the intra-doc link to `pci::Device` causes rustdoc warnings: warning: unresolved link to `kernel::pci::Device` --> rust/kernel/device.rs:163:22 | 163 | /// [`pci::Device`]: kernel::pci::Device | ^^^^^^^^^^^^^^^^^^^ no item named `pci` in module `kernel` | = note: `#[warn(rustdoc::broken_intra_doc_links)]` on by default Fix this by making the documentation conditional on CONFIG_PCI. Fixes: d6e26c1ae4a6 ("device: rust: expand documentation for Device") Signed-off-by: FUJITA Tomonori Reviewed-by: Dirk Behme Link: https://patch.msgid.link/20251231045728.1912024-2-fujita.tomonori@gmail.com [ Keep the "such as" part indicating a list of examples; fix typos in commit message. - Danilo ] Signed-off-by: Danilo Krummrich --- rust/kernel/device.rs | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/rust/kernel/device.rs b/rust/kernel/device.rs index c79be2e2bfe3..5c2e1e0369e9 100644 --- a/rust/kernel/device.rs +++ b/rust/kernel/device.rs @@ -67,8 +67,9 @@ static_assert!(core::mem::size_of::() >= core::mem::size_ /// /// # Implementing Bus Devices /// -/// This section provides a guideline to implement bus specific devices, such as [`pci::Device`] or -/// [`platform::Device`]. +/// This section provides a guideline to implement bus specific devices, such as: +#[cfg_attr(CONFIG_PCI, doc = "* [`pci::Device`](kernel::pci::Device)")] +/// * [`platform::Device`] /// /// A bus specific device should be defined as follows. /// @@ -160,7 +161,6 @@ static_assert!(core::mem::size_of::() >= core::mem::size_ /// /// [`AlwaysRefCounted`]: kernel::types::AlwaysRefCounted /// [`impl_device_context_deref`]: kernel::impl_device_context_deref -/// [`pci::Device`]: kernel::pci::Device /// [`platform::Device`]: kernel::platform::Device #[repr(transparent)] pub struct Device(Opaque, PhantomData); From c6c209ceb87f64a6ceebe61761951dcbbf4a0baa Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Tue, 9 Dec 2025 19:28:49 -0500 Subject: [PATCH 103/283] NFSD: Remove NFSERR_EAGAIN I haven't found an NFSERR_EAGAIN in RFCs 1094, 1813, 7530, or 8881. None of these RFCs have an NFS status code that match the numeric value "11". Based on the meaning of the EAGAIN errno, I presume the use of this status in NFSD means NFS4ERR_DELAY. So replace the one usage of nfserr_eagain, and remove it from NFSD's NFS status conversion tables. As far as I can tell, NFSERR_EAGAIN has existed since the pre-git era, but was not actually used by any code until commit f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed."), at which time it become possible for NFSD to return a status code of 11 (which is not valid NFS protocol). Fixes: f4e44b393389 ("NFSD: delay unmount source's export after inter-server copy completed.") Cc: stable@vger.kernel.org Reviewed-by: NeilBrown Reviewed-by: Jeff Layton Signed-off-by: Chuck Lever --- fs/nfs_common/common.c | 1 - fs/nfsd/nfs4proc.c | 2 +- fs/nfsd/nfsd.h | 1 - include/trace/misc/nfs.h | 2 -- include/uapi/linux/nfs.h | 1 - 5 files changed, 1 insertion(+), 6 deletions(-) diff --git a/fs/nfs_common/common.c b/fs/nfs_common/common.c index af09aed09fd2..0778743ae2c2 100644 --- a/fs/nfs_common/common.c +++ b/fs/nfs_common/common.c @@ -17,7 +17,6 @@ static const struct { { NFSERR_NOENT, -ENOENT }, { NFSERR_IO, -EIO }, { NFSERR_NXIO, -ENXIO }, -/* { NFSERR_EAGAIN, -EAGAIN }, */ { NFSERR_ACCES, -EACCES }, { NFSERR_EXIST, -EEXIST }, { NFSERR_XDEV, -EXDEV }, diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 7f7e6bb23a90..42a6b914c0fe 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -1506,7 +1506,7 @@ try_again: (schedule_timeout(20*HZ) == 0)) { finish_wait(&nn->nfsd_ssc_waitq, &wait); kfree(work); - return nfserr_eagain; + return nfserr_jukebox; } finish_wait(&nn->nfsd_ssc_waitq, &wait); goto try_again; diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h index 50be785f1d2c..b0283213a8f5 100644 --- a/fs/nfsd/nfsd.h +++ b/fs/nfsd/nfsd.h @@ -233,7 +233,6 @@ void nfsd_lockd_shutdown(void); #define nfserr_noent cpu_to_be32(NFSERR_NOENT) #define nfserr_io cpu_to_be32(NFSERR_IO) #define nfserr_nxio cpu_to_be32(NFSERR_NXIO) -#define nfserr_eagain cpu_to_be32(NFSERR_EAGAIN) #define nfserr_acces cpu_to_be32(NFSERR_ACCES) #define nfserr_exist cpu_to_be32(NFSERR_EXIST) #define nfserr_xdev cpu_to_be32(NFSERR_XDEV) diff --git a/include/trace/misc/nfs.h b/include/trace/misc/nfs.h index c82233e950ac..a394b4d38e18 100644 --- a/include/trace/misc/nfs.h +++ b/include/trace/misc/nfs.h @@ -16,7 +16,6 @@ TRACE_DEFINE_ENUM(NFSERR_PERM); TRACE_DEFINE_ENUM(NFSERR_NOENT); TRACE_DEFINE_ENUM(NFSERR_IO); TRACE_DEFINE_ENUM(NFSERR_NXIO); -TRACE_DEFINE_ENUM(NFSERR_EAGAIN); TRACE_DEFINE_ENUM(NFSERR_ACCES); TRACE_DEFINE_ENUM(NFSERR_EXIST); TRACE_DEFINE_ENUM(NFSERR_XDEV); @@ -52,7 +51,6 @@ TRACE_DEFINE_ENUM(NFSERR_JUKEBOX); { NFSERR_NXIO, "NXIO" }, \ { ECHILD, "CHILD" }, \ { ETIMEDOUT, "TIMEDOUT" }, \ - { NFSERR_EAGAIN, "AGAIN" }, \ { NFSERR_ACCES, "ACCES" }, \ { NFSERR_EXIST, "EXIST" }, \ { NFSERR_XDEV, "XDEV" }, \ diff --git a/include/uapi/linux/nfs.h b/include/uapi/linux/nfs.h index f356f2ba3814..71c7196d3281 100644 --- a/include/uapi/linux/nfs.h +++ b/include/uapi/linux/nfs.h @@ -49,7 +49,6 @@ NFSERR_NOENT = 2, /* v2 v3 v4 */ NFSERR_IO = 5, /* v2 v3 v4 */ NFSERR_NXIO = 6, /* v2 v3 v4 */ - NFSERR_EAGAIN = 11, /* v2 v3 */ NFSERR_ACCES = 13, /* v2 v3 v4 */ NFSERR_EXIST = 17, /* v2 v3 v4 */ NFSERR_XDEV = 18, /* v3 v4 */ From e901c7fce59e72d9f3c92733c379849c4034ac50 Mon Sep 17 00:00:00 2001 From: Scott Mayhew Date: Thu, 11 Dec 2025 07:34:34 -0500 Subject: [PATCH 104/283] NFSD: Fix permission check for read access to executable-only files Commit abc02e5602f7 ("NFSD: Support write delegations in LAYOUTGET") added NFSD_MAY_OWNER_OVERRIDE to the access flags passed from nfsd4_layoutget() to fh_verify(). This causes LAYOUTGET to fail for executable-only files, and causes xfstests generic/126 to fail on pNFS SCSI. To allow read access to executable-only files, what we really want is: 1. The "permissions" portion of the access flags (the lower 6 bits) must be exactly NFSD_MAY_READ 2. The "hints" portion of the access flags (the upper 26 bits) can contain any combination of NFSD_MAY_OWNER_OVERRIDE and NFSD_MAY_READ_IF_EXEC Fixes: abc02e5602f7 ("NFSD: Support write delegations in LAYOUTGET") Cc: stable@vger.kernel.org # v6.6+ Signed-off-by: Scott Mayhew Reviewed-by: Jeff Layton Reviewed-by: NeilBrown Signed-off-by: Chuck Lever --- fs/nfsd/vfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index ab46301da4ae..32ee753de980 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -2906,8 +2906,8 @@ nfsd_permission(struct svc_cred *cred, struct svc_export *exp, /* Allow read access to binaries even when mode 111 */ if (err == -EACCES && S_ISREG(inode->i_mode) && - (acc == (NFSD_MAY_READ | NFSD_MAY_OWNER_OVERRIDE) || - acc == (NFSD_MAY_READ | NFSD_MAY_READ_IF_EXEC))) + (((acc & NFSD_MAY_MASK) == NFSD_MAY_READ) && + (acc & (NFSD_MAY_OWNER_OVERRIDE | NFSD_MAY_READ_IF_EXEC)))) err = inode_permission(&nop_mnt_idmap, inode, MAY_EXEC); return err? nfserrno(err) : 0; From 2857bd59feb63fcf40fe4baf55401baea6b4feb4 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Sat, 13 Dec 2025 13:41:59 -0500 Subject: [PATCH 105/283] nfsd: provide locking for v4_end_grace Writing to v4_end_grace can race with server shutdown and result in memory being accessed after it was freed - reclaim_str_hashtbl in particularly. We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is held while client_tracking_op->init() is called and that can wait for an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a deadlock. nfsd4_end_grace() is also called by the landromat work queue and this doesn't require locking as server shutdown will stop the work and wait for it before freeing anything that nfsd4_end_grace() might access. However, we must be sure that writing to v4_end_grace doesn't restart the work item after shutdown has already waited for it. For this we add a new flag protected with nn->client_lock. It is set only while it is safe to make client tracking calls, and v4_end_grace only schedules work while the flag is set with the spinlock held. So this patch adds a nfsd_net field "client_tracking_active" which is set as described. Another field "grace_end_forced", is set when v4_end_grace is written. After this is set, and providing client_tracking_active is set, the laundromat is scheduled. This "grace_end_forced" field bypasses other checks for whether the grace period has finished. This resolves a race which can result in use-after-free. Reported-by: Li Lingfeng Closes: https://lore.kernel.org/linux-nfs/20250623030015.2353515-1-neil@brown.name/T/#t Fixes: 7f5ef2e900d9 ("nfsd: add a v4_end_grace file to /proc/fs/nfsd") Cc: stable@vger.kernel.org Signed-off-by: NeilBrown Tested-by: Li Lingfeng Reviewed-by: Jeff Layton Signed-off-by: Chuck Lever --- fs/nfsd/netns.h | 2 ++ fs/nfsd/nfs4state.c | 42 ++++++++++++++++++++++++++++++++++++++++-- fs/nfsd/nfsctl.c | 3 +-- fs/nfsd/state.h | 2 +- 4 files changed, 44 insertions(+), 5 deletions(-) diff --git a/fs/nfsd/netns.h b/fs/nfsd/netns.h index 3e2d0fde80a7..fe8338735e7c 100644 --- a/fs/nfsd/netns.h +++ b/fs/nfsd/netns.h @@ -66,6 +66,8 @@ struct nfsd_net { struct lock_manager nfsd4_manager; bool grace_ended; + bool grace_end_forced; + bool client_tracking_active; time64_t boot_time; struct dentry *nfsd_client_dir; diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 5b83cb33bf83..a1dccce8b99c 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -84,7 +84,7 @@ static u64 current_sessionid = 1; /* forward declarations */ static bool check_for_locks(struct nfs4_file *fp, struct nfs4_lockowner *lowner); static void nfs4_free_ol_stateid(struct nfs4_stid *stid); -void nfsd4_end_grace(struct nfsd_net *nn); +static void nfsd4_end_grace(struct nfsd_net *nn); static void _free_cpntf_state_locked(struct nfsd_net *nn, struct nfs4_cpntf_state *cps); static void nfsd4_file_hash_remove(struct nfs4_file *fi); static void deleg_reaper(struct nfsd_net *nn); @@ -6570,7 +6570,7 @@ nfsd4_renew(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, return nfs_ok; } -void +static void nfsd4_end_grace(struct nfsd_net *nn) { /* do nothing if grace period already ended */ @@ -6603,6 +6603,33 @@ nfsd4_end_grace(struct nfsd_net *nn) */ } +/** + * nfsd4_force_end_grace - forcibly end the NFSv4 grace period + * @nn: network namespace for the server instance to be updated + * + * Forces bypass of normal grace period completion, then schedules + * the laundromat to end the grace period immediately. Does not wait + * for the grace period to fully terminate before returning. + * + * Return values: + * %true: Grace termination schedule + * %false: No action was taken + */ +bool nfsd4_force_end_grace(struct nfsd_net *nn) +{ + if (!nn->client_tracking_ops) + return false; + spin_lock(&nn->client_lock); + if (nn->grace_ended || !nn->client_tracking_active) { + spin_unlock(&nn->client_lock); + return false; + } + WRITE_ONCE(nn->grace_end_forced, true); + mod_delayed_work(laundry_wq, &nn->laundromat_work, 0); + spin_unlock(&nn->client_lock); + return true; +} + /* * If we've waited a lease period but there are still clients trying to * reclaim, wait a little longer to give them a chance to finish. @@ -6612,6 +6639,8 @@ static bool clients_still_reclaiming(struct nfsd_net *nn) time64_t double_grace_period_end = nn->boot_time + 2 * nn->nfsd4_lease; + if (READ_ONCE(nn->grace_end_forced)) + return false; if (nn->track_reclaim_completes && atomic_read(&nn->nr_reclaim_complete) == nn->reclaim_str_hashtbl_size) @@ -8931,6 +8960,8 @@ static int nfs4_state_create_net(struct net *net) nn->unconf_name_tree = RB_ROOT; nn->boot_time = ktime_get_real_seconds(); nn->grace_ended = false; + nn->grace_end_forced = false; + nn->client_tracking_active = false; nn->nfsd4_manager.block_opens = true; INIT_LIST_HEAD(&nn->nfsd4_manager.list); INIT_LIST_HEAD(&nn->client_lru); @@ -9011,6 +9042,10 @@ nfs4_state_start_net(struct net *net) return ret; locks_start_grace(net, &nn->nfsd4_manager); nfsd4_client_tracking_init(net); + /* safe for laundromat to run now */ + spin_lock(&nn->client_lock); + nn->client_tracking_active = true; + spin_unlock(&nn->client_lock); if (nn->track_reclaim_completes && nn->reclaim_str_hashtbl_size == 0) goto skip_grace; printk(KERN_INFO "NFSD: starting %lld-second grace period (net %x)\n", @@ -9059,6 +9094,9 @@ nfs4_state_shutdown_net(struct net *net) shrinker_free(nn->nfsd_client_shrinker); cancel_work_sync(&nn->nfsd_shrinker_work); + spin_lock(&nn->client_lock); + nn->client_tracking_active = false; + spin_unlock(&nn->client_lock); cancel_delayed_work_sync(&nn->laundromat_work); locks_end_grace(&nn->nfsd4_manager); diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index 2b79129703d5..36ce3ca97d97 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -1082,10 +1082,9 @@ static ssize_t write_v4_end_grace(struct file *file, char *buf, size_t size) case 'Y': case 'y': case '1': - if (!nn->nfsd_serv) + if (!nfsd4_force_end_grace(nn)) return -EBUSY; trace_nfsd_end_grace(netns(file)); - nfsd4_end_grace(nn); break; default: return -EINVAL; diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index 1e736f402426..50d2b2963390 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -849,7 +849,7 @@ static inline void nfsd4_revoke_states(struct net *net, struct super_block *sb) #endif /* grace period management */ -void nfsd4_end_grace(struct nfsd_net *nn); +bool nfsd4_force_end_grace(struct nfsd_net *nn); /* nfs4recover operations */ extern int nfsd4_client_tracking_init(struct net *net); From fb321998de7639f1954430674475e469fb529d9c Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Mon, 15 Dec 2025 08:07:28 +1100 Subject: [PATCH 106/283] nfsd: use correct loop termination in nfsd4_revoke_states() The loop in nfsd4_revoke_states() stops one too early because the end value given is CLIENT_HASH_MASK where it should be CLIENT_HASH_SIZE. This means that an admin request to drop all locks for a filesystem will miss locks held by clients which hash to the maximum possible hash value. Fixes: 1ac3629bf012 ("nfsd: prepare for supporting admin-revocation of state") Cc: stable@vger.kernel.org Signed-off-by: NeilBrown Reviewed-by: Jeff Layton Signed-off-by: Chuck Lever --- fs/nfsd/nfs4state.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index a1dccce8b99c..18b3688e0f19 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -1780,7 +1780,7 @@ void nfsd4_revoke_states(struct net *net, struct super_block *sb) sc_types = SC_TYPE_OPEN | SC_TYPE_LOCK | SC_TYPE_DELEG | SC_TYPE_LAYOUT; spin_lock(&nn->client_lock); - for (idhashval = 0; idhashval < CLIENT_HASH_MASK; idhashval++) { + for (idhashval = 0; idhashval < CLIENT_HASH_SIZE; idhashval++) { struct list_head *head = &nn->conf_id_hashtbl[idhashval]; struct nfs4_client *clp; retry: From d0424066fcd294977f310964bed6f2a487fa4515 Mon Sep 17 00:00:00 2001 From: Olga Kornievskaia Date: Mon, 15 Dec 2025 14:10:36 -0500 Subject: [PATCH 107/283] nfsd: check that server is running in unlock_filesystem If we are trying to unlock the filesystem via an administrative interface and nfsd isn't running, it crashes the server. This happens currently because nfsd4_revoke_states() access state structures (eg., conf_id_hashtbl) that has been freed as a part of the server shutdown. [ 59.465072] Call trace: [ 59.465308] nfsd4_revoke_states+0x1b4/0x898 [nfsd] (P) [ 59.465830] write_unlock_fs+0x258/0x440 [nfsd] [ 59.466278] nfsctl_transaction_write+0xb0/0x120 [nfsd] [ 59.466780] vfs_write+0x1f0/0x938 [ 59.467088] ksys_write+0xfc/0x1f8 [ 59.467395] __arm64_sys_write+0x74/0xb8 [ 59.467746] invoke_syscall.constprop.0+0xdc/0x1e8 [ 59.468177] do_el0_svc+0x154/0x1d8 [ 59.468489] el0_svc+0x40/0xe0 [ 59.468767] el0t_64_sync_handler+0xa0/0xe8 [ 59.469138] el0t_64_sync+0x1ac/0x1b0 Ensure this can't happen by taking the nfsd_mutex and checking that the server is still up, and then holding the mutex across the call to nfsd4_revoke_states(). Reviewed-by: NeilBrown Reviewed-by: Jeff Layton Fixes: 1ac3629bf0125 ("nfsd: prepare for supporting admin-revocation of state") Cc: stable@vger.kernel.org Signed-off-by: Olga Kornievskaia Signed-off-by: Chuck Lever --- fs/nfsd/nfs4state.c | 5 ++--- fs/nfsd/nfsctl.c | 9 ++++++++- fs/nfsd/state.h | 4 ++-- 3 files changed, 12 insertions(+), 6 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 18b3688e0f19..ac9b31d96fc1 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -1759,7 +1759,7 @@ static struct nfs4_stid *find_one_sb_stid(struct nfs4_client *clp, /** * nfsd4_revoke_states - revoke all nfsv4 states associated with given filesystem - * @net: used to identify instance of nfsd (there is one per net namespace) + * @nn: used to identify instance of nfsd (there is one per net namespace) * @sb: super_block used to identify target filesystem * * All nfs4 states (open, lock, delegation, layout) held by the server instance @@ -1771,9 +1771,8 @@ static struct nfs4_stid *find_one_sb_stid(struct nfs4_client *clp, * The clients which own the states will subsequently being notified that the * states have been "admin-revoked". */ -void nfsd4_revoke_states(struct net *net, struct super_block *sb) +void nfsd4_revoke_states(struct nfsd_net *nn, struct super_block *sb) { - struct nfsd_net *nn = net_generic(net, nfsd_net_id); unsigned int idhashval; unsigned int sc_types; diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c index 36ce3ca97d97..8cbfb9dc3abb 100644 --- a/fs/nfsd/nfsctl.c +++ b/fs/nfsd/nfsctl.c @@ -259,6 +259,7 @@ static ssize_t write_unlock_fs(struct file *file, char *buf, size_t size) struct path path; char *fo_path; int error; + struct nfsd_net *nn; /* sanity check */ if (size == 0) @@ -285,7 +286,13 @@ static ssize_t write_unlock_fs(struct file *file, char *buf, size_t size) * 3. Is that directory the root of an exported file system? */ error = nlmsvc_unlock_all_by_sb(path.dentry->d_sb); - nfsd4_revoke_states(netns(file), path.dentry->d_sb); + mutex_lock(&nfsd_mutex); + nn = net_generic(netns(file), nfsd_net_id); + if (nn->nfsd_serv) + nfsd4_revoke_states(nn, path.dentry->d_sb); + else + error = -EINVAL; + mutex_unlock(&nfsd_mutex); path_put(&path); return error; diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index 50d2b2963390..c75bf3abec40 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -841,9 +841,9 @@ static inline void get_nfs4_file(struct nfs4_file *fi) struct nfsd_file *find_any_file(struct nfs4_file *f); #ifdef CONFIG_NFSD_V4 -void nfsd4_revoke_states(struct net *net, struct super_block *sb); +void nfsd4_revoke_states(struct nfsd_net *nn, struct super_block *sb); #else -static inline void nfsd4_revoke_states(struct net *net, struct super_block *sb) +static inline void nfsd4_revoke_states(struct nfsd_net *nn, struct super_block *sb) { } #endif From 0b88bfa42e5468baff71909c2f324a495318532b Mon Sep 17 00:00:00 2001 From: Edward Adam Davis Date: Tue, 16 Dec 2025 18:27:37 +0800 Subject: [PATCH 108/283] NFSD: net ref data still needs to be freed even if net hasn't startup When the NFSD instance doesn't to startup, the net ref data memory is not properly reclaimed, which triggers the memory leak issue reported by syzbot [1]. To avoid the problem reported in [1], the net ref data memory reclamation action is moved outside of nfsd_net_up when the net is shutdown. [1] unreferenced object 0xffff88812a39dfc0 (size 64): backtrace (crc a2262fc6): percpu_ref_init+0x94/0x1e0 lib/percpu-refcount.c:76 nfsd_create_serv+0xbe/0x260 fs/nfsd/nfssvc.c:605 nfsd_nl_listener_set_doit+0x62/0xb00 fs/nfsd/nfsctl.c:1882 genl_family_rcv_msg_doit+0x11e/0x190 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x2fd/0x440 net/netlink/genetlink.c:1210 BUG: memory leak Reported-by: syzbot+6ee3b889bdeada0a6226@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6ee3b889bdeada0a6226 Fixes: 39972494e318 ("nfsd: update percpu_ref to manage references on nfsd_net") Cc: stable@vger.kernel.org Signed-off-by: Edward Adam Davis Signed-off-by: Chuck Lever --- fs/nfsd/nfssvc.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c index f6cae4430ba4..f1cc223ecee2 100644 --- a/fs/nfsd/nfssvc.c +++ b/fs/nfsd/nfssvc.c @@ -406,26 +406,26 @@ static void nfsd_shutdown_net(struct net *net) { struct nfsd_net *nn = net_generic(net, nfsd_net_id); - if (!nn->nfsd_net_up) - return; + if (nn->nfsd_net_up) { + percpu_ref_kill_and_confirm(&nn->nfsd_net_ref, nfsd_net_done); + wait_for_completion(&nn->nfsd_net_confirm_done); - percpu_ref_kill_and_confirm(&nn->nfsd_net_ref, nfsd_net_done); - wait_for_completion(&nn->nfsd_net_confirm_done); - - nfsd_export_flush(net); - nfs4_state_shutdown_net(net); - nfsd_reply_cache_shutdown(nn); - nfsd_file_cache_shutdown_net(net); - if (nn->lockd_up) { - lockd_down(net); - nn->lockd_up = false; + nfsd_export_flush(net); + nfs4_state_shutdown_net(net); + nfsd_reply_cache_shutdown(nn); + nfsd_file_cache_shutdown_net(net); + if (nn->lockd_up) { + lockd_down(net); + nn->lockd_up = false; + } + wait_for_completion(&nn->nfsd_net_free_done); } - wait_for_completion(&nn->nfsd_net_free_done); percpu_ref_exit(&nn->nfsd_net_ref); + if (nn->nfsd_net_up) + nfsd_shutdown_generic(); nn->nfsd_net_up = false; - nfsd_shutdown_generic(); } static DEFINE_SPINLOCK(nfsd_notifier_lock); From 235a1eb8d2dcc49a6cf0a5ee1aa85544a5d0054b Mon Sep 17 00:00:00 2001 From: Zilin Guan Date: Wed, 31 Dec 2025 11:49:15 +0000 Subject: [PATCH 109/283] of: unittest: Fix memory leak in unittest_data_add() In unittest_data_add(), if of_resolve_phandles() fails, the allocated unittest_data is not freed, leading to a memory leak. Fix this by using scope-based cleanup helper __free(kfree) for automatic resource cleanup. This ensures unittest_data is automatically freed when it goes out of scope in error paths. For the success path, use retain_and_null_ptr() to transfer ownership of the memory to the device tree and prevent double freeing. Fixes: 2eb46da2a760 ("of/selftest: Use the resolver to fixup phandles") Suggested-by: Rob Herring Co-developed-by: Jianhao Xu Signed-off-by: Jianhao Xu Signed-off-by: Zilin Guan Link: https://patch.msgid.link/20251231114915.234638-1-zilin@seu.edu.cn Signed-off-by: Rob Herring (Arm) --- drivers/of/unittest.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index 388e9ec2cccf..3b773aaf9d05 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -1985,7 +1985,6 @@ static void attach_node_and_children(struct device_node *np) */ static int __init unittest_data_add(void) { - void *unittest_data; void *unittest_data_align; struct device_node *unittest_data_node = NULL, *np; /* @@ -2004,7 +2003,7 @@ static int __init unittest_data_add(void) } /* creating copy */ - unittest_data = kmalloc(size + FDT_ALIGN_SIZE, GFP_KERNEL); + void *unittest_data __free(kfree) = kmalloc(size + FDT_ALIGN_SIZE, GFP_KERNEL); if (!unittest_data) return -ENOMEM; @@ -2014,12 +2013,10 @@ static int __init unittest_data_add(void) ret = of_fdt_unflatten_tree(unittest_data_align, NULL, &unittest_data_node); if (!ret) { pr_warn("%s: unflatten testcases tree failed\n", __func__); - kfree(unittest_data); return -ENODATA; } if (!unittest_data_node) { pr_warn("%s: testcases tree is empty\n", __func__); - kfree(unittest_data); return -ENODATA; } @@ -2038,7 +2035,6 @@ static int __init unittest_data_add(void) /* attach the sub-tree to live tree */ if (!of_root) { pr_warn("%s: no live tree to attach sub-tree\n", __func__); - kfree(unittest_data); rc = -ENODEV; goto unlock; } @@ -2059,6 +2055,8 @@ static int __init unittest_data_add(void) EXPECT_END(KERN_INFO, "Duplicate name in testcase-data, renamed to \"duplicate-name#1\""); + retain_and_null_ptr(unittest_data); + unlock: of_overlay_mutex_unlock(); From c1ef9a6cabb34dbc09e31417b0c0a672fe0de13a Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 5 Dec 2025 11:51:48 +0200 Subject: [PATCH 110/283] Revert "drm/atomic-helper: Re-order bridge chain pre-enable and post-disable" This reverts commit c9b1150a68d9362a0827609fc0dc1664c0d8bfe1. Changing the enable/disable sequence has caused regressions on multiple platforms: R-Car, MCDE, Rockchip. A series (see link below) was sent to fix these, but it was decided that it's better to revert the original patch and change the enable/disable sequence only in the tidss driver. Reverting this commit breaks tidss's DSI and OLDI outputs, which will be fixed in the following commits. Signed-off-by: Tomi Valkeinen Link: https://lore.kernel.org/all/20251202-mcde-drm-regression-thirdfix-v6-0-f1bffd4ec0fa%40kernel.org/ Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable") Cc: stable@vger.kernel.org # v6.17+ Reviewed-by: Aradhya Bhatia Reviewed-by: Maxime Ripard Reviewed-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-1-fda68fa1b3de@ideasonboard.com --- drivers/gpu/drm/drm_atomic_helper.c | 8 +- include/drm/drm_bridge.h | 249 ++++++++-------------------- 2 files changed, 70 insertions(+), 187 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 10adac9397cf..ef97f37560b2 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1341,9 +1341,9 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { encoder_bridge_disable(dev, state); - crtc_disable(dev, state); - encoder_bridge_post_disable(dev, state); + + crtc_disable(dev, state); } /** @@ -1682,10 +1682,10 @@ encoder_bridge_enable(struct drm_device *dev, struct drm_atomic_state *state) void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { - encoder_bridge_pre_enable(dev, state); - crtc_enable(dev, state); + encoder_bridge_pre_enable(dev, state); + encoder_bridge_enable(dev, state); drm_atomic_helper_commit_writebacks(dev, state); diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h index 0ff7ab4aa868..dbafe136833f 100644 --- a/include/drm/drm_bridge.h +++ b/include/drm/drm_bridge.h @@ -176,33 +176,17 @@ struct drm_bridge_funcs { /** * @disable: * - * The @disable callback should disable the bridge. + * This callback should disable the bridge. It is called right before + * the preceding element in the display pipe is disabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @disable vfunc. If the preceding element is a &drm_encoder + * it's called right before the &drm_encoder_helper_funcs.disable, + * &drm_encoder_helper_funcs.prepare or &drm_encoder_helper_funcs.dpms + * hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is still running when this callback is called. * - * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is disabled via one of: - * - * - &drm_bridge_funcs.disable - * - &drm_bridge_funcs.atomic_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms. - * * The @disable callback is optional. * * NOTE: @@ -215,34 +199,17 @@ struct drm_bridge_funcs { /** * @post_disable: * + * This callback should disable the bridge. It is called right after the + * preceding element in the display pipe is disabled. If the preceding + * element is a bridge this means it's called after that bridge's + * @post_disable function. If the preceding element is a &drm_encoder + * it's called right after the encoder's + * &drm_encoder_helper_funcs.disable, &drm_encoder_helper_funcs.prepare + * or &drm_encoder_helper_funcs.dpms hook. + * * The bridge must assume that the display pipe (i.e. clocks and timing - * signals) feeding this bridge is no longer running when the - * @post_disable is called. - * - * This callback should perform all the actions required by the hardware - * after it has stopped receiving signals from the preceding element. - * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is post-disabled (unless marked otherwise by the - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.post_disable - * - &drm_bridge_funcs.atomic_post_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms + * signals) feeding it is no longer running when this callback is + * called. * * The @post_disable callback is optional. * @@ -285,30 +252,18 @@ struct drm_bridge_funcs { /** * @pre_enable: * + * This callback should enable the bridge. It is called right before + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @pre_enable function. If the preceding element is a + * &drm_encoder it's called right before the encoder's + * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or + * &drm_encoder_helper_funcs.dpms hook. + * * The display pipe (i.e. clocks and timing signals) feeding this bridge - * will not yet be running when the @pre_enable is called. - * - * This callback should perform all the necessary actions to prepare the - * bridge to accept signals from the preceding element. - * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is pre-enabled (unless marked otherwise by - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.pre_enable - * - &drm_bridge_funcs.atomic_pre_enable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - &drm_encoder_helper_funcs.commit + * will not yet be running when this callback is called. The bridge must + * not enable the display link feeding the next bridge in the chain (if + * there is one) when this callback is called. * * The @pre_enable callback is optional. * @@ -322,31 +277,19 @@ struct drm_bridge_funcs { /** * @enable: * - * The @enable callback should enable the bridge. + * This callback should enable the bridge. It is called right after + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called after that + * bridge's @enable function. If the preceding element is a + * &drm_encoder it's called right after the encoder's + * &drm_encoder_helper_funcs.enable, &drm_encoder_helper_funcs.commit or + * &drm_encoder_helper_funcs.dpms hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is running when this callback is called. This * callback must enable the display link feeding the next bridge in the * chain if there is one. * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is enabled via one of: - * - * - &drm_bridge_funcs.enable - * - &drm_bridge_funcs.atomic_enable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - drm_encoder_helper_funcs.commit - * * The @enable callback is optional. * * NOTE: @@ -359,30 +302,17 @@ struct drm_bridge_funcs { /** * @atomic_pre_enable: * + * This callback should enable the bridge. It is called right before + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @atomic_pre_enable or @pre_enable function. If the preceding + * element is a &drm_encoder it's called right before the encoder's + * &drm_encoder_helper_funcs.atomic_enable hook. + * * The display pipe (i.e. clocks and timing signals) feeding this bridge - * will not yet be running when the @atomic_pre_enable is called. - * - * This callback should perform all the necessary actions to prepare the - * bridge to accept signals from the preceding element. - * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is pre-enabled (unless marked otherwise by - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.pre_enable - * - &drm_bridge_funcs.atomic_pre_enable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - &drm_encoder_helper_funcs.commit + * will not yet be running when this callback is called. The bridge must + * not enable the display link feeding the next bridge in the chain (if + * there is one) when this callback is called. * * The @atomic_pre_enable callback is optional. */ @@ -392,31 +322,18 @@ struct drm_bridge_funcs { /** * @atomic_enable: * - * The @atomic_enable callback should enable the bridge. + * This callback should enable the bridge. It is called right after + * the preceding element in the display pipe is enabled. If the + * preceding element is a bridge this means it's called after that + * bridge's @atomic_enable or @enable function. If the preceding element + * is a &drm_encoder it's called right after the encoder's + * &drm_encoder_helper_funcs.atomic_enable hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is running when this callback is called. This * callback must enable the display link feeding the next bridge in the * chain if there is one. * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is enabled via one of: - * - * - &drm_bridge_funcs.enable - * - &drm_bridge_funcs.atomic_enable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the CRTC is enabled via one of: - * - * - &drm_crtc_helper_funcs.atomic_enable - * - &drm_crtc_helper_funcs.commit - * - * and the encoder is enabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_enable - * - &drm_encoder_helper_funcs.enable - * - drm_encoder_helper_funcs.commit - * * The @atomic_enable callback is optional. */ void (*atomic_enable)(struct drm_bridge *bridge, @@ -424,32 +341,16 @@ struct drm_bridge_funcs { /** * @atomic_disable: * - * The @atomic_disable callback should disable the bridge. + * This callback should disable the bridge. It is called right before + * the preceding element in the display pipe is disabled. If the + * preceding element is a bridge this means it's called before that + * bridge's @atomic_disable or @disable vfunc. If the preceding element + * is a &drm_encoder it's called right before the + * &drm_encoder_helper_funcs.atomic_disable hook. * * The bridge can assume that the display pipe (i.e. clocks and timing * signals) feeding it is still running when this callback is called. * - * If the preceding element is a &drm_bridge, then this is called before - * that bridge is disabled via one of: - * - * - &drm_bridge_funcs.disable - * - &drm_bridge_funcs.atomic_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called before the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms. - * * The @atomic_disable callback is optional. */ void (*atomic_disable)(struct drm_bridge *bridge, @@ -458,34 +359,16 @@ struct drm_bridge_funcs { /** * @atomic_post_disable: * + * This callback should disable the bridge. It is called right after the + * preceding element in the display pipe is disabled. If the preceding + * element is a bridge this means it's called after that bridge's + * @atomic_post_disable or @post_disable function. If the preceding + * element is a &drm_encoder it's called right after the encoder's + * &drm_encoder_helper_funcs.atomic_disable hook. + * * The bridge must assume that the display pipe (i.e. clocks and timing - * signals) feeding this bridge is no longer running when the - * @atomic_post_disable is called. - * - * This callback should perform all the actions required by the hardware - * after it has stopped receiving signals from the preceding element. - * - * If the preceding element is a &drm_bridge, then this is called after - * that bridge is post-disabled (unless marked otherwise by the - * @pre_enable_prev_first flag) via one of: - * - * - &drm_bridge_funcs.post_disable - * - &drm_bridge_funcs.atomic_post_disable - * - * If the preceding element of the bridge is a display controller, then - * this callback is called after the encoder is disabled via one of: - * - * - &drm_encoder_helper_funcs.atomic_disable - * - &drm_encoder_helper_funcs.prepare - * - &drm_encoder_helper_funcs.disable - * - &drm_encoder_helper_funcs.dpms - * - * and the CRTC is disabled via one of: - * - * - &drm_crtc_helper_funcs.prepare - * - &drm_crtc_helper_funcs.atomic_disable - * - &drm_crtc_helper_funcs.disable - * - &drm_crtc_helper_funcs.dpms + * signals) feeding it is no longer running when this callback is + * called. * * The @atomic_post_disable callback is optional. */ From 33e8150bd32d7dc25c977bb455f1f5d54bfd5241 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 5 Dec 2025 11:51:49 +0200 Subject: [PATCH 111/283] Revert "drm/mediatek: dsi: Fix DSI host and panel bridge pre-enable order" This reverts commit f5b1819193667bf62c3c99d3921b9429997a14b2. As the original commit (c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")) causing the issue has been reverted, let's revert the fix for mediatek. Signed-off-by: Tomi Valkeinen Cc: stable@vger.kernel.org # v6.17+ Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable") Reviewed-by: Maxime Ripard Reviewed-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-2-fda68fa1b3de@ideasonboard.com --- drivers/gpu/drm/mediatek/mtk_dsi.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index 0e2bcd5f67b7..d7726091819c 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -1002,12 +1002,6 @@ static int mtk_dsi_host_attach(struct mipi_dsi_host *host, return PTR_ERR(dsi->next_bridge); } - /* - * set flag to request the DSI host bridge be pre-enabled before device bridge - * in the chain, so the DSI host is ready when the device bridge is pre-enabled - */ - dsi->next_bridge->pre_enable_prev_first = true; - drm_bridge_add(&dsi->bridge); ret = component_add(host->dev, &mtk_dsi_component_ops); From d1c7dc57ff2400b141e6582a8d2dc5170108cf81 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 5 Dec 2025 11:51:50 +0200 Subject: [PATCH 112/283] drm/atomic-helper: Export and namespace some functions Export and namespace those not prefixed with drm_* so it becomes possible to write custom commit tail functions in individual drivers using the helper infrastructure. Tested-by: Marek Vasut Reviewed-by: Maxime Ripard Signed-off-by: Tomi Valkeinen Cc: stable@vger.kernel.org # v6.17+ Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable") Reviewed-by: Aradhya Bhatia Reviewed-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-3-fda68fa1b3de@ideasonboard.com --- drivers/gpu/drm/drm_atomic_helper.c | 122 ++++++++++++++++++++++------ include/drm/drm_atomic_helper.h | 22 +++++ 2 files changed, 121 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index ef97f37560b2..5beea645035f 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1162,8 +1162,18 @@ crtc_needs_disable(struct drm_crtc_state *old_state, new_state->self_refresh_active; } -static void -encoder_bridge_disable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_encoder_bridge_disable - disable bridges and encoder + * @dev: DRM device + * @state: the driver state object + * + * Loops over all connectors in the current state and if the CRTC needs + * it, disables the bridge chain all the way, then disables the encoder + * afterwards. + */ +void +drm_atomic_helper_commit_encoder_bridge_disable(struct drm_device *dev, + struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *old_conn_state, *new_conn_state; @@ -1229,9 +1239,18 @@ encoder_bridge_disable(struct drm_device *dev, struct drm_atomic_state *state) } } } +EXPORT_SYMBOL(drm_atomic_helper_commit_encoder_bridge_disable); -static void -crtc_disable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_crtc_disable - disable CRTSs + * @dev: DRM device + * @state: the driver state object + * + * Loops over all CRTCs in the current state and if the CRTC needs + * it, disables it. + */ +void +drm_atomic_helper_commit_crtc_disable(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state, *new_crtc_state; @@ -1282,9 +1301,18 @@ crtc_disable(struct drm_device *dev, struct drm_atomic_state *state) drm_crtc_vblank_put(crtc); } } +EXPORT_SYMBOL(drm_atomic_helper_commit_crtc_disable); -static void -encoder_bridge_post_disable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_encoder_bridge_post_disable - post-disable encoder bridges + * @dev: DRM device + * @state: the driver state object + * + * Loops over all connectors in the current state and if the CRTC needs + * it, post-disables all encoder bridges. + */ +void +drm_atomic_helper_commit_encoder_bridge_post_disable(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *old_conn_state, *new_conn_state; @@ -1335,15 +1363,16 @@ encoder_bridge_post_disable(struct drm_device *dev, struct drm_atomic_state *sta drm_bridge_put(bridge); } } +EXPORT_SYMBOL(drm_atomic_helper_commit_encoder_bridge_post_disable); static void disable_outputs(struct drm_device *dev, struct drm_atomic_state *state) { - encoder_bridge_disable(dev, state); + drm_atomic_helper_commit_encoder_bridge_disable(dev, state); - encoder_bridge_post_disable(dev, state); + drm_atomic_helper_commit_encoder_bridge_post_disable(dev, state); - crtc_disable(dev, state); + drm_atomic_helper_commit_crtc_disable(dev, state); } /** @@ -1446,8 +1475,17 @@ void drm_atomic_helper_calc_timestamping_constants(struct drm_atomic_state *stat } EXPORT_SYMBOL(drm_atomic_helper_calc_timestamping_constants); -static void -crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_crtc_set_mode - set the new mode + * @dev: DRM device + * @state: the driver state object + * + * Loops over all connectors in the current state and if the mode has + * changed, change the mode of the CRTC, then call down the bridge + * chain and change the mode in all bridges as well. + */ +void +drm_atomic_helper_commit_crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_crtc *crtc; struct drm_crtc_state *new_crtc_state; @@ -1508,6 +1546,7 @@ crtc_set_mode(struct drm_device *dev, struct drm_atomic_state *state) drm_bridge_put(bridge); } } +EXPORT_SYMBOL(drm_atomic_helper_commit_crtc_set_mode); /** * drm_atomic_helper_commit_modeset_disables - modeset commit to disable outputs @@ -1531,12 +1570,21 @@ void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev, drm_atomic_helper_update_legacy_modeset_state(dev, state); drm_atomic_helper_calc_timestamping_constants(state); - crtc_set_mode(dev, state); + drm_atomic_helper_commit_crtc_set_mode(dev, state); } EXPORT_SYMBOL(drm_atomic_helper_commit_modeset_disables); -static void drm_atomic_helper_commit_writebacks(struct drm_device *dev, - struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_writebacks - issue writebacks + * @dev: DRM device + * @state: atomic state object being committed + * + * This loops over the connectors, checks if the new state requires + * a writeback job to be issued and in that case issues an atomic + * commit on each connector. + */ +void drm_atomic_helper_commit_writebacks(struct drm_device *dev, + struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *new_conn_state; @@ -1555,9 +1603,18 @@ static void drm_atomic_helper_commit_writebacks(struct drm_device *dev, } } } +EXPORT_SYMBOL(drm_atomic_helper_commit_writebacks); -static void -encoder_bridge_pre_enable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_encoder_bridge_pre_enable - pre-enable bridges + * @dev: DRM device + * @state: atomic state object being committed + * + * This loops over the connectors and if the CRTC needs it, pre-enables + * the entire bridge chain. + */ +void +drm_atomic_helper_commit_encoder_bridge_pre_enable(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *new_conn_state; @@ -1588,9 +1645,18 @@ encoder_bridge_pre_enable(struct drm_device *dev, struct drm_atomic_state *state drm_bridge_put(bridge); } } +EXPORT_SYMBOL(drm_atomic_helper_commit_encoder_bridge_pre_enable); -static void -crtc_enable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_crtc_enable - enables the CRTCs + * @dev: DRM device + * @state: atomic state object being committed + * + * This loops over CRTCs in the new state, and of the CRTC needs + * it, enables it. + */ +void +drm_atomic_helper_commit_crtc_enable(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state; @@ -1619,9 +1685,18 @@ crtc_enable(struct drm_device *dev, struct drm_atomic_state *state) } } } +EXPORT_SYMBOL(drm_atomic_helper_commit_crtc_enable); -static void -encoder_bridge_enable(struct drm_device *dev, struct drm_atomic_state *state) +/** + * drm_atomic_helper_commit_encoder_bridge_enable - enables the bridges + * @dev: DRM device + * @state: atomic state object being committed + * + * This loops over all connectors in the new state, and of the CRTC needs + * it, enables the entire bridge chain. + */ +void +drm_atomic_helper_commit_encoder_bridge_enable(struct drm_device *dev, struct drm_atomic_state *state) { struct drm_connector *connector; struct drm_connector_state *new_conn_state; @@ -1664,6 +1739,7 @@ encoder_bridge_enable(struct drm_device *dev, struct drm_atomic_state *state) drm_bridge_put(bridge); } } +EXPORT_SYMBOL(drm_atomic_helper_commit_encoder_bridge_enable); /** * drm_atomic_helper_commit_modeset_enables - modeset commit to enable outputs @@ -1682,11 +1758,11 @@ encoder_bridge_enable(struct drm_device *dev, struct drm_atomic_state *state) void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state) { - crtc_enable(dev, state); + drm_atomic_helper_commit_crtc_enable(dev, state); - encoder_bridge_pre_enable(dev, state); + drm_atomic_helper_commit_encoder_bridge_pre_enable(dev, state); - encoder_bridge_enable(dev, state); + drm_atomic_helper_commit_encoder_bridge_enable(dev, state); drm_atomic_helper_commit_writebacks(dev, state); } diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h index 53382fe93537..e154ee4f0696 100644 --- a/include/drm/drm_atomic_helper.h +++ b/include/drm/drm_atomic_helper.h @@ -60,6 +60,12 @@ int drm_atomic_helper_check_plane_state(struct drm_plane_state *plane_state, int drm_atomic_helper_check_planes(struct drm_device *dev, struct drm_atomic_state *state); int drm_atomic_helper_check_crtc_primary_plane(struct drm_crtc_state *crtc_state); +void drm_atomic_helper_commit_encoder_bridge_disable(struct drm_device *dev, + struct drm_atomic_state *state); +void drm_atomic_helper_commit_crtc_disable(struct drm_device *dev, + struct drm_atomic_state *state); +void drm_atomic_helper_commit_encoder_bridge_post_disable(struct drm_device *dev, + struct drm_atomic_state *state); int drm_atomic_helper_check(struct drm_device *dev, struct drm_atomic_state *state); void drm_atomic_helper_commit_tail(struct drm_atomic_state *state); @@ -89,8 +95,24 @@ drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev, void drm_atomic_helper_calc_timestamping_constants(struct drm_atomic_state *state); +void drm_atomic_helper_commit_crtc_set_mode(struct drm_device *dev, + struct drm_atomic_state *state); + void drm_atomic_helper_commit_modeset_disables(struct drm_device *dev, struct drm_atomic_state *state); + +void drm_atomic_helper_commit_writebacks(struct drm_device *dev, + struct drm_atomic_state *state); + +void drm_atomic_helper_commit_encoder_bridge_pre_enable(struct drm_device *dev, + struct drm_atomic_state *state); + +void drm_atomic_helper_commit_crtc_enable(struct drm_device *dev, + struct drm_atomic_state *state); + +void drm_atomic_helper_commit_encoder_bridge_enable(struct drm_device *dev, + struct drm_atomic_state *state); + void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *old_state); From 2fc04340cf30d7960eed2525d26ffb8905aca02b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 5 Dec 2025 11:51:51 +0200 Subject: [PATCH 113/283] drm/tidss: Fix enable/disable order TI's OLDI and DSI encoders need to be set up before the crtc is enabled, but the DRM helpers will enable the crtc first. This causes various issues on TI platforms, like visual artifacts or crtc sync lost warnings. Thus drm_atomic_helper_commit_modeset_enables() and drm_atomic_helper_commit_modeset_disables() cannot be used, as they enable the crtc before bridges' pre-enable, and disable the crtc after bridges' post-disable. Open code the drm_atomic_helper_commit_modeset_enables() and drm_atomic_helper_commit_modeset_disables(), and first call the bridges' pre-enables, then crtc enable, then bridges' post-enable (and vice versa for disable). Signed-off-by: Tomi Valkeinen Cc: stable@vger.kernel.org # v6.17+ Fixes: c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable") Reviewed-by: Aradhya Bhatia Reviewed-by: Maxime Ripard Reviewed-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patch.msgid.link/20251205-drm-seq-fix-v1-4-fda68fa1b3de@ideasonboard.com --- drivers/gpu/drm/tidss/tidss_kms.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/tidss/tidss_kms.c b/drivers/gpu/drm/tidss/tidss_kms.c index 86eb5d97410b..8bb93194e5ac 100644 --- a/drivers/gpu/drm/tidss/tidss_kms.c +++ b/drivers/gpu/drm/tidss/tidss_kms.c @@ -26,9 +26,33 @@ static void tidss_atomic_commit_tail(struct drm_atomic_state *old_state) tidss_runtime_get(tidss); - drm_atomic_helper_commit_modeset_disables(ddev, old_state); - drm_atomic_helper_commit_planes(ddev, old_state, DRM_PLANE_COMMIT_ACTIVE_ONLY); - drm_atomic_helper_commit_modeset_enables(ddev, old_state); + /* + * TI's OLDI and DSI encoders need to be set up before the crtc is + * enabled. Thus drm_atomic_helper_commit_modeset_enables() and + * drm_atomic_helper_commit_modeset_disables() cannot be used here, as + * they enable the crtc before bridges' pre-enable, and disable the crtc + * after bridges' post-disable. + * + * Open code the functions here and first call the bridges' pre-enables, + * then crtc enable, then bridges' post-enable (and vice versa for + * disable). + */ + + drm_atomic_helper_commit_encoder_bridge_disable(ddev, old_state); + drm_atomic_helper_commit_crtc_disable(ddev, old_state); + drm_atomic_helper_commit_encoder_bridge_post_disable(ddev, old_state); + + drm_atomic_helper_update_legacy_modeset_state(ddev, old_state); + drm_atomic_helper_calc_timestamping_constants(old_state); + drm_atomic_helper_commit_crtc_set_mode(ddev, old_state); + + drm_atomic_helper_commit_planes(ddev, old_state, + DRM_PLANE_COMMIT_ACTIVE_ONLY); + + drm_atomic_helper_commit_encoder_bridge_pre_enable(ddev, old_state); + drm_atomic_helper_commit_crtc_enable(ddev, old_state); + drm_atomic_helper_commit_encoder_bridge_enable(ddev, old_state); + drm_atomic_helper_commit_writebacks(ddev, old_state); drm_atomic_helper_commit_hw_done(old_state); drm_atomic_helper_wait_for_flip_done(ddev, old_state); From e8b3627bec357698f2d4d6dbf27cdcfa0e9d8715 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 2 Jan 2026 14:18:29 +1000 Subject: [PATCH 114/283] nouveau: don't attempt fwsec on sb on newer platforms. The changes to always loads fwsec sb causes problems on newer GPUs which don't use this path. Add hooks and pass through the device specific layers. Fixes: da67179e5538 ("drm/nouveau/gsp: Allocate fwsec-sb at boot") Cc: # v6.16+ Cc: Lyude Paul Cc: Timur Tabi Tested-by: Matthew Schwartz Tested-by: Christopher Snowhill Reviewed-by: Lyude Paul Signed-off-by: Dave Airlie Link: https://patch.msgid.link/20260102041829.2748009-1-airlied@gmail.com --- .../gpu/drm/nouveau/nvkm/subdev/gsp/ad102.c | 3 +++ .../gpu/drm/nouveau/nvkm/subdev/gsp/fwsec.c | 8 +------ .../gpu/drm/nouveau/nvkm/subdev/gsp/ga100.c | 3 +++ .../gpu/drm/nouveau/nvkm/subdev/gsp/ga102.c | 3 +++ .../gpu/drm/nouveau/nvkm/subdev/gsp/priv.h | 23 +++++++++++++++++-- .../gpu/drm/nouveau/nvkm/subdev/gsp/tu102.c | 15 ++++++++++++ .../gpu/drm/nouveau/nvkm/subdev/gsp/tu116.c | 3 +++ 7 files changed, 49 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ad102.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ad102.c index 35d1fcef520b..c456a9626823 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ad102.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ad102.c @@ -30,6 +30,9 @@ ad102_gsp = { .booter.ctor = ga102_gsp_booter_ctor, + .fwsec_sb.ctor = tu102_gsp_fwsec_sb_ctor, + .fwsec_sb.dtor = tu102_gsp_fwsec_sb_dtor, + .dtor = r535_gsp_dtor, .oneinit = tu102_gsp_oneinit, .init = tu102_gsp_init, diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/fwsec.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/fwsec.c index 503760246660..851140e80122 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/fwsec.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/fwsec.c @@ -337,18 +337,12 @@ nvkm_gsp_fwsec_sb(struct nvkm_gsp *gsp) } int -nvkm_gsp_fwsec_sb_ctor(struct nvkm_gsp *gsp) +nvkm_gsp_fwsec_sb_init(struct nvkm_gsp *gsp) { return nvkm_gsp_fwsec_init(gsp, &gsp->fws.falcon.sb, "fwsec-sb", NVFW_FALCON_APPIF_DMEMMAPPER_CMD_SB); } -void -nvkm_gsp_fwsec_sb_dtor(struct nvkm_gsp *gsp) -{ - nvkm_falcon_fw_dtor(&gsp->fws.falcon.sb); -} - int nvkm_gsp_fwsec_frts(struct nvkm_gsp *gsp) { diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga100.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga100.c index d201e8697226..27a13aeccd3c 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga100.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga100.c @@ -47,6 +47,9 @@ ga100_gsp = { .booter.ctor = tu102_gsp_booter_ctor, + .fwsec_sb.ctor = tu102_gsp_fwsec_sb_ctor, + .fwsec_sb.dtor = tu102_gsp_fwsec_sb_dtor, + .dtor = r535_gsp_dtor, .oneinit = tu102_gsp_oneinit, .init = tu102_gsp_init, diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga102.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga102.c index 917f7e2f6c46..b6b3eb6f4c00 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga102.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/ga102.c @@ -158,6 +158,9 @@ ga102_gsp_r535 = { .booter.ctor = ga102_gsp_booter_ctor, + .fwsec_sb.ctor = tu102_gsp_fwsec_sb_ctor, + .fwsec_sb.dtor = tu102_gsp_fwsec_sb_dtor, + .dtor = r535_gsp_dtor, .oneinit = tu102_gsp_oneinit, .init = tu102_gsp_init, diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/priv.h b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/priv.h index 86bdd203bc10..9dd66a2e3801 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/priv.h +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/priv.h @@ -7,9 +7,8 @@ enum nvkm_acr_lsf_id; int nvkm_gsp_fwsec_frts(struct nvkm_gsp *); -int nvkm_gsp_fwsec_sb_ctor(struct nvkm_gsp *); int nvkm_gsp_fwsec_sb(struct nvkm_gsp *); -void nvkm_gsp_fwsec_sb_dtor(struct nvkm_gsp *); +int nvkm_gsp_fwsec_sb_init(struct nvkm_gsp *gsp); struct nvkm_gsp_fwif { int version; @@ -52,6 +51,11 @@ struct nvkm_gsp_func { struct nvkm_falcon *, struct nvkm_falcon_fw *); } booter; + struct { + int (*ctor)(struct nvkm_gsp *); + void (*dtor)(struct nvkm_gsp *); + } fwsec_sb; + void (*dtor)(struct nvkm_gsp *); int (*oneinit)(struct nvkm_gsp *); int (*init)(struct nvkm_gsp *); @@ -67,6 +71,8 @@ extern const struct nvkm_falcon_func tu102_gsp_flcn; extern const struct nvkm_falcon_fw_func tu102_gsp_fwsec; int tu102_gsp_booter_ctor(struct nvkm_gsp *, const char *, const struct firmware *, struct nvkm_falcon *, struct nvkm_falcon_fw *); +int tu102_gsp_fwsec_sb_ctor(struct nvkm_gsp *); +void tu102_gsp_fwsec_sb_dtor(struct nvkm_gsp *); int tu102_gsp_oneinit(struct nvkm_gsp *); int tu102_gsp_init(struct nvkm_gsp *); int tu102_gsp_fini(struct nvkm_gsp *, bool suspend); @@ -91,5 +97,18 @@ int r535_gsp_fini(struct nvkm_gsp *, bool suspend); int nvkm_gsp_new_(const struct nvkm_gsp_fwif *, struct nvkm_device *, enum nvkm_subdev_type, int, struct nvkm_gsp **); +static inline int nvkm_gsp_fwsec_sb_ctor(struct nvkm_gsp *gsp) +{ + if (gsp->func->fwsec_sb.ctor) + return gsp->func->fwsec_sb.ctor(gsp); + return 0; +} + +static inline void nvkm_gsp_fwsec_sb_dtor(struct nvkm_gsp *gsp) +{ + if (gsp->func->fwsec_sb.dtor) + gsp->func->fwsec_sb.dtor(gsp); +} + extern const struct nvkm_gsp_func gv100_gsp; #endif diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/tu102.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/tu102.c index 81e56da0474a..04b642a1f730 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/tu102.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/tu102.c @@ -30,6 +30,18 @@ #include #include +int +tu102_gsp_fwsec_sb_ctor(struct nvkm_gsp *gsp) +{ + return nvkm_gsp_fwsec_sb_init(gsp); +} + +void +tu102_gsp_fwsec_sb_dtor(struct nvkm_gsp *gsp) +{ + nvkm_falcon_fw_dtor(&gsp->fws.falcon.sb); +} + static int tu102_gsp_booter_unload(struct nvkm_gsp *gsp, u32 mbox0, u32 mbox1) { @@ -370,6 +382,9 @@ tu102_gsp = { .booter.ctor = tu102_gsp_booter_ctor, + .fwsec_sb.ctor = tu102_gsp_fwsec_sb_ctor, + .fwsec_sb.dtor = tu102_gsp_fwsec_sb_dtor, + .dtor = r535_gsp_dtor, .oneinit = tu102_gsp_oneinit, .init = tu102_gsp_init, diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/tu116.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/tu116.c index 97eb046c25d0..58cf25842421 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/tu116.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/tu116.c @@ -30,6 +30,9 @@ tu116_gsp = { .booter.ctor = tu102_gsp_booter_ctor, + .fwsec_sb.ctor = tu102_gsp_fwsec_sb_ctor, + .fwsec_sb.dtor = tu102_gsp_fwsec_sb_dtor, + .dtor = r535_gsp_dtor, .oneinit = tu102_gsp_oneinit, .init = tu102_gsp_init, From a428e0da1248c353557970848994f35fd3f005e2 Mon Sep 17 00:00:00 2001 From: Alok Tiwari Date: Mon, 29 Dec 2025 21:21:18 -0800 Subject: [PATCH 115/283] net: marvell: prestera: fix NULL dereference on devlink_alloc() failure devlink_alloc() may return NULL on allocation failure, but prestera_devlink_alloc() unconditionally calls devlink_priv() on the returned pointer. This leads to a NULL pointer dereference if devlink allocation fails. Add a check for a NULL devlink pointer and return NULL early to avoid the crash. Fixes: 34dd1710f5a3 ("net: marvell: prestera: Add basic devlink support") Signed-off-by: Alok Tiwari Acked-by: Elad Nachman Link: https://patch.msgid.link/20251230052124.897012-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/prestera/prestera_devlink.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/marvell/prestera/prestera_devlink.c b/drivers/net/ethernet/marvell/prestera/prestera_devlink.c index 2a4c9df4eb79..e63d95c1842f 100644 --- a/drivers/net/ethernet/marvell/prestera/prestera_devlink.c +++ b/drivers/net/ethernet/marvell/prestera/prestera_devlink.c @@ -387,6 +387,8 @@ struct prestera_switch *prestera_devlink_alloc(struct prestera_device *dev) dl = devlink_alloc(&prestera_dl_ops, sizeof(struct prestera_switch), dev->dev); + if (!dl) + return NULL; return devlink_priv(dl); } From d7065436e8a04520f60c18240b775861be7999d2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Markus=20Bl=C3=B6chl?= Date: Sun, 28 Dec 2025 16:52:59 +0100 Subject: [PATCH 116/283] net: bnge: add AUXILIARY_BUS to Kconfig dependencies MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The build can currently fail with ld: drivers/net/ethernet/broadcom/bnge/bnge_auxr.o: in function `bnge_rdma_aux_device_add': bnge_auxr.c:(.text+0x366): undefined reference to `__auxiliary_device_add' ld: drivers/net/ethernet/broadcom/bnge/bnge_auxr.o: in function `bnge_rdma_aux_device_init': bnge_auxr.c:(.text+0x43c): undefined reference to `auxiliary_device_init' if BNGE is enabled but no other driver pulls in AUXILIARY_BUS. Select AUXILIARY_BUS in BNGE like in all other drivers which create an auxiliary_device. Fixes: 8ac050ec3b1c ("bng_en: Add RoCE aux device support") Signed-off-by: Markus Blöchl Reviewed-by: Vikas Gupta Link: https://patch.msgid.link/20251228-bnge_aux_bus-v1-1-82e273ebfdac@blochl.de Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/broadcom/Kconfig b/drivers/net/ethernet/broadcom/Kconfig index ca565ace6e6a..cd7dddeb91dd 100644 --- a/drivers/net/ethernet/broadcom/Kconfig +++ b/drivers/net/ethernet/broadcom/Kconfig @@ -259,6 +259,7 @@ config BNGE depends on PCI select NET_DEVLINK select PAGE_POOL + select AUXILIARY_BUS help This driver supports Broadcom ThorUltra 50/100/200/400/800 gigabit Ethernet cards. The module will be called bng_en. To compile this From 3128df6be147768fe536986fbb85db1d37806a9f Mon Sep 17 00:00:00 2001 From: Alexandre Knecht Date: Sun, 28 Dec 2025 03:00:57 +0100 Subject: [PATCH 117/283] bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress When using an 802.1ad bridge with vlan_tunnel, the C-VLAN tag is incorrectly stripped from frames during egress processing. br_handle_egress_vlan_tunnel() uses skb_vlan_pop() to remove the S-VLAN from hwaccel before VXLAN encapsulation. However, skb_vlan_pop() also moves any "next" VLAN from the payload into hwaccel: /* move next vlan tag to hw accel tag */ __skb_vlan_pop(skb, &vlan_tci); __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci); For QinQ frames where the C-VLAN sits in the payload, this moves it to hwaccel where it gets lost during VXLAN encapsulation. Fix by calling __vlan_hwaccel_clear_tag() directly, which clears only the hwaccel S-VLAN and leaves the payload untouched. This path is only taken when vlan_tunnel is enabled and tunnel_info is configured, so 802.1Q bridges are unaffected. Tested with 802.1ad bridge + VXLAN vlan_tunnel, verified C-VLAN preserved in VXLAN payload via tcpdump. Fixes: 11538d039ac6 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Signed-off-by: Alexandre Knecht Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20251228020057.2788865-1-knecht.alexandre@gmail.com Signed-off-by: Jakub Kicinski --- net/bridge/br_vlan_tunnel.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/bridge/br_vlan_tunnel.c b/net/bridge/br_vlan_tunnel.c index a966a6ec8263..257cae9f1569 100644 --- a/net/bridge/br_vlan_tunnel.c +++ b/net/bridge/br_vlan_tunnel.c @@ -189,7 +189,6 @@ int br_handle_egress_vlan_tunnel(struct sk_buff *skb, IP_TUNNEL_DECLARE_FLAGS(flags) = { }; struct metadata_dst *tunnel_dst; __be64 tunnel_id; - int err; if (!vlan) return 0; @@ -199,9 +198,13 @@ int br_handle_egress_vlan_tunnel(struct sk_buff *skb, return 0; skb_dst_drop(skb); - err = skb_vlan_pop(skb); - if (err) - return err; + /* For 802.1ad (QinQ), skb_vlan_pop() incorrectly moves the C-VLAN + * from payload to hwaccel after clearing S-VLAN. We only need to + * clear the hwaccel S-VLAN; the C-VLAN must stay in payload for + * correct VXLAN encapsulation. This is also correct for 802.1Q + * where no C-VLAN exists in payload. + */ + __vlan_hwaccel_clear_tag(skb); if (BR_INPUT_SKB_CB(skb)->backup_nhid) { __set_bit(IP_TUNNEL_KEY_BIT, flags); From 34f3ff52cb9fa7dbf04f5c734fcc4cb6ed5d1a95 Mon Sep 17 00:00:00 2001 From: Jerry Wu Date: Thu, 25 Dec 2025 20:36:17 +0000 Subject: [PATCH 118/283] net: mscc: ocelot: Fix crash when adding interface under a lag Commit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag") fixed a similar issue in the lan966x driver caused by a NULL pointer dereference. The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic and is susceptible to the same crash. This issue specifically affects the ocelot_vsc7514.c frontend, which leaves unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as it uses the DSA framework which registers all ports. Fix this by checking if the port pointer is valid before accessing it. Fixes: 528d3f190c98 ("net: mscc: ocelot: drop the use of the "lags" array") Signed-off-by: Jerry Wu Reviewed-by: Vladimir Oltean Link: https://patch.msgid.link/tencent_75EF812B305E26B0869C673DD1160866C90A@qq.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mscc/ocelot.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index 08bee56aea35..c345d9b17c89 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -2307,14 +2307,16 @@ static void ocelot_set_aggr_pgids(struct ocelot *ocelot) /* Now, set PGIDs for each active LAG */ for (lag = 0; lag < ocelot->num_phys_ports; lag++) { - struct net_device *bond = ocelot->ports[lag]->bond; + struct ocelot_port *ocelot_port = ocelot->ports[lag]; int num_active_ports = 0; + struct net_device *bond; unsigned long bond_mask; u8 aggr_idx[16]; - if (!bond || (visited & BIT(lag))) + if (!ocelot_port || !ocelot_port->bond || (visited & BIT(lag))) continue; + bond = ocelot_port->bond; bond_mask = ocelot_get_bond_mask(ocelot, bond); for_each_set_bit(port, &bond_mask, ocelot->num_phys_ports) { From 4c0856c225b39b1def6c9a6bc56faca79550da13 Mon Sep 17 00:00:00 2001 From: "yuan.gao" Date: Wed, 24 Dec 2025 14:31:45 +0800 Subject: [PATCH 119/283] inet: ping: Fix icmp out counting When the ping program uses an IPPROTO_ICMP socket to send ICMP_ECHO messages, ICMP_MIB_OUTMSGS is counted twice. ping_v4_sendmsg ping_v4_push_pending_frames ip_push_pending_frames ip_finish_skb __ip_make_skb icmp_out_count(net, icmp_type); // first count icmp_out_count(sock_net(sk), user_icmph.type); // second count However, when the ping program uses an IPPROTO_RAW socket, ICMP_MIB_OUTMSGS is counted correctly only once. Therefore, the first count should be removed. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by: yuan.gao Reviewed-by: Ido Schimmel Tested-by: Ido Schimmel Link: https://patch.msgid.link/20251224063145.3615282-1-yuan.gao@ucloud.cn Signed-off-by: Jakub Kicinski --- net/ipv4/ping.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/ipv4/ping.c b/net/ipv4/ping.c index ad56588107cc..cfbd563498e8 100644 --- a/net/ipv4/ping.c +++ b/net/ipv4/ping.c @@ -828,10 +828,8 @@ out: out_free: if (free) kfree(ipc.opt); - if (!err) { - icmp_out_count(sock_net(sk), user_icmph.type); + if (!err) return len; - } return err; do_confirm: From 62f7edd59964eb588e96fce1ad35a2327ea54424 Mon Sep 17 00:00:00 2001 From: Stefano Radaelli Date: Tue, 23 Dec 2025 13:09:39 +0100 Subject: [PATCH 120/283] net: phy: mxl-86110: Add power management and soft reset support Implement soft_reset, suspend, and resume callbacks using genphy_soft_reset(), genphy_suspend(), and genphy_resume() to fix PHY initialization and power management issues. The soft_reset callback is needed to properly recover the PHY after an ifconfig down/up cycle. Without it, the PHY can remain in power-down state, causing MDIO register access failures during config_init(). The soft reset ensures the PHY is operational before configuration. The suspend/resume callbacks enable proper power management during system suspend/resume cycles. Fixes: b2908a989c59 ("net: phy: add driver for MaxLinear MxL86110 PHY") Signed-off-by: Stefano Radaelli Link: https://patch.msgid.link/20251223120940.407195-1-stefano.r@variscite.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/mxl-86110.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/phy/mxl-86110.c b/drivers/net/phy/mxl-86110.c index e5d137a37a1d..42a5fe3f115f 100644 --- a/drivers/net/phy/mxl-86110.c +++ b/drivers/net/phy/mxl-86110.c @@ -938,6 +938,9 @@ static struct phy_driver mxl_phy_drvs[] = { PHY_ID_MATCH_EXACT(PHY_ID_MXL86110), .name = "MXL86110 Gigabit Ethernet", .config_init = mxl86110_config_init, + .suspend = genphy_suspend, + .resume = genphy_resume, + .soft_reset = genphy_soft_reset, .get_wol = mxl86110_get_wol, .set_wol = mxl86110_set_wol, .led_brightness_set = mxl86110_led_brightness_set, From 2a71a1a8d0ed718b1c7a9ac61f07e5755c47ae20 Mon Sep 17 00:00:00 2001 From: Weiming Shi Date: Wed, 24 Dec 2025 04:35:35 +0800 Subject: [PATCH 121/283] net: sock: fix hardened usercopy panic in sock_recv_errqueue skbuff_fclone_cache was created without defining a usercopy region, [1] unlike skbuff_head_cache which properly whitelists the cb[] field. [2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY is enabled and the kernel attempts to copy sk_buff.cb data to userspace via sock_recv_errqueue() -> put_cmsg(). The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone() (from skbuff_fclone_cache) [1] 2. The skb is cloned via skb_clone() using the pre-allocated fclone [3] 3. The cloned skb is queued to sk_error_queue for timestamp reporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE) 5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb [4] 6. __check_heap_object() fails because skbuff_fclone_cache has no usercopy whitelist [5] When cloned skbs allocated from skbuff_fclone_cache are used in the socket error queue, accessing the sock_exterr_skb structure in skb->cb via put_cmsg() triggers a usercopy hardening violation: [ 5.379589] usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_fclone_cache' (offset 296, size 16)! [ 5.382796] kernel BUG at mm/usercopy.c:102! [ 5.383923] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 5.384903] CPU: 1 UID: 0 PID: 138 Comm: poc_put_cmsg Not tainted 6.12.57 #7 [ 5.384903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 5.384903] RIP: 0010:usercopy_abort+0x6c/0x80 [ 5.384903] Code: 1a 86 51 48 c7 c2 40 15 1a 86 41 52 48 c7 c7 c0 15 1a 86 48 0f 45 d6 48 c7 c6 80 15 1a 86 48 89 c1 49 0f 45 f3 e8 84 27 88 ff <0f> 0b 490 [ 5.384903] RSP: 0018:ffffc900006f77a8 EFLAGS: 00010246 [ 5.384903] RAX: 000000000000006f RBX: ffff88800f0ad2a8 RCX: 1ffffffff0f72e74 [ 5.384903] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff87b973a0 [ 5.384903] RBP: 0000000000000010 R08: 0000000000000000 R09: fffffbfff0f72e74 [ 5.384903] R10: 0000000000000003 R11: 79706f6372657375 R12: 0000000000000001 [ 5.384903] R13: ffff88800f0ad2b8 R14: ffffea00003c2b40 R15: ffffea00003c2b00 [ 5.384903] FS: 0000000011bc4380(0000) GS:ffff8880bf100000(0000) knlGS:0000000000000000 [ 5.384903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.384903] CR2: 000056aa3b8e5fe4 CR3: 000000000ea26004 CR4: 0000000000770ef0 [ 5.384903] PKRU: 55555554 [ 5.384903] Call Trace: [ 5.384903] [ 5.384903] __check_heap_object+0x9a/0xd0 [ 5.384903] __check_object_size+0x46c/0x690 [ 5.384903] put_cmsg+0x129/0x5e0 [ 5.384903] sock_recv_errqueue+0x22f/0x380 [ 5.384903] tls_sw_recvmsg+0x7ed/0x1960 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? schedule+0x6d/0x270 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? mutex_unlock+0x81/0xd0 [ 5.384903] ? __pfx_mutex_unlock+0x10/0x10 [ 5.384903] ? __pfx_tls_sw_recvmsg+0x10/0x10 [ 5.384903] ? _raw_spin_lock_irqsave+0x8f/0xf0 [ 5.384903] ? _raw_read_unlock_irqrestore+0x20/0x40 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 The crash offset 296 corresponds to skb2->cb within skbuff_fclones: - sizeof(struct sk_buff) = 232 - offsetof(struct sk_buff, cb) = 40 - offset of skb2.cb in fclones = 232 + 40 = 272 - crash offset 296 = 272 + 24 (inside sock_exterr_skb.ee) This patch uses a local stack variable as a bounce buffer to avoid the hardened usercopy check failure. [1] https://elixir.bootlin.com/linux/v6.12.62/source/net/ipv4/tcp.c#L885 [2] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5104 [3] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5566 [4] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5491 [5] https://elixir.bootlin.com/linux/v6.12.62/source/mm/slub.c#L5719 Fixes: 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20251223203534.1392218-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski --- net/core/sock.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index 45c98bf524b2..a1c8b47b0d56 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -3896,7 +3896,7 @@ void sock_enable_timestamp(struct sock *sk, enum sock_flags flag) int sock_recv_errqueue(struct sock *sk, struct msghdr *msg, int len, int level, int type) { - struct sock_exterr_skb *serr; + struct sock_extended_err ee; struct sk_buff *skb; int copied, err; @@ -3916,8 +3916,9 @@ int sock_recv_errqueue(struct sock *sk, struct msghdr *msg, int len, sock_recv_timestamp(msg, sk, skb); - serr = SKB_EXT_ERR(skb); - put_cmsg(msg, level, type, sizeof(serr->ee), &serr->ee); + /* We must use a bounce buffer for CONFIG_HARDENED_USERCOPY=y */ + ee = SKB_EXT_ERR(skb)->ee; + put_cmsg(msg, level, type, sizeof(ee), &ee); msg->msg_flags |= MSG_ERRQUEUE; err = copied; From 02d1e1a3f9239cdb3ecf2c6d365fb959d1bf39df Mon Sep 17 00:00:00 2001 From: Di Zhu Date: Wed, 24 Dec 2025 09:22:24 +0800 Subject: [PATCH 122/283] netdev: preserve NETIF_F_ALL_FOR_ALL across TSO updates Directly increment the TSO features incurs a side effect: it will also directly clear the flags in NETIF_F_ALL_FOR_ALL on the master device, which can cause issues such as the inability to enable the nocache copy feature on the bonding driver. The fix is to include NETIF_F_ALL_FOR_ALL in the update mask, thereby preventing it from being cleared. Fixes: b0ce3508b25e ("bonding: allow TSO being set on bonding master") Signed-off-by: Di Zhu Link: https://patch.msgid.link/20251224012224.56185-1-zhud@hygon.cn Signed-off-by: Jakub Kicinski --- include/linux/netdevice.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 5870a9e514a5..d99b0fbc1942 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -5323,7 +5323,8 @@ netdev_features_t netdev_increment_features(netdev_features_t all, static inline netdev_features_t netdev_add_tso_features(netdev_features_t features, netdev_features_t mask) { - return netdev_increment_features(features, NETIF_F_ALL_TSO, mask); + return netdev_increment_features(features, NETIF_F_ALL_TSO | + NETIF_F_ALL_FOR_ALL, mask); } int __netdev_update_features(struct net_device *dev); From 31057979cdadfee9f934746fd84046b43506ba61 Mon Sep 17 00:00:00 2001 From: Patrisious Haddad Date: Thu, 25 Dec 2025 15:27:13 +0200 Subject: [PATCH 123/283] net/mlx5: Lag, multipath, give priority for routes with smaller network prefix Today multipath offload is controlled by a single route and the route controlling is selected if it meets one of the following criteria: 1. No controlling route is set. 2. New route destination is the same as old one. 3. New route metric is lower than old route metric. This can cause unwanted behaviour in case a new route is added with a smaller network prefix which should get the priority. Fix this by adding a new criteria to give priority to new route with a smaller network prefix. Fixes: ad11c4f1d8fd ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by: Patrisious Haddad Signed-off-by: Mark Bloch Link: https://patch.msgid.link/20251225132717.358820-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/lag/mp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/mp.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/mp.c index aee17fcf3b36..cdc99fe5c956 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag/mp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/mp.c @@ -173,10 +173,15 @@ static void mlx5_lag_fib_route_event(struct mlx5_lag *ldev, unsigned long event, } /* Handle multipath entry with lower priority value */ - if (mp->fib.mfi && mp->fib.mfi != fi && + if (mp->fib.mfi && (mp->fib.dst != fen_info->dst || mp->fib.dst_len != fen_info->dst_len) && - fi->fib_priority >= mp->fib.priority) + mp->fib.dst_len <= fen_info->dst_len && + !(mp->fib.dst_len == fen_info->dst_len && + fi->fib_priority < mp->fib.priority)) { + mlx5_core_dbg(ldev->pf[idx].dev, + "Multipath entry with lower priority was rejected\n"); return; + } nh_dev0 = mlx5_lag_get_next_fib_dev(ldev, fi, NULL); nh_dev1 = mlx5_lag_get_next_fib_dev(ldev, fi, nh_dev0); From 6c75dc9de40ff91ec2b621b78f6cd9031762067c Mon Sep 17 00:00:00 2001 From: Alexei Lazar Date: Thu, 25 Dec 2025 15:27:14 +0200 Subject: [PATCH 124/283] net/mlx5e: Don't gate FEC histograms on ppcnt_statistical_group Currently, the ppcnt_statistical_group capability check incorrectly gates access to FEC histogram statistics. This capability applies only to statistical and physical counter groups, not for histogram data. Restrict the ppcnt_statistical_group check to the Physical_Layer_Counters and Physical_Layer_Statistical_Counters groups. Histogram statistics access remains gated by the pphcr capability. The issue is harmless as of today, as it happens that ppcnt_statistical_group is set on all existing devices that have pphcr set. Fixes: 6b81b8a0b197 ("net/mlx5e: Don't query FEC statistics when FEC is disabled") Signed-off-by: Alexei Lazar Reviewed-by: Tariq Toukan Signed-off-by: Mark Bloch Link: https://patch.msgid.link/20251225132717.358820-3-mbloch@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_stats.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c index a2802cfc9b98..a8af84fc9763 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c @@ -1608,12 +1608,13 @@ void mlx5e_stats_fec_get(struct mlx5e_priv *priv, { int mode = fec_active_mode(priv->mdev); - if (mode == MLX5E_FEC_NOFEC || - !MLX5_CAP_PCAM_FEATURE(priv->mdev, ppcnt_statistical_group)) + if (mode == MLX5E_FEC_NOFEC) return; - fec_set_corrected_bits_total(priv, fec_stats); - fec_set_block_stats(priv, mode, fec_stats); + if (MLX5_CAP_PCAM_FEATURE(priv->mdev, ppcnt_statistical_group)) { + fec_set_corrected_bits_total(priv, fec_stats); + fec_set_block_stats(priv, mode, fec_stats); + } if (MLX5_CAP_PCAM_REG(priv->mdev, pphcr)) fec_set_histograms_stats(priv, mode, hist); From 7d36a4a8bf62dc508bc6bb4b59727aec25064ca5 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Thu, 25 Dec 2025 15:27:15 +0200 Subject: [PATCH 125/283] net/mlx5e: Fix NULL pointer dereference in ioctl module EEPROM query The mlx5_query_mcia() function unconditionally dereferences the status pointer to store the MCIA register status value. However, mlx5e_get_module_id() passes NULL since it doesn't need the status value. Add a NULL check before dereferencing the status pointer to prevent a NULL pointer dereference. Fixes: 2e4c44b12f4d ("net/mlx5: Refactor EEPROM query error handling to return status separately") Signed-off-by: Gal Pressman Reviewed-by: Tariq Toukan Reviewed-by: Dragos Tatulea Signed-off-by: Mark Bloch Link: https://patch.msgid.link/20251225132717.358820-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/port.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c index 85a9e534f442..8f36454dd196 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c @@ -393,9 +393,11 @@ static int mlx5_query_mcia(struct mlx5_core_dev *dev, if (err) return err; - *status = MLX5_GET(mcia_reg, out, status); - if (*status) + if (MLX5_GET(mcia_reg, out, status)) { + if (status) + *status = MLX5_GET(mcia_reg, out, status); return -EIO; + } ptr = MLX5_ADDR_OF(mcia_reg, out, dword_0); memcpy(data, ptr, size); From 144297e2a24e3e54aee1180ec21120ea38822b97 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Thu, 25 Dec 2025 15:27:16 +0200 Subject: [PATCH 126/283] net/mlx5e: Don't print error message due to invalid module Dumping module EEPROM on newer modules is supported through the netlink interface only. Querying with old userspace ethtool (or other tools, such as 'lshw') which still uses the ioctl interface results in an error message that could flood dmesg (in addition to the expected error return value). The original message was added under the assumption that the driver should be able to handle all module types, but now that such flows are easily triggered from userspace, it doesn't serve its purpose. Change the log level of the print in mlx5_query_module_eeprom() to debug. Fixes: bb64143eee8c ("net/mlx5e: Add ethtool support for dump module EEPROM") Signed-off-by: Gal Pressman Reviewed-by: Tariq Toukan Signed-off-by: Mark Bloch Link: https://patch.msgid.link/20251225132717.358820-5-mbloch@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/port.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/port.c b/drivers/net/ethernet/mellanox/mlx5/core/port.c index 8f36454dd196..7f8bed353e67 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/port.c @@ -431,7 +431,8 @@ int mlx5_query_module_eeprom(struct mlx5_core_dev *dev, mlx5_qsfp_eeprom_params_set(&query.i2c_address, &query.page, &offset); break; default: - mlx5_core_err(dev, "Module ID not recognized: 0x%x\n", module_id); + mlx5_core_dbg(dev, "Module ID not recognized: 0x%x\n", + module_id); return -EINVAL; } From 0462a15d2d1fafd3d48cf3c7c67393e42d03908c Mon Sep 17 00:00:00 2001 From: Cosmin Ratiu Date: Thu, 25 Dec 2025 15:27:17 +0200 Subject: [PATCH 127/283] net/mlx5e: Dealloc forgotten PSP RX modify header The commit which added RX steering rules for PSP forgot to free a modify header HW object on the cleanup path, which lead to health errors when reloading the driver and uninitializing the device: mlx5_core 0000:08:00.0: poll_health:803:(pid 3021): Fatal error 3 detected Fix that by saving the modify header pointer in the PSP steering struct and deallocating it after freeing the rule which references it. Fixes: 9536fbe10c9d ("net/mlx5e: Add PSP steering in local NIC RX") Signed-off-by: Cosmin Ratiu Reviewed-by: Dragos Tatulea Reviewed-by: Tariq Toukan Signed-off-by: Mark Bloch Link: https://patch.msgid.link/20251225132717.358820-6-mbloch@nvidia.com Signed-off-by: Jakub Kicinski --- .../net/ethernet/mellanox/mlx5/core/en_accel/psp.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/psp.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/psp.c index 38e7c77cc851..9a74438ce10a 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/psp.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/psp.c @@ -44,6 +44,7 @@ struct mlx5e_accel_fs_psp_prot { struct mlx5_flow_table *ft; struct mlx5_flow_group *miss_group; struct mlx5_flow_handle *miss_rule; + struct mlx5_modify_hdr *rx_modify_hdr; struct mlx5_flow_destination default_dest; struct mlx5e_psp_rx_err rx_err; u32 refcnt; @@ -286,13 +287,19 @@ out_err: return err; } -static void accel_psp_fs_rx_fs_destroy(struct mlx5e_accel_fs_psp_prot *fs_prot) +static void accel_psp_fs_rx_fs_destroy(struct mlx5e_psp_fs *fs, + struct mlx5e_accel_fs_psp_prot *fs_prot) { if (fs_prot->def_rule) { mlx5_del_flow_rules(fs_prot->def_rule); fs_prot->def_rule = NULL; } + if (fs_prot->rx_modify_hdr) { + mlx5_modify_header_dealloc(fs->mdev, fs_prot->rx_modify_hdr); + fs_prot->rx_modify_hdr = NULL; + } + if (fs_prot->miss_rule) { mlx5_del_flow_rules(fs_prot->miss_rule); fs_prot->miss_rule = NULL; @@ -396,6 +403,7 @@ static int accel_psp_fs_rx_create_ft(struct mlx5e_psp_fs *fs, modify_hdr = NULL; goto out_err; } + fs_prot->rx_modify_hdr = modify_hdr; flow_act.action = MLX5_FLOW_CONTEXT_ACTION_FWD_DEST | MLX5_FLOW_CONTEXT_ACTION_CRYPTO_DECRYPT | @@ -416,7 +424,7 @@ static int accel_psp_fs_rx_create_ft(struct mlx5e_psp_fs *fs, goto out; out_err: - accel_psp_fs_rx_fs_destroy(fs_prot); + accel_psp_fs_rx_fs_destroy(fs, fs_prot); out: kvfree(flow_group_in); kvfree(spec); @@ -433,7 +441,7 @@ static int accel_psp_fs_rx_destroy(struct mlx5e_psp_fs *fs, enum accel_fs_psp_ty /* The netdev unreg already happened, so all offloaded rule are already removed */ fs_prot = &accel_psp->fs_prot[type]; - accel_psp_fs_rx_fs_destroy(fs_prot); + accel_psp_fs_rx_fs_destroy(fs, fs_prot); accel_psp_fs_rx_err_destroy_ft(fs, &fs_prot->rx_err); From 8da901ffe497a53fa4ecc3ceed0e6d771586f88e Mon Sep 17 00:00:00 2001 From: Frank Liang Date: Wed, 31 Dec 2025 22:58:08 +0800 Subject: [PATCH 128/283] net/ena: fix missing lock when update devlink params Fix assert lock warning while calling devl_param_driverinit_value_set() in ena. WARNING: net/devlink/core.c:261 at devl_assert_locked+0x62/0x90, CPU#0: kworker/0:0/9 CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.19.0-rc2+ #1 PREEMPT(lazy) Hardware name: Amazon EC2 m8i-flex.4xlarge/, BIOS 1.0 10/16/2017 Workqueue: events work_for_cpu_fn RIP: 0010:devl_assert_locked+0x62/0x90 Call Trace: devl_param_driverinit_value_set+0x15/0x1c0 ena_devlink_alloc+0x18c/0x220 [ena] ? __pfx_ena_devlink_alloc+0x10/0x10 [ena] ? trace_hardirqs_on+0x18/0x140 ? lockdep_hardirqs_on+0x8c/0x130 ? __raw_spin_unlock_irqrestore+0x5d/0x80 ? __raw_spin_unlock_irqrestore+0x46/0x80 ? devm_ioremap_wc+0x9a/0xd0 ena_probe+0x4d2/0x1b20 [ena] ? __lock_acquire+0x56a/0xbd0 ? __pfx_ena_probe+0x10/0x10 [ena] ? local_clock+0x15/0x30 ? __lock_release.isra.0+0x1c9/0x340 ? mark_held_locks+0x40/0x70 ? lockdep_hardirqs_on_prepare.part.0+0x92/0x170 ? trace_hardirqs_on+0x18/0x140 ? lockdep_hardirqs_on+0x8c/0x130 ? __raw_spin_unlock_irqrestore+0x5d/0x80 ? __raw_spin_unlock_irqrestore+0x46/0x80 ? __pfx_ena_probe+0x10/0x10 [ena] ...... Fixes: 816b52624cf6 ("net: ena: Control PHC enable through devlink") Signed-off-by: Frank Liang Reviewed-by: David Arinzon Reviewed-by: Jiri Pirko Link: https://patch.msgid.link/20251231145808.6103-1-xiliang@redhat.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amazon/ena/ena_devlink.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/amazon/ena/ena_devlink.c b/drivers/net/ethernet/amazon/ena/ena_devlink.c index ac81c24016dd..4772185e669d 100644 --- a/drivers/net/ethernet/amazon/ena/ena_devlink.c +++ b/drivers/net/ethernet/amazon/ena/ena_devlink.c @@ -53,10 +53,12 @@ void ena_devlink_disable_phc_param(struct devlink *devlink) { union devlink_param_value value; + devl_lock(devlink); value.vbool = false; devl_param_driverinit_value_set(devlink, DEVLINK_PARAM_GENERIC_ID_ENABLE_PHC, value); + devl_unlock(devlink); } static void ena_devlink_port_register(struct devlink *devlink) @@ -145,10 +147,12 @@ static int ena_devlink_configure_params(struct devlink *devlink) return rc; } + devl_lock(devlink); value.vbool = ena_phc_is_enabled(adapter); devl_param_driverinit_value_set(devlink, DEVLINK_PARAM_GENERIC_ID_ENABLE_PHC, value); + devl_unlock(devlink); return 0; } From 92e6e0a87f6860a4710f9494f8c704d498ae60f8 Mon Sep 17 00:00:00 2001 From: Zilin Guan Date: Tue, 30 Dec 2025 07:18:53 +0000 Subject: [PATCH 129/283] net: wwan: iosm: Fix memory leak in ipc_mux_deinit() Commit 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") allocated memory for pp_qlt in ipc_mux_init() but did not free it in ipc_mux_deinit(). This results in a memory leak when the driver is unloaded. Free the allocated memory in ipc_mux_deinit() to fix the leak. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Co-developed-by: Jianhao Xu Signed-off-by: Jianhao Xu Signed-off-by: Zilin Guan Reviewed-by: Loic Poulain Link: https://patch.msgid.link/20251230071853.1062223-1-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski --- drivers/net/wwan/iosm/iosm_ipc_mux.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wwan/iosm/iosm_ipc_mux.c b/drivers/net/wwan/iosm/iosm_ipc_mux.c index fc928b298a98..b846889fcb09 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_mux.c +++ b/drivers/net/wwan/iosm/iosm_ipc_mux.c @@ -456,6 +456,7 @@ void ipc_mux_deinit(struct iosm_mux *ipc_mux) struct sk_buff_head *free_list; union mux_msg mux_msg; struct sk_buff *skb; + int i; if (!ipc_mux->initialized) return; @@ -479,5 +480,10 @@ void ipc_mux_deinit(struct iosm_mux *ipc_mux) ipc_mux->channel->dl_pipe.is_open = false; } + if (ipc_mux->protocol != MUX_LITE) { + for (i = 0; i < IPC_MEM_MUX_IP_SESSION_ENTRIES; i++) + kfree(ipc_mux->ul_adb.pp_qlt[i]); + } + kfree(ipc_mux); } From ffeafa65b2b26df2f5b5a6118d3174f17bd12ec5 Mon Sep 17 00:00:00 2001 From: Srijit Bose Date: Wed, 31 Dec 2025 00:36:25 -0800 Subject: [PATCH 130/283] bnxt_en: Fix potential data corruption with HW GRO/LRO Fix the max number of bits passed to find_first_zero_bit() in bnxt_alloc_agg_idx(). We were incorrectly passing the number of long words. find_first_zero_bit() may fail to find a zero bit and cause a wrong ID to be used. If the wrong ID is already in use, this can cause data corruption. Sometimes an error like this can also be seen: bnxt_en 0000:83:00.0 enp131s0np0: TPA end agg_buf 2 != expected agg_bufs 1 Fix it by passing the correct number of bits MAX_TPA_P5. Use DECLARE_BITMAP() to more cleanly define the bitmap. Add a sanity check to warn if a bit cannot be found and reset the ring [MChan]. Fixes: ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.") Reviewed-by: Ray Jui Signed-off-by: Srijit Bose Signed-off-by: Michael Chan Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20251231083625.3911652-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 15 ++++++++++++--- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 4 +--- 2 files changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index d17d0ea89c36..d160e54ac121 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -1482,9 +1482,11 @@ static u16 bnxt_alloc_agg_idx(struct bnxt_rx_ring_info *rxr, u16 agg_id) struct bnxt_tpa_idx_map *map = rxr->rx_tpa_idx_map; u16 idx = agg_id & MAX_TPA_P5_MASK; - if (test_bit(idx, map->agg_idx_bmap)) - idx = find_first_zero_bit(map->agg_idx_bmap, - BNXT_AGG_IDX_BMAP_SIZE); + if (test_bit(idx, map->agg_idx_bmap)) { + idx = find_first_zero_bit(map->agg_idx_bmap, MAX_TPA_P5); + if (idx >= MAX_TPA_P5) + return INVALID_HW_RING_ID; + } __set_bit(idx, map->agg_idx_bmap); map->agg_id_tbl[agg_id] = idx; return idx; @@ -1548,6 +1550,13 @@ static void bnxt_tpa_start(struct bnxt *bp, struct bnxt_rx_ring_info *rxr, if (bp->flags & BNXT_FLAG_CHIP_P5_PLUS) { agg_id = TPA_START_AGG_ID_P5(tpa_start); agg_id = bnxt_alloc_agg_idx(rxr, agg_id); + if (unlikely(agg_id == INVALID_HW_RING_ID)) { + netdev_warn(bp->dev, "Unable to allocate agg ID for ring %d, agg 0x%x\n", + rxr->bnapi->index, + TPA_START_AGG_ID_P5(tpa_start)); + bnxt_sched_reset_rxr(bp, rxr); + return; + } } else { agg_id = TPA_START_AGG_ID(tpa_start); } diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h index f5f07a7e6b29..f88e7769a838 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h @@ -1080,11 +1080,9 @@ struct bnxt_tpa_info { struct rx_agg_cmp *agg_arr; }; -#define BNXT_AGG_IDX_BMAP_SIZE (MAX_TPA_P5 / BITS_PER_LONG) - struct bnxt_tpa_idx_map { u16 agg_id_tbl[1024]; - unsigned long agg_idx_bmap[BNXT_AGG_IDX_BMAP_SIZE]; + DECLARE_BITMAP(agg_idx_bmap, MAX_TPA_P5); }; struct bnxt_rx_ring_info { From acb4bc6e1ba34ae1a34a9334a1ce8474c909466e Mon Sep 17 00:00:00 2001 From: Kommula Shiva Shankar Date: Fri, 2 Jan 2026 15:49:00 +0530 Subject: [PATCH 131/283] virtio_net: fix device mismatch in devm_kzalloc/devm_kfree Initial rss_hdr allocation uses virtio_device->device, but virtnet_set_queues() frees using net_device->device. This device mismatch causing below devres warning [ 3788.514041] ------------[ cut here ]------------ [ 3788.514044] WARNING: drivers/base/devres.c:1095 at devm_kfree+0x84/0x98, CPU#16: vdpa/1463 [ 3788.514054] Modules linked in: octep_vdpa virtio_net virtio_vdpa [last unloaded: virtio_vdpa] [ 3788.514064] CPU: 16 UID: 0 PID: 1463 Comm: vdpa Tainted: G W 6.18.0 #10 PREEMPT [ 3788.514067] Tainted: [W]=WARN [ 3788.514069] Hardware name: Marvell CN106XX board (DT) [ 3788.514071] pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) [ 3788.514074] pc : devm_kfree+0x84/0x98 [ 3788.514076] lr : devm_kfree+0x54/0x98 [ 3788.514079] sp : ffff800084e2f220 [ 3788.514080] x29: ffff800084e2f220 x28: ffff0003b2366000 x27: 000000000000003f [ 3788.514085] x26: 000000000000003f x25: ffff000106f17c10 x24: 0000000000000080 [ 3788.514089] x23: ffff00045bb8ab08 x22: ffff00045bb8a000 x21: 0000000000000018 [ 3788.514093] x20: ffff0004355c3080 x19: ffff00045bb8aa00 x18: 0000000000080000 [ 3788.514098] x17: 0000000000000040 x16: 000000000000001f x15: 000000000007ffff [ 3788.514102] x14: 0000000000000488 x13: 0000000000000005 x12: 00000000000fffff [ 3788.514106] x11: ffffffffffffffff x10: 0000000000000005 x9 : ffff800080c8c05c [ 3788.514110] x8 : ffff800084e2eeb8 x7 : 0000000000000000 x6 : 000000000000003f [ 3788.514115] x5 : ffff8000831bafe0 x4 : ffff800080c8b010 x3 : ffff0004355c3080 [ 3788.514119] x2 : ffff0004355c3080 x1 : 0000000000000000 x0 : 0000000000000000 [ 3788.514123] Call trace: [ 3788.514125] devm_kfree+0x84/0x98 (P) [ 3788.514129] virtnet_set_queues+0x134/0x2e8 [virtio_net] [ 3788.514135] virtnet_probe+0x9c0/0xe00 [virtio_net] [ 3788.514139] virtio_dev_probe+0x1e0/0x338 [ 3788.514144] really_probe+0xc8/0x3a0 [ 3788.514149] __driver_probe_device+0x84/0x170 [ 3788.514152] driver_probe_device+0x44/0x120 [ 3788.514155] __device_attach_driver+0xc4/0x168 [ 3788.514158] bus_for_each_drv+0x8c/0xf0 [ 3788.514161] __device_attach+0xa4/0x1c0 [ 3788.514164] device_initial_probe+0x1c/0x30 [ 3788.514168] bus_probe_device+0xb4/0xc0 [ 3788.514170] device_add+0x614/0x828 [ 3788.514173] register_virtio_device+0x214/0x258 [ 3788.514175] virtio_vdpa_probe+0xa0/0x110 [virtio_vdpa] [ 3788.514179] vdpa_dev_probe+0xa8/0xd8 [ 3788.514183] really_probe+0xc8/0x3a0 [ 3788.514186] __driver_probe_device+0x84/0x170 [ 3788.514189] driver_probe_device+0x44/0x120 [ 3788.514192] __device_attach_driver+0xc4/0x168 [ 3788.514195] bus_for_each_drv+0x8c/0xf0 [ 3788.514197] __device_attach+0xa4/0x1c0 [ 3788.514200] device_initial_probe+0x1c/0x30 [ 3788.514203] bus_probe_device+0xb4/0xc0 [ 3788.514206] device_add+0x614/0x828 [ 3788.514209] _vdpa_register_device+0x58/0x88 [ 3788.514211] octep_vdpa_dev_add+0x104/0x228 [octep_vdpa] [ 3788.514215] vdpa_nl_cmd_dev_add_set_doit+0x2d0/0x3c0 [ 3788.514218] genl_family_rcv_msg_doit+0xe4/0x158 [ 3788.514222] genl_rcv_msg+0x218/0x298 [ 3788.514225] netlink_rcv_skb+0x64/0x138 [ 3788.514229] genl_rcv+0x40/0x60 [ 3788.514233] netlink_unicast+0x32c/0x3b0 [ 3788.514237] netlink_sendmsg+0x170/0x3b8 [ 3788.514241] __sys_sendto+0x12c/0x1c0 [ 3788.514246] __arm64_sys_sendto+0x30/0x48 [ 3788.514249] invoke_syscall.constprop.0+0x58/0xf8 [ 3788.514255] do_el0_svc+0x48/0xd0 [ 3788.514259] el0_svc+0x48/0x210 [ 3788.514264] el0t_64_sync_handler+0xa0/0xe8 [ 3788.514268] el0t_64_sync+0x198/0x1a0 [ 3788.514271] ---[ end trace 0000000000000000 ]--- Fix by using virtio_device->device consistently for allocation and deallocation Fixes: 4944be2f5ad8c ("virtio_net: Allocate rss_hdr with devres") Signed-off-by: Kommula Shiva Shankar Acked-by: Michael S. Tsirkin Acked-by: Jason Wang Reviewed-by: Xuan Zhuo Link: https://patch.msgid.link/20260102101900.692770-1-kshankar@marvell.com Signed-off-by: Jakub Kicinski --- drivers/net/virtio_net.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 1bb3aeca66c6..22d894101c01 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -3791,7 +3791,7 @@ static int virtnet_set_queues(struct virtnet_info *vi, u16 queue_pairs) if (vi->has_rss && !netif_is_rxfh_configured(dev)) { old_rss_hdr = vi->rss_hdr; old_rss_trailer = vi->rss_trailer; - vi->rss_hdr = devm_kzalloc(&dev->dev, virtnet_rss_hdr_size(vi), GFP_KERNEL); + vi->rss_hdr = devm_kzalloc(&vi->vdev->dev, virtnet_rss_hdr_size(vi), GFP_KERNEL); if (!vi->rss_hdr) { vi->rss_hdr = old_rss_hdr; return -ENOMEM; @@ -3802,7 +3802,7 @@ static int virtnet_set_queues(struct virtnet_info *vi, u16 queue_pairs) if (!virtnet_commit_rss_command(vi)) { /* restore ctrl_rss if commit_rss_command failed */ - devm_kfree(&dev->dev, vi->rss_hdr); + devm_kfree(&vi->vdev->dev, vi->rss_hdr); vi->rss_hdr = old_rss_hdr; vi->rss_trailer = old_rss_trailer; @@ -3810,7 +3810,7 @@ static int virtnet_set_queues(struct virtnet_info *vi, u16 queue_pairs) queue_pairs); return -EINVAL; } - devm_kfree(&dev->dev, old_rss_hdr); + devm_kfree(&vi->vdev->dev, old_rss_hdr); goto succ; } From 2ef02ac38d3c17f34a00c4b267d961a8d4b45d1a Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 2 Jan 2026 15:00:07 +0100 Subject: [PATCH 132/283] inet: frags: drop fraglist conntrack references Jakub added a warning in nf_conntrack_cleanup_net_list() to make debugging leaked skbs/conntrack references more obvious. syzbot reports this as triggering, and I can also reproduce this via ip_defrag.sh selftest: conntrack cleanup blocked for 60s WARNING: net/netfilter/nf_conntrack_core.c:2512 [..] conntrack clenups gets stuck because there are skbs with still hold nf_conn references via their frag_list. net.core.skb_defer_max=0 makes the hang disappear. Eric Dumazet points out that skb_release_head_state() doesn't follow the fraglist. ip_defrag.sh can only reproduce this problem since commit 6471658dc66c ("udp: use skb_attempt_defer_free()"), but AFAICS this problem could happen with TCP as well if pmtu discovery is off. The relevant problem path for udp is: 1. netns emits fragmented packets 2. nf_defrag_v6_hook reassembles them (in output hook) 3. reassembled skb is tracked (skb owns nf_conn reference) 4. ip6_output refragments 5. refragmented packets also own nf_conn reference (ip6_fragment calls ip6_copy_metadata()) 6. on input path, nf_defrag_v6_hook skips defragmentation: the fragments already have skb->nf_conn attached 7. skbs are reassembled via ipv6_frag_rcv() 8. skb_consume_udp -> skb_attempt_defer_free() -> skb ends up in pcpu freelist, but still has nf_conn reference. Possible solutions: 1 let defrag engine drop nf_conn entry, OR 2 export kick_defer_list_purge() and call it from the conntrack netns exit callback, OR 3 add skb_has_frag_list() check to skb_attempt_defer_free() 2 & 3 also solve ip_defrag.sh hang but share same drawback: Such reassembled skbs, queued to socket, can prevent conntrack module removal until userspace has consumed the packet. While both tcp and udp stack do call nf_reset_ct() before placing skb on socket queue, that function doesn't iterate frag_list skbs. Therefore drop nf_conn entries when they are placed in defrag queue. Keep the nf_conn entry of the first (offset 0) skb so that reassembled skb retains nf_conn entry for sake of TX path. Note that fixes tag is incorrect; it points to the commit introducing the 'ip_defrag.sh reproducible problem': no need to backport this patch to every stable kernel. Reported-by: syzbot+4393c47753b7808dac7d@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/693b0fa7.050a0220.4004e.040d.GAE@google.com/ Fixes: 6471658dc66c ("udp: use skb_attempt_defer_free()") Signed-off-by: Florian Westphal Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260102140030.32367-1-fw@strlen.de Signed-off-by: Jakub Kicinski --- net/ipv4/inet_fragment.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index 001ee5c4d962..4e6d7467ed44 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -488,6 +488,8 @@ int inet_frag_queue_insert(struct inet_frag_queue *q, struct sk_buff *skb, } FRAG_CB(skb)->ip_defrag_offset = offset; + if (offset) + nf_reset_ct(skb); return IPFRAG_OK; } From 1806d210e5a8f431ad4711766ae4a333d407d972 Mon Sep 17 00:00:00 2001 From: Justin Iurman Date: Sat, 3 Jan 2026 17:53:31 +0100 Subject: [PATCH 133/283] MAINTAINERS: Update email address for Justin Iurman Due to a change of employer, I'll be using a permanent and personal email address. Signed-off-by: Justin Iurman Link: https://patch.msgid.link/20260103165331.20120-1-justin.iurman@gmail.com Signed-off-by: Jakub Kicinski --- .mailmap | 1 + MAINTAINERS | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/.mailmap b/.mailmap index 7a6110d0e46d..7354436a19c0 100644 --- a/.mailmap +++ b/.mailmap @@ -416,6 +416,7 @@ Juha Yrjola Juha Yrjola Juha Yrjola Julien Thierry +Justin Iurman Iskren Chernev Kalle Valo Kalle Valo diff --git a/MAINTAINERS b/MAINTAINERS index 765ad2daa218..410fd1f199f2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18283,7 +18283,7 @@ X: net/wireless/ X: tools/testing/selftests/net/can/ NETWORKING [IOAM] -M: Justin Iurman +M: Justin Iurman S: Maintained F: Documentation/networking/ioam6* F: include/linux/ioam6* From ff5860f5088e9076ebcccf05a6ca709d5935cfa9 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sat, 20 Dec 2025 14:14:41 +0100 Subject: [PATCH 134/283] perf: Ensure swevent hrtimer is properly destroyed With the change to hrtimer_try_to_cancel() in perf_swevent_cancel_hrtimer() it appears possible for the hrtimer to still be active by the time the event gets freed. Make sure the event does a full hrtimer_cancel() on the free path by installing a perf_event::destroy handler. Fixes: eb3182ef0405 ("perf/core: Fix system hang caused by cpu-clock usage") Reported-by: CyberUnicorns Tested-by: CyberUnicorns Debugged-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) --- kernel/events/core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/events/core.c b/kernel/events/core.c index dad0d3d2e85f..e3d8338fd51c 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -11906,6 +11906,11 @@ static void perf_swevent_cancel_hrtimer(struct perf_event *event) } } +static void perf_swevent_destroy_hrtimer(struct perf_event *event) +{ + hrtimer_cancel(&event->hw.hrtimer); +} + static void perf_swevent_init_hrtimer(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; @@ -11914,6 +11919,7 @@ static void perf_swevent_init_hrtimer(struct perf_event *event) return; hrtimer_setup(&hwc->hrtimer, perf_swevent_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_HARD); + event->destroy = perf_swevent_destroy_hrtimer; /* * Since hrtimers have a fixed rate, we can do a static freq->period From 9efb74f84ba82a9de81fc921baf3c5e2decf8256 Mon Sep 17 00:00:00 2001 From: Brendan Jackman Date: Tue, 16 Dec 2025 10:16:36 +0000 Subject: [PATCH 135/283] x86/sev: Disable GCOV on noinstr object With Debian clang version 19.1.7 (3+build5) there are calls to kasan_check_write() from __sev_es_nmi_complete(), which violates noinstr. Fix it by disabling GCOV for the noinstr object, as has been done for previous such instrumentation issues. Note that this file already disables __SANITIZE_ADDRESS__ and __SANITIZE_THREAD__, thus calls like kasan_check_write() ought to be nops regardless of GCOV. This has been fixed in other patches. However, to avoid any other accidental instrumentation showing up, (and since, in principle GCOV is instrumentation and hence should be disabled for noinstr code anyway), disable GCOV overall as well. Signed-off-by: Brendan Jackman Signed-off-by: Borislav Petkov (AMD) Acked-by: Marco Elver Link: https://patch.msgid.link/20251216-gcov-inline-noinstr-v3-3-10244d154451@google.com --- arch/x86/coco/sev/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/coco/sev/Makefile b/arch/x86/coco/sev/Makefile index 3b8ae214a6a6..b2e9ec2f6901 100644 --- a/arch/x86/coco/sev/Makefile +++ b/arch/x86/coco/sev/Makefile @@ -8,3 +8,5 @@ UBSAN_SANITIZE_noinstr.o := n # GCC may fail to respect __no_sanitize_address or __no_kcsan when inlining KASAN_SANITIZE_noinstr.o := n KCSAN_SANITIZE_noinstr.o := n + +GCOV_PROFILE_noinstr.o := n From 818156caffbf55cb4d368f9c3cac64e458fb49c9 Mon Sep 17 00:00:00 2001 From: ziming zhang Date: Thu, 11 Dec 2025 16:52:58 +0800 Subject: [PATCH 136/283] libceph: prevent potential out-of-bounds reads in handle_auth_done() Perform an explicit bounds check on payload_len to avoid a possible out-of-bounds access in the callout. [ idryomov: changelog ] Cc: stable@vger.kernel.org Signed-off-by: ziming zhang Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- net/ceph/messenger_v2.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ceph/messenger_v2.c b/net/ceph/messenger_v2.c index 833e57849c1d..c9d50c0dcd33 100644 --- a/net/ceph/messenger_v2.c +++ b/net/ceph/messenger_v2.c @@ -2376,7 +2376,9 @@ static int process_auth_done(struct ceph_connection *con, void *p, void *end) ceph_decode_64_safe(&p, end, global_id, bad); ceph_decode_32_safe(&p, end, con->v2.con_mode, bad); + ceph_decode_32_safe(&p, end, payload_len, bad); + ceph_decode_need(&p, end, payload_len, bad); dout("%s con %p global_id %llu con_mode %d payload_len %d\n", __func__, con, global_id, con->v2.con_mode, payload_len); From e00c3f71b5cf75681dbd74ee3f982a99cb690c2b Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 15 Dec 2025 11:53:31 +0100 Subject: [PATCH 137/283] libceph: replace overzealous BUG_ON in osdmap_apply_incremental() If the osdmap is (maliciously) corrupted such that the incremental osdmap epoch is different from what is expected, there is no need to BUG. Instead, just declare the incremental osdmap to be invalid. Cc: stable@vger.kernel.org Reported-by: ziming zhang Signed-off-by: Ilya Dryomov --- net/ceph/osdmap.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ceph/osdmap.c b/net/ceph/osdmap.c index 34b3ab59602f..3377a22e3f6c 100644 --- a/net/ceph/osdmap.c +++ b/net/ceph/osdmap.c @@ -1979,11 +1979,13 @@ struct ceph_osdmap *osdmap_apply_incremental(void **p, void *end, bool msgr2, sizeof(u64) + sizeof(u32), e_inval); ceph_decode_copy(p, &fsid, sizeof(fsid)); epoch = ceph_decode_32(p); - BUG_ON(epoch != map->epoch+1); ceph_decode_copy(p, &modified, sizeof(modified)); new_pool_max = ceph_decode_64(p); new_flags = ceph_decode_32(p); + if (epoch != map->epoch + 1) + goto e_inval; + /* full map? */ ceph_decode_32_safe(p, end, len, e_inval); if (len > 0) { From bc417a4baf0badbcb30325cabdaf433d8256c0e3 Mon Sep 17 00:00:00 2001 From: Viacheslav Dubeyko Date: Tue, 16 Dec 2025 12:00:06 -0800 Subject: [PATCH 138/283] ceph: update co-maintainers list in MAINTAINERS Update the list of co-maintainers for Ceph file system following Xiubo's departure. Signed-off-by: Viacheslav Dubeyko Acked-by: Alex Markuze Acked-by: Xiubo Li Signed-off-by: Ilya Dryomov --- MAINTAINERS | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 765ad2daa218..2f6a51b8a703 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5801,7 +5801,8 @@ F: drivers/power/supply/cw2015_battery.c CEPH COMMON CODE (LIBCEPH) M: Ilya Dryomov -M: Xiubo Li +M: Alex Markuze +M: Viacheslav Dubeyko L: ceph-devel@vger.kernel.org S: Supported W: http://ceph.com/ @@ -5812,8 +5813,9 @@ F: include/linux/crush/ F: net/ceph/ CEPH DISTRIBUTED FILE SYSTEM CLIENT (CEPH) -M: Xiubo Li M: Ilya Dryomov +M: Alex Markuze +M: Viacheslav Dubeyko L: ceph-devel@vger.kernel.org S: Supported W: http://ceph.com/ From e3fe30e57649c551757a02e1cad073c47e1e075e Mon Sep 17 00:00:00 2001 From: Tuo Li Date: Sun, 21 Dec 2025 02:11:49 +0800 Subject: [PATCH 139/283] libceph: make free_choose_arg_map() resilient to partial allocation free_choose_arg_map() may dereference a NULL pointer if its caller fails after a partial allocation. For example, in decode_choose_args(), if allocation of arg_map->args fails, execution jumps to the fail label and free_choose_arg_map() is called. Since arg_map->size is updated to a non-zero value before memory allocation, free_choose_arg_map() will iterate over arg_map->args and dereference a NULL pointer. To prevent this potential NULL pointer dereference and make free_choose_arg_map() more resilient, add checks for pointers before iterating. Cc: stable@vger.kernel.org Co-authored-by: Ilya Dryomov Signed-off-by: Tuo Li Reviewed-by: Viacheslav Dubeyko Signed-off-by: Ilya Dryomov --- net/ceph/osdmap.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/net/ceph/osdmap.c b/net/ceph/osdmap.c index 3377a22e3f6c..92a44026de29 100644 --- a/net/ceph/osdmap.c +++ b/net/ceph/osdmap.c @@ -241,22 +241,26 @@ static struct crush_choose_arg_map *alloc_choose_arg_map(void) static void free_choose_arg_map(struct crush_choose_arg_map *arg_map) { - if (arg_map) { - int i, j; + int i, j; - WARN_ON(!RB_EMPTY_NODE(&arg_map->node)); + if (!arg_map) + return; + WARN_ON(!RB_EMPTY_NODE(&arg_map->node)); + + if (arg_map->args) { for (i = 0; i < arg_map->size; i++) { struct crush_choose_arg *arg = &arg_map->args[i]; - - for (j = 0; j < arg->weight_set_size; j++) - kfree(arg->weight_set[j].weights); - kfree(arg->weight_set); + if (arg->weight_set) { + for (j = 0; j < arg->weight_set_size; j++) + kfree(arg->weight_set[j].weights); + kfree(arg->weight_set); + } kfree(arg->ids); } kfree(arg_map->args); - kfree(arg_map); } + kfree(arg_map); } DEFINE_RB_FUNCS(choose_arg_map, struct crush_choose_arg_map, choose_args_index, From df27c03b9e3ef2baa9e9c9f56a771d463a84489d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 3 Nov 2025 16:19:26 -0600 Subject: [PATCH 140/283] PCI: meson: Report that link is up while in ASPM L0s and L1 states Previously meson_pcie_link_up() only returned true if the link was in the L0 state. This was incorrect because hardware autonomously manages transitions between L0, L0s, and L1 while both components on the link stay in D0. Those states should all be treated as "link is active". Returning false when the device was in L0s or L1 broke config accesses because dw_pcie_other_conf_map_bus() fails if the link is down, which caused errors like this: meson-pcie fc000000.pcie: error: wait linkup timeout pci 0000:01:00.0: BAR 0: error updating (0xfc700004 != 0xffffffff) Remove the LTSSM state check, timeout, speed check, and error message from meson_pcie_link_up(), the dw_pcie_ops.link_up() method, so it is a simple boolean check of whether the link is active. Timeouts and error messages are handled at a higher level, e.g., dw_pcie_wait_for_link(). Fixes: 9c0ef6d34fdb ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver") Reported-by: Linnaea Lavia Closes: https://lore.kernel.org/r/DM4PR05MB102707B8CDF84D776C39F22F2C7F0A@DM4PR05MB10270.namprd05.prod.outlook.com [bhelgaas: squash removal of unused WAIT_LINKUP_TIMEOUT by Martin Blumenstingl : https://patch.msgid.link/20260105125625.239497-1-martin.blumenstingl@googlemail.com] Signed-off-by: Bjorn Helgaas Tested-by: Linnaea Lavia Tested-by: Neil Armstrong # on BananaPi M2S Reviewed-by: Neil Armstrong Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251103221930.1831376-1-helgaas@kernel.org Link: https://patch.msgid.link/20260105125625.239497-1-martin.blumenstingl@googlemail.com --- drivers/pci/controller/dwc/pci-meson.c | 37 +++----------------------- 1 file changed, 3 insertions(+), 34 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c index 54b6a4196f17..0694084f612b 100644 --- a/drivers/pci/controller/dwc/pci-meson.c +++ b/drivers/pci/controller/dwc/pci-meson.c @@ -37,7 +37,6 @@ #define PCIE_CFG_STATUS17 0x44 #define PM_CURRENT_STATE(x) (((x) >> 7) & 0x1) -#define WAIT_LINKUP_TIMEOUT 4000 #define PORT_CLK_RATE 100000000UL #define MAX_PAYLOAD_SIZE 256 #define MAX_READ_REQ_SIZE 256 @@ -350,40 +349,10 @@ static struct pci_ops meson_pci_ops = { static bool meson_pcie_link_up(struct dw_pcie *pci) { struct meson_pcie *mp = to_meson_pcie(pci); - struct device *dev = pci->dev; - u32 speed_okay = 0; - u32 cnt = 0; - u32 state12, state17, smlh_up, ltssm_up, rdlh_up; + u32 state12; - do { - state12 = meson_cfg_readl(mp, PCIE_CFG_STATUS12); - state17 = meson_cfg_readl(mp, PCIE_CFG_STATUS17); - smlh_up = IS_SMLH_LINK_UP(state12); - rdlh_up = IS_RDLH_LINK_UP(state12); - ltssm_up = IS_LTSSM_UP(state12); - - if (PM_CURRENT_STATE(state17) < PCIE_GEN3) - speed_okay = 1; - - if (smlh_up) - dev_dbg(dev, "smlh_link_up is on\n"); - if (rdlh_up) - dev_dbg(dev, "rdlh_link_up is on\n"); - if (ltssm_up) - dev_dbg(dev, "ltssm_up is on\n"); - if (speed_okay) - dev_dbg(dev, "speed_okay\n"); - - if (smlh_up && rdlh_up && ltssm_up && speed_okay) - return true; - - cnt++; - - udelay(10); - } while (cnt < WAIT_LINKUP_TIMEOUT); - - dev_err(dev, "error: wait linkup timeout\n"); - return false; + state12 = meson_cfg_readl(mp, PCIE_CFG_STATUS12); + return IS_SMLH_LINK_UP(state12) && IS_RDLH_LINK_UP(state12); } static int meson_pcie_host_init(struct dw_pcie_rp *pp) From 1ca8677d9f3491e51395b0e6b9a2b7a75089dc6f Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Mon, 5 Jan 2026 11:17:05 +0100 Subject: [PATCH 141/283] ACPI: PCI: IRQ: Fix INTx GSIs signedness In ACPI Global System Interrupts (GSIs) are described using a 32-bit value. ACPI/PCI legacy interrupts (INTx) parsing code treats GSIs as 'int', which poses issues if the GSI interrupt value is a 32-bit value with the MSB set (as required in some interrupt configurations - eg ARM64 GICv5 systems) because acpi_pci_link_allocate_irq() treats a negative gsi return value as a failed GSI allocation (and acpi_irq_get_penalty() would trigger an out-of-bounds array dereference if the 'irq' param is a negative value). Fix ACPI/PCI legacy INTx parsing by converting variables representing GSIs from 'int' to 'u32' bringing the code in line with the ACPI specification and fixing the current parsing issue. Signed-off-by: Lorenzo Pieralisi Reviewed-by: Bjorn Helgaas Link: https://patch.msgid.link/20260105101705.36703-1-lpieralisi@kernel.org Signed-off-by: Rafael J. Wysocki --- drivers/acpi/pci_irq.c | 19 ++++++++++-------- drivers/acpi/pci_link.c | 39 ++++++++++++++++++++++++------------- drivers/xen/acpi.c | 13 +++++++------ include/acpi/acpi_drivers.h | 2 +- 4 files changed, 44 insertions(+), 29 deletions(-) diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index ad81aa03fe2f..c416942ff3e2 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -188,7 +188,7 @@ static int acpi_pci_irq_check_entry(acpi_handle handle, struct pci_dev *dev, * the IRQ value, which is hardwired to specific interrupt inputs on * the interrupt controller. */ - pr_debug("%04x:%02x:%02x[%c] -> %s[%d]\n", + pr_debug("%04x:%02x:%02x[%c] -> %s[%u]\n", entry->id.segment, entry->id.bus, entry->id.device, pin_name(entry->pin), prt->source, entry->index); @@ -384,7 +384,7 @@ static inline bool acpi_pci_irq_valid(struct pci_dev *dev, u8 pin) int acpi_pci_irq_enable(struct pci_dev *dev) { struct acpi_prt_entry *entry; - int gsi; + u32 gsi; u8 pin; int triggering = ACPI_LEVEL_SENSITIVE; /* @@ -422,18 +422,21 @@ int acpi_pci_irq_enable(struct pci_dev *dev) return 0; } + rc = -ENODEV; + if (entry) { if (entry->link) - gsi = acpi_pci_link_allocate_irq(entry->link, + rc = acpi_pci_link_allocate_irq(entry->link, entry->index, &triggering, &polarity, - &link); - else + &link, &gsi); + else { gsi = entry->index; - } else - gsi = -1; + rc = 0; + } + } - if (gsi < 0) { + if (rc < 0) { /* * No IRQ known to the ACPI subsystem - maybe the BIOS / * driver reported one, then use it. Exit in any case. diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index bed7dc85612e..b91b039a3d20 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -448,7 +448,7 @@ static int acpi_isa_irq_penalty[ACPI_MAX_ISA_IRQS] = { /* >IRQ15 */ }; -static int acpi_irq_pci_sharing_penalty(int irq) +static int acpi_irq_pci_sharing_penalty(u32 irq) { struct acpi_pci_link *link; int penalty = 0; @@ -474,7 +474,7 @@ static int acpi_irq_pci_sharing_penalty(int irq) return penalty; } -static int acpi_irq_get_penalty(int irq) +static int acpi_irq_get_penalty(u32 irq) { int penalty = 0; @@ -528,7 +528,7 @@ static int acpi_irq_balance = -1; /* 0: static, 1: balance */ static int acpi_pci_link_allocate(struct acpi_pci_link *link) { acpi_handle handle = link->device->handle; - int irq; + u32 irq; int i; if (link->irq.initialized) { @@ -598,44 +598,53 @@ static int acpi_pci_link_allocate(struct acpi_pci_link *link) return 0; } -/* - * acpi_pci_link_allocate_irq - * success: return IRQ >= 0 - * failure: return -1 +/** + * acpi_pci_link_allocate_irq(): Retrieve a link device GSI + * + * @handle: Handle for the link device + * @index: GSI index + * @triggering: pointer to store the GSI trigger + * @polarity: pointer to store GSI polarity + * @name: pointer to store link device name + * @gsi: pointer to store GSI number + * + * Returns: + * 0 on success with @triggering, @polarity, @name, @gsi initialized. + * -ENODEV on failure */ int acpi_pci_link_allocate_irq(acpi_handle handle, int index, int *triggering, - int *polarity, char **name) + int *polarity, char **name, u32 *gsi) { struct acpi_device *device = acpi_fetch_acpi_dev(handle); struct acpi_pci_link *link; if (!device) { acpi_handle_err(handle, "Invalid link device\n"); - return -1; + return -ENODEV; } link = acpi_driver_data(device); if (!link) { acpi_handle_err(handle, "Invalid link context\n"); - return -1; + return -ENODEV; } /* TBD: Support multiple index (IRQ) entries per Link Device */ if (index) { acpi_handle_err(handle, "Invalid index %d\n", index); - return -1; + return -ENODEV; } mutex_lock(&acpi_link_lock); if (acpi_pci_link_allocate(link)) { mutex_unlock(&acpi_link_lock); - return -1; + return -ENODEV; } if (!link->irq.active) { mutex_unlock(&acpi_link_lock); acpi_handle_err(handle, "Link active IRQ is 0!\n"); - return -1; + return -ENODEV; } link->refcnt++; mutex_unlock(&acpi_link_lock); @@ -647,7 +656,9 @@ int acpi_pci_link_allocate_irq(acpi_handle handle, int index, int *triggering, if (name) *name = acpi_device_bid(link->device); acpi_handle_debug(handle, "Link is referenced\n"); - return link->irq.active; + *gsi = link->irq.active; + + return 0; } /* diff --git a/drivers/xen/acpi.c b/drivers/xen/acpi.c index d2ee605c5ca1..eab28cfe9939 100644 --- a/drivers/xen/acpi.c +++ b/drivers/xen/acpi.c @@ -89,11 +89,11 @@ int xen_acpi_get_gsi_info(struct pci_dev *dev, int *trigger_out, int *polarity_out) { - int gsi; + u32 gsi; u8 pin; struct acpi_prt_entry *entry; int trigger = ACPI_LEVEL_SENSITIVE; - int polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ? + int ret, polarity = acpi_irq_model == ACPI_IRQ_MODEL_GIC ? ACPI_ACTIVE_HIGH : ACPI_ACTIVE_LOW; if (!dev || !gsi_out || !trigger_out || !polarity_out) @@ -105,17 +105,18 @@ int xen_acpi_get_gsi_info(struct pci_dev *dev, entry = acpi_pci_irq_lookup(dev, pin); if (entry) { + ret = 0; if (entry->link) - gsi = acpi_pci_link_allocate_irq(entry->link, + ret = acpi_pci_link_allocate_irq(entry->link, entry->index, &trigger, &polarity, - NULL); + NULL, &gsi); else gsi = entry->index; } else - gsi = -1; + ret = -ENODEV; - if (gsi < 0) + if (ret < 0) return -EINVAL; *gsi_out = gsi; diff --git a/include/acpi/acpi_drivers.h b/include/acpi/acpi_drivers.h index b14d165632e7..402b97d12138 100644 --- a/include/acpi/acpi_drivers.h +++ b/include/acpi/acpi_drivers.h @@ -51,7 +51,7 @@ int acpi_irq_penalty_init(void); int acpi_pci_link_allocate_irq(acpi_handle handle, int index, int *triggering, - int *polarity, char **name); + int *polarity, char **name, u32 *gsi); int acpi_pci_link_free_irq(acpi_handle handle); /* ACPI PCI Device Binding */ From 7966cf0ebe32c981bfa3db252cb5fc3bb1bf2e77 Mon Sep 17 00:00:00 2001 From: Malaya Kumar Rout Date: Tue, 30 Dec 2025 17:26:13 +0530 Subject: [PATCH 142/283] PM: hibernate: Fix crash when freeing invalid crypto compressor When crypto_alloc_acomp() fails, it returns an ERR_PTR value, not NULL. The cleanup code in save_compressed_image() and load_compressed_image() unconditionally calls crypto_free_acomp() without checking for ERR_PTR, which causes crypto_acomp_tfm() to dereference an invalid pointer and crash the kernel. This can be triggered when the compression algorithm is unavailable (e.g., CONFIG_CRYPTO_LZO not enabled). Fix by adding IS_ERR_OR_NULL() checks before calling crypto_free_acomp() and acomp_request_free(), similar to the existing kthread_stop() check. Fixes: b03d542c3c95 ("PM: hibernate: Use crypto_acomp interface") Signed-off-by: Malaya Kumar Rout Cc: 6.15+ # 6.15+ [ rjw: Added 2 empty code lines ] Link: https://patch.msgid.link/20251230115613.64080-1-mrout@redhat.com Signed-off-by: Rafael J. Wysocki --- kernel/power/swap.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/kernel/power/swap.c b/kernel/power/swap.c index 33a186373bef..8050e5182835 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -902,8 +902,11 @@ out_clean: for (thr = 0; thr < nr_threads; thr++) { if (data[thr].thr) kthread_stop(data[thr].thr); - acomp_request_free(data[thr].cr); - crypto_free_acomp(data[thr].cc); + if (data[thr].cr) + acomp_request_free(data[thr].cr); + + if (!IS_ERR_OR_NULL(data[thr].cc)) + crypto_free_acomp(data[thr].cc); } vfree(data); } @@ -1499,8 +1502,11 @@ out_clean: for (thr = 0; thr < nr_threads; thr++) { if (data[thr].thr) kthread_stop(data[thr].thr); - acomp_request_free(data[thr].cr); - crypto_free_acomp(data[thr].cc); + if (data[thr].cr) + acomp_request_free(data[thr].cr); + + if (!IS_ERR_OR_NULL(data[thr].cc)) + crypto_free_acomp(data[thr].cc); } vfree(data); } From e0392a10c9e80a3991855a81317da3039fcbe32c Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 5 Jan 2026 07:42:48 -0700 Subject: [PATCH 143/283] io_uring/io-wq: fix incorrect io_wq_for_each_worker() termination logic A previous commit added this helper, and had it terminate if false is returned from the handler. However, that is completely opposite, it should abort the loop if true is returned. Fix this up by having io_wq_for_each_worker() keep iterating as long as false is returned, and only abort if true is returned. Cc: stable@vger.kernel.org Fixes: 751eedc4b4b7 ("io_uring/io-wq: move worker lists to struct io_wq_acct") Reported-by: Lewis Campbell Reviewed-by: Gabriel Krisman Bertazi Signed-off-by: Jens Axboe --- io_uring/io-wq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/io_uring/io-wq.c b/io_uring/io-wq.c index cd13d8aac3d2..6c5ef629e59a 100644 --- a/io_uring/io-wq.c +++ b/io_uring/io-wq.c @@ -952,11 +952,11 @@ static bool io_wq_for_each_worker(struct io_wq *wq, void *data) { for (int i = 0; i < IO_WQ_ACCT_NR; i++) { - if (!io_acct_for_each_worker(&wq->acct[i], func, data)) - return false; + if (io_acct_for_each_worker(&wq->acct[i], func, data)) + return true; } - return true; + return false; } static bool io_wq_worker_wake(struct io_worker *worker, void *data) From e84b48d31b5008932c0a0902982809fbaa1d3b70 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 29 Dec 2025 15:14:48 +0100 Subject: [PATCH 144/283] libceph: return the handler error from mon_handle_auth_done() Currently any error from ceph_auth_handle_reply_done() is propagated via finish_auth() but isn't returned from mon_handle_auth_done(). This results in higher layers learning that (despite the monitor considering us to be successfully authenticated) something went wrong in the authentication phase and reacting accordingly, but msgr2 still trying to proceed with establishing the session in the background. In the case of secure mode this can trigger a WARN in setup_crypto() and later lead to a NULL pointer dereference inside of prepare_auth_signature(). Cc: stable@vger.kernel.org Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)") Signed-off-by: Ilya Dryomov Reviewed-by: Viacheslav Dubeyko --- net/ceph/mon_client.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ceph/mon_client.c b/net/ceph/mon_client.c index c227ececa925..fa8dd2a20f7d 100644 --- a/net/ceph/mon_client.c +++ b/net/ceph/mon_client.c @@ -1417,7 +1417,7 @@ static int mon_handle_auth_done(struct ceph_connection *con, if (!ret) finish_hunting(monc); mutex_unlock(&monc->mutex); - return 0; + return ret; } static int mon_handle_auth_bad_method(struct ceph_connection *con, From 11194b416ef95012c2cfe5f546d71af07b639e93 Mon Sep 17 00:00:00 2001 From: Sam Edwards Date: Tue, 30 Dec 2025 20:05:06 -0800 Subject: [PATCH 145/283] libceph: reset sparse-read state in osd_fault() When a fault occurs, the connection is abandoned, reestablished, and any pending operations are retried. The OSD client tracks the progress of a sparse-read reply using a separate state machine, largely independent of the messenger's state. If a connection is lost mid-payload or the sparse-read state machine returns an error, the sparse-read state is not reset. The OSD client will then interpret the beginning of a new reply as the continuation of the old one. If this makes the sparse-read machinery enter a failure state, it may never recover, producing loops like: libceph: [0] got 0 extents libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read libceph: data len 142248331 != extent len 0 libceph: osd0 (1)...:6801 socket error on read Therefore, reset the sparse-read state in osd_fault(), ensuring retries start from a clean state. Cc: stable@vger.kernel.org Fixes: f628d7999727 ("libceph: add sparse read support to OSD client") Signed-off-by: Sam Edwards Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov --- net/ceph/osd_client.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 3667319b949d..1a7be2f615dc 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -4281,6 +4281,9 @@ static void osd_fault(struct ceph_connection *con) goto out_unlock; } + osd->o_sparse_op_idx = -1; + ceph_init_sparse_read(&osd->o_sparse_read); + if (!reopen_osd(osd)) kick_osd_requests(osd); maybe_request_map(osdc); From 70740454377f1ba3ff32f5df4acd965db99d055b Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Sat, 13 Dec 2025 15:16:43 +0900 Subject: [PATCH 146/283] drm/amd/display: Apply e4479aecf658 to dml After an innocuous optimization change in clang-22, allmodconfig (which enables CONFIG_KASAN and CONFIG_WERROR) breaks with: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1724:6: error: stack frame size (3144) exceeds limit (3072) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 1724 | void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ With clang-21, this function was already pretty close to the existing limit of 3072 bytes. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1724:6: error: stack frame size (2904) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 1724 | void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ A similar situation occurred in dml2, which was resolved by commit e4479aecf658 ("drm/amd/display: Increase sanitizer frame larger than limit when compile testing with clang") by increasing the limit for clang when compile testing with certain sanitizer enabled, so that allmodconfig (an easy testing target) continues to work. Apply that same change to the dml folder to clear up the warning for allmodconfig, unbreaking the build. Closes: https://github.com/ClangBuiltLinux/linux/issues/2135 Signed-off-by: Nathan Chancellor Signed-off-by: Alex Deucher (cherry picked from commit 25314b453cf812150e9951a32007a32bba85707e) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/dml/Makefile | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/Makefile b/drivers/gpu/drm/amd/display/dc/dml/Makefile index b357683b4255..268b5fbdb48b 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/Makefile +++ b/drivers/gpu/drm/amd/display/dc/dml/Makefile @@ -30,7 +30,11 @@ dml_rcflags := $(CC_FLAGS_NO_FPU) ifneq ($(CONFIG_FRAME_WARN),0) ifeq ($(filter y,$(CONFIG_KASAN)$(CONFIG_KCSAN)),y) - frame_warn_limit := 3072 + ifeq ($(CONFIG_CC_IS_CLANG)$(CONFIG_COMPILE_TEST),yy) + frame_warn_limit := 4096 + else + frame_warn_limit := 3072 + endif else frame_warn_limit := 2048 endif From f54a91f5337cd918eb86cf600320d25b6cfd8209 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Sat, 13 Dec 2025 19:58:10 +0900 Subject: [PATCH 147/283] drm/amd/display: Reduce number of arguments of dcn30's CalculatePrefetchSchedule() After an innocuous optimization change in clang-22, dml30_ModeSupportAndSystemConfigurationFull() is over the 2048 byte stack limit for display_mode_vba_30.c. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3529:6: warning: stack frame size (2096) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Wframe-larger-than] 3529 | void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ With clang-21, this function was already close to the limit: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3529:6: warning: stack frame size (1912) exceeds limit (1586) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Wframe-larger-than] 3529 | void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ CalculatePrefetchSchedule() has a large number of parameters, which must be passed on the stack. Most of the parameters between the two callsites are the same, so they can be accessed through the existing mode_lib pointer, instead of being passed as explicit arguments. Doing this reduces the stack size of dml30_ModeSupportAndSystemConfigurationFull() from 2096 bytes to 1912 bytes with clang-22. Closes: https://github.com/ClangBuiltLinux/linux/issues/2117 Signed-off-by: Nathan Chancellor Signed-off-by: Alex Deucher (cherry picked from commit b20b3fc4210f83089f835cdb91deec4b0778761a) --- .../dc/dml/dcn30/display_mode_vba_30.c | 258 +++++------------- 1 file changed, 73 insertions(+), 185 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c index 8d24763938ea..2d19bb8de59c 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c @@ -77,32 +77,14 @@ static unsigned int dscceComputeDelay( static unsigned int dscComputeDelay( enum output_format_class pixelFormat, enum output_encoder_class Output); -// Super monster function with some 45 argument static bool CalculatePrefetchSchedule( struct display_mode_lib *mode_lib, - double PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyPixelMixedWithVMData, - double PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyVMDataOnly, + unsigned int k, Pipe *myPipe, unsigned int DSCDelay, - double DPPCLKDelaySubtotalPlusCNVCFormater, - double DPPCLKDelaySCL, - double DPPCLKDelaySCLLBOnly, - double DPPCLKDelayCNVCCursor, - double DISPCLKDelaySubtotal, unsigned int DPP_RECOUT_WIDTH, - enum output_format_class OutputFormat, - unsigned int MaxInterDCNTileRepeaters, unsigned int VStartup, unsigned int MaxVStartup, - unsigned int GPUVMPageTableLevels, - bool GPUVMEnable, - bool HostVMEnable, - unsigned int HostVMMaxNonCachedPageTableLevels, - double HostVMMinPageSize, - bool DynamicMetadataEnable, - bool DynamicMetadataVMEnabled, - int DynamicMetadataLinesBeforeActiveRequired, - unsigned int DynamicMetadataTransmittedBytes, double UrgentLatency, double UrgentExtraLatency, double TCalc, @@ -116,7 +98,6 @@ static bool CalculatePrefetchSchedule( unsigned int MaxNumSwathY, double PrefetchSourceLinesC, unsigned int SwathWidthC, - int BytePerPixelC, double VInitPreFillC, unsigned int MaxNumSwathC, long swath_width_luma_ub, @@ -124,9 +105,6 @@ static bool CalculatePrefetchSchedule( unsigned int SwathHeightY, unsigned int SwathHeightC, double TWait, - bool ProgressiveToInterlaceUnitInOPP, - double *DSTXAfterScaler, - double *DSTYAfterScaler, double *DestinationLinesForPrefetch, double *PrefetchBandwidth, double *DestinationLinesToRequestVMInVBlank, @@ -135,14 +113,7 @@ static bool CalculatePrefetchSchedule( double *VRatioPrefetchC, double *RequiredPrefetchPixDataBWLuma, double *RequiredPrefetchPixDataBWChroma, - bool *NotEnoughTimeForDynamicMetadata, - double *Tno_bw, - double *prefetch_vmrow_bw, - double *Tdmdl_vm, - double *Tdmdl, - unsigned int *VUpdateOffsetPix, - double *VUpdateWidthPix, - double *VReadyOffsetPix); + bool *NotEnoughTimeForDynamicMetadata); static double RoundToDFSGranularityUp(double Clock, double VCOSpeed); static double RoundToDFSGranularityDown(double Clock, double VCOSpeed); static void CalculateDCCConfiguration( @@ -810,29 +781,12 @@ static unsigned int dscComputeDelay(enum output_format_class pixelFormat, enum o static bool CalculatePrefetchSchedule( struct display_mode_lib *mode_lib, - double PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyPixelMixedWithVMData, - double PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyVMDataOnly, + unsigned int k, Pipe *myPipe, unsigned int DSCDelay, - double DPPCLKDelaySubtotalPlusCNVCFormater, - double DPPCLKDelaySCL, - double DPPCLKDelaySCLLBOnly, - double DPPCLKDelayCNVCCursor, - double DISPCLKDelaySubtotal, unsigned int DPP_RECOUT_WIDTH, - enum output_format_class OutputFormat, - unsigned int MaxInterDCNTileRepeaters, unsigned int VStartup, unsigned int MaxVStartup, - unsigned int GPUVMPageTableLevels, - bool GPUVMEnable, - bool HostVMEnable, - unsigned int HostVMMaxNonCachedPageTableLevels, - double HostVMMinPageSize, - bool DynamicMetadataEnable, - bool DynamicMetadataVMEnabled, - int DynamicMetadataLinesBeforeActiveRequired, - unsigned int DynamicMetadataTransmittedBytes, double UrgentLatency, double UrgentExtraLatency, double TCalc, @@ -846,7 +800,6 @@ static bool CalculatePrefetchSchedule( unsigned int MaxNumSwathY, double PrefetchSourceLinesC, unsigned int SwathWidthC, - int BytePerPixelC, double VInitPreFillC, unsigned int MaxNumSwathC, long swath_width_luma_ub, @@ -854,9 +807,6 @@ static bool CalculatePrefetchSchedule( unsigned int SwathHeightY, unsigned int SwathHeightC, double TWait, - bool ProgressiveToInterlaceUnitInOPP, - double *DSTXAfterScaler, - double *DSTYAfterScaler, double *DestinationLinesForPrefetch, double *PrefetchBandwidth, double *DestinationLinesToRequestVMInVBlank, @@ -865,15 +815,10 @@ static bool CalculatePrefetchSchedule( double *VRatioPrefetchC, double *RequiredPrefetchPixDataBWLuma, double *RequiredPrefetchPixDataBWChroma, - bool *NotEnoughTimeForDynamicMetadata, - double *Tno_bw, - double *prefetch_vmrow_bw, - double *Tdmdl_vm, - double *Tdmdl, - unsigned int *VUpdateOffsetPix, - double *VUpdateWidthPix, - double *VReadyOffsetPix) + bool *NotEnoughTimeForDynamicMetadata) { + struct vba_vars_st *v = &mode_lib->vba; + double DPPCLKDelaySubtotalPlusCNVCFormater = v->DPPCLKDelaySubtotal + v->DPPCLKDelayCNVCFormater; bool MyError = false; unsigned int DPPCycles = 0, DISPCLKCycles = 0; double DSTTotalPixelsAfterScaler = 0; @@ -905,26 +850,26 @@ static bool CalculatePrefetchSchedule( double Tdmec = 0; double Tdmsks = 0; - if (GPUVMEnable == true && HostVMEnable == true) { - HostVMInefficiencyFactor = PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyPixelMixedWithVMData / PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyVMDataOnly; - HostVMDynamicLevelsTrips = HostVMMaxNonCachedPageTableLevels; + if (v->GPUVMEnable == true && v->HostVMEnable == true) { + HostVMInefficiencyFactor = v->PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyPixelMixedWithVMData / v->PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyVMDataOnly; + HostVMDynamicLevelsTrips = v->HostVMMaxNonCachedPageTableLevels; } else { HostVMInefficiencyFactor = 1; HostVMDynamicLevelsTrips = 0; } CalculateDynamicMetadataParameters( - MaxInterDCNTileRepeaters, + v->MaxInterDCNTileRepeaters, myPipe->DPPCLK, myPipe->DISPCLK, myPipe->DCFCLKDeepSleep, myPipe->PixelClock, myPipe->HTotal, myPipe->VBlank, - DynamicMetadataTransmittedBytes, - DynamicMetadataLinesBeforeActiveRequired, + v->DynamicMetadataTransmittedBytes[k], + v->DynamicMetadataLinesBeforeActiveRequired[k], myPipe->InterlaceEnable, - ProgressiveToInterlaceUnitInOPP, + v->ProgressiveToInterlaceUnitInOPP, &Tsetup, &Tdmbf, &Tdmec, @@ -932,16 +877,16 @@ static bool CalculatePrefetchSchedule( LineTime = myPipe->HTotal / myPipe->PixelClock; trip_to_mem = UrgentLatency; - Tvm_trips = UrgentExtraLatency + trip_to_mem * (GPUVMPageTableLevels * (HostVMDynamicLevelsTrips + 1) - 1); + Tvm_trips = UrgentExtraLatency + trip_to_mem * (v->GPUVMMaxPageTableLevels * (HostVMDynamicLevelsTrips + 1) - 1); - if (DynamicMetadataVMEnabled == true && GPUVMEnable == true) { - *Tdmdl = TWait + Tvm_trips + trip_to_mem; + if (v->DynamicMetadataVMEnabled == true && v->GPUVMEnable == true) { + v->Tdmdl[k] = TWait + Tvm_trips + trip_to_mem; } else { - *Tdmdl = TWait + UrgentExtraLatency; + v->Tdmdl[k] = TWait + UrgentExtraLatency; } - if (DynamicMetadataEnable == true) { - if (VStartup * LineTime < Tsetup + *Tdmdl + Tdmbf + Tdmec + Tdmsks) { + if (v->DynamicMetadataEnable[k] == true) { + if (VStartup * LineTime < Tsetup + v->Tdmdl[k] + Tdmbf + Tdmec + Tdmsks) { *NotEnoughTimeForDynamicMetadata = true; } else { *NotEnoughTimeForDynamicMetadata = false; @@ -949,39 +894,39 @@ static bool CalculatePrefetchSchedule( dml_print("DML: Tdmbf: %fus - time for dmd transfer from dchub to dio output buffer\n", Tdmbf); dml_print("DML: Tdmec: %fus - time dio takes to transfer dmd\n", Tdmec); dml_print("DML: Tdmsks: %fus - time before active dmd must complete transmission at dio\n", Tdmsks); - dml_print("DML: Tdmdl: %fus - time for fabric to become ready and fetch dmd \n", *Tdmdl); + dml_print("DML: Tdmdl: %fus - time for fabric to become ready and fetch dmd \n", v->Tdmdl[k]); } } else { *NotEnoughTimeForDynamicMetadata = false; } - *Tdmdl_vm = (DynamicMetadataEnable == true && DynamicMetadataVMEnabled == true && GPUVMEnable == true ? TWait + Tvm_trips : 0); + v->Tdmdl_vm[k] = (v->DynamicMetadataEnable[k] == true && v->DynamicMetadataVMEnabled == true && v->GPUVMEnable == true ? TWait + Tvm_trips : 0); if (myPipe->ScalerEnabled) - DPPCycles = DPPCLKDelaySubtotalPlusCNVCFormater + DPPCLKDelaySCL; + DPPCycles = DPPCLKDelaySubtotalPlusCNVCFormater + v->DPPCLKDelaySCL; else - DPPCycles = DPPCLKDelaySubtotalPlusCNVCFormater + DPPCLKDelaySCLLBOnly; + DPPCycles = DPPCLKDelaySubtotalPlusCNVCFormater + v->DPPCLKDelaySCLLBOnly; - DPPCycles = DPPCycles + myPipe->NumberOfCursors * DPPCLKDelayCNVCCursor; + DPPCycles = DPPCycles + myPipe->NumberOfCursors * v->DPPCLKDelayCNVCCursor; - DISPCLKCycles = DISPCLKDelaySubtotal; + DISPCLKCycles = v->DISPCLKDelaySubtotal; if (myPipe->DPPCLK == 0.0 || myPipe->DISPCLK == 0.0) return true; - *DSTXAfterScaler = DPPCycles * myPipe->PixelClock / myPipe->DPPCLK + DISPCLKCycles * myPipe->PixelClock / myPipe->DISPCLK + v->DSTXAfterScaler[k] = DPPCycles * myPipe->PixelClock / myPipe->DPPCLK + DISPCLKCycles * myPipe->PixelClock / myPipe->DISPCLK + DSCDelay; - *DSTXAfterScaler = *DSTXAfterScaler + ((myPipe->ODMCombineEnabled)?18:0) + (myPipe->DPPPerPlane - 1) * DPP_RECOUT_WIDTH; + v->DSTXAfterScaler[k] = v->DSTXAfterScaler[k] + ((myPipe->ODMCombineEnabled)?18:0) + (myPipe->DPPPerPlane - 1) * DPP_RECOUT_WIDTH; - if (OutputFormat == dm_420 || (myPipe->InterlaceEnable && ProgressiveToInterlaceUnitInOPP)) - *DSTYAfterScaler = 1; + if (v->OutputFormat[k] == dm_420 || (myPipe->InterlaceEnable && v->ProgressiveToInterlaceUnitInOPP)) + v->DSTYAfterScaler[k] = 1; else - *DSTYAfterScaler = 0; + v->DSTYAfterScaler[k] = 0; - DSTTotalPixelsAfterScaler = *DSTYAfterScaler * myPipe->HTotal + *DSTXAfterScaler; - *DSTYAfterScaler = dml_floor(DSTTotalPixelsAfterScaler / myPipe->HTotal, 1); - *DSTXAfterScaler = DSTTotalPixelsAfterScaler - ((double) (*DSTYAfterScaler * myPipe->HTotal)); + DSTTotalPixelsAfterScaler = v->DSTYAfterScaler[k] * myPipe->HTotal + v->DSTXAfterScaler[k]; + v->DSTYAfterScaler[k] = dml_floor(DSTTotalPixelsAfterScaler / myPipe->HTotal, 1); + v->DSTXAfterScaler[k] = DSTTotalPixelsAfterScaler - ((double) (v->DSTYAfterScaler[k] * myPipe->HTotal)); MyError = false; @@ -990,33 +935,33 @@ static bool CalculatePrefetchSchedule( Tvm_trips_rounded = dml_ceil(4.0 * Tvm_trips / LineTime, 1) / 4 * LineTime; Tr0_trips_rounded = dml_ceil(4.0 * Tr0_trips / LineTime, 1) / 4 * LineTime; - if (GPUVMEnable) { - if (GPUVMPageTableLevels >= 3) { - *Tno_bw = UrgentExtraLatency + trip_to_mem * ((GPUVMPageTableLevels - 2) - 1); + if (v->GPUVMEnable) { + if (v->GPUVMMaxPageTableLevels >= 3) { + v->Tno_bw[k] = UrgentExtraLatency + trip_to_mem * ((v->GPUVMMaxPageTableLevels - 2) - 1); } else - *Tno_bw = 0; + v->Tno_bw[k] = 0; } else if (!myPipe->DCCEnable) - *Tno_bw = LineTime; + v->Tno_bw[k] = LineTime; else - *Tno_bw = LineTime / 4; + v->Tno_bw[k] = LineTime / 4; - dst_y_prefetch_equ = VStartup - (Tsetup + dml_max(TWait + TCalc, *Tdmdl)) / LineTime - - (*DSTYAfterScaler + *DSTXAfterScaler / myPipe->HTotal); + dst_y_prefetch_equ = VStartup - (Tsetup + dml_max(TWait + TCalc, v->Tdmdl[k])) / LineTime + - (v->DSTYAfterScaler[k] + v->DSTXAfterScaler[k] / myPipe->HTotal); dst_y_prefetch_equ = dml_min(dst_y_prefetch_equ, 63.75); // limit to the reg limit of U6.2 for DST_Y_PREFETCH Lsw_oto = dml_max(PrefetchSourceLinesY, PrefetchSourceLinesC); Tsw_oto = Lsw_oto * LineTime; - prefetch_bw_oto = (PrefetchSourceLinesY * swath_width_luma_ub * BytePerPixelY + PrefetchSourceLinesC * swath_width_chroma_ub * BytePerPixelC) / Tsw_oto; + prefetch_bw_oto = (PrefetchSourceLinesY * swath_width_luma_ub * BytePerPixelY + PrefetchSourceLinesC * swath_width_chroma_ub * v->BytePerPixelC[k]) / Tsw_oto; - if (GPUVMEnable == true) { - Tvm_oto = dml_max3(*Tno_bw + PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor / prefetch_bw_oto, + if (v->GPUVMEnable == true) { + Tvm_oto = dml_max3(v->Tno_bw[k] + PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor / prefetch_bw_oto, Tvm_trips, LineTime / 4.0); } else Tvm_oto = LineTime / 4.0; - if ((GPUVMEnable == true || myPipe->DCCEnable == true)) { + if ((v->GPUVMEnable == true || myPipe->DCCEnable == true)) { Tr0_oto = dml_max3( (MetaRowByte + PixelPTEBytesPerRow * HostVMInefficiencyFactor) / prefetch_bw_oto, LineTime - Tvm_oto, LineTime / 4); @@ -1042,10 +987,10 @@ static bool CalculatePrefetchSchedule( dml_print("DML: Tdmbf: %fus - time for dmd transfer from dchub to dio output buffer\n", Tdmbf); dml_print("DML: Tdmec: %fus - time dio takes to transfer dmd\n", Tdmec); dml_print("DML: Tdmsks: %fus - time before active dmd must complete transmission at dio\n", Tdmsks); - dml_print("DML: Tdmdl_vm: %fus - time for vm stages of dmd \n", *Tdmdl_vm); - dml_print("DML: Tdmdl: %fus - time for fabric to become ready and fetch dmd \n", *Tdmdl); - dml_print("DML: dst_x_after_scl: %f pixels - number of pixel clocks pipeline and buffer delay after scaler \n", *DSTXAfterScaler); - dml_print("DML: dst_y_after_scl: %d lines - number of lines of pipeline and buffer delay after scaler \n", (int)*DSTYAfterScaler); + dml_print("DML: Tdmdl_vm: %fus - time for vm stages of dmd \n", v->Tdmdl_vm[k]); + dml_print("DML: Tdmdl: %fus - time for fabric to become ready and fetch dmd \n", v->Tdmdl[k]); + dml_print("DML: dst_x_after_scl: %f pixels - number of pixel clocks pipeline and buffer delay after scaler \n", v->DSTXAfterScaler[k]); + dml_print("DML: dst_y_after_scl: %d lines - number of lines of pipeline and buffer delay after scaler \n", (int)v->DSTYAfterScaler[k]); *PrefetchBandwidth = 0; *DestinationLinesToRequestVMInVBlank = 0; @@ -1059,26 +1004,26 @@ static bool CalculatePrefetchSchedule( double PrefetchBandwidth3 = 0; double PrefetchBandwidth4 = 0; - if (Tpre_rounded - *Tno_bw > 0) + if (Tpre_rounded - v->Tno_bw[k] > 0) PrefetchBandwidth1 = (PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor + 2 * MetaRowByte + 2 * PixelPTEBytesPerRow * HostVMInefficiencyFactor + PrefetchSourceLinesY * swath_width_luma_ub * BytePerPixelY - + PrefetchSourceLinesC * swath_width_chroma_ub * BytePerPixelC) - / (Tpre_rounded - *Tno_bw); + + PrefetchSourceLinesC * swath_width_chroma_ub * v->BytePerPixelC[k]) + / (Tpre_rounded - v->Tno_bw[k]); else PrefetchBandwidth1 = 0; - if (VStartup == MaxVStartup && (PrefetchBandwidth1 > 4 * prefetch_bw_oto) && (Tpre_rounded - Tsw_oto / 4 - 0.75 * LineTime - *Tno_bw) > 0) { - PrefetchBandwidth1 = (PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor + 2 * MetaRowByte + 2 * PixelPTEBytesPerRow * HostVMInefficiencyFactor) / (Tpre_rounded - Tsw_oto / 4 - 0.75 * LineTime - *Tno_bw); + if (VStartup == MaxVStartup && (PrefetchBandwidth1 > 4 * prefetch_bw_oto) && (Tpre_rounded - Tsw_oto / 4 - 0.75 * LineTime - v->Tno_bw[k]) > 0) { + PrefetchBandwidth1 = (PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor + 2 * MetaRowByte + 2 * PixelPTEBytesPerRow * HostVMInefficiencyFactor) / (Tpre_rounded - Tsw_oto / 4 - 0.75 * LineTime - v->Tno_bw[k]); } - if (Tpre_rounded - *Tno_bw - 2 * Tr0_trips_rounded > 0) + if (Tpre_rounded - v->Tno_bw[k] - 2 * Tr0_trips_rounded > 0) PrefetchBandwidth2 = (PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor + PrefetchSourceLinesY * swath_width_luma_ub * BytePerPixelY + PrefetchSourceLinesC * swath_width_chroma_ub * - BytePerPixelC) / - (Tpre_rounded - *Tno_bw - 2 * Tr0_trips_rounded); + v->BytePerPixelC[k]) / + (Tpre_rounded - v->Tno_bw[k] - 2 * Tr0_trips_rounded); else PrefetchBandwidth2 = 0; @@ -1086,7 +1031,7 @@ static bool CalculatePrefetchSchedule( PrefetchBandwidth3 = (2 * MetaRowByte + 2 * PixelPTEBytesPerRow * HostVMInefficiencyFactor + PrefetchSourceLinesY * swath_width_luma_ub * BytePerPixelY + PrefetchSourceLinesC * - swath_width_chroma_ub * BytePerPixelC) / (Tpre_rounded - + swath_width_chroma_ub * v->BytePerPixelC[k]) / (Tpre_rounded - Tvm_trips_rounded); else PrefetchBandwidth3 = 0; @@ -1096,7 +1041,7 @@ static bool CalculatePrefetchSchedule( } if (Tpre_rounded - Tvm_trips_rounded - 2 * Tr0_trips_rounded > 0) - PrefetchBandwidth4 = (PrefetchSourceLinesY * swath_width_luma_ub * BytePerPixelY + PrefetchSourceLinesC * swath_width_chroma_ub * BytePerPixelC) + PrefetchBandwidth4 = (PrefetchSourceLinesY * swath_width_luma_ub * BytePerPixelY + PrefetchSourceLinesC * swath_width_chroma_ub * v->BytePerPixelC[k]) / (Tpre_rounded - Tvm_trips_rounded - 2 * Tr0_trips_rounded); else PrefetchBandwidth4 = 0; @@ -1107,7 +1052,7 @@ static bool CalculatePrefetchSchedule( bool Case3OK; if (PrefetchBandwidth1 > 0) { - if (*Tno_bw + PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor / PrefetchBandwidth1 + if (v->Tno_bw[k] + PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor / PrefetchBandwidth1 >= Tvm_trips_rounded && (MetaRowByte + PixelPTEBytesPerRow * HostVMInefficiencyFactor) / PrefetchBandwidth1 >= Tr0_trips_rounded) { Case1OK = true; } else { @@ -1118,7 +1063,7 @@ static bool CalculatePrefetchSchedule( } if (PrefetchBandwidth2 > 0) { - if (*Tno_bw + PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor / PrefetchBandwidth2 + if (v->Tno_bw[k] + PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor / PrefetchBandwidth2 >= Tvm_trips_rounded && (MetaRowByte + PixelPTEBytesPerRow * HostVMInefficiencyFactor) / PrefetchBandwidth2 < Tr0_trips_rounded) { Case2OK = true; } else { @@ -1129,7 +1074,7 @@ static bool CalculatePrefetchSchedule( } if (PrefetchBandwidth3 > 0) { - if (*Tno_bw + PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor / PrefetchBandwidth3 + if (v->Tno_bw[k] + PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor / PrefetchBandwidth3 < Tvm_trips_rounded && (MetaRowByte + PixelPTEBytesPerRow * HostVMInefficiencyFactor) / PrefetchBandwidth3 >= Tr0_trips_rounded) { Case3OK = true; } else { @@ -1152,13 +1097,13 @@ static bool CalculatePrefetchSchedule( dml_print("DML: prefetch_bw_equ: %f\n", prefetch_bw_equ); if (prefetch_bw_equ > 0) { - if (GPUVMEnable) { - Tvm_equ = dml_max3(*Tno_bw + PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor / prefetch_bw_equ, Tvm_trips, LineTime / 4); + if (v->GPUVMEnable) { + Tvm_equ = dml_max3(v->Tno_bw[k] + PDEAndMetaPTEBytesFrame * HostVMInefficiencyFactor / prefetch_bw_equ, Tvm_trips, LineTime / 4); } else { Tvm_equ = LineTime / 4; } - if ((GPUVMEnable || myPipe->DCCEnable)) { + if ((v->GPUVMEnable || myPipe->DCCEnable)) { Tr0_equ = dml_max4( (MetaRowByte + PixelPTEBytesPerRow * HostVMInefficiencyFactor) / prefetch_bw_equ, Tr0_trips, @@ -1227,7 +1172,7 @@ static bool CalculatePrefetchSchedule( } *RequiredPrefetchPixDataBWLuma = (double) PrefetchSourceLinesY / LinesToRequestPrefetchPixelData * BytePerPixelY * swath_width_luma_ub / LineTime; - *RequiredPrefetchPixDataBWChroma = (double) PrefetchSourceLinesC / LinesToRequestPrefetchPixelData * BytePerPixelC * swath_width_chroma_ub / LineTime; + *RequiredPrefetchPixDataBWChroma = (double) PrefetchSourceLinesC / LinesToRequestPrefetchPixelData * v->BytePerPixelC[k] * swath_width_chroma_ub / LineTime; } else { MyError = true; dml_print("DML: MyErr set %s:%d\n", __FILE__, __LINE__); @@ -1243,9 +1188,9 @@ static bool CalculatePrefetchSchedule( dml_print("DML: Tr0: %fus - time to fetch first row of data pagetables and first row of meta data (done in parallel)\n", TimeForFetchingRowInVBlank); dml_print("DML: Tr1: %fus - time to fetch second row of data pagetables and second row of meta data (done in parallel)\n", TimeForFetchingRowInVBlank); dml_print("DML: Tsw: %fus = time to fetch enough pixel data and cursor data to feed the scalers init position and detile\n", (double)LinesToRequestPrefetchPixelData * LineTime); - dml_print("DML: To: %fus - time for propagation from scaler to optc\n", (*DSTYAfterScaler + ((*DSTXAfterScaler) / (double) myPipe->HTotal)) * LineTime); + dml_print("DML: To: %fus - time for propagation from scaler to optc\n", (v->DSTYAfterScaler[k] + ((v->DSTXAfterScaler[k]) / (double) myPipe->HTotal)) * LineTime); dml_print("DML: Tvstartup - Tsetup - Tcalc - Twait - Tpre - To > 0\n"); - dml_print("DML: Tslack(pre): %fus - time left over in schedule\n", VStartup * LineTime - TimeForFetchingMetaPTE - 2 * TimeForFetchingRowInVBlank - (*DSTYAfterScaler + ((*DSTXAfterScaler) / (double) myPipe->HTotal)) * LineTime - TWait - TCalc - Tsetup); + dml_print("DML: Tslack(pre): %fus - time left over in schedule\n", VStartup * LineTime - TimeForFetchingMetaPTE - 2 * TimeForFetchingRowInVBlank - (v->DSTYAfterScaler[k] + ((v->DSTXAfterScaler[k]) / (double) myPipe->HTotal)) * LineTime - TWait - TCalc - Tsetup); dml_print("DML: row_bytes = dpte_row_bytes (per_pipe) = PixelPTEBytesPerRow = : %d\n", PixelPTEBytesPerRow); } else { @@ -1276,7 +1221,7 @@ static bool CalculatePrefetchSchedule( dml_print("DML: MyErr set %s:%d\n", __FILE__, __LINE__); } - *prefetch_vmrow_bw = dml_max(prefetch_vm_bw, prefetch_row_bw); + v->prefetch_vmrow_bw[k] = dml_max(prefetch_vm_bw, prefetch_row_bw); } if (MyError) { @@ -2437,30 +2382,12 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman v->ErrorResult[k] = CalculatePrefetchSchedule( mode_lib, - v->PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyPixelMixedWithVMData, - v->PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyVMDataOnly, + k, &myPipe, v->DSCDelay[k], - v->DPPCLKDelaySubtotal - + v->DPPCLKDelayCNVCFormater, - v->DPPCLKDelaySCL, - v->DPPCLKDelaySCLLBOnly, - v->DPPCLKDelayCNVCCursor, - v->DISPCLKDelaySubtotal, (unsigned int) (v->SwathWidthY[k] / v->HRatio[k]), - v->OutputFormat[k], - v->MaxInterDCNTileRepeaters, dml_min(v->VStartupLines, v->MaxVStartupLines[k]), v->MaxVStartupLines[k], - v->GPUVMMaxPageTableLevels, - v->GPUVMEnable, - v->HostVMEnable, - v->HostVMMaxNonCachedPageTableLevels, - v->HostVMMinPageSize, - v->DynamicMetadataEnable[k], - v->DynamicMetadataVMEnabled, - v->DynamicMetadataLinesBeforeActiveRequired[k], - v->DynamicMetadataTransmittedBytes[k], v->UrgentLatency, v->UrgentExtraLatency, v->TCalc, @@ -2474,7 +2401,6 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman v->MaxNumSwathY[k], v->PrefetchSourceLinesC[k], v->SwathWidthC[k], - v->BytePerPixelC[k], v->VInitPreFillC[k], v->MaxNumSwathC[k], v->swath_width_luma_ub[k], @@ -2482,9 +2408,6 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman v->SwathHeightY[k], v->SwathHeightC[k], TWait, - v->ProgressiveToInterlaceUnitInOPP, - &v->DSTXAfterScaler[k], - &v->DSTYAfterScaler[k], &v->DestinationLinesForPrefetch[k], &v->PrefetchBandwidth[k], &v->DestinationLinesToRequestVMInVBlank[k], @@ -2493,14 +2416,7 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman &v->VRatioPrefetchC[k], &v->RequiredPrefetchPixDataBWLuma[k], &v->RequiredPrefetchPixDataBWChroma[k], - &v->NotEnoughTimeForDynamicMetadata[k], - &v->Tno_bw[k], - &v->prefetch_vmrow_bw[k], - &v->Tdmdl_vm[k], - &v->Tdmdl[k], - &v->VUpdateOffsetPix[k], - &v->VUpdateWidthPix[k], - &v->VReadyOffsetPix[k]); + &v->NotEnoughTimeForDynamicMetadata[k]); if (v->BlendingAndTiming[k] == k) { double TotalRepeaterDelayTime = v->MaxInterDCNTileRepeaters * (2 / v->DPPCLK[k] + 3 / v->DISPCLK); v->VUpdateWidthPix[k] = (14 / v->DCFCLKDeepSleep + 12 / v->DPPCLK[k] + TotalRepeaterDelayTime) * v->PixelClock[k]; @@ -4770,29 +4686,12 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l v->NoTimeForPrefetch[i][j][k] = CalculatePrefetchSchedule( mode_lib, - v->PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyPixelMixedWithVMData, - v->PercentOfIdealDRAMFabricAndSDPPortBWReceivedAfterUrgLatencyVMDataOnly, + k, &myPipe, v->DSCDelayPerState[i][k], - v->DPPCLKDelaySubtotal + v->DPPCLKDelayCNVCFormater, - v->DPPCLKDelaySCL, - v->DPPCLKDelaySCLLBOnly, - v->DPPCLKDelayCNVCCursor, - v->DISPCLKDelaySubtotal, v->SwathWidthYThisState[k] / v->HRatio[k], - v->OutputFormat[k], - v->MaxInterDCNTileRepeaters, dml_min(v->MaxVStartup, v->MaximumVStartup[i][j][k]), v->MaximumVStartup[i][j][k], - v->GPUVMMaxPageTableLevels, - v->GPUVMEnable, - v->HostVMEnable, - v->HostVMMaxNonCachedPageTableLevels, - v->HostVMMinPageSize, - v->DynamicMetadataEnable[k], - v->DynamicMetadataVMEnabled, - v->DynamicMetadataLinesBeforeActiveRequired[k], - v->DynamicMetadataTransmittedBytes[k], v->UrgLatency[i], v->ExtraLatency, v->TimeCalc, @@ -4806,7 +4705,6 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l v->MaxNumSwY[k], v->PrefetchLinesC[i][j][k], v->SwathWidthCThisState[k], - v->BytePerPixelC[k], v->PrefillC[k], v->MaxNumSwC[k], v->swath_width_luma_ub_this_state[k], @@ -4814,9 +4712,6 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l v->SwathHeightYThisState[k], v->SwathHeightCThisState[k], v->TWait, - v->ProgressiveToInterlaceUnitInOPP, - &v->DSTXAfterScaler[k], - &v->DSTYAfterScaler[k], &v->LineTimesForPrefetch[k], &v->PrefetchBW[k], &v->LinesForMetaPTE[k], @@ -4825,14 +4720,7 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l &v->VRatioPreC[i][j][k], &v->RequiredPrefetchPixelDataBWLuma[i][j][k], &v->RequiredPrefetchPixelDataBWChroma[i][j][k], - &v->NoTimeForDynamicMetadata[i][j][k], - &v->Tno_bw[k], - &v->prefetch_vmrow_bw[k], - &v->Tdmdl_vm[k], - &v->Tdmdl[k], - &v->VUpdateOffsetPix[k], - &v->VUpdateWidthPix[k], - &v->VReadyOffsetPix[k]); + &v->NoTimeForDynamicMetadata[i][j][k]); } for (k = 0; k <= v->NumberOfActivePlanes - 1; k++) { From 6ce6fbfddc5b127e4f57c3b5bfdcf40239a4fc2f Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Sat, 13 Dec 2025 19:58:11 +0900 Subject: [PATCH 148/283] drm/amd/display: Reduce number of arguments of dcn30's CalculateWatermarksAndDRAMSpeedChangeSupport() CalculateWatermarksAndDRAMSpeedChangeSupport() has a large number of parameters, which must be passed on the stack. Most of the parameters between the two callsites are the same, so they can be accessed through the existing mode_lib pointer, instead of being passed as explicit arguments. Doing this reduces the stack size of dml30_ModeSupportAndSystemConfigurationFull() from 1912 bytes to 1840 bytes building for x86_64 with clang-22, helping stay under the 2048 byte limit for display_mode_vba_30.c. Additionally, now that there is a pointer to mode_lib->vba available, use 'v' consistently throughout the entire function. Signed-off-by: Nathan Chancellor Signed-off-by: Alex Deucher (cherry picked from commit 563dfbefdf633c8d958398ddfa3955f9f40e47d9) --- .../dc/dml/dcn30/display_mode_vba_30.c | 287 ++++-------------- 1 file changed, 66 insertions(+), 221 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c index 2d19bb8de59c..1df3412be346 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn30/display_mode_vba_30.c @@ -265,62 +265,23 @@ static void CalculateDynamicMetadataParameters( static void CalculateWatermarksAndDRAMSpeedChangeSupport( struct display_mode_lib *mode_lib, unsigned int PrefetchMode, - unsigned int NumberOfActivePlanes, - unsigned int MaxLineBufferLines, - unsigned int LineBufferSize, - unsigned int DPPOutputBufferPixels, - unsigned int DETBufferSizeInKByte, - unsigned int WritebackInterfaceBufferSize, double DCFCLK, double ReturnBW, - bool GPUVMEnable, - unsigned int dpte_group_bytes[], - unsigned int MetaChunkSize, double UrgentLatency, double ExtraLatency, - double WritebackLatency, - double WritebackChunkSize, double SOCCLK, - double DRAMClockChangeLatency, - double SRExitTime, - double SREnterPlusExitTime, double DCFCLKDeepSleep, unsigned int DPPPerPlane[], - bool DCCEnable[], double DPPCLK[], unsigned int DETBufferSizeY[], unsigned int DETBufferSizeC[], unsigned int SwathHeightY[], unsigned int SwathHeightC[], - unsigned int LBBitPerPixel[], double SwathWidthY[], double SwathWidthC[], - double HRatio[], - double HRatioChroma[], - unsigned int vtaps[], - unsigned int VTAPsChroma[], - double VRatio[], - double VRatioChroma[], - unsigned int HTotal[], - double PixelClock[], - unsigned int BlendingAndTiming[], double BytePerPixelDETY[], double BytePerPixelDETC[], - double DSTXAfterScaler[], - double DSTYAfterScaler[], - bool WritebackEnable[], - enum source_format_class WritebackPixelFormat[], - double WritebackDestinationWidth[], - double WritebackDestinationHeight[], - double WritebackSourceHeight[], - enum clock_change_support *DRAMClockChangeSupport, - double *UrgentWatermark, - double *WritebackUrgentWatermark, - double *DRAMClockChangeWatermark, - double *WritebackDRAMClockChangeWatermark, - double *StutterExitWatermark, - double *StutterEnterPlusExitWatermark, - double *MinActiveDRAMClockChangeLatencySupported); + enum clock_change_support *DRAMClockChangeSupport); static void CalculateDCFCLKDeepSleep( struct display_mode_lib *mode_lib, unsigned int NumberOfActivePlanes, @@ -2646,62 +2607,23 @@ static void DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerforman CalculateWatermarksAndDRAMSpeedChangeSupport( mode_lib, PrefetchMode, - v->NumberOfActivePlanes, - v->MaxLineBufferLines, - v->LineBufferSize, - v->DPPOutputBufferPixels, - v->DETBufferSizeInKByte[0], - v->WritebackInterfaceBufferSize, v->DCFCLK, v->ReturnBW, - v->GPUVMEnable, - v->dpte_group_bytes, - v->MetaChunkSize, v->UrgentLatency, v->UrgentExtraLatency, - v->WritebackLatency, - v->WritebackChunkSize, v->SOCCLK, - v->FinalDRAMClockChangeLatency, - v->SRExitTime, - v->SREnterPlusExitTime, v->DCFCLKDeepSleep, v->DPPPerPlane, - v->DCCEnable, v->DPPCLK, v->DETBufferSizeY, v->DETBufferSizeC, v->SwathHeightY, v->SwathHeightC, - v->LBBitPerPixel, v->SwathWidthY, v->SwathWidthC, - v->HRatio, - v->HRatioChroma, - v->vtaps, - v->VTAPsChroma, - v->VRatio, - v->VRatioChroma, - v->HTotal, - v->PixelClock, - v->BlendingAndTiming, v->BytePerPixelDETY, v->BytePerPixelDETC, - v->DSTXAfterScaler, - v->DSTYAfterScaler, - v->WritebackEnable, - v->WritebackPixelFormat, - v->WritebackDestinationWidth, - v->WritebackDestinationHeight, - v->WritebackSourceHeight, - &DRAMClockChangeSupport, - &v->UrgentWatermark, - &v->WritebackUrgentWatermark, - &v->DRAMClockChangeWatermark, - &v->WritebackDRAMClockChangeWatermark, - &v->StutterExitWatermark, - &v->StutterEnterPlusExitWatermark, - &v->MinActiveDRAMClockChangeLatencySupported); + &DRAMClockChangeSupport); for (k = 0; k < v->NumberOfActivePlanes; ++k) { if (v->WritebackEnable[k] == true) { @@ -4895,62 +4817,23 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l CalculateWatermarksAndDRAMSpeedChangeSupport( mode_lib, v->PrefetchModePerState[i][j], - v->NumberOfActivePlanes, - v->MaxLineBufferLines, - v->LineBufferSize, - v->DPPOutputBufferPixels, - v->DETBufferSizeInKByte[0], - v->WritebackInterfaceBufferSize, v->DCFCLKState[i][j], v->ReturnBWPerState[i][j], - v->GPUVMEnable, - v->dpte_group_bytes, - v->MetaChunkSize, v->UrgLatency[i], v->ExtraLatency, - v->WritebackLatency, - v->WritebackChunkSize, v->SOCCLKPerState[i], - v->FinalDRAMClockChangeLatency, - v->SRExitTime, - v->SREnterPlusExitTime, v->ProjectedDCFCLKDeepSleep[i][j], v->NoOfDPPThisState, - v->DCCEnable, v->RequiredDPPCLKThisState, v->DETBufferSizeYThisState, v->DETBufferSizeCThisState, v->SwathHeightYThisState, v->SwathHeightCThisState, - v->LBBitPerPixel, v->SwathWidthYThisState, v->SwathWidthCThisState, - v->HRatio, - v->HRatioChroma, - v->vtaps, - v->VTAPsChroma, - v->VRatio, - v->VRatioChroma, - v->HTotal, - v->PixelClock, - v->BlendingAndTiming, v->BytePerPixelInDETY, v->BytePerPixelInDETC, - v->DSTXAfterScaler, - v->DSTYAfterScaler, - v->WritebackEnable, - v->WritebackPixelFormat, - v->WritebackDestinationWidth, - v->WritebackDestinationHeight, - v->WritebackSourceHeight, - &v->DRAMClockChangeSupport[i][j], - &v->UrgentWatermark, - &v->WritebackUrgentWatermark, - &v->DRAMClockChangeWatermark, - &v->WritebackDRAMClockChangeWatermark, - &v->StutterExitWatermark, - &v->StutterEnterPlusExitWatermark, - &v->MinActiveDRAMClockChangeLatencySupported); + &v->DRAMClockChangeSupport[i][j]); } } @@ -5067,63 +4950,25 @@ void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_l static void CalculateWatermarksAndDRAMSpeedChangeSupport( struct display_mode_lib *mode_lib, unsigned int PrefetchMode, - unsigned int NumberOfActivePlanes, - unsigned int MaxLineBufferLines, - unsigned int LineBufferSize, - unsigned int DPPOutputBufferPixels, - unsigned int DETBufferSizeInKByte, - unsigned int WritebackInterfaceBufferSize, double DCFCLK, double ReturnBW, - bool GPUVMEnable, - unsigned int dpte_group_bytes[], - unsigned int MetaChunkSize, double UrgentLatency, double ExtraLatency, - double WritebackLatency, - double WritebackChunkSize, double SOCCLK, - double DRAMClockChangeLatency, - double SRExitTime, - double SREnterPlusExitTime, double DCFCLKDeepSleep, unsigned int DPPPerPlane[], - bool DCCEnable[], double DPPCLK[], unsigned int DETBufferSizeY[], unsigned int DETBufferSizeC[], unsigned int SwathHeightY[], unsigned int SwathHeightC[], - unsigned int LBBitPerPixel[], double SwathWidthY[], double SwathWidthC[], - double HRatio[], - double HRatioChroma[], - unsigned int vtaps[], - unsigned int VTAPsChroma[], - double VRatio[], - double VRatioChroma[], - unsigned int HTotal[], - double PixelClock[], - unsigned int BlendingAndTiming[], double BytePerPixelDETY[], double BytePerPixelDETC[], - double DSTXAfterScaler[], - double DSTYAfterScaler[], - bool WritebackEnable[], - enum source_format_class WritebackPixelFormat[], - double WritebackDestinationWidth[], - double WritebackDestinationHeight[], - double WritebackSourceHeight[], - enum clock_change_support *DRAMClockChangeSupport, - double *UrgentWatermark, - double *WritebackUrgentWatermark, - double *DRAMClockChangeWatermark, - double *WritebackDRAMClockChangeWatermark, - double *StutterExitWatermark, - double *StutterEnterPlusExitWatermark, - double *MinActiveDRAMClockChangeLatencySupported) + enum clock_change_support *DRAMClockChangeSupport) { + struct vba_vars_st *v = &mode_lib->vba; double EffectiveLBLatencyHidingY = 0; double EffectiveLBLatencyHidingC = 0; double LinesInDETY[DC__NUM_DPP__MAX] = { 0 }; @@ -5142,101 +4987,101 @@ static void CalculateWatermarksAndDRAMSpeedChangeSupport( double WritebackDRAMClockChangeLatencyHiding = 0; unsigned int k, j; - mode_lib->vba.TotalActiveDPP = 0; - mode_lib->vba.TotalDCCActiveDPP = 0; - for (k = 0; k < NumberOfActivePlanes; ++k) { - mode_lib->vba.TotalActiveDPP = mode_lib->vba.TotalActiveDPP + DPPPerPlane[k]; - if (DCCEnable[k] == true) { - mode_lib->vba.TotalDCCActiveDPP = mode_lib->vba.TotalDCCActiveDPP + DPPPerPlane[k]; + v->TotalActiveDPP = 0; + v->TotalDCCActiveDPP = 0; + for (k = 0; k < v->NumberOfActivePlanes; ++k) { + v->TotalActiveDPP = v->TotalActiveDPP + DPPPerPlane[k]; + if (v->DCCEnable[k] == true) { + v->TotalDCCActiveDPP = v->TotalDCCActiveDPP + DPPPerPlane[k]; } } - *UrgentWatermark = UrgentLatency + ExtraLatency; + v->UrgentWatermark = UrgentLatency + ExtraLatency; - *DRAMClockChangeWatermark = DRAMClockChangeLatency + *UrgentWatermark; + v->DRAMClockChangeWatermark = v->FinalDRAMClockChangeLatency + v->UrgentWatermark; - mode_lib->vba.TotalActiveWriteback = 0; - for (k = 0; k < NumberOfActivePlanes; ++k) { - if (WritebackEnable[k] == true) { - mode_lib->vba.TotalActiveWriteback = mode_lib->vba.TotalActiveWriteback + 1; + v->TotalActiveWriteback = 0; + for (k = 0; k < v->NumberOfActivePlanes; ++k) { + if (v->WritebackEnable[k] == true) { + v->TotalActiveWriteback = v->TotalActiveWriteback + 1; } } - if (mode_lib->vba.TotalActiveWriteback <= 1) { - *WritebackUrgentWatermark = WritebackLatency; + if (v->TotalActiveWriteback <= 1) { + v->WritebackUrgentWatermark = v->WritebackLatency; } else { - *WritebackUrgentWatermark = WritebackLatency + WritebackChunkSize * 1024.0 / 32.0 / SOCCLK; + v->WritebackUrgentWatermark = v->WritebackLatency + v->WritebackChunkSize * 1024.0 / 32.0 / SOCCLK; } - if (mode_lib->vba.TotalActiveWriteback <= 1) { - *WritebackDRAMClockChangeWatermark = DRAMClockChangeLatency + WritebackLatency; + if (v->TotalActiveWriteback <= 1) { + v->WritebackDRAMClockChangeWatermark = v->FinalDRAMClockChangeLatency + v->WritebackLatency; } else { - *WritebackDRAMClockChangeWatermark = DRAMClockChangeLatency + WritebackLatency + WritebackChunkSize * 1024.0 / 32.0 / SOCCLK; + v->WritebackDRAMClockChangeWatermark = v->FinalDRAMClockChangeLatency + v->WritebackLatency + v->WritebackChunkSize * 1024.0 / 32.0 / SOCCLK; } - for (k = 0; k < NumberOfActivePlanes; ++k) { + for (k = 0; k < v->NumberOfActivePlanes; ++k) { - mode_lib->vba.LBLatencyHidingSourceLinesY = dml_min((double) MaxLineBufferLines, dml_floor(LineBufferSize / LBBitPerPixel[k] / (SwathWidthY[k] / dml_max(HRatio[k], 1.0)), 1)) - (vtaps[k] - 1); + v->LBLatencyHidingSourceLinesY = dml_min((double) v->MaxLineBufferLines, dml_floor(v->LineBufferSize / v->LBBitPerPixel[k] / (SwathWidthY[k] / dml_max(v->HRatio[k], 1.0)), 1)) - (v->vtaps[k] - 1); - mode_lib->vba.LBLatencyHidingSourceLinesC = dml_min((double) MaxLineBufferLines, dml_floor(LineBufferSize / LBBitPerPixel[k] / (SwathWidthC[k] / dml_max(HRatioChroma[k], 1.0)), 1)) - (VTAPsChroma[k] - 1); + v->LBLatencyHidingSourceLinesC = dml_min((double) v->MaxLineBufferLines, dml_floor(v->LineBufferSize / v->LBBitPerPixel[k] / (SwathWidthC[k] / dml_max(v->HRatioChroma[k], 1.0)), 1)) - (v->VTAPsChroma[k] - 1); - EffectiveLBLatencyHidingY = mode_lib->vba.LBLatencyHidingSourceLinesY / VRatio[k] * (HTotal[k] / PixelClock[k]); + EffectiveLBLatencyHidingY = v->LBLatencyHidingSourceLinesY / v->VRatio[k] * (v->HTotal[k] / v->PixelClock[k]); - EffectiveLBLatencyHidingC = mode_lib->vba.LBLatencyHidingSourceLinesC / VRatioChroma[k] * (HTotal[k] / PixelClock[k]); + EffectiveLBLatencyHidingC = v->LBLatencyHidingSourceLinesC / v->VRatioChroma[k] * (v->HTotal[k] / v->PixelClock[k]); LinesInDETY[k] = (double) DETBufferSizeY[k] / BytePerPixelDETY[k] / SwathWidthY[k]; LinesInDETYRoundedDownToSwath[k] = dml_floor(LinesInDETY[k], SwathHeightY[k]); - FullDETBufferingTimeY[k] = LinesInDETYRoundedDownToSwath[k] * (HTotal[k] / PixelClock[k]) / VRatio[k]; + FullDETBufferingTimeY[k] = LinesInDETYRoundedDownToSwath[k] * (v->HTotal[k] / v->PixelClock[k]) / v->VRatio[k]; if (BytePerPixelDETC[k] > 0) { - LinesInDETC = mode_lib->vba.DETBufferSizeC[k] / BytePerPixelDETC[k] / SwathWidthC[k]; + LinesInDETC = v->DETBufferSizeC[k] / BytePerPixelDETC[k] / SwathWidthC[k]; LinesInDETCRoundedDownToSwath = dml_floor(LinesInDETC, SwathHeightC[k]); - FullDETBufferingTimeC = LinesInDETCRoundedDownToSwath * (HTotal[k] / PixelClock[k]) / VRatioChroma[k]; + FullDETBufferingTimeC = LinesInDETCRoundedDownToSwath * (v->HTotal[k] / v->PixelClock[k]) / v->VRatioChroma[k]; } else { LinesInDETC = 0; FullDETBufferingTimeC = 999999; } - ActiveDRAMClockChangeLatencyMarginY = EffectiveLBLatencyHidingY + FullDETBufferingTimeY[k] - *UrgentWatermark - (HTotal[k] / PixelClock[k]) * (DSTXAfterScaler[k] / HTotal[k] + DSTYAfterScaler[k]) - *DRAMClockChangeWatermark; + ActiveDRAMClockChangeLatencyMarginY = EffectiveLBLatencyHidingY + FullDETBufferingTimeY[k] - v->UrgentWatermark - (v->HTotal[k] / v->PixelClock[k]) * (v->DSTXAfterScaler[k] / v->HTotal[k] + v->DSTYAfterScaler[k]) - v->DRAMClockChangeWatermark; - if (NumberOfActivePlanes > 1) { - ActiveDRAMClockChangeLatencyMarginY = ActiveDRAMClockChangeLatencyMarginY - (1 - 1.0 / NumberOfActivePlanes) * SwathHeightY[k] * HTotal[k] / PixelClock[k] / VRatio[k]; + if (v->NumberOfActivePlanes > 1) { + ActiveDRAMClockChangeLatencyMarginY = ActiveDRAMClockChangeLatencyMarginY - (1 - 1.0 / v->NumberOfActivePlanes) * SwathHeightY[k] * v->HTotal[k] / v->PixelClock[k] / v->VRatio[k]; } if (BytePerPixelDETC[k] > 0) { - ActiveDRAMClockChangeLatencyMarginC = EffectiveLBLatencyHidingC + FullDETBufferingTimeC - *UrgentWatermark - (HTotal[k] / PixelClock[k]) * (DSTXAfterScaler[k] / HTotal[k] + DSTYAfterScaler[k]) - *DRAMClockChangeWatermark; + ActiveDRAMClockChangeLatencyMarginC = EffectiveLBLatencyHidingC + FullDETBufferingTimeC - v->UrgentWatermark - (v->HTotal[k] / v->PixelClock[k]) * (v->DSTXAfterScaler[k] / v->HTotal[k] + v->DSTYAfterScaler[k]) - v->DRAMClockChangeWatermark; - if (NumberOfActivePlanes > 1) { - ActiveDRAMClockChangeLatencyMarginC = ActiveDRAMClockChangeLatencyMarginC - (1 - 1.0 / NumberOfActivePlanes) * SwathHeightC[k] * HTotal[k] / PixelClock[k] / VRatioChroma[k]; + if (v->NumberOfActivePlanes > 1) { + ActiveDRAMClockChangeLatencyMarginC = ActiveDRAMClockChangeLatencyMarginC - (1 - 1.0 / v->NumberOfActivePlanes) * SwathHeightC[k] * v->HTotal[k] / v->PixelClock[k] / v->VRatioChroma[k]; } - mode_lib->vba.ActiveDRAMClockChangeLatencyMargin[k] = dml_min(ActiveDRAMClockChangeLatencyMarginY, ActiveDRAMClockChangeLatencyMarginC); + v->ActiveDRAMClockChangeLatencyMargin[k] = dml_min(ActiveDRAMClockChangeLatencyMarginY, ActiveDRAMClockChangeLatencyMarginC); } else { - mode_lib->vba.ActiveDRAMClockChangeLatencyMargin[k] = ActiveDRAMClockChangeLatencyMarginY; + v->ActiveDRAMClockChangeLatencyMargin[k] = ActiveDRAMClockChangeLatencyMarginY; } - if (WritebackEnable[k] == true) { + if (v->WritebackEnable[k] == true) { - WritebackDRAMClockChangeLatencyHiding = WritebackInterfaceBufferSize * 1024 / (WritebackDestinationWidth[k] * WritebackDestinationHeight[k] / (WritebackSourceHeight[k] * HTotal[k] / PixelClock[k]) * 4); - if (WritebackPixelFormat[k] == dm_444_64) { + WritebackDRAMClockChangeLatencyHiding = v->WritebackInterfaceBufferSize * 1024 / (v->WritebackDestinationWidth[k] * v->WritebackDestinationHeight[k] / (v->WritebackSourceHeight[k] * v->HTotal[k] / v->PixelClock[k]) * 4); + if (v->WritebackPixelFormat[k] == dm_444_64) { WritebackDRAMClockChangeLatencyHiding = WritebackDRAMClockChangeLatencyHiding / 2; } - if (mode_lib->vba.WritebackConfiguration == dm_whole_buffer_for_single_stream_interleave) { + if (v->WritebackConfiguration == dm_whole_buffer_for_single_stream_interleave) { WritebackDRAMClockChangeLatencyHiding = WritebackDRAMClockChangeLatencyHiding * 2; } - WritebackDRAMClockChangeLatencyMargin = WritebackDRAMClockChangeLatencyHiding - mode_lib->vba.WritebackDRAMClockChangeWatermark; - mode_lib->vba.ActiveDRAMClockChangeLatencyMargin[k] = dml_min(mode_lib->vba.ActiveDRAMClockChangeLatencyMargin[k], WritebackDRAMClockChangeLatencyMargin); + WritebackDRAMClockChangeLatencyMargin = WritebackDRAMClockChangeLatencyHiding - v->WritebackDRAMClockChangeWatermark; + v->ActiveDRAMClockChangeLatencyMargin[k] = dml_min(v->ActiveDRAMClockChangeLatencyMargin[k], WritebackDRAMClockChangeLatencyMargin); } } - mode_lib->vba.MinActiveDRAMClockChangeMargin = 999999; + v->MinActiveDRAMClockChangeMargin = 999999; PlaneWithMinActiveDRAMClockChangeMargin = 0; - for (k = 0; k < NumberOfActivePlanes; ++k) { - if (mode_lib->vba.ActiveDRAMClockChangeLatencyMargin[k] < mode_lib->vba.MinActiveDRAMClockChangeMargin) { - mode_lib->vba.MinActiveDRAMClockChangeMargin = mode_lib->vba.ActiveDRAMClockChangeLatencyMargin[k]; - if (BlendingAndTiming[k] == k) { + for (k = 0; k < v->NumberOfActivePlanes; ++k) { + if (v->ActiveDRAMClockChangeLatencyMargin[k] < v->MinActiveDRAMClockChangeMargin) { + v->MinActiveDRAMClockChangeMargin = v->ActiveDRAMClockChangeLatencyMargin[k]; + if (v->BlendingAndTiming[k] == k) { PlaneWithMinActiveDRAMClockChangeMargin = k; } else { - for (j = 0; j < NumberOfActivePlanes; ++j) { - if (BlendingAndTiming[k] == j) { + for (j = 0; j < v->NumberOfActivePlanes; ++j) { + if (v->BlendingAndTiming[k] == j) { PlaneWithMinActiveDRAMClockChangeMargin = j; } } @@ -5244,40 +5089,40 @@ static void CalculateWatermarksAndDRAMSpeedChangeSupport( } } - *MinActiveDRAMClockChangeLatencySupported = mode_lib->vba.MinActiveDRAMClockChangeMargin + DRAMClockChangeLatency; + v->MinActiveDRAMClockChangeLatencySupported = v->MinActiveDRAMClockChangeMargin + v->FinalDRAMClockChangeLatency; SecondMinActiveDRAMClockChangeMarginOneDisplayInVBLank = 999999; - for (k = 0; k < NumberOfActivePlanes; ++k) { - if (!((k == PlaneWithMinActiveDRAMClockChangeMargin) && (BlendingAndTiming[k] == k)) && !(BlendingAndTiming[k] == PlaneWithMinActiveDRAMClockChangeMargin) && mode_lib->vba.ActiveDRAMClockChangeLatencyMargin[k] < SecondMinActiveDRAMClockChangeMarginOneDisplayInVBLank) { - SecondMinActiveDRAMClockChangeMarginOneDisplayInVBLank = mode_lib->vba.ActiveDRAMClockChangeLatencyMargin[k]; + for (k = 0; k < v->NumberOfActivePlanes; ++k) { + if (!((k == PlaneWithMinActiveDRAMClockChangeMargin) && (v->BlendingAndTiming[k] == k)) && !(v->BlendingAndTiming[k] == PlaneWithMinActiveDRAMClockChangeMargin) && v->ActiveDRAMClockChangeLatencyMargin[k] < SecondMinActiveDRAMClockChangeMarginOneDisplayInVBLank) { + SecondMinActiveDRAMClockChangeMarginOneDisplayInVBLank = v->ActiveDRAMClockChangeLatencyMargin[k]; } } - mode_lib->vba.TotalNumberOfActiveOTG = 0; - for (k = 0; k < NumberOfActivePlanes; ++k) { - if (BlendingAndTiming[k] == k) { - mode_lib->vba.TotalNumberOfActiveOTG = mode_lib->vba.TotalNumberOfActiveOTG + 1; + v->TotalNumberOfActiveOTG = 0; + for (k = 0; k < v->NumberOfActivePlanes; ++k) { + if (v->BlendingAndTiming[k] == k) { + v->TotalNumberOfActiveOTG = v->TotalNumberOfActiveOTG + 1; } } - if (mode_lib->vba.MinActiveDRAMClockChangeMargin > 0) { + if (v->MinActiveDRAMClockChangeMargin > 0) { *DRAMClockChangeSupport = dm_dram_clock_change_vactive; - } else if (((mode_lib->vba.SynchronizedVBlank == true || mode_lib->vba.TotalNumberOfActiveOTG == 1 || SecondMinActiveDRAMClockChangeMarginOneDisplayInVBLank > 0) && PrefetchMode == 0)) { + } else if (((v->SynchronizedVBlank == true || v->TotalNumberOfActiveOTG == 1 || SecondMinActiveDRAMClockChangeMarginOneDisplayInVBLank > 0) && PrefetchMode == 0)) { *DRAMClockChangeSupport = dm_dram_clock_change_vblank; } else { *DRAMClockChangeSupport = dm_dram_clock_change_unsupported; } FullDETBufferingTimeYStutterCriticalPlane = FullDETBufferingTimeY[0]; - for (k = 0; k < NumberOfActivePlanes; ++k) { + for (k = 0; k < v->NumberOfActivePlanes; ++k) { if (FullDETBufferingTimeY[k] <= FullDETBufferingTimeYStutterCriticalPlane) { FullDETBufferingTimeYStutterCriticalPlane = FullDETBufferingTimeY[k]; - TimeToFinishSwathTransferStutterCriticalPlane = (SwathHeightY[k] - (LinesInDETY[k] - LinesInDETYRoundedDownToSwath[k])) * (HTotal[k] / PixelClock[k]) / VRatio[k]; + TimeToFinishSwathTransferStutterCriticalPlane = (SwathHeightY[k] - (LinesInDETY[k] - LinesInDETYRoundedDownToSwath[k])) * (v->HTotal[k] / v->PixelClock[k]) / v->VRatio[k]; } } - *StutterExitWatermark = SRExitTime + ExtraLatency + 10 / DCFCLKDeepSleep; - *StutterEnterPlusExitWatermark = dml_max(SREnterPlusExitTime + ExtraLatency + 10 / DCFCLKDeepSleep, TimeToFinishSwathTransferStutterCriticalPlane); + v->StutterExitWatermark = v->SRExitTime + ExtraLatency + 10 / DCFCLKDeepSleep; + v->StutterEnterPlusExitWatermark = dml_max(v->SREnterPlusExitTime + ExtraLatency + 10 / DCFCLKDeepSleep, TimeToFinishSwathTransferStutterCriticalPlane); } From 19158c7332468bc28572bdca428e89c7954ee1b1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 30 Jun 2025 10:47:09 -0400 Subject: [PATCH 149/283] drm/radeon: Remove __counted_by from ClockInfoArray.clockInfo[] clockInfo[] is a generic uchar pointer to variable sized structures which vary from ASIC to ASIC. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4374 Reviewed-by: Lijo Lazar Signed-off-by: Alex Deucher (cherry picked from commit dc135aa73561b5acc74eadf776e48530996529a3) Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/pptable.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/pptable.h b/drivers/gpu/drm/radeon/pptable.h index 969a8fb0ee9e..f4e71046dc91 100644 --- a/drivers/gpu/drm/radeon/pptable.h +++ b/drivers/gpu/drm/radeon/pptable.h @@ -450,7 +450,7 @@ typedef struct _ClockInfoArray{ //sizeof(ATOM_PPLIB_CLOCK_INFO) UCHAR ucEntrySize; - UCHAR clockInfo[] __counted_by(ucNumEntries); + UCHAR clockInfo[] /*__counted_by(ucNumEntries)*/; }ClockInfoArray; typedef struct _NonClockInfoArray{ From 4f74c2dd970611d3ec3bb0d58215e73af5cd7214 Mon Sep 17 00:00:00 2001 From: Yang Wang Date: Thu, 11 Dec 2025 10:47:18 +0800 Subject: [PATCH 150/283] drm/amd/pm: fix wrong pcie parameter on navi1x fix wrong pcie dpm parameter on navi1x Fixes: 1a18607c07bb ("drm/amd/pm: override pcie dpm parameters only if it is necessary") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4671 Signed-off-by: Yang Wang Co-developed-by: Kenneth Feng Signed-off-by: Kenneth Feng Acked-by: Alex Deucher Reviewed-by: Lijo Lazar Signed-off-by: Alex Deucher (cherry picked from commit 5c5189cf4b0cc0a22bac74a40743ee711cff07f8) --- drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c index 7c9f77124ab2..16e3cc10891d 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c @@ -2464,8 +2464,8 @@ static int navi10_update_pcie_parameters(struct smu_context *smu, pptable->PcieLaneCount[i] > pcie_width_cap ? pcie_width_cap : pptable->PcieLaneCount[i]; smu_pcie_arg = i << 16; - smu_pcie_arg |= pcie_gen_cap << 8; - smu_pcie_arg |= pcie_width_cap; + smu_pcie_arg |= dpm_context->dpm_tables.pcie_table.pcie_gen[i] << 8; + smu_pcie_arg |= dpm_context->dpm_tables.pcie_table.pcie_lane[i]; ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_OverridePcieParameters, smu_pcie_arg, From dc8a887de1a7d397ab4131f45676e89565417aa8 Mon Sep 17 00:00:00 2001 From: Yang Wang Date: Mon, 15 Dec 2025 17:51:11 +0800 Subject: [PATCH 151/283] drm/amd/pm: force send pcie parmater on navi1x v1: the PMFW didn't initialize the PCIe DPM parameters and requires the KMD to actively provide these parameters. v2: clean & remove unused code logic (lijo) Fixes: 1a18607c07bb ("drm/amd/pm: override pcie dpm parameters only if it is necessary") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4671 Signed-off-by: Yang Wang Reviewed-by: Lijo Lazar Signed-off-by: Alex Deucher (cherry picked from commit b0dbd5db7cf1f81e4aaedd25cb5e72ce369387b2) --- .../gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c | 33 +++++++++---------- 1 file changed, 15 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c index 16e3cc10891d..c4966dcc6875 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c @@ -2455,24 +2455,21 @@ static int navi10_update_pcie_parameters(struct smu_context *smu, } for (i = 0; i < NUM_LINK_LEVELS; i++) { - if (pptable->PcieGenSpeed[i] > pcie_gen_cap || - pptable->PcieLaneCount[i] > pcie_width_cap) { - dpm_context->dpm_tables.pcie_table.pcie_gen[i] = - pptable->PcieGenSpeed[i] > pcie_gen_cap ? - pcie_gen_cap : pptable->PcieGenSpeed[i]; - dpm_context->dpm_tables.pcie_table.pcie_lane[i] = - pptable->PcieLaneCount[i] > pcie_width_cap ? - pcie_width_cap : pptable->PcieLaneCount[i]; - smu_pcie_arg = i << 16; - smu_pcie_arg |= dpm_context->dpm_tables.pcie_table.pcie_gen[i] << 8; - smu_pcie_arg |= dpm_context->dpm_tables.pcie_table.pcie_lane[i]; - ret = smu_cmn_send_smc_msg_with_param(smu, - SMU_MSG_OverridePcieParameters, - smu_pcie_arg, - NULL); - if (ret) - break; - } + dpm_context->dpm_tables.pcie_table.pcie_gen[i] = + pptable->PcieGenSpeed[i] > pcie_gen_cap ? + pcie_gen_cap : pptable->PcieGenSpeed[i]; + dpm_context->dpm_tables.pcie_table.pcie_lane[i] = + pptable->PcieLaneCount[i] > pcie_width_cap ? + pcie_width_cap : pptable->PcieLaneCount[i]; + smu_pcie_arg = i << 16; + smu_pcie_arg |= dpm_context->dpm_tables.pcie_table.pcie_gen[i] << 8; + smu_pcie_arg |= dpm_context->dpm_tables.pcie_table.pcie_lane[i]; + ret = smu_cmn_send_smc_msg_with_param(smu, + SMU_MSG_OverridePcieParameters, + smu_pcie_arg, + NULL); + if (ret) + return ret; } return ret; From 9fc27cbabee6d2e63b0268ca709ad3129b3ac50d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 13 Nov 2025 13:24:10 -0500 Subject: [PATCH 152/283] drm/amdgpu: don't reemit ring contents more than once MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If we cancel a bad job and reemit the ring contents, and we get another timeout, cancel everything rather than reemitting. The wptr markers are only relevant for the original emit. If we reemit, the wptr markers are no longer correct. Reviewed-by: Timur Kristóf Signed-off-by: Alex Deucher (cherry picked from commit fb62a2067ca4555a6572d911e05919a311c010aa) --- drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 22 +++++++++++++++++----- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h | 2 ++ 2 files changed, 19 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c index c7843e336310..4f74a02a9a05 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c @@ -709,6 +709,7 @@ void amdgpu_fence_driver_guilty_force_completion(struct amdgpu_fence *af) struct amdgpu_ring *ring = af->ring; unsigned long flags; u32 seq, last_seq; + bool reemitted = false; last_seq = amdgpu_fence_read(ring) & ring->fence_drv.num_fences_mask; seq = ring->fence_drv.sync_seq & ring->fence_drv.num_fences_mask; @@ -726,7 +727,9 @@ void amdgpu_fence_driver_guilty_force_completion(struct amdgpu_fence *af) if (unprocessed && !dma_fence_is_signaled_locked(unprocessed)) { fence = container_of(unprocessed, struct amdgpu_fence, base); - if (fence == af) + if (fence->reemitted > 1) + reemitted = true; + else if (fence == af) dma_fence_set_error(&fence->base, -ETIME); else if (fence->context == af->context) dma_fence_set_error(&fence->base, -ECANCELED); @@ -734,9 +737,16 @@ void amdgpu_fence_driver_guilty_force_completion(struct amdgpu_fence *af) rcu_read_unlock(); } while (last_seq != seq); spin_unlock_irqrestore(&ring->fence_drv.lock, flags); - /* signal the guilty fence */ - amdgpu_fence_write(ring, (u32)af->base.seqno); - amdgpu_fence_process(ring); + + if (reemitted) { + /* if we've already reemitted once then just cancel everything */ + amdgpu_fence_driver_force_completion(af->ring); + af->ring->ring_backup_entries_to_copy = 0; + } else { + /* signal the guilty fence */ + amdgpu_fence_write(ring, (u32)af->base.seqno); + amdgpu_fence_process(ring); + } } void amdgpu_fence_save_wptr(struct amdgpu_fence *af) @@ -784,10 +794,12 @@ void amdgpu_ring_backup_unprocessed_commands(struct amdgpu_ring *ring, /* save everything if the ring is not guilty, otherwise * just save the content from other contexts. */ - if (!guilty_fence || (fence->context != guilty_fence->context)) + if (!fence->reemitted && + (!guilty_fence || (fence->context != guilty_fence->context))) amdgpu_ring_backup_unprocessed_command(ring, wptr, fence->wptr); wptr = fence->wptr; + fence->reemitted++; } rcu_read_unlock(); } while (last_seq != seq); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h index 7a27c6c4bb44..5044cf9e45fb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h @@ -148,6 +148,8 @@ struct amdgpu_fence { u64 wptr; /* fence context for resets */ u64 context; + /* has this fence been reemitted */ + unsigned int reemitted; }; extern const struct drm_sched_backend_ops amdgpu_sched_ops; From 531b43260928a53f4190f3e61de788551af6157e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 13 Nov 2025 14:12:10 -0500 Subject: [PATCH 153/283] drm/amdgpu: always backup and reemit fences MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If when we backup the ring contents for reemit before a ring reset, we skip jobs associated with the bad context, however, we need to make sure the fences are reemited as unprocessed submissions may depend on them. v2: clean up fence handling, make helpers static Reviewed-by: Timur Kristóf Signed-off-by: Alex Deucher (cherry picked from commit 155a748f14bc0b72783994dea7c5a12276730342) --- drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 24 ++++++++++++++++++----- drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h | 5 ++++- 2 files changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c index 4f74a02a9a05..06c333b2213b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c @@ -89,6 +89,16 @@ static u32 amdgpu_fence_read(struct amdgpu_ring *ring) return seq; } +static void amdgpu_fence_save_fence_wptr_start(struct amdgpu_fence *af) +{ + af->fence_wptr_start = af->ring->wptr; +} + +static void amdgpu_fence_save_fence_wptr_end(struct amdgpu_fence *af) +{ + af->fence_wptr_end = af->ring->wptr; +} + /** * amdgpu_fence_emit - emit a fence on the requested ring * @@ -116,8 +126,10 @@ int amdgpu_fence_emit(struct amdgpu_ring *ring, struct amdgpu_fence *af, &ring->fence_drv.lock, adev->fence_context + ring->idx, seq); + amdgpu_fence_save_fence_wptr_start(af); amdgpu_ring_emit_fence(ring, ring->fence_drv.gpu_addr, seq, flags | AMDGPU_FENCE_FLAG_INT); + amdgpu_fence_save_fence_wptr_end(af); amdgpu_fence_save_wptr(af); pm_runtime_get_noresume(adev_to_drm(adev)->dev); ptr = &ring->fence_drv.fences[seq & ring->fence_drv.num_fences_mask]; @@ -742,10 +754,6 @@ void amdgpu_fence_driver_guilty_force_completion(struct amdgpu_fence *af) /* if we've already reemitted once then just cancel everything */ amdgpu_fence_driver_force_completion(af->ring); af->ring->ring_backup_entries_to_copy = 0; - } else { - /* signal the guilty fence */ - amdgpu_fence_write(ring, (u32)af->base.seqno); - amdgpu_fence_process(ring); } } @@ -795,9 +803,15 @@ void amdgpu_ring_backup_unprocessed_commands(struct amdgpu_ring *ring, * just save the content from other contexts. */ if (!fence->reemitted && - (!guilty_fence || (fence->context != guilty_fence->context))) + (!guilty_fence || (fence->context != guilty_fence->context))) { amdgpu_ring_backup_unprocessed_command(ring, wptr, fence->wptr); + } else if (!fence->reemitted) { + /* always save the fence */ + amdgpu_ring_backup_unprocessed_command(ring, + fence->fence_wptr_start, + fence->fence_wptr_end); + } wptr = fence->wptr; fence->reemitted++; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h index 5044cf9e45fb..055437d4edf9 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h @@ -144,12 +144,15 @@ struct amdgpu_fence { struct amdgpu_ring *ring; ktime_t start_timestamp; - /* wptr for the fence for resets */ + /* wptr for the total submission for resets */ u64 wptr; /* fence context for resets */ u64 context; /* has this fence been reemitted */ unsigned int reemitted; + /* wptr for the fence for the submission */ + u64 fence_wptr_start; + u64 fence_wptr_end; }; extern const struct drm_sched_backend_ops amdgpu_sched_ops; From 7ed51e3a1381422278933d0d3ebda0268b6825de Mon Sep 17 00:00:00 2001 From: Pratap Nirujogi Date: Tue, 9 Dec 2025 20:22:15 -0500 Subject: [PATCH 154/283] drm/amd/amdgpu: Fix SMU warning during isp suspend-resume ISP mfd child devices are using genpd and the system suspend-resume operations between genpd and amdgpu parent device which uses only runtime suspend-resume are not in sync. Linux power manager during suspend-resume resuming the genpd devices earlier than the amdgpu parent device. This is resulting in the below warning as SMU is in suspended state when genpd attempts to resume ISP. WARNING: CPU: 13 PID: 5435 at drivers/gpu/drm/amd/amdgpu/../pm/swsmu/amdgpu_smu.c:398 smu_dpm_set_power_gate+0x36f/0x380 [amdgpu] To fix this warning isp suspend-resume is handled as part of amdgpu parent device suspend-resume instead of genpd sequence. Each ISP MFD child device is marked as dev_pm_syscore_device to skip genpd suspend-resume and use pm_runtime_force api's to suspend-resume the devices when callbacks from amdgpu are received. Co-developed-by: Gjorgji Rosikopulos Signed-off-by: Gjorgji Rosikopulos Signed-off-by: Bin Du Signed-off-by: Pratap Nirujogi Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Alex Deucher (cherry picked from commit 0288a345f19b2162546352161509bb24614729e1) --- drivers/gpu/drm/amd/amdgpu/amdgpu_isp.c | 24 +++++++++++++++ drivers/gpu/drm/amd/amdgpu/amdgpu_isp.h | 2 ++ drivers/gpu/drm/amd/amdgpu/isp_v4_1_1.c | 41 +++++++++++++++++++++++++ 3 files changed, 67 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_isp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_isp.c index 37270c4dab8d..532f83d783d1 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_isp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_isp.c @@ -318,12 +318,36 @@ void isp_kernel_buffer_free(void **buf_obj, u64 *gpu_addr, void **cpu_addr) } EXPORT_SYMBOL(isp_kernel_buffer_free); +static int isp_resume(struct amdgpu_ip_block *ip_block) +{ + struct amdgpu_device *adev = ip_block->adev; + struct amdgpu_isp *isp = &adev->isp; + + if (isp->funcs->hw_resume) + return isp->funcs->hw_resume(isp); + + return -ENODEV; +} + +static int isp_suspend(struct amdgpu_ip_block *ip_block) +{ + struct amdgpu_device *adev = ip_block->adev; + struct amdgpu_isp *isp = &adev->isp; + + if (isp->funcs->hw_suspend) + return isp->funcs->hw_suspend(isp); + + return -ENODEV; +} + static const struct amd_ip_funcs isp_ip_funcs = { .name = "isp_ip", .early_init = isp_early_init, .hw_init = isp_hw_init, .hw_fini = isp_hw_fini, .is_idle = isp_is_idle, + .suspend = isp_suspend, + .resume = isp_resume, .set_clockgating_state = isp_set_clockgating_state, .set_powergating_state = isp_set_powergating_state, }; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_isp.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_isp.h index d6f4ffa4c97c..9a5d2b1dff9e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_isp.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_isp.h @@ -38,6 +38,8 @@ struct amdgpu_isp; struct isp_funcs { int (*hw_init)(struct amdgpu_isp *isp); int (*hw_fini)(struct amdgpu_isp *isp); + int (*hw_suspend)(struct amdgpu_isp *isp); + int (*hw_resume)(struct amdgpu_isp *isp); }; struct amdgpu_isp { diff --git a/drivers/gpu/drm/amd/amdgpu/isp_v4_1_1.c b/drivers/gpu/drm/amd/amdgpu/isp_v4_1_1.c index 4258d3e0b706..0002bcc6c4ec 100644 --- a/drivers/gpu/drm/amd/amdgpu/isp_v4_1_1.c +++ b/drivers/gpu/drm/amd/amdgpu/isp_v4_1_1.c @@ -26,6 +26,7 @@ */ #include +#include #include "amdgpu.h" #include "isp_v4_1_1.h" @@ -145,6 +146,9 @@ static int isp_genpd_add_device(struct device *dev, void *data) return -ENODEV; } + /* The devices will be managed by the pm ops from the parent */ + dev_pm_syscore_device(dev, true); + exit: /* Continue to add */ return 0; @@ -177,12 +181,47 @@ static int isp_genpd_remove_device(struct device *dev, void *data) drm_err(&adev->ddev, "Failed to remove dev from genpd %d\n", ret); return -ENODEV; } + dev_pm_syscore_device(dev, false); exit: /* Continue to remove */ return 0; } +static int isp_suspend_device(struct device *dev, void *data) +{ + return pm_runtime_force_suspend(dev); +} + +static int isp_resume_device(struct device *dev, void *data) +{ + return pm_runtime_force_resume(dev); +} + +static int isp_v4_1_1_hw_suspend(struct amdgpu_isp *isp) +{ + int r; + + r = device_for_each_child(isp->parent, NULL, + isp_suspend_device); + if (r) + dev_err(isp->parent, "failed to suspend hw devices (%d)\n", r); + + return r; +} + +static int isp_v4_1_1_hw_resume(struct amdgpu_isp *isp) +{ + int r; + + r = device_for_each_child(isp->parent, NULL, + isp_resume_device); + if (r) + dev_err(isp->parent, "failed to resume hw device (%d)\n", r); + + return r; +} + static int isp_v4_1_1_hw_init(struct amdgpu_isp *isp) { const struct software_node *amd_camera_node, *isp4_node; @@ -369,6 +408,8 @@ static int isp_v4_1_1_hw_fini(struct amdgpu_isp *isp) static const struct isp_funcs isp_v4_1_1_funcs = { .hw_init = isp_v4_1_1_hw_init, .hw_fini = isp_v4_1_1_hw_fini, + .hw_suspend = isp_v4_1_1_hw_suspend, + .hw_resume = isp_v4_1_1_hw_resume, }; void isp_v4_1_1_set_isp_funcs(struct amdgpu_isp *isp) From fd40c146c8ed7f7e8ae36922dcc583bd0ca70b75 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Sat, 6 Dec 2025 03:31:03 +0100 Subject: [PATCH 155/283] drm/amd/display: Correct color depth for SelectCRTC_Source MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pass the correct enum values as expected by the VBIOS. Previously the actual bit depth integer value was passed, which was a mistake. Fixes: 7fb4f254c8eb ("drm/amd/display: Add SelectCRTC_Source to BIOS parser") Reviewed-by: Alex Deucher Signed-off-by: Timur Kristóf Signed-off-by: Alex Deucher (cherry picked from commit cdf6e4c0cdab129ffc4e41a8ac53a0738f805072) --- .../drm/amd/display/dc/bios/command_table.c | 25 ++++++++++++++++- .../amd/display/dc/hwss/dce110/dce110_hwseq.c | 28 +------------------ .../amd/display/include/bios_parser_types.h | 2 +- 3 files changed, 26 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/bios/command_table.c b/drivers/gpu/drm/amd/display/dc/bios/command_table.c index 22457f417e65..d56c0d3763dd 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/command_table.c +++ b/drivers/gpu/drm/amd/display/dc/bios/command_table.c @@ -1797,7 +1797,30 @@ static enum bp_result select_crtc_source_v3( ¶ms.ucEncodeMode)) return BP_RESULT_BADINPUT; - params.ucDstBpc = bp_params->bit_depth; + switch (bp_params->color_depth) { + case COLOR_DEPTH_UNDEFINED: + params.ucDstBpc = PANEL_BPC_UNDEFINE; + break; + case COLOR_DEPTH_666: + params.ucDstBpc = PANEL_6BIT_PER_COLOR; + break; + default: + case COLOR_DEPTH_888: + params.ucDstBpc = PANEL_8BIT_PER_COLOR; + break; + case COLOR_DEPTH_101010: + params.ucDstBpc = PANEL_10BIT_PER_COLOR; + break; + case COLOR_DEPTH_121212: + params.ucDstBpc = PANEL_12BIT_PER_COLOR; + break; + case COLOR_DEPTH_141414: + dm_error("14-bit color not supported by SelectCRTC_Source v3\n"); + break; + case COLOR_DEPTH_161616: + params.ucDstBpc = PANEL_16BIT_PER_COLOR; + break; + } if (EXEC_BIOS_CMD_TABLE(SelectCRTC_Source, params)) result = BP_RESULT_OK; diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c index 0cdd8c74abdf..ebd74b43e935 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c @@ -1610,38 +1610,12 @@ dce110_select_crtc_source(struct pipe_ctx *pipe_ctx) struct dc_bios *bios = link->ctx->dc_bios; struct bp_crtc_source_select crtc_source_select = {0}; enum engine_id engine_id = link->link_enc->preferred_engine; - uint8_t bit_depth; if (dc_is_rgb_signal(pipe_ctx->stream->signal)) engine_id = link->link_enc->analog_engine; - switch (pipe_ctx->stream->timing.display_color_depth) { - case COLOR_DEPTH_UNDEFINED: - bit_depth = 0; - break; - case COLOR_DEPTH_666: - bit_depth = 6; - break; - default: - case COLOR_DEPTH_888: - bit_depth = 8; - break; - case COLOR_DEPTH_101010: - bit_depth = 10; - break; - case COLOR_DEPTH_121212: - bit_depth = 12; - break; - case COLOR_DEPTH_141414: - bit_depth = 14; - break; - case COLOR_DEPTH_161616: - bit_depth = 16; - break; - } - crtc_source_select.controller_id = CONTROLLER_ID_D0 + pipe_ctx->stream_res.tg->inst; - crtc_source_select.bit_depth = bit_depth; + crtc_source_select.color_depth = pipe_ctx->stream->timing.display_color_depth; crtc_source_select.engine_id = engine_id; crtc_source_select.sink_signal = pipe_ctx->stream->signal; diff --git a/drivers/gpu/drm/amd/display/include/bios_parser_types.h b/drivers/gpu/drm/amd/display/include/bios_parser_types.h index 973b6bdbac63..f40dc612ec73 100644 --- a/drivers/gpu/drm/amd/display/include/bios_parser_types.h +++ b/drivers/gpu/drm/amd/display/include/bios_parser_types.h @@ -136,7 +136,7 @@ struct bp_crtc_source_select { enum engine_id engine_id; enum controller_id controller_id; enum signal_type sink_signal; - uint8_t bit_depth; + enum dc_color_depth color_depth; }; struct bp_transmitter_control { From e0d20a7658129fc681e392ba27edea99b77c2e21 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Sat, 6 Dec 2025 03:31:04 +0100 Subject: [PATCH 156/283] drm/amd/display: Add missing encoder setup to DACnEncoderControl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Apparently the DAC encoder needs to be set up before use. The BIOS parser in DC did not support this so I assumed it was not necessary, but the DAC doesn't work without it on some GPUs. Fixes: 69b29b894660 ("drm/amd/display: Hook up DAC to bios_parser_encoder_control") Reviewed-by: Alex Deucher Signed-off-by: Timur Kristóf Signed-off-by: Alex Deucher (cherry picked from commit bb5dfe2f5630ce344c654c705d28b4e20cb9d334) --- .../gpu/drm/amd/display/dc/bios/bios_parser.c | 4 ++-- .../drm/amd/display/dc/bios/command_table.c | 19 +++++++++++-------- .../drm/amd/display/dc/bios/command_table.h | 4 ++-- 3 files changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser.c index d1471f34e419..9f11e6ca4051 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser.c +++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser.c @@ -763,14 +763,14 @@ static enum bp_result bios_parser_encoder_control( return BP_RESULT_FAILURE; return bp->cmd_tbl.dac1_encoder_control( - bp, cntl->action == ENCODER_CONTROL_ENABLE, + bp, cntl->action, cntl->pixel_clock, ATOM_DAC1_PS2); } else if (cntl->engine_id == ENGINE_ID_DACB) { if (!bp->cmd_tbl.dac2_encoder_control) return BP_RESULT_FAILURE; return bp->cmd_tbl.dac2_encoder_control( - bp, cntl->action == ENCODER_CONTROL_ENABLE, + bp, cntl->action, cntl->pixel_clock, ATOM_DAC1_PS2); } diff --git a/drivers/gpu/drm/amd/display/dc/bios/command_table.c b/drivers/gpu/drm/amd/display/dc/bios/command_table.c index d56c0d3763dd..76a3559f0ddc 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/command_table.c +++ b/drivers/gpu/drm/amd/display/dc/bios/command_table.c @@ -1838,12 +1838,12 @@ static enum bp_result select_crtc_source_v3( static enum bp_result dac1_encoder_control_v1( struct bios_parser *bp, - bool enable, + enum bp_encoder_control_action action, uint32_t pixel_clock, uint8_t dac_standard); static enum bp_result dac2_encoder_control_v1( struct bios_parser *bp, - bool enable, + enum bp_encoder_control_action action, uint32_t pixel_clock, uint8_t dac_standard); @@ -1869,12 +1869,15 @@ static void init_dac_encoder_control(struct bios_parser *bp) static void dac_encoder_control_prepare_params( DAC_ENCODER_CONTROL_PS_ALLOCATION *params, - bool enable, + enum bp_encoder_control_action action, uint32_t pixel_clock, uint8_t dac_standard) { params->ucDacStandard = dac_standard; - if (enable) + if (action == ENCODER_CONTROL_SETUP || + action == ENCODER_CONTROL_INIT) + params->ucAction = ATOM_ENCODER_INIT; + else if (action == ENCODER_CONTROL_ENABLE) params->ucAction = ATOM_ENABLE; else params->ucAction = ATOM_DISABLE; @@ -1887,7 +1890,7 @@ static void dac_encoder_control_prepare_params( static enum bp_result dac1_encoder_control_v1( struct bios_parser *bp, - bool enable, + enum bp_encoder_control_action action, uint32_t pixel_clock, uint8_t dac_standard) { @@ -1896,7 +1899,7 @@ static enum bp_result dac1_encoder_control_v1( dac_encoder_control_prepare_params( ¶ms, - enable, + action, pixel_clock, dac_standard); @@ -1908,7 +1911,7 @@ static enum bp_result dac1_encoder_control_v1( static enum bp_result dac2_encoder_control_v1( struct bios_parser *bp, - bool enable, + enum bp_encoder_control_action action, uint32_t pixel_clock, uint8_t dac_standard) { @@ -1917,7 +1920,7 @@ static enum bp_result dac2_encoder_control_v1( dac_encoder_control_prepare_params( ¶ms, - enable, + action, pixel_clock, dac_standard); diff --git a/drivers/gpu/drm/amd/display/dc/bios/command_table.h b/drivers/gpu/drm/amd/display/dc/bios/command_table.h index e89b1ba0048b..78bdbcaa61c8 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/command_table.h +++ b/drivers/gpu/drm/amd/display/dc/bios/command_table.h @@ -57,12 +57,12 @@ struct cmd_tbl { struct bp_crtc_source_select *bp_params); enum bp_result (*dac1_encoder_control)( struct bios_parser *bp, - bool enable, + enum bp_encoder_control_action action, uint32_t pixel_clock, uint8_t dac_standard); enum bp_result (*dac2_encoder_control)( struct bios_parser *bp, - bool enable, + enum bp_encoder_control_action action, uint32_t pixel_clock, uint8_t dac_standard); enum bp_result (*dac1_output_control)( From 72d7f4573660287f1b66c30319efecd6fcde92ee Mon Sep 17 00:00:00 2001 From: Alan Liu Date: Mon, 22 Dec 2025 12:26:35 +0800 Subject: [PATCH 157/283] drm/amdgpu: Fix query for VPE block_type and ip_count [Why] Query for VPE block_type and ip_count is missing. [How] Add VPE case in ip_block_type and hw_ip_count query. Reviewed-by: Lang Yu Signed-off-by: Alan Liu Signed-off-by: Alex Deucher (cherry picked from commit a6ea0a430aca5932b9c75d8e38deeb45665dd2ae) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 6ee77f431d56..f65edd80cabf 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -201,6 +201,9 @@ static enum amd_ip_block_type type = (amdgpu_device_ip_get_ip_block(adev, AMD_IP_BLOCK_TYPE_JPEG)) ? AMD_IP_BLOCK_TYPE_JPEG : AMD_IP_BLOCK_TYPE_VCN; break; + case AMDGPU_HW_IP_VPE: + type = AMD_IP_BLOCK_TYPE_VPE; + break; default: type = AMD_IP_BLOCK_TYPE_NUM; break; @@ -721,6 +724,9 @@ int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) case AMD_IP_BLOCK_TYPE_UVD: count = adev->uvd.num_uvd_inst; break; + case AMD_IP_BLOCK_TYPE_VPE: + count = adev->vpe.num_instances; + break; /* For all other IP block types not listed in the switch statement * the ip status is valid here and the instance count is one. */ From e4fdbca2dc774366aca6532b57bfcdaae29aaf63 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 5 Jan 2026 11:42:05 -0700 Subject: [PATCH 158/283] io_uring/io-wq: remove io_wq_for_each_worker() return value The only use of this helper is to iterate all of the workers, and hence all callers will pass in a func that always returns false to do that. As none of the callers use the return value, get rid of it. Reviewed-by: Gabriel Krisman Bertazi Signed-off-by: Jens Axboe --- io_uring/io-wq.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/io_uring/io-wq.c b/io_uring/io-wq.c index 6c5ef629e59a..9fd9f6ab722c 100644 --- a/io_uring/io-wq.c +++ b/io_uring/io-wq.c @@ -947,16 +947,13 @@ static bool io_acct_for_each_worker(struct io_wq_acct *acct, return ret; } -static bool io_wq_for_each_worker(struct io_wq *wq, +static void io_wq_for_each_worker(struct io_wq *wq, bool (*func)(struct io_worker *, void *), void *data) { - for (int i = 0; i < IO_WQ_ACCT_NR; i++) { + for (int i = 0; i < IO_WQ_ACCT_NR; i++) if (io_acct_for_each_worker(&wq->acct[i], func, data)) - return true; - } - - return false; + break; } static bool io_wq_worker_wake(struct io_worker *worker, void *data) From c0fe2994f9a9d0a2ec9e42441ea5ba74b6a16176 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Mon, 5 Jan 2026 19:23:19 +0100 Subject: [PATCH 159/283] libceph: make calc_target() set t->paused, not just clear it Currently calc_target() clears t->paused if the request shouldn't be paused anymore, but doesn't ever set t->paused even though it's able to determine when the request should be paused. Setting t->paused is left to __submit_request() which is fine for regular requests but doesn't work for linger requests -- since __submit_request() doesn't operate on linger requests, there is nowhere for lreq->t.paused to be set. One consequence of this is that watches don't get reestablished on paused -> unpaused transitions in cases where requests have been paused long enough for the (paused) unwatch request to time out and for the subsequent (re)watch request to enter the paused state. On top of the watch not getting reestablished, rbd_reregister_watch() gets stuck with rbd_dev->watch_mutex held: rbd_register_watch __rbd_register_watch ceph_osdc_watch linger_reg_commit_wait It's waiting for lreq->reg_commit_wait to be completed, but for that to happen the respective request needs to end up on need_resend_linger list and be kicked when requests are unpaused. There is no chance for that if the request in question is never marked paused in the first place. The fact that rbd_dev->watch_mutex remains taken out forever then prevents the image from getting unmapped -- "rbd unmap" would inevitably hang in D state on an attempt to grab the mutex. Cc: stable@vger.kernel.org Reported-by: Raphael Zimmer Signed-off-by: Ilya Dryomov Reviewed-by: Viacheslav Dubeyko --- net/ceph/osd_client.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index 1a7be2f615dc..610e584524d1 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -1586,6 +1586,7 @@ static enum calc_target_result calc_target(struct ceph_osd_client *osdc, struct ceph_pg_pool_info *pi; struct ceph_pg pgid, last_pgid; struct ceph_osds up, acting; + bool should_be_paused; bool is_read = t->flags & CEPH_OSD_FLAG_READ; bool is_write = t->flags & CEPH_OSD_FLAG_WRITE; bool force_resend = false; @@ -1654,10 +1655,16 @@ static enum calc_target_result calc_target(struct ceph_osd_client *osdc, &last_pgid)) force_resend = true; - if (t->paused && !target_should_be_paused(osdc, t, pi)) { - t->paused = false; + should_be_paused = target_should_be_paused(osdc, t, pi); + if (t->paused && !should_be_paused) { unpaused = true; } + if (t->paused != should_be_paused) { + dout("%s t %p paused %d -> %d\n", __func__, t, t->paused, + should_be_paused); + t->paused = should_be_paused; + } + legacy_change = ceph_pg_compare(&t->pgid, &pgid) || ceph_osds_changed(&t->acting, &acting, t->used_replica || any_change); From ce5e612dd411de096aa041b9e9325ba1bec5f9f4 Mon Sep 17 00:00:00 2001 From: Michal Luczaj Date: Mon, 29 Dec 2025 20:43:10 +0100 Subject: [PATCH 160/283] vsock: Make accept()ed sockets use custom setsockopt() SO_ZEROCOPY handling in vsock_connectible_setsockopt() does not get called on accept()ed sockets due to a missing flag. Flip it. Fixes: e0718bd82e27 ("vsock: enable setting SO_ZEROCOPY") Signed-off-by: Michal Luczaj Link: https://patch.msgid.link/20251229-vsock-child-sock-custom-sockopt-v2-1-64778d6c4f88@rbox.co Signed-off-by: Jakub Kicinski --- net/vmw_vsock/af_vsock.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index adcba1b7bf74..a3505a4dcee0 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -1787,6 +1787,10 @@ static int vsock_accept(struct socket *sock, struct socket *newsock, } else { newsock->state = SS_CONNECTED; sock_graft(connected, newsock); + + set_bit(SOCK_CUSTOM_SOCKOPT, + &connected->sk_socket->flags); + if (vsock_msgzerocopy_allow(vconnected->transport)) set_bit(SOCK_SUPPORT_ZC, &connected->sk_socket->flags); From caa20e9e155b9d2afcf658e2909659c0be45ec12 Mon Sep 17 00:00:00 2001 From: Michal Luczaj Date: Mon, 29 Dec 2025 20:43:11 +0100 Subject: [PATCH 161/283] vsock/test: Test setting SO_ZEROCOPY on accept()ed socket Make sure setsockopt(SOL_SOCKET, SO_ZEROCOPY) on an accept()ed socket is handled by vsock's implementation. Reviewed-by: Stefano Garzarella Signed-off-by: Michal Luczaj Link: https://patch.msgid.link/20251229-vsock-child-sock-custom-sockopt-v2-2-64778d6c4f88@rbox.co Signed-off-by: Jakub Kicinski --- tools/testing/vsock/vsock_test.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/tools/testing/vsock/vsock_test.c b/tools/testing/vsock/vsock_test.c index 9e1250790f33..bbe3723babdc 100644 --- a/tools/testing/vsock/vsock_test.c +++ b/tools/testing/vsock/vsock_test.c @@ -2192,6 +2192,33 @@ static void test_stream_nolinger_server(const struct test_opts *opts) close(fd); } +static void test_stream_accepted_setsockopt_client(const struct test_opts *opts) +{ + int fd; + + fd = vsock_stream_connect(opts->peer_cid, opts->peer_port); + if (fd < 0) { + perror("connect"); + exit(EXIT_FAILURE); + } + + close(fd); +} + +static void test_stream_accepted_setsockopt_server(const struct test_opts *opts) +{ + int fd; + + fd = vsock_stream_accept(VMADDR_CID_ANY, opts->peer_port, NULL); + if (fd < 0) { + perror("accept"); + exit(EXIT_FAILURE); + } + + enable_so_zerocopy_check(fd); + close(fd); +} + static struct test_case test_cases[] = { { .name = "SOCK_STREAM connection reset", @@ -2371,6 +2398,11 @@ static struct test_case test_cases[] = { .run_client = test_seqpacket_unread_bytes_client, .run_server = test_seqpacket_unread_bytes_server, }, + { + .name = "SOCK_STREAM accept()ed socket custom setsockopt()", + .run_client = test_stream_accepted_setsockopt_client, + .run_server = test_stream_accepted_setsockopt_server, + }, {}, }; From 1aff297ffb925ee49299f86af5fcdf854cb48c5f Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Sun, 7 Dec 2025 14:53:20 +1030 Subject: [PATCH 162/283] btrfs: avoid access-beyond-folio for bs > ps encoded writes [POTENTIAL BUG] If the system page size is 4K and fs block size is 8K, and max_inline mount option is set to 6K, we can inline a 6K sized data extent. Then a encoded write submitted a compressed extent which is at file offset 0, and the compressed length is 6K, which is allowed to be inlined. Now a read beyond page boundary is triggered inside write_extent_buffer() from insert_inline_extent(). [CAUSE] Currently the function __cow_file_range_inline() can only accept a single folio. For regular compressed write path, we always allocate the compressed folios using the minimal order matching the block size, thus the @compressed_folio should always cover a full fs block thus it is fine. But for encoded writes, they allocate page size folios, this means we can hit a case where the compressed data is smaller than block size but still larger than page size, in that case __cow_file_range_inline() will be called with @compressed_size larger than a page. In that case we will trigger a read beyond the folio inside insert_inline_extent(). Thankfully this is not that common, as the default max_inline is only 2048 bytes, smaller than PAGE_SIZE, and bs > ps support is still experimental. [FIX] We need to either allow insert_inline_extent() to accept a page array to properly support such case, or reject such inline extent. The latter is a much simpler solution, and considering bs > ps will stay as a corner case and non-default max_inline will be even rarer, I don't think we really need to fulfill such niche. So just reject any inline extent that's larger than PAGE_SIZE, and add an extra ASSERT() to insert_inline_extent() to catch such beyond-boundary access. Fixes: ec20799064c8 ("btrfs: enable encoded read/write/send for bs > ps cases") Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 03337fa7a61c..bfb8e98d8c02 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -480,13 +480,15 @@ static int insert_inline_extent(struct btrfs_trans_handle *trans, ASSERT(size <= sectorsize); /* - * The compressed size also needs to be no larger than a sector. - * That's also why we only need one page as the parameter. + * The compressed size also needs to be no larger than a page. + * That's also why we only need one folio as the parameter. */ - if (compressed_folio) + if (compressed_folio) { ASSERT(compressed_size <= sectorsize); - else + ASSERT(compressed_size <= PAGE_SIZE); + } else { ASSERT(compressed_size == 0); + } if (compressed_size && compressed_folio) cur_size = compressed_size; @@ -573,6 +575,18 @@ static bool can_cow_file_range_inline(struct btrfs_inode *inode, if (offset != 0) return false; + /* + * Even for bs > ps cases, cow_file_range_inline() can only accept a + * single folio. + * + * This can be problematic and cause access beyond page boundary if a + * page sized folio is passed into that function. + * And encoded write is doing exactly that. + * So here limits the inlined extent size to PAGE_SIZE. + */ + if (size > PAGE_SIZE || compressed_size > PAGE_SIZE) + return false; + /* Inline extents are limited to sectorsize. */ if (size > fs_info->sectorsize) return false; From 8731f2c50b0b1d2b58ed5b9671ef2c4bdc2f8347 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Tue, 16 Dec 2025 14:51:52 +0000 Subject: [PATCH 163/283] btrfs: release path before initializing extent tree in btrfs_read_locked_inode() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In btrfs_read_locked_inode() we are calling btrfs_init_file_extent_tree() while holding a path with a read locked leaf from a subvolume tree, and btrfs_init_file_extent_tree() may do a GFP_KERNEL allocation, which can trigger reclaim. This can create a circular lock dependency which lockdep warns about with the following splat: [6.1433] ====================================================== [6.1574] WARNING: possible circular locking dependency detected [6.1583] 6.18.0+ #4 Tainted: G U [6.1591] ------------------------------------------------------ [6.1599] kswapd0/117 is trying to acquire lock: [6.1606] ffff8d9b6333c5b8 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1625] but task is already holding lock: [6.1633] ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60 [6.1646] which lock already depends on the new lock. [6.1657] the existing dependency chain (in reverse order) is: [6.1667] -> #2 (fs_reclaim){+.+.}-{0:0}: [6.1677] fs_reclaim_acquire+0x9d/0xd0 [6.1685] __kmalloc_cache_noprof+0x59/0x750 [6.1694] btrfs_init_file_extent_tree+0x90/0x100 [6.1702] btrfs_read_locked_inode+0xc3/0x6b0 [6.1710] btrfs_iget+0xbb/0xf0 [6.1716] btrfs_lookup_dentry+0x3c5/0x8e0 [6.1724] btrfs_lookup+0x12/0x30 [6.1731] lookup_open.isra.0+0x1aa/0x6a0 [6.1739] path_openat+0x5f7/0xc60 [6.1746] do_filp_open+0xd6/0x180 [6.1753] do_sys_openat2+0x8b/0xe0 [6.1760] __x64_sys_openat+0x54/0xa0 [6.1768] do_syscall_64+0x97/0x3e0 [6.1776] entry_SYSCALL_64_after_hwframe+0x76/0x7e [6.1784] -> #1 (btrfs-tree-00){++++}-{3:3}: [6.1794] lock_release+0x127/0x2a0 [6.1801] up_read+0x1b/0x30 [6.1808] btrfs_search_slot+0x8e0/0xff0 [6.1817] btrfs_lookup_inode+0x52/0xd0 [6.1825] __btrfs_update_delayed_inode+0x73/0x520 [6.1833] btrfs_commit_inode_delayed_inode+0x11a/0x120 [6.1842] btrfs_log_inode+0x608/0x1aa0 [6.1849] btrfs_log_inode_parent+0x249/0xf80 [6.1857] btrfs_log_dentry_safe+0x3e/0x60 [6.1865] btrfs_sync_file+0x431/0x690 [6.1872] do_fsync+0x39/0x80 [6.1879] __x64_sys_fsync+0x13/0x20 [6.1887] do_syscall_64+0x97/0x3e0 [6.1894] entry_SYSCALL_64_after_hwframe+0x76/0x7e [6.1903] -> #0 (&delayed_node->mutex){+.+.}-{3:3}: [6.1913] __lock_acquire+0x15e9/0x2820 [6.1920] lock_acquire+0xc9/0x2d0 [6.1927] __mutex_lock+0xcc/0x10a0 [6.1934] __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1944] btrfs_evict_inode+0x20b/0x4b0 [6.1952] evict+0x15a/0x2f0 [6.1958] prune_icache_sb+0x91/0xd0 [6.1966] super_cache_scan+0x150/0x1d0 [6.1974] do_shrink_slab+0x155/0x6f0 [6.1981] shrink_slab+0x48e/0x890 [6.1988] shrink_one+0x11a/0x1f0 [6.1995] shrink_node+0xbfd/0x1320 [6.1002] balance_pgdat+0x67f/0xc60 [6.1321] kswapd+0x1dc/0x3e0 [6.1643] kthread+0xff/0x240 [6.1965] ret_from_fork+0x223/0x280 [6.1287] ret_from_fork_asm+0x1a/0x30 [6.1616] other info that might help us debug this: [6.1561] Chain exists of: &delayed_node->mutex --> btrfs-tree-00 --> fs_reclaim [6.1503] Possible unsafe locking scenario: [6.1110] CPU0 CPU1 [6.1411] ---- ---- [6.1707] lock(fs_reclaim); [6.1998] lock(btrfs-tree-00); [6.1291] lock(fs_reclaim); [6.1581] lock(&delayed_node->mutex); [6.1874] *** DEADLOCK *** [6.1716] 2 locks held by kswapd0/117: [6.1999] #0: ffffffffa4ab8ce0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x195/0xc60 [6.1294] #1: ffff8d998344b0e0 (&type->s_umount_key#40){++++}- {3:3}, at: super_cache_scan+0x37/0x1d0 [6.1596] stack backtrace: [6.1183] CPU: 11 UID: 0 PID: 117 Comm: kswapd0 Tainted: G U 6.18.0+ #4 PREEMPT(lazy) [6.1185] Tainted: [U]=USER [6.1186] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023 [6.1187] Call Trace: [6.1187] [6.1189] dump_stack_lvl+0x6e/0xa0 [6.1192] print_circular_bug.cold+0x17a/0x1c0 [6.1194] check_noncircular+0x175/0x190 [6.1197] __lock_acquire+0x15e9/0x2820 [6.1200] lock_acquire+0xc9/0x2d0 [6.1201] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1204] __mutex_lock+0xcc/0x10a0 [6.1206] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1208] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1211] ? __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1213] __btrfs_release_delayed_node.part.0+0x39/0x2f0 [6.1215] btrfs_evict_inode+0x20b/0x4b0 [6.1217] ? lock_acquire+0xc9/0x2d0 [6.1220] evict+0x15a/0x2f0 [6.1222] prune_icache_sb+0x91/0xd0 [6.1224] super_cache_scan+0x150/0x1d0 [6.1226] do_shrink_slab+0x155/0x6f0 [6.1228] shrink_slab+0x48e/0x890 [6.1229] ? shrink_slab+0x2d2/0x890 [6.1231] shrink_one+0x11a/0x1f0 [6.1234] shrink_node+0xbfd/0x1320 [6.1236] ? shrink_node+0xa2d/0x1320 [6.1236] ? shrink_node+0xbd3/0x1320 [6.1239] ? balance_pgdat+0x67f/0xc60 [6.1239] balance_pgdat+0x67f/0xc60 [6.1241] ? finish_task_switch.isra.0+0xc4/0x2a0 [6.1246] kswapd+0x1dc/0x3e0 [6.1247] ? __pfx_autoremove_wake_function+0x10/0x10 [6.1249] ? __pfx_kswapd+0x10/0x10 [6.1250] kthread+0xff/0x240 [6.1251] ? __pfx_kthread+0x10/0x10 [6.1253] ret_from_fork+0x223/0x280 [6.1255] ? __pfx_kthread+0x10/0x10 [6.1257] ret_from_fork_asm+0x1a/0x30 [6.1260] This is because: 1) The fsync task is holding an inode's delayed node mutex (for a directory) while calling __btrfs_update_delayed_inode() and that needs to do a search on the subvolume's btree (therefore read lock some extent buffers); 2) The lookup task, at btrfs_lookup(), triggered reclaim with the GFP_KERNEL allocation done by btrfs_init_file_extent_tree() while holding a read lock on a subvolume leaf; 3) The reclaim triggered kswapd which is doing inode eviction for the directory inode the fsync task is using as an argument to btrfs_commit_inode_delayed_inode() - but in that call chain we are trying to read lock the same leaf that the lookup task is holding while calling btrfs_init_file_extent_tree() and doing the GFP_KERNEL allocation. Fix this by calling btrfs_init_file_extent_tree() after we don't need the path anymore and release it in btrfs_read_locked_inode(). Reported-by: Thomas Hellström Link: https://lore.kernel.org/linux-btrfs/6e55113a22347c3925458a5d840a18401a38b276.camel@linux.intel.com/ Fixes: 8679d2687c35 ("btrfs: initialize inode::file_extent_tree after i_mode has been set") Reviewed-by: Qu Wenruo Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/inode.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index bfb8e98d8c02..5ea1c392bbc7 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4046,11 +4046,6 @@ static int btrfs_read_locked_inode(struct btrfs_inode *inode, struct btrfs_path btrfs_set_inode_mapping_order(inode); cache_index: - ret = btrfs_init_file_extent_tree(inode); - if (ret) - goto out; - btrfs_inode_set_file_extent_range(inode, 0, - round_up(i_size_read(vfs_inode), fs_info->sectorsize)); /* * If we were modified in the current generation and evicted from memory * and then re-read we need to do a full sync since we don't have any @@ -4137,6 +4132,20 @@ cache_acl: btrfs_ino(inode), btrfs_root_id(root), ret); } + /* + * We don't need the path anymore, so release it to avoid holding a read + * lock on a leaf while calling btrfs_init_file_extent_tree(), which can + * allocate memory that triggers reclaim (GFP_KERNEL) and cause a locking + * dependency. + */ + btrfs_release_path(path); + + ret = btrfs_init_file_extent_tree(inode); + if (ret) + goto out; + btrfs_inode_set_file_extent_range(inode, 0, + round_up(i_size_read(vfs_inode), fs_info->sectorsize)); + if (!maybe_acls) cache_no_acl(vfs_inode); From 30bcf4e824aa37d305502f52e1527c7b1eabef3d Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Thu, 18 Dec 2025 15:15:28 +1030 Subject: [PATCH 164/283] btrfs: only enforce free space tree if v1 cache is required for bs < ps cases [BUG] Since the introduction of btrfs bs < ps support, v1 cache was never on the plan due to its hard coded PAGE_SIZE usage, and the future plan to properly deprecate it. However for bs < ps cases, even if 'nospace_cache,clear_cache' mount option is specified, it's never respected and free space tree is always enabled: mkfs.btrfs -f -O ^bgt,fst $dev mount $dev $mnt -o clear_cache,nospace_cache umount $mnt btrfs ins dump-super $dev ... compat_ro_flags 0x3 ( FREE_SPACE_TREE | FREE_SPACE_TREE_VALID ) ... This means a different behavior compared to bs >= ps cases. [CAUSE] The forcing usage of v2 space cache is done inside btrfs_set_free_space_cache_settings(), however it never checks if we're even using space cache but always enabling v2 cache. [FIX] Instead unconditionally enable v2 cache, only forcing v2 cache if the old v1 cache is required. Now v2 space cache can be properly disabled on bs < ps cases: mkfs.btrfs -f -O ^bgt,fst $dev mount $dev $mnt -o clear_cache,nospace_cache umount $mnt btrfs ins dump-super $dev ... compat_ro_flags 0x0 ... Fixes: 9f73f1aef98b ("btrfs: force v2 space cache usage for subpage mount") Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/super.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 1999533b52be..9f8546498818 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -736,14 +736,12 @@ bool btrfs_check_options(const struct btrfs_fs_info *info, */ void btrfs_set_free_space_cache_settings(struct btrfs_fs_info *fs_info) { - if (fs_info->sectorsize < PAGE_SIZE) { + if (fs_info->sectorsize < PAGE_SIZE && btrfs_test_opt(fs_info, SPACE_CACHE)) { + btrfs_info(fs_info, + "forcing free space tree for sector size %u with page size %lu", + fs_info->sectorsize, PAGE_SIZE); btrfs_clear_opt(fs_info->mount_opt, SPACE_CACHE); - if (!btrfs_test_opt(fs_info, FREE_SPACE_TREE)) { - btrfs_info(fs_info, - "forcing free space tree for sector size %u with page size %lu", - fs_info->sectorsize, PAGE_SIZE); - btrfs_set_opt(fs_info->mount_opt, FREE_SPACE_TREE); - } + btrfs_set_opt(fs_info->mount_opt, FREE_SPACE_TREE); } /* From cefd80925180a85c818e18c2876911b002a595fd Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Thu, 18 Dec 2025 15:15:29 +1030 Subject: [PATCH 165/283] btrfs: force free space tree for bs > ps cases [BUG] Currently we only enforcing the free space tree for bs < ps cases, but with the recently added bs > ps support, we lack the free space tree enforcing, causing explicit v1 cache mount option to fail on bs > ps cases: # mount -o space_cache=v1 /dev/test/scratch1 /mnt/btrfs/ mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/mapper/test-scratch1, missing codepage or helper program, or other error. dmesg(1) may have more information after failed mount system call. # dmesg -t | tail -n7 BTRFS: device fsid ac14a6fa-4ec9-449e-aec9-7d1777bfdc06 devid 1 transid 11 /dev/mapper/test-scratch1 (253:3) scanned by mount (2849) BTRFS info (device dm-3): first mount of filesystem ac14a6fa-4ec9-449e-aec9-7d1777bfdc06 BTRFS info (device dm-3): using crc32c checksum algorithm BTRFS warning (device dm-3): support for block size 8192 with page size 4096 is experimental, some features may be missing BTRFS warning (device dm-3): space cache v1 is being deprecated and will be removed in a future release, please use -o space_cache=v2 BTRFS warning (device dm-3): v1 space cache is not supported for page size 4096 with sectorsize 8192 BTRFS error (device dm-3): open_ctree failed: -22 [FIX] Just enable the same free space tree for bs > ps cases, aligning the behavior to bs < ps cases. Reviewed-by: Filipe Manana Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 9f8546498818..af56fdbba65d 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -736,7 +736,7 @@ bool btrfs_check_options(const struct btrfs_fs_info *info, */ void btrfs_set_free_space_cache_settings(struct btrfs_fs_info *fs_info) { - if (fs_info->sectorsize < PAGE_SIZE && btrfs_test_opt(fs_info, SPACE_CACHE)) { + if (fs_info->sectorsize != PAGE_SIZE && btrfs_test_opt(fs_info, SPACE_CACHE)) { btrfs_info(fs_info, "forcing free space tree for sector size %u with page size %lu", fs_info->sectorsize, PAGE_SIZE); From 530e3d4af566ca44807d79359b90794dea24c4f3 Mon Sep 17 00:00:00 2001 From: Suchit Karunakaran Date: Fri, 19 Dec 2025 22:44:34 +0530 Subject: [PATCH 166/283] btrfs: fix NULL pointer dereference in do_abort_log_replay() Coverity reported a NULL pointer dereference issue (CID 1666756) in do_abort_log_replay(). When btrfs_alloc_path() fails in replay_one_buffer(), wc->subvol_path is NULL, but btrfs_abort_log_replay() calls do_abort_log_replay() which unconditionally dereferences wc->subvol_path when attempting to print debug information. Fix this by adding a NULL check before dereferencing wc->subvol_path in do_abort_log_replay(). Fixes: 2753e4917624 ("btrfs: dump detailed info and specific messages on log replay failures") Reviewed-by: Filipe Manana Signed-off-by: Suchit Karunakaran Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/tree-log.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 5831754bb01c..2d9d38b82daa 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -190,7 +190,7 @@ static void do_abort_log_replay(struct walk_control *wc, const char *function, btrfs_abort_transaction(wc->trans, error); - if (wc->subvol_path->nodes[0]) { + if (wc->subvol_path && wc->subvol_path->nodes[0]) { btrfs_crit(fs_info, "subvolume (root %llu) leaf currently being processed:", btrfs_root_id(wc->root)); From 2bb83bc42be6280d9bc363b8fbcd6fdab690d16d Mon Sep 17 00:00:00 2001 From: Mark Harmstone Date: Fri, 19 Dec 2025 18:15:28 +0000 Subject: [PATCH 167/283] btrfs: show correct warning if can't read data reloc tree If a filesystem is missing its data reloc tree, we get something like this in dmesg: BTRFS warning (device loop11): failed to read root (objectid=4): -2 BTRFS error (device loop11): open_ctree failed: -2 objectid is BTRFS_DEV_TREE_OBJECTID, but this should actually be the value of BTRFS_DATA_RELOC_TREE_OBJECTID. btrfs_read_roots() prints location.objectid on failure, but this isn't set when reading the data reloc tree. Set location.objectid to the correct value on failure, so that the error message makes sense. Reviewed-by: Qu Wenruo Signed-off-by: Mark Harmstone Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 89149fac804c..d8ca5b6e88e0 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2255,6 +2255,7 @@ static int btrfs_read_roots(struct btrfs_fs_info *fs_info) BTRFS_DATA_RELOC_TREE_OBJECTID, true); if (IS_ERR(root)) { if (!btrfs_test_opt(fs_info, IGNOREBADROOTS)) { + location.objectid = BTRFS_DATA_RELOC_TREE_OBJECTID; ret = PTR_ERR(root); goto out; } From 9892353726ad222219aa18c329e3a3636134dd56 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Thu, 1 Jan 2026 08:56:07 -0500 Subject: [PATCH 168/283] net/sched: act_mirred: Fix leak when redirecting to self on egress Whenever a mirred redirect to self on egress happens, mirred allocates a new skb (skb_to_send). The loop to self check was done after that allocation, but was not freeing the newly allocated skb, causing a leak. Fix this by moving the if-statement to before the allocation of the new skb. The issue was found by running the accompanying tdc test in 2/2 with config kmemleak enabled. After a few minutes the kmemleak thread ran and reported the leak coming from mirred. Fixes: 1d856251a009 ("net/sched: act_mirred: fix loop detection") Signed-off-by: Jamal Hadi Salim Link: https://patch.msgid.link/20260101135608.253079-2-jhs@mojatatu.com Signed-off-by: Jakub Kicinski --- net/sched/act_mirred.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index 91c96cc625bd..05e0b14b5773 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -266,21 +266,9 @@ static int tcf_mirred_to_dev(struct sk_buff *skb, struct tcf_mirred *m, goto err_cant_do; } - /* we could easily avoid the clone only if called by ingress and clsact; - * since we can't easily detect the clsact caller, skip clone only for - * ingress - that covers the TC S/W datapath. - */ - at_ingress = skb_at_tc_ingress(skb); - dont_clone = skb_at_tc_ingress(skb) && is_redirect && - tcf_mirred_can_reinsert(retval); - if (!dont_clone) { - skb_to_send = skb_clone(skb, GFP_ATOMIC); - if (!skb_to_send) - goto err_cant_do; - } - want_ingress = tcf_mirred_act_wants_ingress(m_eaction); + at_ingress = skb_at_tc_ingress(skb); if (dev == skb->dev && want_ingress == at_ingress) { pr_notice_once("tc mirred: Loop (%s:%s --> %s:%s)\n", netdev_name(skb->dev), @@ -290,6 +278,18 @@ static int tcf_mirred_to_dev(struct sk_buff *skb, struct tcf_mirred *m, goto err_cant_do; } + /* we could easily avoid the clone only if called by ingress and clsact; + * since we can't easily detect the clsact caller, skip clone only for + * ingress - that covers the TC S/W datapath. + */ + dont_clone = skb_at_tc_ingress(skb) && is_redirect && + tcf_mirred_can_reinsert(retval); + if (!dont_clone) { + skb_to_send = skb_clone(skb, GFP_ATOMIC); + if (!skb_to_send) + goto err_cant_do; + } + /* All mirred/redirected skbs should clear previous ct info */ nf_reset_ct(skb_to_send); if (want_ingress && !at_ingress) /* drop dst for egress -> ingress */ From 4bcd49a03b94a5e16717961a7d750d676f044436 Mon Sep 17 00:00:00 2001 From: Victor Nogueira Date: Thu, 1 Jan 2026 08:56:08 -0500 Subject: [PATCH 169/283] selftests/tc-testing: Add test case redirecting to self on egress Add single mirred test case that attempts to redirect to self on egress using clsact Signed-off-by: Victor Nogueira Link: https://patch.msgid.link/20260101135608.253079-3-jhs@mojatatu.com Signed-off-by: Jakub Kicinski --- .../tc-testing/tc-tests/actions/mirred.json | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json index da156feabcbf..b056eb966871 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json @@ -1098,5 +1098,52 @@ "teardown": [ "$TC qdisc del dev $DUMMY root" ] + }, + { + "id": "4ed9", + "name": "Try to redirect to self on egress with clsact", + "category": [ + "filter", + "mirred" + ], + "plugins": { + "requires": [ + "nsPlugin" + ] + }, + "setup": [ + "$IP link set dev $DUMMY up || true", + "$IP addr add 10.10.10.10/24 dev $DUMMY || true", + "$TC qdisc add dev $DUMMY clsact", + "$TC filter add dev $DUMMY egress protocol ip prio 10 matchall action mirred egress redirect dev $DUMMY index 1" + ], + "cmdUnderTest": "ping -c1 -W0.01 -I $DUMMY 10.10.10.1", + "expExitCode": "1", + "verifyCmd": "$TC -j -s actions get action mirred index 1", + "matchJSON": [ + { + "total acts": 0 + }, + { + "actions": [ + { + "order": 1, + "kind": "mirred", + "mirred_action": "redirect", + "direction": "egress", + "index": 1, + "stats": { + "packets": 1, + "overlimits": 1 + }, + "not_in_hw": true + } + ] + } + ], + "teardown": [ + "$TC qdisc del dev $DUMMY clsact" + ] } + ] From 2fa98059fd5a0936d0951bd14f8990ae0aa5272a Mon Sep 17 00:00:00 2001 From: Ankit Khushwaha Date: Thu, 1 Jan 2026 22:58:40 +0530 Subject: [PATCH 170/283] selftests: mptcp: Mark xerror and die_perror __noreturn Compiler reports potential uses of uninitialized variables in mptcp_connect.c when xerror() is called from failure paths. mptcp_connect.c:1262:11: warning: variable 'raw_addr' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] xerror() terminates execution by calling exit(), but it is not visible to the compiler & assumes control flow may continue past the call. Annotate xerror() with __noreturn so the compiler can correctly reason about control flow and avoid false-positive uninitialized variable warnings. Signed-off-by: Ankit Khushwaha Link: https://patch.msgid.link/20260101172840.90186-1-ankitkhushwaha.linux@gmail.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/mptcp/Makefile | 1 + tools/testing/selftests/net/mptcp/mptcp_connect.c | 3 ++- tools/testing/selftests/net/mptcp/mptcp_diag.c | 3 ++- tools/testing/selftests/net/mptcp/mptcp_inq.c | 5 +++-- tools/testing/selftests/net/mptcp/mptcp_sockopt.c | 5 +++-- 5 files changed, 11 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/net/mptcp/Makefile b/tools/testing/selftests/net/mptcp/Makefile index 15d144a25d82..4dd6278cd3dd 100644 --- a/tools/testing/selftests/net/mptcp/Makefile +++ b/tools/testing/selftests/net/mptcp/Makefile @@ -3,6 +3,7 @@ top_srcdir = ../../../../.. CFLAGS += -Wall -Wl,--no-as-needed -O2 -g -I$(top_srcdir)/usr/include $(KHDR_INCLUDES) +CFLAGS += -I$(top_srcdir)/tools/include TEST_PROGS := \ diag.sh \ diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.c b/tools/testing/selftests/net/mptcp/mptcp_connect.c index 404a77bf366a..10f6f99cfd4e 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.c +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.c @@ -33,6 +33,7 @@ #include #include #include +#include extern int optind; @@ -140,7 +141,7 @@ static void die_usage(void) exit(1); } -static void xerror(const char *fmt, ...) +static void __noreturn xerror(const char *fmt, ...) { va_list ap; diff --git a/tools/testing/selftests/net/mptcp/mptcp_diag.c b/tools/testing/selftests/net/mptcp/mptcp_diag.c index e084796e804d..8e0b1b8d84b6 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_diag.c +++ b/tools/testing/selftests/net/mptcp/mptcp_diag.c @@ -5,6 +5,7 @@ #include #include #include +#include #include #include #include @@ -87,7 +88,7 @@ enum { #define rta_getattr(type, value) (*(type *)RTA_DATA(value)) -static void die_perror(const char *msg) +static void __noreturn die_perror(const char *msg) { perror(msg); exit(1); diff --git a/tools/testing/selftests/net/mptcp/mptcp_inq.c b/tools/testing/selftests/net/mptcp/mptcp_inq.c index 8e8f6441ad8b..5716998da192 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_inq.c +++ b/tools/testing/selftests/net/mptcp/mptcp_inq.c @@ -28,6 +28,7 @@ #include #include +#include #ifndef IPPROTO_MPTCP #define IPPROTO_MPTCP 262 @@ -40,7 +41,7 @@ static int pf = AF_INET; static int proto_tx = IPPROTO_MPTCP; static int proto_rx = IPPROTO_MPTCP; -static void die_perror(const char *msg) +static void __noreturn die_perror(const char *msg) { perror(msg); exit(1); @@ -52,7 +53,7 @@ static void die_usage(int r) exit(r); } -static void xerror(const char *fmt, ...) +static void __noreturn xerror(const char *fmt, ...) { va_list ap; diff --git a/tools/testing/selftests/net/mptcp/mptcp_sockopt.c b/tools/testing/selftests/net/mptcp/mptcp_sockopt.c index 286164f7246e..b6e58d936ebe 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_sockopt.c +++ b/tools/testing/selftests/net/mptcp/mptcp_sockopt.c @@ -25,6 +25,7 @@ #include #include +#include static int pf = AF_INET; @@ -127,7 +128,7 @@ struct so_state { #define MIN(a, b) ((a) < (b) ? (a) : (b)) #endif -static void die_perror(const char *msg) +static void __noreturn die_perror(const char *msg) { perror(msg); exit(1); @@ -139,7 +140,7 @@ static void die_usage(int r) exit(r); } -static void xerror(const char *fmt, ...) +static void __noreturn xerror(const char *fmt, ...) { va_list ap; From a7fc8c641cab855824c45e5e8877e40fd528b5df Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Fri, 2 Jan 2026 12:29:38 +0100 Subject: [PATCH 171/283] net: airoha: Fix npu rx DMA definitions Fix typos in npu rx DMA descriptor definitions. Fixes: b3ef7bdec66fb ("net: airoha: Add airoha_offload.h header") Signed-off-by: Lorenzo Bianconi Link: https://patch.msgid.link/20260102-airoha-npu-dma-rx-def-fixes-v1-1-205fc6bf7d94@kernel.org Signed-off-by: Jakub Kicinski --- include/linux/soc/airoha/airoha_offload.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/soc/airoha/airoha_offload.h b/include/linux/soc/airoha/airoha_offload.h index 4d23cbb7d407..ab64ecdf39a0 100644 --- a/include/linux/soc/airoha/airoha_offload.h +++ b/include/linux/soc/airoha/airoha_offload.h @@ -71,12 +71,12 @@ static inline void airoha_ppe_dev_check_skb(struct airoha_ppe_dev *dev, #define NPU_RX1_DESC_NUM 512 /* CTRL */ -#define NPU_RX_DMA_DESC_LAST_MASK BIT(29) -#define NPU_RX_DMA_DESC_LEN_MASK GENMASK(28, 15) -#define NPU_RX_DMA_DESC_CUR_LEN_MASK GENMASK(14, 1) +#define NPU_RX_DMA_DESC_LAST_MASK BIT(27) +#define NPU_RX_DMA_DESC_LEN_MASK GENMASK(26, 14) +#define NPU_RX_DMA_DESC_CUR_LEN_MASK GENMASK(13, 1) #define NPU_RX_DMA_DESC_DONE_MASK BIT(0) /* INFO */ -#define NPU_RX_DMA_PKT_COUNT_MASK GENMASK(31, 28) +#define NPU_RX_DMA_PKT_COUNT_MASK GENMASK(31, 29) #define NPU_RX_DMA_PKT_ID_MASK GENMASK(28, 26) #define NPU_RX_DMA_SRC_PORT_MASK GENMASK(25, 21) #define NPU_RX_DMA_CRSN_MASK GENMASK(20, 16) From 8632180daf735074a746ce2b3808a8f2c079310e Mon Sep 17 00:00:00 2001 From: Guodong Xu Date: Tue, 23 Dec 2025 10:44:27 +0800 Subject: [PATCH 172/283] riscv: cpufeature: Fix Zk bundled extension missing Zknh MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Zk extension is a bundle consisting of Zkn, Zkr, and Zkt. The Zkn extension itself is a bundle consisting of Zbkb, Zbkc, Zbkx, Zknd, Zkne, and Zknh. The current implementation of riscv_zk_bundled_exts manually listed the dependencies but missed RISCV_ISA_EXT_ZKNH. Fix this by introducing a RISCV_ISA_EXT_ZKN macro that lists the Zkn components and using it in both riscv_zk_bundled_exts and riscv_zkn_bundled_exts. This adds the missing Zknh extension to Zk and reduces code duplication. Fixes: 0d8295ed975b ("riscv: add ISA extension parsing for scalar crypto") Link: https://patch.msgid.link/20231114141256.126749-4-cleger@rivosinc.com/ Signed-off-by: Guodong Xu Reviewed-by: Clément Léger Link: https://patch.msgid.link/20251223-zk-missing-zknh-v1-1-b627c990ee1a@riscstar.com Signed-off-by: Paul Walmsley --- arch/riscv/kernel/cpufeature.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c index c05b11596c19..fa591aff9d33 100644 --- a/arch/riscv/kernel/cpufeature.c +++ b/arch/riscv/kernel/cpufeature.c @@ -301,23 +301,22 @@ static const unsigned int riscv_a_exts[] = { RISCV_ISA_EXT_ZALRSC, }; +#define RISCV_ISA_EXT_ZKN \ + RISCV_ISA_EXT_ZBKB, \ + RISCV_ISA_EXT_ZBKC, \ + RISCV_ISA_EXT_ZBKX, \ + RISCV_ISA_EXT_ZKND, \ + RISCV_ISA_EXT_ZKNE, \ + RISCV_ISA_EXT_ZKNH + static const unsigned int riscv_zk_bundled_exts[] = { - RISCV_ISA_EXT_ZBKB, - RISCV_ISA_EXT_ZBKC, - RISCV_ISA_EXT_ZBKX, - RISCV_ISA_EXT_ZKND, - RISCV_ISA_EXT_ZKNE, + RISCV_ISA_EXT_ZKN, RISCV_ISA_EXT_ZKR, - RISCV_ISA_EXT_ZKT, + RISCV_ISA_EXT_ZKT }; static const unsigned int riscv_zkn_bundled_exts[] = { - RISCV_ISA_EXT_ZBKB, - RISCV_ISA_EXT_ZBKC, - RISCV_ISA_EXT_ZBKX, - RISCV_ISA_EXT_ZKND, - RISCV_ISA_EXT_ZKNE, - RISCV_ISA_EXT_ZKNH, + RISCV_ISA_EXT_ZKN }; static const unsigned int riscv_zks_bundled_exts[] = { From 5e5be092ffadcab0093464ccd9e30f0c5cce16b9 Mon Sep 17 00:00:00 2001 From: "Guo Ren (Alibaba DAMO Academy)" Date: Sun, 30 Nov 2025 19:58:50 -0500 Subject: [PATCH 173/283] riscv: pgtable: Cleanup useless VA_USER_XXX definitions These marcos are not used after commit b5b4287accd7 ("riscv: mm: Use hint address in mmap if available"). Cleanup VA_USER_XXX definitions in asm/pgtable.h. Fixes: b5b4287accd7 ("riscv: mm: Use hint address in mmap if available") Signed-off-by: Guo Ren (Alibaba DAMO Academy) Reviewed-by: Jinjie Ruan Link: https://patch.msgid.link/20251201005850.702569-1-guoren@kernel.org Signed-off-by: Paul Walmsley --- arch/riscv/include/asm/pgtable.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h index 6bb1f5bdc5d2..9acd58a67123 100644 --- a/arch/riscv/include/asm/pgtable.h +++ b/arch/riscv/include/asm/pgtable.h @@ -124,10 +124,6 @@ #ifdef CONFIG_64BIT #include -#define VA_USER_SV39 (UL(1) << (VA_BITS_SV39 - 1)) -#define VA_USER_SV48 (UL(1) << (VA_BITS_SV48 - 1)) -#define VA_USER_SV57 (UL(1) << (VA_BITS_SV57 - 1)) - #define MMAP_VA_BITS_64 ((VA_BITS >= VA_BITS_SV48) ? VA_BITS_SV48 : VA_BITS) #define MMAP_MIN_VA_BITS_64 (VA_BITS_SV39) #define MMAP_VA_BITS (is_compat_task() ? VA_BITS_SV32 : MMAP_VA_BITS_64) From 86c22d475cbca80532da33ed5df73e6814d7a632 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Sun, 4 Jan 2026 08:52:32 -0800 Subject: [PATCH 174/283] netlink: specs: netdev: clarify the page pool API a little The phrasing of the page-pool-get doc is very confusing. It's supposed to highlight that support depends on the driver doing its part but it sounds like orphaned page pools won't be visible. The description of the ifindex is completely wrong. We move the page pool to loopback and skip the attribute if ifindex is loopback. Link: https://lore.kernel.org/20260104084347.5de3a537@kernel.org Reviewed-by: Donald Hunter Acked-by: Jesper Dangaard Brouer Link: https://patch.msgid.link/20260104165232.710460-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- Documentation/netlink/specs/netdev.yaml | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/netlink/specs/netdev.yaml b/Documentation/netlink/specs/netdev.yaml index 82bf5cb2617d..596c306ce52b 100644 --- a/Documentation/netlink/specs/netdev.yaml +++ b/Documentation/netlink/specs/netdev.yaml @@ -142,7 +142,7 @@ attribute-sets: name: ifindex doc: | ifindex of the netdev to which the pool belongs. - May be reported as 0 if the page pool was allocated for a netdev + May not be reported if the page pool was allocated for a netdev which got destroyed already (page pools may outlast their netdevs because they wait for all memory to be returned). type: u32 @@ -601,7 +601,9 @@ operations: name: page-pool-get doc: | Get / dump information about Page Pools. - (Only Page Pools associated with a net_device can be listed.) + Only Page Pools associated by the driver with a net_device + can be listed. ifindex will not be reported if the net_device + no longer exists. attribute-set: page-pool do: request: From 938d79ec2b059fea2f3bf0f53107650a64372acf Mon Sep 17 00:00:00 2001 From: Soham Metha Date: Thu, 4 Dec 2025 01:13:52 +0530 Subject: [PATCH 175/283] riscv: kexec_image: Fix dead link to boot-image-header.rst Fix the reference to 'boot-image-header.rst', which was moved to 'Documentation/arch/riscv/' in commit 'ed843ae947f8' ("docs: move riscv under arch"). Signed-off-by: Soham Metha Link: https://patch.msgid.link/20251203194355.63265-1-sohammetha01@gmail.com Signed-off-by: Paul Walmsley --- arch/riscv/kernel/kexec_image.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/kernel/kexec_image.c b/arch/riscv/kernel/kexec_image.c index 8f2eb900910b..51dc89259f16 100644 --- a/arch/riscv/kernel/kexec_image.c +++ b/arch/riscv/kernel/kexec_image.c @@ -22,7 +22,7 @@ static int image_probe(const char *kernel_buf, unsigned long kernel_len) if (!h || kernel_len < sizeof(*h)) return -EINVAL; - /* According to Documentation/riscv/boot-image-header.rst, + /* According to Documentation/arch/riscv/boot-image-header.rst, * use "magic2" field to check when version >= 0.2. */ From 238e03d0466239410b72294b79494e43d4fabe77 Mon Sep 17 00:00:00 2001 From: Mohammad Heib Date: Sun, 4 Jan 2026 23:31:01 +0200 Subject: [PATCH 176/283] net: fix memory leak in skb_segment_list for GRO packets When skb_segment_list() is called during packet forwarding, it handles packets that were aggregated by the GRO engine. Historically, the segmentation logic in skb_segment_list assumes that individual segments are split from a parent SKB and may need to carry their own socket memory accounting. Accordingly, the code transfers truesize from the parent to the newly created segments. Prior to commit ed4cccef64c1 ("gro: fix ownership transfer"), this truesize subtraction in skb_segment_list() was valid because fragments still carry a reference to the original socket. However, commit ed4cccef64c1 ("gro: fix ownership transfer") changed this behavior by ensuring that fraglist entries are explicitly orphaned (skb->sk = NULL) to prevent illegal orphaning later in the stack. This change meant that the entire socket memory charge remained with the head SKB, but the corresponding accounting logic in skb_segment_list() was never updated. As a result, the current code unconditionally adds each fragment's truesize to delta_truesize and subtracts it from the parent SKB. Since the fragments are no longer charged to the socket, this subtraction results in an effective under-count of memory when the head is freed. This causes sk_wmem_alloc to remain non-zero, preventing socket destruction and leading to a persistent memory leak. The leak can be observed via KMEMLEAK when tearing down the networking environment: unreferenced object 0xffff8881e6eb9100 (size 2048): comm "ping", pid 6720, jiffies 4295492526 backtrace: kmem_cache_alloc_noprof+0x5c6/0x800 sk_prot_alloc+0x5b/0x220 sk_alloc+0x35/0xa00 inet6_create.part.0+0x303/0x10d0 __sock_create+0x248/0x640 __sys_socket+0x11b/0x1d0 Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST packets constructed by GRO, the truesize adjustment is removed. The call to skb_release_head_state() must be preserved. As documented in commit cf673ed0e057 ("net: fix fraglist segmentation reference count leak"), it is still required to correctly drop references to SKB extensions that may be overwritten during __copy_skb_header(). Fixes: ed4cccef64c1 ("gro: fix ownership transfer") Signed-off-by: Mohammad Heib Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260104213101.352887-1-mheib@redhat.com Signed-off-by: Jakub Kicinski --- net/core/skbuff.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index a00808f7be6a..a56133902c0d 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -4636,12 +4636,14 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb, { struct sk_buff *list_skb = skb_shinfo(skb)->frag_list; unsigned int tnl_hlen = skb_tnl_header_len(skb); - unsigned int delta_truesize = 0; unsigned int delta_len = 0; struct sk_buff *tail = NULL; struct sk_buff *nskb, *tmp; int len_diff, err; + /* Only skb_gro_receive_list generated skbs arrive here */ + DEBUG_NET_WARN_ON_ONCE(!(skb_shinfo(skb)->gso_type & SKB_GSO_FRAGLIST)); + skb_push(skb, -skb_network_offset(skb) + offset); /* Ensure the head is writeable before touching the shared info */ @@ -4655,8 +4657,9 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb, nskb = list_skb; list_skb = list_skb->next; + DEBUG_NET_WARN_ON_ONCE(nskb->sk); + err = 0; - delta_truesize += nskb->truesize; if (skb_shared(nskb)) { tmp = skb_clone(nskb, GFP_ATOMIC); if (tmp) { @@ -4699,7 +4702,6 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb, goto err_linearize; } - skb->truesize = skb->truesize - delta_truesize; skb->data_len = skb->data_len - delta_len; skb->len = skb->len - delta_len; From fd390ff144513eb0310c350b1cf5fa8d6ddd0c53 Mon Sep 17 00:00:00 2001 From: "Mario Limonciello (AMD)" Date: Mon, 5 Jan 2026 22:46:38 -0600 Subject: [PATCH 177/283] PCI/VGA: Don't assume the only VGA device on a system is `boot_vga` Some systems ship with multiple display class devices but not all of them are VGA devices. If the "only" VGA device on the system is not used for displaying the image on the screen marking it as `boot_vga` because nothing was found is totally wrong. This behavior actually leads to mistakes of the wrong device being advertised to userspace and then userspace can make incorrect decisions. As there is an accurate `boot_display` sysfs file stop lying about `boot_vga` by assuming if nothing is found it's the right device. Reported-by: Aaron Erhardt Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220712 Tested-by: Aaron Erhardt Acked-by: Thomas Zimmermann Fixes: ad90860bd10ee ("fbcon: Use screen info to find primary device") Tested-by: Luke D. Jones Signed-off-by: Mario Limonciello (AMD) Signed-off-by: Thomas Zimmermann Link: https://patch.msgid.link/20260106044638.52906-1-superm1@kernel.org --- drivers/pci/vgaarb.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/pci/vgaarb.c b/drivers/pci/vgaarb.c index 436fa7f4c387..baa242b14099 100644 --- a/drivers/pci/vgaarb.c +++ b/drivers/pci/vgaarb.c @@ -652,13 +652,6 @@ static bool vga_is_boot_device(struct vga_device *vgadev) return true; } - /* - * Vgadev has neither IO nor MEM enabled. If we haven't found any - * other VGA devices, it is the best candidate so far. - */ - if (!boot_vga) - return true; - return false; } From d5bdf88d1f9d1e4808177f03d89de3d0ba6c6e84 Mon Sep 17 00:00:00 2001 From: Chengjun Yao Date: Mon, 15 Dec 2025 16:18:21 +0800 Subject: [PATCH 178/283] drm/fb-helper: Fix vblank timeout during suspend/reset During GPU reset, VBlank interrupts are disabled which causes drm_fb_helper_fb_dirty() to wait for VBlank timeout. This will create call traces like (seen on an RX7900 series dGPU): [ 101.313646] ------------[ cut here ]------------ [ 101.313648] amdgpu 0000:03:00.0: [drm] vblank wait timed out on crtc 0 [ 101.313657] WARNING: CPU: 0 PID: 461 at drivers/gpu/drm/drm_vblank.c:1320 drm_wait_one_vblank+0x176/0x220 [ 101.313663] Modules linked in: amdgpu amdxcp drm_panel_backlight_quirks gpu_sched drm_buddy drm_ttm_helper ttm drm_exec drm_suballoc_helper drm_display_helper cec rc_core i2c_algo_bit nf_conntrack_netlink xt_nat xt_tcpudp veth xt_conntrack xt_MASQUERADE bridge stp llc xfrm_user xfrm_algo xt_set ip_set nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_addrtype nft_compat x_tables nf_tables overlay qrtr sunrpc snd_hda_codec_alc882 snd_hda_codec_realtek_lib snd_hda_codec_generic snd_hda_codec_atihdmi snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hda_core snd_intel_dspcfg snd_intel_sdw_acpi snd_hwdep snd_pcm amd_atl intel_rapl_msr snd_seq_midi intel_rapl_common asus_ec_sensors snd_seq_midi_event snd_rawmidi snd_seq eeepc_wmi snd_seq_device edac_mce_amd asus_wmi polyval_clmulni ghash_clmulni_intel snd_timer platform_profile aesni_intel wmi_bmof sparse_keymap joydev snd rapl input_leds i2c_piix4 soundcore ccp k10temp i2c_smbus gpio_amdpt mac_hid binfmt_misc sch_fq_codel msr parport_pc ppdev lp parport [ 101.313745] efi_pstore nfnetlink dmi_sysfs autofs4 hid_generic usbhid hid r8169 realtek ahci libahci video wmi [ 101.313760] CPU: 0 UID: 0 PID: 461 Comm: kworker/0:2 Not tainted 6.18.0-rc6-174403b3b920 #1 PREEMPT(voluntary) [ 101.313763] Hardware name: ASUS System Product Name/TUF GAMING X670E-PLUS, BIOS 0821 11/15/2022 [ 101.313765] Workqueue: events drm_fb_helper_damage_work [ 101.313769] RIP: 0010:drm_wait_one_vblank+0x176/0x220 [ 101.313772] Code: 7c 24 08 4c 8b 77 50 4d 85 f6 0f 84 a1 00 00 00 e8 2f 11 03 00 44 89 e9 4c 89 f2 48 c7 c7 d0 ad 0d a8 48 89 c6 e8 2a e0 4a ff <0f> 0b e9 f2 fe ff ff 48 85 ff 74 04 4c 8b 67 08 4d 8b 6c 24 50 4d [ 101.313774] RSP: 0018:ffffc99c00d47d68 EFLAGS: 00010246 [ 101.313777] RAX: 0000000000000000 RBX: 000000000200038a RCX: 0000000000000000 [ 101.313778] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 101.313779] RBP: ffffc99c00d47dc0 R08: 0000000000000000 R09: 0000000000000000 [ 101.313781] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8948c4280010 [ 101.313782] R13: 0000000000000000 R14: ffff894883263a50 R15: ffff89488c384830 [ 101.313784] FS: 0000000000000000(0000) GS:ffff895424692000(0000) knlGS:0000000000000000 [ 101.313785] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 101.313787] CR2: 00007773650ee200 CR3: 0000000588e40000 CR4: 0000000000f50ef0 [ 101.313788] PKRU: 55555554 [ 101.313790] Call Trace: [ 101.313791] [ 101.313795] ? __pfx_autoremove_wake_function+0x10/0x10 [ 101.313800] drm_crtc_wait_one_vblank+0x17/0x30 [ 101.313802] drm_client_modeset_wait_for_vblank+0x61/0x80 [ 101.313805] drm_fb_helper_damage_work+0x46/0x1a0 [ 101.313808] process_one_work+0x1a1/0x3f0 [ 101.313812] worker_thread+0x2ba/0x3d0 [ 101.313816] kthread+0x107/0x220 [ 101.313818] ? __pfx_worker_thread+0x10/0x10 [ 101.313821] ? __pfx_kthread+0x10/0x10 [ 101.313823] ret_from_fork+0x202/0x230 [ 101.313826] ? __pfx_kthread+0x10/0x10 [ 101.313828] ret_from_fork_asm+0x1a/0x30 [ 101.313834] [ 101.313835] ---[ end trace 0000000000000000 ]--- Cancel pending damage work synchronously before console_lock() to ensure any in-flight framebuffer damage operations complete before suspension. Also check for FBINFO_STATE_RUNNING in drm_fb_helper_damage_work() to avoid executing damage work if it is rescheduled while the device is suspended. Fixes: d8c4bddcd8bc ("drm/fb-helper: Synchronize dirty worker with vblank") Signed-off-by: Aurabindo Pillai Signed-off-by: Chengjun Yao Signed-off-by: Thomas Zimmermann Reviewed-by: Thomas Zimmermann Link: https://patch.msgid.link/20251215081822.432005-1-Chengjun.Yao@amd.com --- drivers/gpu/drm/drm_fb_helper.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 4a7f72044ab8..4b47aa0dab35 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -366,6 +366,9 @@ static void drm_fb_helper_damage_work(struct work_struct *work) { struct drm_fb_helper *helper = container_of(work, struct drm_fb_helper, damage_work); + if (helper->info->state != FBINFO_STATE_RUNNING) + return; + drm_fb_helper_fb_dirty(helper); } @@ -732,6 +735,13 @@ void drm_fb_helper_set_suspend_unlocked(struct drm_fb_helper *fb_helper, if (fb_helper->info->state != FBINFO_STATE_RUNNING) return; + /* + * Cancel pending damage work. During GPU reset, VBlank + * interrupts are disabled and drm_fb_helper_fb_dirty() + * would wait for VBlank timeout otherwise. + */ + cancel_work_sync(&fb_helper->damage_work); + console_lock(); } else { From dd4d71f587f3908f058b516d3793aaed66cfb692 Mon Sep 17 00:00:00 2001 From: Ben Horgan Date: Mon, 5 Jan 2026 13:58:47 +0000 Subject: [PATCH 179/283] arm64/efi: Don't fail check current_in_efi() if preemptible As EFI runtime services can now be run without disabling preemption remove the check for non preemptible in current_in_efi(). Without this change, firmware errors that were previously recovered from by __efi_runtime_kernel_fixup_exception() will lead to a kernel oops. Fixes: a5baf582f4c0 ("arm64/efi: Call EFI runtime services without disabling preemption") Signed-off-by: Ben Horgan Reviewed-by: Yeoreum Yun Acked-by: Ard Biesheuvel Reviewed-by: Richard Lyu Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/efi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h index aa91165ca140..e8a9783235cb 100644 --- a/arch/arm64/include/asm/efi.h +++ b/arch/arm64/include/asm/efi.h @@ -45,7 +45,7 @@ void arch_efi_call_virt_teardown(void); * switching to the EFI runtime stack. */ #define current_in_efi() \ - (!preemptible() && efi_rt_stack_top != NULL && \ + (efi_rt_stack_top != NULL && \ on_task_stack(current, READ_ONCE(efi_rt_stack_top[-1]), 1)) #define ARCH_EFI_IRQ_FLAGS_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT) From 08e136ebd193eae7d5eff4c66d576c4a2dabdc3f Mon Sep 17 00:00:00 2001 From: Raphael Pinsonneault-Thibeault Date: Wed, 17 Dec 2025 14:00:40 -0500 Subject: [PATCH 180/283] loop: don't change loop device under exclusive opener in loop_set_status loop_set_status() is allowed to change the loop device while there are other openers of the device, even exclusive ones. In this case, it causes a KASAN: slab-out-of-bounds Read in ext4_search_dir(), since when looking for an entry in an inlined directory, e_value_offs is changed underneath the filesystem by loop_set_status(). Fix the problem by forbidding loop_set_status() from modifying the loop device while there are exclusive openers of the device. This is similar to the fix in loop_configure() by commit 33ec3e53e7b1 ("loop: Don't change loop device under exclusive opener") alongside commit ecbe6bc0003b ("block: use bd_prepare_to_claim directly in the loop driver"). Reported-by: syzbot+3ee481e21fd75e14c397@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=3ee481e21fd75e14c397 Tested-by: syzbot+3ee481e21fd75e14c397@syzkaller.appspotmail.com Tested-by: Yongpeng Yang Signed-off-by: Raphael Pinsonneault-Thibeault Reviewed-by: Jan Kara Signed-off-by: Jens Axboe --- drivers/block/loop.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 32a3a5b13802..ca74cc31bf07 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1225,13 +1225,24 @@ static int loop_clr_fd(struct loop_device *lo) } static int -loop_set_status(struct loop_device *lo, const struct loop_info64 *info) +loop_set_status(struct loop_device *lo, blk_mode_t mode, + struct block_device *bdev, const struct loop_info64 *info) { int err; bool partscan = false; bool size_changed = false; unsigned int memflags; + /* + * If we don't hold exclusive handle for the device, upgrade to it + * here to avoid changing device under exclusive owner. + */ + if (!(mode & BLK_OPEN_EXCL)) { + err = bd_prepare_to_claim(bdev, loop_set_status, NULL); + if (err) + goto out_reread_partitions; + } + err = mutex_lock_killable(&lo->lo_mutex); if (err) return err; @@ -1273,6 +1284,9 @@ out_unfreeze: } out_unlock: mutex_unlock(&lo->lo_mutex); + if (!(mode & BLK_OPEN_EXCL)) + bd_abort_claiming(bdev, loop_set_status); +out_reread_partitions: if (partscan) loop_reread_partitions(lo); @@ -1352,7 +1366,9 @@ loop_info64_to_old(const struct loop_info64 *info64, struct loop_info *info) } static int -loop_set_status_old(struct loop_device *lo, const struct loop_info __user *arg) +loop_set_status_old(struct loop_device *lo, blk_mode_t mode, + struct block_device *bdev, + const struct loop_info __user *arg) { struct loop_info info; struct loop_info64 info64; @@ -1360,17 +1376,19 @@ loop_set_status_old(struct loop_device *lo, const struct loop_info __user *arg) if (copy_from_user(&info, arg, sizeof (struct loop_info))) return -EFAULT; loop_info64_from_old(&info, &info64); - return loop_set_status(lo, &info64); + return loop_set_status(lo, mode, bdev, &info64); } static int -loop_set_status64(struct loop_device *lo, const struct loop_info64 __user *arg) +loop_set_status64(struct loop_device *lo, blk_mode_t mode, + struct block_device *bdev, + const struct loop_info64 __user *arg) { struct loop_info64 info64; if (copy_from_user(&info64, arg, sizeof (struct loop_info64))) return -EFAULT; - return loop_set_status(lo, &info64); + return loop_set_status(lo, mode, bdev, &info64); } static int @@ -1549,14 +1567,14 @@ static int lo_ioctl(struct block_device *bdev, blk_mode_t mode, case LOOP_SET_STATUS: err = -EPERM; if ((mode & BLK_OPEN_WRITE) || capable(CAP_SYS_ADMIN)) - err = loop_set_status_old(lo, argp); + err = loop_set_status_old(lo, mode, bdev, argp); break; case LOOP_GET_STATUS: return loop_get_status_old(lo, argp); case LOOP_SET_STATUS64: err = -EPERM; if ((mode & BLK_OPEN_WRITE) || capable(CAP_SYS_ADMIN)) - err = loop_set_status64(lo, argp); + err = loop_set_status64(lo, mode, bdev, argp); break; case LOOP_GET_STATUS64: return loop_get_status64(lo, argp); @@ -1650,8 +1668,9 @@ loop_info64_to_compat(const struct loop_info64 *info64, } static int -loop_set_status_compat(struct loop_device *lo, - const struct compat_loop_info __user *arg) +loop_set_status_compat(struct loop_device *lo, blk_mode_t mode, + struct block_device *bdev, + const struct compat_loop_info __user *arg) { struct loop_info64 info64; int ret; @@ -1659,7 +1678,7 @@ loop_set_status_compat(struct loop_device *lo, ret = loop_info64_from_compat(arg, &info64); if (ret < 0) return ret; - return loop_set_status(lo, &info64); + return loop_set_status(lo, mode, bdev, &info64); } static int @@ -1685,7 +1704,7 @@ static int lo_compat_ioctl(struct block_device *bdev, blk_mode_t mode, switch(cmd) { case LOOP_SET_STATUS: - err = loop_set_status_compat(lo, + err = loop_set_status_compat(lo, mode, bdev, (const struct compat_loop_info __user *)arg); break; case LOOP_GET_STATUS: From 083029bd8b445595222a3cd14076b880781c1765 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Thu, 20 Nov 2025 16:12:14 -0800 Subject: [PATCH 181/283] idpf: keep the netdev when a reset fails During a successful reset the driver would re-allocate vport resources while keeping the netdevs intact. However, in case of an error in the init task, the netdev of the failing vport will be unregistered, effectively removing the network interface: [ 121.211076] idpf 0000:83:00.0: enabling device (0100 -> 0102) [ 121.221976] idpf 0000:83:00.0: Device HW Reset initiated [ 124.161229] idpf 0000:83:00.0 ens801f0: renamed from eth0 [ 124.163364] idpf 0000:83:00.0 ens801f0d1: renamed from eth1 [ 125.934656] idpf 0000:83:00.0 ens801f0d2: renamed from eth2 [ 128.218429] idpf 0000:83:00.0 ens801f0d3: renamed from eth3 ip -br a ens801f0 UP ens801f0d1 UP ens801f0d2 UP ens801f0d3 UP echo 1 > /sys/class/net/ens801f0/device/reset [ 145.885537] idpf 0000:83:00.0: resetting [ 145.990280] idpf 0000:83:00.0: reset done [ 146.284766] idpf 0000:83:00.0: HW reset detected [ 146.296610] idpf 0000:83:00.0: Device HW Reset initiated [ 211.556719] idpf 0000:83:00.0: Transaction timed-out (op:526 cookie:7700 vc_op:526 salt:77 timeout:60000ms) [ 272.996705] idpf 0000:83:00.0: Transaction timed-out (op:502 cookie:7800 vc_op:502 salt:78 timeout:60000ms) ip -br a ens801f0d1 DOWN ens801f0d2 DOWN ens801f0d3 DOWN Re-shuffle the logic in the error path of the init task to make sure the netdevs remain intact. This will allow the driver to attempt recovery via subsequent resets, provided the FW is still functional. The main change is to make sure that idpf_decfg_netdev() is not called should the init task fail during a reset. The error handling is consolidated under unwind_vports, as the removed labels had the same cleanup logic split depending on the point of failure. Fixes: ce1b75d0635c ("idpf: add ptypes and MAC filter support") Signed-off-by: Emil Tantilov Reviewed-by: Aleksandr Loktionov Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_lib.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index 7ce4eb71a433..313803c08847 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -1579,6 +1579,10 @@ void idpf_init_task(struct work_struct *work) goto unwind_vports; } + err = idpf_send_get_rx_ptype_msg(vport); + if (err) + goto unwind_vports; + index = vport->idx; vport_config = adapter->vport_config[index]; @@ -1590,15 +1594,11 @@ void idpf_init_task(struct work_struct *work) err = idpf_check_supported_desc_ids(vport); if (err) { dev_err(&pdev->dev, "failed to get required descriptor ids\n"); - goto cfg_netdev_err; + goto unwind_vports; } if (idpf_cfg_netdev(vport)) - goto cfg_netdev_err; - - err = idpf_send_get_rx_ptype_msg(vport); - if (err) - goto handle_err; + goto unwind_vports; /* Once state is put into DOWN, driver is ready for dev_open */ np = netdev_priv(vport->netdev); @@ -1645,11 +1645,6 @@ void idpf_init_task(struct work_struct *work) return; -handle_err: - idpf_decfg_netdev(vport); -cfg_netdev_err: - idpf_vport_rel(vport); - adapter->vports[index] = NULL; unwind_vports: if (default_vport) { for (index = 0; index < adapter->max_vports; index++) { From 9f92d7d1cb9cccc6c703ca53d4f1d1acca79b598 Mon Sep 17 00:00:00 2001 From: Marko Turk Date: Mon, 5 Jan 2026 22:37:57 +0100 Subject: [PATCH 182/283] rust: pci: fix typos in Bar struct's comments Fix a typo in the doc-comment of the Bar structure: 'inststance -> instance'. Add also 'is' to the comment inside Bar's `new()` function (suggested by Dirk): // `pdev` is valid by the invariants of `Device`. Fixes: bf9651f84b4e ("rust: pci: implement I/O mappable `pci::Bar`") Suggested-by: Dirk Behme Signed-off-by: Marko Turk Reviewed-by: Dirk Behme Link: https://patch.msgid.link/20260105213726.73000-2-mt@markoturk.info Signed-off-by: Danilo Krummrich --- rust/kernel/pci/io.rs | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/rust/kernel/pci/io.rs b/rust/kernel/pci/io.rs index 0d55c3139b6f..82a4f1eba2f5 100644 --- a/rust/kernel/pci/io.rs +++ b/rust/kernel/pci/io.rs @@ -20,7 +20,7 @@ use core::ops::Deref; /// /// # Invariants /// -/// `Bar` always holds an `IoRaw` inststance that holds a valid pointer to the start of the I/O +/// `Bar` always holds an `IoRaw` instance that holds a valid pointer to the start of the I/O /// memory mapped PCI BAR and its size. pub struct Bar { pdev: ARef, @@ -54,7 +54,7 @@ impl Bar { let ioptr: usize = unsafe { bindings::pci_iomap(pdev.as_raw(), num, 0) } as usize; if ioptr == 0 { // SAFETY: - // `pdev` valid by the invariants of `Device`. + // `pdev` is valid by the invariants of `Device`. // `num` is checked for validity by a previous call to `Device::resource_len`. unsafe { bindings::pci_release_region(pdev.as_raw(), num) }; return Err(ENOMEM); From 8510ef5e3cfbd7d59a16845f85cd0194a8689761 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Tue, 6 Jan 2026 09:03:20 +0900 Subject: [PATCH 183/283] rust: device: Remove explicit import of CStrExt Remove the explicit import of CStrExt. When CONFIG_PRINTK is disabled this import causes a build error: error: unused import: `crate::str::CStrExt` --> rust/kernel/device.rs:17:5 | 17 | use crate::str::CStrExt as _; | ^^^^^^^^^^^^^^^^^^^ | = note: `-D unused-imports` implied by `-D warnings` = help: to override `-D warnings` add `#[allow(unused_imports)]` error: aborting due to 1 previous error CStrExt is covered by prelude::* so the explicit import is redundant. Signed-off-by: FUJITA Tomonori Fixes: 3b83f5d5e78a ("rust: replace `CStr` with `core::ffi::CStr`") Link: https://patch.msgid.link/20260106000320.2593800-1-fujita.tomonori@gmail.com Signed-off-by: Danilo Krummrich --- rust/kernel/device.rs | 1 - 1 file changed, 1 deletion(-) diff --git a/rust/kernel/device.rs b/rust/kernel/device.rs index 5c2e1e0369e9..71b200df0f40 100644 --- a/rust/kernel/device.rs +++ b/rust/kernel/device.rs @@ -14,7 +14,6 @@ use core::{any::TypeId, marker::PhantomData, ptr}; #[cfg(CONFIG_PRINTK)] use crate::c_str; -use crate::str::CStrExt as _; pub mod property; From 75ddaa4ddc86d31edb15e50152adf4ddee77a6ba Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Wed, 24 Dec 2025 13:00:24 +0100 Subject: [PATCH 184/283] pidfs: protect PIDFD_GET_* ioctls() via ifdef We originally protected PIDFD_GET__NAMESPACE ioctls() through ifdefs and recent rework made it possible to drop them. There was an oversight though. When the relevant namespace is turned off ns->ops will be NULL so even though opening a file descriptor is perfectly legitimate it would fail during inode eviction when the file was closed. The simple fix would be to check ns->ops for NULL and continue allow to retrieve namespace fds from pidfds but we don't allow retrieving them when the relevant namespace type is turned off. So keep the simplification but add the ifdefs back in. Link: https://lore.kernel.org/20251222214907.GA189632@quark Link: https://patch.msgid.link/20251224-ununterbrochen-gagen-ea949b83f8f2@brauner Fixes: a71e4f103aed ("pidfs: simplify PIDFD_GET__NAMESPACE ioctls") Tested-by: Brendan Jackman Tested-by: Eric Biggers Reported-by: Eric Biggers Signed-off-by: Christian Brauner --- fs/pidfs.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/fs/pidfs.c b/fs/pidfs.c index dba703d4ce4a..1e20e36e0ed5 100644 --- a/fs/pidfs.c +++ b/fs/pidfs.c @@ -517,14 +517,18 @@ static long pidfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) switch (cmd) { /* Namespaces that hang of nsproxy. */ case PIDFD_GET_CGROUP_NAMESPACE: +#ifdef CONFIG_CGROUPS if (!ns_ref_get(nsp->cgroup_ns)) break; ns_common = to_ns_common(nsp->cgroup_ns); +#endif break; case PIDFD_GET_IPC_NAMESPACE: +#ifdef CONFIG_IPC_NS if (!ns_ref_get(nsp->ipc_ns)) break; ns_common = to_ns_common(nsp->ipc_ns); +#endif break; case PIDFD_GET_MNT_NAMESPACE: if (!ns_ref_get(nsp->mnt_ns)) @@ -532,32 +536,43 @@ static long pidfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ns_common = to_ns_common(nsp->mnt_ns); break; case PIDFD_GET_NET_NAMESPACE: +#ifdef CONFIG_NET_NS if (!ns_ref_get(nsp->net_ns)) break; ns_common = to_ns_common(nsp->net_ns); +#endif break; case PIDFD_GET_PID_FOR_CHILDREN_NAMESPACE: +#ifdef CONFIG_PID_NS if (!ns_ref_get(nsp->pid_ns_for_children)) break; ns_common = to_ns_common(nsp->pid_ns_for_children); +#endif break; case PIDFD_GET_TIME_NAMESPACE: +#ifdef CONFIG_TIME_NS if (!ns_ref_get(nsp->time_ns)) break; ns_common = to_ns_common(nsp->time_ns); +#endif break; case PIDFD_GET_TIME_FOR_CHILDREN_NAMESPACE: +#ifdef CONFIG_TIME_NS if (!ns_ref_get(nsp->time_ns_for_children)) break; ns_common = to_ns_common(nsp->time_ns_for_children); +#endif break; case PIDFD_GET_UTS_NAMESPACE: +#ifdef CONFIG_UTS_NS if (!ns_ref_get(nsp->uts_ns)) break; ns_common = to_ns_common(nsp->uts_ns); +#endif break; /* Namespaces that don't hang of nsproxy. */ case PIDFD_GET_USER_NAMESPACE: +#ifdef CONFIG_USER_NS scoped_guard(rcu) { struct user_namespace *user_ns; @@ -566,8 +581,10 @@ static long pidfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) break; ns_common = to_ns_common(user_ns); } +#endif break; case PIDFD_GET_PID_NAMESPACE: +#ifdef CONFIG_PID_NS scoped_guard(rcu) { struct pid_namespace *pid_ns; @@ -576,6 +593,7 @@ static long pidfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) break; ns_common = to_ns_common(pid_ns); } +#endif break; default: return -ENOIOCTLCMD; From 2e281e1155fc476c571c0bd2ffbfe28ab829a5c3 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Thu, 20 Nov 2025 16:12:15 -0800 Subject: [PATCH 185/283] idpf: detach and close netdevs while handling a reset Protect the reset path from callbacks by setting the netdevs to detached state and close any netdevs in UP state until the reset handling has completed. During a reset, the driver will de-allocate resources for the vport, and there is no guarantee that those will recover, which is why the existing vport_ctrl_lock does not provide sufficient protection. idpf_detach_and_close() is called right before reset handling. If the reset handling succeeds, the netdevs state is recovered via call to idpf_attach_and_open(). If the reset handling fails the netdevs remain down. The detach/down calls are protected with RTNL lock to avoid racing with callbacks. On the recovery side the attach can be done without holding the RTNL lock as there are no callbacks expected at that point, due to detach/close always being done first in that flow. The previous logic restoring the netdevs state based on the IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is still being used to restore the state of the netdevs following the reset, but has no use outside of the reset handling flow. idpf_init_hard_reset() is converted to void, since it was used as such and there is no error handling being done based on its return value. Before this change, invoking hard and soft resets simultaneously will cause the driver to lose the vport state: ip -br a UP echo 1 > /sys/class/net/ens801f0/device/reset& \ ethtool -L ens801f0 combined 8 ip -br a DOWN ip link set up ip -br a DOWN Also in case of a failure in the reset path, the netdev is left exposed to external callbacks, while vport resources are not initialized, leading to a crash on subsequent ifup/down: [408471.398966] idpf 0000:83:00.0: HW reset detected [408471.411744] idpf 0000:83:00.0: Device HW Reset initiated [408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2 [408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078 [408508.126112] #PF: supervisor read access in kernel mode [408508.126687] #PF: error_code(0x0000) - not-present page [408508.127256] PGD 2aae2f067 P4D 0 [408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI ... [408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf] ... [408508.139193] Call Trace: [408508.139637] [408508.140077] __dev_close_many+0xbb/0x260 [408508.140533] __dev_change_flags+0x1cf/0x280 [408508.140987] netif_change_flags+0x26/0x70 [408508.141434] dev_change_flags+0x3d/0xb0 [408508.141878] devinet_ioctl+0x460/0x890 [408508.142321] inet_ioctl+0x18e/0x1d0 [408508.142762] ? _copy_to_user+0x22/0x70 [408508.143207] sock_do_ioctl+0x3d/0xe0 [408508.143652] sock_ioctl+0x10e/0x330 [408508.144091] ? find_held_lock+0x2b/0x80 [408508.144537] __x64_sys_ioctl+0x96/0xe0 [408508.144979] do_syscall_64+0x79/0x3d0 [408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e [408508.145860] RIP: 0033:0x7f3e0bb4caff Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Signed-off-by: Emil Tantilov Reviewed-by: Madhu Chittim Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_lib.c | 121 ++++++++++++--------- 1 file changed, 72 insertions(+), 49 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index 313803c08847..a964e0f5891e 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -729,6 +729,65 @@ static int idpf_init_mac_addr(struct idpf_vport *vport, return 0; } +static void idpf_detach_and_close(struct idpf_adapter *adapter) +{ + int max_vports = adapter->max_vports; + + for (int i = 0; i < max_vports; i++) { + struct net_device *netdev = adapter->netdevs[i]; + + /* If the interface is in detached state, that means the + * previous reset was not handled successfully for this + * vport. + */ + if (!netif_device_present(netdev)) + continue; + + /* Hold RTNL to protect racing with callbacks */ + rtnl_lock(); + netif_device_detach(netdev); + if (netif_running(netdev)) { + set_bit(IDPF_VPORT_UP_REQUESTED, + adapter->vport_config[i]->flags); + dev_close(netdev); + } + rtnl_unlock(); + } +} + +static void idpf_attach_and_open(struct idpf_adapter *adapter) +{ + int max_vports = adapter->max_vports; + + for (int i = 0; i < max_vports; i++) { + struct idpf_vport *vport = adapter->vports[i]; + struct idpf_vport_config *vport_config; + struct net_device *netdev; + + /* In case of a critical error in the init task, the vport + * will be freed. Only continue to restore the netdevs + * if the vport is allocated. + */ + if (!vport) + continue; + + /* No need for RTNL on attach as this function is called + * following detach and dev_close(). We do take RTNL for + * dev_open() below as it can race with external callbacks + * following the call to netif_device_attach(). + */ + netdev = adapter->netdevs[i]; + netif_device_attach(netdev); + vport_config = adapter->vport_config[vport->idx]; + if (test_and_clear_bit(IDPF_VPORT_UP_REQUESTED, + vport_config->flags)) { + rtnl_lock(); + dev_open(netdev, NULL); + rtnl_unlock(); + } + } +} + /** * idpf_cfg_netdev - Allocate, configure and register a netdev * @vport: main vport structure @@ -1041,10 +1100,11 @@ static void idpf_vport_dealloc(struct idpf_vport *vport) idpf_idc_deinit_vport_aux_device(vport->vdev_info); idpf_deinit_mac_addr(vport); - idpf_vport_stop(vport, true); - if (!test_bit(IDPF_HR_RESET_IN_PROG, adapter->flags)) + if (!test_bit(IDPF_HR_RESET_IN_PROG, adapter->flags)) { + idpf_vport_stop(vport, true); idpf_decfg_netdev(vport); + } if (test_bit(IDPF_REMOVE_IN_PROG, adapter->flags)) idpf_del_all_mac_filters(vport); @@ -1544,7 +1604,6 @@ void idpf_init_task(struct work_struct *work) struct idpf_vport_config *vport_config; struct idpf_vport_max_q max_q; struct idpf_adapter *adapter; - struct idpf_netdev_priv *np; struct idpf_vport *vport; u16 num_default_vports; struct pci_dev *pdev; @@ -1600,12 +1659,6 @@ void idpf_init_task(struct work_struct *work) if (idpf_cfg_netdev(vport)) goto unwind_vports; - /* Once state is put into DOWN, driver is ready for dev_open */ - np = netdev_priv(vport->netdev); - clear_bit(IDPF_VPORT_UP, np->state); - if (test_and_clear_bit(IDPF_VPORT_UP_REQUESTED, vport_config->flags)) - idpf_vport_open(vport, true); - /* Spawn and return 'idpf_init_task' work queue until all the * default vports are created */ @@ -1781,27 +1834,6 @@ static int idpf_check_reset_complete(struct idpf_hw *hw, return -EBUSY; } -/** - * idpf_set_vport_state - Set the vport state to be after the reset - * @adapter: Driver specific private structure - */ -static void idpf_set_vport_state(struct idpf_adapter *adapter) -{ - u16 i; - - for (i = 0; i < adapter->max_vports; i++) { - struct idpf_netdev_priv *np; - - if (!adapter->netdevs[i]) - continue; - - np = netdev_priv(adapter->netdevs[i]); - if (test_bit(IDPF_VPORT_UP, np->state)) - set_bit(IDPF_VPORT_UP_REQUESTED, - adapter->vport_config[i]->flags); - } -} - /** * idpf_init_hard_reset - Initiate a hardware reset * @adapter: Driver specific private structure @@ -1810,28 +1842,17 @@ static void idpf_set_vport_state(struct idpf_adapter *adapter) * reallocate. Also reinitialize the mailbox. Return 0 on success, * negative on failure. */ -static int idpf_init_hard_reset(struct idpf_adapter *adapter) +static void idpf_init_hard_reset(struct idpf_adapter *adapter) { struct idpf_reg_ops *reg_ops = &adapter->dev_ops.reg_ops; struct device *dev = &adapter->pdev->dev; - struct net_device *netdev; int err; - u16 i; + idpf_detach_and_close(adapter); mutex_lock(&adapter->vport_ctrl_lock); dev_info(dev, "Device HW Reset initiated\n"); - /* Avoid TX hangs on reset */ - for (i = 0; i < adapter->max_vports; i++) { - netdev = adapter->netdevs[i]; - if (!netdev) - continue; - - netif_carrier_off(netdev); - netif_tx_disable(netdev); - } - /* Prepare for reset */ if (test_and_clear_bit(IDPF_HR_DRV_LOAD, adapter->flags)) { reg_ops->trigger_reset(adapter, IDPF_HR_DRV_LOAD); @@ -1840,7 +1861,6 @@ static int idpf_init_hard_reset(struct idpf_adapter *adapter) idpf_idc_issue_reset_event(adapter->cdev_info); - idpf_set_vport_state(adapter); idpf_vc_core_deinit(adapter); if (!is_reset) reg_ops->trigger_reset(adapter, IDPF_HR_FUNC_RESET); @@ -1887,11 +1907,14 @@ static int idpf_init_hard_reset(struct idpf_adapter *adapter) unlock_mutex: mutex_unlock(&adapter->vport_ctrl_lock); - /* Wait until all vports are created to init RDMA CORE AUX */ - if (!err) - err = idpf_idc_init(adapter); - - return err; + /* Attempt to restore netdevs and initialize RDMA CORE AUX device, + * provided vc_core_init succeeded. It is still possible that + * vports are not allocated at this point if the init task failed. + */ + if (!err) { + idpf_attach_and_open(adapter); + idpf_idc_init(adapter); + } } /** From f6242b354605faff263ca45882b148200915a3f6 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Thu, 20 Nov 2025 16:12:16 -0800 Subject: [PATCH 186/283] idpf: fix memory leak in idpf_vport_rel() Free vport->rx_ptype_lkup in idpf_vport_rel() to avoid leaking memory during a reset. Reported by kmemleak: unreferenced object 0xff450acac838a000 (size 4096): comm "kworker/u258:5", pid 7732, jiffies 4296830044 hex dump (first 32 bytes): 00 00 00 00 00 10 00 00 00 10 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 ................ backtrace (crc 3da81902): __kmalloc_cache_noprof+0x469/0x7a0 idpf_send_get_rx_ptype_msg+0x90/0x570 [idpf] idpf_init_task+0x1ec/0x8d0 [idpf] process_one_work+0x226/0x6d0 worker_thread+0x19e/0x340 kthread+0x10f/0x250 ret_from_fork+0x251/0x2b0 ret_from_fork_asm+0x1a/0x30 Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Signed-off-by: Emil Tantilov Reviewed-by: Aleksandr Loktionov Reviewed-by: Madhu Chittim Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_lib.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index a964e0f5891e..04af10cfaa8c 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -1082,6 +1082,8 @@ static void idpf_vport_rel(struct idpf_vport *vport) kfree(adapter->vport_config[idx]->req_qs_chunks); adapter->vport_config[idx]->req_qs_chunks = NULL; } + kfree(vport->rx_ptype_lkup); + vport->rx_ptype_lkup = NULL; kfree(vport); adapter->num_alloc_vports--; } From e111cbc4adf9f9974eed040aeece7e17460f6bff Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Thu, 20 Nov 2025 16:12:17 -0800 Subject: [PATCH 187/283] idpf: fix memory leak in idpf_vc_core_deinit() Make sure to free hw->lan_regs. Reported by kmemleak during reset: unreferenced object 0xff1b913d02a936c0 (size 96): comm "kworker/u258:14", pid 2174, jiffies 4294958305 hex dump (first 32 bytes): 00 00 00 c0 a8 ba 2d ff 00 00 00 00 00 00 00 00 ......-......... 00 00 40 08 00 00 00 00 00 00 25 b3 a8 ba 2d ff ..@.......%...-. backtrace (crc 36063c4f): __kmalloc_noprof+0x48f/0x890 idpf_vc_core_init+0x6ce/0x9b0 [idpf] idpf_vc_event_task+0x1fb/0x350 [idpf] process_one_work+0x226/0x6d0 worker_thread+0x19e/0x340 kthread+0x10f/0x250 ret_from_fork+0x251/0x2b0 ret_from_fork_asm+0x1a/0x30 Fixes: 6aa53e861c1a ("idpf: implement get LAN MMIO memory regions") Signed-off-by: Emil Tantilov Reviewed-by: Aleksandr Loktionov Reviewed-by: Joshua Hay Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_virtchnl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c index 5bbe7d9294c1..01bbd12a642a 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c +++ b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c @@ -3570,6 +3570,7 @@ init_failed: */ void idpf_vc_core_deinit(struct idpf_adapter *adapter) { + struct idpf_hw *hw = &adapter->hw; bool remove_in_prog; if (!test_bit(IDPF_VC_CORE_INIT, adapter->flags)) @@ -3593,6 +3594,9 @@ void idpf_vc_core_deinit(struct idpf_adapter *adapter) idpf_vport_params_buf_rel(adapter); + kfree(hw->lan_regs); + hw->lan_regs = NULL; + kfree(adapter->vports); adapter->vports = NULL; From 4d792219fe6f891b5b557a607ac8a0a14eda6e38 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Thu, 20 Nov 2025 16:12:18 -0800 Subject: [PATCH 188/283] idpf: fix error handling in the init_task on load If the init_task fails during a driver load, we end up without vports and netdevs, effectively failing the entire process. In that state a subsequent reset will result in a crash as the service task attempts to access uninitialized resources. Following trace is from an error in the init_task where the CREATE_VPORT (op 501) is rejected by the FW: [40922.763136] idpf 0000:83:00.0: Device HW Reset initiated [40924.449797] idpf 0000:83:00.0: Transaction failed (op 501) [40958.148190] idpf 0000:83:00.0: HW reset detected [40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8 ... [40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf] [40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf] ... [40958.177932] Call Trace: [40958.178491] [40958.179040] process_one_work+0x226/0x6d0 [40958.179609] worker_thread+0x19e/0x340 [40958.180158] ? __pfx_worker_thread+0x10/0x10 [40958.180702] kthread+0x10f/0x250 [40958.181238] ? __pfx_kthread+0x10/0x10 [40958.181774] ret_from_fork+0x251/0x2b0 [40958.182307] ? __pfx_kthread+0x10/0x10 [40958.182834] ret_from_fork_asm+0x1a/0x30 [40958.183370] Fix the error handling in the init_task to make sure the service and mailbox tasks are disabled if the error happens during load. These are started in idpf_vc_core_init(), which spawns the init_task and has no way of knowing if it failed. If the error happens on reset, following successful driver load, the tasks can still run, as that will allow the netdevs to attempt recovery through another reset. Stop the PTP callbacks either way as those will be restarted by the call to idpf_vc_core_init() during a successful reset. Fixes: 0fe45467a104 ("idpf: add create vport and netdev configuration") Reported-by: Vivek Kumar Signed-off-by: Emil Tantilov Reviewed-by: Madhu Chittim Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_lib.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index 04af10cfaa8c..e2ee8b137421 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -1690,10 +1690,9 @@ void idpf_init_task(struct work_struct *work) set_bit(IDPF_VPORT_REG_NETDEV, vport_config->flags); } - /* As all the required vports are created, clear the reset flag - * unconditionally here in case we were in reset and the link was down. - */ + /* Clear the reset and load bits as all vports are created */ clear_bit(IDPF_HR_RESET_IN_PROG, adapter->flags); + clear_bit(IDPF_HR_DRV_LOAD, adapter->flags); /* Start the statistics task now */ queue_delayed_work(adapter->stats_wq, &adapter->stats_task, msecs_to_jiffies(10 * (pdev->devfn & 0x07))); @@ -1707,6 +1706,15 @@ unwind_vports: idpf_vport_dealloc(adapter->vports[index]); } } + /* Cleanup after vc_core_init, which has no way of knowing the + * init task failed on driver load. + */ + if (test_and_clear_bit(IDPF_HR_DRV_LOAD, adapter->flags)) { + cancel_delayed_work_sync(&adapter->serv_task); + cancel_delayed_work_sync(&adapter->mbx_task); + } + idpf_ptp_release(adapter); + clear_bit(IDPF_HR_RESET_IN_PROG, adapter->flags); } @@ -1856,7 +1864,7 @@ static void idpf_init_hard_reset(struct idpf_adapter *adapter) dev_info(dev, "Device HW Reset initiated\n"); /* Prepare for reset */ - if (test_and_clear_bit(IDPF_HR_DRV_LOAD, adapter->flags)) { + if (test_bit(IDPF_HR_DRV_LOAD, adapter->flags)) { reg_ops->trigger_reset(adapter, IDPF_HR_DRV_LOAD); } else if (test_and_clear_bit(IDPF_HR_FUNC_RESET, adapter->flags)) { bool is_reset = idpf_is_reset_detected(adapter); From f9841bd28b600526ca4f6713b0ca49bf7bb98452 Mon Sep 17 00:00:00 2001 From: Sreedevi Joshi Date: Tue, 30 Sep 2025 16:23:51 -0500 Subject: [PATCH 189/283] idpf: fix memory leak of flow steer list on rmmod The flow steering list maintains entries that are added and removed as ethtool creates and deletes flow steering rules. Module removal with active entries causes memory leak as the list is not properly cleaned up. Prevent this by iterating through the remaining entries in the list and freeing the associated memory during module removal. Add a spinlock (flow_steer_list_lock) to protect the list access from multiple threads. Fixes: ada3e24b84a0 ("idpf: add flow steering support") Reviewed-by: Przemek Kitszel Reviewed-by: Aleksandr Loktionov Signed-off-by: Sreedevi Joshi Reviewed-by: Simon Horman Tested-by: Mina Almasry Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf.h | 2 ++ .../net/ethernet/intel/idpf/idpf_ethtool.c | 15 ++++++++-- drivers/net/ethernet/intel/idpf/idpf_lib.c | 28 ++++++++++++++++++- 3 files changed, 42 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h index 8cfc68cbfa06..a61821333f5d 100644 --- a/drivers/net/ethernet/intel/idpf/idpf.h +++ b/drivers/net/ethernet/intel/idpf/idpf.h @@ -558,6 +558,7 @@ struct idpf_vector_lifo { * @max_q: Maximum possible queues * @req_qs_chunks: Queue chunk data for requested queues * @mac_filter_list_lock: Lock to protect mac filters + * @flow_steer_list_lock: Lock to protect fsteer filters * @flags: See enum idpf_vport_config_flags */ struct idpf_vport_config { @@ -565,6 +566,7 @@ struct idpf_vport_config { struct idpf_vport_max_q max_q; struct virtchnl2_add_queues *req_qs_chunks; spinlock_t mac_filter_list_lock; + spinlock_t flow_steer_list_lock; DECLARE_BITMAP(flags, IDPF_VPORT_CONFIG_FLAGS_NBITS); }; diff --git a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c index 2589e124e41c..00481fec8179 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c +++ b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c @@ -37,6 +37,7 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd, { struct idpf_netdev_priv *np = netdev_priv(netdev); struct idpf_vport_user_config_data *user_config; + struct idpf_vport_config *vport_config; struct idpf_fsteer_fltr *f; struct idpf_vport *vport; unsigned int cnt = 0; @@ -44,7 +45,8 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd, idpf_vport_ctrl_lock(netdev); vport = idpf_netdev_to_vport(netdev); - user_config = &np->adapter->vport_config[np->vport_idx]->user_config; + vport_config = np->adapter->vport_config[np->vport_idx]; + user_config = &vport_config->user_config; switch (cmd->cmd) { case ETHTOOL_GRXCLSRLCNT: @@ -53,15 +55,18 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd, break; case ETHTOOL_GRXCLSRULE: err = -EINVAL; + spin_lock_bh(&vport_config->flow_steer_list_lock); list_for_each_entry(f, &user_config->flow_steer_list, list) if (f->loc == cmd->fs.location) { cmd->fs.ring_cookie = f->q_index; err = 0; break; } + spin_unlock_bh(&vport_config->flow_steer_list_lock); break; case ETHTOOL_GRXCLSRLALL: cmd->data = idpf_fsteer_max_rules(vport); + spin_lock_bh(&vport_config->flow_steer_list_lock); list_for_each_entry(f, &user_config->flow_steer_list, list) { if (cnt == cmd->rule_cnt) { err = -EMSGSIZE; @@ -72,6 +77,7 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd, } if (!err) cmd->rule_cnt = user_config->num_fsteer_fltrs; + spin_unlock_bh(&vport_config->flow_steer_list_lock); break; default: break; @@ -240,6 +246,7 @@ static int idpf_add_flow_steer(struct net_device *netdev, fltr->loc = fsp->location; fltr->q_index = q_index; + spin_lock_bh(&vport_config->flow_steer_list_lock); list_for_each_entry(f, &user_config->flow_steer_list, list) { if (f->loc >= fltr->loc) break; @@ -250,6 +257,7 @@ static int idpf_add_flow_steer(struct net_device *netdev, list_add(&fltr->list, &user_config->flow_steer_list); user_config->num_fsteer_fltrs++; + spin_unlock_bh(&vport_config->flow_steer_list_lock); out: kfree(rule); @@ -302,17 +310,20 @@ static int idpf_del_flow_steer(struct net_device *netdev, goto out; } + spin_lock_bh(&vport_config->flow_steer_list_lock); list_for_each_entry_safe(f, iter, &user_config->flow_steer_list, list) { if (f->loc == fsp->location) { list_del(&f->list); kfree(f); user_config->num_fsteer_fltrs--; - goto out; + goto out_unlock; } } err = -EINVAL; +out_unlock: + spin_unlock_bh(&vport_config->flow_steer_list_lock); out: kfree(rule); return err; diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index e2ee8b137421..d56366e676cf 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -442,6 +442,29 @@ send_dealloc_vecs: return err; } +/** + * idpf_del_all_flow_steer_filters - Delete all flow steer filters in list + * @vport: main vport struct + * + * Takes flow_steer_list_lock spinlock. Deletes all filters + */ +static void idpf_del_all_flow_steer_filters(struct idpf_vport *vport) +{ + struct idpf_vport_config *vport_config; + struct idpf_fsteer_fltr *f, *ftmp; + + vport_config = vport->adapter->vport_config[vport->idx]; + + spin_lock_bh(&vport_config->flow_steer_list_lock); + list_for_each_entry_safe(f, ftmp, &vport_config->user_config.flow_steer_list, + list) { + list_del(&f->list); + kfree(f); + } + vport_config->user_config.num_fsteer_fltrs = 0; + spin_unlock_bh(&vport_config->flow_steer_list_lock); +} + /** * idpf_find_mac_filter - Search filter list for specific mac filter * @vconfig: Vport config structure @@ -1107,8 +1130,10 @@ static void idpf_vport_dealloc(struct idpf_vport *vport) idpf_vport_stop(vport, true); idpf_decfg_netdev(vport); } - if (test_bit(IDPF_REMOVE_IN_PROG, adapter->flags)) + if (test_bit(IDPF_REMOVE_IN_PROG, adapter->flags)) { idpf_del_all_mac_filters(vport); + idpf_del_all_flow_steer_filters(vport); + } if (adapter->netdevs[i]) { struct idpf_netdev_priv *np = netdev_priv(adapter->netdevs[i]); @@ -1648,6 +1673,7 @@ void idpf_init_task(struct work_struct *work) vport_config = adapter->vport_config[index]; spin_lock_init(&vport_config->mac_filter_list_lock); + spin_lock_init(&vport_config->flow_steer_list_lock); INIT_LIST_HEAD(&vport_config->user_config.mac_filter_list); INIT_LIST_HEAD(&vport_config->user_config.flow_steer_list); From 36aae2ea6bd76b8246caa50e34a4f4824f0a3be8 Mon Sep 17 00:00:00 2001 From: Erik Gabriel Carrillo Date: Tue, 30 Sep 2025 16:23:52 -0500 Subject: [PATCH 190/283] idpf: fix issue with ethtool -n command display When ethtool -n is executed on an interface to display the flow steering rules, "rxclass: Unknown flow type" error is generated. The flow steering list maintained in the driver currently stores only the location and q_index but other fields of the ethtool_rx_flow_spec are not stored. This may be enough for the virtchnl command to delete the entry. However, when the ethtool -n command is used to query the flow steering rules, the ethtool_rx_flow_spec returned is not complete causing the error below. Resolve this by storing the flow spec (fsp) when rules are added and returning the complete flow spec when rules are queried. Also, change the return value from EINVAL to ENOENT when flow steering entry is not found during query by location or when deleting an entry. Add logic to detect and reject duplicate filter entries at the same location and change logic to perform upfront validation of all error conditions before adding flow rules through virtchnl. This avoids the need for additional virtchnl delete messages when subsequent operations fail, which was missing in the original upstream code. Example: Before the fix: ethtool -n eth1 2 RX rings available Total 2 rules rxclass: Unknown flow type rxclass: Unknown flow type After the fix: ethtool -n eth1 2 RX rings available Total 2 rules Filter: 0 Rule Type: TCP over IPv4 Src IP addr: 10.0.0.1 mask: 0.0.0.0 Dest IP addr: 0.0.0.0 mask: 255.255.255.255 TOS: 0x0 mask: 0xff Src port: 0 mask: 0xffff Dest port: 0 mask: 0xffff Action: Direct to queue 0 Filter: 1 Rule Type: UDP over IPv4 Src IP addr: 10.0.0.1 mask: 0.0.0.0 Dest IP addr: 0.0.0.0 mask: 255.255.255.255 TOS: 0x0 mask: 0xff Src port: 0 mask: 0xffff Dest port: 0 mask: 0xffff Action: Direct to queue 0 Fixes: ada3e24b84a0 ("idpf: add flow steering support") Signed-off-by: Erik Gabriel Carrillo Co-developed-by: Sreedevi Joshi Signed-off-by: Sreedevi Joshi Reviewed-by: Przemek Kitszel Reviewed-by: Aleksandr Loktionov Reviewed-by: Simon Horman Tested-by: Mina Almasry Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf.h | 3 +- .../net/ethernet/intel/idpf/idpf_ethtool.c | 59 ++++++++++++------- 2 files changed, 40 insertions(+), 22 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h index a61821333f5d..dab36c0c3cdc 100644 --- a/drivers/net/ethernet/intel/idpf/idpf.h +++ b/drivers/net/ethernet/intel/idpf/idpf.h @@ -284,8 +284,7 @@ struct idpf_port_stats { struct idpf_fsteer_fltr { struct list_head list; - u32 loc; - u32 q_index; + struct ethtool_rx_flow_spec fs; }; /** diff --git a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c index 00481fec8179..7000f6283a33 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c +++ b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c @@ -54,11 +54,15 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd, cmd->data = idpf_fsteer_max_rules(vport); break; case ETHTOOL_GRXCLSRULE: - err = -EINVAL; + err = -ENOENT; spin_lock_bh(&vport_config->flow_steer_list_lock); list_for_each_entry(f, &user_config->flow_steer_list, list) - if (f->loc == cmd->fs.location) { - cmd->fs.ring_cookie = f->q_index; + if (f->fs.location == cmd->fs.location) { + /* Avoid infoleak from padding: zero first, + * then assign fields + */ + memset(&cmd->fs, 0, sizeof(cmd->fs)); + cmd->fs = f->fs; err = 0; break; } @@ -72,7 +76,7 @@ static int idpf_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *cmd, err = -EMSGSIZE; break; } - rule_locs[cnt] = f->loc; + rule_locs[cnt] = f->fs.location; cnt++; } if (!err) @@ -174,7 +178,7 @@ static int idpf_add_flow_steer(struct net_device *netdev, struct idpf_vport *vport; u32 flow_type, q_index; u16 num_rxq; - int err; + int err = 0; vport = idpf_netdev_to_vport(netdev); vport_config = vport->adapter->vport_config[np->vport_idx]; @@ -200,6 +204,29 @@ static int idpf_add_flow_steer(struct net_device *netdev, if (!rule) return -ENOMEM; + fltr = kzalloc(sizeof(*fltr), GFP_KERNEL); + if (!fltr) { + err = -ENOMEM; + goto out_free_rule; + } + + /* detect duplicate entry and reject before adding rules */ + spin_lock_bh(&vport_config->flow_steer_list_lock); + list_for_each_entry(f, &user_config->flow_steer_list, list) { + if (f->fs.location == fsp->location) { + err = -EEXIST; + break; + } + + if (f->fs.location > fsp->location) + break; + parent = f; + } + spin_unlock_bh(&vport_config->flow_steer_list_lock); + + if (err) + goto out; + rule->vport_id = cpu_to_le32(vport->vport_id); rule->count = cpu_to_le32(1); info = &rule->rule_info[0]; @@ -238,28 +265,20 @@ static int idpf_add_flow_steer(struct net_device *netdev, goto out; } - fltr = kzalloc(sizeof(*fltr), GFP_KERNEL); - if (!fltr) { - err = -ENOMEM; - goto out; - } + /* Save a copy of the user's flow spec so ethtool can later retrieve it */ + fltr->fs = *fsp; - fltr->loc = fsp->location; - fltr->q_index = q_index; spin_lock_bh(&vport_config->flow_steer_list_lock); - list_for_each_entry(f, &user_config->flow_steer_list, list) { - if (f->loc >= fltr->loc) - break; - parent = f; - } - parent ? list_add(&fltr->list, &parent->list) : list_add(&fltr->list, &user_config->flow_steer_list); user_config->num_fsteer_fltrs++; spin_unlock_bh(&vport_config->flow_steer_list_lock); + goto out_free_rule; out: + kfree(fltr); +out_free_rule: kfree(rule); return err; } @@ -313,14 +332,14 @@ static int idpf_del_flow_steer(struct net_device *netdev, spin_lock_bh(&vport_config->flow_steer_list_lock); list_for_each_entry_safe(f, iter, &user_config->flow_steer_list, list) { - if (f->loc == fsp->location) { + if (f->fs.location == fsp->location) { list_del(&f->list); kfree(f); user_config->num_fsteer_fltrs--; goto out_unlock; } } - err = -EINVAL; + err = -ENOENT; out_unlock: spin_unlock_bh(&vport_config->flow_steer_list_lock); From 83f38f210b85676f40ba8586b5a8edae19b56995 Mon Sep 17 00:00:00 2001 From: Sreedevi Joshi Date: Mon, 24 Nov 2025 12:47:48 -0600 Subject: [PATCH 191/283] idpf: Fix RSS LUT NULL pointer crash on early ethtool operations The RSS LUT is not initialized until the interface comes up, causing the following NULL pointer crash when ethtool operations like rxhash on/off are performed before the interface is brought up for the first time. Move RSS LUT initialization from ndo_open to vport creation to ensure LUT is always available. This enables RSS configuration via ethtool before bringing the interface up. Simplify LUT management by maintaining all changes in the driver's soft copy and programming zeros to the indirection table when rxhash is disabled. Defer HW programming until the interface comes up if it is down during rxhash and LUT configuration changes. Steps to reproduce: ** Load idpf driver; interfaces will be created modprobe idpf ** Before bringing the interfaces up, turn rxhash off ethtool -K eth2 rxhash off [89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000 [89408.371908] #PF: supervisor read access in kernel mode [89408.371924] #PF: error_code(0x0000) - not-present page [89408.371940] PGD 0 P4D 0 [89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI [89408.372052] RIP: 0010:memcpy_orig+0x16/0x130 [89408.372310] Call Trace: [89408.372317] [89408.372326] ? idpf_set_features+0xfc/0x180 [idpf] [89408.372363] __netdev_update_features+0x295/0xde0 [89408.372384] ethnl_set_features+0x15e/0x460 [89408.372406] genl_family_rcv_msg_doit+0x11f/0x180 [89408.372429] genl_rcv_msg+0x1ad/0x2b0 [89408.372446] ? __pfx_ethnl_set_features+0x10/0x10 [89408.372465] ? __pfx_genl_rcv_msg+0x10/0x10 [89408.372482] netlink_rcv_skb+0x58/0x100 [89408.372502] genl_rcv+0x2c/0x50 [89408.372516] netlink_unicast+0x289/0x3e0 [89408.372533] netlink_sendmsg+0x215/0x440 [89408.372551] __sys_sendto+0x234/0x240 [89408.372571] __x64_sys_sendto+0x28/0x30 [89408.372585] x64_sys_call+0x1909/0x1da0 [89408.372604] do_syscall_64+0x7a/0xfa0 [89408.373140] ? clear_bhb_loop+0x60/0xb0 [89408.373647] entry_SYSCALL_64_after_hwframe+0x76/0x7e [89408.378887] Fixes: a251eee62133 ("idpf: add SRIOV support and other ndo_ops") Signed-off-by: Sreedevi Joshi Reviewed-by: Sridhar Samudrala Reviewed-by: Emil Tantilov Reviewed-by: Aleksandr Loktionov Reviewed-by: Paul Menzel Reviewed-by: Simon Horman Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf.h | 2 - drivers/net/ethernet/intel/idpf/idpf_lib.c | 94 +++++++++---------- drivers/net/ethernet/intel/idpf/idpf_txrx.c | 36 +++---- drivers/net/ethernet/intel/idpf/idpf_txrx.h | 4 +- .../net/ethernet/intel/idpf/idpf_virtchnl.c | 9 +- 5 files changed, 66 insertions(+), 79 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf.h b/drivers/net/ethernet/intel/idpf/idpf.h index dab36c0c3cdc..1bf7934d4e28 100644 --- a/drivers/net/ethernet/intel/idpf/idpf.h +++ b/drivers/net/ethernet/intel/idpf/idpf.h @@ -423,14 +423,12 @@ enum idpf_user_flags { * @rss_key: RSS hash key * @rss_lut_size: Size of RSS lookup table * @rss_lut: RSS lookup table - * @cached_lut: Used to restore previously init RSS lut */ struct idpf_rss_data { u16 rss_key_size; u8 *rss_key; u16 rss_lut_size; u32 *rss_lut; - u32 *cached_lut; }; /** diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index d56366e676cf..51716e5a84ef 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -1073,7 +1073,7 @@ static void idpf_vport_rel(struct idpf_vport *vport) u16 idx = vport->idx; vport_config = adapter->vport_config[vport->idx]; - idpf_deinit_rss(vport); + idpf_deinit_rss_lut(vport); rss_data = &vport_config->user_config.rss_data; kfree(rss_data->rss_key); rss_data->rss_key = NULL; @@ -1226,6 +1226,7 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter, u16 idx = adapter->next_vport; struct idpf_vport *vport; u16 num_max_q; + int err; if (idx == IDPF_NO_FREE_SLOT) return NULL; @@ -1276,10 +1277,11 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter, idpf_vport_init(vport, max_q); - /* This alloc is done separate from the LUT because it's not strictly - * dependent on how many queues we have. If we change number of queues - * and soft reset we'll need a new LUT but the key can remain the same - * for as long as the vport exists. + /* LUT and key are both initialized here. Key is not strictly dependent + * on how many queues we have. If we change number of queues and soft + * reset is initiated, LUT will be freed and a new LUT will be allocated + * as per the updated number of queues during vport bringup. However, + * the key remains the same for as long as the vport exists. */ rss_data = &adapter->vport_config[idx]->user_config.rss_data; rss_data->rss_key = kzalloc(rss_data->rss_key_size, GFP_KERNEL); @@ -1289,6 +1291,11 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter, /* Initialize default rss key */ netdev_rss_key_fill((void *)rss_data->rss_key, rss_data->rss_key_size); + /* Initialize default rss LUT */ + err = idpf_init_rss_lut(vport); + if (err) + goto free_rss_key; + /* fill vport slot in the adapter struct */ adapter->vports[idx] = vport; adapter->vport_ids[idx] = idpf_get_vport_id(vport); @@ -1299,6 +1306,8 @@ static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter, return vport; +free_rss_key: + kfree(rss_data->rss_key); free_vector_idxs: kfree(vport->q_vector_idxs); free_vport: @@ -1476,6 +1485,7 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl) struct idpf_netdev_priv *np = netdev_priv(vport->netdev); struct idpf_adapter *adapter = vport->adapter; struct idpf_vport_config *vport_config; + struct idpf_rss_data *rss_data; int err; if (test_bit(IDPF_VPORT_UP, np->state)) @@ -1570,12 +1580,21 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl) idpf_restore_features(vport); vport_config = adapter->vport_config[vport->idx]; - if (vport_config->user_config.rss_data.rss_lut) - err = idpf_config_rss(vport); - else - err = idpf_init_rss(vport); + rss_data = &vport_config->user_config.rss_data; + + if (!rss_data->rss_lut) { + err = idpf_init_rss_lut(vport); + if (err) { + dev_err(&adapter->pdev->dev, + "Failed to initialize RSS LUT for vport %u: %d\n", + vport->vport_id, err); + goto disable_vport; + } + } + + err = idpf_config_rss(vport); if (err) { - dev_err(&adapter->pdev->dev, "Failed to initialize RSS for vport %u: %d\n", + dev_err(&adapter->pdev->dev, "Failed to configure RSS for vport %u: %d\n", vport->vport_id, err); goto disable_vport; } @@ -1584,7 +1603,7 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl) if (err) { dev_err(&adapter->pdev->dev, "Failed to complete interface up for vport %u: %d\n", vport->vport_id, err); - goto deinit_rss; + goto disable_vport; } if (rtnl) @@ -1592,8 +1611,6 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl) return 0; -deinit_rss: - idpf_deinit_rss(vport); disable_vport: idpf_send_disable_vport_msg(vport); disable_queues: @@ -2051,7 +2068,7 @@ int idpf_initiate_soft_reset(struct idpf_vport *vport, idpf_vport_stop(vport, false); } - idpf_deinit_rss(vport); + idpf_deinit_rss_lut(vport); /* We're passing in vport here because we need its wait_queue * to send a message and it should be getting all the vport * config data out of the adapter but we need to be careful not @@ -2219,40 +2236,6 @@ static void idpf_set_rx_mode(struct net_device *netdev) dev_err(dev, "Failed to set promiscuous mode: %d\n", err); } -/** - * idpf_vport_manage_rss_lut - disable/enable RSS - * @vport: the vport being changed - * - * In the event of disable request for RSS, this function will zero out RSS - * LUT, while in the event of enable request for RSS, it will reconfigure RSS - * LUT with the default LUT configuration. - */ -static int idpf_vport_manage_rss_lut(struct idpf_vport *vport) -{ - bool ena = idpf_is_feature_ena(vport, NETIF_F_RXHASH); - struct idpf_rss_data *rss_data; - u16 idx = vport->idx; - int lut_size; - - rss_data = &vport->adapter->vport_config[idx]->user_config.rss_data; - lut_size = rss_data->rss_lut_size * sizeof(u32); - - if (ena) { - /* This will contain the default or user configured LUT */ - memcpy(rss_data->rss_lut, rss_data->cached_lut, lut_size); - } else { - /* Save a copy of the current LUT to be restored later if - * requested. - */ - memcpy(rss_data->cached_lut, rss_data->rss_lut, lut_size); - - /* Zero out the current LUT to disable */ - memset(rss_data->rss_lut, 0, lut_size); - } - - return idpf_config_rss(vport); -} - /** * idpf_set_features - set the netdev feature flags * @netdev: ptr to the netdev being adjusted @@ -2278,10 +2261,19 @@ static int idpf_set_features(struct net_device *netdev, } if (changed & NETIF_F_RXHASH) { + struct idpf_netdev_priv *np = netdev_priv(netdev); + netdev->features ^= NETIF_F_RXHASH; - err = idpf_vport_manage_rss_lut(vport); - if (err) - goto unlock_mutex; + + /* If the interface is not up when changing the rxhash, update + * to the HW is skipped. The updated LUT will be committed to + * the HW when the interface is brought up. + */ + if (test_bit(IDPF_VPORT_UP, np->state)) { + err = idpf_config_rss(vport); + if (err) + goto unlock_mutex; + } } if (changed & NETIF_F_GRO_HW) { diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c index 1d91c56f7469..8991a891a440 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c @@ -4650,57 +4650,47 @@ static void idpf_fill_dflt_rss_lut(struct idpf_vport *vport) rss_data = &adapter->vport_config[vport->idx]->user_config.rss_data; - for (i = 0; i < rss_data->rss_lut_size; i++) { + for (i = 0; i < rss_data->rss_lut_size; i++) rss_data->rss_lut[i] = i % num_active_rxq; - rss_data->cached_lut[i] = rss_data->rss_lut[i]; - } } /** - * idpf_init_rss - Allocate and initialize RSS resources + * idpf_init_rss_lut - Allocate and initialize RSS LUT * @vport: virtual port * - * Return 0 on success, negative on failure + * Return: 0 on success, negative on failure */ -int idpf_init_rss(struct idpf_vport *vport) +int idpf_init_rss_lut(struct idpf_vport *vport) { struct idpf_adapter *adapter = vport->adapter; struct idpf_rss_data *rss_data; - u32 lut_size; rss_data = &adapter->vport_config[vport->idx]->user_config.rss_data; + if (!rss_data->rss_lut) { + u32 lut_size; - lut_size = rss_data->rss_lut_size * sizeof(u32); - rss_data->rss_lut = kzalloc(lut_size, GFP_KERNEL); - if (!rss_data->rss_lut) - return -ENOMEM; - - rss_data->cached_lut = kzalloc(lut_size, GFP_KERNEL); - if (!rss_data->cached_lut) { - kfree(rss_data->rss_lut); - rss_data->rss_lut = NULL; - - return -ENOMEM; + lut_size = rss_data->rss_lut_size * sizeof(u32); + rss_data->rss_lut = kzalloc(lut_size, GFP_KERNEL); + if (!rss_data->rss_lut) + return -ENOMEM; } /* Fill the default RSS lut values */ idpf_fill_dflt_rss_lut(vport); - return idpf_config_rss(vport); + return 0; } /** - * idpf_deinit_rss - Release RSS resources + * idpf_deinit_rss_lut - Release RSS LUT * @vport: virtual port */ -void idpf_deinit_rss(struct idpf_vport *vport) +void idpf_deinit_rss_lut(struct idpf_vport *vport) { struct idpf_adapter *adapter = vport->adapter; struct idpf_rss_data *rss_data; rss_data = &adapter->vport_config[vport->idx]->user_config.rss_data; - kfree(rss_data->cached_lut); - rss_data->cached_lut = NULL; kfree(rss_data->rss_lut); rss_data->rss_lut = NULL; } diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.h b/drivers/net/ethernet/intel/idpf/idpf_txrx.h index 75b977094741..7d20593bd877 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.h +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.h @@ -1086,8 +1086,8 @@ void idpf_vport_intr_deinit(struct idpf_vport *vport); int idpf_vport_intr_init(struct idpf_vport *vport); void idpf_vport_intr_ena(struct idpf_vport *vport); int idpf_config_rss(struct idpf_vport *vport); -int idpf_init_rss(struct idpf_vport *vport); -void idpf_deinit_rss(struct idpf_vport *vport); +int idpf_init_rss_lut(struct idpf_vport *vport); +void idpf_deinit_rss_lut(struct idpf_vport *vport); int idpf_rx_bufs_init_all(struct idpf_vport *vport); struct idpf_q_vector *idpf_find_rxq_vec(const struct idpf_vport *vport, diff --git a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c index 01bbd12a642a..cb702eac86c8 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c +++ b/drivers/net/ethernet/intel/idpf/idpf_virtchnl.c @@ -2804,6 +2804,10 @@ int idpf_send_get_stats_msg(struct idpf_vport *vport) * @vport: virtual port data structure * @get: flag to set or get rss look up table * + * When rxhash is disabled, RSS LUT will be configured with zeros. If rxhash + * is enabled, the LUT values stored in driver's soft copy will be used to setup + * the HW. + * * Returns 0 on success, negative on failure. */ int idpf_send_get_set_rss_lut_msg(struct idpf_vport *vport, bool get) @@ -2814,10 +2818,12 @@ int idpf_send_get_set_rss_lut_msg(struct idpf_vport *vport, bool get) struct idpf_rss_data *rss_data; int buf_size, lut_buf_size; ssize_t reply_sz; + bool rxhash_ena; int i; rss_data = &vport->adapter->vport_config[vport->idx]->user_config.rss_data; + rxhash_ena = idpf_is_feature_ena(vport, NETIF_F_RXHASH); buf_size = struct_size(rl, lut, rss_data->rss_lut_size); rl = kzalloc(buf_size, GFP_KERNEL); if (!rl) @@ -2839,7 +2845,8 @@ int idpf_send_get_set_rss_lut_msg(struct idpf_vport *vport, bool get) } else { rl->lut_entries = cpu_to_le16(rss_data->rss_lut_size); for (i = 0; i < rss_data->rss_lut_size; i++) - rl->lut[i] = cpu_to_le32(rss_data->rss_lut[i]); + rl->lut[i] = rxhash_ena ? + cpu_to_le32(rss_data->rss_lut[i]) : 0; xn_params.vc_op = VIRTCHNL2_OP_SET_RSS_LUT; } From 445b49d13787da2fe8d51891ee196e5077feef44 Mon Sep 17 00:00:00 2001 From: Sreedevi Joshi Date: Mon, 24 Nov 2025 12:47:49 -0600 Subject: [PATCH 192/283] idpf: Fix RSS LUT configuration on down interfaces RSS LUT provisioning and queries on a down interface currently return silently without effect. Users should be able to configure RSS settings even when the interface is down. Fix by maintaining RSS configuration changes in the driver's soft copy and deferring HW programming until the interface comes up. Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Signed-off-by: Sreedevi Joshi Reviewed-by: Aleksandr Loktionov Reviewed-by: Sridhar Samudrala Reviewed-by: Emil Tantilov Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_ethtool.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c index 7000f6283a33..2efa3c08aba5 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_ethtool.c +++ b/drivers/net/ethernet/intel/idpf/idpf_ethtool.c @@ -411,7 +411,10 @@ static u32 idpf_get_rxfh_indir_size(struct net_device *netdev) * @netdev: network interface device structure * @rxfh: pointer to param struct (indir, key, hfunc) * - * Reads the indirection table directly from the hardware. Always returns 0. + * RSS LUT and Key information are read from driver's cached + * copy. When rxhash is off, rss lut will be displayed as zeros. + * + * Return: 0 on success, -errno otherwise. */ static int idpf_get_rxfh(struct net_device *netdev, struct ethtool_rxfh_param *rxfh) @@ -419,10 +422,13 @@ static int idpf_get_rxfh(struct net_device *netdev, struct idpf_netdev_priv *np = netdev_priv(netdev); struct idpf_rss_data *rss_data; struct idpf_adapter *adapter; + struct idpf_vport *vport; + bool rxhash_ena; int err = 0; u16 i; idpf_vport_ctrl_lock(netdev); + vport = idpf_netdev_to_vport(netdev); adapter = np->adapter; @@ -432,9 +438,8 @@ static int idpf_get_rxfh(struct net_device *netdev, } rss_data = &adapter->vport_config[np->vport_idx]->user_config.rss_data; - if (!test_bit(IDPF_VPORT_UP, np->state)) - goto unlock_mutex; + rxhash_ena = idpf_is_feature_ena(vport, NETIF_F_RXHASH); rxfh->hfunc = ETH_RSS_HASH_TOP; if (rxfh->key) @@ -442,7 +447,7 @@ static int idpf_get_rxfh(struct net_device *netdev, if (rxfh->indir) { for (i = 0; i < rss_data->rss_lut_size; i++) - rxfh->indir[i] = rss_data->rss_lut[i]; + rxfh->indir[i] = rxhash_ena ? rss_data->rss_lut[i] : 0; } unlock_mutex: @@ -482,8 +487,6 @@ static int idpf_set_rxfh(struct net_device *netdev, } rss_data = &adapter->vport_config[vport->idx]->user_config.rss_data; - if (!test_bit(IDPF_VPORT_UP, np->state)) - goto unlock_mutex; if (rxfh->hfunc != ETH_RSS_HASH_NO_CHANGE && rxfh->hfunc != ETH_RSS_HASH_TOP) { @@ -499,7 +502,8 @@ static int idpf_set_rxfh(struct net_device *netdev, rss_data->rss_lut[lut] = rxfh->indir[lut]; } - err = idpf_config_rss(vport); + if (test_bit(IDPF_VPORT_UP, np->state)) + err = idpf_config_rss(vport); unlock_mutex: idpf_vport_ctrl_unlock(netdev); From ebecca5b093895da801b3eba1a55b4ec4027d196 Mon Sep 17 00:00:00 2001 From: Sreedevi Joshi Date: Mon, 24 Nov 2025 12:47:50 -0600 Subject: [PATCH 193/283] idpf: Fix RSS LUT NULL ptr issue after soft reset During soft reset, the RSS LUT is freed and not restored unless the interface is up. If an ethtool command that accesses the rss lut is attempted immediately after reset, it will result in NULL ptr dereference. Also, there is no need to reset the rss lut if the soft reset does not involve queue count change. After soft reset, set the RSS LUT to default values based on the updated queue count only if the reset was a result of a queue count change and the LUT was not configured by the user. In all other cases, don't touch the LUT. Steps to reproduce: ** Bring the interface down (if up) ifconfig eth1 down ** update the queue count (eg., 27->20) ethtool -L eth1 combined 20 ** display the RSS LUT ethtool -x eth1 [82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000 [82375.558373] #PF: supervisor read access in kernel mode [82375.558391] #PF: error_code(0x0000) - not-present page [82375.558408] PGD 0 P4D 0 [82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI [82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf] [82375.558786] Call Trace: [82375.558793] [82375.558804] rss_prepare.isra.0+0x187/0x2a0 [82375.558827] rss_prepare_data+0x3a/0x50 [82375.558845] ethnl_default_doit+0x13d/0x3e0 [82375.558863] genl_family_rcv_msg_doit+0x11f/0x180 [82375.558886] genl_rcv_msg+0x1ad/0x2b0 [82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10 [82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10 [82375.558937] netlink_rcv_skb+0x58/0x100 [82375.558957] genl_rcv+0x2c/0x50 [82375.558971] netlink_unicast+0x289/0x3e0 [82375.558988] netlink_sendmsg+0x215/0x440 [82375.559005] __sys_sendto+0x234/0x240 [82375.559555] __x64_sys_sendto+0x28/0x30 [82375.560068] x64_sys_call+0x1909/0x1da0 [82375.560576] do_syscall_64+0x7a/0xfa0 [82375.561076] ? clear_bhb_loop+0x60/0xb0 [82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 02cbfba1add5 ("idpf: add ethtool callbacks") Signed-off-by: Sreedevi Joshi Reviewed-by: Aleksandr Loktionov Reviewed-by: Sridhar Samudrala Reviewed-by: Emil Tantilov Reviewed-by: Simon Horman Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_lib.c | 20 ++++---------------- drivers/net/ethernet/intel/idpf/idpf_txrx.c | 2 +- drivers/net/ethernet/intel/idpf/idpf_txrx.h | 1 + 3 files changed, 6 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index 51716e5a84ef..003bab3ce5ae 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -1484,8 +1484,6 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl) { struct idpf_netdev_priv *np = netdev_priv(vport->netdev); struct idpf_adapter *adapter = vport->adapter; - struct idpf_vport_config *vport_config; - struct idpf_rss_data *rss_data; int err; if (test_bit(IDPF_VPORT_UP, np->state)) @@ -1579,19 +1577,6 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl) idpf_restore_features(vport); - vport_config = adapter->vport_config[vport->idx]; - rss_data = &vport_config->user_config.rss_data; - - if (!rss_data->rss_lut) { - err = idpf_init_rss_lut(vport); - if (err) { - dev_err(&adapter->pdev->dev, - "Failed to initialize RSS LUT for vport %u: %d\n", - vport->vport_id, err); - goto disable_vport; - } - } - err = idpf_config_rss(vport); if (err) { dev_err(&adapter->pdev->dev, "Failed to configure RSS for vport %u: %d\n", @@ -2068,7 +2053,6 @@ int idpf_initiate_soft_reset(struct idpf_vport *vport, idpf_vport_stop(vport, false); } - idpf_deinit_rss_lut(vport); /* We're passing in vport here because we need its wait_queue * to send a message and it should be getting all the vport * config data out of the adapter but we need to be careful not @@ -2094,6 +2078,10 @@ int idpf_initiate_soft_reset(struct idpf_vport *vport, if (err) goto err_open; + if (reset_cause == IDPF_SR_Q_CHANGE && + !netif_is_rxfh_configured(vport->netdev)) + idpf_fill_dflt_rss_lut(vport); + if (vport_is_up) err = idpf_vport_open(vport, false); diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c index 8991a891a440..f51d52297e1e 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c @@ -4641,7 +4641,7 @@ int idpf_config_rss(struct idpf_vport *vport) * idpf_fill_dflt_rss_lut - Fill the indirection table with the default values * @vport: virtual port structure */ -static void idpf_fill_dflt_rss_lut(struct idpf_vport *vport) +void idpf_fill_dflt_rss_lut(struct idpf_vport *vport) { struct idpf_adapter *adapter = vport->adapter; u16 num_active_rxq = vport->num_rxq; diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.h b/drivers/net/ethernet/intel/idpf/idpf_txrx.h index 7d20593bd877..0472698ca192 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.h +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.h @@ -1085,6 +1085,7 @@ void idpf_vport_intr_update_itr_ena_irq(struct idpf_q_vector *q_vector); void idpf_vport_intr_deinit(struct idpf_vport *vport); int idpf_vport_intr_init(struct idpf_vport *vport); void idpf_vport_intr_ena(struct idpf_vport *vport); +void idpf_fill_dflt_rss_lut(struct idpf_vport *vport); int idpf_config_rss(struct idpf_vport *vport); int idpf_init_rss_lut(struct idpf_vport *vport); void idpf_deinit_rss_lut(struct idpf_vport *vport); From 87b8ee64685bc096a087af833d4594b2332bfdb1 Mon Sep 17 00:00:00 2001 From: Sreedevi Joshi Date: Tue, 2 Dec 2025 17:12:46 -0600 Subject: [PATCH 194/283] idpf: Fix error handling in idpf_vport_open() Fix error handling to properly cleanup interrupts when idpf_vport_queue_ids_init() or idpf_rx_bufs_init_all() fail. Jump to 'intr_deinit' instead of 'queues_rel' to ensure interrupts are cleaned up before releasing other resources. Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport") Signed-off-by: Sreedevi Joshi Reviewed-by: Madhu Chittim Reviewed-by: Aleksandr Loktionov Reviewed-by: Simon Horman Tested-by: Samuel Salin Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index 003bab3ce5ae..131a8121839b 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -1524,14 +1524,14 @@ static int idpf_vport_open(struct idpf_vport *vport, bool rtnl) if (err) { dev_err(&adapter->pdev->dev, "Failed to initialize queue registers for vport %u: %d\n", vport->vport_id, err); - goto queues_rel; + goto intr_deinit; } err = idpf_rx_bufs_init_all(vport); if (err) { dev_err(&adapter->pdev->dev, "Failed to initialize RX buffers for vport %u: %d\n", vport->vport_id, err); - goto queues_rel; + goto intr_deinit; } idpf_rx_init_buf_tail(vport); From 086efe0a1ecc36cffe46640ce12649a4cd3ff171 Mon Sep 17 00:00:00 2001 From: Joshua Hay Date: Mon, 3 Nov 2025 13:20:36 -0800 Subject: [PATCH 195/283] idpf: cap maximum Rx buffer size The HW only supports a maximum Rx buffer size of 16K-128. On systems using large pages, the libeth logic can configure the buffer size to be larger than this. The upper bound is PAGE_SIZE while the lower bound is MTU rounded up to the nearest power of 2. For example, ARM systems with a 64K page size and an mtu of 9000 will set the Rx buffer size to 16K, which will cause the config Rx queues message to fail. Initialize the bufq/fill queue buf_len field to the maximum supported size. This will trigger the libeth logic to cap the maximum Rx buffer size by reducing the upper bound. Fixes: 74d1412ac8f37 ("idpf: use libeth Rx buffer management for payload buffer") Signed-off-by: Joshua Hay Acked-by: Alexander Lobakin Reviewed-by: Madhu Chittim Reviewed-by: Jacob Keller Reviewed-by: Aleksandr Loktionov Reviewed-by: David Decotigny Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_txrx.c | 8 +++++--- drivers/net/ethernet/intel/idpf/idpf_txrx.h | 1 + 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.c b/drivers/net/ethernet/intel/idpf/idpf_txrx.c index f51d52297e1e..7f3933ca9edc 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.c +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.c @@ -695,9 +695,10 @@ err: static int idpf_rx_bufs_init_singleq(struct idpf_rx_queue *rxq) { struct libeth_fq fq = { - .count = rxq->desc_count, - .type = LIBETH_FQE_MTU, - .nid = idpf_q_vector_to_mem(rxq->q_vector), + .count = rxq->desc_count, + .type = LIBETH_FQE_MTU, + .buf_len = IDPF_RX_MAX_BUF_SZ, + .nid = idpf_q_vector_to_mem(rxq->q_vector), }; int ret; @@ -754,6 +755,7 @@ static int idpf_rx_bufs_init(struct idpf_buf_queue *bufq, .truesize = bufq->truesize, .count = bufq->desc_count, .type = type, + .buf_len = IDPF_RX_MAX_BUF_SZ, .hsplit = idpf_queue_has(HSPLIT_EN, bufq), .xdp = idpf_xdp_enabled(bufq->q_vector->vport), .nid = idpf_q_vector_to_mem(bufq->q_vector), diff --git a/drivers/net/ethernet/intel/idpf/idpf_txrx.h b/drivers/net/ethernet/intel/idpf/idpf_txrx.h index 0472698ca192..423cc9486dce 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_txrx.h +++ b/drivers/net/ethernet/intel/idpf/idpf_txrx.h @@ -101,6 +101,7 @@ do { \ idx = 0; \ } while (0) +#define IDPF_RX_MAX_BUF_SZ (16384 - 128) #define IDPF_RX_BUF_STRIDE 32 #define IDPF_RX_BUF_POST_STRIDE 16 #define IDPF_LOW_WATERMARK 64 From 4648fb2f2e7210c53b85220ee07d42d1e4bae3f9 Mon Sep 17 00:00:00 2001 From: Larysa Zaremba Date: Mon, 17 Nov 2025 08:03:49 +0100 Subject: [PATCH 196/283] idpf: fix aux device unplugging when rdma is not supported by vport If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not allocate vdev_info for this vport. This leads to kernel NULL pointer dereference in idpf_idc_vport_dev_down(), which references vdev_info for every vport regardless. Check, if vdev_info was ever allocated before unplugging aux device. Fixes: be91128c579c ("idpf: implement RDMA vport auxiliary dev create, init, and destroy") Reviewed-by: Madhu Chittim Signed-off-by: Larysa Zaremba Reviewed-by: Paul Menzel Reviewed-by: Aleksandr Loktionov Tested-by: Krishneil Singh Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/idpf/idpf_idc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_idc.c b/drivers/net/ethernet/intel/idpf/idpf_idc.c index 7e20a07e98e5..6dad0593f7f2 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_idc.c +++ b/drivers/net/ethernet/intel/idpf/idpf_idc.c @@ -322,7 +322,7 @@ static void idpf_idc_vport_dev_down(struct idpf_adapter *adapter) for (i = 0; i < adapter->num_alloc_vports; i++) { struct idpf_vport *vport = adapter->vports[i]; - if (!vport) + if (!vport || !vport->vdev_info) continue; idpf_unplug_aux_dev(vport->vdev_info->adev); From 44694ffaa4e27dbda1120abfafa00732f2d52760 Mon Sep 17 00:00:00 2001 From: Shyam Sundar S K Date: Thu, 11 Dec 2025 16:58:31 +0530 Subject: [PATCH 197/283] MAINTAINERS: Add an additional maintainer to the AMD XGBE driver Add Raju Rangoju as an additional maintainer to support the AMD XGBE network device driver. Signed-off-by: Shyam Sundar S K Acked-by: Raju Rangoju Link: https://patch.msgid.link/20251211112831.1781030-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 410fd1f199f2..50d7266e1e62 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1283,6 +1283,7 @@ F: include/uapi/drm/amdxdna_accel.h AMD XGBE DRIVER M: "Shyam Sundar S K" +M: Raju Rangoju L: netdev@vger.kernel.org S: Maintained F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi From 7801edc9badd972cb62cf11c0427e70b6dca239d Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Sun, 4 Jan 2026 11:39:52 +0200 Subject: [PATCH 198/283] Revert "dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable" This reverts commit 926eae604403acfa27ba5b072af458e87e634a50, which never could have produced the intended effect: https://lore.kernel.org/netdev/AM0PR06MB10396BBF8B568D77556FC46F8F7DEA@AM0PR06MB10396.eurprd06.prod.outlook.com/ The reason why it is broken beyond repair in this form is that the mv88e6xxx driver outsources its "tx-p2p-microvolt" property to the OF node of an external Ethernet PHY. This: (a) does not work if there is no external PHY (chip-to-chip connection, or SFP module) (b) pollutes the OF property namespace / bindings of said external PHY ("tx-p2p-microvolt" could have meaning for the Ethernet PHY's SerDes interface as well) We can revisit the idea of making SerDes amplitude configurable once we have proper bindings for the mv88e6xxx SerDes. Until then, remove the code that leaves us with unnecessary baggage. Fixes: 926eae604403 ("dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable") Cc: Holger Brunck Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260104093952.486606-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mv88e6xxx/chip.c | 23 --------------- drivers/net/dsa/mv88e6xxx/chip.h | 4 --- drivers/net/dsa/mv88e6xxx/serdes.c | 46 ------------------------------ drivers/net/dsa/mv88e6xxx/serdes.h | 5 ---- 4 files changed, 78 deletions(-) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index b4d48997bf46..09002c853b78 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3364,13 +3364,10 @@ static int mv88e6xxx_setup_upstream_port(struct mv88e6xxx_chip *chip, int port) static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) { - struct device_node *phy_handle = NULL; struct fwnode_handle *ports_fwnode; struct fwnode_handle *port_fwnode; struct dsa_switch *ds = chip->ds; struct mv88e6xxx_port *p; - struct dsa_port *dp; - int tx_amp; int err; u16 reg; u32 val; @@ -3582,23 +3579,6 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) return err; } - if (chip->info->ops->serdes_set_tx_amplitude) { - dp = dsa_to_port(ds, port); - if (dp) - phy_handle = of_parse_phandle(dp->dn, "phy-handle", 0); - - if (phy_handle && !of_property_read_u32(phy_handle, - "tx-p2p-microvolt", - &tx_amp)) - err = chip->info->ops->serdes_set_tx_amplitude(chip, - port, tx_amp); - if (phy_handle) { - of_node_put(phy_handle); - if (err) - return err; - } - } - /* Port based VLAN map: give each port the same default address * database, and allow bidirectional communication between the * CPU and DSA port(s), and the other ports. @@ -4768,7 +4748,6 @@ static const struct mv88e6xxx_ops mv88e6176_ops = { .serdes_irq_mapping = mv88e6352_serdes_irq_mapping, .serdes_get_regs_len = mv88e6352_serdes_get_regs_len, .serdes_get_regs = mv88e6352_serdes_get_regs, - .serdes_set_tx_amplitude = mv88e6352_serdes_set_tx_amplitude, .gpio_ops = &mv88e6352_gpio_ops, .phylink_get_caps = mv88e6352_phylink_get_caps, .pcs_ops = &mv88e6352_pcs_ops, @@ -5044,7 +5023,6 @@ static const struct mv88e6xxx_ops mv88e6240_ops = { .serdes_irq_mapping = mv88e6352_serdes_irq_mapping, .serdes_get_regs_len = mv88e6352_serdes_get_regs_len, .serdes_get_regs = mv88e6352_serdes_get_regs, - .serdes_set_tx_amplitude = mv88e6352_serdes_set_tx_amplitude, .gpio_ops = &mv88e6352_gpio_ops, .avb_ops = &mv88e6352_avb_ops, .ptp_ops = &mv88e6352_ptp_ops, @@ -5481,7 +5459,6 @@ static const struct mv88e6xxx_ops mv88e6352_ops = { .serdes_get_stats = mv88e6352_serdes_get_stats, .serdes_get_regs_len = mv88e6352_serdes_get_regs_len, .serdes_get_regs = mv88e6352_serdes_get_regs, - .serdes_set_tx_amplitude = mv88e6352_serdes_set_tx_amplitude, .phylink_get_caps = mv88e6352_phylink_get_caps, .pcs_ops = &mv88e6352_pcs_ops, }; diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index 2f211e55cb47..e073446ee7d0 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -642,10 +642,6 @@ struct mv88e6xxx_ops { void (*serdes_get_regs)(struct mv88e6xxx_chip *chip, int port, void *_p); - /* SERDES SGMII/Fiber Output Amplitude */ - int (*serdes_set_tx_amplitude)(struct mv88e6xxx_chip *chip, int port, - int val); - /* Address Translation Unit operations */ int (*atu_get_hash)(struct mv88e6xxx_chip *chip, u8 *hash); int (*atu_set_hash)(struct mv88e6xxx_chip *chip, u8 hash); diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c index b3330211edbc..a936ee80ce00 100644 --- a/drivers/net/dsa/mv88e6xxx/serdes.c +++ b/drivers/net/dsa/mv88e6xxx/serdes.c @@ -25,14 +25,6 @@ static int mv88e6352_serdes_read(struct mv88e6xxx_chip *chip, int reg, reg, val); } -static int mv88e6352_serdes_write(struct mv88e6xxx_chip *chip, int reg, - u16 val) -{ - return mv88e6xxx_phy_page_write(chip, MV88E6352_ADDR_SERDES, - MV88E6352_SERDES_PAGE_FIBER, - reg, val); -} - static int mv88e6390_serdes_read(struct mv88e6xxx_chip *chip, int lane, int device, int reg, u16 *val) { @@ -506,41 +498,3 @@ void mv88e6390_serdes_get_regs(struct mv88e6xxx_chip *chip, int port, void *_p) p[i] = reg; } } - -static const int mv88e6352_serdes_p2p_to_reg[] = { - /* Index of value in microvolts corresponds to the register value */ - 14000, 112000, 210000, 308000, 406000, 504000, 602000, 700000, -}; - -int mv88e6352_serdes_set_tx_amplitude(struct mv88e6xxx_chip *chip, int port, - int val) -{ - bool found = false; - u16 ctrl, reg; - int err; - int i; - - err = mv88e6352_g2_scratch_port_has_serdes(chip, port); - if (err <= 0) - return err; - - for (i = 0; i < ARRAY_SIZE(mv88e6352_serdes_p2p_to_reg); ++i) { - if (mv88e6352_serdes_p2p_to_reg[i] == val) { - reg = i; - found = true; - break; - } - } - - if (!found) - return -EINVAL; - - err = mv88e6352_serdes_read(chip, MV88E6352_SERDES_SPEC_CTRL2, &ctrl); - if (err) - return err; - - ctrl &= ~MV88E6352_SERDES_OUT_AMP_MASK; - ctrl |= reg; - - return mv88e6352_serdes_write(chip, MV88E6352_SERDES_SPEC_CTRL2, ctrl); -} diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h index ad887d8601bc..17a3e85fabaa 100644 --- a/drivers/net/dsa/mv88e6xxx/serdes.h +++ b/drivers/net/dsa/mv88e6xxx/serdes.h @@ -29,8 +29,6 @@ struct phylink_link_state; #define MV88E6352_SERDES_INT_FIBRE_ENERGY BIT(4) #define MV88E6352_SERDES_INT_STATUS 0x13 -#define MV88E6352_SERDES_SPEC_CTRL2 0x1a -#define MV88E6352_SERDES_OUT_AMP_MASK 0x0007 #define MV88E6341_PORT5_LANE 0x15 @@ -140,9 +138,6 @@ void mv88e6352_serdes_get_regs(struct mv88e6xxx_chip *chip, int port, void *_p); int mv88e6390_serdes_get_regs_len(struct mv88e6xxx_chip *chip, int port); void mv88e6390_serdes_get_regs(struct mv88e6xxx_chip *chip, int port, void *_p); -int mv88e6352_serdes_set_tx_amplitude(struct mv88e6xxx_chip *chip, int port, - int val); - /* Return the (first) SERDES lane address a port is using, -errno otherwise. */ static inline int mv88e6xxx_serdes_get_lane(struct mv88e6xxx_chip *chip, int port) From e5c8eda39a9fc1547d1398d707aa06c1d080abdd Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 5 Jan 2026 09:36:30 +0000 Subject: [PATCH 199/283] udp: call skb_orphan() before skb_attempt_defer_free() Standard UDP receive path does not use skb->destructor. But skmsg layer does use it, since it calls skb_set_owner_sk_safe() from udp_read_skb(). This then triggers this warning in skb_attempt_defer_free(): DEBUG_NET_WARN_ON_ONCE(skb->destructor); We must call skb_orphan() to fix this issue. Fixes: 6471658dc66c ("udp: use skb_attempt_defer_free()") Reported-by: syzbot+3e68572cf2286ce5ebe9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/695b83bd.050a0220.1c9965.002b.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260105093630.1976085-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv4/udp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index ffe074cb5865..ee63af0ef42c 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1851,6 +1851,7 @@ void skb_consume_udp(struct sock *sk, struct sk_buff *skb, int len) sk_peek_offset_bwd(sk, len); if (!skb_shared(skb)) { + skb_orphan(skb); skb_attempt_defer_free(skb); return; } From 13ff3e724207f579d3c814ee05516fefcb4f32e8 Mon Sep 17 00:00:00 2001 From: Maxime Chevallier Date: Mon, 5 Jan 2026 16:18:39 +0100 Subject: [PATCH 200/283] net: sfp: return the number of written bytes for smbus single byte access We expect the SFP write accessors to return the number of written bytes. We fail to do so for single-byte smbus accesses, which may cause errors when setting a module's high-power state and for some cotsworks modules. Let's return the amount of written bytes, as expected. Fixes: 7662abf4db94 ("net: phy: sfp: Add support for SMBus module access") Signed-off-by: Maxime Chevallier Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260105151840.144552-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/sfp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 6166e9196364..84bef5099dda 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -765,7 +765,7 @@ static int sfp_smbus_byte_write(struct sfp *sfp, bool a2, u8 dev_addr, dev_addr++; } - return 0; + return data - (u8 *)buf; } static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c) From adb25a46dc0a43173f5ea5f5f58fc8ba28970c7c Mon Sep 17 00:00:00 2001 From: Shivani Gupta Date: Mon, 5 Jan 2026 00:59:05 +0000 Subject: [PATCH 201/283] net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy syzbot reported a crash in tc_act_in_hw() during netns teardown where tcf_idrinfo_destroy() passed an ERR_PTR(-EBUSY) value as a tc_action pointer, leading to an invalid dereference. Guard against ERR_PTR entries when iterating the action IDR so teardown does not call tc_act_in_hw() on an error pointer. Fixes: 84a7d6797e6a ("net/sched: acp_api: no longer acquire RTNL in tc_action_net_exit()") Link: https://syzkaller.appspot.com/bug?extid=8f1c492ffa4644ff3826 Reported-by: syzbot+8f1c492ffa4644ff3826@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8f1c492ffa4644ff3826 Signed-off-by: Shivani Gupta Link: https://patch.msgid.link/20260105005905.243423-1-shivani07g@gmail.com Signed-off-by: Jakub Kicinski --- net/sched/act_api.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/sched/act_api.c b/net/sched/act_api.c index ff6be5cfe2b0..e1ab0faeb811 100644 --- a/net/sched/act_api.c +++ b/net/sched/act_api.c @@ -940,6 +940,8 @@ void tcf_idrinfo_destroy(const struct tc_action_ops *ops, int ret; idr_for_each_entry_ul(idr, p, tmp, id) { + if (IS_ERR(p)) + continue; if (tc_act_in_hw(p) && !mutex_taken) { rtnl_lock(); mutex_taken = true; From 353cfc0ef3f34ef7fe313ae38dac37f2454a7cf5 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 5 Jan 2026 18:33:19 +0200 Subject: [PATCH 202/283] selftests: drv-net: Bring back tool() to driver __init__s The pp_alloc_fail.py test (which doesn't run in NIPA CI?) uses tool, add back the import. Resolves: ImportError: cannot import name 'tool' from 'lib.py' Fixes: 68a052239fc4 ("selftests: drv-net: update remaining Python init files") Reviewed-by: Nimrod Oren Signed-off-by: Gal Pressman Link: https://patch.msgid.link/20260105163319.47619-1-gal@nvidia.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/drivers/net/hw/lib/py/__init__.py | 4 ++-- tools/testing/selftests/net/lib/py/__init__.py | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py index 766bfc4ad842..d5d247eca6b7 100644 --- a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py +++ b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py @@ -22,7 +22,7 @@ try: NlError, RtnlFamily, DevlinkFamily, PSPFamily from net.lib.py import CmdExitFailure from net.lib.py import bkg, cmd, bpftool, bpftrace, defer, ethtool, \ - fd_read_timeout, ip, rand_port, wait_port_listen, wait_file + fd_read_timeout, ip, rand_port, wait_port_listen, wait_file, tool from net.lib.py import KsftSkipEx, KsftFailEx, KsftXfailEx from net.lib.py import ksft_disruptive, ksft_exit, ksft_pr, ksft_run, \ ksft_setup, ksft_variants, KsftNamedVariant @@ -37,7 +37,7 @@ try: "CmdExitFailure", "bkg", "cmd", "bpftool", "bpftrace", "defer", "ethtool", "fd_read_timeout", "ip", "rand_port", - "wait_port_listen", "wait_file", + "wait_port_listen", "wait_file", "tool", "KsftSkipEx", "KsftFailEx", "KsftXfailEx", "ksft_disruptive", "ksft_exit", "ksft_pr", "ksft_run", "ksft_setup", "ksft_variants", "KsftNamedVariant", diff --git a/tools/testing/selftests/net/lib/py/__init__.py b/tools/testing/selftests/net/lib/py/__init__.py index 40f9ce307dd1..f528b67639de 100644 --- a/tools/testing/selftests/net/lib/py/__init__.py +++ b/tools/testing/selftests/net/lib/py/__init__.py @@ -13,7 +13,7 @@ from .ksft import KsftFailEx, KsftSkipEx, KsftXfailEx, ksft_pr, ksft_eq, \ from .netns import NetNS, NetNSEnter from .nsim import NetdevSim, NetdevSimDev from .utils import CmdExitFailure, fd_read_timeout, cmd, bkg, defer, \ - bpftool, ip, ethtool, bpftrace, rand_port, wait_port_listen, wait_file + bpftool, ip, ethtool, bpftrace, rand_port, wait_port_listen, wait_file, tool from .ynl import NlError, YnlFamily, EthtoolFamily, NetdevFamily, RtnlFamily, RtnlAddrFamily from .ynl import NetshaperFamily, DevlinkFamily, PSPFamily @@ -26,7 +26,7 @@ __all__ = ["KSRC", "NetNS", "NetNSEnter", "CmdExitFailure", "fd_read_timeout", "cmd", "bkg", "defer", "bpftool", "ip", "ethtool", "bpftrace", "rand_port", - "wait_port_listen", "wait_file", + "wait_port_listen", "wait_file", "tool", "NetdevSim", "NetdevSimDev", "NetshaperFamily", "DevlinkFamily", "PSPFamily", "NlError", "YnlFamily", "EthtoolFamily", "NetdevFamily", "RtnlFamily", From d83dddffe1904e4a576d11a541878850a8e64cd2 Mon Sep 17 00:00:00 2001 From: Yohei Kojima Date: Tue, 6 Jan 2026 00:17:32 +0900 Subject: [PATCH 203/283] net: netdevsim: fix inconsistent carrier state after link/unlink This patch fixes the edge case behavior on ifup/ifdown and linking/unlinking two netdevsim interfaces: 1. unlink two interfaces netdevsim1 and netdevsim2 2. ifdown netdevsim1 3. ifup netdevsim1 4. link two interfaces netdevsim1 and netdevsim2 5. (Now two interfaces are linked in terms of netdevsim peer, but carrier state of the two interfaces remains DOWN.) This inconsistent behavior is caused by the current implementation, which only cares about the "link, then ifup" order, not "ifup, then link" order. This patch fixes the inconsistency by calling netif_carrier_on() when two netdevsim interfaces are linked. This patch fixes buggy behavior on NetworkManager-based systems which causes the netdevsim test to fail with the following error: # timeout set to 600 # selftests: drivers/net/netdevsim: peer.sh # 2025/12/25 00:54:03 socat[9115] W address is opened in read-write mode but only supports read-only # 2025/12/25 00:56:17 socat[9115] W connect(7, AF=2 192.168.1.1:1234, 16): Connection timed out # 2025/12/25 00:56:17 socat[9115] E TCP:192.168.1.1:1234: Connection timed out # expected 3 bytes, got 0 # 2025/12/25 00:56:17 socat[9109] W exiting on signal 15 not ok 13 selftests: drivers/net/netdevsim: peer.sh # exit=1 This patch also solves timeout on TCP Fast Open (TFO) test in NetworkManager-based systems because it also depends on netdevsim's carrier consistency. Fixes: 1a8fed52f7be ("netdevsim: set the carrier when the device goes up") Signed-off-by: Yohei Kojima Reviewed-by: Breno Leitao Link: https://patch.msgid.link/602c9e1ba5bb2ee1997bb38b1d866c9c3b807ae9.1767624906.git.yk@y-koj.net Signed-off-by: Jakub Kicinski --- drivers/net/netdevsim/bus.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/netdevsim/bus.c b/drivers/net/netdevsim/bus.c index 70e8c38ddad6..d16b95304aa7 100644 --- a/drivers/net/netdevsim/bus.c +++ b/drivers/net/netdevsim/bus.c @@ -332,6 +332,11 @@ static ssize_t link_device_store(const struct bus_type *bus, const char *buf, si rcu_assign_pointer(nsim_a->peer, nsim_b); rcu_assign_pointer(nsim_b->peer, nsim_a); + if (netif_running(dev_a) && netif_running(dev_b)) { + netif_carrier_on(dev_a); + netif_carrier_on(dev_b); + } + out_err: put_net(ns_b); put_net(ns_a); @@ -381,6 +386,9 @@ static ssize_t unlink_device_store(const struct bus_type *bus, const char *buf, if (!peer) goto out_put_netns; + netif_carrier_off(dev); + netif_carrier_off(peer->netdev); + err = 0; RCU_INIT_POINTER(nsim->peer, NULL); RCU_INIT_POINTER(peer->peer, NULL); From 75df712cddfd6c76e0e255584766385648ad9529 Mon Sep 17 00:00:00 2001 From: Yohei Kojima Date: Tue, 6 Jan 2026 00:17:33 +0900 Subject: [PATCH 204/283] selftests: netdevsim: add carrier state consistency test This commit adds a test case for netdevsim carrier state consistency. Specifically, the added test verifies the carrier state during the following operations: 1. Unlink two netdevsims 2. ifdown one netdevsim, then ifup again 3. Link the netdevsims again 4. ifdown one netdevsim, then ifup again These steps verifies that the carrier is UP iff two netdevsims are linked and ifuped. Signed-off-by: Yohei Kojima Link: https://patch.msgid.link/481e2729e53b6074ebfc0ad85764d8feb244de8c.1767624906.git.yk@y-koj.net Signed-off-by: Jakub Kicinski --- .../selftests/drivers/net/netdevsim/peer.sh | 59 +++++++++++++++++++ 1 file changed, 59 insertions(+) diff --git a/tools/testing/selftests/drivers/net/netdevsim/peer.sh b/tools/testing/selftests/drivers/net/netdevsim/peer.sh index 7f32b5600925..f4721f7636dd 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/peer.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/peer.sh @@ -52,6 +52,39 @@ cleanup_ns() ip netns del nssv } +is_carrier_up() +{ + local netns="$1" + local nsim_dev="$2" + + test "$(ip netns exec "$netns" \ + cat /sys/class/net/"$nsim_dev"/carrier 2>/dev/null)" -eq 1 +} + +assert_carrier_up() +{ + local netns="$1" + local nsim_dev="$2" + + if ! is_carrier_up "$netns" "$nsim_dev"; then + echo "$nsim_dev's carrier should be UP, but it isn't" + cleanup_ns + exit 1 + fi +} + +assert_carrier_down() +{ + local netns="$1" + local nsim_dev="$2" + + if is_carrier_up "$netns" "$nsim_dev"; then + echo "$nsim_dev's carrier should be DOWN, but it isn't" + cleanup_ns + exit 1 + fi +} + ### ### Code start ### @@ -113,6 +146,32 @@ if [ $? -eq 0 ]; then exit 1 fi +# netdevsim carrier state consistency checking +assert_carrier_up nssv "$NSIM_DEV_1_NAME" +assert_carrier_up nscl "$NSIM_DEV_2_NAME" + +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX" > "$NSIM_DEV_SYS_UNLINK" + +assert_carrier_down nssv "$NSIM_DEV_1_NAME" +assert_carrier_down nscl "$NSIM_DEV_2_NAME" + +ip netns exec nssv ip link set dev "$NSIM_DEV_1_NAME" down +ip netns exec nssv ip link set dev "$NSIM_DEV_1_NAME" up + +assert_carrier_down nssv "$NSIM_DEV_1_NAME" +assert_carrier_down nscl "$NSIM_DEV_2_NAME" + +echo "$NSIM_DEV_1_FD:$NSIM_DEV_1_IFIDX $NSIM_DEV_2_FD:$NSIM_DEV_2_IFIDX" > $NSIM_DEV_SYS_LINK + +assert_carrier_up nssv "$NSIM_DEV_1_NAME" +assert_carrier_up nscl "$NSIM_DEV_2_NAME" + +ip netns exec nssv ip link set dev "$NSIM_DEV_1_NAME" down +ip netns exec nssv ip link set dev "$NSIM_DEV_1_NAME" up + +assert_carrier_up nssv "$NSIM_DEV_1_NAME" +assert_carrier_up nscl "$NSIM_DEV_2_NAME" + # send/recv packets tmp_file=$(mktemp) From 7d121d701d58a92f26decb10da1d04a88b74519d Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 6 Jan 2026 06:26:57 -0800 Subject: [PATCH 205/283] blk-rq-qos: Remove unlikely() hints from QoS checks The unlikely() annotations on QUEUE_FLAG_QOS_ENABLED checks are counterproductive. Writeback throttling (WBT) might be enabled by default, mainly because CONFIG_BLK_WBT_MQ defaults to 'y'. Branch profiling on Meta servers, which have WBT enabled, confirms 100% misprediction rates on these checks. Remove the unlikely() annotations to let the CPU's branch predictor learn the actual behavior, potentially improving I/O path performance. Signed-off-by: Breno Leitao Signed-off-by: Jens Axboe --- block/blk-rq-qos.h | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/block/blk-rq-qos.h b/block/blk-rq-qos.h index b538f2c0febc..a747a504fe42 100644 --- a/block/blk-rq-qos.h +++ b/block/blk-rq-qos.h @@ -112,29 +112,26 @@ void __rq_qos_queue_depth_changed(struct rq_qos *rqos); static inline void rq_qos_cleanup(struct request_queue *q, struct bio *bio) { - if (unlikely(test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags)) && - q->rq_qos) + if (test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags) && q->rq_qos) __rq_qos_cleanup(q->rq_qos, bio); } static inline void rq_qos_done(struct request_queue *q, struct request *rq) { - if (unlikely(test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags)) && - q->rq_qos && !blk_rq_is_passthrough(rq)) + if (test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags) && + q->rq_qos && !blk_rq_is_passthrough(rq)) __rq_qos_done(q->rq_qos, rq); } static inline void rq_qos_issue(struct request_queue *q, struct request *rq) { - if (unlikely(test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags)) && - q->rq_qos) + if (test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags) && q->rq_qos) __rq_qos_issue(q->rq_qos, rq); } static inline void rq_qos_requeue(struct request_queue *q, struct request *rq) { - if (unlikely(test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags)) && - q->rq_qos) + if (test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags) && q->rq_qos) __rq_qos_requeue(q->rq_qos, rq); } @@ -162,8 +159,7 @@ static inline void rq_qos_done_bio(struct bio *bio) static inline void rq_qos_throttle(struct request_queue *q, struct bio *bio) { - if (unlikely(test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags)) && - q->rq_qos) { + if (test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags) && q->rq_qos) { bio_set_flag(bio, BIO_QOS_THROTTLED); __rq_qos_throttle(q->rq_qos, bio); } @@ -172,16 +168,14 @@ static inline void rq_qos_throttle(struct request_queue *q, struct bio *bio) static inline void rq_qos_track(struct request_queue *q, struct request *rq, struct bio *bio) { - if (unlikely(test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags)) && - q->rq_qos) + if (test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags) && q->rq_qos) __rq_qos_track(q->rq_qos, rq, bio); } static inline void rq_qos_merge(struct request_queue *q, struct request *rq, struct bio *bio) { - if (unlikely(test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags)) && - q->rq_qos) { + if (test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags) && q->rq_qos) { bio_set_flag(bio, BIO_QOS_MERGED); __rq_qos_merge(q->rq_qos, rq, bio); } @@ -189,8 +183,7 @@ static inline void rq_qos_merge(struct request_queue *q, struct request *rq, static inline void rq_qos_queue_depth_changed(struct request_queue *q) { - if (unlikely(test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags)) && - q->rq_qos) + if (test_bit(QUEUE_FLAG_QOS_ENABLED, &q->queue_flags) && q->rq_qos) __rq_qos_queue_depth_changed(q->rq_qos); } From 6acd4ac5f8f0ec9b946875553e52907700bcfc77 Mon Sep 17 00:00:00 2001 From: Caleb Sander Mateos Date: Tue, 6 Jan 2026 13:08:37 -0700 Subject: [PATCH 206/283] block: don't merge bios with different app_tags nvme_set_app_tag() uses the app_tag value from the bio_integrity_payload of the struct request's first bio. This assumes all the request's bios have the same app_tag. However, it is possible for bios with different app_tag values to be merged into a single request. Add a check in blk_integrity_merge_{bio,rq}() to prevent the merging of bios/requests with different app_tag values if BIP_CHECK_APPTAG is set. Signed-off-by: Caleb Sander Mateos Fixes: 3d8b5a22d404 ("block: add support to pass user meta buffer") Signed-off-by: Jens Axboe --- block/blk-integrity.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/block/blk-integrity.c b/block/blk-integrity.c index 9b27963680dc..964eebbee14d 100644 --- a/block/blk-integrity.c +++ b/block/blk-integrity.c @@ -140,14 +140,21 @@ EXPORT_SYMBOL_GPL(blk_rq_integrity_map_user); bool blk_integrity_merge_rq(struct request_queue *q, struct request *req, struct request *next) { + struct bio_integrity_payload *bip, *bip_next; + if (blk_integrity_rq(req) == 0 && blk_integrity_rq(next) == 0) return true; if (blk_integrity_rq(req) == 0 || blk_integrity_rq(next) == 0) return false; - if (bio_integrity(req->bio)->bip_flags != - bio_integrity(next->bio)->bip_flags) + bip = bio_integrity(req->bio); + bip_next = bio_integrity(next->bio); + if (bip->bip_flags != bip_next->bip_flags) + return false; + + if (bip->bip_flags & BIP_CHECK_APPTAG && + bip->app_tag != bip_next->app_tag) return false; if (req->nr_integrity_segments + next->nr_integrity_segments > @@ -163,15 +170,21 @@ bool blk_integrity_merge_rq(struct request_queue *q, struct request *req, bool blk_integrity_merge_bio(struct request_queue *q, struct request *req, struct bio *bio) { + struct bio_integrity_payload *bip, *bip_bio = bio_integrity(bio); int nr_integrity_segs; - if (blk_integrity_rq(req) == 0 && bio_integrity(bio) == NULL) + if (blk_integrity_rq(req) == 0 && bip_bio == NULL) return true; - if (blk_integrity_rq(req) == 0 || bio_integrity(bio) == NULL) + if (blk_integrity_rq(req) == 0 || bip_bio == NULL) return false; - if (bio_integrity(req->bio)->bip_flags != bio_integrity(bio)->bip_flags) + bip = bio_integrity(req->bio); + if (bip->bip_flags != bip_bio->bip_flags) + return false; + + if (bip->bip_flags & BIP_CHECK_APPTAG && + bip->app_tag != bip_bio->app_tag) return false; nr_integrity_segs = blk_rq_count_integrity_sg(q, bio); From 20cf2aed89ac6d78a0122e31c875228e15247194 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Tue, 6 Jan 2026 10:00:11 +0100 Subject: [PATCH 207/283] gpio: rockchip: mark the GPIO controller as sleeping The GPIO controller is configured as non-sleeping but it uses generic pinctrl helpers which use a mutex for synchronization. This can cause the following lockdep splat with shared GPIOs enabled on boards which have multiple devices using the same GPIO: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 12, name: kworker/u16:0 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 6 locks held by kworker/u16:0/12: #0: ffff0001f0018d48 ((wq_completion)events_unbound#2){+.+.}-{0:0}, at: process_one_work+0x18c/0x604 #1: ffff8000842dbdf0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x604 #2: ffff0001f18498f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x1b0 #3: ffff0001f75f1e90 (&gdev->srcu){.+.?}-{0:0}, at: gpiod_direction_output_raw_commit+0x0/0x360 #4: ffff0001f46e3db8 (&shared_desc->spinlock){....}-{3:3}, at: gpio_shared_proxy_direction_output+0xd0/0x144 [gpio_shared_proxy] #5: ffff0001f180ee90 (&gdev->srcu){.+.?}-{0:0}, at: gpiod_direction_output_raw_commit+0x0/0x360 irq event stamp: 81450 hardirqs last enabled at (81449): [] _raw_spin_unlock_irqrestore+0x74/0x78 hardirqs last disabled at (81450): [] _raw_spin_lock_irqsave+0x84/0x88 softirqs last enabled at (79616): [] __alloc_skb+0x17c/0x1e8 softirqs last disabled at (79614): [] __alloc_skb+0x17c/0x1e8 CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.0-rc4-next-20260105+ #11975 PREEMPT Hardware name: Hardkernel ODROID-M1 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 __might_resched+0x144/0x248 __might_sleep+0x48/0x98 __mutex_lock+0x5c/0x894 mutex_lock_nested+0x24/0x30 pinctrl_get_device_gpio_range+0x44/0x128 pinctrl_gpio_direction+0x3c/0xe0 pinctrl_gpio_direction_output+0x14/0x20 rockchip_gpio_direction_output+0xb8/0x19c gpiochip_direction_output+0x38/0x94 gpiod_direction_output_raw_commit+0x1d8/0x360 gpiod_direction_output_nonotify+0x7c/0x230 gpiod_direction_output+0x34/0xf8 gpio_shared_proxy_direction_output+0xec/0x144 [gpio_shared_proxy] gpiochip_direction_output+0x38/0x94 gpiod_direction_output_raw_commit+0x1d8/0x360 gpiod_direction_output_nonotify+0x7c/0x230 gpiod_configure_flags+0xbc/0x480 gpiod_find_and_request+0x1a0/0x574 gpiod_get_index+0x58/0x84 devm_gpiod_get_index+0x20/0xb4 devm_gpiod_get_optional+0x18/0x30 rockchip_pcie_probe+0x98/0x380 platform_probe+0x5c/0xac really_probe+0xbc/0x298 Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Cc: stable@vger.kernel.org Reported-by: Marek Szyprowski Closes: https://lore.kernel.org/all/d035fc29-3b03-4cd6-b8ec-001f93540bc6@samsung.com/ Acked-by: Heiko Stuebner Link: https://lore.kernel.org/r/20260106090011.21603-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-rockchip.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c index 47174eb3ba76..bae2061f15fc 100644 --- a/drivers/gpio/gpio-rockchip.c +++ b/drivers/gpio/gpio-rockchip.c @@ -593,6 +593,7 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank) gc->ngpio = bank->nr_pins; gc->label = bank->name; gc->parent = bank->dev; + gc->can_sleep = true; ret = gpiochip_add_data(gc, bank); if (ret) { From 0fe50631791bd3504dc7f32af6421bd4041f14aa Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Tue, 6 Jan 2026 10:34:21 +0100 Subject: [PATCH 208/283] gpio: shared: assign the correct firmware node for reset-gpio use-case When we defer probe due to unlucky timing of adding the lookup table, we assign the matching firmware node to the shared reference for the future probing. However, the fwnode we assign is wrong so fix it and assign the one associated with the reset-gpio device. Fixes: 49416483a953 ("gpio: shared: allow sharing a reset-gpios pin between reset-gpio and gpiolib") Reported-by: Marek Szyprowski Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/ Tested-by: Mark Brown Link: https://lore.kernel.org/r/20260106-gpio-shared-fixes-v2-1-c7091d2f7581@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-shared.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpiolib-shared.c b/drivers/gpio/gpiolib-shared.c index baf7e07a3bb8..a68af06a6cc4 100644 --- a/drivers/gpio/gpiolib-shared.c +++ b/drivers/gpio/gpiolib-shared.c @@ -417,7 +417,7 @@ static bool gpio_shared_dev_is_reset_gpio(struct device *consumer, * Reuse the fwnode of the real device, next time we'll use it * in the normal path. */ - ref->fwnode = fwnode_handle_get(real_ref->fwnode); + ref->fwnode = fwnode_handle_get(reset_fwnode); return true; } From 476e44d06fc107f8cd99695d8e4f1c792dfc3379 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Tue, 6 Jan 2026 10:34:22 +0100 Subject: [PATCH 209/283] gpio: shared: fix a race condition When matching the reset-gpio reference with the actual firmware node consuming the GPIO, we also need to lock the structure associated with the latter as it can change while we're doing it. Due to triggering lockdep false-positives, we need to use a per-reference lockdep class but accidentally, this also allows us to remove the previous lockdep workaround for cleaner code. Fixes: 49416483a953 ("gpio: shared: allow sharing a reset-gpios pin between reset-gpio and gpiolib") Reported-by: Marek Szyprowski Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/ Tested-by: Mark Brown Link: https://lore.kernel.org/r/20260106-gpio-shared-fixes-v2-2-c7091d2f7581@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-shared.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/gpio/gpiolib-shared.c b/drivers/gpio/gpiolib-shared.c index a68af06a6cc4..4c57b0928760 100644 --- a/drivers/gpio/gpiolib-shared.c +++ b/drivers/gpio/gpiolib-shared.c @@ -38,6 +38,7 @@ struct gpio_shared_ref { int dev_id; /* Protects the auxiliary device struct and the lookup table. */ struct mutex lock; + struct lock_class_key lock_key; struct auxiliary_device adev; struct gpiod_lookup_table *lookup; }; @@ -99,7 +100,8 @@ static struct gpio_shared_ref *gpio_shared_make_ref(struct fwnode_handle *fwnode ref->flags = flags; ref->con_id = no_free_ptr(con_id_cpy); ref->fwnode = fwnode; - mutex_init(&ref->lock); + lockdep_register_key(&ref->lock_key); + mutex_init_with_key(&ref->lock, &ref->lock_key); return no_free_ptr(ref); } @@ -378,6 +380,11 @@ static bool gpio_shared_dev_is_reset_gpio(struct device *consumer, * arguments match the ones from this consumer's node. */ list_for_each_entry(real_ref, &entry->refs, list) { + if (real_ref == ref) + continue; + + guard(mutex)(&real_ref->lock); + if (!real_ref->fwnode) continue; @@ -568,15 +575,6 @@ void gpio_device_teardown_shared(struct gpio_device *gdev) if (!device_match_fwnode(&gdev->dev, entry->fwnode)) continue; - /* - * For some reason if we call synchronize_srcu() in GPIO core, - * descent here and take this mutex and then recursively call - * synchronize_srcu() again from gpiochip_remove() (which is - * totally fine) called after gpio_shared_remove_adev(), - * lockdep prints a false positive deadlock splat. Disable - * lockdep here. - */ - lockdep_off(); list_for_each_entry(ref, &entry->refs, list) { guard(mutex)(&ref->lock); @@ -589,7 +587,6 @@ void gpio_device_teardown_shared(struct gpio_device *gdev) gpio_shared_remove_adev(&ref->adev); } - lockdep_on(); } } @@ -685,6 +682,7 @@ static void gpio_shared_drop_ref(struct gpio_shared_ref *ref) { list_del(&ref->list); mutex_destroy(&ref->lock); + lockdep_unregister_key(&ref->lock_key); kfree(ref->con_id); ida_free(&gpio_shared_ida, ref->dev_id); fwnode_handle_put(ref->fwnode); From a80208072df8f4ceb53cd905c1f4362f84ce397f Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Tue, 6 Jan 2026 10:34:23 +0100 Subject: [PATCH 210/283] gpio: shared: don't allocate the lookup table until we really need it We allocate memory for the GPIO lookup table at the top of gpio_shared_add_proxy_lookup() but we don't use it until the very end. Depending on the timing, we may return earlier. Move the allocation towards the end. Fixes: a060b8c511ab ("gpiolib: implement low-level, shared GPIO support") Tested-by: Mark Brown Link: https://lore.kernel.org/r/20260106-gpio-shared-fixes-v2-3-c7091d2f7581@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-shared.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpio/gpiolib-shared.c b/drivers/gpio/gpiolib-shared.c index 4c57b0928760..076d8642675c 100644 --- a/drivers/gpio/gpiolib-shared.c +++ b/drivers/gpio/gpiolib-shared.c @@ -443,14 +443,10 @@ int gpio_shared_add_proxy_lookup(struct device *consumer, const char *con_id, unsigned long lflags) { const char *dev_id = dev_name(consumer); + struct gpiod_lookup_table *lookup; struct gpio_shared_entry *entry; struct gpio_shared_ref *ref; - struct gpiod_lookup_table *lookup __free(kfree) = - kzalloc(struct_size(lookup, table, 2), GFP_KERNEL); - if (!lookup) - return -ENOMEM; - list_for_each_entry(entry, &gpio_shared_list, list) { list_for_each_entry(ref, &entry->refs, list) { guard(mutex)(&ref->lock); @@ -482,6 +478,10 @@ int gpio_shared_add_proxy_lookup(struct device *consumer, const char *con_id, if (!key) return -ENOMEM; + lookup = kzalloc(struct_size(lookup, table, 2), GFP_KERNEL); + if (!lookup) + return -ENOMEM; + pr_debug("Adding machine lookup entry for a shared GPIO for consumer %s, with key '%s' and con_id '%s'\n", dev_id, key, ref->con_id ?: "none"); @@ -489,7 +489,7 @@ int gpio_shared_add_proxy_lookup(struct device *consumer, const char *con_id, lookup->table[0] = GPIO_LOOKUP(no_free_ptr(key), 0, ref->con_id, lflags); - ref->lookup = no_free_ptr(lookup); + ref->lookup = lookup; gpiod_add_lookup_table(ref->lookup); return 0; From 8e6ad0dac6266c5e13874e816b016759d7145500 Mon Sep 17 00:00:00 2001 From: Marco Crivellari Date: Tue, 4 Nov 2025 12:29:23 +0100 Subject: [PATCH 211/283] drm/exynos: hdmi: replace use of system_wq with system_percpu_wq Currently if a user enqueue a work item using schedule_delayed_work() the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to schedule_work() that is using system_wq and queue_work(), that makes use again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be addressed without refactoring the API. This patch continues the effort to refactor worqueue APIs, which has begun with the change introducing new workqueues and a new alloc_workqueue flag: commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq") commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag") system_wq should be the per-cpu workqueue, yet in this name nothing makes that clear, so replace system_wq with system_percpu_wq. The old wq (system_wq) will be kept for a few release cycles. Suggested-by: Tejun Heo Signed-off-by: Marco Crivellari Signed-off-by: Inki Dae --- drivers/gpu/drm/exynos/exynos_hdmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 01813e11e6c6..8e76ac8ee4e2 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1692,7 +1692,7 @@ static irqreturn_t hdmi_irq_thread(int irq, void *arg) { struct hdmi_context *hdata = arg; - mod_delayed_work(system_wq, &hdata->hotplug_work, + mod_delayed_work(system_percpu_wq, &hdata->hotplug_work, msecs_to_jiffies(HOTPLUG_DEBOUNCE_MS)); return IRQ_HANDLED; From b7666c891cc7e1a157cd99bca737631c8be07504 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Tue, 6 Jan 2026 16:30:54 +0100 Subject: [PATCH 212/283] HID: bpf: fix bpf compilation with -fms-extensions Similar to commit 835a50753579 ("selftests/bpf: Add -fms-extensions to bpf build flags") and commit 639f58a0f480 ("bpftool: Fix build warnings due to MS extensions") The kernel is now built with -fms-extensions, therefore generated vmlinux.h contains types like: struct slab { .. struct freelist_counters; }; Use -fms-extensions and -Wno-microsoft-anon-tag flags to build bpf programs that #include "vmlinux.h" Signed-off-by: Benjamin Tissoires --- drivers/hid/bpf/progs/Makefile | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/hid/bpf/progs/Makefile b/drivers/hid/bpf/progs/Makefile index ec1fc642fd63..66b8f38e591d 100644 --- a/drivers/hid/bpf/progs/Makefile +++ b/drivers/hid/bpf/progs/Makefile @@ -56,8 +56,10 @@ clean: %.bpf.o: %.bpf.c vmlinux.h $(BPFOBJ) | $(OUTPUT) $(call msg,BPF,$@) - $(Q)$(CLANG) -g -O2 --target=bpf -Wall -Werror $(INCLUDES) \ - -c $(filter %.c,$^) -o $@ && \ + $(Q)$(CLANG) -g -O2 --target=bpf -Wall -Werror $(INCLUDES) \ + -Wno-microsoft-anon-tag \ + -fms-extensions \ + -c $(filter %.c,$^) -o $@ && \ $(LLVM_STRIP) -g $@ vmlinux.h: $(VMLINUX_BTF) $(BPFTOOL) | $(INCLUDE_DIR) From e03fb369b083ab66d72fb63fe7817e933c3d4a30 Mon Sep 17 00:00:00 2001 From: Benjamin Tissoires Date: Tue, 6 Jan 2026 16:30:55 +0100 Subject: [PATCH 213/283] selftests/hid: fix bpf compilations due to -fms-extensions Similar to commit 835a50753579 ("selftests/bpf: Add -fms-extensions to bpf build flags") and commit 639f58a0f480 ("bpftool: Fix build warnings due to MS extensions") The kernel is now built with -fms-extensions, therefore generated vmlinux.h contains types like: struct slab { .. struct freelist_counters; }; Use -fms-extensions and -Wno-microsoft-anon-tag flags to build bpf programs that #include "vmlinux.h" Signed-off-by: Benjamin Tissoires --- tools/testing/selftests/hid/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/hid/Makefile b/tools/testing/selftests/hid/Makefile index 2839d2612ce3..50ec9e0406ab 100644 --- a/tools/testing/selftests/hid/Makefile +++ b/tools/testing/selftests/hid/Makefile @@ -184,6 +184,8 @@ MENDIAN=$(if $(IS_LITTLE_ENDIAN),-mlittle-endian,-mbig-endian) CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG)) BPF_CFLAGS = -g -Werror -D__TARGET_ARCH_$(SRCARCH) $(MENDIAN) \ + -Wno-microsoft-anon-tag \ + -fms-extensions \ -I$(INCLUDE_DIR) CLANG_CFLAGS = $(CLANG_SYS_INCLUDES) \ From dd76788f9ec4f33f0f43838cac1304265d944328 Mon Sep 17 00:00:00 2001 From: Tim Zimmermann Date: Fri, 28 Nov 2025 08:54:22 +0100 Subject: [PATCH 214/283] hid: intel-thc-hid: Select SGL_ALLOC intel-thc-dma.c uses sgl_alloc() resulting in a build failure if CONFIG_SGL_ALLOC is not enabled Signed-off-by: Tim Zimmermann Reviewed-by: Even Xu Signed-off-by: Benjamin Tissoires --- drivers/hid/intel-thc-hid/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/intel-thc-hid/Kconfig b/drivers/hid/intel-thc-hid/Kconfig index 0351d1137607..9d74e53b8c62 100644 --- a/drivers/hid/intel-thc-hid/Kconfig +++ b/drivers/hid/intel-thc-hid/Kconfig @@ -7,6 +7,7 @@ menu "Intel THC HID Support" config INTEL_THC_HID tristate "Intel Touch Host Controller" depends on ACPI + select SGL_ALLOC help THC (Touch Host Controller) is the name of the IP block in PCH that interfaces with Touch Devices (ex: touchscreen, touchpad etc.). It From a9a917998d172ec117f9e9de1919174153c0ace4 Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 26 Dec 2025 11:39:53 +0800 Subject: [PATCH 215/283] HID: Intel-thc-hid: Intel-thc: Add safety check for reading DMA buffer Add DMA buffer readiness check before reading DMA buffer to avoid unexpected NULL pointer accessing. Signed-off-by: Even Xu Tested-by: Rui Zhang Signed-off-by: Benjamin Tissoires --- drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.c b/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.c index a0c368aa7979..6ee675e0a738 100644 --- a/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.c +++ b/drivers/hid/intel-thc-hid/intel-thc/intel-thc-dma.c @@ -575,6 +575,11 @@ static int read_dma_buffer(struct thc_device *dev, return -EINVAL; } + if (!read_config->prd_tbls || !read_config->sgls[prd_table_index]) { + dev_err_once(dev->dev, "PRD tables are not ready yet\n"); + return -EINVAL; + } + prd_tbl = &read_config->prd_tbls[prd_table_index]; mes_len = calc_message_len(prd_tbl, &nent); if (mes_len > read_config->max_packet_size) { From c06bc3557542307b9658fbd43cc946a14250347b Mon Sep 17 00:00:00 2001 From: Chris Chiu Date: Fri, 2 Jan 2026 06:56:43 +0000 Subject: [PATCH 216/283] HID: quirks: Add another Chicony HP 5MP Cameras to hid_ignore_list Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882 reports a HID sensor interface that is not actually implemented. Add the device to the HID ignore list so the bogus sensor is never exposed to userspace. Then the system won't hang when runtime PM tries to wake the unresponsive device. Signed-off-by: Chris Chiu Signed-off-by: Benjamin Tissoires --- drivers/hid/hid-ids.h | 1 + drivers/hid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index d31711f1aaec..e8a1a86313b7 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -317,6 +317,7 @@ #define USB_DEVICE_ID_CHICONY_ACER_SWITCH12 0x1421 #define USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA 0xb824 #define USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA2 0xb82c +#define USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA3 0xb882 #define USB_VENDOR_ID_CHUNGHWAT 0x2247 #define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH 0x0001 diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index c89a015686c0..3cf7971d4974 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -769,6 +769,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA) }, { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA2) }, + { HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA3) }, { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) }, { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI4713) }, From 2b29a90131bbb3d404e5bf5102af5ce98ccf96fe Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Mon, 22 Dec 2025 09:43:34 +1000 Subject: [PATCH 217/283] HID: multitouch: set INPUT_PROP_PRESSUREPAD based on Digitizer/Button Type A Digitizer/Button Type value of 1 indicates the device is a pressurepad, see https://learn.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report Signed-off-by: Peter Hutterer Signed-off-by: Benjamin Tissoires --- drivers/hid/hid-multitouch.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index a0c1ad5acb67..b1c3ef129058 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -81,6 +81,7 @@ MODULE_LICENSE("GPL"); #define MT_INPUTMODE_TOUCHPAD 0x03 #define MT_BUTTONTYPE_CLICKPAD 0 +#define MT_BUTTONTYPE_PRESSUREPAD 1 enum latency_mode { HID_LATENCY_NORMAL = 0, @@ -179,6 +180,7 @@ struct mt_device { __u8 inputmode_value; /* InputMode HID feature value */ __u8 maxcontacts; bool is_buttonpad; /* is this device a button pad? */ + bool is_pressurepad; /* is this device a pressurepad? */ bool is_haptic_touchpad; /* is this device a haptic touchpad? */ bool serial_maybe; /* need to check for serial protocol */ @@ -531,8 +533,14 @@ static void mt_feature_mapping(struct hid_device *hdev, } mt_get_feature(hdev, field->report); - if (field->value[usage->usage_index] == MT_BUTTONTYPE_CLICKPAD) + switch (field->value[usage->usage_index]) { + case MT_BUTTONTYPE_CLICKPAD: td->is_buttonpad = true; + break; + case MT_BUTTONTYPE_PRESSUREPAD: + td->is_pressurepad = true; + break; + } break; case 0xff0000c5: @@ -1394,6 +1402,8 @@ static int mt_touch_input_configured(struct hid_device *hdev, if (td->is_buttonpad) __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); + if (td->is_pressurepad) + __set_bit(INPUT_PROP_PRESSUREPAD, input->propbit); app->pending_palm_slots = devm_kcalloc(&hi->input->dev, BITS_TO_LONGS(td->maxcontacts), From 1d6628f7f279131ac9efb743bcea7080666d7574 Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Mon, 22 Dec 2025 09:43:35 +1000 Subject: [PATCH 218/283] selftests/hid: require hidtools 0.12 Not all our tests really require it but since it's likely pip-installed anyway it's trivial to require the new version, just in case we want to start cleaning up other bits. Signed-off-by: Peter Hutterer Signed-off-by: Benjamin Tissoires --- tools/testing/selftests/hid/tests/conftest.py | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/tools/testing/selftests/hid/tests/conftest.py b/tools/testing/selftests/hid/tests/conftest.py index 1361ec981db6..985a535324b2 100644 --- a/tools/testing/selftests/hid/tests/conftest.py +++ b/tools/testing/selftests/hid/tests/conftest.py @@ -5,6 +5,7 @@ # Copyright (c) 2017 Benjamin Tissoires # Copyright (c) 2017 Red Hat, Inc. +from packaging.version import Version import platform import pytest import re @@ -14,6 +15,19 @@ from .base import HIDTestUdevRule from pathlib import Path +@pytest.fixture(autouse=True) +def hidtools_version_check(): + HIDTOOLS_VERSION = "0.12" + try: + import hidtools + + version = hidtools.__version__ # type: ignore + if Version(version) < Version(HIDTOOLS_VERSION): + pytest.skip(reason=f"have hidtools {version}, require >={HIDTOOLS_VERSION}") + except Exception: + pytest.skip(reason=f"hidtools >={HIDTOOLS_VERSION} required") + + # See the comment in HIDTestUdevRule, this doesn't set up but it will clean # up once the last test exited. @pytest.fixture(autouse=True, scope="session") From 4f36fdab084fcbe9c34bb51889e4b8c06d98fbaa Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Mon, 22 Dec 2025 09:43:36 +1000 Subject: [PATCH 219/283] selftests/hid: use a enum class for the different button types Instead of multiple spellings of a string-provided argument, let's make this a tad more type-safe and use an enum here. And while we do this fix the two wrong devices: - elan_04f3_313a (HP ZBook Fury 15) is discrete button pad - dell_044e_1220 (Dell Precision 7740) is a discrete button pad Equivalent hid-tools commit https://gitlab.freedesktop.org/libevdev/hid-tools/-/commit/8300a55bf4213c6a252cab8cb5b34c9ddb191625 Signed-off-by: Peter Hutterer Signed-off-by: Benjamin Tissoires --- .../selftests/hid/tests/test_multitouch.py | 24 +++++++++++-------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/tools/testing/selftests/hid/tests/test_multitouch.py b/tools/testing/selftests/hid/tests/test_multitouch.py index ece0ba8e7d34..a06a087f00b6 100644 --- a/tools/testing/selftests/hid/tests/test_multitouch.py +++ b/tools/testing/selftests/hid/tests/test_multitouch.py @@ -9,6 +9,7 @@ from . import base from hidtools.hut import HUT from hidtools.util import BusType +import enum import libevdev import logging import pytest @@ -232,11 +233,17 @@ class Digitizer(base.UHIDTestDevice): return 0 +class HIDButtonType(enum.IntEnum): + CLICKPAD = 0 + PRESSUREPAD = 1 + DISCRETE_BUTTONS = 2 + + class PTP(Digitizer): def __init__( self, name, - type="Click Pad", + buttontype=HIDButtonType.CLICKPAD, rdesc_str=None, rdesc=None, application="Touch Pad", @@ -244,11 +251,8 @@ class PTP(Digitizer): max_contacts=None, input_info=None, ): - self.type = type.lower().replace(" ", "") - if self.type == "clickpad": - self.buttontype = 0 - else: # pressurepad - self.buttontype = 1 + self.buttontype = buttontype + self.clickpad_state = False self.left_state = False self.right_state = False @@ -983,7 +987,7 @@ class BaseTest: uhdev = self.uhdev evdev = uhdev.get_evdev() - if uhdev.type == "clickpad": + if uhdev.buttontype == HIDButtonType.CLICKPAD: r = uhdev.event(click=True) events = uhdev.next_sync_events() self.debug_reports(r, uhdev, events) @@ -1918,7 +1922,7 @@ class Testdell_044e_1220(BaseTest.TestPTP): def create_device(self): return PTP( "uhid test dell_044e_1220", - type="pressurepad", + buttontype=HIDButtonType.DISCRETE_BUTTONS, rdesc="05 01 09 02 a1 01 85 01 09 01 a1 00 05 09 19 01 29 03 15 00 25 01 75 01 95 03 81 02 95 05 81 01 05 01 09 30 09 31 15 81 25 7f 75 08 95 02 81 06 09 38 95 01 81 06 05 0c 0a 38 02 81 06 c0 c0 05 0d 09 05 a1 01 85 08 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 af 04 75 10 55 0e 65 11 09 30 35 00 46 e8 03 95 01 81 02 26 7b 02 46 12 02 09 31 81 02 c0 55 0c 66 01 10 47 ff ff 00 00 27 ff ff 00 00 75 10 95 01 05 0d 09 56 81 02 09 54 25 05 95 01 75 08 81 02 05 09 19 01 29 03 25 01 75 01 95 03 81 02 95 05 81 03 05 0d 85 09 09 55 75 08 95 01 25 05 b1 02 06 00 ff 85 0a 09 c5 15 00 26 ff 00 75 08 96 00 01 b1 02 c0 06 01 ff 09 01 a1 01 85 03 09 01 15 00 26 ff 00 95 1b 81 02 85 04 09 02 95 50 81 02 85 05 09 03 95 07 b1 02 85 06 09 04 81 02 c0 06 02 ff 09 01 a1 01 85 07 09 02 95 86 75 08 b1 02 c0 05 0d 09 0e a1 01 85 0b 09 22 a1 02 09 52 15 00 25 0a 75 08 95 01 b1 02 c0 09 22 a1 00 85 0c 09 57 09 58 75 01 95 02 25 01 b1 02 95 06 b1 03 c0 c0", ) @@ -2018,7 +2022,7 @@ class Testelan_04f3_313a(BaseTest.TestPTP): def create_device(self): return PTP( "uhid test elan_04f3_313a", - type="touchpad", + buttontype=HIDButtonType.DISCRETE_BUTTONS, input_info=(BusType.I2C, 0x04F3, 0x313A), rdesc="05 01 09 02 a1 01 85 01 09 01 a1 00 05 09 19 01 29 03 15 00 25 01 75 01 95 03 81 02 95 05 81 03 05 01 09 30 09 31 15 81 25 7f 75 08 95 02 81 06 75 08 95 05 81 03 c0 06 00 ff 09 01 85 0e 09 c5 15 00 26 ff 00 75 08 95 04 b1 02 85 0a 09 c6 15 00 26 ff 00 75 08 95 04 b1 02 c0 06 00 ff 09 01 a1 01 85 5c 09 01 95 0b 75 08 81 06 85 0d 09 c5 15 00 26 ff 00 75 08 95 04 b1 02 85 0c 09 c6 96 80 03 75 08 b1 02 85 0b 09 c7 95 82 75 08 b1 02 c0 05 0d 09 05 a1 01 85 04 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 05 09 09 02 09 03 15 00 25 01 75 01 95 02 81 02 05 0d 95 01 75 04 25 0f 09 51 81 02 05 01 15 00 26 d7 0e 75 10 55 0d 65 11 09 30 35 00 46 44 2f 95 01 81 02 46 12 16 26 eb 06 26 eb 06 09 31 81 02 05 0d 15 00 25 64 95 03 c0 55 0c 66 01 10 47 ff ff 00 00 27 ff ff 00 00 75 10 95 01 09 56 81 02 09 54 25 7f 95 01 75 08 81 02 25 01 75 01 95 08 81 03 09 c5 75 08 95 02 81 03 05 0d 85 02 09 55 09 59 75 04 95 02 25 0f b1 02 85 07 09 60 75 01 95 01 15 00 25 01 b1 02 95 0f b1 03 06 00 ff 06 00 ff 85 06 09 c5 15 00 26 ff 00 75 08 96 00 01 b1 02 c0 05 0d 09 0e a1 01 85 03 09 22 a1 00 09 52 15 00 25 0a 75 10 95 01 b1 02 c0 09 22 a1 00 85 05 09 57 09 58 75 01 95 02 25 01 b1 02 95 0e b1 03 c0 c0 05 01 09 02 a1 01 85 2a 09 01 a1 00 05 09 19 01 29 03 15 00 25 01 75 01 95 03 81 02 95 05 81 03 05 01 09 30 09 31 15 81 25 7f 35 81 45 7f 55 00 65 13 75 08 95 02 81 06 75 08 95 05 81 03 c0 c0", ) @@ -2110,7 +2114,7 @@ class Testsipodev_0603_0002(BaseTest.TestPTP): def create_device(self): return PTP( "uhid test sipodev_0603_0002", - type="clickpad", + buttontype=HIDButtonType.CLICKPAD, rdesc="05 01 09 02 a1 01 85 03 09 01 a1 00 05 09 19 01 29 02 25 01 75 01 95 02 81 02 95 06 81 03 05 01 09 30 09 31 15 80 25 7f 75 08 95 02 81 06 c0 c0 05 0d 09 05 a1 01 85 04 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 75 01 95 02 81 03 95 01 75 04 25 05 09 51 81 02 05 01 15 00 26 44 0a 75 0c 55 0e 65 11 09 30 35 00 46 ac 03 95 01 81 02 46 fe 01 26 34 05 75 0c 09 31 81 02 05 0d c0 55 0c 66 01 10 47 ff ff 00 00 27 ff ff 00 00 75 10 95 01 09 56 81 02 09 54 25 0a 95 01 75 04 81 02 75 01 95 03 81 03 05 09 09 01 25 01 75 01 95 01 81 02 05 0d 85 0a 09 55 09 59 75 04 95 02 25 0f b1 02 85 0b 09 60 75 01 95 01 15 00 25 01 b1 02 95 07 b1 03 85 09 06 00 ff 09 c5 15 00 26 ff 00 75 08 96 00 01 b1 02 c0 05 0d 09 0e a1 01 85 06 09 22 a1 02 09 52 15 00 25 0a 75 08 95 01 b1 02 c0 09 22 a1 00 85 07 09 57 09 58 75 01 95 02 25 01 b1 02 95 06 b1 03 c0 c0 05 01 09 0c a1 01 85 08 15 00 25 01 09 c6 75 01 95 01 81 06 75 07 81 03 c0 05 01 09 80 a1 01 85 01 15 00 25 01 75 01 0a 81 00 0a 82 00 0a 83 00 95 03 81 06 95 05 81 01 c0 06 0c 00 09 01 a1 01 85 02 25 01 15 00 75 01 0a b5 00 0a b6 00 0a b7 00 0a cd 00 0a e2 00 0a a2 00 0a e9 00 0a ea 00 95 08 81 02 0a 83 01 0a 6f 00 0a 70 00 0a 88 01 0a 8a 01 0a 92 01 0a a8 02 0a 24 02 95 08 81 02 0a 21 02 0a 23 02 0a 96 01 0a 25 02 0a 26 02 0a 27 02 0a 23 02 0a b1 02 95 08 81 02 c0 06 00 ff 09 01 a1 01 85 05 15 00 26 ff 00 19 01 29 02 75 08 95 05 b1 02 c0", ) From f287ba5951a4b3a47305b64a3fcde5d0911adb9b Mon Sep 17 00:00:00 2001 From: Peter Hutterer Date: Mon, 22 Dec 2025 09:43:37 +1000 Subject: [PATCH 220/283] selftests/hid: add a test for the Digitizer/Button Type pressurepad We have to resort to a bit of a hack: python-libevdev gets the properties from libevdev at module init time. If libevdev hasn't been rebuilt with the new property it won't be automatically populated. So we hack around this by constructing the property manually. Signed-off-by: Peter Hutterer Signed-off-by: Benjamin Tissoires --- .../selftests/hid/tests/test_multitouch.py | 39 +++++++++++++++++-- 1 file changed, 35 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/hid/tests/test_multitouch.py b/tools/testing/selftests/hid/tests/test_multitouch.py index a06a087f00b6..fa4fb2054bd4 100644 --- a/tools/testing/selftests/hid/tests/test_multitouch.py +++ b/tools/testing/selftests/hid/tests/test_multitouch.py @@ -979,15 +979,36 @@ class BaseTest: assert libevdev.InputEvent(libevdev.EV_ABS.ABS_MT_ORIENTATION, 90) in events class TestPTP(TestWin8Multitouch): + def test_buttontype(self): + """Check for the right ButtonType.""" + uhdev = self.uhdev + assert uhdev is not None + evdev = uhdev.get_evdev() + + # If libevdev.so is not yet compiled with INPUT_PROP_PRESSUREPAD + # python-libevdev won't have it either, let's fake it + if not getattr(libevdev, "INPUT_PROP_PRESSUREPAD", None): + prop = libevdev.InputProperty(name="INPUT_PROP_PRESSUREPAD", value=0x7) + libevdev.INPUT_PROP_PRESSUREPAD = prop + libevdev.props.append(prop) + + if uhdev.buttontype == HIDButtonType.CLICKPAD: + assert libevdev.INPUT_PROP_BUTTONPAD in evdev.properties + elif uhdev.buttontype == HIDButtonType.PRESSUREPAD: + assert libevdev.INPUT_PROP_PRESSUREPAD in evdev.properties + else: + assert libevdev.INPUT_PROP_PRESSUREPAD not in evdev.properties + assert libevdev.INPUT_PROP_BUTTONPAD not in evdev.properties + def test_ptp_buttons(self): """check for button reliability. - There are 2 types of touchpads: the click pads and the pressure pads. - Each should reliably report the BTN_LEFT events. + There are 3 types of touchpads: click pads + pressure pads and + those with discrete buttons. Each should reliably report the BTN_LEFT events. """ uhdev = self.uhdev evdev = uhdev.get_evdev() - if uhdev.buttontype == HIDButtonType.CLICKPAD: + if uhdev.buttontype in [HIDButtonType.CLICKPAD, HIDButtonType.PRESSUREPAD]: r = uhdev.event(click=True) events = uhdev.next_sync_events() self.debug_reports(r, uhdev, events) @@ -999,7 +1020,7 @@ class BaseTest: self.debug_reports(r, uhdev, events) assert libevdev.InputEvent(libevdev.EV_KEY.BTN_LEFT, 0) in events assert evdev.value[libevdev.EV_KEY.BTN_LEFT] == 0 - else: + elif uhdev.buttontype == HIDButtonType.DISCRETE_BUTTONS: r = uhdev.event(left=True) events = uhdev.next_sync_events() self.debug_reports(r, uhdev, events) @@ -2062,6 +2083,16 @@ class Testite_06cb_2968(BaseTest.TestPTP): ) +class Testven_0488_108c(BaseTest.TestPTP): + def create_device(self): + return PTP( + "uhid test ven_0488_108c", + rdesc="05 01 09 02 a1 01 85 06 09 01 a1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 03 05 01 09 30 09 31 09 38 15 81 25 7f 75 08 95 03 81 06 c0 c0 05 0d 09 05 a1 01 85 01 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 81 03 05 01 15 00 26 ba 0d 75 10 55 0e 65 11 09 30 35 00 46 d0 05 95 01 81 02 26 d0 06 46 bb 02 09 31 81 02 05 0d 95 01 75 10 26 ff 7f 46 ff 7f 09 30 81 02 c0 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 81 03 05 01 15 00 26 ba 0d 75 10 55 0e 65 11 09 30 35 00 46 d0 05 95 01 81 02 26 d0 06 46 bb 02 09 31 81 02 05 0d 95 01 75 10 26 ff 7f 46 ff 7f 09 30 81 02 c0 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 81 03 05 01 15 00 26 ba 0d 75 10 55 0e 65 11 09 30 35 00 46 d0 05 95 01 81 02 26 d0 06 46 bb 02 09 31 81 02 05 0d 95 01 75 10 26 ff 7f 46 ff 7f 09 30 81 02 c0 55 0c 66 01 10 47 ff ff 00 00 27 ff ff 00 00 75 10 95 01 05 0d 09 56 81 02 09 54 25 05 95 01 75 08 81 02 05 09 09 01 25 01 75 01 95 01 81 02 95 07 81 03 05 0d 85 02 09 55 75 08 95 01 25 05 b1 02 09 59 b1 02 06 00 ff 85 03 09 c5 15 00 26 ff 00 75 08 96 00 01 b1 02 05 0e 09 01 a1 02 85 13 09 23 15 00 25 64 75 08 95 01 b1 02 c0 c0 05 0d 09 0e a1 01 85 04 09 22 a1 02 09 52 15 00 25 0a 75 08 95 01 b1 02 c0 09 22 a1 00 85 05 09 57 09 58 75 01 95 02 25 01 b1 02 95 06 b1 03 c0 c0 06 01 ff 09 02 a1 01 09 00 85 07 15 00 26 ff 00 75 08 96 12 02 b1 02 c0 06 00 ff 09 01 a1 01 85 0d 15 00 26 ff 00 75 08 95 11 09 01 81 02 09 01 91 02 c0 05 0e 09 01 a1 01 85 11 09 35 15 00 26 ff 00 75 08 95 17 b1 02 c0 06 81 ff 09 01 a1 01 09 20 85 17 15 00 26 ff 00 75 08 95 3f 09 01 81 02 09 01 91 02 c0", + input_info=(0x18, 0x0488, 0x108C), + buttontype=HIDButtonType.PRESSUREPAD, + ) + + class Testn_trig_1b96_0c01(BaseTest.TestWin8Multitouch): def create_device(self): return Digitizer( From 2704024d83fa9eb8e5f16925aae340fd9d246694 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 7 Jan 2026 19:41:43 +0900 Subject: [PATCH 221/283] loop: add missing bd_abort_claiming in loop_set_status Commit 08e136ebd193 ("loop: don't change loop device under exclusive opener in loop_set_status") forgot to call bd_abort_claiming() when mutex_lock_killable() failed. Fixes: 08e136ebd193 ("loop: don't change loop device under exclusive opener in loop_set_status") Signed-off-by: Tetsuo Handa Signed-off-by: Jens Axboe --- drivers/block/loop.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index ca74cc31bf07..bd59c0e9508b 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1245,7 +1245,8 @@ loop_set_status(struct loop_device *lo, blk_mode_t mode, err = mutex_lock_killable(&lo->lo_mutex); if (err) - return err; + goto out_abort_claiming; + if (lo->lo_state != Lo_bound) { err = -ENXIO; goto out_unlock; @@ -1284,6 +1285,7 @@ out_unfreeze: } out_unlock: mutex_unlock(&lo->lo_mutex); +out_abort_claiming: if (!(mode & BLK_OPEN_EXCL)) bd_abort_claiming(bdev, loop_set_status); out_reread_partitions: From 9670db22e7ab4aefe2b2619589a47fef9d3e0c7e Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 6 Jan 2026 16:56:07 +0100 Subject: [PATCH 222/283] blk-mq: avoid stall during boot due to synchronize_rcu_expedited On the kernel 6.19-rc, I am experiencing 15-second boot stall in a virtual machine when probing a virtio-scsi disk: [ 1.011641] SCSI subsystem initialized [ 1.013972] virtio_scsi virtio6: 16/0/0 default/read/poll queues [ 1.015983] scsi host0: Virtio SCSI HBA [ 1.019578] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.020225] ahci 0000:00:1f.2: AHCI vers 0001.0000, 32 command slots, 1.5 Gbps, SATA mode [ 1.020228] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 1.020230] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.024688] scsi host1: ahci [ 1.025432] scsi host2: ahci [ 1.025966] scsi host3: ahci [ 1.026511] scsi host4: ahci [ 1.028371] scsi host5: ahci [ 1.028918] scsi host6: ahci [ 1.029266] ata1: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23100 irq 16 lpm-pol 1 [ 1.029305] ata2: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23180 irq 16 lpm-pol 1 [ 1.029316] ata3: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23200 irq 16 lpm-pol 1 [ 1.029327] ata4: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23280 irq 16 lpm-pol 1 [ 1.029341] ata5: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23300 irq 16 lpm-pol 1 [ 1.029356] ata6: SATA max UDMA/133 abar m4096@0xfea23000 port 0xfea23380 irq 16 lpm-pol 1 [ 1.118111] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 1.348916] ata1: SATA link down (SStatus 0 SControl 300) [ 1.350713] ata2: SATA link down (SStatus 0 SControl 300) [ 1.351025] ata6: SATA link down (SStatus 0 SControl 300) [ 1.351160] ata5: SATA link down (SStatus 0 SControl 300) [ 1.351326] ata3: SATA link down (SStatus 0 SControl 300) [ 1.351536] ata4: SATA link down (SStatus 0 SControl 300) [ 1.449153] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 16.483477] sd 0:0:0:0: Power-on or device reset occurred [ 16.483691] sd 0:0:0:0: [sda] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB) [ 16.483762] sd 0:0:0:0: [sda] Write Protect is off [ 16.483877] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.569225] sd 0:0:0:0: [sda] Attached SCSI disk I bisected it and it is caused by the commit 89e1fb7ceffd which introduces calls to synchronize_rcu_expedited. This commit replaces synchronize_rcu_expedited and kfree with a call to kfree_rcu_mightsleep, avoiding the 15-second delay. Signed-off-by: Mikulas Patocka Fixes: 89e1fb7ceffd ("blk-mq: fix potential uaf for 'queue_hw_ctx'") Reviewed-by: Uladzislau Rezki (Sony) Signed-off-by: Jens Axboe --- block/blk-mq.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index eff4f72ce83b..a29d8ac9d3e3 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -4553,8 +4553,7 @@ static void __blk_mq_realloc_hw_ctxs(struct blk_mq_tag_set *set, * Make sure reading the old queue_hw_ctx from other * context concurrently won't trigger uaf. */ - synchronize_rcu_expedited(); - kfree(hctxs); + kfree_rcu_mightsleep(hctxs); hctxs = new_hctxs; } From 6efe5322f060099c8bc51aaee83b857394e42dd5 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 23 Dec 2025 15:27:27 +0100 Subject: [PATCH 223/283] Documentation/process: maintainer-soc: Be more explicit about defconfig It is already documented but people still send noticeable amount of patches ignoring the rule - get_maintainers.pl does not work on arm64/configs/defconfig or any other shared ARM defconfig. Be more explicit, that one must not rely on typical/simple approach here for getting To/Cc list. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20251223142726.73417-3-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Arnd Bergmann --- Documentation/process/maintainer-soc.rst | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/process/maintainer-soc.rst b/Documentation/process/maintainer-soc.rst index 3ba886f52a51..014c639022b2 100644 --- a/Documentation/process/maintainer-soc.rst +++ b/Documentation/process/maintainer-soc.rst @@ -57,8 +57,10 @@ Submitting Patches for Given SoC All typical platform related patches should be sent via SoC submaintainers (platform-specific maintainers). This includes also changes to per-platform or -shared defconfigs (scripts/get_maintainer.pl might not provide correct -addresses in such case). +shared defconfigs. Note that scripts/get_maintainer.pl might not provide +correct addresses for the shared defconfig, so ignore its output and manually +create CC-list based on MAINTAINERS file or use something like +``scripts/get_maintainer.pl -f drivers/soc/FOO/``). Submitting Patches to the Main SoC Maintainers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ From 51183d3ff553e6bd101034e4c20bd20029316eba Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 23 Dec 2025 15:27:28 +0100 Subject: [PATCH 224/283] Documentation/process: maintainer-soc: Mark 'make' as commands Improve readability of the docs by marking 'make dtbs/dtbs_check' as shell commands. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20251223142726.73417-4-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Arnd Bergmann --- Documentation/process/maintainer-soc.rst | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/process/maintainer-soc.rst b/Documentation/process/maintainer-soc.rst index 014c639022b2..7d6bad989ad8 100644 --- a/Documentation/process/maintainer-soc.rst +++ b/Documentation/process/maintainer-soc.rst @@ -116,9 +116,9 @@ coordinating how the changes get merged through different maintainer trees. Usually the branch that includes a driver change will also include the corresponding change to the devicetree binding description, to ensure they are in fact compatible. This means that the devicetree branch can end up causing -warnings in the "make dtbs_check" step. If a devicetree change depends on +warnings in the ``make dtbs_check`` step. If a devicetree change depends on missing additions to a header file in include/dt-bindings/, it will fail the -"make dtbs" step and not get merged. +``make dtbs`` step and not get merged. There are multiple ways to deal with this: From bf104037ebd5c1774fa736050a484c1f28cb2e6b Mon Sep 17 00:00:00 2001 From: "Rob Herring (Arm)" Date: Mon, 5 Jan 2026 11:40:02 -0600 Subject: [PATCH 225/283] arm64: dts: hisilicon: hikey960: Drop "snps,gctl-reset-quirk" and "snps,tx_de_emphasis*" properties "snps,tx_de_emphasis" is supposed to be a u8, not a u32. Since it is big endian, 0 will be read rather than 1. The DWC3 Linux driver simply ORs the value if "snps,tx_de_emphasis_quirk" is set, so the 2 properties have no effect. (The driver doesn't clear the field either which is another problem). "snps,gctl-reset-quirk" is not documented nor used in the driver, so drop it as well. Signed-off-by: Rob Herring (Arm) Link: https://lore.kernel.org/r/20260105174002.2997615-1-robh@kernel.org Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index 3f13a960f34e..ed84ab92fb19 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -675,10 +675,7 @@ snps,lfps_filter_quirk; snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk; - snps,tx_de_emphasis_quirk; - snps,tx_de_emphasis = <1>; snps,dis_enblslpm_quirk; - snps,gctl-reset-quirk; usb-role-switch; role-switch-default-mode = "host"; port { From 2497ff38c530b1af0df5130ca9f5ab22c5e92f29 Mon Sep 17 00:00:00 2001 From: Kwok Kin Ming Date: Thu, 1 Jan 2026 02:18:26 +0800 Subject: [PATCH 226/283] HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report() `i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data into `ihid->rawbuf`. The former can come from the userspace in the hidraw driver and is only bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set `max_buffer_size` field of `struct hid_ll_driver` which we do not). The latter has size determined at runtime by the maximum size of different report types you could receive on any particular device and can be a much smaller value. Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`. The impact is low since access to hidraw devices requires root. Signed-off-by: Kwok Kin Ming Signed-off-by: Benjamin Tissoires --- drivers/hid/i2c-hid/i2c-hid-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c index 63f46a2e5788..5a183af3d5c6 100644 --- a/drivers/hid/i2c-hid/i2c-hid-core.c +++ b/drivers/hid/i2c-hid/i2c-hid-core.c @@ -286,6 +286,7 @@ static int i2c_hid_get_report(struct i2c_hid *ihid, * In addition to report data device will supply data length * in the first 2 bytes of the response, so adjust . */ + recv_len = min(recv_len, ihid->bufsize - sizeof(__le16)); error = i2c_hid_xfer(ihid, ihid->cmdbuf, length, ihid->rawbuf, recv_len + sizeof(__le16)); if (error) { From 003c03a4b40085784d5b661133d1124f7e587e02 Mon Sep 17 00:00:00 2001 From: Lukas Bulwahn Date: Wed, 7 Jan 2026 10:24:25 +0100 Subject: [PATCH 227/283] riscv: configs: Clean up references to non-existing configs - Drop 'CONFIG_I2C_COMPAT is not set' (removed in commit 7e722083fcc3 ("i2c: Remove I2C_COMPAT config symbol and related code")) - Drop 'CONFIG_SCHED_DEBUG is not set' (removed in commit b52173065e0a ("sched/debug: Remove CONFIG_SCHED_DEBUG")) Signed-off-by: Lukas Bulwahn Link: https://patch.msgid.link/20260107092425.24737-1-lukas.bulwahn@redhat.com Signed-off-by: Paul Walmsley --- arch/riscv/configs/nommu_k210_defconfig | 2 -- arch/riscv/configs/nommu_k210_sdcard_defconfig | 1 - arch/riscv/configs/nommu_virt_defconfig | 1 - 3 files changed, 4 deletions(-) diff --git a/arch/riscv/configs/nommu_k210_defconfig b/arch/riscv/configs/nommu_k210_defconfig index ee18d1e333f2..544c52067dc2 100644 --- a/arch/riscv/configs/nommu_k210_defconfig +++ b/arch/riscv/configs/nommu_k210_defconfig @@ -55,7 +55,6 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_HW_RANDOM is not set # CONFIG_DEVMEM is not set CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y # CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_DESIGNWARE_CORE=y @@ -89,7 +88,6 @@ CONFIG_PRINTK_TIME=y # CONFIG_FRAME_POINTER is not set # CONFIG_DEBUG_MISC is not set CONFIG_PANIC_ON_OOPS=y -# CONFIG_SCHED_DEBUG is not set # CONFIG_RCU_TRACE is not set # CONFIG_FTRACE is not set # CONFIG_RUNTIME_TESTING_MENU is not set diff --git a/arch/riscv/configs/nommu_k210_sdcard_defconfig b/arch/riscv/configs/nommu_k210_sdcard_defconfig index e770d81b738e..4a826e30fa3e 100644 --- a/arch/riscv/configs/nommu_k210_sdcard_defconfig +++ b/arch/riscv/configs/nommu_k210_sdcard_defconfig @@ -86,7 +86,6 @@ CONFIG_PRINTK_TIME=y # CONFIG_FRAME_POINTER is not set # CONFIG_DEBUG_MISC is not set CONFIG_PANIC_ON_OOPS=y -# CONFIG_SCHED_DEBUG is not set # CONFIG_RCU_TRACE is not set # CONFIG_FTRACE is not set # CONFIG_RUNTIME_TESTING_MENU is not set diff --git a/arch/riscv/configs/nommu_virt_defconfig b/arch/riscv/configs/nommu_virt_defconfig index 0da5069bfbef..4c38049633b7 100644 --- a/arch/riscv/configs/nommu_virt_defconfig +++ b/arch/riscv/configs/nommu_virt_defconfig @@ -66,7 +66,6 @@ CONFIG_EXT2_FS=y # CONFIG_MISC_FILESYSTEMS is not set CONFIG_LSM="[]" CONFIG_PRINTK_TIME=y -# CONFIG_SCHED_DEBUG is not set # CONFIG_RCU_TRACE is not set # CONFIG_FTRACE is not set # CONFIG_RUNTIME_TESTING_MENU is not set From 7cc3fe8e754eb1b7d9876c8ae2ee77dd2fb47b6d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 26 Dec 2025 12:05:31 +0100 Subject: [PATCH 228/283] tracing: Drop unneeded assignment to soft_mode soft_mode is not read in the enable case, so drop the assignment. Drop also the comment text that refers to the assignment and realign the comment. Cc: "Paul E . McKenney" Cc: Gabriele Paoloni Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Link: https://patch.msgid.link/20251226110531.4129794-1-Julia.Lawall@inria.fr Signed-off-by: Julia Lawall Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace_events.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 76067529db61..137b4d9bb116 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -826,16 +826,15 @@ static int __ftrace_event_enable_disable(struct trace_event_file *file, * When soft_disable is set and enable is set, we want to * register the tracepoint for the event, but leave the event * as is. That means, if the event was already enabled, we do - * nothing (but set soft_mode). If the event is disabled, we - * set SOFT_DISABLED before enabling the event tracepoint, so - * it still seems to be disabled. + * nothing. If the event is disabled, we set SOFT_DISABLED + * before enabling the event tracepoint, so it still seems + * to be disabled. */ if (!soft_disable) clear_bit(EVENT_FILE_FL_SOFT_DISABLED_BIT, &file->flags); else { if (atomic_inc_return(&file->sm_ref) > 1) break; - soft_mode = true; /* Enable use of trace_buffered_event */ trace_buffered_event_enable(); } From 6435ffd6c7fcba330dfa91c58dc30aed2df3d0bf Mon Sep 17 00:00:00 2001 From: Wupeng Ma Date: Sun, 28 Dec 2025 14:50:07 +0800 Subject: [PATCH 229/283] ring-buffer: Avoid softlockup in ring_buffer_resize() during memory free When user resize all trace ring buffer through file 'buffer_size_kb', then in ring_buffer_resize(), kernel allocates buffer pages for each cpu in a loop. If the kernel preemption model is PREEMPT_NONE and there are many cpus and there are many buffer pages to be freed, it may not give up cpu for a long time and finally cause a softlockup. To avoid it, call cond_resched() after each cpu buffer free as Commit f6bd2c92488c ("ring-buffer: Avoid softlockup in ring_buffer_resize()") does. Detailed call trace as follow: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 24-....: (14837 ticks this GP) idle=521c/1/0x4000000000000000 softirq=230597/230597 fqs=5329 rcu: (t=15004 jiffies g=26003221 q=211022 ncpus=96) CPU: 24 UID: 0 PID: 11253 Comm: bash Kdump: loaded Tainted: G EL 6.18.2+ #278 NONE pc : arch_local_irq_restore+0x8/0x20 arch_local_irq_restore+0x8/0x20 (P) free_frozen_page_commit+0x28c/0x3b0 __free_frozen_pages+0x1c0/0x678 ___free_pages+0xc0/0xe0 free_pages+0x3c/0x50 ring_buffer_resize.part.0+0x6a8/0x880 ring_buffer_resize+0x3c/0x58 __tracing_resize_ring_buffer.part.0+0x34/0xd8 tracing_resize_ring_buffer+0x8c/0xd0 tracing_entries_write+0x74/0xd8 vfs_write+0xcc/0x288 ksys_write+0x74/0x118 __arm64_sys_write+0x24/0x38 Cc: Link: https://patch.msgid.link/20251228065008.2396573-1-mawupeng1@huawei.com Signed-off-by: Wupeng Ma Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) --- kernel/trace/ring_buffer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 41c9f5d079be..630221b00838 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -3137,6 +3137,8 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size, list) { list_del_init(&bpage->list); free_buffer_page(bpage); + + cond_resched(); } } out_err_unlock: From 5232196ff49be08350b27f1ba8e1fad87afc9cdf Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 2 Jan 2026 14:31:48 -0500 Subject: [PATCH 230/283] ftrace: Make ftrace_graph_ent depth field signed The code has integrity checks to make sure that depth never goes below zero. But the depth field has recently been converted to unsigned long from "int" (for alignment reasons). As unsigned long can never be less than zero, the integrity checks no longer work. Convert depth to long from unsigned long to allow the integrity checks to work again. Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers Cc: pengdonglin Link: https://patch.msgid.link/20260102143148.251c2e16@gandalf.local.home Reported-by: Dan Carpenter Closes: https://lore.kernel.org/all/aS6kGi0maWBl-MjZ@stanley.mountain/ Fixes: f83ac7544fbf7 ("function_graph: Enable funcgraph-args and funcgraph-retaddr to work simultaneously") Signed-off-by: Steven Rostedt (Google) Acked-by: Masami Hiramatsu (Google) --- include/linux/ftrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index 770f0dc993cc..a3a8989e3268 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -1167,7 +1167,7 @@ static inline void ftrace_init(void) { } */ struct ftrace_graph_ent { unsigned long func; /* Current function */ - unsigned long depth; + long depth; /* signed to check for less than zero */ } __packed; /* From 5f1ef0dfcb5b7f4a91a9b0e0ba533efd9f7e2cdb Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 5 Jan 2026 20:31:41 -0500 Subject: [PATCH 231/283] tracing: Add recursion protection in kernel stack trace recording A bug was reported about an infinite recursion caused by tracing the rcu events with the kernel stack trace trigger enabled. The stack trace code called back into RCU which then called the stack trace again. Expand the ftrace recursion protection to add a set of bits to protect events from recursion. Each bit represents the context that the event is in (normal, softirq, interrupt and NMI). Have the stack trace code use the interrupt context to protect against recursion. Note, the bug showed an issue in both the RCU code as well as the tracing stacktrace code. This only handles the tracing stack trace side of the bug. The RCU fix will be handled separately. Link: https://lore.kernel.org/all/20260102122807.7025fc87@gandalf.local.home/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Joel Fernandes Cc: "Paul E. McKenney" Cc: Boqun Feng Link: https://patch.msgid.link/20260105203141.515cd49f@gandalf.local.home Reported-by: Yao Kai Tested-by: Yao Kai Fixes: 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()") Signed-off-by: Steven Rostedt (Google) --- include/linux/trace_recursion.h | 9 +++++++++ kernel/trace/trace.c | 6 ++++++ 2 files changed, 15 insertions(+) diff --git a/include/linux/trace_recursion.h b/include/linux/trace_recursion.h index ae04054a1be3..e6ca052b2a85 100644 --- a/include/linux/trace_recursion.h +++ b/include/linux/trace_recursion.h @@ -34,6 +34,13 @@ enum { TRACE_INTERNAL_SIRQ_BIT, TRACE_INTERNAL_TRANSITION_BIT, + /* Internal event use recursion bits */ + TRACE_INTERNAL_EVENT_BIT, + TRACE_INTERNAL_EVENT_NMI_BIT, + TRACE_INTERNAL_EVENT_IRQ_BIT, + TRACE_INTERNAL_EVENT_SIRQ_BIT, + TRACE_INTERNAL_EVENT_TRANSITION_BIT, + TRACE_BRANCH_BIT, /* * Abuse of the trace_recursion. @@ -58,6 +65,8 @@ enum { #define TRACE_LIST_START TRACE_INTERNAL_BIT +#define TRACE_EVENT_START TRACE_INTERNAL_EVENT_BIT + #define TRACE_CONTEXT_MASK ((1 << (TRACE_LIST_START + TRACE_CONTEXT_BITS)) - 1) /* diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 6f2148df14d9..aef9058537d5 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3012,6 +3012,11 @@ static void __ftrace_trace_stack(struct trace_array *tr, struct ftrace_stack *fstack; struct stack_entry *entry; int stackidx; + int bit; + + bit = trace_test_and_set_recursion(_THIS_IP_, _RET_IP_, TRACE_EVENT_START); + if (bit < 0) + return; /* * Add one, for this function and the call to save_stack_trace() @@ -3080,6 +3085,7 @@ static void __ftrace_trace_stack(struct trace_array *tr, /* Again, don't let gcc optimize things here */ barrier(); __this_cpu_dec(ftrace_stack_reserve); + trace_clear_recursion(bit); } static inline void ftrace_trace_stack(struct trace_array *tr, From 1e2ed4bfd50ace3c4272cfab7e9aa90956fb7ae0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 6 Jan 2026 23:10:54 +0000 Subject: [PATCH 232/283] trace: ftrace_dump_on_oops[] is not exported, make it static The ftrace_dump_on_oops string is not used outside of trace.c so make it static to avoid the export warning from sparse: kernel/trace/trace.c:141:6: warning: symbol 'ftrace_dump_on_oops' was not declared. Should it be static? Fixes: dd293df6395a2 ("tracing: Move trace sysctls into trace.c") Link: https://patch.msgid.link/20260106231054.84270-1-ben.dooks@codethink.co.uk Signed-off-by: Ben Dooks Signed-off-by: Steven Rostedt (Google) --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index aef9058537d5..baec63134ab6 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -138,7 +138,7 @@ cpumask_var_t __read_mostly tracing_buffer_mask; * by commas. */ /* Set to string format zero to disable by default */ -char ftrace_dump_on_oops[MAX_TRACER_SIZE] = "0"; +static char ftrace_dump_on_oops[MAX_TRACER_SIZE] = "0"; /* When set, tracing will stop when a WARN*() is hit */ static int __disable_trace_on_warning; From 2ca5bb54bde739b32ed42758fff8dc1025c1225f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 2 Jan 2026 14:58:39 +0000 Subject: [PATCH 233/283] riscv: cpu_ops_sbi: smp_processor_id() returns int, not unsigned int The print in sbi_cpu_stop() assumes smp_processor_id() returns an unsigned int, when it is actually an int. Fix the format string to avoid mismatch type warnings in rht pr_crit(). Signed-off-by: Ben Dooks Link: https://patch.msgid.link/20260102145839.657864-1-ben.dooks@codethink.co.uk Signed-off-by: Paul Walmsley --- arch/riscv/kernel/cpu_ops_sbi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c index 87d655944803..00aff669f5f2 100644 --- a/arch/riscv/kernel/cpu_ops_sbi.c +++ b/arch/riscv/kernel/cpu_ops_sbi.c @@ -85,7 +85,7 @@ static void sbi_cpu_stop(void) int ret; ret = sbi_hsm_hart_stop(); - pr_crit("Unable to stop the cpu %u (%d)\n", smp_processor_id(), ret); + pr_crit("Unable to stop the cpu %d (%d)\n", smp_processor_id(), ret); } static int sbi_cpu_is_stopped(unsigned int cpuid) From 957afeb99b111b672b3529a737fe19b95daaf1a2 Mon Sep 17 00:00:00 2001 From: Yunhui Cui Date: Tue, 16 Dec 2025 09:47:19 +0800 Subject: [PATCH 234/283] riscv: remove irqflags.h inclusion in asm/bitops.h The arch/riscv/include/asm/bitops.h does not functionally require including /linux/irqflags.h. Additionally, adding arch/riscv/include/asm/percpu.h causes a circular inclusion: kernel/bounds.c ->include/linux/log2.h ->include/linux/bitops.h ->arch/riscv/include/asm/bitops.h ->include/linux/irqflags.h ->include/linux/find.h ->return val ? __ffs(val) : size; ->arch/riscv/include/asm/bitops.h The compilation log is as follows: CC kernel/bounds.s In file included from ./include/linux/bitmap.h:11, from ./include/linux/cpumask.h:12, from ./arch/riscv/include/asm/processor.h:55, from ./arch/riscv/include/asm/thread_info.h:42, from ./include/linux/thread_info.h:60, from ./include/asm-generic/preempt.h:5, from ./arch/riscv/include/generated/asm/preempt.h:1, from ./include/linux/preempt.h:79, from ./arch/riscv/include/asm/percpu.h:8, from ./include/linux/irqflags.h:19, from ./arch/riscv/include/asm/bitops.h:14, from ./include/linux/bitops.h:68, from ./include/linux/log2.h:12, from kernel/bounds.c:13: ./include/linux/find.h: In function 'find_next_bit': ./include/linux/find.h:66:30: error: implicit declaration of function '__ffs' [-Wimplicit-function-declaration] 66 | return val ? __ffs(val) : size; | ^~~~~ Signed-off-by: Yunhui Cui Acked-by: Yury Norov (NVIDIA) Link: https://patch.msgid.link/20251216014721.42262-2-cuiyunhui@bytedance.com Signed-off-by: Paul Walmsley --- arch/riscv/include/asm/bitops.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/riscv/include/asm/bitops.h b/arch/riscv/include/asm/bitops.h index 238092125c11..3c1a15be54d8 100644 --- a/arch/riscv/include/asm/bitops.h +++ b/arch/riscv/include/asm/bitops.h @@ -11,7 +11,6 @@ #endif /* _LINUX_BITOPS_H */ #include -#include #include #include From bdb32359eab94013e80cf7e3d40a3fd4972da93a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Mon, 24 Nov 2025 19:04:11 +0200 Subject: [PATCH 235/283] sparc/PCI: Correct 64-bit non-pref -> pref BAR resources MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit SPARC T5-2 dts describes some PCI BARs as 64-bit resources without the pref(etchable) bit (0x83... vs 0xc3... in assigned-addresses) for address ranges above the 4G threshold. Such resources cannot be placed into a non-prefetchable PCI bridge window that is capable only of 32-bit addressing. As such, it looks like the platform is improperly described by the dts. The kernel detects this problem (see the IORESOURCE_PREFETCH check in pci_find_parent_resource()) and fails to assign these BAR resources to the resource tree due to lack of a compatible bridge window. Prior to 754babaaf333 ("sparc/PCI: Remove pcibios_enable_device() as they do nothing extra") SPARC arch code did not test whether device resources were successfully in the resource tree when enabling a device, effectively hiding the problem. After removing the arch-specific enable code, pci_enable_resources() refuses to enable the device when it finds not all mem resources are assigned, and therefore mpt3sas can't be enabled: pci 0001:04:00.0: reg 0x14: [mem 0x801110000000-0x80111000ffff 64bit] pci 0001:04:00.0: reg 0x1c: [mem 0x801110040000-0x80111007ffff 64bit] pci 0001:04:00.0: BAR 1 [mem 0x801110000000-0x80111000ffff 64bit]: can't claim; no compatible bridge window pci 0001:04:00.0: BAR 3 [mem 0x801110040000-0x80111007ffff 64bit]: can't claim; no compatible bridge window mpt3sas 0001:04:00.0: BAR 1 [mem size 0x00010000 64bit]: not assigned; can't enable device For clarity, this filtered log only shows failures for one mpt3sas device but other devices fail similarly. In the reported case, the end result with all the failures is an unbootable system. Things appeared to "work" before 754babaaf333 ("sparc/PCI: Remove pcibios_enable_device() as they do nothing extra") because the resource tree is agnostic to whether PCI BAR resources are properly in the tree or not. So as long as there was a parent resource (e.g. a root bus resource) that contains the address range, the resource tree code just places resource request underneath it without any consideration to the intermediate BAR resource. While it worked, it's incorrect setup still. Add an OF fixup to set the IORESOURCE_PREFETCH flag for a 64-bit PCI resource that has the end address above 4G requiring placement into the prefetchable window. Also log the issue. Fixes: 754babaaf333 ("sparc/PCI: Remove pcibios_enable_device() as they do nothing extra") Reported-by: Nathaniel Roach Closes: https://github.com/sparclinux/issues/issues/22 Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Tested-by: Nathaniel Roach Link: https://patch.msgid.link/20251124170411.3709-1-ilpo.jarvinen@linux.intel.com --- arch/sparc/kernel/pci.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index a9448088e762..b290107170e9 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -181,6 +181,28 @@ static int __init ofpci_debug(char *str) __setup("ofpci_debug=", ofpci_debug); +static void of_fixup_pci_pref(struct pci_dev *dev, int index, + struct resource *res) +{ + struct pci_bus_region region; + + if (!(res->flags & IORESOURCE_MEM_64)) + return; + + if (!resource_size(res)) + return; + + pcibios_resource_to_bus(dev->bus, ®ion, res); + if (region.end <= ~((u32)0)) + return; + + if (!(res->flags & IORESOURCE_PREFETCH)) { + res->flags |= IORESOURCE_PREFETCH; + pci_info(dev, "reg 0x%x: fixup: pref added to 64-bit resource\n", + index); + } +} + static unsigned long pci_parse_of_flags(u32 addr0) { unsigned long flags = 0; @@ -244,6 +266,7 @@ static void pci_parse_of_addrs(struct platform_device *op, res->end = op_res->end; res->flags = flags; res->name = pci_name(dev); + of_fixup_pci_pref(dev, i, res); pci_info(dev, "reg 0x%x: %pR\n", i, res); } From b0d7f5f0c9f05f1b6d4ee7110f15bef9c11f9df0 Mon Sep 17 00:00:00 2001 From: Martin Kaiser Date: Tue, 23 Dec 2025 14:50:06 +0100 Subject: [PATCH 236/283] riscv: trace: fix snapshot deadlock with sbi ecall If sbi_ecall.c's functions are traceable, echo "__sbi_ecall:snapshot" > /sys/kernel/tracing/set_ftrace_filter may get the kernel into a deadlock. (Functions in sbi_ecall.c are excluded from tracing if CONFIG_RISCV_ALTERNATIVE_EARLY is set.) __sbi_ecall triggers a snapshot of the ringbuffer. The snapshot code raises an IPI interrupt, which results in another call to __sbi_ecall and another snapshot... All it takes to get into this endless loop is one initial __sbi_ecall. On RISC-V systems without SSTC extension, the clock events in timer-riscv.c issue periodic sbi ecalls, making the problem easy to trigger. Always exclude the sbi_ecall.c functions from tracing to fix the potential deadlock. sbi ecalls can easiliy be logged via trace events, excluding ecall functions from function tracing is not a big limitation. Signed-off-by: Martin Kaiser Link: https://patch.msgid.link/20251223135043.1336524-1-martin@kaiser.cx Signed-off-by: Paul Walmsley --- arch/riscv/kernel/Makefile | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile index f60fce69b725..a01f6439d62b 100644 --- a/arch/riscv/kernel/Makefile +++ b/arch/riscv/kernel/Makefile @@ -3,12 +3,6 @@ # Makefile for the RISC-V Linux kernel # -ifdef CONFIG_FTRACE -CFLAGS_REMOVE_ftrace.o = $(CC_FLAGS_FTRACE) -CFLAGS_REMOVE_patch.o = $(CC_FLAGS_FTRACE) -CFLAGS_REMOVE_sbi.o = $(CC_FLAGS_FTRACE) -CFLAGS_REMOVE_return_address.o = $(CC_FLAGS_FTRACE) -endif CFLAGS_syscall_table.o += $(call cc-disable-warning, override-init) CFLAGS_compat_syscall_table.o += $(call cc-disable-warning, override-init) @@ -24,7 +18,6 @@ CFLAGS_sbi_ecall.o := -mcmodel=medany ifdef CONFIG_FTRACE CFLAGS_REMOVE_alternative.o = $(CC_FLAGS_FTRACE) CFLAGS_REMOVE_cpufeature.o = $(CC_FLAGS_FTRACE) -CFLAGS_REMOVE_sbi_ecall.o = $(CC_FLAGS_FTRACE) endif ifdef CONFIG_RELOCATABLE CFLAGS_alternative.o += -fno-pie @@ -43,6 +36,14 @@ CFLAGS_sbi_ecall.o += -D__NO_FORTIFY endif endif +ifdef CONFIG_FTRACE +CFLAGS_REMOVE_ftrace.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_patch.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_sbi.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_return_address.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_sbi_ecall.o = $(CC_FLAGS_FTRACE) +endif + always-$(KBUILD_BUILTIN) += vmlinux.lds obj-y += head.o From 0de604d0357d0d22cbf03af1077d174b641707b6 Mon Sep 17 00:00:00 2001 From: Perry Yuan Date: Thu, 25 Dec 2025 16:43:49 +0800 Subject: [PATCH 237/283] drm/amd/pm: Disable MMIO access during SMU Mode 1 reset During Mode 1 reset, the ASIC undergoes a reset cycle and becomes temporarily inaccessible via PCIe. Any attempt to access MMIO registers during this window (e.g., from interrupt handlers or other driver threads) can result in uncompleted PCIe transactions, leading to NMI panics or system hangs. To prevent this, set the `no_hw_access` flag to true immediately after triggering the reset. This signals other driver components to skip register accesses while the device is offline. A memory barrier `smp_mb()` is added to ensure the flag update is globally visible to all cores before the driver enters the sleep/wait state. Signed-off-by: Perry Yuan Reviewed-by: Yifan Zhang Signed-off-by: Alex Deucher (cherry picked from commit 7edb503fe4b6d67f47d8bb0dfafb8e699bb0f8a4) --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +++ drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 7 ++++++- drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c | 9 +++++++-- 3 files changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 12201b8e99b3..25f49be4d0bd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -5867,6 +5867,9 @@ int amdgpu_device_mode1_reset(struct amdgpu_device *adev) if (ret) goto mode1_reset_failed; + /* enable mmio access after mode 1 reset completed */ + adev->no_hw_access = false; + amdgpu_device_load_pci_state(adev->pdev); ret = amdgpu_psp_wait_for_bootloader(adev); if (ret) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c index 677781060246..eaeff6a9bc50 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c @@ -2923,8 +2923,13 @@ static int smu_v13_0_0_mode1_reset(struct smu_context *smu) break; } - if (!ret) + if (!ret) { + /* disable mmio access while doing mode 1 reset*/ + smu->adev->no_hw_access = true; + /* ensure no_hw_access is globally visible before any MMIO */ + smp_mb(); msleep(SMU13_MODE1_RESET_WAIT_TIME_IN_MS); + } return ret; } diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c index 2cea688c604f..33c3cd2e1e24 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_2_ppt.c @@ -2143,10 +2143,15 @@ static int smu_v14_0_2_mode1_reset(struct smu_context *smu) ret = smu_cmn_send_debug_smc_msg(smu, DEBUGSMC_MSG_Mode1Reset); if (!ret) { - if (amdgpu_emu_mode == 1) + if (amdgpu_emu_mode == 1) { msleep(50000); - else + } else { + /* disable mmio access while doing mode 1 reset*/ + smu->adev->no_hw_access = true; + /* ensure no_hw_access is globally visible before any MMIO */ + smp_mb(); msleep(1000); + } } return ret; From eb236fb911ca0f4243124d8a285ec0453a99a8b4 Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Mon, 8 Dec 2025 12:11:43 -0700 Subject: [PATCH 238/283] drm/amd/display: Check NULL before calling dac_load_detection dac_load_detection can be NULL in some scenario, so checking it before calling. Reviewed-by: Harry Wentland Signed-off-by: Alex Hung Signed-off-by: Chenyu Chen Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 179176134b535246f0b368b30e8ecad50066f896) --- drivers/gpu/drm/amd/display/dc/link/link_detection.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/link/link_detection.c b/drivers/gpu/drm/amd/display/dc/link/link_detection.c index 6d31f4967f1a..e1940b8e5bc3 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_detection.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_detection.c @@ -932,7 +932,7 @@ static bool link_detect_dac_load_detect(struct dc_link *link) struct link_encoder *link_enc = link->link_enc; enum engine_id engine_id = link_enc->preferred_engine; enum dal_device_type device_type = DEVICE_TYPE_CRT; - enum bp_result bp_result; + enum bp_result bp_result = BP_RESULT_UNSUPPORTED; uint32_t enum_id; switch (engine_id) { @@ -946,7 +946,9 @@ static bool link_detect_dac_load_detect(struct dc_link *link) break; } - bp_result = bios->funcs->dac_load_detection(bios, engine_id, device_type, enum_id); + if (bios->funcs->dac_load_detection) + bp_result = bios->funcs->dac_load_detection(bios, engine_id, device_type, enum_id); + return bp_result == BP_RESULT_OK; } From 6b2989ac5e8c496c1814d7961bee6f2d05382b3e Mon Sep 17 00:00:00 2001 From: "Mario Limonciello (AMD)" Date: Sat, 29 Nov 2025 19:46:31 -0600 Subject: [PATCH 239/283] Reapply "Revert "drm/amd: Skip power ungate during suspend for VPE"" Skipping power ungate exposed some scenarios that will fail like below: ``` amdgpu: Register(0) [regVPEC_QUEUE_RESET_REQ] failed to reach value 0x00000000 != 0x00000001n amdgpu 0000:c1:00.0: amdgpu: VPE queue reset failed ... amdgpu: [drm] *ERROR* wait_for_completion_timeout timeout! ``` The underlying s2idle issue that prompted this commit is going to be fixed in BIOS. This reverts commit 2a6c826cfeedd7714611ac115371a959ead55bda. This was lost in the 6.19 merge so reapply it. Fixes: 2a6c826cfeed ("drm/amd: Skip power ungate during suspend for VPE") Signed-off-by: Mario Limonciello (AMD) Acked-by: Alex Deucher Reported-by: Konstantin Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220812 Reported-by: Matthew Schwartz Signed-off-by: Alex Deucher (cherry picked from commit 3925683515e93844be204381d2d5a1df5de34f31) --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 25f49be4d0bd..d5c44bd34d45 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -3445,11 +3445,10 @@ int amdgpu_device_set_pg_state(struct amdgpu_device *adev, (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_GFX || adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_SDMA)) continue; - /* skip CG for VCE/UVD/VPE, it's handled specially */ + /* skip CG for VCE/UVD, it's handled specially */ if (adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_UVD && adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_VCE && adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_VCN && - adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_VPE && adev->ip_blocks[i].version->type != AMD_IP_BLOCK_TYPE_JPEG && adev->ip_blocks[i].version->funcs->set_powergating_state) { /* enable powergating to save power */ From 85a866809333cd2bf8ddac93d9a3e3ba8e4f807d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rodrigo=20Lugathe=20da=20Concei=C3=A7=C3=A3o=20Alves?= Date: Thu, 27 Nov 2025 19:03:57 -0300 Subject: [PATCH 240/283] HID: Apply quirk HID_QUIRK_ALWAYS_POLL to Edifier QR30 (2d99:a101) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The USB speaker has a bug that causes it to reboot when changing the brightness using the physical knob. Add a new vendor and product ID entry in hid-ids.h, and register the corresponding device in hid-quirks.c with the required quirk. Signed-off-by: Rodrigo Lugathe da Conceição Alves Reviewed-by: Terry Junge Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 3 +++ drivers/hid/hid-quirks.c | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e8a1a86313b7..10cb1bc717c1 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -439,6 +439,9 @@ #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_A001 0xa001 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_C002 0xc002 +#define USB_VENDOR_ID_EDIFIER 0x2d99 +#define USB_DEVICE_ID_EDIFIER_QR30 0xa101 /* EDIFIER Hal0 2.0 SE */ + #define USB_VENDOR_ID_ELAN 0x04f3 #define USB_DEVICE_ID_TOSHIBA_CLICK_L9W 0x0401 #define USB_DEVICE_ID_HP_X2 0x074d diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 3cf7971d4974..d6e42125d918 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -81,6 +81,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU), HID_QUIRK_MULTI_INPUT }, { HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER), HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET }, + { HID_USB_DEVICE(USB_VENDOR_ID_EDIFIER, USB_DEVICE_ID_EDIFIER_QR30), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_ELAN, HID_ANY_ID), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II), HID_QUIRK_MULTI_INPUT }, From c7fabe4ad9219866c203164a214c474c95b36bf2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ren=C3=A9=20Rebe?= Date: Fri, 28 Nov 2025 13:46:41 +0100 Subject: [PATCH 241/283] HID: quirks: work around VID/PID conflict for appledisplay MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit For years I wondered why the Apple Cinema Display driver would not just work for me. Turns out the hidraw driver instantly takes it over. Fix by adding appledisplay VID/PIDs to hid_have_special_driver. Fixes: 069e8a65cd79 ("Driver for Apple Cinema Display") Signed-off-by: René Rebe Signed-off-by: Jiri Kosina --- drivers/hid/hid-quirks.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index d6e42125d918..31b2a5d1cd98 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -233,6 +233,15 @@ static const struct hid_device_id hid_quirks[] = { * used as a driver. See hid_scan_report(). */ static const struct hid_device_id hid_have_special_driver[] = { +#if IS_ENABLED(CONFIG_APPLEDISPLAY) + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x9218) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x9219) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x921c) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x921d) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x9222) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x9226) }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, 0x9236) }, +#endif #if IS_ENABLED(CONFIG_HID_A4TECH) { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) }, { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) }, From 12adb969658ec39265eb8c7ea9e1856867fb9ceb Mon Sep 17 00:00:00 2001 From: Arnoud Willemsen Date: Sun, 7 Dec 2025 03:43:19 +0100 Subject: [PATCH 242/283] HID: Elecom: Add support for ELECOM M-XT3DRBK (018C) Wireless/new version of the Elecom trackball mouse M-XT3DRBK has a product id that differs from the existing M-XT3DRBK. The report descriptor format also seems to have changed and matches other (newer?) models instead (except for six buttons instead of eight). This patch follows the same format as the patch for the M-XT3URBK (018F) by Naoki Ueki (Nov 3rd 2025) to enable the sixth mouse button. dmesg output: [ 292.074664] usb 1-2: new full-speed USB device number 7 using xhci_hcd [ 292.218667] usb 1-2: New USB device found, idVendor=056e, idProduct=018c, bcdDevice= 1.00 [ 292.218676] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 292.218679] usb 1-2: Product: ELECOM TrackBall Mouse [ 292.218681] usb 1-2: Manufacturer: ELECOM usbhid-dump output: 001:006:000:DESCRIPTOR 1765072638.050578 05 01 09 02 A1 01 09 01 A1 00 85 01 05 09 19 01 29 05 15 00 25 01 95 08 75 01 81 02 95 01 75 00 81 01 05 01 09 30 09 31 16 00 80 26 FF 7F 75 10 95 02 81 06 C0 A1 00 05 01 09 38 15 81 25 7F 75 08 95 01 81 06 C0 A1 00 05 0C 0A 38 02 95 01 75 08 15 81 25 7F 81 06 C0 C0 06 01 FF 09 00 A1 01 85 02 09 00 15 00 26 FF 00 75 08 95 07 81 02 C0 05 0C 09 01 A1 01 85 05 15 00 26 3C 02 19 00 2A 3C 02 75 10 95 01 81 00 C0 05 01 09 80 A1 01 85 03 19 81 29 83 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 C0 06 BC FF 09 88 A1 01 85 04 95 01 75 08 15 00 26 FF 00 19 00 2A FF 00 81 00 C0 06 02 FF 09 02 A1 01 85 06 09 02 15 00 26 FF 00 75 08 95 07 B1 02 C0 Signed-off-by: Arnoud Willemsen Signed-off-by: Jiri Kosina --- drivers/hid/hid-elecom.c | 15 +++++++++++++-- drivers/hid/hid-ids.h | 3 ++- drivers/hid/hid-quirks.c | 3 ++- 3 files changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/hid/hid-elecom.c b/drivers/hid/hid-elecom.c index 981d1b6e9658..2003d2dcda7c 100644 --- a/drivers/hid/hid-elecom.c +++ b/drivers/hid/hid-elecom.c @@ -77,7 +77,7 @@ static const __u8 *elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc, break; case USB_DEVICE_ID_ELECOM_M_XT3URBK_00FB: case USB_DEVICE_ID_ELECOM_M_XT3URBK_018F: - case USB_DEVICE_ID_ELECOM_M_XT3DRBK: + case USB_DEVICE_ID_ELECOM_M_XT3DRBK_00FC: case USB_DEVICE_ID_ELECOM_M_XT4DRBK: /* * Report descriptor format: @@ -102,6 +102,16 @@ static const __u8 *elecom_report_fixup(struct hid_device *hdev, __u8 *rdesc, */ mouse_button_fixup(hdev, rdesc, *rsize, 12, 30, 14, 20, 8); break; + case USB_DEVICE_ID_ELECOM_M_XT3DRBK_018C: + /* + * Report descriptor format: + * 22: button bit count + * 30: padding bit count + * 24: button report size + * 16: button usage maximum + */ + mouse_button_fixup(hdev, rdesc, *rsize, 22, 30, 24, 16, 6); + break; case USB_DEVICE_ID_ELECOM_M_DT2DRBK: case USB_DEVICE_ID_ELECOM_M_HT1DRBK_011C: /* @@ -122,7 +132,8 @@ static const struct hid_device_id elecom_devices[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XGL20DLBK) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT3URBK_00FB) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT3URBK_018F) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT3DRBK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT3DRBK_00FC) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT3DRBK_018C) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT4DRBK) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_DT1URBK) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_DT1DRBK) }, diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 10cb1bc717c1..9c2bf584d9f6 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -455,7 +455,8 @@ #define USB_DEVICE_ID_ELECOM_M_XGL20DLBK 0x00e6 #define USB_DEVICE_ID_ELECOM_M_XT3URBK_00FB 0x00fb #define USB_DEVICE_ID_ELECOM_M_XT3URBK_018F 0x018f -#define USB_DEVICE_ID_ELECOM_M_XT3DRBK 0x00fc +#define USB_DEVICE_ID_ELECOM_M_XT3DRBK_00FC 0x00fc +#define USB_DEVICE_ID_ELECOM_M_XT3DRBK_018C 0x018c #define USB_DEVICE_ID_ELECOM_M_XT4DRBK 0x00fd #define USB_DEVICE_ID_ELECOM_M_DT1URBK 0x00fe #define USB_DEVICE_ID_ELECOM_M_DT1DRBK 0x00ff diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index 31b2a5d1cd98..11438039cdb7 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -422,7 +422,8 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XGL20DLBK) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT3URBK_00FB) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT3URBK_018F) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT3DRBK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT3DRBK_00FC) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT3DRBK_018C) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_XT4DRBK) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_DT1URBK) }, { HID_USB_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_M_DT1DRBK) }, From 6abcf751bc084804a9e5b3051442e8a2ce67f48a Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Mon, 5 Jan 2026 09:43:31 +0100 Subject: [PATCH 243/283] net: airoha: Fix schedule while atomic in airoha_ppe_deinit() airoha_ppe_deinit() runs airoha_npu_ppe_deinit() in atomic context. airoha_npu_ppe_deinit routine allocates ppe_data buffer with GFP_KERNEL flag. Rely on rcu_replace_pointer in airoha_ppe_deinit routine in order to fix schedule while atomic issue in airoha_npu_ppe_deinit() since we do not need atomic context there. Fixes: 00a7678310fe3 ("net: airoha: Introduce flowtable offload support") Signed-off-by: Lorenzo Bianconi Link: https://patch.msgid.link/20260105-airoha-fw-ethtool-v2-1-3b32b158cc31@kernel.org Signed-off-by: Paolo Abeni --- drivers/net/ethernet/airoha/airoha_ppe.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/airoha/airoha_ppe.c b/drivers/net/ethernet/airoha/airoha_ppe.c index 0caabb0c3aa0..2221bafaf7c9 100644 --- a/drivers/net/ethernet/airoha/airoha_ppe.c +++ b/drivers/net/ethernet/airoha/airoha_ppe.c @@ -1547,13 +1547,16 @@ void airoha_ppe_deinit(struct airoha_eth *eth) { struct airoha_npu *npu; - rcu_read_lock(); - npu = rcu_dereference(eth->npu); + mutex_lock(&flow_offload_mutex); + + npu = rcu_replace_pointer(eth->npu, NULL, + lockdep_is_held(&flow_offload_mutex)); if (npu) { npu->ops.ppe_deinit(npu); airoha_npu_put(npu); } - rcu_read_unlock(); + + mutex_unlock(&flow_offload_mutex); rhashtable_destroy(ð->ppe->l2_flows); rhashtable_destroy(ð->flow_table); From d7f6629bffdcb962d383ef8c9a30afef81e997fe Mon Sep 17 00:00:00 2001 From: Dennis Marttinen Date: Sun, 4 Jan 2026 13:00:51 +0000 Subject: [PATCH 244/283] HID: logitech: add HID++ support for Logitech MX Anywhere 3S I've acquired a Logitech MX Anywhere 3S mouse, which supports HID++ over Bluetooth. Adding its PID 0xb037 to the allowlist enables the additional features, such as high-resolution scrolling. Tested working across multiple machines, with a mix of Intel and Mediatek Bluetooth chips. [jkosina@suse.com: standardize shortlog] Signed-off-by: Dennis Marttinen Signed-off-by: Jiri Kosina --- drivers/hid/hid-logitech-hidpp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index d5011a5d0890..e871f1729d4b 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -4662,6 +4662,8 @@ static const struct hid_device_id hidpp_devices[] = { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb025) }, { /* MX Master 3S mouse over Bluetooth */ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb034) }, + { /* MX Anywhere 3S mouse over Bluetooth */ + HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb037) }, { /* MX Anywhere 3SB mouse over Bluetooth */ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_LOGITECH, 0xb038) }, {} From 21cbf883d073abbfe09e3924466aa5e0449e7261 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 8 Jan 2026 10:19:27 +0000 Subject: [PATCH 245/283] wifi: avoid kernel-infoleak from struct iw_point struct iw_point has a 32bit hole on 64bit arches. struct iw_point { void __user *pointer; /* Pointer to the data (in user space) */ __u16 length; /* number of fields or size in bytes */ __u16 flags; /* Optional params */ }; Make sure to zero the structure to avoid disclosing 32bits of kernel data to user space. Fixes: 87de87d5e47f ("wext: Dispatch and handle compat ioctls entirely in net/wireless/wext.c") Reported-by: syzbot+bfc7323743ca6dbcc3d3@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/695f83f3.050a0220.1c677c.0392.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260108101927.857582-1-edumazet@google.com Signed-off-by: Johannes Berg --- net/wireless/wext-core.c | 4 ++++ net/wireless/wext-priv.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c index c32a7c6903d5..7b8e94214b07 100644 --- a/net/wireless/wext-core.c +++ b/net/wireless/wext-core.c @@ -1101,6 +1101,10 @@ static int compat_standard_call(struct net_device *dev, return ioctl_standard_call(dev, iwr, cmd, info, handler); iwp_compat = (struct compat_iw_point *) &iwr->u.data; + + /* struct iw_point has a 32bit hole on 64bit arches. */ + memset(&iwp, 0, sizeof(iwp)); + iwp.pointer = compat_ptr(iwp_compat->pointer); iwp.length = iwp_compat->length; iwp.flags = iwp_compat->flags; diff --git a/net/wireless/wext-priv.c b/net/wireless/wext-priv.c index 674d426a9d24..37d1147019c2 100644 --- a/net/wireless/wext-priv.c +++ b/net/wireless/wext-priv.c @@ -228,6 +228,10 @@ int compat_private_call(struct net_device *dev, struct iwreq *iwr, struct iw_point iwp; iwp_compat = (struct compat_iw_point *) &iwr->u.data; + + /* struct iw_point has a 32bit hole on 64bit arches. */ + memset(&iwp, 0, sizeof(iwp)); + iwp.pointer = compat_ptr(iwp_compat->pointer); iwp.length = iwp_compat->length; iwp.flags = iwp_compat->flags; From 333418872bfecf4843f1ded7a4151685dfcf07d5 Mon Sep 17 00:00:00 2001 From: Benjamin Berg Date: Wed, 7 Jan 2026 14:36:51 +0100 Subject: [PATCH 246/283] wifi: mac80211_hwsim: fix typo in frequency notification The NAN notification is for 5745 MHz which corresponds to channel 149 and not 5475 which is not actually a valid channel. This could result in a NULL pointer dereference in cfg80211_next_nan_dw_notif. Fixes: a37a6f54439b ("wifi: mac80211_hwsim: Add simulation support for NAN device") Signed-off-by: Benjamin Berg Reviewed-by: Ilan Peer Reviewed-by: Miriam Rachel Korenblit Link: https://patch.msgid.link/20260107143652.7dab2035836f.Iacbaf7bb94ed5c14a0928a625827e4137d8bfede@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/virtual/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/virtual/mac80211_hwsim.c b/drivers/net/wireless/virtual/mac80211_hwsim.c index 551f5eb4e747..92427f527286 100644 --- a/drivers/net/wireless/virtual/mac80211_hwsim.c +++ b/drivers/net/wireless/virtual/mac80211_hwsim.c @@ -4040,7 +4040,7 @@ mac80211_hwsim_nan_dw_start(struct hrtimer *timer) ieee80211_vif_to_wdev(data->nan_device_vif); if (data->nan_curr_dw_band == NL80211_BAND_5GHZ) - ch = ieee80211_get_channel(hw->wiphy, 5475); + ch = ieee80211_get_channel(hw->wiphy, 5745); else ch = ieee80211_get_channel(hw->wiphy, 2437); From c0d82ba9612fb65a8394af639f1427dbe87fb788 Mon Sep 17 00:00:00 2001 From: Miri Korenblit Date: Wed, 7 Jan 2026 14:37:36 +0100 Subject: [PATCH 247/283] wifi: mac80211: don't iterate not running interfaces for_each_chanctx_user_* was introdcued as a replacement for for_each_sdata_link, which visits also other chanctx users that are not link. for_each_sdata_link skips not running interfaces, do the same for for_each_chanctx_user_* Fixes: 1ce954c98b89 ("wifi: mac80211: add and use chanctx usage iteration") Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20260107143736.55c084e2a976.I38b7b904a135dadca339321923b501b2c2c5c8c0@changeid Signed-off-by: Johannes Berg --- net/mac80211/chan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index d0bfb1216401..d8c5f11afc15 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -90,6 +90,9 @@ next_interface: /* next (or first) interface */ iter->sdata = list_prepare_entry(iter->sdata, &local->interfaces, list); list_for_each_entry_continue(iter->sdata, &local->interfaces, list) { + if (!ieee80211_sdata_running(iter->sdata)) + continue; + /* AP_VLAN has a chanctx pointer but follows AP */ if (iter->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) continue; From 6f385937160174b31a5e4105e759406f0b128494 Mon Sep 17 00:00:00 2001 From: Benjamin Berg Date: Wed, 7 Jan 2026 14:38:05 +0100 Subject: [PATCH 248/283] wifi: mac80211_hwsim: disable BHs for hwsim_radio_lock The hwsim_radio_lock spinlock expects bottom-half to be disabled, fix the call in mac80211_hwsim_nan_stop to ensure BHs are disabled. Signed-off-by: Benjamin Berg Link: https://patch.msgid.link/20260107143805.ce7406511608.I688f8b19346e94c1f8de0cdadde072054d4b861c@changeid Signed-off-by: Johannes Berg --- drivers/net/wireless/virtual/mac80211_hwsim.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/virtual/mac80211_hwsim.c b/drivers/net/wireless/virtual/mac80211_hwsim.c index 92427f527286..79cc63272134 100644 --- a/drivers/net/wireless/virtual/mac80211_hwsim.c +++ b/drivers/net/wireless/virtual/mac80211_hwsim.c @@ -4112,14 +4112,14 @@ static int mac80211_hwsim_stop_nan(struct ieee80211_hw *hw, hrtimer_cancel(&data->nan_timer); data->nan_device_vif = NULL; - spin_lock(&hwsim_radio_lock); + spin_lock_bh(&hwsim_radio_lock); list_for_each_entry(data2, &hwsim_radios, list) { if (data2->nan_device_vif) { nan_cluster_running = true; break; } } - spin_unlock(&hwsim_radio_lock); + spin_unlock_bh(&hwsim_radio_lock); if (!nan_cluster_running) memset(hwsim_nan_cluster_id, 0, ETH_ALEN); From d594cc6f2c588810888df70c83a9654b6bc7942d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 16 Dec 2025 11:52:42 +0100 Subject: [PATCH 249/283] wifi: mac80211: restore non-chanctx injection behaviour During the transition to use channel contexts throughout, the ability to do injection while in monitor mode concurrent with another interface was lost, since the (virtual) monitor won't have a chanctx assigned in this scenario. It's harder to fix drivers that actually transitioned to using channel contexts themselves, such as mt76, but it's easy to do those that are (still) just using the emulation. Do that. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=218763 Reported-and-tested-by: Oscar Alfonso Diaz Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") Link: https://patch.msgid.link/20251216105242.18366-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 9d8b0a25f73c..1b55e8340413 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2397,6 +2397,8 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, if (chanctx_conf) chandef = &chanctx_conf->def; + else if (local->emulate_chanctx) + chandef = &local->hw.conf.chandef; else goto fail_rcu; From a203dbeeca15a9b924f0d51f510921f4bae96801 Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Mon, 22 Dec 2025 10:29:07 +0800 Subject: [PATCH 250/283] wifi: mac80211: collect station statistics earlier when disconnect In __sta_info_destroy_part2(), station statistics are requested after the IEEE80211_STA_NONE -> IEEE80211_STA_NOTEXIST transition. This is problematic because the driver may be unable to handle the request due to the STA being in the NOTEXIST state (i.e. if the driver destroys the underlying data when transitioning to NOTEXIST). Move the statistics collection to before the state transition to avoid this issue. Signed-off-by: Baochen Qiang Link: https://patch.msgid.link/20251222-mac80211-move-station-stats-collection-earlier-v1-1-12cd4e42c633@oss.qualcomm.com Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index f4d3b67fda06..1a995bc301b1 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -1533,6 +1533,10 @@ static void __sta_info_destroy_part2(struct sta_info *sta, bool recalc) } } + sinfo = kzalloc(sizeof(*sinfo), GFP_KERNEL); + if (sinfo) + sta_set_sinfo(sta, sinfo, true); + if (sta->uploaded) { ret = drv_sta_state(local, sdata, sta, IEEE80211_STA_NONE, IEEE80211_STA_NOTEXIST); @@ -1541,9 +1545,6 @@ static void __sta_info_destroy_part2(struct sta_info *sta, bool recalc) sta_dbg(sdata, "Removed STA %pM\n", sta->sta.addr); - sinfo = kzalloc(sizeof(*sinfo), GFP_KERNEL); - if (sinfo) - sta_set_sinfo(sta, sinfo, true); cfg80211_del_sta_sinfo(sdata->dev, sta->sta.addr, sinfo, GFP_KERNEL); kfree(sinfo); From 36f597bba049928004a050c132ab787ba0eba524 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 8 Jan 2026 11:23:14 +0100 Subject: [PATCH 251/283] gpiolib: fix lookup table matching If on any iteration in gpiod_find(), gpio_desc_table_match() returns NULL (which is normal and expected), we never reinitialize desc back to ERR_PTR(-ENOENT) and if we don't find a match later on, we will return NULL causing a NULL-pointer dereference in users not expecting it. Don't initialize desc, but return ERR_PTR(-ENOENT) explicitly at the end of the function. Fixes: 9700b0fccf38 ("gpiolib: allow multiple lookup tables per consumer") Reported-by: Marek Szyprowski Closes: https://lore.kernel.org/all/00107523-7737-4b92-a785-14ce4e93b8cb@samsung.com/ Tested-by: Marek Szyprowski Link: https://lore.kernel.org/r/20260108102314.18816-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index c06152b16dbc..dcf427d3cf43 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -4602,8 +4602,8 @@ static struct gpio_desc *gpio_desc_table_match(struct device *dev, const char *c static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id, unsigned int idx, unsigned long *flags) { - struct gpio_desc *desc = ERR_PTR(-ENOENT); struct gpiod_lookup_table *table; + struct gpio_desc *desc; guard(mutex)(&gpio_lookup_lock); @@ -4619,7 +4619,7 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id, return desc; } - return desc; + return ERR_PTR(-ENOENT); } static int platform_gpio_count(struct device *dev, const char *con_id) From c1d73b1480235731e35c81df70b08f4714a7d095 Mon Sep 17 00:00:00 2001 From: Xiang Mei Date: Mon, 5 Jan 2026 20:41:00 -0700 Subject: [PATCH 252/283] net/sched: sch_qfq: Fix NULL deref when deactivating inactive aggregate in qfq_reset `qfq_class->leaf_qdisc->q.qlen > 0` does not imply that the class itself is active. Two qfq_class objects may point to the same leaf_qdisc. This happens when: 1. one QFQ qdisc is attached to the dev as the root qdisc, and 2. another QFQ qdisc is temporarily referenced (e.g., via qdisc_get() / qdisc_put()) and is pending to be destroyed, as in function tc_new_tfilter. When packets are enqueued through the root QFQ qdisc, the shared leaf_qdisc->q.qlen increases. At the same time, the second QFQ qdisc triggers qdisc_put and qdisc_destroy: the qdisc enters qfq_reset() with its own q->q.qlen == 0, but its class's leaf qdisc->q.qlen > 0. Therefore, the qfq_reset would wrongly deactivate an inactive aggregate and trigger a null-deref in qfq_deactivate_agg: [ 0.903172] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 0.903571] #PF: supervisor write access in kernel mode [ 0.903860] #PF: error_code(0x0002) - not-present page [ 0.904177] PGD 10299b067 P4D 10299b067 PUD 10299c067 PMD 0 [ 0.904502] Oops: Oops: 0002 [#1] SMP NOPTI [ 0.904737] CPU: 0 UID: 0 PID: 135 Comm: exploit Not tainted 6.19.0-rc3+ #2 NONE [ 0.905157] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 0.905754] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2)) [ 0.906046] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0 Code starting with the faulting instruction =========================================== 0: 0f 84 4d 01 00 00 je 0x153 6: 48 89 70 18 mov %rsi,0x18(%rax) a: 8b 4b 10 mov 0x10(%rbx),%ecx d: 48 c7 c2 ff ff ff ff mov $0xffffffffffffffff,%rdx 14: 48 8b 78 08 mov 0x8(%rax),%rdi 18: 48 d3 e2 shl %cl,%rdx 1b: 48 21 f2 and %rsi,%rdx 1e: 48 2b 13 sub (%rbx),%rdx 21: 48 8b 30 mov (%rax),%rsi 24: 48 d3 ea shr %cl,%rdx 27: 8b 4b 18 mov 0x18(%rbx),%ecx ... [ 0.907095] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246 [ 0.907368] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000 [ 0.907723] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.908100] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000 [ 0.908451] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000 [ 0.908804] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880 [ 0.909179] FS: 000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000 [ 0.909572] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.909857] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0 [ 0.910247] PKRU: 55555554 [ 0.910391] Call Trace: [ 0.910527] [ 0.910638] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1485) [ 0.910826] qdisc_reset (include/linux/skbuff.h:2195 include/linux/skbuff.h:2501 include/linux/skbuff.h:3424 include/linux/skbuff.h:3430 net/sched/sch_generic.c:1036) [ 0.911040] __qdisc_destroy (net/sched/sch_generic.c:1076) [ 0.911236] tc_new_tfilter (net/sched/cls_api.c:2447) [ 0.911447] rtnetlink_rcv_msg (net/core/rtnetlink.c:6958) [ 0.911663] ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:6861) [ 0.911894] netlink_rcv_skb (net/netlink/af_netlink.c:2550) [ 0.912100] netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) [ 0.912296] ? __alloc_skb (net/core/skbuff.c:706) [ 0.912484] netlink_sendmsg (net/netlink/af_netlink.c:1894) [ 0.912682] sock_write_iter (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1) net/socket.c:1195 (discriminator 1)) [ 0.912880] vfs_write (fs/read_write.c:593 fs/read_write.c:686) [ 0.913077] ksys_write (fs/read_write.c:738) [ 0.913252] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) [ 0.913438] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) [ 0.913687] RIP: 0033:0x424c34 [ 0.913844] Code: 89 02 48 c7 c0 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 80 3d 2d 44 09 00 00 74 13 b8 01 00 00 00 0f 05 9 Code starting with the faulting instruction =========================================== 0: 89 02 mov %eax,(%rdx) 2: 48 c7 c0 ff ff ff ff mov $0xffffffffffffffff,%rax 9: eb bd jmp 0xffffffffffffffc8 b: 66 2e 0f 1f 84 00 00 cs nopw 0x0(%rax,%rax,1) 12: 00 00 00 15: 90 nop 16: f3 0f 1e fa endbr64 1a: 80 3d 2d 44 09 00 00 cmpb $0x0,0x9442d(%rip) # 0x9444e 21: 74 13 je 0x36 23: b8 01 00 00 00 mov $0x1,%eax 28: 0f 05 syscall 2a: 09 .byte 0x9 [ 0.914807] RSP: 002b:00007ffea1938b78 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 0.915197] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 0000000000424c34 [ 0.915556] RDX: 000000000000003c RSI: 000000002af378c0 RDI: 0000000000000003 [ 0.915912] RBP: 00007ffea1938bc0 R08: 00000000004b8820 R09: 0000000000000000 [ 0.916297] R10: 0000000000000001 R11: 0000000000000202 R12: 00007ffea1938d28 [ 0.916652] R13: 00007ffea1938d38 R14: 00000000004b3828 R15: 0000000000000001 [ 0.917039] [ 0.917158] Modules linked in: [ 0.917316] CR2: 0000000000000000 [ 0.917484] ---[ end trace 0000000000000000 ]--- [ 0.917717] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:992 (discriminator 2) include/linux/list.h:1006 (discriminator 2) net/sched/sch_qfq.c:1367 (discriminator 2) net/sched/sch_qfq.c:1393 (discriminator 2)) [ 0.917978] Code: 0f 84 4d 01 00 00 48 89 70 18 8b 4b 10 48 c7 c2 ff ff ff ff 48 8b 78 08 48 d3 e2 48 21 f2 48 2b 13 48 8b 30 48 d3 ea 8b 4b 18 0 Code starting with the faulting instruction =========================================== 0: 0f 84 4d 01 00 00 je 0x153 6: 48 89 70 18 mov %rsi,0x18(%rax) a: 8b 4b 10 mov 0x10(%rbx),%ecx d: 48 c7 c2 ff ff ff ff mov $0xffffffffffffffff,%rdx 14: 48 8b 78 08 mov 0x8(%rax),%rdi 18: 48 d3 e2 shl %cl,%rdx 1b: 48 21 f2 and %rsi,%rdx 1e: 48 2b 13 sub (%rbx),%rdx 21: 48 8b 30 mov (%rax),%rsi 24: 48 d3 ea shr %cl,%rdx 27: 8b 4b 18 mov 0x18(%rbx),%ecx ... [ 0.918902] RSP: 0018:ffffc900004a39a0 EFLAGS: 00010246 [ 0.919198] RAX: ffff8881043a0880 RBX: ffff888102953340 RCX: 0000000000000000 [ 0.919559] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.919908] RBP: ffff888102952180 R08: 0000000000000000 R09: 0000000000000000 [ 0.920289] R10: ffff8881043a0000 R11: 0000000000000000 R12: ffff888102952000 [ 0.920648] R13: ffff888102952180 R14: ffff8881043a0ad8 R15: ffff8881043a0880 [ 0.921014] FS: 000000002a1a0380(0000) GS:ffff888196d8d000(0000) knlGS:0000000000000000 [ 0.921424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.921710] CR2: 0000000000000000 CR3: 0000000102993002 CR4: 0000000000772ef0 [ 0.922097] PKRU: 55555554 [ 0.922240] Kernel panic - not syncing: Fatal exception [ 0.922590] Kernel Offset: disabled Fixes: 0545a3037773 ("pkt_sched: QFQ - quick fair queue scheduler") Signed-off-by: Xiang Mei Link: https://patch.msgid.link/20260106034100.1780779-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski --- net/sched/sch_qfq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c index d920f57dc6d7..f4013b547438 100644 --- a/net/sched/sch_qfq.c +++ b/net/sched/sch_qfq.c @@ -1481,7 +1481,7 @@ static void qfq_reset_qdisc(struct Qdisc *sch) for (i = 0; i < q->clhash.hashsize; i++) { hlist_for_each_entry(cl, &q->clhash.hash[i], common.hnode) { - if (cl->qdisc->q.qlen > 0) + if (cl_is_active(cl)) qfq_deactivate_class(q, cl); qdisc_reset(cl->qdisc); From a4e305ed60f7c41bbf9aabc16dd75267194e0de3 Mon Sep 17 00:00:00 2001 From: Thomas Fourier Date: Tue, 6 Jan 2026 10:47:21 +0100 Subject: [PATCH 253/283] net: 3com: 3c59x: fix possible null dereference in vortex_probe1() pdev can be null and free_ring: can be called in 1297 with a null pdev. Fixes: 55c82617c3e8 ("3c59x: convert to generic DMA API") Cc: Signed-off-by: Thomas Fourier Link: https://patch.msgid.link/20260106094731.25819-2-fourier.thomas@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/3com/3c59x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c index 8c9cc97efd4e..4fe4efdb3737 100644 --- a/drivers/net/ethernet/3com/3c59x.c +++ b/drivers/net/ethernet/3com/3c59x.c @@ -1473,7 +1473,7 @@ static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq, return 0; free_ring: - dma_free_coherent(&pdev->dev, + dma_free_coherent(gendev, sizeof(struct boom_rx_desc) * RX_RING_SIZE + sizeof(struct boom_tx_desc) * TX_RING_SIZE, vp->rx_ring, vp->rx_ring_dma); From afa27621a28af317523e0836dad430bec551eb54 Mon Sep 17 00:00:00 2001 From: Petko Manolov Date: Tue, 6 Jan 2026 10:48:21 +0200 Subject: [PATCH 254/283] net: usb: pegasus: fix memory leak in update_eth_regs_async() When asynchronously writing to the device registers and if usb_submit_urb() fail, the code fail to release allocated to this point resources. Fixes: 323b34963d11 ("drivers: net: usb: pegasus: fix control urb submission") Signed-off-by: Petko Manolov Link: https://patch.msgid.link/20260106084821.3746677-1-petko.manolov@konsulko.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/pegasus.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index 81ca64debc5b..c514483134f0 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -168,6 +168,8 @@ static int update_eth_regs_async(pegasus_t *pegasus) netif_device_detach(pegasus->net); netif_err(pegasus, drv, pegasus->net, "%s returned %d\n", __func__, ret); + usb_free_urb(async_urb); + kfree(req); } return ret; } From 3358995b1a7f9dcb52a56ec8251570d71024dad0 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 6 Jan 2026 06:31:14 -0800 Subject: [PATCH 255/283] bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup When bnxt_init_one() fails during initialization (e.g., bnxt_init_int_mode returns -ENODEV), the error path calls bnxt_free_hwrm_resources() which destroys the DMA pool and sets bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called, which invokes ptp_clock_unregister(). Since commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable events"), ptp_clock_unregister() now calls ptp_disable_all_events(), which in turn invokes the driver's .enable() callback (bnxt_ptp_enable()) to disable PTP events before completing the unregistration. bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin() and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This function tries to allocate from bp->hwrm_dma_pool, causing a NULL pointer dereference: bnxt_en 0000:01:00.0 (unnamed net_device) (uninitialized): bnxt_init_int_mode err: ffffffed KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] Call Trace: __hwrm_req_init (drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c:72) bnxt_ptp_enable (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:323 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:517) ptp_disable_all_events (drivers/ptp/ptp_chardev.c:66) ptp_clock_unregister (drivers/ptp/ptp_clock.c:518) bnxt_ptp_clear (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:1134) bnxt_init_one (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16889) Lines are against commit f8f9c1f4d0c7 ("Linux 6.19-rc3") Fix this by clearing and unregistering ptp (bnxt_ptp_clear()) before freeing HWRM resources. Suggested-by: Pavan Chebbi Signed-off-by: Breno Leitao Fixes: a60fc3294a37 ("ptp: rework ptp_clock_unregister() to disable events") Cc: stable@vger.kernel.org Reviewed-by: Pavan Chebbi Link: https://patch.msgid.link/20260106-bnxt-v3-1-71f37e11446a@debian.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index d160e54ac121..8419d1eb4035 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -16891,12 +16891,12 @@ init_err_dl: init_err_pci_clean: bnxt_hwrm_func_drv_unrgtr(bp); - bnxt_free_hwrm_resources(bp); - bnxt_hwmon_uninit(bp); - bnxt_ethtool_free(bp); bnxt_ptp_clear(bp); kfree(bp->ptp_cfg); bp->ptp_cfg = NULL; + bnxt_free_hwrm_resources(bp); + bnxt_hwmon_uninit(bp); + bnxt_ethtool_free(bp); kfree(bp->fw_health); bp->fw_health = NULL; bnxt_cleanup_pci(bp); From 7d11e047eda5f98514ae62507065ac961981c025 Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Tue, 6 Jan 2026 10:05:46 -0500 Subject: [PATCH 256/283] net: do not write to msg_get_inq in callee NULL pointer dereference fix. msg_get_inq is an input field from caller to callee. Don't set it in the callee, as the caller may not clear it on struct reuse. This is a kernel-internal variant of msghdr only, and the only user does reinitialize the field. So this is not critical for that reason. But it is more robust to avoid the write, and slightly simpler code. And it fixes a bug, see below. Callers set msg_get_inq to request the input queue length to be returned in msg_inq. This is equivalent to but independent from the SO_INQ request to return that same info as a cmsg (tp->recvmsg_inq). To reduce branching in the hot path the second also sets the msg_inq. That is WAI. This is a fix to commit 4d1442979e4a ("af_unix: don't post cmsg for SO_INQ unless explicitly asked for"), which fixed the inverse. Also avoid NULL pointer dereference in unix_stream_read_generic if state->msg is NULL and msg->msg_get_inq is written. A NULL state->msg can happen when splicing as of commit 2b514574f7e8 ("net: af_unix: implement splice for stream af_unix sockets"). Also collapse two branches using a bitwise or. Cc: stable@vger.kernel.org Fixes: 4d1442979e4a ("af_unix: don't post cmsg for SO_INQ unless explicitly asked for") Link: https://lore.kernel.org/netdev/willemdebruijn.kernel.24d8030f7a3de@gmail.com/ Signed-off-by: Willem de Bruijn Reviewed-by: Jens Axboe Reviewed-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260106150626.3944363-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv4/tcp.c | 8 +++----- net/unix/af_unix.c | 8 +++----- 2 files changed, 6 insertions(+), 10 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index f035440c475a..d5319ebe2452 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2652,10 +2652,8 @@ static int tcp_recvmsg_locked(struct sock *sk, struct msghdr *msg, size_t len, if (sk->sk_state == TCP_LISTEN) goto out; - if (tp->recvmsg_inq) { + if (tp->recvmsg_inq) *cmsg_flags = TCP_CMSG_INQ; - msg->msg_get_inq = 1; - } timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT); /* Urgent data needs to be handled specially. */ @@ -2929,10 +2927,10 @@ int tcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len, int flags, ret = tcp_recvmsg_locked(sk, msg, len, flags, &tss, &cmsg_flags); release_sock(sk); - if ((cmsg_flags || msg->msg_get_inq) && ret >= 0) { + if ((cmsg_flags | msg->msg_get_inq) && ret >= 0) { if (cmsg_flags & TCP_CMSG_TS) tcp_recv_timestamp(msg, sk, &tss); - if (msg->msg_get_inq) { + if ((cmsg_flags & TCP_CMSG_INQ) | msg->msg_get_inq) { msg->msg_inq = tcp_inq_hint(sk); if (cmsg_flags & TCP_CMSG_INQ) put_cmsg(msg, SOL_TCP, TCP_CM_INQ, diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index a7ca74653d94..d0511225799b 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2904,7 +2904,6 @@ static int unix_stream_read_generic(struct unix_stream_read_state *state, unsigned int last_len; struct unix_sock *u; int copied = 0; - bool do_cmsg; int err = 0; long timeo; int target; @@ -2930,9 +2929,6 @@ static int unix_stream_read_generic(struct unix_stream_read_state *state, u = unix_sk(sk); - do_cmsg = READ_ONCE(u->recvmsg_inq); - if (do_cmsg) - msg->msg_get_inq = 1; redo: /* Lock the socket to prevent queue disordering * while sleeps in memcpy_tomsg @@ -3090,9 +3086,11 @@ unlock: mutex_unlock(&u->iolock); if (msg) { + bool do_cmsg = READ_ONCE(u->recvmsg_inq); + scm_recv_unix(sock, msg, &scm, flags); - if (msg->msg_get_inq && (copied ?: err) >= 0) { + if ((do_cmsg | msg->msg_get_inq) && (copied ?: err) >= 0) { msg->msg_inq = READ_ONCE(u->inq_len); if (do_cmsg) put_cmsg(msg, SOL_SOCKET, SCM_INQ, From 790792ebc9603a7ccbf6996cb537d89607e3a75b Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 6 Jan 2026 08:34:26 -0800 Subject: [PATCH 257/283] tools: ynl: don't install tests make's install target is meant for installing the production artifacts, AFAIU. Don't install test_ynl_cli and test_ynl_ethtool from under the main YNL install target. The install target under tests/ is retained in case someone wants the tests to be installed. Fixes: 308b7dee3e5c ("tools: ynl: add YNL test framework") Reviewed-by: Hangbin Liu Reviewed-by: Donald Hunter Link: https://patch.msgid.link/20260106163426.1468943-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- tools/net/ynl/Makefile | 1 - 1 file changed, 1 deletion(-) diff --git a/tools/net/ynl/Makefile b/tools/net/ynl/Makefile index 7736b492f559..c2f3e8b3f2ac 100644 --- a/tools/net/ynl/Makefile +++ b/tools/net/ynl/Makefile @@ -51,7 +51,6 @@ install: libynl.a lib/*.h @echo -e "\tINSTALL pyynl" @pip install --prefix=$(DESTDIR)$(prefix) . @make -C generated install - @make -C tests install run_tests: @$(MAKE) -C tests run_tests From 4d984b0574ff708e66152763fbfdef24ea40933f Mon Sep 17 00:00:00 2001 From: Thomas Fourier Date: Wed, 7 Jan 2026 10:01:36 +0100 Subject: [PATCH 258/283] atm: Fix dma_free_coherent() size The size of the buffer is not the same when alloc'd with dma_alloc_coherent() in he_init_tpdrq() and freed. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Signed-off-by: Thomas Fourier Link: https://patch.msgid.link/20260107090141.80900-2-fourier.thomas@gmail.com Signed-off-by: Jakub Kicinski --- drivers/atm/he.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/atm/he.c b/drivers/atm/he.c index ad91cc6a34fc..92a041d5387b 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -1587,7 +1587,8 @@ he_stop(struct he_dev *he_dev) he_dev->tbrq_base, he_dev->tbrq_phys); if (he_dev->tpdrq_base) - dma_free_coherent(&he_dev->pci_dev->dev, CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq), + dma_free_coherent(&he_dev->pci_dev->dev, + CONFIG_TPDRQ_SIZE * sizeof(struct he_tpdrq), he_dev->tpdrq_base, he_dev->tpdrq_phys); dma_pool_destroy(he_dev->tpd_pool); From 4b5bdabb5449b652122e43f507f73789041d4abe Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 7 Jan 2026 17:12:04 +0800 Subject: [PATCH 259/283] net: enetc: fix build warning when PAGE_SIZE is greater than 128K The max buffer size of ENETC RX BD is 0xFFFF bytes, so if the PAGE_SIZE is greater than 128K, ENETC_RXB_DMA_SIZE and ENETC_RXB_DMA_SIZE_XDP will be greater than 0xFFFF, thus causing a build warning. This will not cause any practical issues because ENETC is currently only used on the ARM64 platform, and the max PAGE_SIZE is 64K. So this patch is only for fixing the build warning that occurs when compiling ENETC drivers for other platforms. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202601050637.kHEKKOG7-lkp@intel.com/ Fixes: e59bc32df2e9 ("net: enetc: correct the value of ENETC_RXB_TRUESIZE") Signed-off-by: Wei Fang Reviewed-by: Frank Li Link: https://patch.msgid.link/20260107091204.1980222-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h index dce27bd67a7d..aecd40aeef9c 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.h +++ b/drivers/net/ethernet/freescale/enetc/enetc.h @@ -79,9 +79,9 @@ struct enetc_lso_t { #define ENETC_RXB_TRUESIZE (PAGE_SIZE >> 1) #define ENETC_RXB_PAD NET_SKB_PAD /* add extra space if needed */ #define ENETC_RXB_DMA_SIZE \ - (SKB_WITH_OVERHEAD(ENETC_RXB_TRUESIZE) - ENETC_RXB_PAD) + min(SKB_WITH_OVERHEAD(ENETC_RXB_TRUESIZE) - ENETC_RXB_PAD, 0xffff) #define ENETC_RXB_DMA_SIZE_XDP \ - (SKB_WITH_OVERHEAD(ENETC_RXB_TRUESIZE) - XDP_PACKET_HEADROOM) + min(SKB_WITH_OVERHEAD(ENETC_RXB_TRUESIZE) - XDP_PACKET_HEADROOM, 0xffff) struct enetc_rx_swbd { dma_addr_t dma; From c92510f5e3f82ba11c95991824a41e59a9c5ed81 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 7 Jan 2026 21:22:50 +0000 Subject: [PATCH 260/283] arp: do not assume dev_hard_header() does not change skb->head arp_create() is the only dev_hard_header() caller making assumption about skb->head being unchanged. A recent commit broke this assumption. Initialize @arp pointer after dev_hard_header() call. Fixes: db5b4e39c4e6 ("ip6_gre: make ip6gre_header() robust") Reported-by: syzbot+58b44a770a1585795351@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet Link: https://patch.msgid.link/20260107212250.384552-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv4/arp.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index 7f3863daaa40..c8c3e1713c0e 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -564,7 +564,7 @@ struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip, skb_reserve(skb, hlen); skb_reset_network_header(skb); - arp = skb_put(skb, arp_hdr_len(dev)); + skb_put(skb, arp_hdr_len(dev)); skb->dev = dev; skb->protocol = htons(ETH_P_ARP); if (!src_hw) @@ -572,12 +572,13 @@ struct sk_buff *arp_create(int type, int ptype, __be32 dest_ip, if (!dest_hw) dest_hw = dev->broadcast; - /* - * Fill the device header for the ARP frame + /* Fill the device header for the ARP frame. + * Note: skb->head can be changed. */ if (dev_hard_header(skb, dev, ptype, dest_hw, src_hw, skb->len) < 0) goto out; + arp = arp_hdr(skb); /* * Fill out the arp protocol part. * From c2803bd580db226008aabf2fb2f0c9a7d3b5d0de Mon Sep 17 00:00:00 2001 From: Ben Horgan Date: Fri, 19 Dec 2025 18:11:03 +0000 Subject: [PATCH 261/283] arm_mpam: Stop using uninitialized variables in __ris_msmon_read() Dan has reported two uses of uninitialized variables in __ris_msmon_read(). If an unknown monitor type is encountered then the local variable, now, is used uninitialized. Fix this by returning early on error. If a non-mbwu monitor is being read then the local variable, overflow, is not initialized but still read. Initialize it to false as overflow is not relevant for csu monitors. Fixes: 823e7c3712c5 ("arm_mpam: Add mpam_msmon_read() to read monitor value") Fixes: 9e5afb7c3283 ("arm_mpam: Use long MBWU counters if supported") Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202512091519.RBwiJcSq-lkp@intel.com/ Closes: https://lore.kernel.org/r/202512100547.N7QPYgfb-lkp@intel.com/ Signed-off-by: Ben Horgan Reviewed-by: Jonathan Cameron Signed-off-by: Catalin Marinas --- drivers/resctrl/mpam_devices.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c index 0b5b158e1aaf..b495d5291868 100644 --- a/drivers/resctrl/mpam_devices.c +++ b/drivers/resctrl/mpam_devices.c @@ -1072,7 +1072,7 @@ static void __ris_msmon_read(void *arg) u64 now; bool nrdy = false; bool config_mismatch; - bool overflow; + bool overflow = false; struct mon_read *m = arg; struct mon_cfg *ctx = m->ctx; bool reset_on_next_read = false; @@ -1176,10 +1176,11 @@ static void __ris_msmon_read(void *arg) } mpam_mon_sel_unlock(msc); - if (nrdy) { + if (nrdy) m->err = -EBUSY; + + if (m->err) return; - } *m->val += now; } From fcff71fd888dce1533a3975e68fc80824ff69ef9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= Date: Fri, 2 Jan 2026 08:32:03 +0100 Subject: [PATCH 262/283] lib/crypto: tests: polyval_kunit: Increase iterations for preparekey in IRQs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On my development machine the generic, memcpy()-only implementation of polyval_preparekey() is too fast for the IRQ workers to actually fire. The test fails. Increase the iterations to make the test more robust. The test will run for a maximum of one second in any case. [EB: This failure was already fixed by commit c31f4aa8fed0 ("kunit: Enforce task execution in {soft,hard}irq contexts"). I'm still applying this patch too, since the iteration count in this test made its running time much shorter than the other similar ones.] Fixes: b3aed551b3fc ("lib/crypto: tests: Add KUnit tests for POLYVAL") Signed-off-by: Thomas Weißschuh Link: https://lore.kernel.org/r/20260102-kunit-polyval-fix-v1-1-5313b5a65f35@linutronix.de Signed-off-by: Eric Biggers --- lib/crypto/tests/polyval_kunit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/crypto/tests/polyval_kunit.c b/lib/crypto/tests/polyval_kunit.c index e59f598c1572..f47f41a39a41 100644 --- a/lib/crypto/tests/polyval_kunit.c +++ b/lib/crypto/tests/polyval_kunit.c @@ -183,7 +183,7 @@ static void test_polyval_preparekey_in_irqs(struct kunit *test) rand_bytes(state.raw_key, sizeof(state.raw_key)); polyval_preparekey(&state.expected_key, state.raw_key); - kunit_run_irq_test(test, polyval_irq_test_func, 20000, &state); + kunit_run_irq_test(test, polyval_irq_test_func, 200000, &state); } static int polyval_suite_init(struct kunit_suite *suite) From 0f42c2a52d8a7535088895c3104150ac9019afd8 Mon Sep 17 00:00:00 2001 From: Jie Zhan Date: Wed, 7 Jan 2026 09:58:29 +0800 Subject: [PATCH 263/283] lib/crypto: tests: Fix syntax error for old python versions 'make binrpm-pkg' throws me this error, with Python 3.9: *** Error compiling '.../gen-hash-testvecs.py'... File ".../scripts/crypto/gen-hash-testvecs.py", line 121 return f'{alg.upper().replace('-', '_')}_DIGEST_SIZE' ^ SyntaxError: f-string: unmatched '(' Old python versions, presumably <= 3.11, can't resolve these quotes. Fix it with double quotes for compatibility. Fixes: 15c64c47e484 ("lib/crypto: tests: Add SHA3 kunit tests") Signed-off-by: Jie Zhan Link: https://lore.kernel.org/r/20260107015829.2000699-1-zhanjie9@hisilicon.com Signed-off-by: Eric Biggers --- scripts/crypto/gen-hash-testvecs.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/crypto/gen-hash-testvecs.py b/scripts/crypto/gen-hash-testvecs.py index c1d0517140bd..c773294fba64 100755 --- a/scripts/crypto/gen-hash-testvecs.py +++ b/scripts/crypto/gen-hash-testvecs.py @@ -118,7 +118,7 @@ def print_c_struct_u8_array_field(name, value): def alg_digest_size_const(alg): if alg.startswith('blake2'): return f'{alg.upper()}_HASH_SIZE' - return f'{alg.upper().replace('-', '_')}_DIGEST_SIZE' + return f"{alg.upper().replace('-', '_')}_DIGEST_SIZE" def gen_unkeyed_testvecs(alg): print('') From 2eb57ca7cc373404aa1399a9d926dea8479eb728 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Tue, 6 Jan 2026 19:39:48 -0800 Subject: [PATCH 264/283] MAINTAINERS: add test vector generation scripts to "CRYPTO LIBRARY" The scripts in scripts/crypto/ are used to generate files in lib/crypto/, so they should be included in "CRYPTO LIBRARY". Acked-by: Ard Biesheuvel Link: https://lore.kernel.org/r/20260107033948.29368-1-ebiggers@kernel.org Signed-off-by: Eric Biggers --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 765ad2daa218..87d97df65959 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6705,6 +6705,7 @@ S: Maintained T: git https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git libcrypto-next T: git https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git libcrypto-fixes F: lib/crypto/ +F: scripts/crypto/ CRYPTO SPEED TEST COMPARE M: Wang Jinchao From 74d74bb78aeccc9edc10db216d6be121cf7ec176 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Tue, 6 Jan 2026 21:20:23 -0800 Subject: [PATCH 265/283] lib/crypto: aes: Fix missing MMU protection for AES S-box __cacheline_aligned puts the data in the ".data..cacheline_aligned" section, which isn't marked read-only i.e. it doesn't receive MMU protection. Replace it with ____cacheline_aligned which does the right thing and just aligns the data while keeping it in ".rodata". Fixes: b5e0b032b6c3 ("crypto: aes - add generic time invariant AES cipher") Cc: stable@vger.kernel.org Reported-by: Qingfang Deng Closes: https://lore.kernel.org/r/20260105074712.498-1-dqfext@gmail.com/ Acked-by: Ard Biesheuvel Link: https://lore.kernel.org/r/20260107052023.174620-1-ebiggers@kernel.org Signed-off-by: Eric Biggers --- lib/crypto/aes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/crypto/aes.c b/lib/crypto/aes.c index b57fda3460f1..102aaa76bc8d 100644 --- a/lib/crypto/aes.c +++ b/lib/crypto/aes.c @@ -13,7 +13,7 @@ * Emit the sbox as volatile const to prevent the compiler from doing * constant folding on sbox references involving fixed indexes. */ -static volatile const u8 __cacheline_aligned aes_sbox[] = { +static volatile const u8 ____cacheline_aligned aes_sbox[] = { 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5, 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76, 0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0, @@ -48,7 +48,7 @@ static volatile const u8 __cacheline_aligned aes_sbox[] = { 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16, }; -static volatile const u8 __cacheline_aligned aes_inv_sbox[] = { +static volatile const u8 ____cacheline_aligned aes_inv_sbox[] = { 0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38, 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb, 0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87, From 5fcd5513072b09f6533e22a779183fa2818bce81 Mon Sep 17 00:00:00 2001 From: Jiayuan Chen Date: Sun, 4 Jan 2026 20:35:27 +0800 Subject: [PATCH 266/283] arm64: mm: Fix incomplete tag reset in change_memory_common() Running KASAN KUnit tests with {HW,SW}_TAGS mode triggers a fault in change_memory_common(): Call trace: change_memory_common+0x168/0x210 (P) set_memory_ro+0x20/0x48 vmalloc_helpers_tags+0xe8/0x338 kunit_try_run_case+0x74/0x188 kunit_generic_run_threadfn_adapter+0x30/0x70 kthread+0x11c/0x200 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- # vmalloc_helpers_tags: try faulted not ok 67 vmalloc_helpers_tags Commit a06494adb7ef ("arm64: mm: use untagged address to calculate page index") fixed a KASAN warning in the BPF subsystem by adding kasan_reset_tag() to the index calculation. In the execmem flow: bpf_prog_pack_alloc() -> bpf_jit_alloc_exec() -> execmem_alloc() The returned address from execmem_vmalloc/execmem_cache_alloc is passed through kasan_reset_tag(), so start has no tag while area->addr still retains the original tag. The fix correctly handled this case by resetting the tag on area->addr: (start - (unsigned long)kasan_reset_tag(area->addr)) >> PAGE_SHIFT However, in normal vmalloc paths, both start and area->addr have matching tags(or no tags). Resetting only area->addr causes a mismatch when subtracting a tagged address from an untagged one, resulting in an incorrect index. Fix this by resetting tags on both addresses in the index calculation. This ensures correct results regardless of the tag state of either address. Tested with KASAN KUnit tests under CONFIG_KASAN_GENERIC, CONFIG_KASAN_SW_TAGS, and CONFIG_KASAN_HW_TAGS - all pass. Also verified the original BPF KASAN warning from [1] is still fixed. [1] https://lore.kernel.org/all/20251118164115.GA3977565@ax162/ Fixes: a06494adb7ef ("arm64: mm: use untagged address to calculate page index") Signed-off-by: Jiayuan Chen Signed-off-by: Jiayuan Chen Signed-off-by: Catalin Marinas --- arch/arm64/mm/pageattr.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index f0e784b963e6..7176ff39cb87 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -171,7 +171,8 @@ static int change_memory_common(unsigned long addr, int numpages, */ area = find_vm_area((void *)addr); if (!area || - end > (unsigned long)kasan_reset_tag(area->addr) + area->size || + ((unsigned long)kasan_reset_tag((void *)end) > + (unsigned long)kasan_reset_tag(area->addr) + area->size) || ((area->flags & (VM_ALLOC | VM_ALLOW_HUGE_VMAP)) != VM_ALLOC)) return -EINVAL; @@ -184,7 +185,8 @@ static int change_memory_common(unsigned long addr, int numpages, */ if (rodata_full && (pgprot_val(set_mask) == PTE_RDONLY || pgprot_val(clear_mask) == PTE_RDONLY)) { - unsigned long idx = (start - (unsigned long)kasan_reset_tag(area->addr)) + unsigned long idx = ((unsigned long)kasan_reset_tag((void *)start) - + (unsigned long)kasan_reset_tag(area->addr)) >> PAGE_SHIFT; for (; numpages; idx++, numpages--) { ret = __change_memory_common((u64)page_address(area->pages[idx]), From d578b31856cec31315f27b3ba97b212e4c6989b3 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 8 Jan 2026 14:39:19 +0100 Subject: [PATCH 267/283] gpio: shared: fix a false-positive sharing detection with reset-gpios After scanning the devicetree, we remove all entries that have only one reference, while creating GPIO shared proxies for the remaining, shared entries. However: for the reset-gpio corner-case, we will have two references for a "reset-gpios" pin that's not really shared. In this case one will come from the actual consumer fwnode and the other from the potential auxiliary reset-gpio device. This causes the GPIO core to create unnecessary GPIO shared proxy devices for pins that are not really shared. Add a function that can detect this situation and remove entries that have exactly two references but one of them is a reset-gpio. Fixes: 7b78b26757e0 ("gpio: shared: handle the reset-gpios corner case") Link: https://lore.kernel.org/r/20260108-gpio-shared-false-positive-v1-1-5dbf8d1b2f7d@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-shared.c | 34 ++++++++++++++++++++++++++++++++-- 1 file changed, 32 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib-shared.c b/drivers/gpio/gpiolib-shared.c index 076d8642675c..17343fdc9758 100644 --- a/drivers/gpio/gpiolib-shared.c +++ b/drivers/gpio/gpiolib-shared.c @@ -41,6 +41,7 @@ struct gpio_shared_ref { struct lock_class_key lock_key; struct auxiliary_device adev; struct gpiod_lookup_table *lookup; + bool is_reset_gpio; }; /* Represents a single GPIO pin. */ @@ -112,7 +113,8 @@ static int gpio_shared_setup_reset_proxy(struct gpio_shared_entry *entry, struct gpio_shared_ref *ref; list_for_each_entry(ref, &entry->refs, list) { - if (!ref->fwnode && ref->con_id && strcmp(ref->con_id, "reset") == 0) + if (ref->is_reset_gpio) + /* Already set-up. */ return 0; } @@ -120,6 +122,8 @@ static int gpio_shared_setup_reset_proxy(struct gpio_shared_entry *entry, if (!ref) return -ENOMEM; + ref->is_reset_gpio = true; + list_add_tail(&ref->list, &entry->refs); pr_debug("Created a secondary shared GPIO reference for potential reset-gpio device for GPIO %u at %s\n", @@ -714,12 +718,38 @@ static void __init gpio_shared_teardown(void) } } +static bool gpio_shared_entry_is_really_shared(struct gpio_shared_entry *entry) +{ + size_t num_nodes = list_count_nodes(&entry->refs); + struct gpio_shared_ref *ref; + + if (num_nodes <= 1) + return false; + + if (num_nodes > 2) + return true; + + /* Exactly two references: */ + list_for_each_entry(ref, &entry->refs, list) { + /* + * Corner-case: the second reference comes from the potential + * reset-gpio instance. However, this pin is not really shared + * as it would have three references in this case. Avoid + * creating unnecessary proxies. + */ + if (ref->is_reset_gpio) + return false; + } + + return true; +} + static void gpio_shared_free_exclusive(void) { struct gpio_shared_entry *entry, *epos; list_for_each_entry_safe(entry, epos, &gpio_shared_list, list) { - if (list_count_nodes(&entry->refs) > 1) + if (gpio_shared_entry_is_really_shared(entry)) continue; gpio_shared_drop_ref(list_first_entry(&entry->refs, From bdf3f4176092df5281877cacf42f843063b4784d Mon Sep 17 00:00:00 2001 From: Yeoreum Yun Date: Wed, 7 Jan 2026 16:21:15 +0000 Subject: [PATCH 268/283] arm64: Fix cleared E0POE bit after cpu_suspend()/resume() TCR2_ELx.E0POE is set during smp_init(). However, this bit is not reprogrammed when the CPU enters suspension and later resumes via cpu_resume(), as __cpu_setup() does not re-enable E0POE and there is no save/restore logic for the TCR2_ELx system register. As a result, the E0POE feature no longer works after cpu_resume(). To address this, save and restore TCR2_EL1 in the cpu_suspend()/cpu_resume() path, rather than adding related logic to __cpu_setup(), taking into account possible future extensions of the TCR2_ELx feature. Fixes: bf83dae90fbc ("arm64: enable the Permission Overlay Extension for EL0") Cc: # 6.12.x Signed-off-by: Yeoreum Yun Reviewed-by: Anshuman Khandual Reviewed-by: Kevin Brodsky Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/suspend.h | 2 +- arch/arm64/mm/proc.S | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/suspend.h b/arch/arm64/include/asm/suspend.h index e65f33edf9d6..e9ce68d50ba4 100644 --- a/arch/arm64/include/asm/suspend.h +++ b/arch/arm64/include/asm/suspend.h @@ -2,7 +2,7 @@ #ifndef __ASM_SUSPEND_H #define __ASM_SUSPEND_H -#define NR_CTX_REGS 13 +#define NR_CTX_REGS 14 #define NR_CALLEE_SAVED_REGS 12 /* diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 01e868116448..5d907ce3b6d3 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -110,6 +110,10 @@ SYM_FUNC_START(cpu_do_suspend) * call stack. */ str x18, [x0, #96] +alternative_if ARM64_HAS_TCR2 + mrs x2, REG_TCR2_EL1 + str x2, [x0, #104] +alternative_else_nop_endif ret SYM_FUNC_END(cpu_do_suspend) @@ -144,6 +148,10 @@ SYM_FUNC_START(cpu_do_resume) msr tcr_el1, x8 msr vbar_el1, x9 msr mdscr_el1, x10 +alternative_if ARM64_HAS_TCR2 + ldr x2, [x0, #104] + msr REG_TCR2_EL1, x2 +alternative_else_nop_endif msr sctlr_el1, x12 set_this_cpu_offset x13 From 2bdf777410dc6e022d1081885ff34673b5dfee99 Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Tue, 23 Dec 2025 13:51:13 -0800 Subject: [PATCH 269/283] sched/mm_cid: Prevent NULL mm dereference in sched_mm_cid_after_execve() sched_mm_cid_after_execve() is called in bprm_execve()'s cleanup path even when exec_binprm() fails. For the init task's first execve(), this causes a problem: 1. current->mm is NULL (kernel threads don't have an mm) 2. sched_mm_cid_before_execve() exits early because mm is NULL 3. exec_binprm() fails (e.g., ENOENT for missing script interpreter) 4. sched_mm_cid_after_execve() is called with mm still NULL 5. sched_mm_cid_fork() is called unconditionally, triggering WARN_ON This is easily reproduced by booting with an init that is a shell script (#!/bin/sh) where the interpreter doesn't exist in the initramfs. Fix this by checking if t->mm is NULL before calling sched_mm_cid_fork(), matching the behavior of sched_mm_cid_before_execve() which already handles this case via sched_mm_cid_exit()'s early return. Fixes: b0c3d51b54f8 ("sched/mmcid: Provide precomputed maximal value") Signed-off-by: Cong Wang Signed-off-by: Thomas Gleixner Reviewed-by: Mathieu Desnoyers Acked-by: Will Deacon Link: https://patch.msgid.link/20251223215113.639686-1-xiyou.wangcong@gmail.com --- kernel/sched/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 41ba0be16911..60afadb6eede 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -10694,10 +10694,11 @@ void sched_mm_cid_before_execve(struct task_struct *t) sched_mm_cid_exit(t); } -/* Reactivate MM CID after successful execve() */ +/* Reactivate MM CID after execve() */ void sched_mm_cid_after_execve(struct task_struct *t) { - sched_mm_cid_fork(t); + if (t->mm) + sched_mm_cid_fork(t); } static void mm_cid_work_fn(struct work_struct *work) From f0d385f6689f37a2828c686fb279121df006b4cb Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 9 Jan 2026 20:14:54 +0800 Subject: [PATCH 270/283] ublk: fix use-after-free in ublk_partition_scan_work A race condition exists between the async partition scan work and device teardown that can lead to a use-after-free of ub->ub_disk: 1. ublk_ctrl_start_dev() schedules partition_scan_work after add_disk() 2. ublk_stop_dev() calls ublk_stop_dev_unlocked() which does: - del_gendisk(ub->ub_disk) - ublk_detach_disk() sets ub->ub_disk = NULL - put_disk() which may free the disk 3. The worker ublk_partition_scan_work() then dereferences ub->ub_disk leading to UAF Fix this by using ublk_get_disk()/ublk_put_disk() in the worker to hold a reference to the disk during the partition scan. The spinlock in ublk_get_disk() synchronizes with ublk_detach_disk() ensuring the worker either gets a valid reference or sees NULL and exits early. Also change flush_work() to cancel_work_sync() to avoid running the partition scan work unnecessarily when the disk is already detached. Fixes: 7fc4da6a304b ("ublk: scan partition in async way") Reported-by: Ruikai Peng Signed-off-by: Ming Lei Signed-off-by: Jens Axboe --- drivers/block/ublk_drv.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-) diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c index 837fedb02e0d..f6e5a0766721 100644 --- a/drivers/block/ublk_drv.c +++ b/drivers/block/ublk_drv.c @@ -255,20 +255,6 @@ static inline struct request *__ublk_check_and_get_req(struct ublk_device *ub, u16 q_id, u16 tag, struct ublk_io *io, size_t offset); static inline unsigned int ublk_req_build_flags(struct request *req); -static void ublk_partition_scan_work(struct work_struct *work) -{ - struct ublk_device *ub = - container_of(work, struct ublk_device, partition_scan_work); - - if (WARN_ON_ONCE(!test_and_clear_bit(GD_SUPPRESS_PART_SCAN, - &ub->ub_disk->state))) - return; - - mutex_lock(&ub->ub_disk->open_mutex); - bdev_disk_changed(ub->ub_disk, false); - mutex_unlock(&ub->ub_disk->open_mutex); -} - static inline struct ublksrv_io_desc * ublk_get_iod(const struct ublk_queue *ubq, unsigned tag) { @@ -1597,6 +1583,27 @@ static void ublk_put_disk(struct gendisk *disk) put_device(disk_to_dev(disk)); } +static void ublk_partition_scan_work(struct work_struct *work) +{ + struct ublk_device *ub = + container_of(work, struct ublk_device, partition_scan_work); + /* Hold disk reference to prevent UAF during concurrent teardown */ + struct gendisk *disk = ublk_get_disk(ub); + + if (!disk) + return; + + if (WARN_ON_ONCE(!test_and_clear_bit(GD_SUPPRESS_PART_SCAN, + &disk->state))) + goto out; + + mutex_lock(&disk->open_mutex); + bdev_disk_changed(disk, false); + mutex_unlock(&disk->open_mutex); +out: + ublk_put_disk(disk); +} + /* * Use this function to ensure that ->canceling is consistently set for * the device and all queues. Do not set these flags directly. @@ -2041,7 +2048,7 @@ static void ublk_stop_dev(struct ublk_device *ub) mutex_lock(&ub->mutex); ublk_stop_dev_unlocked(ub); mutex_unlock(&ub->mutex); - flush_work(&ub->partition_scan_work); + cancel_work_sync(&ub->partition_scan_work); ublk_cancel_dev(ub); } From 1690eeb0cb2bb77096cb6c826b6849ef05013e34 Mon Sep 17 00:00:00 2001 From: Lorenzo Pieralisi Date: Mon, 22 Dec 2025 11:22:50 +0100 Subject: [PATCH 271/283] irqchip/gic-v5: Fix gicv5_its_map_event() ITTE read endianness Kbuild bot (through sparse) reported that the ITTE read to carry out a valid check in gicv5_its_map_event() lacks proper endianness handling. Add the missing endianess conversion. Fixes: 57d72196dfc8 ("irqchip/gic-v5: Add GICv5 ITS support") Reported-by: kernel test robot Signed-off-by: Lorenzo Pieralisi Signed-off-by: Thomas Gleixner Acked-by: Marc Zyngier Link: https://patch.msgid.link/20251222102250.435460-1-lpieralisi@kernel.org Closes: https://lore.kernel.org/oe-kbuild-all/202512131849.30ZRTBeR-lkp@intel.com/ --- drivers/irqchip/irq-gic-v5-its.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic-v5-its.c b/drivers/irqchip/irq-gic-v5-its.c index 554485f0be1f..8e22134b9f48 100644 --- a/drivers/irqchip/irq-gic-v5-its.c +++ b/drivers/irqchip/irq-gic-v5-its.c @@ -849,7 +849,7 @@ static int gicv5_its_map_event(struct gicv5_its_dev *its_dev, u16 event_id, u32 itte = gicv5_its_device_get_itte_ref(its_dev, event_id); - if (FIELD_GET(GICV5_ITTL2E_VALID, *itte)) + if (FIELD_GET(GICV5_ITTL2E_VALID, le64_to_cpu(*itte))) return -EEXIST; itt_entry = FIELD_PREP(GICV5_ITTL2E_LPI_ID, lpi) | From a33d16dc874a9512c02b1f1a3e08c26a82b4be5e Mon Sep 17 00:00:00 2001 From: Anup Patel Date: Tue, 23 Dec 2025 20:05:44 +0530 Subject: [PATCH 272/283] Revert "irqchip/riscv-imsic: Embed the vector array in lpriv" The __alloc_percpu() fails when the number of IDs are greater than 959 because size parameter of __alloc_percpu() must be less than 32768 (aka PCPU_MIN_UNIT_SIZE). This failure is observed with KVMTOOL when AIA is trap-n-emulated by in-kernel KVM because in this case KVM guest has 2047 interrupt IDs. To address this issue, don't embed vector array in struct imsic_local_priv until __alloc_percpu() support size parameter greater than 32768. This reverts commit 79eaabc61dfb ("irqchip/riscv-imsic: Embed the vector array in lpriv"). Signed-off-by: Anup Patel Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20251223143544.1504217-1-anup.patel@oss.qualcomm.com --- drivers/irqchip/irq-riscv-imsic-state.c | 10 ++++++++-- drivers/irqchip/irq-riscv-imsic-state.h | 2 +- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/irqchip/irq-riscv-imsic-state.c b/drivers/irqchip/irq-riscv-imsic-state.c index 385368052d5c..b6cebfee9461 100644 --- a/drivers/irqchip/irq-riscv-imsic-state.c +++ b/drivers/irqchip/irq-riscv-imsic-state.c @@ -477,6 +477,7 @@ static void __init imsic_local_cleanup(void) lpriv = per_cpu_ptr(imsic->lpriv, cpu); bitmap_free(lpriv->dirty_bitmap); + kfree(lpriv->vectors); } free_percpu(imsic->lpriv); @@ -490,8 +491,7 @@ static int __init imsic_local_init(void) int cpu, i; /* Allocate per-CPU private state */ - imsic->lpriv = __alloc_percpu(struct_size(imsic->lpriv, vectors, global->nr_ids + 1), - __alignof__(*imsic->lpriv)); + imsic->lpriv = alloc_percpu(typeof(*imsic->lpriv)); if (!imsic->lpriv) return -ENOMEM; @@ -511,6 +511,12 @@ static int __init imsic_local_init(void) timer_setup(&lpriv->timer, imsic_local_timer_callback, TIMER_PINNED); #endif + /* Allocate vector array */ + lpriv->vectors = kcalloc(global->nr_ids + 1, sizeof(*lpriv->vectors), + GFP_KERNEL); + if (!lpriv->vectors) + goto fail_local_cleanup; + /* Setup vector array */ for (i = 0; i <= global->nr_ids; i++) { vec = &lpriv->vectors[i]; diff --git a/drivers/irqchip/irq-riscv-imsic-state.h b/drivers/irqchip/irq-riscv-imsic-state.h index 6332501dcbd8..c42ee180b305 100644 --- a/drivers/irqchip/irq-riscv-imsic-state.h +++ b/drivers/irqchip/irq-riscv-imsic-state.h @@ -40,7 +40,7 @@ struct imsic_local_priv { #endif /* Local vector table */ - struct imsic_vector vectors[]; + struct imsic_vector *vectors; }; struct imsic_priv { From 6e39903c73df08b256322d04c4dfe4a82ec63a45 Mon Sep 17 00:00:00 2001 From: Fushuai Wang Date: Fri, 9 Jan 2026 11:36:20 +0800 Subject: [PATCH 273/283] selftests/tracing: Fix test_multiple_writes stall When /sys/kernel/tracing/buffer_size_kb is less than 12KB, the test_multiple_writes test will stall and wait for more input due to insufficient buffer space. Check current buffer_size_kb value before the test. If it is less than 12KB, it temporarily increase the buffer to 12KB, and restore the original value after the tests are completed. Link: https://lore.kernel.org/r/20260109033620.25727-1-fushuai.wang@linux.dev Fixes: 37f46601383a ("selftests/tracing: Add basic test for trace_marker_raw file") Suggested-by: Steven Rostedt Signed-off-by: Fushuai Wang Acked-by: Steven Rostedt (Google) Signed-off-by: Shuah Khan --- .../ftrace/test.d/00basic/trace_marker_raw.tc | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/00basic/trace_marker_raw.tc b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker_raw.tc index 7daf7292209e..a2c42e13f614 100644 --- a/tools/testing/selftests/ftrace/test.d/00basic/trace_marker_raw.tc +++ b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker_raw.tc @@ -89,6 +89,7 @@ test_buffer() { # The id must be four bytes, test that 3 bytes fails a write if echo -n abc > ./trace_marker_raw ; then echo "Too small of write expected to fail but did not" + echo ${ORIG} > buffer_size_kb exit_fail fi @@ -99,9 +100,24 @@ test_buffer() { if write_buffer 0xdeadbeef $size ; then echo "Too big of write expected to fail but did not" + echo ${ORIG} > buffer_size_kb exit_fail fi } +ORIG=`cat buffer_size_kb` + +# test_multiple_writes test needs at least 12KB buffer +NEW_SIZE=12 + +if [ ${ORIG} -lt ${NEW_SIZE} ]; then + echo ${NEW_SIZE} > buffer_size_kb +fi + test_buffer -test_multiple_writes +if ! test_multiple_writes; then + echo ${ORIG} > buffer_size_kb + exit_fail +fi + +echo ${ORIG} > buffer_size_kb From 072a7c7cdbea4f91df854ee2bb216256cd619f2a Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Thu, 8 Jan 2026 10:38:31 +0800 Subject: [PATCH 274/283] erofs: don't bother with s_stack_depth increasing for now MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Previously, commit d53cd891f0e4 ("erofs: limit the level of fs stacking for file-backed mounts") bumped `s_stack_depth` by one to avoid kernel stack overflow when stacking an unlimited number of EROFS on top of each other. This fix breaks composefs mounts, which need EROFS+ovl^2 sometimes (and such setups are already used in production for quite a long time). One way to fix this regression is to bump FILESYSTEM_MAX_STACK_DEPTH from 2 to 3, but proving that this is safe in general is a high bar. After a long discussion on GitHub issues [1] about possible solutions, one conclusion is that there is no need to support nesting file-backed EROFS mounts on stacked filesystems, because there is always the option to use loopback devices as a fallback. As a quick fix for the composefs regression for this cycle, instead of bumping `s_stack_depth` for file backed EROFS mounts, we disallow nesting file-backed EROFS over EROFS and over filesystems with `s_stack_depth` > 0. This works for all known file-backed mount use cases (composefs, containerd, and Android APEX for some Android vendors), and the fix is self-contained. Essentially, we are allowing one extra unaccounted fs stacking level of EROFS below stacking filesystems, but EROFS can only be used in the read path (i.e. overlayfs lower layers), which typically has much lower stack usage than the write path. We can consider increasing FILESYSTEM_MAX_STACK_DEPTH later, after more stack usage analysis or using alternative approaches, such as splitting the `s_stack_depth` limitation according to different combinations of stacking. Fixes: d53cd891f0e4 ("erofs: limit the level of fs stacking for file-backed mounts") Reported-and-tested-by: Dusty Mabe Reported-by: Timothée Ravier Closes: https://github.com/coreos/fedora-coreos-tracker/issues/2087 [1] Reported-by: "Alekséi Naidénov" Closes: https://lore.kernel.org/r/CAFHtUiYv4+=+JP_-JjARWjo6OwcvBj1wtYN=z0QXwCpec9sXtg@mail.gmail.com Acked-by: Amir Goldstein Acked-by: Alexander Larsson Reviewed-and-tested-by: Sheng Yong Reviewed-by: Zhiguo Niu Reviewed-by: Chao Yu Cc: Christian Brauner Cc: Miklos Szeredi Signed-off-by: Gao Xiang --- fs/erofs/super.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/fs/erofs/super.c b/fs/erofs/super.c index 937a215f626c..e93264034b5d 100644 --- a/fs/erofs/super.c +++ b/fs/erofs/super.c @@ -644,14 +644,20 @@ static int erofs_fc_fill_super(struct super_block *sb, struct fs_context *fc) * fs contexts (including its own) due to self-controlled RO * accesses/contexts and no side-effect changes that need to * context save & restore so it can reuse the current thread - * context. However, it still needs to bump `s_stack_depth` to - * avoid kernel stack overflow from nested filesystems. + * context. + * However, we still need to prevent kernel stack overflow due + * to filesystem nesting: just ensure that s_stack_depth is 0 + * to disallow mounting EROFS on stacked filesystems. + * Note: s_stack_depth is not incremented here for now, since + * EROFS is the only fs supporting file-backed mounts for now. + * It MUST change if another fs plans to support them, which + * may also require adjusting FILESYSTEM_MAX_STACK_DEPTH. */ if (erofs_is_fileio_mode(sbi)) { - sb->s_stack_depth = - file_inode(sbi->dif0.file)->i_sb->s_stack_depth + 1; - if (sb->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) { - erofs_err(sb, "maximum fs stacking depth exceeded"); + inode = file_inode(sbi->dif0.file); + if ((inode->i_sb->s_op == &erofs_sops && !sb->s_bdev) || + inode->i_sb->s_stack_depth) { + erofs_err(sb, "file-backed mounts cannot be applied to stacked fses"); return -ENOTBLK; } } From cefd81e76a8c0dc4aa2bacd884acca44e7b61e5b Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 6 Jan 2026 15:22:10 -0400 Subject: [PATCH 275/283] iommupt: Fix the kunit building The kunit doesn't work since the below commit made GENERIC_PT unselectable: $ make ARCH=x86_64 O=build_kunit_x86_64 olddefconfig ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config. This is probably due to unsatisfied dependencies. Missing: CONFIG_DEBUG_GENERIC_PT=y, CONFIG_IOMMUFD_TEST=y, CONFIG_IOMMU_PT_X86_64=y, CONFIG_GENERIC_PT=y, CONFIG_IOMMU_PT_AMDV1=y, CONFIG_IOMMU_PT_VTDSS=y, CONFIG_IOMMU_PT=y, CONFIG_IOMMU_PT_KUNIT_TEST=y Also remove the unneeded CONFIG_IOMMUFD_TEST reference as the iommupt kunit doesn't interact with iommufd, and it doesn't currently build for the kunit due problems with DMA_SHARED buffer either. Fixes: 01569c216dde ("genpt: Make GENERIC_PT invisible") Fixes: 1dd4187f53c3 ("iommupt: Add a kunit test for Generic Page Table") Signed-off-by: Jason Gunthorpe Reviewed-by: Alejandro Jimenez Signed-off-by: Joerg Roedel --- drivers/iommu/generic_pt/.kunitconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/generic_pt/.kunitconfig b/drivers/iommu/generic_pt/.kunitconfig index 52ac9e661ffd..a78b295f264d 100644 --- a/drivers/iommu/generic_pt/.kunitconfig +++ b/drivers/iommu/generic_pt/.kunitconfig @@ -1,4 +1,5 @@ CONFIG_KUNIT=y +CONFIG_COMPILE_TEST=y CONFIG_GENERIC_PT=y CONFIG_DEBUG_GENERIC_PT=y CONFIG_IOMMU_PT=y @@ -11,4 +12,3 @@ CONFIG_IOMMUFD=y CONFIG_DEBUG_KERNEL=y CONFIG_FAULT_INJECTION=y CONFIG_RUNTIME_TESTING_MENU=y -CONFIG_IOMMUFD_TEST=y From faa37ff3bf18d5242fe3d54f5462b1c3254c2567 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 6 Jan 2026 15:22:11 -0400 Subject: [PATCH 276/283] iommufd/selftest: Add missing kconfig for DMA_SHARED_BUFFER The test doesn't build without it, dma-buf.h does not provide stub functions if it is not enabled. Compilation can fail with: ERROR:root:ld: vmlinux.o: in function `iommufd_test': (.text+0x3b1cdd): undefined reference to `dma_buf_get' ld: (.text+0x3b1d08): undefined reference to `dma_buf_put' ld: (.text+0x3b2105): undefined reference to `dma_buf_export' ld: (.text+0x3b211f): undefined reference to `dma_buf_fd' ld: (.text+0x3b2e47): undefined reference to `dma_buf_move_notify' Add the missing select. Fixes: d2041f1f11dd ("iommufd/selftest: Add some tests for the dmabuf flow") Signed-off-by: Jason Gunthorpe Signed-off-by: Joerg Roedel --- drivers/iommu/iommufd/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iommu/iommufd/Kconfig b/drivers/iommu/iommufd/Kconfig index eae3f03629b0..7e41e3ccea75 100644 --- a/drivers/iommu/iommufd/Kconfig +++ b/drivers/iommu/iommufd/Kconfig @@ -42,6 +42,7 @@ config IOMMUFD_TEST depends on FAULT_INJECTION depends on RUNTIME_TESTING_MENU depends on IOMMU_PT_AMDV1 + select DMA_SHARED_BUFFER select IOMMUFD_DRIVER default n help From 7adfd682745a41fdf0279e4457d11fffab145a8f Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Tue, 6 Jan 2026 15:22:12 -0400 Subject: [PATCH 277/283] iommufd/selftest: Prevent module/builtin conflicts in kconfig The selftest now depends on the AMDv1 page table, however the selftest kconfig itself is just an sub-option of the main IOMMUFD module kconfig. This means it cannot be modular and so kconfig allowed a modular IOMMU_PT_AMDV1 with a built in IOMMUFD. This causes link failures: ld: vmlinux.o: in function `mock_domain_alloc_pgtable.isra.0': selftest.c:(.text+0x12e8ad3): undefined reference to `pt_iommu_amdv1_init' ld: vmlinux.o: in function `BSWAP_SHUFB_CTL': sha1-avx2-asm.o:(.rodata+0xaa36a8): undefined reference to `pt_iommu_amdv1_read_and_clear_dirty' ld: sha1-avx2-asm.o:(.rodata+0xaa36f0): undefined reference to `pt_iommu_amdv1_map_pages' ld: sha1-avx2-asm.o:(.rodata+0xaa36f8): undefined reference to `pt_iommu_amdv1_unmap_pages' ld: sha1-avx2-asm.o:(.rodata+0xaa3720): undefined reference to `pt_iommu_amdv1_iova_to_phys' Adjust the kconfig to disable IOMMUFD_TEST if IOMMU_PT_AMDV1 is incompatible. Fixes: e93d5945ed5b ("iommufd: Change the selftest to use iommupt instead of xarray") Suggested-by: Arnd Bergmann Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202512210135.freQWpxa-lkp@intel.com/ Signed-off-by: Jason Gunthorpe Signed-off-by: Joerg Roedel --- drivers/iommu/iommufd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/iommufd/Kconfig b/drivers/iommu/iommufd/Kconfig index 7e41e3ccea75..455bac0351f2 100644 --- a/drivers/iommu/iommufd/Kconfig +++ b/drivers/iommu/iommufd/Kconfig @@ -41,7 +41,7 @@ config IOMMUFD_TEST depends on DEBUG_KERNEL depends on FAULT_INJECTION depends on RUNTIME_TESTING_MENU - depends on IOMMU_PT_AMDV1 + depends on IOMMU_PT_AMDV1=y || IOMMUFD=IOMMU_PT_AMDV1 select DMA_SHARED_BUFFER select IOMMUFD_DRIVER default n From 6a3d5fda2ce464a80a9af9e358dfbab6a989ab5d Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Fri, 9 Jan 2026 10:29:52 -0400 Subject: [PATCH 278/283] iommupt: Make pt_feature() always_inline gcc 8.5 on powerpc does not automatically inline these functions even though they evaluate to constants in key cases. Since the constant propagation is essential for some code elimination and built-time checks this causes a build failure: ERROR: modpost: "__pt_no_sw_bit" [drivers/iommu/generic_pt/fmt/iommu_amdv1.ko] undefined! Caused by this: if (pts_feature(&pts, PT_FEAT_DMA_INCOHERENT) && !pt_test_sw_bit_acquire(&pts, SW_BIT_CACHE_FLUSH_DONE)) flush_writes_item(&pts); Where pts_feature() evaluates to a constant false. Mark them as __always_inline to force it to evaluate to a constant and trigger the code elimination. Fixes: 7c5b184db714 ("genpt: Generic Page Table base API") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202512230720.9y9DtWIo-lkp@intel.com/ Signed-off-by: Jason Gunthorpe --- drivers/iommu/generic_pt/pt_defs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/generic_pt/pt_defs.h b/drivers/iommu/generic_pt/pt_defs.h index c25544d72f97..707b3b0282fa 100644 --- a/drivers/iommu/generic_pt/pt_defs.h +++ b/drivers/iommu/generic_pt/pt_defs.h @@ -202,7 +202,7 @@ static inline bool pt_table_install32(struct pt_state *pts, u32 table_entry) #define PT_SUPPORTED_FEATURE(feature_nr) (PT_SUPPORTED_FEATURES & BIT(feature_nr)) -static inline bool pt_feature(const struct pt_common *common, +static __always_inline bool pt_feature(const struct pt_common *common, unsigned int feature_nr) { if (PT_FORCE_ENABLED_FEATURES & BIT(feature_nr)) @@ -212,7 +212,7 @@ static inline bool pt_feature(const struct pt_common *common, return common->features & BIT(feature_nr); } -static inline bool pts_feature(const struct pt_state *pts, +static __always_inline bool pts_feature(const struct pt_state *pts, unsigned int feature_nr) { return pt_feature(pts->range->common, feature_nr); From 7893cc12251f6f19e7689a4cf3ba803bddbd8437 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Sat, 10 Jan 2026 19:47:03 +0800 Subject: [PATCH 279/283] erofs: fix file-backed mounts no longer working on EROFS partitions Sheng Yong reported [1] that Android APEX images didn't work with commit 072a7c7cdbea ("erofs: don't bother with s_stack_depth increasing for now") because "EROFS-formatted APEX file images can be stored within an EROFS-formatted Android system partition." In response, I sent a quick fat-fingered [PATCH v3] to address the report. Unfortunately, the updated condition was incorrect: if (erofs_is_fileio_mode(sbi)) { - sb->s_stack_depth = - file_inode(sbi->dif0.file)->i_sb->s_stack_depth + 1; - if (sb->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) { - erofs_err(sb, "maximum fs stacking depth exceeded"); + inode = file_inode(sbi->dif0.file); + if ((inode->i_sb->s_op == &erofs_sops && !sb->s_bdev) || + inode->i_sb->s_stack_depth) { The condition `!sb->s_bdev` is always true for all file-backed EROFS mounts, making the check effectively a no-op. The real fix tested and confirmed by Sheng Yong [2] at that time was [PATCH v3 RESEND], which correctly ensures the following EROFS^2 setup works: EROFS (on a block device) + EROFS (file-backed mount) But sadly I screwed it up again by upstreaming the outdated [PATCH v3]. This patch applies the same logic as the delta between the upstream [PATCH v3] and the real fix [PATCH v3 RESEND]. Reported-by: Sheng Yong Closes: https://lore.kernel.org/r/3acec686-4020-4609-aee4-5dae7b9b0093@gmail.com [1] Fixes: 072a7c7cdbea ("erofs: don't bother with s_stack_depth increasing for now") Link: https://lore.kernel.org/r/243f57b8-246f-47e7-9fb1-27a771e8e9e8@gmail.com [2] Signed-off-by: Gao Xiang Signed-off-by: Linus Torvalds --- fs/erofs/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/erofs/super.c b/fs/erofs/super.c index e93264034b5d..5136cda5972a 100644 --- a/fs/erofs/super.c +++ b/fs/erofs/super.c @@ -655,7 +655,8 @@ static int erofs_fc_fill_super(struct super_block *sb, struct fs_context *fc) */ if (erofs_is_fileio_mode(sbi)) { inode = file_inode(sbi->dif0.file); - if ((inode->i_sb->s_op == &erofs_sops && !sb->s_bdev) || + if ((inode->i_sb->s_op == &erofs_sops && + !inode->i_sb->s_bdev) || inode->i_sb->s_stack_depth) { erofs_err(sb, "file-backed mounts cannot be applied to stacked fses"); return -ENOTBLK; From 2e4b28c48f88ce9e263957b1d944cf5349952f88 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 11 Jan 2026 16:53:48 +0100 Subject: [PATCH 280/283] treewide: Update email address In a vain attempt to consolidate the email zoo switch everything to the kernel.org account. Signed-off-by: Thomas Gleixner Signed-off-by: Linus Torvalds --- .mailmap | 1 + CREDITS | 2 +- .../ABI/stable/sysfs-kernel-time-aux-clocks | 2 +- Documentation/arch/x86/topology.rst | 2 +- Documentation/core-api/cpu_hotplug.rst | 2 +- Documentation/core-api/genericirq.rst | 2 +- Documentation/core-api/librs.rst | 2 +- .../bindings/timer/mrvl,mmp-timer.yaml | 2 +- Documentation/driver-api/mtdnand.rst | 4 +-- .../zh_CN/core-api/cpu_hotplug.rst | 2 +- .../zh_CN/core-api/genericirq.rst | 2 +- MAINTAINERS | 36 +++++++++---------- arch/sh/kernel/perf_event.c | 2 +- arch/sparc/kernel/perf_event.c | 2 +- arch/x86/events/core.c | 2 +- arch/x86/events/perf_event.h | 2 +- arch/x86/kernel/x86_init.c | 2 +- arch/x86/mm/pti.c | 2 +- drivers/mtd/nand/ecc-sw-hamming.c | 2 +- drivers/mtd/nand/raw/diskonchip.c | 2 +- drivers/mtd/nand/raw/nand_base.c | 4 +-- drivers/mtd/nand/raw/nand_bbt.c | 2 +- drivers/mtd/nand/raw/nand_ids.c | 2 +- drivers/mtd/nand/raw/nand_jedec.c | 2 +- drivers/mtd/nand/raw/nand_legacy.c | 2 +- drivers/mtd/nand/raw/nand_onfi.c | 2 +- drivers/mtd/nand/raw/ndfc.c | 2 +- drivers/uio/uio.c | 2 +- fs/jffs2/wbuf.c | 4 +-- include/linux/hrtimer.h | 2 +- include/linux/ktime.h | 2 +- include/linux/mtd/jedec.h | 2 +- include/linux/mtd/nand-ecc-sw-hamming.h | 2 +- include/linux/mtd/ndfc.h | 2 +- include/linux/mtd/onfi.h | 2 +- include/linux/mtd/platnand.h | 2 +- include/linux/mtd/rawnand.h | 2 +- include/linux/perf_event.h | 2 +- include/linux/plist.h | 2 +- include/linux/rslib.h | 2 +- include/linux/uio_driver.h | 2 +- include/uapi/linux/perf_event.h | 2 +- kernel/events/callchain.c | 2 +- kernel/events/core.c | 2 +- kernel/events/ring_buffer.c | 2 +- kernel/irq/debugfs.c | 2 +- kernel/irq/matrix.c | 2 +- kernel/sched/fair.c | 2 +- kernel/sched/pelt.c | 2 +- kernel/time/clockevents.c | 2 +- kernel/time/hrtimer.c | 2 +- kernel/time/tick-broadcast.c | 2 +- kernel/time/tick-common.c | 2 +- kernel/time/tick-oneshot.c | 2 +- kernel/time/tick-sched.c | 2 +- lib/debugobjects.c | 2 +- lib/plist.c | 2 +- lib/reed_solomon/decode_rs.c | 2 +- lib/reed_solomon/encode_rs.c | 2 +- lib/reed_solomon/reed_solomon.c | 2 +- scripts/spdxcheck.py | 2 +- tools/include/uapi/linux/perf_event.h | 2 +- tools/perf/builtin-list.c | 2 +- 63 files changed, 83 insertions(+), 82 deletions(-) diff --git a/.mailmap b/.mailmap index b23e0853d636..fa018b5bd533 100644 --- a/.mailmap +++ b/.mailmap @@ -801,6 +801,7 @@ Tanzir Hasan Tejun Heo Tomeu Vizoso Thomas Graf +Thomas Gleixner Thomas Körper Thomas Pedersen Thorsten Blum diff --git a/CREDITS b/CREDITS index ca75f110edb6..383809bc4b7a 100644 --- a/CREDITS +++ b/CREDITS @@ -1398,7 +1398,7 @@ D: SRM environment driver (for Alpha systems) P: 1024D/8399E1BB 250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 8399 E1BB N: Thomas Gleixner -E: tglx@linutronix.de +E: tglx@kernel.org D: NAND flash hardware support, JFFS2 on NAND flash N: Jérôme Glisse diff --git a/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks b/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks index 825508f42af6..e1a894c8dd1b 100644 --- a/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks +++ b/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks @@ -1,5 +1,5 @@ What: /sys/kernel/time/aux_clocks//enable Date: May 2025 -Contact: Thomas Gleixner +Contact: Thomas Gleixner Description: Controls the enablement of auxiliary clock timekeepers. diff --git a/Documentation/arch/x86/topology.rst b/Documentation/arch/x86/topology.rst index 86bec8ac2c4d..f779a68875c5 100644 --- a/Documentation/arch/x86/topology.rst +++ b/Documentation/arch/x86/topology.rst @@ -17,7 +17,7 @@ with the generic one and look at this one in parallel for the x86 specifics. Needless to say, code should use the generic functions - this file is *only* here to *document* the inner workings of x86 topology. -Started by Thomas Gleixner and Borislav Petkov . +Started by Thomas Gleixner and Borislav Petkov . The main aim of the topology facilities is to present adequate interfaces to code which needs to know/query/use the structure of the running system wrt diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst index e1b0eeabbb5e..9b4afca9fd09 100644 --- a/Documentation/core-api/cpu_hotplug.rst +++ b/Documentation/core-api/cpu_hotplug.rst @@ -8,7 +8,7 @@ CPU hotplug in the Kernel Srivatsa Vaddagiri , Ashok Raj , Joel Schopp , - Thomas Gleixner + Thomas Gleixner Introduction ============ diff --git a/Documentation/core-api/genericirq.rst b/Documentation/core-api/genericirq.rst index 582bde9bf5a9..b16d751d4b98 100644 --- a/Documentation/core-api/genericirq.rst +++ b/Documentation/core-api/genericirq.rst @@ -439,6 +439,6 @@ Credits The following people have contributed to this document: -1. Thomas Gleixner tglx@linutronix.de +1. Thomas Gleixner tglx@kernel.org 2. Ingo Molnar mingo@elte.hu diff --git a/Documentation/core-api/librs.rst b/Documentation/core-api/librs.rst index 6010f5bc5bf9..0d88893dbc03 100644 --- a/Documentation/core-api/librs.rst +++ b/Documentation/core-api/librs.rst @@ -209,4 +209,4 @@ testing. Thanks a lot. The following people have contributed to this document: -Thomas Gleixner\ tglx@linutronix.de +Thomas Gleixner\ tglx@kernel.org diff --git a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml index fe6bc4173789..0643cfcc6bc7 100644 --- a/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml +++ b/Documentation/devicetree/bindings/timer/mrvl,mmp-timer.yaml @@ -8,7 +8,7 @@ title: Marvell MMP Timer maintainers: - Daniel Lezcano - - Thomas Gleixner + - Thomas Gleixner - Rob Herring properties: diff --git a/Documentation/driver-api/mtdnand.rst b/Documentation/driver-api/mtdnand.rst index ce77e024c4f1..adf03983f1ba 100644 --- a/Documentation/driver-api/mtdnand.rst +++ b/Documentation/driver-api/mtdnand.rst @@ -996,11 +996,11 @@ The following people have contributed to the NAND driver: 2. David Woodhouse\ dwmw2@infradead.org -3. Thomas Gleixner\ tglx@linutronix.de +3. Thomas Gleixner\ tglx@kernel.org A lot of users have provided bugfixes, improvements and helping hands for testing. Thanks a lot. The following people have contributed to this document: -1. Thomas Gleixner\ tglx@linutronix.de +1. Thomas Gleixner\ tglx@kernel.org diff --git a/Documentation/translations/zh_CN/core-api/cpu_hotplug.rst b/Documentation/translations/zh_CN/core-api/cpu_hotplug.rst index bc0d7ea6d834..3447fbf0e695 100644 --- a/Documentation/translations/zh_CN/core-api/cpu_hotplug.rst +++ b/Documentation/translations/zh_CN/core-api/cpu_hotplug.rst @@ -22,7 +22,7 @@ Srivatsa Vaddagiri , Ashok Raj , Joel Schopp , - Thomas Gleixner + Thomas Gleixner 简介 ==== diff --git a/Documentation/translations/zh_CN/core-api/genericirq.rst b/Documentation/translations/zh_CN/core-api/genericirq.rst index 05ccb954c18d..d2c1bd94bb97 100644 --- a/Documentation/translations/zh_CN/core-api/genericirq.rst +++ b/Documentation/translations/zh_CN/core-api/genericirq.rst @@ -404,6 +404,6 @@ kernel/irq/chip.c 感谢以下人士对本文档作出的贡献： -1. Thomas Gleixner tglx@linutronix.de +1. Thomas Gleixner tglx@kernel.org 2. Ingo Molnar mingo@elte.hu diff --git a/MAINTAINERS b/MAINTAINERS index 32b5e41d9849..ee036e0a3ef6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6175,7 +6175,7 @@ F: include/linux/clk.h CLOCKSOURCE, CLOCKEVENT DRIVERS M: Daniel Lezcano -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core @@ -6541,7 +6541,7 @@ S: Maintained F: drivers/cpufreq/virtual-cpufreq.c CPU HOTPLUG -M: Thomas Gleixner +M: Thomas Gleixner M: Peter Zijlstra L: linux-kernel@vger.kernel.org S: Maintained @@ -6968,7 +6968,7 @@ F: Documentation/scsi/dc395x.rst F: drivers/scsi/dc395x.* DEBUGOBJECTS: -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/debugobjects @@ -10371,7 +10371,7 @@ F: include/uapi/linux/fuse.h F: tools/testing/selftests/filesystems/fuse/ FUTEX SUBSYSTEM -M: Thomas Gleixner +M: Thomas Gleixner M: Ingo Molnar R: Peter Zijlstra R: Darren Hart @@ -10515,7 +10515,7 @@ F: drivers/base/arch_topology.c F: include/linux/arch_topology.h GENERIC ENTRY CODE -M: Thomas Gleixner +M: Thomas Gleixner M: Peter Zijlstra M: Andy Lutomirski L: linux-kernel@vger.kernel.org @@ -10628,7 +10628,7 @@ F: drivers/uio/uio_pci_generic.c GENERIC VDSO LIBRARY M: Andy Lutomirski -M: Thomas Gleixner +M: Thomas Gleixner M: Vincenzo Frascino L: linux-kernel@vger.kernel.org S: Maintained @@ -11241,7 +11241,7 @@ F: drivers/hid/hid-logitech-hidpp.c HIGH-RESOLUTION TIMERS, TIMER WHEEL, CLOCKEVENTS M: Anna-Maria Behnsen M: Frederic Weisbecker -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core @@ -11264,7 +11264,7 @@ R: Boqun Feng R: FUJITA Tomonori R: Frederic Weisbecker R: Lyude Paul -R: Thomas Gleixner +R: Thomas Gleixner R: Anna-Maria Behnsen R: John Stultz R: Stephen Boyd @@ -13334,7 +13334,7 @@ F: Documentation/devicetree/bindings/sound/irondevice,* F: sound/soc/codecs/sma* IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY) -M: Thomas Gleixner +M: Thomas Gleixner S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core F: Documentation/core-api/irq/irq-domain.rst @@ -13344,7 +13344,7 @@ F: kernel/irq/irqdomain.c F: kernel/irq/msi.c IRQ SUBSYSTEM -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core @@ -13357,7 +13357,7 @@ F: kernel/irq/ F: lib/group_cpus.c IRQCHIP DRIVERS -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core @@ -14451,7 +14451,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-nonmm-unstab F: lib/* LICENSES and SPDX stuff -M: Thomas Gleixner +M: Thomas Gleixner M: Greg Kroah-Hartman L: linux-spdx@vger.kernel.org S: Maintained @@ -18576,7 +18576,7 @@ NOHZ, DYNTICKS SUPPORT M: Anna-Maria Behnsen M: Frederic Weisbecker M: Ingo Molnar -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/nohz @@ -20761,7 +20761,7 @@ F: drivers/platform/x86/portwell-ec.c POSIX CLOCKS and TIMERS M: Anna-Maria Behnsen M: Frederic Weisbecker -M: Thomas Gleixner +M: Thomas Gleixner L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core @@ -26272,7 +26272,7 @@ F: drivers/net/wireless/ti/ TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER M: John Stultz -M: Thomas Gleixner +M: Thomas Gleixner R: Stephen Boyd L: linux-kernel@vger.kernel.org S: Supported @@ -28203,7 +28203,7 @@ F: net/lapb/ F: net/x25/ X86 ARCHITECTURE (32-BIT AND 64-BIT) -M: Thomas Gleixner +M: Thomas Gleixner M: Ingo Molnar M: Borislav Petkov M: Dave Hansen @@ -28219,7 +28219,7 @@ F: tools/testing/selftests/x86 X86 CPUID DATABASE M: Borislav Petkov -M: Thomas Gleixner +M: Thomas Gleixner M: x86@kernel.org R: Ahmed S. Darwish L: x86-cpuid@lists.linux.dev @@ -28235,7 +28235,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/asm F: arch/x86/entry/ X86 HARDWARE VULNERABILITIES -M: Thomas Gleixner +M: Thomas Gleixner M: Borislav Petkov M: Peter Zijlstra M: Josh Poimboeuf diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c index 1d2507f22437..1fbb7d46e484 100644 --- a/arch/sh/kernel/perf_event.c +++ b/arch/sh/kernel/perf_event.c @@ -7,7 +7,7 @@ * Heavily based on the x86 and PowerPC implementations. * * x86: - * Copyright (C) 2008 Thomas Gleixner + * Copyright (C) 2008 Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar * Copyright (C) 2009 Jaswinder Singh Rajput * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index cae4d33002a5..0ce4ae343531 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -6,7 +6,7 @@ * This code is based almost entirely upon the x86 perf event * code, which is: * - * Copyright (C) 2008 Thomas Gleixner + * Copyright (C) 2008 Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar * Copyright (C) 2009 Jaswinder Singh Rajput * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index 0c38a31d5fc7..576baa9a52c5 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -1,7 +1,7 @@ /* * Performance events x86 architecture code * - * Copyright (C) 2008 Thomas Gleixner + * Copyright (C) 2008 Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar * Copyright (C) 2009 Jaswinder Singh Rajput * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h index 3161ec0a3416..62963022b517 100644 --- a/arch/x86/events/perf_event.h +++ b/arch/x86/events/perf_event.h @@ -1,7 +1,7 @@ /* * Performance events x86 architecture header * - * Copyright (C) 2008 Thomas Gleixner + * Copyright (C) 2008 Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar * Copyright (C) 2009 Jaswinder Singh Rajput * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index 0a2bbd674a6d..ebefb77c37bb 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009 Thomas Gleixner + * Copyright (C) 2009 Linutronix GmbH, Thomas Gleixner * * For licencing details see kernel-base/COPYING */ diff --git a/arch/x86/mm/pti.c b/arch/x86/mm/pti.c index b10d4d131dce..f7546e9e8e89 100644 --- a/arch/x86/mm/pti.c +++ b/arch/x86/mm/pti.c @@ -15,7 +15,7 @@ * Signed-off-by: Michael Schwarz * * Major changes to the original code by: Dave Hansen - * Mostly rewritten by Thomas Gleixner and + * Mostly rewritten by Thomas Gleixner and * Andy Lutomirsky */ #include diff --git a/drivers/mtd/nand/ecc-sw-hamming.c b/drivers/mtd/nand/ecc-sw-hamming.c index f2d0effad9d2..bc62a71f9fdd 100644 --- a/drivers/mtd/nand/ecc-sw-hamming.c +++ b/drivers/mtd/nand/ecc-sw-hamming.c @@ -8,7 +8,7 @@ * * Completely replaces the previous ECC implementation which was written by: * Steven J. Hill (sjhill@realitydiluted.com) - * Thomas Gleixner (tglx@linutronix.de) + * Thomas Gleixner (tglx@kernel.org) * * Information on how this algorithm works and how it was developed * can be found in Documentation/driver-api/mtd/nand_ecc.rst diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c index 70d6c2250f32..540b6baf8bb1 100644 --- a/drivers/mtd/nand/raw/diskonchip.c +++ b/drivers/mtd/nand/raw/diskonchip.c @@ -11,7 +11,7 @@ * Error correction code lifted from the old docecc code * Author: Fabrice Bellard (fabrice.bellard@netgem.com) * Copyright (C) 2000 Netgem S.A. - * converted to the generic Reed-Solomon library by Thomas Gleixner + * converted to the generic Reed-Solomon library by Thomas Gleixner * * Interface to generic NAND code for M-Systems DiskOnChip devices */ diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c index ad6d66309597..f2322de93ab4 100644 --- a/drivers/mtd/nand/raw/nand_base.c +++ b/drivers/mtd/nand/raw/nand_base.c @@ -8,7 +8,7 @@ * http://www.linux-mtd.infradead.org/doc/nand.html * * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * 2002-2006 Thomas Gleixner (tglx@linutronix.de) + * 2002-2006 Thomas Gleixner (tglx@kernel.org) * * Credits: * David Woodhouse for adding multichip support @@ -6594,5 +6594,5 @@ EXPORT_SYMBOL_GPL(nand_cleanup); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Steven J. Hill "); -MODULE_AUTHOR("Thomas Gleixner "); +MODULE_AUTHOR("Thomas Gleixner "); MODULE_DESCRIPTION("Generic NAND flash driver code"); diff --git a/drivers/mtd/nand/raw/nand_bbt.c b/drivers/mtd/nand/raw/nand_bbt.c index a8fba5f39f59..3050ab7e6eb6 100644 --- a/drivers/mtd/nand/raw/nand_bbt.c +++ b/drivers/mtd/nand/raw/nand_bbt.c @@ -3,7 +3,7 @@ * Overview: * Bad block table support for the NAND driver * - * Copyright © 2004 Thomas Gleixner (tglx@linutronix.de) + * Copyright © 2004 Thomas Gleixner (tglx@kernel.org) * * Description: * diff --git a/drivers/mtd/nand/raw/nand_ids.c b/drivers/mtd/nand/raw/nand_ids.c index 650351c62af6..62a8cf86d9e2 100644 --- a/drivers/mtd/nand/raw/nand_ids.c +++ b/drivers/mtd/nand/raw/nand_ids.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) + * Copyright (C) 2002 Thomas Gleixner (tglx@kernel.org) */ #include diff --git a/drivers/mtd/nand/raw/nand_jedec.c b/drivers/mtd/nand/raw/nand_jedec.c index b3cc8f360529..89e6dd8ed1a8 100644 --- a/drivers/mtd/nand/raw/nand_jedec.c +++ b/drivers/mtd/nand/raw/nand_jedec.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * 2002-2006 Thomas Gleixner (tglx@linutronix.de) + * 2002-2006 Thomas Gleixner (tglx@kernel.org) * * Credits: * David Woodhouse for adding multichip support diff --git a/drivers/mtd/nand/raw/nand_legacy.c b/drivers/mtd/nand/raw/nand_legacy.c index 743792edf98d..97700f80d5b8 100644 --- a/drivers/mtd/nand/raw/nand_legacy.c +++ b/drivers/mtd/nand/raw/nand_legacy.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * 2002-2006 Thomas Gleixner (tglx@linutronix.de) + * 2002-2006 Thomas Gleixner (tglx@kernel.org) * * Credits: * David Woodhouse for adding multichip support diff --git a/drivers/mtd/nand/raw/nand_onfi.c b/drivers/mtd/nand/raw/nand_onfi.c index 861975e44b55..11954440e4de 100644 --- a/drivers/mtd/nand/raw/nand_onfi.c +++ b/drivers/mtd/nand/raw/nand_onfi.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) - * 2002-2006 Thomas Gleixner (tglx@linutronix.de) + * 2002-2006 Thomas Gleixner (tglx@kernel.org) * * Credits: * David Woodhouse for adding multichip support diff --git a/drivers/mtd/nand/raw/ndfc.c b/drivers/mtd/nand/raw/ndfc.c index 13365128194d..7ad8bc04be1a 100644 --- a/drivers/mtd/nand/raw/ndfc.c +++ b/drivers/mtd/nand/raw/ndfc.c @@ -272,5 +272,5 @@ static struct platform_driver ndfc_driver = { module_platform_driver(ndfc_driver); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Thomas Gleixner "); +MODULE_AUTHOR("Thomas Gleixner "); MODULE_DESCRIPTION("OF Platform driver for NDFC"); diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index d93ed4e86a17..fa0d4e6aee16 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -3,7 +3,7 @@ * drivers/uio/uio.c * * Copyright(C) 2005, Benedikt Spranger - * Copyright(C) 2005, Thomas Gleixner + * Copyright(C) 2005, Linutronix GmbH, Thomas Gleixner * Copyright(C) 2006, Hans J. Koch * Copyright(C) 2006, Greg Kroah-Hartman * diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c index bb815a002984..3ab3f0ff7ebb 100644 --- a/fs/jffs2/wbuf.c +++ b/fs/jffs2/wbuf.c @@ -2,10 +2,10 @@ * JFFS2 -- Journalling Flash File System, Version 2. * * Copyright © 2001-2007 Red Hat, Inc. - * Copyright © 2004 Thomas Gleixner + * Copyright © 2004 Thomas Gleixner * * Created by David Woodhouse - * Modified debugged and enhanced by Thomas Gleixner + * Modified debugged and enhanced by Thomas Gleixner * * For licensing information, see the file 'LICENCE' in this directory. * diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 2cf1bf65b225..0de12f14d6a4 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -2,7 +2,7 @@ /* * hrtimers - High-resolution kernel timers * - * Copyright(C) 2005, Thomas Gleixner + * Copyright(C) 2005, Linutronix GmbH, Thomas Gleixner * Copyright(C) 2005, Red Hat, Inc., Ingo Molnar * * data type definitions, declarations, prototypes diff --git a/include/linux/ktime.h b/include/linux/ktime.h index 383ed9985802..f247e564602f 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -3,7 +3,7 @@ * * ktime_t - nanosecond-resolution time format. * - * Copyright(C) 2005, Thomas Gleixner + * Copyright(C) 2005, Linutronix GmbH, Thomas Gleixner * Copyright(C) 2005, Red Hat, Inc., Ingo Molnar * * data type definitions, declarations, prototypes and macros. diff --git a/include/linux/mtd/jedec.h b/include/linux/mtd/jedec.h index 56047a4e54c9..255972f3d88d 100644 --- a/include/linux/mtd/jedec.h +++ b/include/linux/mtd/jedec.h @@ -2,7 +2,7 @@ /* * Copyright © 2000-2010 David Woodhouse * Steven J. Hill - * Thomas Gleixner + * Thomas Gleixner * * Contains all JEDEC related definitions */ diff --git a/include/linux/mtd/nand-ecc-sw-hamming.h b/include/linux/mtd/nand-ecc-sw-hamming.h index c6c71894c575..2aa2f8ef68d2 100644 --- a/include/linux/mtd/nand-ecc-sw-hamming.h +++ b/include/linux/mtd/nand-ecc-sw-hamming.h @@ -2,7 +2,7 @@ /* * Copyright (C) 2000-2010 Steven J. Hill * David Woodhouse - * Thomas Gleixner + * Thomas Gleixner * * This file is the header for the NAND Hamming ECC implementation. */ diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h index 98f075b86931..622891191e9c 100644 --- a/include/linux/mtd/ndfc.h +++ b/include/linux/mtd/ndfc.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * Copyright (c) 2006 Thomas Gleixner + * Copyright (c) 2006 Linutronix GmbH, Thomas Gleixner * * Info: * Contains defines, datastructures for ndfc nand controller diff --git a/include/linux/mtd/onfi.h b/include/linux/mtd/onfi.h index 55ab2e4d62f9..09a5cbd8f232 100644 --- a/include/linux/mtd/onfi.h +++ b/include/linux/mtd/onfi.h @@ -2,7 +2,7 @@ /* * Copyright © 2000-2010 David Woodhouse * Steven J. Hill - * Thomas Gleixner + * Thomas Gleixner * * Contains all ONFI related definitions */ diff --git a/include/linux/mtd/platnand.h b/include/linux/mtd/platnand.h index bc11eb6b593b..2df6fba699f2 100644 --- a/include/linux/mtd/platnand.h +++ b/include/linux/mtd/platnand.h @@ -2,7 +2,7 @@ /* * Copyright © 2000-2010 David Woodhouse * Steven J. Hill - * Thomas Gleixner + * Thomas Gleixner * * Contains all platform NAND related definitions. */ diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index d30bdc3fcfd7..5c70e7bd3ed5 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -2,7 +2,7 @@ /* * Copyright © 2000-2010 David Woodhouse * Steven J. Hill - * Thomas Gleixner + * Thomas Gleixner * * Info: * Contains standard defines and IDs for NAND flash devices diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 9870d768db4c..9ded2e582c60 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1,7 +1,7 @@ /* * Performance events: * - * Copyright (C) 2008-2009, Thomas Gleixner + * Copyright (C) 2008-2009, Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra * diff --git a/include/linux/plist.h b/include/linux/plist.h index 8c1c8adf7fe9..16cf4355b5c1 100644 --- a/include/linux/plist.h +++ b/include/linux/plist.h @@ -8,7 +8,7 @@ * 2001-2005 (c) MontaVista Software, Inc. * Daniel Walker * - * (C) 2005 Thomas Gleixner + * (C) 2005 Linutronix GmbH, Thomas Gleixner * * Simplifications of the original code by * Oleg Nesterov diff --git a/include/linux/rslib.h b/include/linux/rslib.h index a04dacbdc8ae..a2848f6907e3 100644 --- a/include/linux/rslib.h +++ b/include/linux/rslib.h @@ -2,7 +2,7 @@ /* * Generic Reed Solomon encoder / decoder library * - * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de) + * Copyright (C) 2004 Thomas Gleixner (tglx@kernel.org) * * RS code lifted from reed solomon library written by Phil Karn * Copyright 2002 Phil Karn, KA9Q diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h index 18238dc8bfd3..334641e20fb1 100644 --- a/include/linux/uio_driver.h +++ b/include/linux/uio_driver.h @@ -3,7 +3,7 @@ * include/linux/uio_driver.h * * Copyright(C) 2005, Benedikt Spranger - * Copyright(C) 2005, Thomas Gleixner + * Copyright(C) 2005, Linutronix GmbH, Thomas Gleixner * Copyright(C) 2006, Hans J. Koch * Copyright(C) 2006, Greg Kroah-Hartman * diff --git a/include/uapi/linux/perf_event.h b/include/uapi/linux/perf_event.h index c44a8fb3e418..72f03153dd32 100644 --- a/include/uapi/linux/perf_event.h +++ b/include/uapi/linux/perf_event.h @@ -2,7 +2,7 @@ /* * Performance events: * - * Copyright (C) 2008-2009, Thomas Gleixner + * Copyright (C) 2008-2009, Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra * diff --git a/kernel/events/callchain.c b/kernel/events/callchain.c index b9c7e00725d6..1f6589578703 100644 --- a/kernel/events/callchain.c +++ b/kernel/events/callchain.c @@ -2,7 +2,7 @@ /* * Performance events callchain code, extracted from core.c: * - * Copyright (C) 2008 Thomas Gleixner + * Copyright (C) 2008 Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar * Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra * Copyright © 2009 Paul Mackerras, IBM Corp. diff --git a/kernel/events/core.c b/kernel/events/core.c index dad0d3d2e85f..f5e9d30e4fa9 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -2,7 +2,7 @@ /* * Performance events core code: * - * Copyright (C) 2008 Thomas Gleixner + * Copyright (C) 2008 Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar * Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra * Copyright © 2009 Paul Mackerras, IBM Corp. diff --git a/kernel/events/ring_buffer.c b/kernel/events/ring_buffer.c index 20a905023736..3e7de2661417 100644 --- a/kernel/events/ring_buffer.c +++ b/kernel/events/ring_buffer.c @@ -2,7 +2,7 @@ /* * Performance events ring-buffer code: * - * Copyright (C) 2008 Thomas Gleixner + * Copyright (C) 2008 Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar * Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra * Copyright © 2009 Paul Mackerras, IBM Corp. diff --git a/kernel/irq/debugfs.c b/kernel/irq/debugfs.c index 3527defd2890..5c5ebaee35f2 100644 --- a/kernel/irq/debugfs.c +++ b/kernel/irq/debugfs.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright 2017 Thomas Gleixner +// Copyright 2017 Linutronix GmbH, Thomas Gleixner #include #include diff --git a/kernel/irq/matrix.c b/kernel/irq/matrix.c index 8f222d1cccec..a50f2305a8dc 100644 --- a/kernel/irq/matrix.c +++ b/kernel/irq/matrix.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (C) 2017 Thomas Gleixner +// Copyright (C) 2017 Linutronix GmbH, Thomas Gleixner #include #include diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index da46c3164537..e71302282671 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -15,7 +15,7 @@ * Author: Srivatsa Vaddagiri * * Scaled math optimizations by Thomas Gleixner - * Copyright (C) 2007, Thomas Gleixner + * Copyright (C) 2007, Linutronix GmbH, Thomas Gleixner * * Adaptive scheduling granularity, math enhancements by Peter Zijlstra * Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra diff --git a/kernel/sched/pelt.c b/kernel/sched/pelt.c index fa83bbaf4f3e..897790889ba3 100644 --- a/kernel/sched/pelt.c +++ b/kernel/sched/pelt.c @@ -15,7 +15,7 @@ * Author: Srivatsa Vaddagiri * * Scaled math optimizations by Thomas Gleixner - * Copyright (C) 2007, Thomas Gleixner + * Copyright (C) 2007, Linutronix GmbH, Thomas Gleixner * * Adaptive scheduling granularity, math enhancements by Peter Zijlstra * Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c index a59bc75ab7c5..eaae1ce9f060 100644 --- a/kernel/time/clockevents.c +++ b/kernel/time/clockevents.c @@ -2,7 +2,7 @@ /* * This file contains functions which manage clock event devices. * - * Copyright(C) 2005-2006, Thomas Gleixner + * Copyright(C) 2005-2006, Linutronix GmbH, Thomas Gleixner * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar * Copyright(C) 2006-2007, Timesys Corp., Thomas Gleixner */ diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index f8ea8c8fc895..bdb30cc5e873 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright(C) 2005-2006, Thomas Gleixner + * Copyright(C) 2005-2006, Linutronix GmbH, Thomas Gleixner * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar * Copyright(C) 2006-2007 Timesys Corp., Thomas Gleixner * diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 0207868c8b4d..f63c65881364 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -3,7 +3,7 @@ * This file contains functions which emulate a local clock-event * device via a broadcast event source. * - * Copyright(C) 2005-2006, Thomas Gleixner + * Copyright(C) 2005-2006, Linutronix GmbH, Thomas Gleixner * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar * Copyright(C) 2006-2007, Timesys Corp., Thomas Gleixner */ diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 7e33d3f2e889..d305d8521896 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -3,7 +3,7 @@ * This file contains the base functions to manage periodic tick * related events. * - * Copyright(C) 2005-2006, Thomas Gleixner + * Copyright(C) 2005-2006, Linutronix GmbH, Thomas Gleixner * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar * Copyright(C) 2006-2007, Timesys Corp., Thomas Gleixner */ diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c index ffee943d796d..7472597f3225 100644 --- a/kernel/time/tick-oneshot.c +++ b/kernel/time/tick-oneshot.c @@ -3,7 +3,7 @@ * This file contains functions which manage high resolution tick * related events. * - * Copyright(C) 2005-2006, Thomas Gleixner + * Copyright(C) 2005-2006, Linutronix GmbH, Thomas Gleixner * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar * Copyright(C) 2006-2007, Timesys Corp., Thomas Gleixner */ diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 8ddf74e705d3..2f8a7923fa27 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright(C) 2005-2006, Thomas Gleixner + * Copyright(C) 2005-2006, Linutronix GmbH, Thomas Gleixner * Copyright(C) 2005-2007, Red Hat, Inc., Ingo Molnar * Copyright(C) 2006-2007 Timesys Corp., Thomas Gleixner * diff --git a/lib/debugobjects.c b/lib/debugobjects.c index ecf8e7f978e3..89a1d6745dc2 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -2,7 +2,7 @@ /* * Generic infrastructure for lifetime debugging of objects. * - * Copyright (C) 2008, Thomas Gleixner + * Copyright (C) 2008, Linutronix GmbH, Thomas Gleixner */ #define pr_fmt(fmt) "ODEBUG: " fmt diff --git a/lib/plist.c b/lib/plist.c index ba677c31e8f3..a5bef38add43 100644 --- a/lib/plist.c +++ b/lib/plist.c @@ -10,7 +10,7 @@ * 2001-2005 (c) MontaVista Software, Inc. * Daniel Walker * - * (C) 2005 Thomas Gleixner + * (C) 2005 Linutronix GmbH, Thomas Gleixner * * Simplifications of the original code by * Oleg Nesterov diff --git a/lib/reed_solomon/decode_rs.c b/lib/reed_solomon/decode_rs.c index 805de84ae83d..ef86ee2aec58 100644 --- a/lib/reed_solomon/decode_rs.c +++ b/lib/reed_solomon/decode_rs.c @@ -5,7 +5,7 @@ * Copyright 2002, Phil Karn, KA9Q * May be used under the terms of the GNU General Public License (GPL) * - * Adaption to the kernel by Thomas Gleixner (tglx@linutronix.de) + * Adaption to the kernel by Thomas Gleixner (tglx@kernel.org) * * Generic data width independent code which is included by the wrappers. */ diff --git a/lib/reed_solomon/encode_rs.c b/lib/reed_solomon/encode_rs.c index 9112d46e869e..1d9e51dcc83d 100644 --- a/lib/reed_solomon/encode_rs.c +++ b/lib/reed_solomon/encode_rs.c @@ -5,7 +5,7 @@ * Copyright 2002, Phil Karn, KA9Q * May be used under the terms of the GNU General Public License (GPL) * - * Adaption to the kernel by Thomas Gleixner (tglx@linutronix.de) + * Adaption to the kernel by Thomas Gleixner (tglx@kernel.org) * * Generic data width independent code which is included by the wrappers. */ diff --git a/lib/reed_solomon/reed_solomon.c b/lib/reed_solomon/reed_solomon.c index bbc01bad3053..a9e2dcb6f2a7 100644 --- a/lib/reed_solomon/reed_solomon.c +++ b/lib/reed_solomon/reed_solomon.c @@ -2,7 +2,7 @@ /* * Generic Reed Solomon encoder / decoder library * - * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de) + * Copyright (C) 2004 Thomas Gleixner (tglx@kernel.org) * * Reed Solomon code lifted from reed solomon library written by Phil Karn * Copyright 2002 Phil Karn, KA9Q diff --git a/scripts/spdxcheck.py b/scripts/spdxcheck.py index 8d608f61bf37..908029e45ca2 100755 --- a/scripts/spdxcheck.py +++ b/scripts/spdxcheck.py @@ -1,6 +1,6 @@ #!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0 -# Copyright Thomas Gleixner +# Copyright Linutronix GmbH, Thomas Gleixner from argparse import ArgumentParser from ply import lex, yacc diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h index c44a8fb3e418..72f03153dd32 100644 --- a/tools/include/uapi/linux/perf_event.h +++ b/tools/include/uapi/linux/perf_event.h @@ -2,7 +2,7 @@ /* * Performance events: * - * Copyright (C) 2008-2009, Thomas Gleixner + * Copyright (C) 2008-2009, Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra * diff --git a/tools/perf/builtin-list.c b/tools/perf/builtin-list.c index 5cbca0bacd35..87a5491048ac 100644 --- a/tools/perf/builtin-list.c +++ b/tools/perf/builtin-list.c @@ -4,7 +4,7 @@ * * Builtin list command: list all event types * - * Copyright (C) 2009, Thomas Gleixner + * Copyright (C) 2009, Linutronix GmbH, Thomas Gleixner * Copyright (C) 2008-2009, Red Hat Inc, Ingo Molnar * Copyright (C) 2011, Red Hat Inc, Arnaldo Carvalho de Melo */ From 0f61b1860cc3f52aef9036d7235ed1f017632193 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 11 Jan 2026 17:03:14 -1000 Subject: [PATCH 281/283] Linux 6.19-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 665b79aa21b8..9d38125263fb 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 6 PATCHLEVEL = 19 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Baby Opossum Posse # *DOCUMENTATION* From da1456e435ae84852bda484cd4d60f47228d52fc Mon Sep 17 00:00:00 2001 From: Andreas Kemnade Date: Fri, 2 Jan 2026 11:13:56 +0100 Subject: [PATCH 282/283] regulator: dt-bindings: Document TI TPS65185 Document the TPS65185. GPIO names are same as in the datasheet except for the PWRUP pad which is described as "enable". That pin is optional because the rising edge corresponds to setting one register bit and falling edge to another register bit. Reviewed-by: Krzysztof Kozlowski Signed-off-by: Andreas Kemnade Link: https://patch.msgid.link/20260102-tps65185-submit-v3-1-23bda35772f2@kemnade.info Signed-off-by: Mark Brown --- .../bindings/regulator/ti,tps65185.yaml | 96 +++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps65185.yaml diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65185.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65185.yaml new file mode 100644 index 000000000000..af0f638b80bc --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps65185.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps65185.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS65185 Power Management Integrated Circuit + +maintainers: + - Andreas Kemnade + +description: + TPS65185 is a Power Management IC to provide Power for EPDs with one 3.3V + switch, 2 symmetric LDOs behind 2 DC/DC converters, and one unsymmetric + regulator for a compensation voltage. + +properties: + compatible: + const: ti,tps65185 + + reg: + maxItems: 1 + + enable-gpios: + description: + PWRUP pin + maxItems: 1 + + pwr-good-gpios: + maxItems: 1 + + vcom-ctrl-gpios: + maxItems: 1 + + wakeup-gpios: + maxItems: 1 + + vin-supply: true + + interrupts: + maxItems: 1 + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(vcom|vposneg|v3p3)$": + unevaluatedProperties: false + type: object + $ref: /schemas/regulator/regulator.yaml + +required: + - compatible + - reg + - pwr-good-gpios + - vin-supply + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@18 { + compatible = "ti,tps65185"; + reg = <0x18>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tps65185_gpio>; + pwr-good-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; + vcom-ctrl-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; + wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + vin-supply = <&epdc_pmic_supply>; + interrupts-extended = <&gpio2 0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + vcom { + regulator-name = "vcom"; + }; + + vposneg { + regulator-name = "vposneg"; + regulator-min-microvolt = <15000000>; + regulator-max-microvolt = <15000000>; + }; + + v3p3 { + regulator-name = "v3p3"; + }; + }; + }; + }; From b0fc1e7701940d12ea2c41f386aa552bc4cc3629 Mon Sep 17 00:00:00 2001 From: Andreas Kemnade Date: Fri, 2 Jan 2026 11:13:57 +0100 Subject: [PATCH 283/283] regulator: Add TPS65185 driver Add a driver for the TPS65185 regulator. Implement handling of the various gpio pins. Because the PWRUP (=enable) pin functionality can be achieved by just using two bits instead, just ensure that it is set to a stable value. Implement the pair of symmetric LDOs as a single regulator because they share a single voltage set register. As the VCOM regulator sits behind that machinery, just define that one as a supply. For simplicity, just add the temperature sensor (depending on external NTC) directly. There is a mechanism to measure some kick-back voltage during a defined EPD operation, to calibrate the VCOM voltage setting and store that non-volatile in the chip to be the power up default setup. That is not implemented yet in the driver, but that also means that there is a non-factory default value in these registers after power-up. Tested-by: Josua Mayer Signed-off-by: Andreas Kemnade Link: https://patch.msgid.link/20260102-tps65185-submit-v3-2-23bda35772f2@kemnade.info Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 11 + drivers/regulator/Makefile | 1 + drivers/regulator/tps65185.c | 454 +++++++++++++++++++++++++++++++++++ 3 files changed, 466 insertions(+) create mode 100644 drivers/regulator/tps65185.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index d2335276cce5..5c539782e48d 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1690,6 +1690,17 @@ config REGULATOR_TPS65132 This driver supports TPS65132 single inductor - dual output power supply specifically designed for display panels. +config REGULATOR_TPS65185 + tristate "TI TPS65185 EPD regulator" + depends on I2C + select REGMAP_I2C + help + This driver supports the TPS65185 voltage regulator chip + which is used to provide power to Electronic Paper Displays + so it is found in E-Book readers. + If HWWON is enabled, it also provides temperature measurement. + + config REGULATOR_TPS65217 tristate "TI TPS65217 Power regulators" depends on MFD_TPS65217 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 1beba1493241..240de94cd432 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -192,6 +192,7 @@ obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o obj-$(CONFIG_REGULATOR_TPS65086) += tps65086-regulator.o obj-$(CONFIG_REGULATOR_TPS65090) += tps65090-regulator.o +obj-$(CONFIG_REGULATOR_TPS65185) += tps65185.o obj-$(CONFIG_REGULATOR_TPS65217) += tps65217-regulator.o obj-$(CONFIG_REGULATOR_TPS65218) += tps65218-regulator.o obj-$(CONFIG_REGULATOR_TPS65219) += tps65219-regulator.o diff --git a/drivers/regulator/tps65185.c b/drivers/regulator/tps65185.c new file mode 100644 index 000000000000..3286c9ab33d0 --- /dev/null +++ b/drivers/regulator/tps65185.c @@ -0,0 +1,454 @@ +// SPDX-License-Identifier: GPL-2.0-only +// Copyright (C) 2025 Andreas Kemnade + +/* Datasheet: https://www.ti.com/lit/gpn/tps65185 */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TPS65185_REG_TMST_VALUE 0 +#define TPS65185_REG_ENABLE 1 +#define TPS65185_REG_VADJ 2 +#define TPS65185_REG_VCOM1 3 +#define TPS65185_REG_VCOM2 4 +#define TPS65185_REG_INT_EN1 5 +#define TPS65185_REG_INT_EN2 6 +#define TPS65185_REG_INT1 7 +#define TPS65185_REG_INT2 8 +#define TPS65185_REG_TMST1 0xd +#define TPS65185_REG_TMST2 0xe +#define TPS65185_REG_PG 0xf +#define TPS65185_REG_REVID 0x10 + +#define TPS65185_READ_THERM BIT(7) +#define TPS65185_CONV_END BIT(5) + +#define TPS65185_ENABLE_ACTIVE BIT(7) +#define TPS65185_ENABLE_STANDBY BIT(6) + +#define PGOOD_TIMEOUT_MSECS 200 + +struct tps65185_data { + struct device *dev; + struct regmap *regmap; + struct gpio_desc *pgood_gpio; + struct gpio_desc *pwrup_gpio; + struct gpio_desc *vcom_ctrl_gpio; + struct gpio_desc *wakeup_gpio; + struct completion pgood_completion; + int pgood_irq; + struct completion tmst_completion; +}; + +static const struct hwmon_channel_info *tps65185_info[] = { + HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + NULL +}; + +static int tps65185_hwmon_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *temp) +{ + struct tps65185_data *data = dev_get_drvdata(dev); + unsigned int val; + int ret; + + reinit_completion(&data->tmst_completion); + /* start acquisition */ + regmap_update_bits(data->regmap, TPS65185_REG_TMST1, + TPS65185_READ_THERM, TPS65185_READ_THERM); + wait_for_completion_timeout(&data->tmst_completion, + msecs_to_jiffies(PGOOD_TIMEOUT_MSECS)); + ret = regmap_read(data->regmap, TPS65185_REG_TMST1, &val); + if (!(val & TPS65185_CONV_END)) + return -ETIMEDOUT; + + ret = regmap_read(data->regmap, TPS65185_REG_TMST_VALUE, &val); + if (ret) + return ret; + + *temp = (s8)val * 1000; + + return 0; +} + +static umode_t tps65185_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + return 0444; +} + +static const struct hwmon_ops tps65185_hwmon_ops = { + .is_visible = tps65185_hwmon_is_visible, + .read = tps65185_hwmon_read, +}; + +static const struct hwmon_chip_info tps65185_chip_info = { + .ops = &tps65185_hwmon_ops, + .info = tps65185_info, +}; + +static bool tps65185_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TPS65185_REG_TMST_VALUE: + case TPS65185_REG_ENABLE: + case TPS65185_REG_VCOM2: + case TPS65185_REG_INT1: + case TPS65185_REG_INT2: + case TPS65185_REG_TMST1: + return true; + default: + return false; + } +} + +static const struct regmap_config regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x10, + .cache_type = REGCACHE_MAPLE, + .volatile_reg = tps65185_volatile_reg, +}; + +static const struct regulator_ops tps65185_v3p3ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, +}; + +static int tps65185_check_powergood(struct regulator_dev *rdev) +{ + struct tps65185_data *data = rdev_get_drvdata(rdev); + + return gpiod_get_value_cansleep(data->pgood_gpio); +} + +static int tps65185_vposneg_get_voltage_sel(struct regulator_dev *rdev) +{ + int ret; + + ret = regulator_get_voltage_sel_regmap(rdev); + if (ret < 0) + return ret; + + /* highest value is lowest voltage */ + return 6 - ret; +} + +static int tps65185_vposneg_set_voltage_sel(struct regulator_dev *rdev, unsigned int selector) +{ + return regulator_set_voltage_sel_regmap(rdev, 6 - selector); +} + +static irqreturn_t pgood_handler(int irq, void *dev_id) +{ + struct tps65185_data *data = dev_id; + + complete(&data->pgood_completion); + + return IRQ_HANDLED; +} + +static int tps65185_vposneg_enable(struct regulator_dev *rdev) +{ + struct tps65185_data *data = rdev_get_drvdata(rdev); + int ret; + + reinit_completion(&data->pgood_completion); + if (data->pwrup_gpio) + ret = gpiod_set_value_cansleep(data->pwrup_gpio, 1); + else + ret = regmap_update_bits(data->regmap, TPS65185_REG_ENABLE, + TPS65185_ENABLE_ACTIVE, + TPS65185_ENABLE_ACTIVE); + + if (ret) + return ret; + + dev_dbg(data->dev, "turning on..."); + wait_for_completion_timeout(&data->pgood_completion, + msecs_to_jiffies(PGOOD_TIMEOUT_MSECS)); + dev_dbg(data->dev, "turned on"); + if (gpiod_get_value_cansleep(data->pgood_gpio) != 1) + return -ETIMEDOUT; + + return 0; +} + +static int tps65185_vposneg_disable(struct regulator_dev *rdev) +{ + struct tps65185_data *data = rdev_get_drvdata(rdev); + int ret; + + if (data->pwrup_gpio) + ret = gpiod_set_value_cansleep(data->pwrup_gpio, 0); + else + ret = regmap_update_bits(data->regmap, TPS65185_REG_ENABLE, + TPS65185_ENABLE_STANDBY, + TPS65185_ENABLE_STANDBY); + + return ret; +} + +static int tps65185_vcom_set_voltage_sel(struct regulator_dev *rdev, unsigned int selector) +{ + struct tps65185_data *data = rdev_get_drvdata(rdev); + int ret; + + ret = regmap_update_bits(data->regmap, TPS65185_REG_VCOM2, BIT(0), selector >> 8); + if (ret < 0) + return ret; + + return regmap_write(data->regmap, TPS65185_REG_VCOM1, selector & 0xFF); +} + +static int tps65185_vcom_get_voltage_sel(struct regulator_dev *rdev) +{ + struct tps65185_data *data = rdev_get_drvdata(rdev); + int ret; + unsigned int sel, sel2; + + ret = regmap_read(data->regmap, TPS65185_REG_VCOM1, &sel); + if (ret < 0) + return ret; + + ret = regmap_read(data->regmap, TPS65185_REG_VCOM2, &sel2); + if (ret < 0) + return ret; + + if (sel2 & BIT(0)) + sel |= 0x100; + + return sel; +} + +static const struct regulator_ops tps65185_vcom_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .set_voltage_sel = tps65185_vcom_set_voltage_sel, + .get_voltage_sel = tps65185_vcom_get_voltage_sel, +}; + +static const struct regulator_ops tps65185_vposneg_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .enable = tps65185_vposneg_enable, + .disable = tps65185_vposneg_disable, + .is_enabled = tps65185_check_powergood, + .set_voltage_sel = tps65185_vposneg_set_voltage_sel, + .get_voltage_sel = tps65185_vposneg_get_voltage_sel, +}; + +static const struct regulator_desc regulators[] = { + { + .name = "v3p3", + .of_match = of_match_ptr("v3p3"), + .regulators_node = of_match_ptr("regulators"), + .id = 0, + .ops = &tps65185_v3p3ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .enable_reg = TPS65185_REG_ENABLE, + .enable_mask = BIT(5), + .n_voltages = 1, + .min_uV = 3300000, + }, + { + .name = "vposneg", + .of_match = of_match_ptr("vposneg"), + .regulators_node = of_match_ptr("regulators"), + .id = 1, + .ops = &tps65185_vposneg_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = 4, + .vsel_reg = TPS65185_REG_VADJ, + .vsel_mask = 0x7, + .min_uV = 14250000, + .uV_step = 250000, + } +}; + +static const struct regulator_desc vcom_regulator_desc = { + .name = "vcom", + .of_match = of_match_ptr("vcom"), + .regulators_node = of_match_ptr("regulators"), + .supply_name = "vposneg", + .id = 2, + .ops = &tps65185_vcom_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .n_voltages = 511, + .min_uV = 0, + .uV_step = 10000, +}; + +static irqreturn_t tps65185_irq_thread(int irq, void *dev_id) +{ + struct tps65185_data *data = dev_id; + unsigned int int_status_1, int_status_2; + int ret; + + /* read both status to have irq cleared */ + ret = regmap_read(data->regmap, TPS65185_REG_INT1, &int_status_1); + if (ret) + return IRQ_NONE; + + ret = regmap_read(data->regmap, TPS65185_REG_INT2, &int_status_2); + if (ret) + return IRQ_NONE; + + if (int_status_2 & BIT(0)) + complete(&data->tmst_completion); + + dev_dbg(data->dev, "irq status %02x %02x\n", int_status_1, int_status_2); + + if (int_status_1 || int_status_2) + return IRQ_HANDLED; + + return IRQ_NONE; +} + +static int tps65185_probe(struct i2c_client *client) +{ + struct tps65185_data *data; + struct regulator_config config = { }; + struct regulator_dev *rdev; + int ret = 0; + int i; + + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + data->regmap = devm_regmap_init_i2c(client, ®map_config); + if (IS_ERR(data->regmap)) + return dev_err_probe(&client->dev, PTR_ERR(data->regmap), + "failed to allocate regmap!\n"); + + data->pgood_gpio = devm_gpiod_get(&client->dev, "pwr-good", GPIOD_IN); + if (IS_ERR(data->pgood_gpio)) + return dev_err_probe(&client->dev, + PTR_ERR(data->pgood_gpio), + "failed to get power good gpio\n"); + + data->pgood_irq = gpiod_to_irq(data->pgood_gpio); + if (data->pgood_irq < 0) + return data->pgood_irq; + + data->pwrup_gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(data->pwrup_gpio)) + return dev_err_probe(&client->dev, PTR_ERR(data->pwrup_gpio), + "failed to get pwrup gpio\n"); + + data->wakeup_gpio = devm_gpiod_get_optional(&client->dev, "wakeup", GPIOD_OUT_HIGH); + if (IS_ERR(data->wakeup_gpio)) + return dev_err_probe(&client->dev, + PTR_ERR(data->wakeup_gpio), + "failed to get wakeup gpio\n"); + + data->vcom_ctrl_gpio = devm_gpiod_get_optional(&client->dev, "vcom-ctrl", GPIOD_OUT_LOW); + if (IS_ERR(data->vcom_ctrl_gpio)) + return dev_err_probe(&client->dev, + PTR_ERR(data->vcom_ctrl_gpio), + "failed to get vcm ctrl gpio\n"); + + ret = devm_regulator_get_enable(&client->dev, "vin"); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to get vin regulator\n"); + + data->dev = &client->dev; + i2c_set_clientdata(client, data); + + init_completion(&data->pgood_completion); + init_completion(&data->tmst_completion); + + ret = devm_request_threaded_irq(&client->dev, data->pgood_irq, NULL, + pgood_handler, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "PGOOD", data); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to request power good irq\n"); + + if (client->irq) { + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, tps65185_irq_thread, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "tps65185", data); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to request irq\n"); + } + + ret = regmap_update_bits(data->regmap, TPS65185_REG_INT_EN2, BIT(0), BIT(0)); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to enable temp irq\n"); + + config.driver_data = data; + config.dev = &client->dev; + config.regmap = data->regmap; + + for (i = 0; i < ARRAY_SIZE(regulators); i++) { + rdev = devm_regulator_register(&client->dev, ®ulators[i], + &config); + if (IS_ERR(rdev)) + return dev_err_probe(&client->dev, PTR_ERR(rdev), + "failed to register %s regulator\n", + regulators[i].name); + } + + config.ena_gpiod = data->vcom_ctrl_gpio; + rdev = devm_regulator_register(&client->dev, &vcom_regulator_desc, &config); + if (IS_ERR(rdev)) + return dev_err_probe(&client->dev, PTR_ERR(rdev), + "failed to register vcom regulator\n"); + + if (IS_REACHABLE(CONFIG_HWMON)) { + struct device *hwmon_dev; + + hwmon_dev = devm_hwmon_device_register_with_info(&client->dev, "tps65185", data, + &tps65185_chip_info, NULL); + if (IS_ERR(hwmon_dev)) + dev_notice(&client->dev, "failed to register hwmon\n"); + } + + return 0; +} + +static const struct of_device_id tps65185_dt_ids[] = { + { + .compatible = "ti,tps65185", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, tps65185_dt_ids); + +static struct i2c_driver tps65185_i2c_driver = { + .driver = { + .name = "tps65185", + .of_match_table = tps65185_dt_ids, + }, + .probe = tps65185_probe, +}; + +module_i2c_driver(tps65185_i2c_driver); + +/* Module information */ +MODULE_DESCRIPTION("TPS65185 regulator driver"); +MODULE_LICENSE("GPL"); +