pinctrl: cy8c95x0; Switch to use for_each_set_clump8()

for_each_set_clump8() has embedded check for unset clump to skip.
Switch driver to use for_each_set_clump8().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250205095243.512292-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Andy Shevchenko 2025-02-05 11:51:12 +02:00 committed by Linus Walleij
parent e9330dc9b3
commit 83e29a7a1f

View file

@ -617,21 +617,18 @@ static int cy8c95x0_write_regs_mask(struct cy8c95x0_pinctrl *chip, int reg,
{
DECLARE_BITMAP(tmask, MAX_LINE);
DECLARE_BITMAP(tval, MAX_LINE);
unsigned long bits, offset;
int write_val;
u8 bits;
int ret;
/* Add the 4 bit gap of Gport2 */
bitmap_scatter(tmask, mask, chip->map, MAX_LINE);
bitmap_scatter(tval, val, chip->map, MAX_LINE);
for (unsigned int i = 0; i < chip->nport; i++) {
/* Skip over unused banks */
bits = bitmap_get_value8(tmask, i * BANK_SZ);
if (!bits)
continue;
for_each_set_clump8(offset, bits, tmask, chip->tpin) {
unsigned int i = offset / 8;
write_val = bitmap_get_value8(tval, i * BANK_SZ);
write_val = bitmap_get_value8(tval, offset);
ret = cy8c95x0_regmap_update_bits(chip, reg, i, bits, write_val);
if (ret < 0) {
@ -648,19 +645,16 @@ static int cy8c95x0_read_regs_mask(struct cy8c95x0_pinctrl *chip, int reg,
{
DECLARE_BITMAP(tmask, MAX_LINE);
DECLARE_BITMAP(tval, MAX_LINE);
unsigned long bits, offset;
int read_val;
u8 bits;
int ret;
/* Add the 4 bit gap of Gport2 */
bitmap_scatter(tmask, mask, chip->map, MAX_LINE);
bitmap_scatter(tval, val, chip->map, MAX_LINE);
for (unsigned int i = 0; i < chip->nport; i++) {
/* Skip over unused banks */
bits = bitmap_get_value8(tmask, i * BANK_SZ);
if (!bits)
continue;
for_each_set_clump8(offset, bits, tmask, chip->tpin) {
unsigned int i = offset / 8;
ret = cy8c95x0_regmap_read(chip, reg, i, &read_val);
if (ret < 0) {
@ -669,8 +663,8 @@ static int cy8c95x0_read_regs_mask(struct cy8c95x0_pinctrl *chip, int reg,
}
read_val &= bits;
read_val |= bitmap_get_value8(tval, i * BANK_SZ) & ~bits;
bitmap_set_value8(tval, read_val, i * BANK_SZ);
read_val |= bitmap_get_value8(tval, offset) & ~bits;
bitmap_set_value8(tval, read_val, offset);
}
/* Fill the 4 bit gap of Gport2 */