hwmon: (pmbus) Add mp5926 driver

Add support for mps mp5926.

Signed-off-by: Yuxi Wang <Yuxi.Wang@monolithicpower.com>
Link: https://lore.kernel.org/r/20251219055413.1661-3-Yuxi.Wang@monolithicpower.com
[groeck: Use consistent comment style, and use return value from dev_err_probe()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Documentation/hwmon/index.rst

@@ -185,6 +185,7 @@ Hardware Monitoring Kernel Drivers
    mp2993
    mp5023
    mp5920
+   mp5926
    mp5990
    mp9941
    mp9945

Documentation/hwmon/mp5926.rst

@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver mp5926
+====================
+
+Supported chips:
+
+  * MPS mp5926
+
+    Prefix: 'mp5926'
+
+  * Datasheet
+    https://www.monolithicpower.com/en/
+
+Author:
+
+	Yuxi Wang <Yuxi.Wang@monolithicpower.com>
+
+Description
+-----------
+
+This driver implements support for Monolithic Power Systems, Inc. (MPS)
+MP5926 Hot-Swap Controller.
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+The driver exports the following attributes via the 'sysfs' files
+for input voltage:
+
+**in1_input**
+
+**in1_label**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+The driver provides the following attributes for output voltage:
+
+**in2_input**
+
+**in2_label**
+
+**in2_lcrit**
+
+**in2_lcrit_alarm**
+
+**in2_rated_max**
+
+**in2_rated_min**
+
+The driver provides the following attributes for input current:
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+The driver provides the following attributes for output current:
+
+**curr2_input**
+
+**curr2_label**
+
+The driver provides the following attributes for input power:
+
+**power1_input**
+
+**power1_label**
+
+The driver provides the following attributes for output power:
+
+**power2_input**
+
+**power2_label**
+
+The driver provides the following attributes for temperature:
+
+**temp1_input**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
+
+**temp1_max**
+
+**temp1_max_alarm**

MAINTAINERS

@@ -17736,6 +17736,13 @@ S:	Maintained
 F:	Documentation/hwmon/mp2993.rst
 F:	drivers/hwmon/pmbus/mp2993.c
 
+MPS MP5926 DRIVER
+M:	Yuxi Wang <Yuxi.Wang@monolithicpower.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/mp5926.rst
+F:	drivers/hwmon/pmbus/mp5926.c
+
 MPS MP9941 DRIVER
 M:	Noah Wang <noahwang.wang@outlook.com>
 L:	linux-hwmon@vger.kernel.org

drivers/hwmon/pmbus/Kconfig

@@ -472,6 +472,15 @@ config SENSORS_MP5920
 	  This driver can also be built as a module. If so, the module will
 	  be called mp5920.
 
+config SENSORS_MP5926
+	tristate "MPS MP5926"
+	help
+	  If you say yes here you get hardware monitoring support for Monolithic
+	  MP5926.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mp5926.
+
 config SENSORS_MP5990
 	tristate "MPS MP5990"
 	help

drivers/hwmon/pmbus/Makefile

@@ -47,6 +47,7 @@ obj-$(CONFIG_SENSORS_MP2975)	+= mp2975.o
 obj-$(CONFIG_SENSORS_MP2993)	+= mp2993.o
 obj-$(CONFIG_SENSORS_MP5023)	+= mp5023.o
 obj-$(CONFIG_SENSORS_MP5920)	+= mp5920.o
+obj-$(CONFIG_SENSORS_MP5926)	+= mp5926.o
 obj-$(CONFIG_SENSORS_MP5990)	+= mp5990.o
 obj-$(CONFIG_SENSORS_MP9941)	+= mp9941.o
 obj-$(CONFIG_SENSORS_MP9945)	+= mp9945.o

drivers/hwmon/pmbus/mp5926.c

@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * mp5926.c  - pmbus driver for mps mp5926
+ *
+ * Copyright 2025 Monolithic Power Systems, Inc
+ *
+ * Author: Yuxi Wang <Yuxi.Wang@monolithicpower.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+#define PAGE	0x01
+#define EFUSE_CFG	0xCF
+#define I_SCALE_SEL	0xC6
+#define MP5926_FUNC	(PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \
+			PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | \
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_INPUT | \
+			PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_VOUT)
+
+struct mp5926_data {
+	struct pmbus_driver_info info;
+	u8 vout_mode;
+	u8 vout_linear_exponent;
+};
+
+#define to_mp5926_data(x)  container_of(x, struct mp5926_data, info)
+
+static int mp5926_read_byte_data(struct i2c_client *client, int page,
+				 int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct mp5926_data *data = to_mp5926_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VOUT_MODE:
+		if (data->vout_mode == linear) {
+			/*
+			 * The VOUT format used by the chip is linear11,
+			 * not linear16. Report that VOUT is in linear mode
+			 * and return exponent value extracted while probing
+			 * the chip.
+			 */
+			return data->vout_linear_exponent;
+		}
+		return PB_VOUT_MODE_DIRECT;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int mp5926_read_word_data(struct i2c_client *client, int page, int phase,
+				 int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct mp5926_data *data = to_mp5926_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_READ_VOUT:
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (ret < 0)
+			return ret;
+		/*
+		 * Because the VOUT format used by the chip is linear11 and not
+		 * linear16, we disregard bits[15:11]. The exponent is reported
+		 * as part of the VOUT_MODE command.
+		 */
+		if (data->vout_mode == linear)
+			ret = ((s16)((ret & 0x7ff) << 5)) >> 5;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static struct pmbus_driver_info mp5926_info = {
+	.pages = PAGE,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_CURRENT_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.format[PSC_POWER] = direct,
+
+	.m[PSC_VOLTAGE_IN] = 16,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 0,
+
+	.m[PSC_CURRENT_IN] = 16,
+	.b[PSC_CURRENT_IN] = 0,
+	.R[PSC_CURRENT_IN] = 0,
+
+	.m[PSC_VOLTAGE_OUT] = 16,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = 0,
+
+	.m[PSC_TEMPERATURE] = 4,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 0,
+
+	.m[PSC_POWER] = 25,
+	.b[PSC_POWER] = 0,
+	.R[PSC_POWER] = -2,
+
+	.read_word_data = mp5926_read_word_data,
+	.read_byte_data = mp5926_read_byte_data,
+	.func[0] = MP5926_FUNC,
+};
+
+static int mp5926_probe(struct i2c_client *client)
+{
+	struct mp5926_data *data;
+	struct pmbus_driver_info *info;
+	int ret;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct mp5926_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	memcpy(&data->info, &mp5926_info, sizeof(*info));
+	info = &data->info;
+	ret = i2c_smbus_read_word_data(client, EFUSE_CFG);
+	if (ret < 0)
+		return ret;
+	if (ret & BIT(12)) {
+		data->vout_mode = linear;
+		data->info.format[PSC_VOLTAGE_IN] = linear;
+		data->info.format[PSC_CURRENT_IN] = linear;
+		data->info.format[PSC_VOLTAGE_OUT] = linear;
+		data->info.format[PSC_TEMPERATURE] = linear;
+		data->info.format[PSC_POWER] = linear;
+		ret = i2c_smbus_read_word_data(client, PMBUS_READ_VOUT);
+		if (ret < 0)
+			return dev_err_probe(&client->dev, ret, "Can't get vout exponent.");
+		data->vout_linear_exponent = (u8)((ret >> 11) & 0x1f);
+	} else {
+		data->vout_mode = direct;
+		ret = i2c_smbus_read_word_data(client, I_SCALE_SEL);
+		if (ret < 0)
+			return ret;
+		if (ret & BIT(6))
+			data->info.m[PSC_CURRENT_IN] = 4;
+	}
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id mp5926_id[] = {
+	{ "mp5926", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, mp5926_id);
+
+static const struct of_device_id mp5926_of_match[] = {
+	{ .compatible = "mps,mp5926" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mp5926_of_match);
+
+static struct i2c_driver mp5926_driver = {
+	.probe = mp5926_probe,
+	.driver = {
+			.name = "mp5926",
+			.of_match_table = mp5926_of_match,
+		   },
+	.id_table = mp5926_id,
+};
+
+module_i2c_driver(mp5926_driver);
+MODULE_AUTHOR("Yuxi Wang <Yuxi.Wang@monolithicpower.com>");
+MODULE_DESCRIPTION("MPS MP5926 pmbus driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("PMBUS");