regulator: dt-bindings: Document TI TPS65185

Document the TPS65185. GPIO names are same as in the datasheet except for
the PWRUP pad which is described as "enable". That pin is optional because
the rising edge corresponds to setting one register bit and falling edge
to another register bit.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260102-tps65185-submit-v3-1-23bda35772f2@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Andreas Kemnade 2026-01-02 11:13:56 +01:00 committed by Mark Brown
parent 0f61b1860c
commit da1456e435
No known key found for this signature in database
GPG key ID: 24D68B725D5487D0

View file

@ -0,0 +1,96 @@
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/ti,tps65185.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: TI TPS65185 Power Management Integrated Circuit
maintainers:
- Andreas Kemnade <andreas@kemnade.info>
description:
TPS65185 is a Power Management IC to provide Power for EPDs with one 3.3V
switch, 2 symmetric LDOs behind 2 DC/DC converters, and one unsymmetric
regulator for a compensation voltage.
properties:
compatible:
const: ti,tps65185
reg:
maxItems: 1
enable-gpios:
description:
PWRUP pin
maxItems: 1
pwr-good-gpios:
maxItems: 1
vcom-ctrl-gpios:
maxItems: 1
wakeup-gpios:
maxItems: 1
vin-supply: true
interrupts:
maxItems: 1
regulators:
type: object
additionalProperties: false
patternProperties:
"^(vcom|vposneg|v3p3)$":
unevaluatedProperties: false
type: object
$ref: /schemas/regulator/regulator.yaml
required:
- compatible
- reg
- pwr-good-gpios
- vin-supply
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@18 {
compatible = "ti,tps65185";
reg = <0x18>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tps65185_gpio>;
pwr-good-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
vcom-ctrl-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
vin-supply = <&epdc_pmic_supply>;
interrupts-extended = <&gpio2 0 IRQ_TYPE_LEVEL_LOW>;
regulators {
vcom {
regulator-name = "vcom";
};
vposneg {
regulator-name = "vposneg";
regulator-min-microvolt = <15000000>;
regulator-max-microvolt = <15000000>;
};
v3p3 {
regulator-name = "v3p3";
};
};
};
};