mirror of
https://github.com/torvalds/linux.git
synced 2026-03-08 03:24:45 +01:00
dt-bindings: interrupt-controller: Add i.MX8qxp Display Controller interrupt controller
i.MX8qxp Display Controller has a built-in interrupt controller to support Enable/Status/Preset/Clear interrupt bit. Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250414035028.1561475-8-victor.liu@nxp.com
This commit is contained in:
Liu Ying
parent
c809469f25
commit
57e464a30d
1 changed files with 318 additions and 0 deletions
|
|
@ -0,0 +1,318 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/interrupt-controller/fsl,imx8qxp-dc-intc.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Freescale i.MX8qxp Display Controller interrupt controller
|
||||
|
||||
description: |
|
||||
The Display Controller has a built-in interrupt controller with the following
|
||||
features for all relevant HW events:
|
||||
|
||||
* Enable bit (mask)
|
||||
* Status bit (set by an HW event)
|
||||
* Preset bit (can be used by SW to set status)
|
||||
* Clear bit (used by SW to reset the status)
|
||||
|
||||
Each interrupt can be connected as IRQ (maskable) and/or NMI (non-maskable).
|
||||
Alternatively the un-masked trigger signals for all HW events are provided,
|
||||
allowing it to use a global interrupt controller instead.
|
||||
|
||||
Each interrupt can be protected against SW running in user mode. In that case,
|
||||
only privileged AHB access can control the interrupt status.
|
||||
|
||||
maintainers:
|
||||
- Liu Ying <victor.liu@nxp.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: fsl,imx8qxp-dc-intc
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
interrupt-controller: true
|
||||
|
||||
"#interrupt-cells":
|
||||
const: 1
|
||||
|
||||
interrupts:
|
||||
items:
|
||||
- description: store9 shadow load interrupt(blit engine)
|
||||
- description: store9 frame complete interrupt(blit engine)
|
||||
- description: store9 sequence complete interrupt(blit engine)
|
||||
- description:
|
||||
extdst0 shadow load interrupt
|
||||
(display controller, content stream 0)
|
||||
- description:
|
||||
extdst0 frame complete interrupt
|
||||
(display controller, content stream 0)
|
||||
- description:
|
||||
extdst0 sequence complete interrupt
|
||||
(display controller, content stream 0)
|
||||
- description:
|
||||
extdst4 shadow load interrupt
|
||||
(display controller, safety stream 0)
|
||||
- description:
|
||||
extdst4 frame complete interrupt
|
||||
(display controller, safety stream 0)
|
||||
- description:
|
||||
extdst4 sequence complete interrupt
|
||||
(display controller, safety stream 0)
|
||||
- description:
|
||||
extdst1 shadow load interrupt
|
||||
(display controller, content stream 1)
|
||||
- description:
|
||||
extdst1 frame complete interrupt
|
||||
(display controller, content stream 1)
|
||||
- description:
|
||||
extdst1 sequence complete interrupt
|
||||
(display controller, content stream 1)
|
||||
- description:
|
||||
extdst5 shadow load interrupt
|
||||
(display controller, safety stream 1)
|
||||
- description:
|
||||
extdst5 frame complete interrupt
|
||||
(display controller, safety stream 1)
|
||||
- description:
|
||||
extdst5 sequence complete interrupt
|
||||
(display controller, safety stream 1)
|
||||
- description:
|
||||
disengcfg0 shadow load interrupt
|
||||
(display controller, display stream 0)
|
||||
- description:
|
||||
disengcfg0 frame complete interrupt
|
||||
(display controller, display stream 0)
|
||||
- description:
|
||||
disengcfg0 sequence complete interrupt
|
||||
(display controller, display stream 0)
|
||||
- description:
|
||||
framegen0 programmable interrupt0
|
||||
(display controller, display stream 0)
|
||||
- description:
|
||||
framegen0 programmable interrupt1
|
||||
(display controller, display stream 0)
|
||||
- description:
|
||||
framegen0 programmable interrupt2
|
||||
(display controller, display stream 0)
|
||||
- description:
|
||||
framegen0 programmable interrupt3
|
||||
(display controller, display stream 0)
|
||||
- description:
|
||||
signature0 shadow load interrupt
|
||||
(display controller, display stream 0)
|
||||
- description:
|
||||
signature0 measurement valid interrupt
|
||||
(display controller, display stream 0)
|
||||
- description:
|
||||
signature0 error condition interrupt
|
||||
(display controller, display stream 0)
|
||||
- description:
|
||||
disengcfg1 shadow load interrupt
|
||||
(display controller, display stream 1)
|
||||
- description:
|
||||
disengcfg1 frame complete interrupt
|
||||
(display controller, display stream 1)
|
||||
- description:
|
||||
disengcfg1 sequence complete interrupt
|
||||
(display controller, display stream 1)
|
||||
- description:
|
||||
framegen1 programmable interrupt0
|
||||
(display controller, display stream 1)
|
||||
- description:
|
||||
framegen1 programmable interrupt1
|
||||
(display controller, display stream 1)
|
||||
- description:
|
||||
framegen1 programmable interrupt2
|
||||
(display controller, display stream 1)
|
||||
- description:
|
||||
framegen1 programmable interrupt3
|
||||
(display controller, display stream 1)
|
||||
- description:
|
||||
signature1 shadow load interrupt
|
||||
(display controller, display stream 1)
|
||||
- description:
|
||||
signature1 measurement valid interrupt
|
||||
(display controller, display stream 1)
|
||||
- description:
|
||||
signature1 error condition interrupt
|
||||
(display controller, display stream 1)
|
||||
- description: reserved
|
||||
- description:
|
||||
command sequencer error condition interrupt(command sequencer)
|
||||
- description:
|
||||
common control software interrupt0(common control)
|
||||
- description:
|
||||
common control software interrupt1(common control)
|
||||
- description:
|
||||
common control software interrupt2(common control)
|
||||
- description:
|
||||
common control software interrupt3(common control)
|
||||
- description:
|
||||
framegen0 synchronization status activated interrupt
|
||||
(display controller, safety stream 0)
|
||||
- description:
|
||||
framegen0 synchronization status deactivated interrupt
|
||||
(display controller, safety stream 0)
|
||||
- description:
|
||||
framegen0 synchronization status activated interrupt
|
||||
(display controller, content stream 0)
|
||||
- description:
|
||||
framegen0 synchronization status deactivated interrupt
|
||||
(display controller, content stream 0)
|
||||
- description:
|
||||
framegen1 synchronization status activated interrupt
|
||||
(display controller, safety stream 1)
|
||||
- description:
|
||||
framegen1 synchronization status deactivated interrupt
|
||||
(display controller, safety stream 1)
|
||||
- description:
|
||||
framegen1 synchronization status activated interrupt
|
||||
(display controller, content stream 1)
|
||||
- description:
|
||||
framegen1 synchronization status deactivated interrupt
|
||||
(display controller, content stream 1)
|
||||
minItems: 49
|
||||
|
||||
interrupt-names:
|
||||
items:
|
||||
- const: store9_shdload
|
||||
- const: store9_framecomplete
|
||||
- const: store9_seqcomplete
|
||||
- const: extdst0_shdload
|
||||
- const: extdst0_framecomplete
|
||||
- const: extdst0_seqcomplete
|
||||
- const: extdst4_shdload
|
||||
- const: extdst4_framecomplete
|
||||
- const: extdst4_seqcomplete
|
||||
- const: extdst1_shdload
|
||||
- const: extdst1_framecomplete
|
||||
- const: extdst1_seqcomplete
|
||||
- const: extdst5_shdload
|
||||
- const: extdst5_framecomplete
|
||||
- const: extdst5_seqcomplete
|
||||
- const: disengcfg_shdload0
|
||||
- const: disengcfg_framecomplete0
|
||||
- const: disengcfg_seqcomplete0
|
||||
- const: framegen0_int0
|
||||
- const: framegen0_int1
|
||||
- const: framegen0_int2
|
||||
- const: framegen0_int3
|
||||
- const: sig0_shdload
|
||||
- const: sig0_valid
|
||||
- const: sig0_error
|
||||
- const: disengcfg_shdload1
|
||||
- const: disengcfg_framecomplete1
|
||||
- const: disengcfg_seqcomplete1
|
||||
- const: framegen1_int0
|
||||
- const: framegen1_int1
|
||||
- const: framegen1_int2
|
||||
- const: framegen1_int3
|
||||
- const: sig1_shdload
|
||||
- const: sig1_valid
|
||||
- const: sig1_error
|
||||
- const: reserved
|
||||
- const: cmdseq_error
|
||||
- const: comctrl_sw0
|
||||
- const: comctrl_sw1
|
||||
- const: comctrl_sw2
|
||||
- const: comctrl_sw3
|
||||
- const: framegen0_primsync_on
|
||||
- const: framegen0_primsync_off
|
||||
- const: framegen0_secsync_on
|
||||
- const: framegen0_secsync_off
|
||||
- const: framegen1_primsync_on
|
||||
- const: framegen1_primsync_off
|
||||
- const: framegen1_secsync_on
|
||||
- const: framegen1_secsync_off
|
||||
minItems: 49
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- interrupt-controller
|
||||
- "#interrupt-cells"
|
||||
- interrupts
|
||||
- interrupt-names
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/clock/imx8-lpcg.h>
|
||||
|
||||
interrupt-controller@56180040 {
|
||||
compatible = "fsl,imx8qxp-dc-intc";
|
||||
reg = <0x56180040 0x60>;
|
||||
clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&dc0_irqsteer>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupts = <448>, <449>, <450>, <64>,
|
||||
<65>, <66>, <67>, <68>,
|
||||
<69>, <70>, <193>, <194>,
|
||||
<195>, <196>, <197>, <72>,
|
||||
<73>, <74>, <75>, <76>,
|
||||
<77>, <78>, <79>, <80>,
|
||||
<81>, <199>, <200>, <201>,
|
||||
<202>, <203>, <204>, <205>,
|
||||
<206>, <207>, <208>, <5>,
|
||||
<0>, <1>, <2>, <3>,
|
||||
<4>, <82>, <83>, <84>,
|
||||
<85>, <209>, <210>, <211>,
|
||||
<212>;
|
||||
interrupt-names = "store9_shdload",
|
||||
"store9_framecomplete",
|
||||
"store9_seqcomplete",
|
||||
"extdst0_shdload",
|
||||
"extdst0_framecomplete",
|
||||
"extdst0_seqcomplete",
|
||||
"extdst4_shdload",
|
||||
"extdst4_framecomplete",
|
||||
"extdst4_seqcomplete",
|
||||
"extdst1_shdload",
|
||||
"extdst1_framecomplete",
|
||||
"extdst1_seqcomplete",
|
||||
"extdst5_shdload",
|
||||
"extdst5_framecomplete",
|
||||
"extdst5_seqcomplete",
|
||||
"disengcfg_shdload0",
|
||||
"disengcfg_framecomplete0",
|
||||
"disengcfg_seqcomplete0",
|
||||
"framegen0_int0",
|
||||
"framegen0_int1",
|
||||
"framegen0_int2",
|
||||
"framegen0_int3",
|
||||
"sig0_shdload",
|
||||
"sig0_valid",
|
||||
"sig0_error",
|
||||
"disengcfg_shdload1",
|
||||
"disengcfg_framecomplete1",
|
||||
"disengcfg_seqcomplete1",
|
||||
"framegen1_int0",
|
||||
"framegen1_int1",
|
||||
"framegen1_int2",
|
||||
"framegen1_int3",
|
||||
"sig1_shdload",
|
||||
"sig1_valid",
|
||||
"sig1_error",
|
||||
"reserved",
|
||||
"cmdseq_error",
|
||||
"comctrl_sw0",
|
||||
"comctrl_sw1",
|
||||
"comctrl_sw2",
|
||||
"comctrl_sw3",
|
||||
"framegen0_primsync_on",
|
||||
"framegen0_primsync_off",
|
||||
"framegen0_secsync_on",
|
||||
"framegen0_secsync_off",
|
||||
"framegen1_primsync_on",
|
||||
"framegen1_primsync_off",
|
||||
"framegen1_secsync_on",
|
||||
"framegen1_secsync_off";
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue