clk: qcom: Add TCSR clock driver for Kaanapali

Add the TCSR clock controller that provides the refclks on Kaanapali
platform for PCIe, USB and UFS subsystems.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251209-gcc_kaanapali-v3-v5-3-3af118262289@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

drivers/clk/qcom/Kconfig

@@ -46,6 +46,14 @@ config CLK_GLYMUR_TCSRCC
 	  Support for the TCSR clock controller on GLYMUR devices.
 	  Say Y if you want to use peripheral devices such as USB/PCIe/EDP.
 
+config CLK_KAANAPALI_TCSRCC
+	tristate "Kaanapali TCSR Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select QCOM_GDSC
+	help
+	  Support for the TCSR clock controller on Kaanapali devices.
+	  Say Y if you want to use peripheral devices such as PCIe, USB, UFS.
+
 config CLK_X1E80100_CAMCC
 	tristate "X1E80100 Camera Clock Controller"
 	depends on ARM64 || COMPILE_TEST

drivers/clk/qcom/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o
 obj-$(CONFIG_CLK_GLYMUR_DISPCC) += dispcc-glymur.o
 obj-$(CONFIG_CLK_GLYMUR_GCC) += gcc-glymur.o
 obj-$(CONFIG_CLK_GLYMUR_TCSRCC) += tcsrcc-glymur.o
+obj-$(CONFIG_CLK_KAANAPALI_TCSRCC) += tcsrcc-kaanapali.o
 obj-$(CONFIG_CLK_X1E80100_CAMCC) += camcc-x1e80100.o
 obj-$(CONFIG_CLK_X1E80100_DISPCC) += dispcc-x1e80100.o
 obj-$(CONFIG_CLK_X1E80100_GCC) += gcc-x1e80100.o

drivers/clk/qcom/tcsrcc-kaanapali.c

@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,sm8750-tcsr.h>
+
+#include "clk-branch.h"
+#include "clk-regmap.h"
+#include "clk-regmap-divider.h"
+#include "clk-regmap-mux.h"
+#include "common.h"
+
+enum {
+	DT_BI_TCXO_PAD,
+};
+
+static struct clk_branch tcsr_pcie_0_clkref_en = {
+	.halt_reg = 0x15044,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15044,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "tcsr_pcie_0_clkref_en",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_usb3_clkref_en = {
+	.halt_reg = 0x1504c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1504c,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "tcsr_usb3_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_ufs_clkref_en = {
+	.halt_reg = 0x15054,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x15054,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "tcsr_ufs_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch tcsr_usb2_clkref_en = {
+	.halt_reg = 0x1505c,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1505c,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data) {
+			.name = "tcsr_usb2_clkref_en",
+			.parent_data = &(const struct clk_parent_data){
+				.index = DT_BI_TCXO_PAD,
+			},
+			.num_parents = 1,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_regmap *tcsr_cc_kaanapali_clocks[] = {
+	[TCSR_PCIE_0_CLKREF_EN] = &tcsr_pcie_0_clkref_en.clkr,
+	[TCSR_UFS_CLKREF_EN] = &tcsr_ufs_clkref_en.clkr,
+	[TCSR_USB2_CLKREF_EN] = &tcsr_usb2_clkref_en.clkr,
+	[TCSR_USB3_CLKREF_EN] = &tcsr_usb3_clkref_en.clkr,
+};
+
+static const struct regmap_config tcsr_cc_kaanapali_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x3d000,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc tcsr_cc_kaanapali_desc = {
+	.config = &tcsr_cc_kaanapali_regmap_config,
+	.clks = tcsr_cc_kaanapali_clocks,
+	.num_clks = ARRAY_SIZE(tcsr_cc_kaanapali_clocks),
+};
+
+static const struct of_device_id tcsr_cc_kaanapali_match_table[] = {
+	{ .compatible = "qcom,kaanapali-tcsr" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tcsr_cc_kaanapali_match_table);
+
+static int tcsr_cc_kaanapali_probe(struct platform_device *pdev)
+{
+	return qcom_cc_probe(pdev, &tcsr_cc_kaanapali_desc);
+}
+
+static struct platform_driver tcsr_cc_kaanapali_driver = {
+	.probe = tcsr_cc_kaanapali_probe,
+	.driver = {
+		.name = "tcsr_cc-kaanapali",
+		.of_match_table = tcsr_cc_kaanapali_match_table,
+	},
+};
+
+static int __init tcsr_cc_kaanapali_init(void)
+{
+	return platform_driver_register(&tcsr_cc_kaanapali_driver);
+}
+subsys_initcall(tcsr_cc_kaanapali_init);
+
+static void __exit tcsr_cc_kaanapali_exit(void)
+{
+	platform_driver_unregister(&tcsr_cc_kaanapali_driver);
+}
+module_exit(tcsr_cc_kaanapali_exit);
+
+MODULE_DESCRIPTION("QTI TCSR_CC Kaanapali Driver");
+MODULE_LICENSE("GPL");